summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--drivers/tty/serial/8250/8250_exar.c5
-rw-r--r--drivers/tty/serial/8250/8250_port.c6
-rw-r--r--drivers/tty/serial/fsl_lpuart.c7
-rw-r--r--drivers/tty/serial/imx.c22
-rw-r--r--drivers/tty/serial/max310x.c9
-rw-r--r--drivers/tty/serial/samsung_tty.c5
-rw-r--r--drivers/tty/serial/serial_core.c12
7 files changed, 44 insertions, 22 deletions
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index dca1abe36..55451ff84 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -714,6 +714,7 @@ static void exar_pci_remove(struct pci_dev *pcidev)
for (i = 0; i < priv->nr; i++)
serial8250_unregister_port(priv->line[i]);
+ /* Ensure that every init quirk is properly torn down */
if (priv->board->exit)
priv->board->exit(pcidev);
}
@@ -728,10 +729,6 @@ static int __maybe_unused exar_suspend(struct device *dev)
if (priv->line[i] >= 0)
serial8250_suspend_port(priv->line[i]);
- /* Ensure that every init quirk is properly torn down */
- if (priv->board->exit)
- priv->board->exit(pcidev);
-
return 0;
}
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 8efe31448..c744feabd 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1377,9 +1377,6 @@ static void autoconfig_irq(struct uart_8250_port *up)
inb_p(ICP);
}
- if (uart_console(port))
- console_lock();
-
/* forget possible initially masked and pending IRQ */
probe_irq_off(probe_irq_on());
save_mcr = serial8250_in_MCR(up);
@@ -1410,9 +1407,6 @@ static void autoconfig_irq(struct uart_8250_port *up)
if (port->flags & UPF_FOURPORT)
outb_p(save_ICP, ICP);
- if (uart_console(port))
- console_unlock();
-
port->irq = (irq > 0) ? irq : 0;
}
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index c5a9b89c4..f94c78263 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -2213,9 +2213,12 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
lpuart32_write(&sport->port, bd, UARTBAUD);
lpuart32_serial_setbrg(sport, baud);
- lpuart32_write(&sport->port, modem, UARTMODIR);
- lpuart32_write(&sport->port, ctrl, UARTCTRL);
+ /* disable CTS before enabling UARTCTRL_TE to avoid pending idle preamble */
+ lpuart32_write(&sport->port, modem & ~UARTMODIR_TXCTSE, UARTMODIR);
/* restore control register */
+ lpuart32_write(&sport->port, ctrl, UARTCTRL);
+ /* re-enable the CTS if needed */
+ lpuart32_write(&sport->port, modem, UARTMODIR);
if ((ctrl & (UARTCTRL_PE | UARTCTRL_M)) == UARTCTRL_PE)
sport->is_cs7 = true;
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index f8962a3d4..573bf7e9b 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -496,8 +496,7 @@ static void imx_uart_stop_tx(struct uart_port *port)
}
}
-/* called with port.lock taken and irqs off */
-static void imx_uart_stop_rx(struct uart_port *port)
+static void imx_uart_stop_rx_with_loopback_ctrl(struct uart_port *port, bool loopback)
{
struct imx_port *sport = (struct imx_port *)port;
u32 ucr1, ucr2, ucr4, uts;
@@ -519,7 +518,7 @@ static void imx_uart_stop_rx(struct uart_port *port)
/* See SER_RS485_ENABLED/UTS_LOOP comment in imx_uart_probe() */
if (port->rs485.flags & SER_RS485_ENABLED &&
port->rs485.flags & SER_RS485_RTS_ON_SEND &&
- sport->have_rtscts && !sport->have_rtsgpio) {
+ sport->have_rtscts && !sport->have_rtsgpio && loopback) {
uts = imx_uart_readl(sport, imx_uart_uts_reg(sport));
uts |= UTS_LOOP;
imx_uart_writel(sport, uts, imx_uart_uts_reg(sport));
@@ -532,6 +531,16 @@ static void imx_uart_stop_rx(struct uart_port *port)
}
/* called with port.lock taken and irqs off */
+static void imx_uart_stop_rx(struct uart_port *port)
+{
+ /*
+ * Stop RX and enable loopback in order to make sure RS485 bus
+ * is not blocked. Se comment in imx_uart_probe().
