diff options
Diffstat (limited to 'drivers/scsi/bfa/bfi_reg.h')
| -rw-r--r-- | drivers/scsi/bfa/bfi_reg.h | 452 |
1 files changed, 452 insertions, 0 deletions
diff --git a/drivers/scsi/bfa/bfi_reg.h b/drivers/scsi/bfa/bfi_reg.h new file mode 100644 index 000000000..0803b710a --- /dev/null +++ b/drivers/scsi/bfa/bfi_reg.h @@ -0,0 +1,452 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2005-2014 Brocade Communications Systems, Inc. + * Copyright (c) 2014- QLogic Corporation. + * All rights reserved + * www.qlogic.com + * + * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter. + */ + +/* + * bfi_reg.h ASIC register defines for all QLogic BR-series adapter ASICs + */ + +#ifndef __BFI_REG_H__ +#define __BFI_REG_H__ + +#define HOSTFN0_INT_STATUS 0x00014000 /* cb/ct */ +#define HOSTFN1_INT_STATUS 0x00014100 /* cb/ct */ +#define HOSTFN2_INT_STATUS 0x00014300 /* ct */ +#define HOSTFN3_INT_STATUS 0x00014400 /* ct */ +#define HOSTFN0_INT_MSK 0x00014004 /* cb/ct */ +#define HOSTFN1_INT_MSK 0x00014104 /* cb/ct */ +#define HOSTFN2_INT_MSK 0x00014304 /* ct */ +#define HOSTFN3_INT_MSK 0x00014404 /* ct */ + +#define HOST_PAGE_NUM_FN0 0x00014008 /* cb/ct */ +#define HOST_PAGE_NUM_FN1 0x00014108 /* cb/ct */ +#define HOST_PAGE_NUM_FN2 0x00014308 /* ct */ +#define HOST_PAGE_NUM_FN3 0x00014408 /* ct */ + +#define APP_PLL_LCLK_CTL_REG 0x00014204 /* cb/ct */ +#define __P_LCLK_PLL_LOCK 0x80000000 +#define __APP_PLL_LCLK_SRAM_USE_100MHZ 0x00100000 +#define __APP_PLL_LCLK_RESET_TIMER_MK 0x000e0000 +#define __APP_PLL_LCLK_RESET_TIMER_SH 17 +#define __APP_PLL_LCLK_RESET_TIMER(_v) ((_v) << __APP_PLL_LCLK_RESET_TIMER_SH) +#define __APP_PLL_LCLK_LOGIC_SOFT_RESET 0x00010000 +#define __APP_PLL_LCLK_CNTLMT0_1_MK 0x0000c000 +#define __APP_PLL_LCLK_CNTLMT0_1_SH 14 +#define __APP_PLL_LCLK_CNTLMT0_1(_v) ((_v) << __APP_PLL_LCLK_CNTLMT0_1_SH) +#define __APP_PLL_LCLK_JITLMT0_1_MK 0x00003000 +#define __APP_PLL_LCLK_JITLMT0_1_SH 12 +#define __APP_PLL_LCLK_JITLMT0_1(_v) ((_v) << __APP_PLL_LCLK_JITLMT0_1_SH) +#define __APP_PLL_LCLK_HREF 0x00000800 +#define __APP_PLL_LCLK_HDIV 0x00000400 +#define __APP_PLL_LCLK_P0_1_MK 0x00000300 +#define __APP_PLL_LCLK_P0_1_SH 8 +#define __APP_PLL_LCLK_P0_1(_v) ((_v) << __APP_PLL_LCLK_P0_1_SH) +#define __APP_PLL_LCLK_Z0_2_MK 0x000000e0 +#define __APP_PLL_LCLK_Z0_2_SH 5 +#define __APP_PLL_LCLK_Z0_2(_v) ((_v) << __APP_PLL_LCLK_Z0_2_SH) +#define __APP_PLL_LCLK_RSEL200500 0x00000010 +#define __APP_PLL_LCLK_ENARST 0x00000008 +#define __APP_PLL_LCLK_BYPASS 0x00000004 +#define __APP_PLL_LCLK_LRESETN 0x00000002 +#define __APP_PLL_LCLK_ENABLE 0x00000001 +#define APP_PLL_SCLK_CTL_REG 0x00014208 /* cb/ct */ +#define __P_SCLK_PLL_LOCK 0x80000000 +#define __APP_PLL_SCLK_RESET_TIMER_MK 0x000e0000 +#define __APP_PLL_SCLK_RESET_TIMER_SH 17 +#define __APP_PLL_SCLK_RESET_TIMER(_v) ((_v) << __APP_PLL_SCLK_RESET_TIMER_SH) +#define __APP_PLL_SCLK_LOGIC_SOFT_RESET 0x00010000 +#define __APP_PLL_SCLK_CNTLMT0_1_MK 0x0000c000 +#define __APP_PLL_SCLK_CNTLMT0_1_SH 14 +#define __APP_PLL_SCLK_CNTLMT0_1(_v) ((_v) << __APP_PLL_SCLK_CNTLMT0_1_SH) +#define __APP_PLL_SCLK_JITLMT0_1_MK 0x00003000 +#define __APP_PLL_SCLK_JITLMT0_1_SH 12 +#define __APP_PLL_SCLK_JITLMT0_1(_v) ((_v) << __APP_PLL_SCLK_JITLMT0_1_SH) +#define __APP_PLL_SCLK_HREF 0x00000800 +#define __APP_PLL_SCLK_HDIV 0x00000400 +#define __APP_PLL_SCLK_P0_1_MK 0x00000300 +#define __APP_PLL_SCLK_P0_1_SH 8 +#define __APP_PLL_SCLK_P0_1(_v) ((_v) << __APP_PLL_SCLK_P0_1_SH) +#define __APP_PLL_SCLK_Z0_2_MK 0x000000e0 +#define __APP_PLL_SCLK_Z0_2_SH 5 +#define __APP_PLL_SCLK_Z0_2(_v) ((_v) << __APP_PLL_SCLK_Z0_2_SH) +#define __APP_PLL_SCLK_RSEL200500 0x00000010 +#define __APP_PLL_SCLK_ENARST 0x00000008 +#define __APP_PLL_SCLK_BYPASS 0x00000004 +#define __APP_PLL_SCLK_LRESETN 0x00000002 +#define __APP_PLL_SCLK_ENABLE 0x00000001 +#define __ENABLE_MAC_AHB_1 0x00800000 /* ct */ +#define __ENABLE_MAC_AHB_0 0x00400000 /* ct */ +#define __ENABLE_MAC_1 0x00200000 /* ct */ +#define __ENABLE_MAC_0 0x00100000 /* ct */ + +#define HOST_SEM0_REG 0x00014230 /* cb/ct */ +#define HOST_SEM1_REG 0x00014234 /* cb/ct */ +#define HOST_SEM2_REG 0x00014238 /* cb/ct */ +#define HOST_SEM3_REG 0x0001423c /* cb/ct */ +#define HOST_SEM4_REG 0x00014610 /* cb/ct */ +#define HOST_SEM5_REG 0x00014614 /* cb/ct */ +#define HOST_SEM6_REG 0x00014618 /* cb/ct */ +#define HOST_SEM7_REG 0x0001461c /* cb/ct */ +#define HOST_SEM0_INFO_REG 0x00014240 /* cb/ct */ +#define HOST_SEM1_INFO_REG 0x00014244 /* cb/ct */ +#define HOST_SEM2_INFO_REG 0x00014248 /* cb/ct */ +#define HOST_SEM3_INFO_REG 0x0001424c /* cb/ct */ +#define HOST_SEM4_INFO_REG 0x00014620 /* cb/ct */ +#define HOST_SEM5_INFO_REG 0x00014624 /* cb/ct */ +#define HOST_SEM6_INFO_REG 0x00014628 /* cb/ct */ +#define HOST_SEM7_INFO_REG 0x0001462c /* cb/ct */ + +#define HOSTFN0_LPU0_CMD_STAT 0x00019000 /* cb/ct */ +#define HOSTFN0_LPU1_CMD_STAT 0x00019004 /* cb/ct */ +#define HOSTFN1_LPU0_CMD_STAT 0x00019010 /* cb/ct */ +#define HOSTFN1_LPU1_CMD_STAT 0x00019014 /* cb/ct */ +#define HOSTFN2_LPU0_CMD_STAT 0x00019150 /* ct */ +#define HOSTFN2_LPU1_CMD_STAT 0x00019154 /* ct */ +#define HOSTFN3_LPU0_CMD_STAT 0x00019160 /* ct */ +#define HOSTFN3_LPU1_CMD_STAT 0x00019164 /* ct */ +#define LPU0_HOSTFN0_CMD_STAT 0x00019008 /* cb/ct */ +#define LPU1_HOSTFN0_CMD_STAT 0x0001900c /* cb/ct */ +#define LPU0_HOSTFN1_CMD_STAT 0x00019018 /* cb/ct */ +#define LPU1_HOSTFN1_CMD_STAT 0x0001901c /* cb/ct */ +#define LPU0_HOSTFN2_CMD_STAT 0x00019158 /* ct */ +#define LPU1_HOSTFN2_CMD_STAT 0x0001915c /* ct */ +#define LPU0_HOSTFN3_CMD_STAT 0x00019168 /* ct */ +#define LPU1_HOSTFN3_CMD_STAT 0x0001916c /* ct */ + +#define PSS_CTL_REG 0x00018800 /* cb/ct */ +#define __PSS_I2C_CLK_DIV_MK 0x007f0000 +#define __PSS_I2C_CLK_DIV_SH 16 +#define __PSS_I2C_CLK_DIV(_v) ((_v) << __PSS_I2C_CLK_DIV_SH) +#define __PSS_LMEM_INIT_DONE 0x00001000 +#define __PSS_LMEM_RESET 0x00000200 +#define __PSS_LMEM_INIT_EN 0x00000100 +#define __PSS_LPU1_RESET 0x00000002 +#define __PSS_LPU0_RESET 0x00000001 +#define PSS_ERR_STATUS_REG 0x00018810 /* cb/ct */ +#define ERR_SET_REG 0x00018818 /* cb/ct */ +#define PSS_GPIO_OUT_REG 0x000188c0 /* cb/ct */ +#define __PSS_GPIO_OUT_REG 0x00000fff +#define PSS_GPIO_OE_REG 0x000188c8 /* cb/ct */ +#define __PSS_GPIO_OE_REG 0x000000ff + +#define HOSTFN0_LPU_MBOX0_0 0x00019200 /* cb/ct */ +#define HOSTFN1_LPU_MBOX0_8 0x00019260 /* cb/ct */ +#define LPU_HOSTFN0_MBOX0_0 0x00019280 /* cb/ct */ +#define LPU_HOSTFN1_MBOX0_8 0x000192e0 /* cb/ct */ +#define HOSTFN2_LPU_MBOX0_0 0x00019400 /* ct */ +#define HOSTFN3_LPU_MBOX0_8 0x00019460 /* ct */ +#define LPU_HOSTFN2_MBOX0_0 0x00019480 /* ct */ +#define LPU_HOSTFN3_MBOX0_8 0x000194e0 /* ct */ + +#define HOST_MSIX_ERR_INDEX_FN0 0x0001400c /* ct */ +#define HOST_MSIX_ERR_INDEX_FN1 0x0001410c /* ct */ +#define HOST_MSIX_ERR_INDEX_FN2 0x0001430c /* ct */ +#define HOST_MSIX_ERR_INDEX_FN3 0x0001440c /* ct */ + +#define MBIST_CTL_REG 0x00014220 /* ct */ +#define __EDRAM_BISTR_START 0x00000004 +#define MBIST_STAT_REG 0x00014224 /* ct */ +#define ETH_MAC_SER_REG 0x00014288 /* ct */ +#define __APP_EMS_CKBUFAMPIN 0x00000020 +#define __APP_EMS_REFCLKSEL 0x00000010 +#define __APP_EMS_CMLCKSEL 0x00000008 +#define __APP_EMS_REFCKBUFEN2 0x00000004 +#define __APP_EMS_REFCKBUFEN1 0x00000002 +#define __APP_EMS_CHANNEL_SEL 0x00000001 +#define FNC_PERS_REG 0x00014604 /* ct */ +#define __F3_FUNCTION_ACTIVE 0x80000000 +#define __F3_FUNCTION_MODE 0x40000000 +#define __F3_PORT_MAP_MK 0x30000000 +#define __F3_PORT_MAP_SH 28 +#define __F3_PORT_MAP(_v) ((_v) << __F3_PORT_MAP_SH) +#define __F3_VM_MODE 0x08000000 +#define __F3_INTX_STATUS_MK 0x07000000 +#define __F3_INTX_STATUS_SH 24 +#define __F3_INTX_STATUS(_v) ((_v) << __F3_INTX_STATUS_SH) +#define __F2_FUNCTION_ACTIVE 0x00800000 +#define __F2_FUNCTION_MODE 0x00400000 +#define __F2_PORT_MAP_MK 0x00300000 +#define __F2_PORT_MAP_SH 20 +#define __F2_PORT_MAP(_v) ((_v) << __F2_PORT_MAP_SH) +#define __F2_VM_MODE 0x00080000 +#define __F2_INTX_STATUS_MK 0x00070000 +#define __F2_INTX_STATUS_SH 16 +#define __F2_INTX_STATUS(_v) ((_v) << __F2_INTX_STATUS_SH) +#define __F1_FUNCTION_ACTIVE 0x00008000 +#define __F1_FUNCTION_MODE 0x00004000 +#define __F1_PORT_MAP_MK 0x00003000 +#define __F1_PORT_MAP_SH 12 +#define __F1_PORT_MAP(_v) ((_v) << __F1_PORT_MAP_SH) +#define __F1_VM_MODE 0x00000800 +#define __F1_INTX_STATUS_MK 0x00000700 +#define __F1_INTX_STATUS_SH 8 +#define __F1_INTX_STATUS(_v) ((_v) << __F1_INTX_STATUS_SH) +#define __F0_FUNCTION_ACTIVE 0x00000080 +#define __F0_FUNCTION_MODE 0x00000040 +#define __F0_PORT_MAP_MK 0x00000030 +#define __F0_PORT_MAP_SH 4 +#define __F0_PORT_MAP(_v) ((_v) << __F0_PORT_MAP_SH) +#define __F0_VM_MODE 0x00000008 +#define __F0_INTX_STATUS 0x00000007 +enum { + __F0_INTX_STATUS_MSIX = 0x0, + __F0_INTX_STATUS_INTA = 0x1, + __F0_INTX_STATUS_INTB = 0x2, + __F0_INTX_STATUS_INTC = 0x3, + __F0_INTX_STATUS_INTD = 0x4, +}; + +#define OP_MODE 0x0001460c /* ct */ +#define __APP_ETH_CLK_LOWSPEED 0x00000004 +#define __GLOBAL_CORECLK_HALFSPEED 0x00000002 +#define __GLOBAL_FCOE_MODE 0x00000001 +#define FW_INIT_HALT_P0 0x000191ac /* ct */ +#define __FW_INIT_HALT_P 0x00000001 +#define FW_INIT_HALT_P1 0x000191bc /* ct */ +#define PMM_1T_RESET_REG_P0 0x0002381c /* ct */ +#define __PMM_1T_RESET_P 0x00000001 +#define PMM_1T_RESET_REG_P1 0x00023c1c /* ct */ + +/** + * Catapult-2 specific