summaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial/keyspan.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial/keyspan.c')
-rw-r--r--drivers/usb/serial/keyspan.c3105
1 files changed, 3105 insertions, 0 deletions
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
new file mode 100644
index 000000000..2966e0c49
--- /dev/null
+++ b/drivers/usb/serial/keyspan.c
@@ -0,0 +1,3105 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ Keyspan USB to Serial Converter driver
+
+ (C) Copyright (C) 2000-2001 Hugh Blemings <hugh@blemings.org>
+ (C) Copyright (C) 2002 Greg Kroah-Hartman <greg@kroah.com>
+
+ See http://blemings.org/hugh/keyspan.html for more information.
+
+ Code in this driver inspired by and in a number of places taken
+ from Brian Warner's original Keyspan-PDA driver.
+
+ This driver has been put together with the support of Innosys, Inc.
+ and Keyspan, Inc the manufacturers of the Keyspan USB-serial products.
+ Thanks Guys :)
+
+ Thanks to Paulus for miscellaneous tidy ups, some largish chunks
+ of much nicer and/or completely new code and (perhaps most uniquely)
+ having the patience to sit down and explain why and where he'd changed
+ stuff.
+
+ Tip 'o the hat to IBM (and previously Linuxcare :) for supporting
+ staff in their work on open source projects.
+*/
+
+
+#include <linux/kernel.h>
+#include <linux/jiffies.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/usb/ezusb.h>
+
+#define DRIVER_AUTHOR "Hugh Blemings <hugh@misc.nu"
+#define DRIVER_DESC "Keyspan USB to Serial Converter Driver"
+
+static void keyspan_send_setup(struct usb_serial_port *port, int reset_port);
+
+static int keyspan_usa19_calc_baud(struct usb_serial_port *port,
+ u32 baud_rate, u32 baudclk,
+ u8 *rate_hi, u8 *rate_low,
+ u8 *prescaler, int portnum);
+static int keyspan_usa19w_calc_baud(struct usb_serial_port *port,
+ u32 baud_rate, u32 baudclk,
+ u8 *rate_hi, u8 *rate_low,
+ u8 *prescaler, int portnum);
+static int keyspan_usa28_calc_baud(struct usb_serial_port *port,
+ u32 baud_rate, u32 baudclk,
+ u8 *rate_hi, u8 *rate_low,
+ u8 *prescaler, int portnum);
+static int keyspan_usa19hs_calc_baud(struct usb_serial_port *port,
+ u32 baud_rate, u32 baudclk,
+ u8 *rate_hi, u8 *rate_low,
+ u8 *prescaler, int portnum);
+
+static int keyspan_usa28_send_setup(struct usb_serial *serial,
+ struct usb_serial_port *port,
+ int reset_port);
+static int keyspan_usa26_send_setup(struct usb_serial *serial,
+ struct usb_serial_port *port,
+ int reset_port);
+static int keyspan_usa49_send_setup(struct usb_serial *serial,
+ struct usb_serial_port *port,
+ int reset_port);
+static int keyspan_usa90_send_setup(struct usb_serial *serial,
+ struct usb_serial_port *port,
+ int reset_port);
+static int keyspan_usa67_send_setup(struct usb_serial *serial,
+ struct usb_serial_port *port,
+ int reset_port);
+
+/* Values used for baud rate calculation - device specific */
+#define KEYSPAN_INVALID_BAUD_RATE (-1)
+#define KEYSPAN_BAUD_RATE_OK (0)
+#define KEYSPAN_USA18X_BAUDCLK (12000000L) /* a guess */
+#define KEYSPAN_USA19_BAUDCLK (12000000L)
+#define KEYSPAN_USA19W_BAUDCLK (24000000L)
+#define KEYSPAN_USA19HS_BAUDCLK (14769231L)
+#define KEYSPAN_USA28_BAUDCLK (1843200L)
+#define KEYSPAN_USA28X_BAUDCLK (12000000L)
+#define KEYSPAN_USA49W_BAUDCLK (48000000L)
+
+/* Some constants used to characterise each device. */
+#define KEYSPAN_MAX_NUM_PORTS (4)
+#define KEYSPAN_MAX_FLIPS (2)
+
+/*
+ * Device info for the Keyspan serial converter, used by the overall
+ * usb-serial probe function.
+ */
+#define KEYSPAN_VENDOR_ID (0x06cd)
+
+/* Product IDs for the products supported, pre-renumeration */
+#define keyspan_usa18x_pre_product_id 0x0105
+#define keyspan_usa19_pre_product_id 0x0103
+#define keyspan_usa19qi_pre_product_id 0x010b
+#define keyspan_mpr_pre_product_id 0x011b
+#define keyspan_usa19qw_pre_product_id 0x0118
+#define keyspan_usa19w_pre_product_id 0x0106
+#define keyspan_usa28_pre_product_id 0x0101
+#define keyspan_usa28x_pre_product_id 0x0102
+#define keyspan_usa28xa_pre_product_id 0x0114
+#define keyspan_usa28xb_pre_product_id 0x0113
+#define keyspan_usa49w_pre_product_id 0x0109
+#define keyspan_usa49wlc_pre_product_id 0x011a
+
+/*
+ * Product IDs post-renumeration. Note that the 28x and 28xb have the same
+ * id's post-renumeration but behave identically so it's not an issue. As
+ * such, the 28xb is not listed in any of the device tables.
+ */
+#define keyspan_usa18x_product_id 0x0112
+#define keyspan_usa19_product_id 0x0107
+#define keyspan_usa19qi_product_id 0x010c
+#define keyspan_usa19hs_product_id 0x0121
+#define keyspan_mpr_product_id 0x011c
+#define keyspan_usa19qw_product_id 0x0119
+#define keyspan_usa19w_product_id 0x0108
+#define keyspan_usa28_product_id 0x010f
+#define keyspan_usa28x_product_id 0x0110
+#define keyspan_usa28xa_product_id 0x0115
+#define keyspan_usa28xb_product_id 0x0110
+#define keyspan_usa28xg_product_id 0x0135
+#define keyspan_usa49w_product_id 0x010a
+#define keyspan_usa49wlc_product_id 0x012a
+#define keyspan_usa49wg_product_id 0x0131
+
+struct keyspan_device_details {
+ /* product ID value */
+ int product_id;
+
+ enum {msg_usa26, msg_usa28, msg_usa49, msg_usa90, msg_usa67} msg_format;
+
+ /* Number of physical ports */
+ int num_ports;
+
+ /* 1 if endpoint flipping used on input, 0 if not */
+ int indat_endp_flip;
+
+ /* 1 if endpoint flipping used on output, 0 if not */
+ int outdat_endp_flip;
+
+ /*
+ * Table mapping input data endpoint IDs to physical port
+ * number and flip if used
+ */
+ int indat_endpoints[KEYSPAN_MAX_NUM_PORTS];
+
+ /* Same for output endpoints */
+ int outdat_endpoints[KEYSPAN_MAX_NUM_PORTS];
+
+ /* Input acknowledge endpoints */
+ int inack_endpoints[KEYSPAN_MAX_NUM_PORTS];
+
+ /* Output control endpoints */
+ int outcont_endpoints[KEYSPAN_MAX_NUM_PORTS];
+
+ /* Endpoint used for input status */
+ int instat_endpoint;
+
+ /* Endpoint used for input data 49WG only */
+ int indat_endpoint;
+
+ /* Endpoint used for global control functions */
+ int glocont_endpoint;
+
+ int (*calculate_baud_rate)(struct usb_serial_port *port,
+ u32 baud_rate, u32 baudclk,
+ u8 *rate_hi, u8 *rate_low, u8 *prescaler,
+ int portnum);
+ u32 baudclk;
+};
+
+/*
+ * Now for each device type we setup the device detail structure with the
+ * appropriate information (provided in Keyspan's documentation)
+ */
+
+static const struct keyspan_device_details usa18x_device_details = {
+ .product_id = keyspan_usa18x_product_id,
+ .msg_format = msg_usa26,
+ .num_ports = 1,
+ .indat_endp_flip = 0,
+ .outdat_endp_flip = 1,
+ .indat_endpoints = {0x81},
+ .outdat_endpoints = {0x01},
+ .inack_endpoints = {0x85},
+ .outcont_endpoints = {0x05},
+ .instat_endpoint = 0x87,
+ .indat_endpoint = -1,
+ .glocont_endpoint = 0x07,
+ .calculate_baud_rate = keyspan_usa19w_calc_baud,
+ .baudclk = KEYSPAN_USA18X_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa19_device_details = {
+ .product_id = keyspan_usa19_product_id,
+ .msg_format = msg_usa28,
+ .num_ports = 1,
+ .indat_endp_flip = 1,
+ .outdat_endp_flip = 1,
+ .indat_endpoints = {0x81},
+ .outdat_endpoints = {0x01},
+ .inack_endpoints = {0x83},
+ .outcont_endpoints = {0x03},
+ .instat_endpoint = 0x84,
+ .indat_endpoint = -1,
+ .glocont_endpoint = -1,
+ .calculate_baud_rate = keyspan_usa19_calc_baud,
+ .baudclk = KEYSPAN_USA19_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa19qi_device_details = {
+ .product_id = keyspan_usa19qi_product_id,
+ .msg_format = msg_usa28,
+ .num_ports = 1,
+ .indat_endp_flip = 1,
+ .outdat_endp_flip = 1,
+ .indat_endpoints = {0x81},
+ .outdat_endpoints = {0x01},
+ .inack_endpoints = {0x83},
+ .outcont_endpoints = {0x03},
+ .instat_endpoint = 0x84,
+ .indat_endpoint = -1,
+ .glocont_endpoint = -1,
+ .calculate_baud_rate = keyspan_usa28_calc_baud,
+ .baudclk = KEYSPAN_USA19_BAUDCLK,
+};
+
+static const struct keyspan_device_details mpr_device_details = {
+ .product_id = keyspan_mpr_product_id,
+ .msg_format = msg_usa28,
+ .num_ports = 1,
+ .indat_endp_flip = 1,
+ .outdat_endp_flip = 1,
+ .indat_endpoints = {0x81},
+ .outdat_endpoints = {0x01},
+ .inack_endpoints = {0x83},
+ .outcont_endpoints = {0x03},
+ .instat_endpoint = 0x84,
+ .indat_endpoint = -1,
+ .glocont_endpoint = -1,
