diff options
Diffstat (limited to 'drivers/regulator/twl-regulator.c')
| -rw-r--r-- | drivers/regulator/twl-regulator.c | 676 |
1 files changed, 676 insertions, 0 deletions
diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c new file mode 100644 index 000000000..e2a20d512 --- /dev/null +++ b/drivers/regulator/twl-regulator.c @@ -0,0 +1,676 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * twl-regulator.c -- support regulators in twl4030/twl6030 family chips + * + * Copyright (C) 2008 David Brownell + */ + +#include <linux/module.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/of_regulator.h> +#include <linux/mfd/twl.h> +#include <linux/delay.h> + +/* + * The TWL4030/TW5030/TPS659x0 family chips include power management, a + * USB OTG transceiver, an RTC, ADC, PWM, and lots more. Some versions + * include an audio codec, battery charger, and more voltage regulators. + * These chips are often used in OMAP-based systems. + * + * This driver implements software-based resource control for various + * voltage regulators. This is usually augmented with state machine + * based control. + */ + +struct twlreg_info { + /* start of regulator's PM_RECEIVER control register bank */ + u8 base; + + /* twl resource ID, for resource control state machine */ + u8 id; + + /* voltage in mV = table[VSEL]; table_len must be a power-of-two */ + u8 table_len; + const u16 *table; + + /* State REMAP default configuration */ + u8 remap; + + /* used by regulator core */ + struct regulator_desc desc; + + /* chip specific features */ + unsigned long features; + + /* data passed from board for external get/set voltage */ + void *data; +}; + + +/* LDO control registers ... offset is from the base of its register bank. + * The first three registers of all power resource banks help hardware to + * manage the various resource groups. + */ +/* Common offset in TWL4030/6030 */ +#define VREG_GRP 0 +/* TWL4030 register offsets */ +#define VREG_TYPE 1 +#define VREG_REMAP 2 +#define VREG_DEDICATED 3 /* LDO control */ +#define VREG_VOLTAGE_SMPS_4030 9 +/* TWL6030 register offsets */ +#define VREG_TRANS 1 +#define VREG_STATE 2 +#define VREG_VOLTAGE 3 +#define VREG_VOLTAGE_SMPS 4 + +static inline int +twlreg_read(struct twlreg_info *info, unsigned slave_subgp, unsigned offset) +{ + u8 value; + int status; + + status = twl_i2c_read_u8(slave_subgp, + &value, info->base + offset); + return (status < 0) ? status : value; +} + +static inline int +twlreg_write(struct twlreg_info *info, unsigned slave_subgp, unsigned offset, + u8 value) +{ + return twl_i2c_write_u8(slave_subgp, + value, info->base + offset); +} + +/*----------------------------------------------------------------------*/ + +/* generic power resource operations, which work on all regulators */ + +static int twlreg_grp(struct regulator_dev *rdev) +{ + return twlreg_read(rdev_get_drvdata(rdev), TWL_MODULE_PM_RECEIVER, + VREG_GRP); +} + +/* + * Enable/disable regulators by joining/leaving the P1 (processor) group. + * We assume nobody else is updating the DEV_GRP registers. + */ +/* definition for 4030 family */ +#define P3_GRP_4030 BIT(7) /* "peripherals" */ +#define P2_GRP_4030 BIT(6) /* secondary processor, modem, etc */ +#define P1_GRP_4030 BIT(5) /* CPU/Linux */ +/* definition for 6030 family */ +#define P3_GRP_6030 BIT(2) /* secondary processor, modem, etc */ +#define P2_GRP_6030 BIT(1) /* "peripherals" */ +#define P1_GRP_6030 BIT(0) /* CPU/Linux */ + +static int twl4030reg_is_enabled(struct regulator_dev *rdev) +{ + int state = twlreg_grp(rdev); + + if (state < 0) + return state; + + return state & P1_GRP_4030; +} + +#define PB_I2C_BUSY BIT(0) +#define PB_I2C_BWEN BIT(1) + +/* Wait until buffer empty/ready to send a word on power bus. */ +static int twl4030_wait_pb_ready(void) +{ + + int ret; + int timeout = 10; + u8 val; + + do { + ret = twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &val, + TWL4030_PM_MASTER_PB_CFG); + if (ret < 0) + return ret; + + if (!(val & PB_I2C_BUSY)) + return 0; + + mdelay(1); + timeout--; + } while (timeout); + + return -ETIMEDOUT; +} + +/* Send a word over the powerbus */ +static int twl4030_send_pb_msg(unsigned msg) +{ + u8 val; + int ret; + + /* save powerbus configuration */ + ret = twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &val, + TWL4030_PM_MASTER_PB_CFG); + if (ret < 0) + return ret; + + /* Enable i2c access to powerbus */ + ret = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, val | PB_I2C_BWEN, + TWL4030_PM_MASTER_PB_CFG); + if (ret < 0) + return ret; + + ret = twl4030_wait_pb_ready(); + if (ret < 0) + return ret; + + ret = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, msg >> 8, + TWL4030_PM_MASTER_PB_WORD_MSB); + if (ret < 0) + return ret; + + ret = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, msg & 0xff, + TWL4030_PM_MASTER_PB_WORD_LSB); + if (ret < 0) + return ret; + + ret = twl4030_wait_pb_ready(); + if (ret < 0) + return ret; + + /* Restore powerbus configuration */ + return twl_i2c_write_u8(TWL_MODULE_PM_MASTER, val, + TWL4030_PM_MASTER_PB_CFG); +} + +static int twl4030reg_enable(struct regulator_dev *rdev) +{ + struct twlreg_info *info = rdev_get_drvdata(rdev); + int grp; + + grp = twlreg_grp(rdev); + if (grp < 0) + return grp; + + grp |= P1_GRP_4030; + + return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp); +} + +static int twl4030reg_disable(struct regulator_dev *rdev) +{ + struct twlreg_info *info = rdev_get_drvdata(rdev); + int grp; + + grp = twlreg_grp(rdev); + if (grp < 0) + return grp; + + grp &= ~(P1_GRP_4030 | P2_GRP_4030 | P3_GRP_4030); + + return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp); +} + +static int twl4030reg_get_status(struct regulator_dev *rdev) +{ + int state = twlreg_grp(rdev); + + if (state < 0) + return state; + state &= 0x0f; + + /* assume state != WARM_RESET; we'd not be running... */ + if (!state) + return REGULATOR_STATUS_OFF; + return (state & BIT(3)) + ? REGULATOR_STATUS_NORMAL + : REGULATOR_STATUS_STANDBY; +} + +static int twl4030reg_set_mode(struct regulator_dev *rdev, unsigned mode) +{ + struct twlreg_info *info = rdev_get_drvdata(rdev); + unsigned message; + + /* We can only set the mode through state machine commands... */ + switch (mode) { + case REGULATOR_MODE_NORMAL: + message = MSG_SINGULAR(DEV_GRP_P1, info->id, RES_STATE_ACTIVE); + break; + case REGULATOR_MODE_STANDBY: + message = MSG_SINGULAR(DEV_GRP_P1, info->id, RES_STATE_SLEEP); + break; + default: + return -EINVAL; + } + + return twl4030_send_pb_msg(message); +} + +static inline unsigned int twl4030reg_map_mode(unsigned int mode) +{ + switch (mode) { + case RES_STATE_ACTIVE: + return REGULATOR_MODE_NORMAL; + case RES_STATE_SLEEP: + return REGULATOR_MODE_STANDBY; + default: + return REGULATOR_MODE_INVALID; + } +} + +/*----------------------------------------------------------------------*/ + +/* + * Support for adjustable-voltage LDOs uses a four bit (or less) voltage + * select field in its control register. We use tables indexed by VSEL + * to record voltages in milliVolts. (Accuracy is about three percent.) + * + * Note that VSEL values for VAUX2 changed in twl5030 and newer silicon; + * currently handled by listing two slightly different VAUX2 regulators, + * only one of which will be configured. + * + * VSEL values documented as "TI cannot support these values" are flagged + * in these tables as UNSUP() values; we normally won't assign them. + * + * VAUX3 at 3V is incorrectly listed in some TI manuals as unsupported. + * TI are revising the twl5030/tps659x0 specs to support that 3.0V setting. + */ +#define UNSUP_MASK 0x8000 + +#define UNSUP(x) (UNSUP_MASK | (x)) +#define IS_UNSUP(info, x) \ + ((UNSUP_MASK & (x)) && \ + !((info)->features & TWL4030_ALLOW_UNSUPPORTED)) +#define LDO_MV(x) (~UNSUP_MASK & (x)) + + +static const u16 VAUX1_VSEL_table[] = { + UNSUP(1500), UNSUP(1800), 2500, 2800, + 3000, 3000, 3000, 3000, +}; +static const u16 VAUX2_4030_VSEL_table[] = { + UNSUP(1000), UNSUP(1000), UNSUP(1200), 1300, + 1500, 1800, UNSUP(1850), 2500, + UNSUP(2600), 2800, UNSUP(2850), UNSUP(3000), + UNSUP(3150), UNSUP(3150), UNSUP(3150), UNSUP(3150), +}; +static const u16 VAUX2_VSEL_table[] = { + 1700, 1700, 1900, 1300, + 1500, 1800, 2000, 2500, + 2100, 2800, 2200, 2300, + 2400, 2400, 2400, 2400, +}; +static const u16 VAUX3_VSEL_table[] = { + 1500, 1800, 2500, 2800, + 3000, 3000, 3000, 3000, +}; +static const u16 VAUX4_VSEL_table[] = { + 700, 1000, 1200, UNSUP(1300), + 1500, 1800, UNSUP(1850), 2500, + UNSUP(2600), 2800, UNSUP(2850), UNSUP(3000), + UNSUP(3150), UNSUP(3150), UNSUP(3150), UNSUP(3150), +}; +static const u16 VMMC1_VSEL_table[] = { + 1850, 2850, 3000, 3150, +}; +static const u16 VMMC2_VSEL_table[] = { + UNSUP(1000), UNSUP(1000), UNSUP(1200), UNSUP(1300), + UNSUP(1500), UNSUP(1800), 1850, UNSUP(2500), + 2600, 2800, 2850, 3000, + 3150, 3150, 3150, 3150, +}; +static const u16 VPLL1_VSEL_table[] = { + 1000, 1200, 1300, 1800, + UNSUP(2800), UNSUP(3000), UNSUP(3000), UNSUP(3000), +}; +static const u16 VPLL2_VSEL_table[] = { + 700, 1000, 1200, 1300, + UNSUP(1500), 1800, UNSUP(1850), UNSUP(2500), + UNSUP(2600), UNSUP(2800), UNSUP(2850), UNSUP(3000), + UNSUP(3150), UNSUP(3150), UNSUP(3150), UNSUP(3150), +}; +static const u16 VSIM_VSEL_table[] = { + UNSUP(1000), UNSUP(1200), UNSUP(1300), 1800, + 2800, 3000, 3000, 3000, +}; +static const u16 VDAC_VSEL_table[] = { + 1200, 1300, 1800, 1800, +}; +static const u16 VIO_VSEL_table[] = { + 1800, 1850, +}; +static const u16 VINTANA2_VSEL_table[] = { + 2500, 2750, +}; + +/* 600mV to 1450mV in 12.5 mV steps */ +static const struct linear_range