+ */
+ imx_uart_stop_rx_with_loopback_ctrl(port, true);
+}
+
+/* called with port.lock taken and irqs off */
static void imx_uart_enable_ms(struct uart_port *port)
{
struct imx_port *sport = (struct imx_port *)port;
@@ -719,8 +728,13 @@ static void imx_uart_start_tx(struct uart_port *port)
imx_uart_rts_inactive(sport, &ucr2);
imx_uart_writel(sport, ucr2, UCR2);
+ /*
+ * Since we are about to transmit we can not stop RX
+ * with loopback enabled because that will make our
+ * transmitted data being just looped to RX.
+ */
if (!(port->rs485.flags & SER_RS485_RX_DURING_TX))
- imx_uart_stop_rx(port);
+ imx_uart_stop_rx_with_loopback_ctrl(port, false);
sport->tx_state = WAIT_AFTER_RTS;
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 163a89f84..d409ef388 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -1459,7 +1459,7 @@ static int max310x_probe(struct device *dev, const struct max310x_devtype *devty
if (!ret)
return 0;
- dev_err(dev, "Unable to reguest IRQ %i\n", irq);
+ dev_err(dev, "Unable to request IRQ %i\n", irq);
out_uart:
for (i = 0; i < devtype->nr; i++) {
@@ -1633,13 +1633,16 @@ static unsigned short max310x_i2c_slave_addr(unsigned short addr,
static int max310x_i2c_probe(struct i2c_client *client)
{
- const struct max310x_devtype *devtype =
- device_get_match_data(&client->dev);
+ const struct max310x_devtype *devtype;
struct i2c_client *port_client;
struct regmap *regmaps[4];
unsigned int i;
u8 port_addr;
+ devtype = device_get_match_data(&client->dev);
+ if (!devtype)
+ return dev_err_probe(&client->dev, -ENODEV, "Failed to match device\n");
+
if (client->addr < devtype->slave_addr.min ||
client->addr > devtype->slave_addr.max)
return dev_err_probe(&client->dev, -EINVAL,
diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index aa2c51b84..589daed19 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -996,11 +996,10 @@ static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port)
if ((ufstat & info->tx_fifomask) != 0 ||
(ufstat & info->tx_fifofull))
return 0;
-
- return 1;
+ return TIOCSER_TEMT;
}
- return s3c24xx_serial_txempty_nofifo(port);
+ return s3c24xx_serial_txempty_nofifo(port) ? TIOCSER_TEMT : 0;
}
/* no modem control lines */
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index f0ed30d0a..fe3f1d655 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2561,7 +2561,12 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state,
port->type = PORT_UNKNOWN;
flags |= UART_CONFIG_TYPE;
}
+ /* Synchronize with possible boot console. */
+ if (uart_console(port))
+ console_lock();
port->ops->config_port(port, flags);
+ if (uart_console(port))
+ console_unlock();
}
if (port->type != PORT_UNKNOWN) {
@@ -2569,6 +2574,10 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state,
uart_report_port(drv, port);
+ /* Synchronize with possible boot console. */
+ if (uart_console(port))
+ console_lock();
+
/* Power up port for set_mctrl() */
uart_change_pm(state, UART_PM_STATE_ON);
@@ -2585,6 +2594,9 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state,
uart_rs485_config(port);
+ if (uart_console(port))
+ console_unlock();
+
/*
* If this driver supports console, and it hasn't been
* successfully registered yet, try to re-register it.
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 12:23:11 +0000