+ .calculate_baud_rate = keyspan_usa28_calc_baud,
+ .baudclk = KEYSPAN_USA19_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa19qw_device_details = {
+ .product_id = keyspan_usa19qw_product_id,
+ .msg_format = msg_usa26,
+ .num_ports = 1,
+ .indat_endp_flip = 0,
+ .outdat_endp_flip = 1,
+ .indat_endpoints = {0x81},
+ .outdat_endpoints = {0x01},
+ .inack_endpoints = {0x85},
+ .outcont_endpoints = {0x05},
+ .instat_endpoint = 0x87,
+ .indat_endpoint = -1,
+ .glocont_endpoint = 0x07,
+ .calculate_baud_rate = keyspan_usa19w_calc_baud,
+ .baudclk = KEYSPAN_USA19W_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa19w_device_details = {
+ .product_id = keyspan_usa19w_product_id,
+ .msg_format = msg_usa26,
+ .num_ports = 1,
+ .indat_endp_flip = 0,
+ .outdat_endp_flip = 1,
+ .indat_endpoints = {0x81},
+ .outdat_endpoints = {0x01},
+ .inack_endpoints = {0x85},
+ .outcont_endpoints = {0x05},
+ .instat_endpoint = 0x87,
+ .indat_endpoint = -1,
+ .glocont_endpoint = 0x07,
+ .calculate_baud_rate = keyspan_usa19w_calc_baud,
+ .baudclk = KEYSPAN_USA19W_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa19hs_device_details = {
+ .product_id = keyspan_usa19hs_product_id,
+ .msg_format = msg_usa90,
+ .num_ports = 1,
+ .indat_endp_flip = 0,
+ .outdat_endp_flip = 0,
+ .indat_endpoints = {0x81},
+ .outdat_endpoints = {0x01},
+ .inack_endpoints = {-1},
+ .outcont_endpoints = {0x02},
+ .instat_endpoint = 0x82,
+ .indat_endpoint = -1,
+ .glocont_endpoint = -1,
+ .calculate_baud_rate = keyspan_usa19hs_calc_baud,
+ .baudclk = KEYSPAN_USA19HS_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa28_device_details = {
+ .product_id = keyspan_usa28_product_id,
+ .msg_format = msg_usa28,
+ .num_ports = 2,
+ .indat_endp_flip = 1,
+ .outdat_endp_flip = 1,
+ .indat_endpoints = {0x81, 0x83},
+ .outdat_endpoints = {0x01, 0x03},
+ .inack_endpoints = {0x85, 0x86},
+ .outcont_endpoints = {0x05, 0x06},
+ .instat_endpoint = 0x87,
+ .indat_endpoint = -1,
+ .glocont_endpoint = 0x07,
+ .calculate_baud_rate = keyspan_usa28_calc_baud,
+ .baudclk = KEYSPAN_USA28_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa28x_device_details = {
+ .product_id = keyspan_usa28x_product_id,
+ .msg_format = msg_usa26,
+ .num_ports = 2,
+ .indat_endp_flip = 0,
+ .outdat_endp_flip = 1,
+ .indat_endpoints = {0x81, 0x83},
+ .outdat_endpoints = {0x01, 0x03},
+ .inack_endpoints = {0x85, 0x86},
+ .outcont_endpoints = {0x05, 0x06},
+ .instat_endpoint = 0x87,
+ .indat_endpoint = -1,
+ .glocont_endpoint = 0x07,
+ .calculate_baud_rate = keyspan_usa19w_calc_baud,
+ .baudclk = KEYSPAN_USA28X_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa28xa_device_details = {
+ .product_id = keyspan_usa28xa_product_id,
+ .msg_format = msg_usa26,
+ .num_ports = 2,
+ .indat_endp_flip = 0,
+ .outdat_endp_flip = 1,
+ .indat_endpoints = {0x81, 0x83},
+ .outdat_endpoints = {0x01, 0x03},
+ .inack_endpoints = {0x85, 0x86},
+ .outcont_endpoints = {0x05, 0x06},
+ .instat_endpoint = 0x87,
+ .indat_endpoint = -1,
+ .glocont_endpoint = 0x07,
+ .calculate_baud_rate = keyspan_usa19w_calc_baud,
+ .baudclk = KEYSPAN_USA28X_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa28xg_device_details = {
+ .product_id = keyspan_usa28xg_product_id,
+ .msg_format = msg_usa67,
+ .num_ports = 2,
+ .indat_endp_flip = 0,
+ .outdat_endp_flip = 0,
+ .indat_endpoints = {0x84, 0x88},
+ .outdat_endpoints = {0x02, 0x06},
+ .inack_endpoints = {-1, -1},
+ .outcont_endpoints = {-1, -1},
+ .instat_endpoint = 0x81,
+ .indat_endpoint = -1,
+ .glocont_endpoint = 0x01,
+ .calculate_baud_rate = keyspan_usa19w_calc_baud,
+ .baudclk = KEYSPAN_USA28X_BAUDCLK,
+};
+/*
+ * We don't need a separate entry for the usa28xb as it appears as a 28x
+ * anyway.
+ */
+
+static const struct keyspan_device_details usa49w_device_details = {
+ .product_id = keyspan_usa49w_product_id,
+ .msg_format = msg_usa49,
+ .num_ports = 4,
+ .indat_endp_flip = 0,
+ .outdat_endp_flip = 0,
+ .indat_endpoints = {0x81, 0x82, 0x83, 0x84},
+ .outdat_endpoints = {0x01, 0x02, 0x03, 0x04},
+ .inack_endpoints = {-1, -1, -1, -1},
+ .outcont_endpoints = {-1, -1, -1, -1},
+ .instat_endpoint = 0x87,
+ .indat_endpoint = -1,
+ .glocont_endpoint = 0x07,
+ .calculate_baud_rate = keyspan_usa19w_calc_baud,
+ .baudclk = KEYSPAN_USA49W_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa49wlc_device_details = {
+ .product_id = keyspan_usa49wlc_product_id,
+ .msg_format = msg_usa49,
+ .num_ports = 4,
+ .indat_endp_flip = 0,
+ .outdat_endp_flip = 0,
+ .indat_endpoints = {0x81, 0x82, 0x83, 0x84},
+ .outdat_endpoints = {0x01, 0x02, 0x03, 0x04},
+ .inack_endpoints = {-1, -1, -1, -1},
+ .outcont_endpoints = {-1, -1, -1, -1},
+ .instat_endpoint = 0x87,
+ .indat_endpoint = -1,
+ .glocont_endpoint = 0x07,
+ .calculate_baud_rate = keyspan_usa19w_calc_baud,
+ .baudclk = KEYSPAN_USA19W_BAUDCLK,
+};
+
+static const struct keyspan_device_details usa49wg_device_details = {
+ .product_id = keyspan_usa49wg_product_id,
+ .msg_format = msg_usa49,
+ .num_ports = 4,
+ .indat_endp_flip = 0,
+ .outdat_endp_flip = 0,
+ .indat_endpoints = {-1, -1, -1, -1}, /* single 'global' data in EP */
+ .outdat_endpoints = {0x01, 0x02, 0x04, 0x06},
+ .inack_endpoints = {-1, -1, -1, -1},
+ .outcont_endpoints = {-1, -1, -1, -1},
+ .instat_endpoint = 0x81,
+ .indat_endpoint = 0x88,
+ .glocont_endpoint = 0x00, /* uses control EP */
+ .calculate_baud_rate = keyspan_usa19w_calc_baud,
+ .baudclk = KEYSPAN_USA19W_BAUDCLK,
+};
+
+static const struct keyspan_device_details *keyspan_devices[] = {
+ &usa18x_device_details,
+ &usa19_device_details,
+ &usa19qi_device_details,
+ &mpr_device_details,
+ &usa19qw_device_details,
+ &usa19w_device_details,
+ &usa19hs_device_details,
+ &usa28_device_details,
+ &usa28x_device_details,
+ &usa28xa_device_details,
+ &usa28xg_device_details,
+ /* 28xb not required as it renumerates as a 28x */
+ &usa49w_device_details,
+ &usa49wlc_device_details,
+ &usa49wg_device_details,
+ NULL,
+};
+
+static const struct usb_device_id keyspan_ids_combined[] = {
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19hs_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id)},
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)},
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)},
+ { } /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, keyspan_ids_combined);
+
+/* usb_device_id table for the pre-firmware download keyspan devices */
+static const struct usb_device_id keyspan_pre_ids[] = {
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_pre_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_pre_product_id) },
+ { } /* Terminating entry */
+};
+
+static const struct usb_device_id keyspan_1port_ids[] = {
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19hs_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_product_id) },
+ { } /* Terminating entry */
+};
+
+static const struct usb_device_id keyspan_2port_ids[] = {
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) },
+ { } /* Terminating entry */
+};
+
+static const struct usb_device_id keyspan_4port_ids[] = {
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)},
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)},
+ { } /* Terminating entry */
+};
+
+#define INSTAT_BUFLEN 32
+#define GLOCONT_BUFLEN 64
+#define INDAT49W_BUFLEN 512
+#define IN_BUFLEN 64
+#define OUT_BUFLEN 64
+#define INACK_BUFLEN 1
+#define OUTCONT_BUFLEN 64
+
+ /* Per device and per port private data */
+struct keyspan_serial_private {
+ const struct keyspan_device_details *device_details;
+
+ struct urb *instat_urb;
+ char *instat_buf;
+
+ /* added to support 49wg, where data from all 4 ports comes in
+ on 1 EP and high-speed supported */
+ struct urb *indat_urb;
+ char *indat_buf;
+
+ /* XXX this one probably will need a lock */
+ struct urb *glocont_urb;
+ char *glocont_buf;
+ char *ctrl_buf; /* for EP0 control message */
+};
+
+struct keyspan_port_private {
+ /* Keep track of which input & output endpoints to use */
+ int in_flip;
+ int out_flip;
+
+ /* Keep duplicate of device details in each port
+ structure as well - simplifies some of the
+ callback functions etc. */
+ const struct keyspan_device_details *device_details;
+
+ /* Input endpoints and buffer for this port */