VDD1_ranges[] = { + REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500) +}; + +/* 600mV to 1450mV in 12.5 mV steps, everything above = 1500mV */ +static const struct linear_range VDD2_ranges[] = { + REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500), + REGULATOR_LINEAR_RANGE(1500000, 69, 69, 12500) +}; + +static int twl4030ldo_list_voltage(struct regulator_dev *rdev, unsigned index) +{ + struct twlreg_info *info = rdev_get_drvdata(rdev); + int mV = info->table[index]; + + return IS_UNSUP(info, mV) ? 0 : (LDO_MV(mV) * 1000); +} + +static int +twl4030ldo_set_voltage_sel(struct regulator_dev *rdev, unsigned selector) +{ + struct twlreg_info *info = rdev_get_drvdata(rdev); + + return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE, + selector); +} + +static int twl4030ldo_get_voltage_sel(struct regulator_dev *rdev) +{ + struct twlreg_info *info = rdev_get_drvdata(rdev); + int vsel = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE); + + if (vsel < 0) + return vsel; + + vsel &= info->table_len - 1; + return vsel; +} + +static const struct regulator_ops twl4030ldo_ops = { + .list_voltage = twl4030ldo_list_voltage, + + .set_voltage_sel = twl4030ldo_set_voltage_sel, + .get_voltage_sel = twl4030ldo_get_voltage_sel, + + .enable = twl4030reg_enable, + .disable = twl4030reg_disable, + .is_enabled = twl4030reg_is_enabled, + + .set_mode = twl4030reg_set_mode, + + .get_status = twl4030reg_get_status, +}; + +static int +twl4030smps_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV, + unsigned *selector) +{ + struct twlreg_info *info = rdev_get_drvdata(rdev); + int vsel = DIV_ROUND_UP(min_uV - 600000, 12500); + + twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE_SMPS_4030, vsel); + + return 0; +} + +static int twl4030smps_get_voltage(struct regulator_dev *rdev) +{ + struct twlreg_info *info = rdev_get_drvdata(rdev); + int vsel; + + vsel = twlreg_read(info, TWL_MODULE_PM_RECEIVER, + VREG_VOLTAGE_SMPS_4030); + + return vsel * 12500 + 600000; +} + +static const struct regulator_ops twl4030smps_ops = { + .list_voltage = regulator_list_voltage_linear_range, + + .set_voltage = twl4030smps_set_voltage, + .get_voltage = twl4030smps_get_voltage, +}; + +/*----------------------------------------------------------------------*/ + +static const struct regulator_ops twl4030fixed_ops = { + .list_voltage = regulator_list_voltage_linear, + + .enable = twl4030reg_enable, + .disable = twl4030reg_disable, + .is_enabled = twl4030reg_is_enabled, + + .set_mode = twl4030reg_set_mode, + + .get_status = twl4030reg_get_status, +}; + +/*----------------------------------------------------------------------*/ + +#define TWL4030_ADJUSTABLE_LDO(label, offset, num, turnon_delay, remap_conf) \ +static const struct twlreg_info TWL4030_INFO_##label = { \ + .base = offset, \ + .id = num, \ + .table_len = ARRAY_SIZE(label##_VSEL_table), \ + .table = label##_VSEL_table, \ + .remap = remap_conf, \ + .desc = { \ + .name = #label, \ + .id = TWL4030_REG_##label, \ + .n_voltages = ARRAY_SIZE(label##_VSEL_table), \ + .ops = &twl4030ldo_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .enable_time = turnon_delay, \ + .of_map_mode = twl4030reg_map_mode, \ + }, \ + } + +#define