diff options
Diffstat (limited to 'drivers/usb/Kconfig')
| -rw-r--r-- | drivers/usb/Kconfig | 177 |
1 files changed, 177 insertions, 0 deletions
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig new file mode 100644 index 000000000..578a439e7 --- /dev/null +++ b/drivers/usb/Kconfig @@ -0,0 +1,177 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# USB device configuration +# + +config USB_OHCI_BIG_ENDIAN_DESC + bool + +config USB_OHCI_BIG_ENDIAN_MMIO + bool + +config USB_OHCI_LITTLE_ENDIAN + bool + default n if PPC_MPC52xx + default y + +config USB_EHCI_BIG_ENDIAN_MMIO + bool + +config USB_EHCI_BIG_ENDIAN_DESC + bool + +config USB_UHCI_BIG_ENDIAN_MMIO + bool + +config USB_UHCI_BIG_ENDIAN_DESC + bool + +menuconfig USB_SUPPORT + bool "USB support" + depends on HAS_IOMEM + default y + help + This option adds core support for Universal Serial Bus (USB). + You will also need drivers from the following menu to make use of it. + +if USB_SUPPORT + +source "drivers/usb/common/Kconfig" + +config USB_ARCH_HAS_HCD + def_bool y + +config USB + tristate "Support for Host-side USB" + depends on USB_ARCH_HAS_HCD + select GENERIC_ALLOCATOR + select USB_COMMON + select NLS # for UTF-8 strings + help + Universal Serial Bus (USB) is a specification for a serial bus + subsystem which offers higher speeds and more features than the + traditional PC serial port. The bus supplies power to peripherals + and allows for hot swapping. Up to 127 USB peripherals can be + connected to a single USB host in a tree structure. + + The USB host is the root of the tree, the peripherals are the + leaves and the inner nodes are special USB devices called hubs. + Most PCs now have USB host ports, used to connect peripherals + such as scanners, keyboards, mice, modems, cameras, disks, + flash memory, network links, and printers to the PC. + + Say Y here if your computer has a host-side USB port and you want + to use USB devices. You then need to say Y to at least one of the + Host Controller Driver (HCD) options below. Choose a USB 1.1 + controller, such as "UHCI HCD support" or "OHCI HCD support", + and "EHCI HCD (USB 2.0) support" except for older systems that + do not have USB 2.0 support. It doesn't normally hurt to select + them all if you are not certain. + + If your system has a device-side USB port, used in the peripheral + side of the USB protocol, see the "USB Gadget" framework instead. + + After choosing your HCD, then select drivers for the USB peripherals + you'll be using. You may want to check out the information provided + in <file:Documentation/usb/> and especially the links given in + <file:Documentation/usb/usb-help.rst>. + + To compile this driver as a module, choose M here: the + module will be called usbcore. + +config USB_PCI + bool "PCI based USB host interface" + depends on PCI + default y + help + Many embedded system SOCs (e.g. freescale T2080) have both + PCI and USB modules with the USB module directly controlled by + registers and having no relationship to the PCI module. + + If you have such a device you may say N here and PCI related code + will not be built in the USB driver. + +if USB + +source "drivers/usb/core/Kconfig" + +source "drivers/usb/mon/Kconfig" + +source "drivers/usb/host/Kconfig" + +source "drivers/usb/renesas_usbhs/Kconfig" + +source "drivers/usb/class/Kconfig" + +source "drivers/usb/storage/Kconfig" + +source "drivers/usb/image/Kconfig" + +source "drivers/usb/usbip/Kconfig" + +endif + +source "drivers/usb/cdns3/Kconfig" + +source "drivers/usb/mtu3/Kconfig" + +source "drivers/usb/musb/Kconfig" + +source "drivers/usb/dwc3/Kconfig" + +source "drivers/usb/dwc2/Kconfig" + +source "drivers/usb/chipidea/Kconfig" + +source "drivers/usb/isp1760/Kconfig" + +comment "USB port drivers" + +if USB + +config USB_USS720 + tristate "USS720 parport driver" + depends on PARPORT + select PARPORT_NOT_PC + help + This driver is for USB parallel port adapters that use the Lucent + Technologies USS-720 chip. These cables are plugged into your USB + port and provide USB compatibility to peripherals designed with + parallel port interfaces. + + The chip has two modes: automatic mode and manual mode. In automatic + mode, it looks to the computer like a standard USB printer. Only + printers may be connected to the USS-720 in this mode. The generic + USB printer driver ("USB Printer support", above) may be used in + that mode, and you can say N here if you want to use the chip only + in this mode. + + Manual mode is not limited to printers, any parallel port + device should work. This driver utilizes manual mode. + Note however that some operations are three orders of magnitude + slower than on a PCI/ISA Parallel Port, so timing critical + applications might not work. + + Say Y here if you own an USS-720 USB->Parport cable and intend to + connect anything other than a printer to it. + + To compile this driver as a module, choose M here: the + module will be called uss720. + +source "drivers/usb/serial/Kconfig" + +source "drivers/usb/misc/Kconfig" + +source "drivers/usb/atm/Kconfig" + +endif # USB + +source "drivers/usb/phy/Kconfig" + +source "drivers/usb/gadget/Kconfig" + +source "drivers/usb/typec/Kconfig" + +source "drivers/usb/roles/Kconfig" + +endif # USB_SUPPORT |