+ struct urb *in_urbs[2];
+ char *in_buffer[2];
+ /* Output endpoints and buffer for this port */
+ struct urb *out_urbs[2];
+ char *out_buffer[2];
+
+ /* Input ack endpoint */
+ struct urb *inack_urb;
+ char *inack_buffer;
+
+ /* Output control endpoint */
+ struct urb *outcont_urb;
+ char *outcont_buffer;
+
+ /* Settings for the port */
+ int baud;
+ int old_baud;
+ unsigned int cflag;
+ unsigned int old_cflag;
+ enum {flow_none, flow_cts, flow_xon} flow_control;
+ int rts_state; /* Handshaking pins (outputs) */
+ int dtr_state;
+ int cts_state; /* Handshaking pins (inputs) */
+ int dsr_state;
+ int dcd_state;
+ int ri_state;
+ int break_on;
+
+ unsigned long tx_start_time[2];
+ int resend_cont; /* need to resend control packet */
+};
+
+/* Include Keyspan message headers. All current Keyspan Adapters
+ make use of one of five message formats which are referred
+ to as USA-26, USA-28, USA-49, USA-90, USA-67 by Keyspan and
+ within this driver. */
+#include "keyspan_usa26msg.h"
+#include "keyspan_usa28msg.h"
+#include "keyspan_usa49msg.h"
+#include "keyspan_usa90msg.h"
+#include "keyspan_usa67msg.h"
+
+
+static void keyspan_break_ctl(struct tty_struct *tty, int break_state)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct keyspan_port_private *p_priv;
+
+ p_priv = usb_get_serial_port_data(port);
+
+ if (break_state == -1)
+ p_priv->break_on = 1;
+ else
+ p_priv->break_on = 0;
+
+ keyspan_send_setup(port, 0);
+}
+
+
+static void keyspan_set_termios(struct tty_struct *tty,
+ struct usb_serial_port *port,
+ const struct ktermios *old_termios)
+{
+ int baud_rate, device_port;
+ struct keyspan_port_private *p_priv;
+ const struct keyspan_device_details *d_details;
+ unsigned int cflag;
+
+ p_priv = usb_get_serial_port_data(port);
+ d_details = p_priv->device_details;
+ cflag = tty->termios.c_cflag;
+ device_port = port->port_number;
+
+ /* Baud rate calculation takes baud rate as an integer
+ so other rates can be generated if desired. */
+ baud_rate = tty_get_baud_rate(tty);
+ /* If no match or invalid, don't change */
+ if (d_details->calculate_baud_rate(port, baud_rate, d_details->baudclk,
+ NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) {
+ /* FIXME - more to do here to ensure rate changes cleanly */
+ /* FIXME - calculate exact rate from divisor ? */
+ p_priv->baud = baud_rate;
+ } else
+ baud_rate = tty_termios_baud_rate(old_termios);
+
+ tty_encode_baud_rate(tty, baud_rate, baud_rate);
+ /* set CTS/RTS handshake etc. */
+ p_priv->cflag = cflag;
+ p_priv->flow_control = (cflag & CRTSCTS) ? flow_cts : flow_none;
+
+ /* Mark/Space not supported */
+ tty->termios.c_cflag &= ~CMSPAR;
+
+ keyspan_send_setup(port, 0);
+}
+
+static int keyspan_tiocmget(struct tty_struct *tty)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct keyspan_port_private *p_priv = usb_get_serial_port_data(port);
+ unsigned int value;
+
+ value = ((p_priv->rts_state) ? TIOCM_RTS : 0) |
+ ((p_priv->dtr_state) ? TIOCM_DTR : 0) |
+ ((p_priv->cts_state) ? TIOCM_CTS : 0) |
+ ((p_priv->dsr_state) ? TIOCM_DSR : 0) |
+ ((p_priv->dcd_state) ? TIOCM_CAR : 0) |
+ ((p_priv->ri_state) ? TIOCM_RNG : 0);
+
+ return value;
+}
+
+static int keyspan_tiocmset(struct tty_struct *tty,
+ unsigned int set, unsigned int clear)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct keyspan_port_private *p_priv = usb_get_serial_port_data(port);
+
+ if (set & TIOCM_RTS)
+ p_priv->rts_state = 1;
+ if (set & TIOCM_DTR)
+ p_priv->dtr_state = 1;
+ if (clear & TIOCM_RTS)
+ p_priv->rts_state = 0;
+ if (clear & TIOCM_DTR)
+ p_priv->dtr_state = 0;
+ keyspan_send_setup(port, 0);
+ return 0;
+}
+
+/* Write function is similar for the four protocols used
+ with only a minor change for usa90 (usa19hs) required */
+static int keyspan_write(struct tty_struct *tty,
+ struct usb_serial_port *port, const unsigned char *buf, int count)
+{
+ struct keyspan_port_private *p_priv;
+ const struct keyspan_device_details *d_details;
+ int flip;
+ int left, todo;
+ struct urb *this_urb;
+ int err, maxDataLen, dataOffset;
+
+ p_priv = usb_get_serial_port_data(port);
+ d_details = p_priv->device_details;
+
+ if (d_details->msg_format == msg_usa90) {
+ maxDataLen = 64;
+ dataOffset = 0;
+ } else {
+ maxDataLen = 63;
+ dataOffset = 1;
+ }
+
+ dev_dbg(&port->dev, "%s - %d chars, flip=%d\n", __func__, count,
+ p_priv->out_flip);
+
+ for (left = count; left > 0; left -= todo) {
+ todo = left;
+ if (todo > maxDataLen)
+ todo = maxDataLen;
+
+ flip = p_priv->out_flip;
+
+ /* Check we have a valid urb/endpoint before we use it... */
+ this_urb = p_priv->out_urbs[flip];
+ if (this_urb == NULL) {
+ /* no bulk out, so return 0 bytes written */
+ dev_dbg(&port->dev, "%s - no output urb :(\n", __func__);
+ return count;
+ }
+
+ dev_dbg(&port->dev, "%s - endpoint %x flip %d\n",
+ __func__, usb_pipeendpoint(this_urb->pipe), flip);
+
+ if (this_urb->status == -EINPROGRESS) {
+ if (time_before(jiffies,
+ p_priv->tx_start_time[flip] + 10 * HZ))
+ break;
+ usb_unlink_urb(this_urb);
+ break;
+ }
+
+ /* First byte in buffer is "last flag" (except for usa19hx)
+ - unused so for now so set to zero */
+ ((char *)this_urb->transfer_buffer)[0] = 0;
+
+ memcpy(this_urb->transfer_buffer + dataOffset, buf, todo);
+ buf += todo;
+
+ /* send the data out the bulk port */
+ this_urb->transfer_buffer_length = todo + dataOffset;
+
+ err = usb_submit_urb(this_urb, GFP_ATOMIC);
+ if (err != 0)
+ dev_dbg(&port->dev, "usb_submit_urb(write bulk) failed (%d)\n", err);
+ p_priv->tx_start_time[flip] = jiffies;
+
+ /* Flip for next time if usa26 or usa28 interface
+ (not used on usa49) */
+ p_priv->out_flip = (flip + 1) & d_details->outdat_endp_flip;
+ }
+
+ return count - left;
+}
+
+static void usa26_indat_callback(struct urb *urb)
+{
+ int i, err;
+ int endpoint;
+ struct usb_serial_port *port;
+ unsigned char *data = urb->transfer_buffer;
+ int status = urb->status;
+
+ endpoint = usb_pipeendpoint(urb->pipe);
+
+ if (status) {
+ dev_dbg(&urb->dev->dev, "%s - nonzero status %d on endpoint %x\n",
+ __func__, status, endpoint);
+ return;
+ }
+
+ port = urb->context;
+ if (urb->actual_length) {
+ /* 0x80 bit is error flag */
+ if ((data[0] & 0x80) == 0) {
+ /* no errors on individual bytes, only
+ possible overrun err */
+ if (data[0] & RXERROR_OVERRUN) {
+ tty_insert_flip_char(&port->port, 0,
+ TTY_OVERRUN);
+ }
+ for (i = 1; i < urb->actual_length ; ++i)
+ tty_insert_flip_char(&port->port, data[i],
+ TTY_NORMAL);
+ } else {
+ /* some bytes had errors, every byte has status */
+ dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__);
+ for (i = 0; i + 1 < urb->actual_length; i += 2) {
+ int stat = data[i];
+ int flag = TTY_NORMAL;
+
+ if (stat & RXERROR_OVERRUN) {
+ tty_insert_flip_char(&port->port, 0,
+ TTY_OVERRUN);
+ }
+ /* XXX should handle break (0x10) */
+ if (stat & RXERROR_PARITY)
+ flag = TTY_PARITY;
+ else if (stat & RXERROR_FRAMING)
+ flag = TTY_FRAME;
+
+ tty_insert_flip_char(&port->port, data[i+1],
+ flag);
+ }
+ }
+ tty_flip_buffer_push(&port->port);
+ }
+
+ /* Resubmit urb so we continue receiving */
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (err != 0)
+ dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
+}
+
+/* Outdat handling is common for all devices */
+static void usa2x_outdat_callback(struct urb *urb)
+{
+ struct usb_serial_port *port;
+ struct keyspan_port_private *p_priv;
+
+ port = urb->context;
+ p_priv = usb_get_serial_port_data(port);
+ dev_dbg(&port->dev, "%s - urb %d\n", __func__, urb == p_priv->out_urbs[1]);
+
+ usb_serial_port_softint(port);
+}
+
+static void usa26_inack_callback(struct urb *urb)
+{
+}
+
+static void usa26_outcont_callback(struct urb *urb)
+{
+ struct usb_serial_port *port;
+ struct keyspan_port_private *p_priv;
+
+ port = urb->context;
+ p_priv = usb_get_serial_port_data(port);
+
+ if (p_priv->resend_cont) {
+ dev_dbg(&port->dev, "%s - sending setup\n", __func__);
+ keyspan_usa26_send_setup(port->serial, port,
+ p_priv->resend_cont - 1);
+ }
+}
+
+static void usa26_instat_callback(struct urb *urb)
+{
+ unsigned char *data = urb->transfer_buffer;
+ struct keyspan_usa26_portStatusMessage *msg;
+ struct usb_serial *serial;
+ struct usb_serial_port *port;
+ struct keyspan_port_private *p_priv;
+ int old_dcd_state, err;