TWL4030_ADJUSTABLE_SMPS(label, offset, num, turnon_delay, remap_conf, \ + n_volt) \ +static const struct twlreg_info TWL4030_INFO_##label = { \ + .base = offset, \ + .id = num, \ + .remap = remap_conf, \ + .desc = { \ + .name = #label, \ + .id = TWL4030_REG_##label, \ + .ops = &twl4030smps_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .enable_time = turnon_delay, \ + .of_map_mode = twl4030reg_map_mode, \ + .n_voltages = n_volt, \ + .n_linear_ranges = ARRAY_SIZE(label ## _ranges), \ + .linear_ranges = label ## _ranges, \ + }, \ + } + +#define TWL4030_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \ + remap_conf) \ +static const struct twlreg_info TWLFIXED_INFO_##label = { \ + .base = offset, \ + .id = num, \ + .remap = remap_conf, \ + .desc = { \ + .name = #label, \ + .id = TWL4030##_REG_##label, \ + .n_voltages = 1, \ + .ops = &twl4030fixed_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = mVolts * 1000, \ + .enable_time = turnon_delay, \ + .of_map_mode = twl4030reg_map_mode, \ + }, \ + } + +/* + * We list regulators here if systems need some level of + * software control over them after boot. + */ +TWL4030_ADJUSTABLE_LDO(VAUX1, 0x17, 1, 100, 0x08); +TWL4030_ADJUSTABLE_LDO(VAUX2_4030, 0x1b, 2, 100, 0x08); +TWL4030_ADJUSTABLE_LDO(VAUX2, 0x1b, 2, 100, 0x08); +TWL4030_ADJUSTABLE_LDO(VAUX3, 0x1f, 3, 100, 0x08); +TWL4030_ADJUSTABLE_LDO(VAUX4, 0x23, 4, 100, 0x08); +TWL4030_ADJUSTABLE_LDO(VMMC1, 0x27, 5, 100, 0x08); +TWL4030_ADJUSTABLE_LDO(VMMC2, 0x2b, 6, 100, 0x08); +TWL4030_ADJUSTABLE_LDO(VPLL1, 0x2f, 7, 100, 0x00); +TWL4030_ADJUSTABLE_LDO(VPLL2, 0x33, 8, 100, 0x08); +TWL4030_ADJUSTABLE_LDO(VSIM, 0x37, 9, 100, 0x00); +TWL4030_ADJUSTABLE_LDO(VDAC, 0x3b, 10, 100, 0x08); +TWL4030_ADJUSTABLE_LDO(VINTANA2, 0x43, 12, 100, 0x08); +TWL4030_ADJUSTABLE_LDO(VIO, 0x4b, 14, 1000, 0x08); +TWL4030_ADJUSTABLE_SMPS(VDD1, 0x55, 15, 1000, 0x08, 68); +TWL4030_ADJUSTABLE_SMPS(VDD2, 0x63, 16, 1000, 0x08, 69); +/* VUSBCP is managed *only* by the USB subchip */ +TWL4030_FIXED_LDO(VINTANA1, 0x3f, 1500, 11, 100, 0x08); +TWL4030_FIXED_LDO(VINTDIG, 0x47, 1500, 13, 100, 0x08); +TWL4030_FIXED_LDO(VUSB1V5, 0x71, 1500, 17, 100, 0x08); +TWL4030_FIXED_LDO(VUSB1V8, 0x74, 1800, 18, 100, 0x08); +TWL4030_FIXED_LDO(VUSB3V1, 0x77, 3100, 19, 150, 0x08); + +#define TWL_OF_MATCH(comp, family, label) \ + { \ + .compatible = comp, \ + .data = &family##_INFO_##label, \ + } + +#define TWL4030_OF_MATCH(comp, label) TWL_OF_MATCH(comp, TWL4030, label) +#define TWL6030_OF_MATCH(comp, label) TWL_OF_MATCH(comp, TWL6030, label) +#define TWL6032_OF_MATCH(comp, label) TWL_OF_MATCH(comp, TWL6032, label) +#define TWLFIXED_OF_MATCH(comp, label) TWL_OF_MATCH(comp, TWLFIXED, label) +#define TWLSMPS_OF_MATCH(comp, label) TWL_OF_MATCH(comp, TWLSMPS, label) + +static const struct of_device_id