defines + */ +#define CT2_PCI_CPQ_BASE 0x00030000 +#define CT2_PCI_APP_BASE 0x00030100 +#define CT2_PCI_ETH_BASE 0x00030400 + +/* + * APP block registers + */ +#define CT2_HOSTFN_INT_STATUS (CT2_PCI_APP_BASE + 0x00) +#define CT2_HOSTFN_INTR_MASK (CT2_PCI_APP_BASE + 0x04) +#define CT2_HOSTFN_PERSONALITY0 (CT2_PCI_APP_BASE + 0x08) +#define __PME_STATUS_ 0x00200000 +#define __PF_VF_BAR_SIZE_MODE__MK 0x00180000 +#define __PF_VF_BAR_SIZE_MODE__SH 19 +#define __PF_VF_BAR_SIZE_MODE_(_v) ((_v) << __PF_VF_BAR_SIZE_MODE__SH) +#define __FC_LL_PORT_MAP__MK 0x00060000 +#define __FC_LL_PORT_MAP__SH 17 +#define __FC_LL_PORT_MAP_(_v) ((_v) << __FC_LL_PORT_MAP__SH) +#define __PF_VF_ACTIVE_ 0x00010000 +#define __PF_VF_CFG_RDY_ 0x00008000 +#define __PF_VF_ENABLE_ 0x00004000 +#define __PF_DRIVER_ACTIVE_ 0x00002000 +#define __PF_PME_SEND_ENABLE_ 0x00001000 +#define __PF_EXROM_OFFSET__MK 0x00000ff0 +#define __PF_EXROM_OFFSET__SH 4 +#define __PF_EXROM_OFFSET_(_v) ((_v) << __PF_EXROM_OFFSET__SH) +#define __FC_LL_MODE_ 0x00000008 +#define __PF_INTX_PIN_ 0x00000007 +#define CT2_HOSTFN_PERSONALITY1 (CT2_PCI_APP_BASE + 0x0C) +#define __PF_NUM_QUEUES1__MK 0xff000000 +#define __PF_NUM_QUEUES1__SH 24 +#define __PF_NUM_QUEUES1_(_v) ((_v) << __PF_NUM_QUEUES1__SH) +#define __PF_VF_QUE_OFFSET1__MK 0x00ff0000 +#define __PF_VF_QUE_OFFSET1__SH 16 +#define __PF_VF_QUE_OFFSET1_(_v) ((_v) << __PF_VF_QUE_OFFSET1__SH) +#define __PF_VF_NUM_QUEUES__MK 0x0000ff00 +#define __PF_VF_NUM_QUEUES__SH 8 +#define __PF_VF_NUM_QUEUES_(_v) ((_v) << __PF_VF_NUM_QUEUES__SH) +#define __PF_VF_QUE_OFFSET_ 0x000000ff +#define CT2_HOSTFN_PAGE_NUM (CT2_PCI_APP_BASE + 0x18) +#define CT2_HOSTFN_MSIX_VT_INDEX_MBOX_ERR (CT2_PCI_APP_BASE + 0x38) + +/* + * Catapult-2 CPQ block registers + */ +#define CT2_HOSTFN_LPU0_MBOX0 (CT2_PCI_CPQ_BASE + 0x00) +#define CT2_HOSTFN_LPU1_MBOX0 (CT2_PCI_CPQ_BASE + 0x20) +#define CT2_LPU0_HOSTFN_MBOX0 (CT2_PCI_CPQ_BASE + 0x40) +#define CT2_LPU1_HOSTFN_MBOX0 (CT2_PCI_CPQ_BASE + 0x60) +#define CT2_HOSTFN_LPU0_CMD_STAT (CT2_PCI_CPQ_BASE + 0x80) +#define CT2_HOSTFN_LPU1_CMD_STAT (CT2_PCI_CPQ_BASE + 0x84) +#define CT2_LPU0_HOSTFN_CMD_STAT (CT2_PCI_CPQ_BASE + 0x88) +#define CT2_LPU1_HOSTFN_CMD_STAT (CT2_PCI_CPQ_BASE + 0x8c) +#define CT2_HOSTFN_LPU0_READ_STAT (CT2_PCI_CPQ_BASE + 0x90) +#define CT2_HOSTFN_LPU1_READ_STAT (CT2_PCI_CPQ_BASE + 