+ int status = urb->status;
+
+ serial = urb->context;
+
+ if (status) {
+ dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n",
+ __func__, status);
+ return;
+ }
+ if (urb->actual_length != 9) {
+ dev_dbg(&urb->dev->dev, "%s - %d byte report??\n", __func__, urb->actual_length);
+ goto exit;
+ }
+
+ msg = (struct keyspan_usa26_portStatusMessage *)data;
+
+ /* Check port number from message and retrieve private data */
+ if (msg->port >= serial->num_ports) {
+ dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port);
+ goto exit;
+ }
+ port = serial->port[msg->port];
+ p_priv = usb_get_serial_port_data(port);
+ if (!p_priv)
+ goto resubmit;
+
+ /* Update handshaking pin state information */
+ old_dcd_state = p_priv->dcd_state;
+ p_priv->cts_state = ((msg->hskia_cts) ? 1 : 0);
+ p_priv->dsr_state = ((msg->dsr) ? 1 : 0);
+ p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0);
+ p_priv->ri_state = ((msg->ri) ? 1 : 0);
+
+ if (old_dcd_state != p_priv->dcd_state)
+ tty_port_tty_hangup(&port->port, true);
+resubmit:
+ /* Resubmit urb so we continue receiving */
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (err != 0)
+ dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
+exit: ;
+}
+
+static void usa26_glocont_callback(struct urb *urb)
+{
+}
+
+
+static void usa28_indat_callback(struct urb *urb)
+{
+ int err;
+ struct usb_serial_port *port;
+ unsigned char *data;
+ struct keyspan_port_private *p_priv;
+ int status = urb->status;
+
+ port = urb->context;
+ p_priv = usb_get_serial_port_data(port);
+ data = urb->transfer_buffer;
+
+ if (urb != p_priv->in_urbs[p_priv->in_flip])
+ return;
+
+ do {
+ if (status) {
+ dev_dbg(&urb->dev->dev, "%s - nonzero status %d on endpoint %x\n",
+ __func__, status, usb_pipeendpoint(urb->pipe));
+ return;
+ }
+
+ port = urb->context;
+ p_priv = usb_get_serial_port_data(port);
+ data = urb->transfer_buffer;
+
+ if (urb->actual_length) {
+ tty_insert_flip_string(&port->port, data,
+ urb->actual_length);
+ tty_flip_buffer_push(&port->port);
+ }
+
+ /* Resubmit urb so we continue receiving */
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (err != 0)
+ dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n",
+ __func__, err);
+ p_priv->in_flip ^= 1;
+
+ urb = p_priv->in_urbs[p_priv->in_flip];
+ } while (urb->status != -EINPROGRESS);
+}
+
+static void usa28_inack_callback(struct urb *urb)
+{
+}
+
+static void usa28_outcont_callback(struct urb *urb)
+{
+ struct usb_serial_port *port;
+ struct keyspan_port_private *p_priv;
+
+ port = urb->context;
+ p_priv = usb_get_serial_port_data(port);
+
+ if (p_priv->resend_cont) {
+ dev_dbg(&port->dev, "%s - sending setup\n", __func__);
+ keyspan_usa28_send_setup(port->serial, port,
+ p_priv->resend_cont - 1);
+ }
+}
+
+static void usa28_instat_callback(struct urb *urb)
+{
+ int err;
+ unsigned char *data = urb->transfer_buffer;
+ struct keyspan_usa28_portStatusMessage *msg;
+ struct usb_serial *serial;
+ struct usb_serial_port *port;
+ struct keyspan_port_private *p_priv;
+ int old_dcd_state;
+ int status = urb->status;
+
+ serial = urb->context;
+
+ if (status) {
+ dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n",
+ __func__, status);
+ return;
+ }
+
+ if (urb->actual_length != sizeof(struct keyspan_usa28_portStatusMessage)) {
+ dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length);
+ goto exit;
+ }
+
+ msg = (struct keyspan_usa28_portStatusMessage *)data;
+
+ /* Check port number from message and retrieve private data */
+ if (msg->port >= serial->num_ports) {
+ dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port);
+ goto exit;
+ }
+ port = serial->port[msg->port];
+ p_priv = usb_get_serial_port_data(port);
+ if (!p_priv)
+ goto resubmit;
+
+ /* Update handshaking pin state information */
+ old_dcd_state = p_priv->dcd_state;
+ p_priv->cts_state = ((msg->cts) ? 1 : 0);
+ p_priv->dsr_state = ((msg->dsr) ? 1 : 0);
+ p_priv->dcd_state = ((msg->dcd) ? 1 : 0);
+ p_priv->ri_state = ((msg->ri) ? 1 : 0);
+
+ if (old_dcd_state != p_priv->dcd_state && old_dcd_state)
+ tty_port_tty_hangup(&port->port, true);
+resubmit:
+ /* Resubmit urb so we continue receiving */
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (err != 0)
+ dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
+exit: ;
+}
+
+static void usa28_glocont_callback(struct urb *urb)
+{
+}
+
+
+static void usa49_glocont_callback(struct urb *urb)
+{
+ struct usb_serial *serial;
+ struct usb_serial_port *port;
+ struct keyspan_port_private *p_priv;
+ int i;
+
+ serial = urb->context;
+ for (i = 0; i < serial->num_ports; ++i) {
+ port = serial->port[i];
+ p_priv = usb_get_serial_port_data(port);
+ if (!p_priv)
+ continue;
+
+ if (p_priv->resend_cont) {
+ dev_dbg(&port->dev, "%s - sending setup\n", __func__);
+ keyspan_usa49_send_setup(serial, port,
+ p_priv->resend_cont - 1);
+ break;
+ }
+ }
+}
+
+ /* This is actually called glostat in the Keyspan
+ doco */
+static void usa49_instat_callback(struct urb *urb)
+{
+ int err;
+ unsigned char *data = urb->transfer_buffer;
+ struct keyspan_usa49_portStatusMessage *msg;
+ struct usb_serial *serial;
+ struct usb_serial_port *port;
+ struct keyspan_port_private *p_priv;
+ int old_dcd_state;
+ int status = urb->status;
+
+ serial = urb->context;
+
+ if (status) {
+ dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n",
+ __func__, status);
+ return;
+ }
+
+ if (urb->actual_length !=
+ sizeof(struct keyspan_usa49_portStatusMessage)) {
+ dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length);
+ goto exit;
+ }
+
+ msg = (struct keyspan_usa49_portStatusMessage *)data;
+
+ /* Check port number from message and retrieve private data */
+ if (msg->portNumber >= serial->num_ports) {
+ dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n",
+ __func__, msg->portNumber);
+ goto exit;
+ }
+ port = serial->port[msg->portNumber];
+ p_priv = usb_get_serial_port_data(port);
+ if (!p_priv)
+ goto resubmit;
+
+ /* Update handshaking pin state information */
+ old_dcd_state = p_priv->dcd_state;
+ p_priv->cts_state = ((msg->cts) ? 1 : 0);
+ p_priv->dsr_state = ((msg->dsr) ? 1 : 0);
+ p_priv->dcd_state = ((msg->dcd) ? 1 : 0);
+ p_priv->ri_state = ((msg->ri) ? 1 : 0);
+
+ if (old_dcd_state != p_priv->dcd_state && old_dcd_state)
+ tty_port_tty_hangup(&port->port, true);
+resubmit:
+ /* Resubmit urb so we continue receiving */
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (err != 0)
+ dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
+exit: ;
+}
+
+static void usa49_inack_callback(struct urb *urb)
+{
+}
+
+static void usa49_indat_callback(struct urb *urb)
+{
+ int i, err;
+ int endpoint;
+ struct usb_serial_port *port;
+ unsigned char *data = urb->transfer_buffer;
+ int status = urb->status;
+
+ endpoint = usb_pipeendpoint(urb->pipe);
+
+ if (status) {
+ dev_dbg(&urb->dev->dev, "%s - nonzero status %d on endpoint %x\n",
+ __func__, status, endpoint);
+ return;
+ }
+
+ port = urb->context;
+ if (urb->actual_length) {
+ /* 0x80 bit is error flag */
+ if ((data[0] & 0x80) == 0) {
+ /* no error on any byte */
+ tty_insert_flip_string(&port->port, data + 1,
+ urb->actual_length - 1);
+ } else {
+ /* some bytes had errors, every byte has status */
+ for (i = 0; i + 1 < urb->actual_length; i += 2) {
+ int stat = data[i];
+ int flag = TTY_NORMAL;
+
+ if (stat & RXERROR_OVERRUN) {
+ tty_insert_flip_char(&port->port, 0,
+ TTY_OVERRUN);
+ }
+ /* XXX should handle break (0x10) */
+ if (stat & RXERROR_PARITY)
+ flag = TTY_PARITY;
+ else if (stat & RXERROR_FRAMING)
+ flag = TTY_FRAME;
+
+ tty_insert_flip_char(&port->port, data[i+1],
+ flag);
+ }
+ }
+ tty_flip_buffer_push(&port->port);
+ }
+
+ /* Resubmit urb so we continue receiving */
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (err != 0)
+ dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
+}
+
+static void usa49wg_indat_callback(struct urb *urb)
+{
+ int i, len, x, err;
+ struct usb_serial *serial;
+ struct usb_serial_port *port;
+ unsigned char *data = urb->transfer_buffer;
+ int status = urb->status;
+
+ serial = urb->context;
+
+ if (status) {
+ dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n",
+ __func__, status);
+ return;
+ }
+
+ /* inbound data is in the form P#, len, status, data */
