diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/usb/musb/musb_virthub.c | 440 |
1 files changed, 440 insertions, 0 deletions
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c new file mode 100644 index 000000000..cafc69536 --- /dev/null +++ b/drivers/usb/musb/musb_virthub.c @@ -0,0 +1,440 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * MUSB OTG driver virtual root hub support + * + * Copyright 2005 Mentor Graphics Corporation + * Copyright (C) 2005-2006 by Texas Instruments + * Copyright (C) 2006-2007 Nokia Corporation + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/errno.h> +#include <linux/time.h> +#include <linux/timer.h> + +#include <asm/unaligned.h> + +#include "musb_core.h" + +void musb_host_finish_resume(struct work_struct *work) +{ + struct musb *musb; + unsigned long flags; + u8 power; + + musb = container_of(work, struct musb, finish_resume_work.work); + + spin_lock_irqsave(&musb->lock, flags); + + power = musb_readb(musb->mregs, MUSB_POWER); + power &= ~MUSB_POWER_RESUME; + musb_dbg(musb, "root port resume stopped, power %02x", power); + musb_writeb(musb->mregs, MUSB_POWER, power); + + /* + * ISSUE: DaVinci (RTL 1.300) disconnects after + * resume of high speed peripherals (but not full + * speed ones). + */ + musb->is_active = 1; + musb->port1_status &= ~(USB_PORT_STAT_SUSPEND | MUSB_PORT_STAT_RESUME); + musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16; + usb_hcd_poll_rh_status(musb->hcd); + /* NOTE: it might really be A_WAIT_BCON ... */ + musb->xceiv->otg->state = OTG_STATE_A_HOST; + + spin_unlock_irqrestore(&musb->lock, flags); +} + +int musb_port_suspend(struct musb *musb, bool do_suspend) +{ + struct usb_otg *otg = musb->xceiv->otg; + u8 power; + void __iomem *mbase = musb->mregs; + + if (!is_host_active(musb)) + return 0; + + /* NOTE: this doesn't necessarily put PHY into low power mode, + * turning off its clock; that's a function of PHY integration and + * MUSB_POWER_ENSUSPEND. PHY may need a clock (sigh) to detect + * SE0 changing to connect (J) or wakeup (K) states. + */ + power = musb_readb(mbase, MUSB_POWER); + if (do_suspend) { + int retries = 10000; + + if (power & MUSB_POWER_RESUME) + return -EBUSY; + + if (!(power & MUSB_POWER_SUSPENDM)) { + power |= MUSB_POWER_SUSPENDM; + musb_writeb(mbase, MUSB_POWER, power); + + /* Needed for OPT A tests */ + power = musb_readb(mbase, MUSB_POWER); + while (power & MUSB_POWER_SUSPENDM) { + power = musb_readb(mbase, MUSB_POWER); + if (retries-- < 1) + break; + } + } + + musb_dbg(musb, "Root port suspended, power %02x", power); + + musb->port1_status |= USB_PORT_STAT_SUSPEND; + switch (musb->xceiv->otg->state) { + case OTG_STATE_A_HOST: + musb->xceiv->otg->state = OTG_STATE_A_SUSPEND; + musb->is_active = otg->host->b_hnp_enable; + if (musb->is_active) + mod_timer(&musb->otg_timer, jiffies + + msecs_to_jiffies( + OTG_TIME_A_AIDL_BDIS)); + musb_platform_try_idle(musb, 0); + break; + case OTG_STATE_B_HOST: + musb->xceiv->otg->state = OTG_STATE_B_WAIT_ACON; + musb->is_active = otg->host->b_hnp_enable; + musb_platform_try_idle(musb, 0); + break; + default: + musb_dbg(musb, "bogus rh suspend? %s", + usb_otg_state_string(musb->xceiv->otg->state)); + } + } else if (power & MUSB_POWER_SUSPENDM) { + power &= ~MUSB_POWER_SUSPENDM; + power |= MUSB_POWER_RESUME; + musb_writeb(mbase, MUSB_POWER, power); + + musb_dbg(musb, "Root port resuming, power %02x", power); + + musb->port1_status |= MUSB_PORT_STAT_RESUME; + schedule_delayed_work(&musb->finish_resume_work, + msecs_to_jiffies(USB_RESUME_TIMEOUT)); + } + return 0; +} + +void musb_port_reset(struct musb *musb, bool do_reset) +{ + u8 power; + void __iomem *mbase = musb->mregs; + + if (musb->xceiv->otg->state == OTG_STATE_B_IDLE) { + musb_dbg(musb, "HNP: Returning from HNP; no hub reset from b_idle"); + musb->port1_status &= ~USB_PORT_STAT_RESET; + return; + } + + if (!is_host_active(musb)) + return; + + /* NOTE: caller guarantees it will turn off the reset when + * the appropriate amount of time has passed + */ + power = musb_readb(mbase, MUSB_POWER); + if (do_reset) { + /* + * If RESUME is set, we must make sure it stays minimum 20 ms. + * Then we must clear RESUME and wait a bit to let musb start + * generating SOFs. If we don't do this, OPT HS A 6.8 tests + * fail with "Error! Did not receive an SOF before suspend + * detected". + */ + if (power & MUSB_POWER_RESUME) { + long remain = (unsigned long) musb->rh_timer - jiffies; + + if (musb->rh_timer > 0 && remain > 0) { + /* take into account the minimum delay after resume */ + schedule_delayed_work( + &musb->deassert_reset_work, remain); + return; + } + + musb_writeb(mbase, MUSB_POWER, + power & ~MUSB_POWER_RESUME); + + /* Give the core 1 ms to clear MUSB_POWER_RESUME */ + schedule_delayed_work(&musb->deassert_reset_work, + msecs_to_jiffies(1)); + return; + } + + power &= 0xf0; + musb_writeb(mbase, MUSB_POWER, + power | MUSB_POWER_RESET); + + musb->port1_status |= USB_PORT_STAT_RESET; + musb->port1_status &= ~USB_PORT_STAT_ENABLE; + schedule_delayed_work(&musb->deassert_reset_work, + msecs_to_jiffies(50)); + } else { + musb_dbg(musb, "root port reset stopped"); + musb_platform_pre_root_reset_end(musb); + musb_writeb(mbase, MUSB_POWER, + power & ~MUSB_POWER_RESET); + musb_platform_post_root_reset_end(musb); + + power = musb_readb(mbase, MUSB_POWER); + if (power & MUSB_POWER_HSMODE) { + musb_dbg(musb, "high-speed device connected"); + musb->port1_status |= USB_PORT_STAT_HIGH_SPEED; + } + + musb->port1_status &= ~USB_PORT_STAT_RESET; + musb->port1_status |= USB_PORT_STAT_ENABLE + | (USB_PORT_STAT_C_RESET << 16) + | (USB_PORT_STAT_C_ENABLE << 16); + usb_hcd_poll_rh_status(musb->hcd); + + musb->vbuserr_retry = VBUSERR_RETRY_COUNT; + } +} + +void musb_root_disconnect(struct musb *musb) +{ + struct usb_otg *otg = musb->xceiv->otg; + + musb->port1_status = USB_PORT_STAT_POWER + | (USB_PORT_STAT_C_CONNECTION << 16); + + usb_hcd_poll_rh_status(musb->hcd); + musb->is_active = 0; + + switch (musb->xceiv->otg->state) { + case OTG_STATE_A_SUSPEND: + if (otg->host->b_hnp_enable) { + musb->xceiv->otg->state = OTG_STATE_A_PERIPHERAL; + musb->g.is_a_peripheral = 1; + break; + } + fallthrough; + case OTG_STATE_A_HOST: + musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON; + musb->is_active = 0; + break; + case OTG_STATE_A_WAIT_VFALL: + musb->xceiv->otg->state = OTG_STATE_B_IDLE; + break; + default: + musb_dbg(musb, "host disconnect (%s)", + usb_otg_state_string(musb->xceiv->otg->state)); + } +} +EXPORT_SYMBOL_GPL(musb_root_disconnect); + + +/*---------------------------------------------------------------------*/ + +/* Caller may or may not hold musb->lock */ +int musb_hub_status_data(struct usb_hcd *hcd, char *buf) +{ + struct musb *musb = hcd_to_musb(hcd); + int retval = 0; + + /* called in_irq() via usb_hcd_poll_rh_status() */ + if (musb->port1_status & 0xffff0000) { + *buf = 0x02; + retval = 1; + } + return retval; +} + +static int musb_has_gadget(struct musb *musb) +{ + /* + * In host-only mode we start a connection right away. In OTG mode + * we have to wait until we loaded a gadget. We don't really need a + * gadget if we operate as a host but we should not start a session + * as a device without a gadget or else we explode. + */ +#ifdef CONFIG_USB_MUSB_HOST + return 1; +#else + return musb->port_mode == MUSB_HOST; +#endif +} + +int musb_hub_control( + struct usb_hcd *hcd, + u16 typeReq, + u16 wValue, + u16 wIndex, + char *buf, + u16 wLength) +{ + struct musb *musb = hcd_to_musb(hcd); + u32 temp; + int retval = 0; + unsigned long flags; + bool start_musb = false; + + spin_lock_irqsave(&musb->lock, flags); + + if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) { + spin_unlock_irqrestore(&musb->lock, flags); + return -ESHUTDOWN; + } + + /* hub features: always zero, setting is a NOP + * port features: reported, sometimes updated when host is active + * no indicators + */ + switch (typeReq) { + case ClearHubFeature: + case SetHubFeature: + switch (wValue) { + case C_HUB_OVER_CURRENT: + case C_HUB_LOCAL_POWER: + break; + default: + goto error; + } + break; + case ClearPortFeature: + if ((wIndex & 0xff) != 1) + goto error; + + switch (wValue) { + case USB_PORT_FEAT_ENABLE: + break; + case USB_PORT_FEAT_SUSPEND: + musb_port_suspend(musb, false); + break; + case USB_PORT_FEAT_POWER: + if (!hcd->self.is_b_host) + musb_platform_set_vbus(musb, 0); + break; + case USB_PORT_FEAT_C_CONNECTION: + case USB_PORT_FEAT_C_ENABLE: + case USB_PORT_FEAT_C_OVER_CURRENT: + case USB_PORT_FEAT_C_RESET: + case USB_PORT_FEAT_C_SUSPEND: + break; + default: + goto error; + } + musb_dbg(musb, "clear feature %d", wValue); + musb->port1_status &= ~(1 << wValue); + break; + case GetHubDescriptor: + { + struct usb_hub_descriptor *desc = (void *)buf; + + desc->bDescLength = 9; + desc->bDescriptorType = USB_DT_HUB; + desc->bNbrPorts = 1; + desc->wHubCharacteristics = cpu_to_le16( + HUB_CHAR_INDV_PORT_LPSM /* per-port power switching */ + | HUB_CHAR_NO_OCPM /* no overcurrent reporting */ + ); + desc->bPwrOn2PwrGood = 5; /* msec/2 */ + desc->bHubContrCurrent = 0; + + /* workaround bogus struct definition */ + desc->u.hs.DeviceRemovable[0] = 0x02; /* port 1 */ + desc->u.hs.DeviceRemovable[1] = 0xff; + } + break; + case GetHubStatus: + temp = 0; + *(__le32 *) buf = cpu_to_le32(temp); + break; + case GetPortStatus: + if (wIndex != 1) + goto error; + + put_unaligned(cpu_to_le32(musb->port1_status + & ~MUSB_PORT_STAT_RESUME), + (__le32 *) buf); + + /* port change status is more interesting */ + musb_dbg(musb, "port status %08x", musb->port1_status); + break; + case SetPortFeature: + if ((wIndex & 0xff) != 1) + goto error; + + switch (wValue) { + case USB_PORT_FEAT_POWER: + /* NOTE: this controller has a strange state machine + * that involves "requesting sessions" according to + * magic side effects from incompletely-described + * rules about startup... + * + * This call is what really starts the host mode; be + * very careful about side effects if you reorder any + * initialization logic, e.g. for OTG, or change any + * logic relating to VBUS power-up. + */ + if (!hcd->self.is_b_host && musb_has_gadget(musb)) + start_musb = true; + break; + case USB_PORT_FEAT_RESET: + musb_port_reset(musb, true); + break; + case USB_PORT_FEAT_SUSPEND: + musb_port_suspend(musb, true); + break; + case USB_PORT_FEAT_TEST: + if (unlikely(is_host_active(musb))) + goto error; + + wIndex >>= 8; + switch (wIndex) { + case USB_TEST_J: + pr_debug("USB_TEST_J\n"); + temp = MUSB_TEST_J; + break; + case USB_TEST_K: + pr_debug("USB_TEST_K\n"); + temp = MUSB_TEST_K; + break; + case USB_TEST_SE0_NAK: + pr_debug("USB_TEST_SE0_NAK\n"); + temp = MUSB_TEST_SE0_NAK; + break; + case USB_TEST_PACKET: + pr_debug("USB_TEST_PACKET\n"); + temp = MUSB_TEST_PACKET; + musb_load_testpacket(musb); + break; + case USB_TEST_FORCE_ENABLE: + pr_debug("USB_TEST_FORCE_ENABLE\n"); + temp = MUSB_TEST_FORCE_HOST + | MUSB_TEST_FORCE_HS; + + musb_writeb(musb->mregs, MUSB_DEVCTL, + MUSB_DEVCTL_SESSION); + break; + case 6: + pr_debug("TEST_FIFO_ACCESS\n"); + temp = MUSB_TEST_FIFO_ACCESS; + break; + default: + goto error; + } + musb_writeb(musb->mregs, MUSB_TESTMODE, temp); + break; + default: + goto error; + } + musb_dbg(musb, "set feature %d", wValue); + musb->port1_status |= 1 << wValue; + break; + + default: +error: + /* "protocol stall" on error */ + retval = -EPIPE; + } + spin_unlock_irqrestore(&musb->lock, flags); + + if (start_musb) + musb_start(musb); + + return retval; +} |