0x94) +#define CT2_LPU0_HOSTFN_MBOX0_MSK (CT2_PCI_CPQ_BASE + 0x98) +#define CT2_LPU1_HOSTFN_MBOX0_MSK (CT2_PCI_CPQ_BASE + 0x9C) +#define CT2_HOST_SEM0_REG 0x000148f0 +#define CT2_HOST_SEM1_REG 0x000148f4 +#define CT2_HOST_SEM2_REG 0x000148f8 +#define CT2_HOST_SEM3_REG 0x000148fc +#define CT2_HOST_SEM4_REG 0x00014900 +#define CT2_HOST_SEM5_REG 0x00014904 +#define CT2_HOST_SEM6_REG 0x00014908 +#define CT2_HOST_SEM7_REG 0x0001490c +#define CT2_HOST_SEM0_INFO_REG 0x000148b0 +#define CT2_HOST_SEM1_INFO_REG 0x000148b4 +#define CT2_HOST_SEM2_INFO_REG 0x000148b8 +#define CT2_HOST_SEM3_INFO_REG 0x000148bc +#define CT2_HOST_SEM4_INFO_REG 0x000148c0 +#define CT2_HOST_SEM5_INFO_REG 0x000148c4 +#define CT2_HOST_SEM6_INFO_REG 0x000148c8 +#define CT2_HOST_SEM7_INFO_REG 0x000148cc + +#define CT2_APP_PLL_LCLK_CTL_REG 0x00014808 +#define __APP_LPUCLK_HALFSPEED 0x40000000 +#define __APP_PLL_LCLK_LOAD 0x20000000 +#define __APP_PLL_LCLK_FBCNT_MK 0x1fe00000 +#define __APP_PLL_LCLK_FBCNT_SH 21 +#define __APP_PLL_LCLK_FBCNT(_v) ((_v) << __APP_PLL_SCLK_FBCNT_SH) +enum { + __APP_PLL_LCLK_FBCNT_425_MHZ = 6, + __APP_PLL_LCLK_FBCNT_468_MHZ = 4, +}; +#define __APP_PLL_LCLK_EXTFB 0x00000800 +#define __APP_PLL_LCLK_ENOUTS 0x00000400 +#define __APP_PLL_LCLK_RATE 0x00000010 +#define CT2_APP_PLL_SCLK_CTL_REG 0x0001480c +#define __P_SCLK_PLL_LOCK 0x80000000 +#define __APP_PLL_SCLK_REFCLK_SEL 0x40000000 +#define __APP_PLL_SCLK_CLK_DIV2 0x20000000 +#define __APP_PLL_SCLK_LOAD 0x10000000 +#define __APP_PLL_SCLK_FBCNT_MK 0x0ff00000 +#define __APP_PLL_SCLK_FBCNT_SH 20 +#define __APP_PLL_SCLK_FBCNT(_v) ((_v) << __APP_PLL_SCLK_FBCNT_SH) +enum { + __APP_PLL_SCLK_FBCNT_NORM = 6, + __APP_PLL_SCLK_FBCNT_10G_FC = 10, +}; +#define __APP_PLL_SCLK_EXTFB 0x00000800 +#define __APP_PLL_SCLK_ENOUTS 0x00000400 +#define __APP_PLL_SCLK_RATE 0x00000010 +#define CT2_PCIE_MISC_REG 0x00014804 +#define __ETH_CLK_ENABLE_PORT1 0x00000010 +#define CT2_CHIP_MISC_PRG 0x000148a4 +#define __ETH_CLK_ENABLE_PORT0 0x00004000 +#define __APP_LPU_SPEED 0x00000002 +#define CT2_MBIST_STAT_REG 0x00014818 +#define CT2_MBIST_CTL_REG 0x0001481c +#define CT2_PMM_1T_CONTROL_REG_P0 0x0002381c +#define __PMM_1T_PNDB_P 0x00000002 +#define CT2_PMM_1T_CONTROL_REG_P1 0x00023c1c +#define CT2_WGN_STATUS 0x00014990 +#define __A2T_AHB_LOAD 0x00000800 +#define __WGN_READY 0x00000400 +#define __GLBL_PF_VF_CFG_RDY 0x00000200 +#define CT2_NFC_STS_REG 0x00027410 +#define CT2_NFC_CSR_CLR_REG 0x00027420 +#define CT2_NFC_CSR_SET_REG 0x00027424 +#define __HALT_NFC_CONTROLLER 0x00000002 +#define __NFC_CONTROLLER_HALTED 0x00001000 +#define CT2_RSC_GPR15_REG 0x0002765c +#define CT2_CSI_FW_CTL_REG 0x00027080 +#define CT2_CSI_FW_CTL_SET_REG 0x00027088 +#define __RESET_AND_START_SCLK_LCLK_PLLS 0x00010000 + +#define CT2_CSI_MAC0_CONTROL_REG 0x000270d0 +#define __CSI_MAC_RESET 0x00000010 +#define __CSI_MAC_AHB_RESET 0x00000008 +#define CT2_CSI_MAC1_CONTROL_REG 0x000270d4 +#define CT2_CSI_MAC_CONTROL_REG(__n) \ + (CT2_CSI_MAC0_CONTROL_REG + \ + (__n) * (CT2_CSI_MAC1_CONTROL_REG - CT2_CSI_MAC0_CONTROL_REG)) + +#define CT2_NFC_FLASH_STS_REG 0x00014834 +#define __FLASH_PLL_INIT_AND_RESET_IN_PROGRESS 0x00000020 +/* + * Name semaphore registers based on usage + */ +#define BFA_IOC0_HBEAT_REG HOST_SEM0_INFO_REG +#define BFA_IOC0_STATE_REG HOST_SEM1_INFO_REG +#define BFA_IOC1_HBEAT_REG HOST_SEM2_INFO_REG +#define BFA_IOC1_STATE_REG HOST_SEM3_INFO_REG +#define BFA_FW_USE_COUNT HOST_SEM4_INFO_REG +#define BFA_IOC_FAIL_SYNC HOST_SEM5_INFO_REG + +/* + * CT2 semaphore register locations changed + */ +#define CT2_BFA_IOC0_HBEAT_REG CT2_HOST_SEM0_INFO_REG +#define CT2_BFA_IOC0_STATE_REG CT2_HOST_SEM1_INFO_REG +#define CT2_BFA_IOC1_HBEAT_REG CT2_HOST_SEM2_INFO_REG +#define CT2_BFA_IOC1_STATE_REG CT2_HOST_SEM3_INFO_REG +#define CT2_BFA_FW_USE_COUNT CT2_HOST_SEM4_INFO_REG +#define CT2_BFA_IOC_FAIL_SYNC CT2_HOST_SEM5_INFO_REG + +#define CPE_Q_NUM(__fn, __q) (((__fn) << 2) + (__q)) +#define RME_Q_NUM(__fn, __q) (((__fn) << 2) + (__q)) + +/* + * And corresponding host interrupt status bit field defines + */ +#define __HFN_INT_CPE_Q0 0x00000001U +#define __HFN_INT_CPE_Q1 0x00000002U +#define __HFN_INT_CPE_Q2 0x00000004U +#define __HFN_INT_CPE_Q3 0x00000008U +#define __HFN_INT_CPE_Q4 0x00000010U +#define __HFN_INT_CPE_Q5 0x00000020U +#define __HFN_INT_CPE_Q6 0x00000040U +#define __HFN_INT_CPE_Q7 0x00000080U +#define __HFN_INT_RME_Q0 0x00000100U +#define __HFN_INT_RME_Q1 0x00000200U +#define __HFN_INT_RME_Q2 0x00000400U +#define __HFN_INT_RME_Q3 0x00000800U +#define __HFN_INT_RME_Q4 0x00001000U +#define __HFN_INT_RME_Q5 0x00002000U +#define __HFN_INT_RME_Q6 0x00004000U +#define __HFN_INT_RME_Q7 0x00008000U +#define __HFN_INT_ERR_EMC 0x00010000U +#define __HFN_INT_ERR_LPU0 0x00020000U +#define __HFN_INT_ERR_LPU1 0x00040000U +#define __HFN_INT_ERR_PSS 0x00080000U +#define __HFN_INT_MBOX_LPU0 0x00100000U +#define __HFN_INT_MBOX_LPU1 0x00200000U +#define __HFN_INT_MBOX1_LPU0 0x00400000U +#define __HFN_INT_MBOX1_LPU1 0x00800000U +#define __HFN_INT_LL_HALT 0x01000000U +#define __HFN_INT_CPE_MASK 0x000000ffU +#define __HFN_INT_RME_MASK 0x0000ff00U +#define __HFN_INT_ERR_MASK \ + (__HFN_INT_ERR_EMC | __HFN_INT_ERR_LPU0 | __HFN_INT_ERR_LPU1 | \ + __HFN_INT_ERR_PSS | __HFN_INT_LL_HALT) +#define __HFN_INT_FN0_MASK \ + (__HFN_INT_CPE_Q0 | __HFN_INT_CPE_Q1 | __HFN_INT_CPE_Q2 | \ + __HFN_INT_CPE_Q3 | __HFN_INT_RME_Q0 | __HFN_INT_RME_Q1 | \ + __HFN_INT_RME_Q2 | __HFN_INT_RME_Q3 | __HFN_INT_MBOX_LPU0) +#define __HFN_INT_FN1_MASK \ + (__HFN_INT_CPE_Q4 | __HFN_INT_CPE_Q5 | __HFN_INT_CPE_Q6 | \ + __HFN_INT_CPE_Q7 | __HFN_INT_RME_Q4 | __HFN_INT_RME_Q5 | \ + __HFN_INT_RME_Q6 | __HFN_INT_RME_Q7 | __HFN_INT_MBOX_LPU1) + +/* + * Host interrupt status defines for catapult-2 + */ +#define __HFN_INT_MBOX_LPU0_CT2 0x00010000U +#define __HFN_INT_MBOX_LPU1_CT2 0x00020000U +#define __HFN_INT_ERR_PSS_CT2 0x00040000U +#define __HFN_INT_ERR_LPU0_CT2 0x00080000U +#define __HFN_INT_ERR_LPU1_CT2 0x00100000U +#define __HFN_INT_CPQ_HALT_CT2 0x00200000U +#define __HFN_INT_ERR_WGN_CT2 0x00400000U +#define __HFN_INT_ERR_LEHRX_CT2 0x00800000U +#define __HFN_INT_ERR_LEHTX_CT2 0x01000000U +#define __HFN_INT_ERR_MASK_CT2 \ + (__HFN_INT_ERR_PSS_CT2 | __HFN_INT_ERR_LPU0_CT2 | \ + __HFN_INT_ERR_LPU1_CT2 | __HFN_INT_CPQ_HALT_CT2 | \ + __HFN_INT_ERR_WGN_CT2 | __HFN_INT_ERR_LEHRX_CT2 | \ + __HFN_INT_ERR_LEHTX_CT2) +#define __HFN_INT_FN0_MASK_CT2 \ + (__HFN_INT_CPE_Q0 | __HFN_INT_CPE_Q1 | __HFN_INT_CPE_Q2 | \ + __HFN_INT_CPE_Q3 | __HFN_INT_RME_Q0 | __HFN_INT_RME_Q1 | \ + __HFN_INT_RME_Q2 | __HFN_INT_RME_Q3 | __HFN_INT_MBOX_LPU0_CT2) +#define __HFN_INT_FN1_MASK_CT2 \ + (__HFN_INT_CPE_Q4 | __HFN_INT_CPE_Q5 | __HFN_INT_CPE_Q6 | \ + __HFN_INT_CPE_Q7 | __HFN_INT_RME_Q4 | __HFN_INT_RME_Q5 | \ + __HFN_INT_RME_Q6 | __HFN_INT_RME_Q7 | __HFN_INT_MBOX_LPU1_CT2) + +/* + * asic memory map. + */ +#define PSS_SMEM_PAGE_START 0x8000 +#define PSS_SMEM_PGNUM(_pg0, _ma) ((_pg0) + ((_ma) >> 15)) +#define PSS_SMEM_PGOFF(_ma) ((_ma) & 0x7fff) + +#endif /* __BFI_REG_H__ */ |