+ i = 0;
+ len = 0;
+
+ while (i < urb->actual_length) {
+
+ /* Check port number from message */
+ if (data[i] >= serial->num_ports) {
+ dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n",
+ __func__, data[i]);
+ return;
+ }
+ port = serial->port[data[i++]];
+ len = data[i++];
+
+ /* 0x80 bit is error flag */
+ if ((data[i] & 0x80) == 0) {
+ /* no error on any byte */
+ i++;
+ for (x = 1; x < len && i < urb->actual_length; ++x)
+ tty_insert_flip_char(&port->port,
+ data[i++], 0);
+ } else {
+ /*
+ * some bytes had errors, every byte has status
+ */
+ for (x = 0; x + 1 < len &&
+ i + 1 < urb->actual_length; x += 2) {
+ int stat = data[i];
+ int flag = TTY_NORMAL;
+
+ if (stat & RXERROR_OVERRUN) {
+ tty_insert_flip_char(&port->port, 0,
+ TTY_OVERRUN);
+ }
+ /* XXX should handle break (0x10) */
+ if (stat & RXERROR_PARITY)
+ flag = TTY_PARITY;
+ else if (stat & RXERROR_FRAMING)
+ flag = TTY_FRAME;
+
+ tty_insert_flip_char(&port->port, data[i+1],
+ flag);
+ i += 2;
+ }
+ }
+ tty_flip_buffer_push(&port->port);
+ }
+
+ /* Resubmit urb so we continue receiving */
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (err != 0)
+ dev_dbg(&urb->dev->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
+}
+
+/* not used, usa-49 doesn't have per-port control endpoints */
+static void usa49_outcont_callback(struct urb *urb)
+{
+}
+
+static void usa90_indat_callback(struct urb *urb)
+{
+ int i, err;
+ int endpoint;
+ struct usb_serial_port *port;
+ struct keyspan_port_private *p_priv;
+ unsigned char *data = urb->transfer_buffer;
+ int status = urb->status;
+
+ endpoint = usb_pipeendpoint(urb->pipe);
+
+ if (status) {
+ dev_dbg(&urb->dev->dev, "%s - nonzero status %d on endpoint %x\n",
+ __func__, status, endpoint);
+ return;
+ }
+
+ port = urb->context;
+ p_priv = usb_get_serial_port_data(port);
+
+ if (urb->actual_length) {
+ /* if current mode is DMA, looks like usa28 format
+ otherwise looks like usa26 data format */
+
+ if (p_priv->baud > 57600)
+ tty_insert_flip_string(&port->port, data,
+ urb->actual_length);
+ else {
+ /* 0x80 bit is error flag */
+ if ((data[0] & 0x80) == 0) {
+ /* no errors on individual bytes, only
+ possible overrun err*/
+ if (data[0] & RXERROR_OVERRUN) {
+ tty_insert_flip_char(&port->port, 0,
+ TTY_OVERRUN);
+ }
+ for (i = 1; i < urb->actual_length ; ++i)
+ tty_insert_flip_char(&port->port,
+ data[i], TTY_NORMAL);
+ } else {
+ /* some bytes had errors, every byte has status */
+ dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__);
+ for (i = 0; i + 1 < urb->actual_length; i += 2) {
+ int stat = data[i];
+ int flag = TTY_NORMAL;
+
+ if (stat & RXERROR_OVERRUN) {
+ tty_insert_flip_char(
+ &port->port, 0,
+ TTY_OVERRUN);
+ }
+ /* XXX should handle break (0x10) */
+ if (stat & RXERROR_PARITY)
+ flag = TTY_PARITY;
+ else if (stat & RXERROR_FRAMING)
+ flag = TTY_FRAME;
+
+ tty_insert_flip_char(&port->port,
+ data[i+1], flag);
+ }
+ }
+ }
+ tty_flip_buffer_push(&port->port);
+ }
+
+ /* Resubmit urb so we continue receiving */
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (err != 0)
+ dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
+}
+
+
+static void usa90_instat_callback(struct urb *urb)
+{
+ unsigned char *data = urb->transfer_buffer;
+ struct keyspan_usa90_portStatusMessage *msg;
+ struct usb_serial *serial;
+ struct usb_serial_port *port;
+ struct keyspan_port_private *p_priv;
+ int old_dcd_state, err;
+ int status = urb->status;
+
+ serial = urb->context;
+
+ if (status) {
+ dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n",
+ __func__, status);
+ return;
+ }
+ if (urb->actual_length < 14) {
+ dev_dbg(&urb->dev->dev, "%s - %d byte report??\n", __func__, urb->actual_length);
+ goto exit;
+ }
+
+ msg = (struct keyspan_usa90_portStatusMessage *)data;
+
+ /* Now do something useful with the data */
+
+ port = serial->port[0];
+ p_priv = usb_get_serial_port_data(port);
+ if (!p_priv)
+ goto resubmit;
+
+ /* Update handshaking pin state information */
+ old_dcd_state = p_priv->dcd_state;
+ p_priv->cts_state = ((msg->cts) ? 1 : 0);
+ p_priv->dsr_state = ((msg->dsr) ? 1 : 0);
+ p_priv->dcd_state = ((msg->dcd) ? 1 : 0);
+ p_priv->ri_state = ((msg->ri) ? 1 : 0);
+
+ if (old_dcd_state != p_priv->dcd_state && old_dcd_state)
+ tty_port_tty_hangup(&port->port, true);
+resubmit:
+ /* Resubmit urb so we continue receiving */
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (err != 0)
+ dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
+exit:
+ ;
+}
+
+static void usa90_outcont_callback(struct urb *urb)
+{
+ struct usb_serial_port *port;
+ struct keyspan_port_private *p_priv;
+
+ port = urb->context;
+ p_priv = usb_get_serial_port_data(port);
+
+ if (p_priv->resend_cont) {
+ dev_dbg(&urb->dev->dev, "%s - sending setup\n", __func__);
+ keyspan_usa90_send_setup(port->serial, port,
+ p_priv->resend_cont - 1);
+ }
+}
+
+/* Status messages from the 28xg */
+static void usa67_instat_callback(struct urb *urb)
+{
+ int err;
+ unsigned char *data = urb->transfer_buffer;
+ struct keyspan_usa67_portStatusMessage *msg;
+ struct usb_serial *serial;
+ struct usb_serial_port *port;
+ struct keyspan_port_private *p_priv;
+ int old_dcd_state;
+ int status = urb->status;
+
+ serial = urb->context;
+
+ if (status) {
+ dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n",
+ __func__, status);
+ return;
+ }
+
+ if (urb->actual_length !=
+ sizeof(struct keyspan_usa67_portStatusMessage)) {
+ dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length);
+ return;
+ }
+
+
+ /* Now do something useful with the data */
+ msg = (struct keyspan_usa67_portStatusMessage *)data;
+
+ /* Check port number from message and retrieve private data */
+ if (msg->port >= serial->num_ports) {
+ dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port);
+ return;
+ }
+
+ port = serial->port[msg->port];
+ p_priv = usb_get_serial_port_data(port);
+ if (!p_priv)
+ goto resubmit;
+
+ /* Update handshaking pin state information */
+ old_dcd_state = p_priv->dcd_state;
+ p_priv->cts_state = ((msg->hskia_cts) ? 1 : 0);
+ p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0);
+
+ if (old_dcd_state != p_priv->dcd_state && old_dcd_state)
+ tty_port_tty_hangup(&port->port, true);
+resubmit:
+ /* Resubmit urb so we continue receiving */
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (err != 0)
+ dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
+}
+
+static void usa67_glocont_callback(struct urb *urb)
+{
+ struct usb_serial *serial;
+ struct usb_serial_port *port;
+ struct keyspan_port_private *p_priv;
+ int i;
+
+ serial = urb->context;
+ for (i = 0; i < serial->num_ports; ++i) {
+ port = serial->port[i];
+ p_priv = usb_get_serial_port_data(port);
+ if (!p_priv)
+ continue;
+
+ if (p_priv->resend_cont) {
+ dev_dbg(&port->dev, "%s - sending setup\n", __func__);
+ keyspan_usa67_send_setup(serial, port,
+ p_priv->resend_cont - 1);
+ break;
+ }
+ }
+}
+
+static unsigned int keyspan_write_room(struct tty_struct *tty)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct keyspan_port_private *p_priv;
+ const struct keyspan_device_details *d_details;
+ int flip;
+ unsigned int data_len;
+ struct urb *this_urb;
+
+ p_priv = usb_get_serial_port_data(port);
+ d_details = p_priv->device_details;
+
+ /* FIXME: locking */
+ if (d_details->msg_format == msg_usa90)
+ data_len = 64;
+ else
+ data_len = 63;
+
+ flip = p_priv->out_flip;
+
+ /* Check both endpoints to see if any are available. */
+ this_urb = p_priv->out_urbs[flip];
+ if (this_urb != NULL) {
+ if (this_urb->status != -EINPROGRESS)
+ return data_len;
+ flip = (flip + 1) & d_details->outdat_endp_flip;
+ this_urb = p_priv->out_urbs[flip];
+ if (this_urb != NULL) {
+ if (this_urb->status != -EINPROGRESS)
+ return data_len;
+ }
+ }
+ return 0;
+}
+
+
+static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+ struct keyspan_port_private *p_priv;
+ const struct keyspan_device_details *d_details;
+ int i, err;
+ int baud_rate, device_port;
+ struct urb *urb;
+ unsigned int cflag = 0;
+
+ p_priv = usb_get_serial_port_data(port);
+ d_details = p_priv->device_details;
+
+ /* Set some sane defaults */
+ p_priv->rts_state = 1;
+ p_priv->dtr_state = 1;
+ p_priv->baud = 9600;
+
+ /* force baud and lcr to be set on open */