twl_of_match[] = { + TWL4030_OF_MATCH("ti,twl4030-vaux1", VAUX1), + TWL4030_OF_MATCH("ti,twl4030-vaux2", VAUX2_4030), + TWL4030_OF_MATCH("ti,twl5030-vaux2", VAUX2), + TWL4030_OF_MATCH("ti,twl4030-vaux3", VAUX3), + TWL4030_OF_MATCH("ti,twl4030-vaux4", VAUX4), + TWL4030_OF_MATCH("ti,twl4030-vmmc1", VMMC1), + TWL4030_OF_MATCH("ti,twl4030-vmmc2", VMMC2), + TWL4030_OF_MATCH("ti,twl4030-vpll1", VPLL1), + TWL4030_OF_MATCH("ti,twl4030-vpll2", VPLL2), + TWL4030_OF_MATCH("ti,twl4030-vsim", VSIM), + TWL4030_OF_MATCH("ti,twl4030-vdac", VDAC), + TWL4030_OF_MATCH("ti,twl4030-vintana2", VINTANA2), + TWL4030_OF_MATCH("ti,twl4030-vio", VIO), + TWL4030_OF_MATCH("ti,twl4030-vdd1", VDD1), + TWL4030_OF_MATCH("ti,twl4030-vdd2", VDD2), + TWLFIXED_OF_MATCH("ti,twl4030-vintana1", VINTANA1), + TWLFIXED_OF_MATCH("ti,twl4030-vintdig", VINTDIG), + TWLFIXED_OF_MATCH("ti,twl4030-vusb1v5", VUSB1V5), + TWLFIXED_OF_MATCH("ti,twl4030-vusb1v8", VUSB1V8), + TWLFIXED_OF_MATCH("ti,twl4030-vusb3v1", VUSB3V1), + {}, +}; +MODULE_DEVICE_TABLE(of, twl_of_match); + +static int twlreg_probe(struct platform_device *pdev) +{ + int id; + struct twlreg_info *info; + const struct twlreg_info *template; + struct regulator_init_data *initdata; + struct regulation_constraints *c; + struct regulator_dev *rdev; + struct regulator_config config = { }; + + template = of_device_get_match_data(&pdev->dev); + if (!template) + return -ENODEV; + + id = template->desc.id; + initdata = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node, + &template->desc); + if (!initdata) + return -EINVAL; + + info = devm_kmemdup(&pdev->dev, template, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + /* Constrain board-specific capabilities according to what + * this driver and the chip itself can actually do. + */ + c = &initdata->constraints; + c->valid_modes_mask &= REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY; + c->valid_ops_mask &= REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS; + switch (id) { + case TWL4030_REG_VIO: + case TWL4030_REG_VDD1: + case TWL4030_REG_VDD2: + case TWL4030_REG_VPLL1: + case TWL4030_REG_VINTANA1: + case TWL4030_REG_VINTANA2: + case TWL4030_REG_VINTDIG: + c->always_on = true; + break; + default: + break; + } + + config.dev = &pdev->dev; + config.init_data = initdata; + config.driver_data = info; + config.of_node = pdev->dev.of_node; + + rdev = devm_regulator_register(&pdev->dev, &info->desc, &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "can't register %s, %ld\n", + info->desc.name, PTR_ERR(rdev)); + return PTR_ERR(rdev); + } + platform_set_drvdata(pdev, rdev); + + twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_REMAP, info->remap); + + /* NOTE: many regulators support short-circuit IRQs (presentable + * as REGULATOR_OVER_CURRENT notifications?) configured via: + * - SC_CONFIG + * - SC_DETECT1 (vintana2, vmmc1/2, vaux1/2/3/4) + * - SC_DETECT2 (vusb, vdac, vio, vdd1/2, vpll2) + * - IT_CONFIG + */ + + return 0; +} + +MODULE_ALIAS("platform:twl4030_reg"); + +static struct platform_driver twlreg_driver = { + .probe = twlreg_probe, + /* NOTE: short name, to work around driver model truncation of + * "twl_regulator.12" (and friends) to "twl_regulator.1". + */ + .driver = { + .name = "twl4030_reg", + .of_match_table = of_match_ptr(twl_of_match), + }, +}; + +static int __init twlreg_init(void) +{ + return platform_driver_register(&twlreg_driver); +} +subsys_initcall(twlreg_init); + +static void __exit twlreg_exit(void) +{ + platform_driver_unregister(&twlreg_driver); +} +module_exit(twlreg_exit) + +MODULE_DESCRIPTION("TWL4030 regulator driver"); +MODULE_LICENSE("GPL"); |