+ p_priv->old_baud = 0;
+ p_priv->old_cflag = 0;
+
+ p_priv->out_flip = 0;
+ p_priv->in_flip = 0;
+
+ /* Reset low level data toggle and start reading from endpoints */
+ for (i = 0; i < 2; i++) {
+ urb = p_priv->in_urbs[i];
+ if (urb == NULL)
+ continue;
+
+ /* make sure endpoint data toggle is synchronized
+ with the device */
+ usb_clear_halt(urb->dev, urb->pipe);
+ err = usb_submit_urb(urb, GFP_KERNEL);
+ if (err != 0)
+ dev_dbg(&port->dev, "%s - submit urb %d failed (%d)\n", __func__, i, err);
+ }
+
+ /* Reset low level data toggle on out endpoints */
+ for (i = 0; i < 2; i++) {
+ urb = p_priv->out_urbs[i];
+ if (urb == NULL)
+ continue;
+ /* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+ usb_pipeout(urb->pipe), 0); */
+ }
+
+ /* get the terminal config for the setup message now so we don't
+ * need to send 2 of them */
+
+ device_port = port->port_number;
+ if (tty) {
+ cflag = tty->termios.c_cflag;
+ /* Baud rate calculation takes baud rate as an integer
+ so other rates can be generated if desired. */
+ baud_rate = tty_get_baud_rate(tty);
+ /* If no match or invalid, leave as default */
+ if (baud_rate >= 0
+ && d_details->calculate_baud_rate(port, baud_rate, d_details->baudclk,
+ NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) {
+ p_priv->baud = baud_rate;
+ }
+ }
+ /* set CTS/RTS handshake etc. */
+ p_priv->cflag = cflag;
+ p_priv->flow_control = (cflag & CRTSCTS) ? flow_cts : flow_none;
+
+ keyspan_send_setup(port, 1);
+ /* mdelay(100); */
+ /* keyspan_set_termios(port, NULL); */
+
+ return 0;
+}
+
+static void keyspan_dtr_rts(struct usb_serial_port *port, int on)
+{
+ struct keyspan_port_private *p_priv = usb_get_serial_port_data(port);
+
+ p_priv->rts_state = on;
+ p_priv->dtr_state = on;
+ keyspan_send_setup(port, 0);
+}
+
+static void keyspan_close(struct usb_serial_port *port)
+{
+ int i;
+ struct keyspan_port_private *p_priv;
+
+ p_priv = usb_get_serial_port_data(port);
+
+ p_priv->rts_state = 0;
+ p_priv->dtr_state = 0;
+
+ keyspan_send_setup(port, 2);
+ /* pilot-xfer seems to work best with this delay */
+ mdelay(100);
+
+ p_priv->out_flip = 0;
+ p_priv->in_flip = 0;
+
+ usb_kill_urb(p_priv->inack_urb);
+ for (i = 0; i < 2; i++) {
+ usb_kill_urb(p_priv->in_urbs[i]);
+ usb_kill_urb(p_priv->out_urbs[i]);
+ }
+}
+
+/* download the firmware to a pre-renumeration device */
+static int keyspan_fake_startup(struct usb_serial *serial)
+{
+ char *fw_name;
+
+ dev_dbg(&serial->dev->dev, "Keyspan startup version %04x product %04x\n",
+ le16_to_cpu(serial->dev->descriptor.bcdDevice),
+ le16_to_cpu(serial->dev->descriptor.idProduct));
+
+ if ((le16_to_cpu(serial->dev->descriptor.bcdDevice) & 0x8000)
+ != 0x8000) {
+ dev_dbg(&serial->dev->dev, "Firmware already loaded. Quitting.\n");
+ return 1;
+ }
+
+ /* Select firmware image on the basis of idProduct */
+ switch (le16_to_cpu(serial->dev->descriptor.idProduct)) {
+ case keyspan_usa28_pre_product_id:
+ fw_name = "keyspan/usa28.fw";
+ break;
+
+ case keyspan_usa28x_pre_product_id:
+ fw_name = "keyspan/usa28x.fw";
+ break;
+
+ case keyspan_usa28xa_pre_product_id:
+ fw_name = "keyspan/usa28xa.fw";
+ break;
+
+ case keyspan_usa28xb_pre_product_id:
+ fw_name = "keyspan/usa28xb.fw";
+ break;
+
+ case keyspan_usa19_pre_product_id:
+ fw_name = "keyspan/usa19.fw";
+ break;
+
+ case keyspan_usa19qi_pre_product_id:
+ fw_name = "keyspan/usa19qi.fw";
+ break;
+
+ case keyspan_mpr_pre_product_id:
+ fw_name = "keyspan/mpr.fw";
+ break;
+
+ case keyspan_usa19qw_pre_product_id:
+ fw_name = "keyspan/usa19qw.fw";
+ break;
+
+ case keyspan_usa18x_pre_product_id:
+ fw_name = "keyspan/usa18x.fw";
+ break;
+
+ case keyspan_usa19w_pre_product_id:
+ fw_name = "keyspan/usa19w.fw";
+ break;
+
+ case keyspan_usa49w_pre_product_id:
+ fw_name = "keyspan/usa49w.fw";
+ break;
+
+ case keyspan_usa49wlc_pre_product_id:
+ fw_name = "keyspan/usa49wlc.fw";
+ break;
+
+ default:
+ dev_err(&serial->dev->dev, "Unknown product ID (%04x)\n",
+ le16_to_cpu(serial->dev->descriptor.idProduct));
+ return 1;
+ }
+
+ dev_dbg(&serial->dev->dev, "Uploading Keyspan %s firmware.\n", fw_name);
+
+ if (ezusb_fx1_ihex_firmware_download(serial->dev, fw_name) < 0) {
+ dev_err(&serial->dev->dev, "failed to load firmware \"%s\"\n",
+ fw_name);
+ return -ENOENT;
+ }
+
+ /* after downloading firmware Renumeration will occur in a
+ moment and the new device will bind to the real driver */
+
+ /* we don't want this device to have a driver assigned to it. */
+ return 1;
+}
+
+/* Helper functions used by keyspan_setup_urbs */
+static struct usb_endpoint_descriptor const *find_ep(struct usb_serial const *serial,
+ int endpoint)
+{
+ struct usb_host_interface *iface_desc;
+ struct usb_endpoint_descriptor *ep;
+ int i;
+
+ iface_desc = serial->interface->cur_altsetting;
+ for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
+ ep = &iface_desc->endpoint[i].desc;
+ if (ep->bEndpointAddress == endpoint)
+ return ep;
+ }
+ dev_warn(&serial->interface->dev, "found no endpoint descriptor for endpoint %x\n",
+ endpoint);
+ return NULL;
+}
+
+static struct urb *keyspan_setup_urb(struct usb_serial *serial, int endpoint,
+ int dir, void *ctx, char *buf, int len,
+ void (*callback)(struct urb *))
+{
+ struct urb *urb;
+ struct usb_endpoint_descriptor const *ep_desc;
+ char const *ep_type_name;
+
+ if (endpoint == -1)
+ return NULL; /* endpoint not needed */
+
+ dev_dbg(&serial->interface->dev, "%s - alloc for endpoint %x\n",
+ __func__, endpoint);
+ urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */
+ if (!urb)
+ return NULL;
+
+ if (endpoint == 0) {
+ /* control EP filled in when used */
+ return urb;
+ }
+
+ ep_desc = find_ep(serial, endpoint);
+ if (!ep_desc) {
+ usb_free_urb(urb);
+ return NULL;
+ }
+ if (usb_endpoint_xfer_int(ep_desc)) {
+ ep_type_name = "INT";
+ usb_fill_int_urb(urb, serial->dev,
+ usb_sndintpipe(serial->dev, endpoint) | dir,
+ buf, len, callback, ctx,
+ ep_desc->bInterval);
+ } else if (usb_endpoint_xfer_bulk(ep_desc)) {
+ ep_type_name = "BULK";
+ usb_fill_bulk_urb(urb, serial->dev,
+ usb_sndbulkpipe(serial->dev, endpoint) | dir,
+ buf, len, callback, ctx);
+ } else {
+ dev_warn(&serial->interface->dev,
+ "unsupported endpoint type %x\n",
+ usb_endpoint_type(ep_desc));
+ usb_free_urb(urb);
+ return NULL;
+ }
+
+ dev_dbg(&serial->interface->dev, "%s - using urb %p for %s endpoint %x\n",
+ __func__, urb, ep_type_name, endpoint);
+ return urb;
+}
+
+static struct callbacks {
+ void (*instat_callback)(struct urb *);
+ void (*glocont_callback)(struct urb *);
+ void (*indat_callback)(struct urb *);
+ void (*outdat_callback)(struct urb *);
+ void (*inack_callback)(struct urb *);
+ void (*outcont_callback)(struct urb *);
+} keyspan_callbacks[] = {
+ {
+ /* msg_usa26 callbacks */
+ .instat_callback = usa26_instat_callback,
+ .glocont_callback = usa26_glocont_callback,
+ .indat_callback = usa26_indat_callback,
+ .outdat_callback = usa2x_outdat_callback,
+ .inack_callback = usa26_inack_callback,
+ .outcont_callback = usa26_outcont_callback,
+ }, {
+ /* msg_usa28 callbacks */
+ .instat_callback = usa28_instat_callback,
+ .glocont_callback = usa28_glocont_callback,
+ .indat_callback = usa28_indat_callback,
+ .outdat_callback = usa2x_outdat_callback,
+ .inack_callback = usa28_inack_callback,
+ .outcont_callback = usa28_outcont_callback,
+ }, {
+ /* msg_usa49 callbacks */
+ .instat_callback = usa49_instat_callback,
+ .glocont_callback = usa49_glocont_callback,
+ .indat_callback = usa49_indat_callback,
+ .outdat_callback = usa2x_outdat_callback,
+ .inack_callback = usa49_inack_callback,
+ .outcont_callback = usa49_outcont_callback,
+ }, {
+ /* msg_usa90 callbacks */
+ .instat_callback = usa90_instat_callback,
+ .glocont_callback = usa28_glocont_callback,
+ .indat_callback = usa90_indat_callback,
+ .outdat_callback = usa2x_outdat_callback,
+ .inack_callback = usa28_inack_callback,
+ .outcont_callback = usa90_outcont_callback,
+ }, {
+ /* msg_usa67 callbacks */
+ .instat_callback = usa67_instat_callback,
+ .glocont_callback = usa67_glocont_callback,
+ .indat_callback = usa26_indat_callback,
+ .outdat_callback = usa2x_outdat_callback,
+ .inack_callback = usa26_inack_callback,
+ .outcont_callback = usa26_outcont_callback,
+ }
+};
+
+ /* Generic setup urbs function that uses
+ data in device_details */
+static void keyspan_setup_urbs(struct usb_serial *serial)
+{
+ struct keyspan_serial_private *s_priv;
+ const struct keyspan_device_details *d_details;
+ struct callbacks *cback;
+
+ s_priv = usb_get_serial_data(serial);
+ d_details = s_priv->device_details;
+
+ /* Setup values for the various callback routines */
+ cback = &keyspan_callbacks[d_details->msg_format];
+
+ /* Allocate and set up urbs for each one that is in use,
+ starting with instat endpoints */
+ s_priv->instat_urb = keyspan_setup_urb
+ (serial, d_details->instat_endpoint, USB_DIR_IN,
+ serial, s_priv->instat_buf, INSTAT_BUFLEN,
+ cback->instat_callback);
+
+ s_priv->indat_urb = keyspan_setup_urb
+ (serial, d_details->indat_endpoint, USB_DIR_IN,
+ serial, s_priv->indat_buf, INDAT49W_BUFLEN,
+ usa49wg_indat_callback);
+
+ s_priv->glocont_urb = keyspan_setup_urb
+ (serial, d_details->glocont_endpoint, USB_DIR_OUT,
+ serial, s_priv->glocont_buf, GLOCONT_BUFLEN,
+ cback->glocont_callback);
+}
+
+/* usa19 function doesn't require prescaler */
+static int keyspan_usa19_calc_baud(struct usb_serial_port *port,
+ u32 baud_rate, u32 baudclk, u8 *rate_hi,
+ u8 *rate_low, u8 *prescaler, int portnum)
+{
+ u32 b16, /* baud rate times 16 (actual rate used internally) */
+ div, /* divisor */
+ cnt; /* inverse of divisor (programmed into 8051) */
+
+ dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate);
+
+ /* prevent divide by zero... */
+ b16 = baud_rate * 16L;
+ if (b16 == 0)
+ return KEYSPAN_INVALID_BAUD_RATE;
+ /* Any "standard" rate over 57k6 is marginal on the USA-19
+ as we run out of divisor resolution. */
+ if (baud_rate > 57600)
+ return KEYSPAN_INVALID_BAUD_RATE;
+
+ /* calculate the divisor and the counter (its inverse) */
+ div = baudclk / b16;
+ if (div == 0)
+ return KEYSPAN_INVALID_BAUD_RATE;
+ else
+ cnt = 0 - div;
+
+ if (div > 0xffff)
+ return KEYSPAN_INVALID_BAUD_RATE;
+
+ /* return the counter values if non-null */
+ if (rate_low)
+ *rate_low = (u8) (cnt & 0xff);
+ if (rate_hi)
+ *rate_hi = (u8) ((cnt >> 8) & 0xff);
+ if (rate_low && rate_hi)
+ dev_dbg(&port->dev, "%s - %d %02x %02x.\n",
+ __func__, baud_rate, *rate_hi, *rate_low);
+ return KEYSPAN_BAUD_RATE_OK;
+}
+
+/* usa19hs function doesn't require prescaler */
+static int keyspan_usa19hs_calc_baud(struct usb_serial_port *port,
+ u32 baud_rate, u32 baudclk, u8 *rate_hi,
+ u8 *rate_low, u8 *prescaler, int portnum)
+{
+ u32 b16, /* baud rate times 16 (actual rate used internally) */
+ div; /* divisor */
+
+ dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate);
+
+ /* prevent divide by zero... */
+ b16 = baud_rate * 16L;
+ if (b16 == 0)
+ return KEYSPAN_INVALID_BAUD_RATE;
+
+ /* calculate the divisor */
+ div = baudclk / b16;
+ if (div == 0)
+ return KEYSPAN_INVALID_BAUD_RATE;
+
+ if (div > 0xffff)
+ return KEYSPAN_INVALID_BAUD_RATE;
+
+ /* return the counter values if non-null */
+ if (rate_low)
+ *rate_low = (u8) (div & 0xff);
+
+ if (rate_hi)
+ *rate_hi = (u8) ((div >> 8) & 0xff);
+
+ if (rate_low && rate_hi)
+ dev_dbg(&port->dev, "%s - %d %02x %02x.\n",
+ __func__, baud_rate, *rate_hi, *rate_low);
+
+ return KEYSPAN_BAUD_RATE_OK;
+}
+
+static int keyspan_usa19w_calc_baud(struct usb_serial_port *port,
+ u32 baud_rate, u32 baudclk, u8 *rate_hi,
+ u8 *rate_low, u8 *prescaler, int portnum)
+{
+ u32 b16, /* baud rate times 16 (actual rate used internally) */
+ clk, /* clock with 13/8 prescaler */
+ div, /* divisor using 13/8 prescaler */
+ res, /* resulting baud rate using 13/8 prescaler */
+ diff, /* error using 13/8 prescaler */
+ smallest_diff;
+ u8 best_prescaler;
+ int i;
+
+ dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate);
+
+ /* prevent divide by zero */
+ b16 = baud_rate * 16L;
+ if (b16 == 0)
+ return KEYSPAN_INVALID_BAUD_RATE;
+
+ /* Calculate prescaler by trying them all and looking
+ for best fit */
+
+ /* start with largest possible difference */
+ smallest_diff = 0xffffffff;
+
+ /* 0 is an invalid prescaler, used as a flag */
+ best_prescaler = 0;
+
+ for (i = 8; i <= 0xff; ++i) {
+ clk = (baudclk * 8) / (u32) i;
+
+ div = clk / b16;
+ if (div == 0)
+ continue;
+
+ res = clk / div;
+ diff = (res > b16) ? (res-b16) : (b16-res);
+
+ if (diff < smallest_diff) {
+ best_prescaler = i;
+ smallest_diff = diff;
+ }
+ }
+
+ if (best_prescaler == 0)
+ return KEYSPAN_INVALID_BAUD_RATE;
+
+ clk = (baudclk * 8) / (u32) best_prescaler;
+ div = clk / b16;
+
+ /* return the divisor and prescaler if non-null */
+ if (rate_low)
+ *rate_low = (u8) (div & 0xff);
+ if (rate_hi)
+ *rate_hi = (u8) ((div >> 8) & 0xff);
+ if (prescaler) {
+ *prescaler = best_prescaler;
+ /* dev_dbg(&port->dev, "%s - %d %d\n", __func__, *prescaler, div); */
+ }
+ return KEYSPAN_BAUD_RATE_OK;
+}
+
+ /* USA-28 supports different maximum baud rates on each port */
+static int keyspan_usa28_calc_baud(struct usb_serial_port *port,
+ u32 baud_rate, u32 baudclk, u8 *rate_hi,
+ u8 *rate_low, u8 *prescaler, int portnum)
+{
+ u32 b16, /* baud rate times 16 (actual rate used internally) */
+ div, /* divisor */
+ cnt; /* inverse of divisor (programmed into 8051) */
+
+ dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate);
+
+ /* prevent divide by zero */
+ b16 = baud_rate * 16L;
+ if (b16 == 0)
+ return KEYSPAN_INVALID_BAUD_RATE;
+
+ /* calculate the divisor and the counter (its inverse) */
+ div = KEYSPAN_USA28_BAUDCLK / b16;
+ if (div == 0)
+ return KEYSPAN_INVALID_BAUD_RATE;
+ else
+ cnt = 0 - div;
+
+ /* check for out of range, based on portnum,
+ and return result */
+ if (portnum == 0) {
+ if (div > 0xffff)
+ return KEYSPAN_INVALID_BAUD_RATE;
+ } else {
+ if (portnum == 1) {
+ if (div > 0xff)
+ return KEYSPAN_INVALID_BAUD_RATE;
+ } else
+ return KEYSPAN_INVALID_BAUD_RATE;
+ }
+
+ /* return the counter values if not NULL
+ (port 1 will ignore retHi) */
+ if (rate_low)
+ *rate_low = (u8) (cnt & 0xff);
+ if (rate_hi)
+ *rate_hi = (u8) ((cnt >> 8) & 0xff);
+ dev_dbg(&port->dev, "%s - %d OK.\n", __func__, baud_rate);
+ return KEYSPAN_BAUD_RATE_OK;
+}
+
+static int keyspan_usa26_send_setup(struct usb_serial *serial,
+ struct usb_serial_port *port,
+ int reset_port)
+{
+ struct keyspan_usa26_portControlMessage msg;
+ struct keyspan_serial_private *s_priv;
+ struct keyspan_port_private *p_priv;
+ const struct keyspan_device_details *d_details;
+ struct urb *this_urb;
+ int device_port, err;
+
+ dev_dbg(&port->dev, "%s reset=%d\n", __func__, reset_port);
+
+ s_priv = usb_get_serial_data(serial);
+ p_priv = usb_get_serial_port_data(port);
+ d_details = s_priv->device_details;
+ device_port = port->port_number;
+
+ this_urb = p_priv->outcont_urb;
+
+ /* Make sure we have an urb then send the message */
+ if (this_urb == NULL) {
+ dev_dbg(&port->dev, "%s - oops no urb.\n", __func__);
+ return -1;
+ }
+
+ dev_dbg(&port->dev, "%s - endpoint %x\n",
+ __func__, usb_pipeendpoint(this_urb->pipe));
+
+ /* Save reset port val for resend.
+ Don't overwrite resend for open/close condition. */
+ if ((reset_port + 1) > p_priv->resend_cont)
+ p_priv->resend_cont = reset_port + 1;
+ if (this_urb->status == -EINPROGRESS) {
+ /* dev_dbg(&port->dev, "%s - already writing\n", __func__); */
+ mdelay(5);
+ return -1;
+ }
+
+ memset(&msg, 0, sizeof(struct keyspan_usa26_portControlMessage));
+
+ /* Only set baud rate if it's changed */
+ if (p_priv->old_baud != p_priv->baud) {
+ p_priv->old_baud = p_priv->baud;
+ msg.setClocking = 0xff;
+ if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk,
+ &msg.baudHi, &msg.baudLo, &msg.prescaler,
+ device_port) == KEYSPAN_INVALID_BAUD_RATE) {
+ dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n",
+ __func__, p_priv->baud);
+ msg.baudLo = 0;
+ msg.baudHi = 125; /* Values for 9600 baud */
+ msg.prescaler = 10;
+ }
+ msg.setPrescaler = 0xff;
+ }
+
+ msg.lcr = (p_priv->cflag & CSTOPB) ? STOPBITS_678_2 : STOPBITS_5678_1;
+ switch (p_priv->cflag & CSIZE) {
+ case CS5:
+ msg.lcr |= USA_DATABITS_5;
+ break;
+ case CS6:
+ msg.lcr |= USA_DATABITS_6;
+ break;
+ case CS7:
+ msg.lcr |= USA_DATABITS_7;
+ break;
+ case CS8:
+ msg.lcr |= USA_DATABITS_8;
+ break;
+ }
+ if (p_priv->cflag & PARENB) {
+ /* note USA_PARITY_NONE == 0 */
+ msg.lcr |= (p_priv->cflag & PARODD) ?
+ USA_PARITY_ODD : USA_PARITY_EVEN;
+ }
+ msg.setLcr = 0xff;
+
+ msg.ctsFlowControl = (p_priv->flow_control == flow_cts);
+ msg.xonFlowControl = 0;
+ msg.setFlowControl = 0xff;
+ msg.forwardingLength = 16;
+ msg.xonChar = 17;
+ msg.xoffChar = 19;
+
+ /* Opening port */
+ if (reset_port == 1) {
+ msg._txOn = 1;
+ msg._txOff = 0;
+ msg.txFlush = 0;
+ msg.txBreak = 0;
+ msg.rxOn = 1;
+ msg.rxOff = 0;
+ msg.rxFlush = 1;
+ msg.rxForward = 0;
+ msg.returnStatus = 0;
+ msg.resetDataToggle = 0xff;
+ }
+
+ /* Closing port */
+ else if (reset_port == 2) {
+ msg._txOn = 0;
+ msg._txOff = 1;
+ msg.txFlush = 0;
+ msg.txBreak = 0;
+ msg.rxOn = 0;
+ msg.rxOff = 1;
+ msg.rxFlush = 1;
+ msg.rxForward = 0;
+ msg.returnStatus = 0;
+ msg.resetDataToggle = 0;
+ }
+
+ /* Sending intermediate configs */
+ else {
+ msg._txOn = (!p_priv->break_on);
+ msg._txOff = 0;
+ msg.txFlush = 0;
+ msg.txBreak = (p_priv->break_on);
+ msg.rxOn = 0;
+ msg.rxOff = 0;
+ msg.rxFlush = 0;
+ msg.rxForward = 0;
+ msg.returnStatus = 0;
+ msg.resetDataToggle = 0x0;
+ }
+
+ /* Do handshaking outputs */
+ msg.setTxTriState_setRts = 0xff;
+ msg.txTriState_rts = p_priv->rts_state;
+
+ msg.setHskoa_setDtr = 0xff;
+ msg.hskoa_dtr = p_priv->dtr_state;
+
+ p_priv->resend_cont = 0;
+ memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));
+
+ /* send the data out the device on control endpoint */
+ this_urb->transfer_buffer_length = sizeof(msg);
+
+ err = usb_submit_urb(this_urb, GFP_ATOMIC);
+ if (err != 0)
+ dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err);
+ return 0;
+}
+
+static int keyspan_usa28_send_setup(struct usb_serial *serial,
+ struct usb_serial_port *port,
+ int reset_port)
+{
+ struct keyspan_usa28_portControlMessage msg;
+ struct keyspan_serial_private *s_priv;
+ struct keyspan_port_private *p_priv;
+ const struct keyspan_device_details *d_details;
+ struct urb *this_urb;
+ int device_port, err;
+
+ s_priv = usb_get_serial_data(serial);
+ p_priv = usb_get_serial_port_data(port);
+ d_details = s_priv->device_details;
+ device_port = port->port_number;
+
+ /* only do something if we have a bulk out endpoint */
+ this_urb = p_priv->outcont_urb;
+ if (this_urb == NULL) {
+ dev_dbg(&port->dev, "%s - oops no urb.\n", __func__);
+ return -1;
+ }
+
+ /* Save reset port val for resend.
+ Don't overwrite resend for open/close condition. */
+ if ((reset_port + 1) > p_priv->resend_cont)
+ p_priv->resend_cont = reset_port + 1;
+ if (this_urb->status == -EINPROGRESS) {
+ dev_dbg(&port->dev, "%s already writing\n", __func__);
+ mdelay(5);
+ return -1;
+ }
+
+ memset(&msg, 0, sizeof(struct keyspan_usa28_portControlMessage));
+
+ msg.setBaudRate = 1;
+ if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk,
+ &msg.baudHi, &msg.baudLo, NULL,
+ device_port) == KEYSPAN_INVALID_BAUD_RATE) {
+ dev_dbg(&port->dev, "%s - Invalid baud rate requested %d.\n",
+ __func__, p_priv->baud);
+ msg.baudLo = 0xff;
+ msg.baudHi = 0xb2; /* Values for 9600 baud */
+ }
+
+ /* If parity is enabled, we must calculate it ourselves. */
+ msg.parity = 0; /* XXX for now */
+
+ msg.ctsFlowControl = (p_priv->flow_control == flow_cts);
+ msg.xonFlowControl = 0;
+
+ /* Do handshaking outputs, DTR is inverted relative to RTS */
+ msg.rts = p_priv->rts_state;
+ msg.dtr = p_priv->dtr_state;
+
+ msg.forwardingLength = 16;
+ msg.forwardMs = 10;
+ msg.breakThreshold = 45;
+ msg.xonChar = 17;
+ msg.xoffChar = 19;
+
+ /*msg.returnStatus = 1;
+ msg.resetDataToggle = 0xff;*/
+ /* Opening port */
+ if (reset_port == 1) {
+ msg._txOn = 1;
+ msg._txOff = 0;
+ msg.txFlush = 0;
+ msg.txForceXoff = 0;
+ msg.txBreak = 0;
+ msg.rxOn = 1;
+ msg.rxOff = 0;
+ msg.rxFlush = 1;
+ msg.rxForward = 0;
+ msg.returnStatus = 0;
+ msg.resetDataToggle = 0xff;
+ }
+ /* Closing port */
+ else if (reset_port == 2) {
+ msg._txOn = 0;
+ msg._txOff = 1;
+ msg.txFlush = 0;
+ msg.txForceXoff = 0;
+ msg.txBreak = 0;
+ msg.rxOn = 0;
+ msg.rxOff = 1;
+ msg.rxFlush = 1;
+ msg.rxForward = 0;
+ msg.returnStatus = 0;
+ msg.resetDataToggle = 0;
+ }
+ /* Sending intermediate configs */
+ else {
+ msg._txOn = (!p_priv->break_on);
+ msg._txOff = 0;
+ msg.txFlush = 0;
+ msg.txForceXoff = 0;
+ msg.txBreak = (p_priv->break_on);
+ msg.rxOn = 0;
+ msg.rxOff = 0;
+ msg.rxFlush = 0;
+ msg.rxForward = 0;
+ msg.returnStatus = 0;
+ msg.resetDataToggle = 0x0;
+ }
+
+ p_priv->resend_cont = 0;
+ memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));
+
+ /* send the data out the device on control endpoint */
+ this_urb->transfer_buffer_length = sizeof(msg);
+
+ err = usb_submit_urb(this_urb, GFP_ATOMIC);
+ if (err != 0)
+ dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed\n", __func__);
+
+ return 0;
+}
+
+static int keyspan_usa49_send_setup(struct usb_serial *serial,
+ struct usb_serial_port *port,
+ int reset_port)
+{
+ struct keyspan_usa49_portControlMessage msg;
+ struct usb_ctrlrequest *dr = NULL;
+ struct keyspan_serial_private *s_priv;
+ struct keyspan_port_private *p_priv;
+ const struct keyspan_device_details *d_details;
+ struct urb *this_urb;
+ int err, device_port;
+
+ s_priv = usb_get_serial_data(serial);
+ p_priv = usb_get_serial_port_data(port);
+ d_details = s_priv->device_details;
+
+ this_urb = s_priv->glocont_urb;
+
+ /* Work out which port within the device is being setup */
+ device_port = port->port_number;
+
+ /* Make sure we have an urb then send the message */
+ if (this_urb == NULL) {
+ dev_dbg(&port->dev, "%s - oops no urb for port.\n", __func__);
+ return -1;
+ }
+
+ dev_dbg(&port->dev, "%s - endpoint %x (%d)\n",
+ __func__, usb_pipeendpoint(this_urb->pipe), device_port);
+
+ /* Save reset port val for resend.
+ Don't overwrite resend for open/close condition. */
+ if ((reset_port + 1) > p_priv->resend_cont)
+ p_priv->resend_cont = reset_port + 1;
+
+ if (this_urb->status == -EINPROGRESS) {
+ /* dev_dbg(&port->dev, "%s - already writing\n", __func__); */
+ mdelay(5);
+ return -1;
+ }
+
+ memset(&msg, 0, sizeof(struct keyspan_usa49_portControlMessage));
+
+ msg.portNumber = device_port;
+
+ /* Only set baud rate if it's changed */
+ if (p_priv->old_baud != p_priv->baud) {
+ p_priv->old_baud = p_priv->baud;
+ msg.setClocking = 0xff;
+ if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk,
+ &msg.baudHi, &msg.baudLo, &msg.prescaler,
+ device_port) == KEYSPAN_INVALID_BAUD_RATE) {
+ dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n",
+ __func__, p_priv->baud);
+ msg.baudLo = 0;
+ msg.baudHi = 125; /* Values for 9600 baud */
+ msg.prescaler = 10;
+ }
+ /* msg.setPrescaler = 0xff; */
+ }
+
+ msg.lcr = (p_priv->cflag & CSTOPB) ? STOPBITS_678_2 : STOPBITS_5678_1;
+ switch (p_priv->cflag & CSIZE) {
+ case CS5:
+ msg.lcr |= USA_DATABITS_5;
+ break;
+ case CS6:
+ msg.lcr |= USA_DATABITS_6;
+ break;
+ case CS7:
+ msg.lcr |= USA_DATABITS_7;
+ break;
+ case CS8:
+ msg.lcr |= USA_DATABITS_8;
+ break;
+ }
+ if (p_priv->cflag & PARENB) {
+ /* note USA_PARITY_NONE == 0 */
+ msg.lcr |= (p_priv->cflag & PARODD) ?
+ USA_PARITY_ODD : USA_PARITY_EVEN;
+ }
+ msg.setLcr = 0xff;
+
+ msg.ctsFlowControl = (p_priv->flow_control == flow_cts);
+ msg.xonFlowControl = 0;
+ msg.setFlowControl = 0xff;
+
+ msg.forwardingLength = 16;
+ msg.xonChar = 17;
+ msg.xoffChar = 19;
+
+ /* Opening port */
+ if (reset_port == 1) {
+ msg._txOn = 1;
+ msg._txOff = 0;
+ msg.txFlush = 0;
+ msg.txBreak = 0;
+ msg.rxOn = 1;
+ msg.rxOff = 0;
+ msg.rxFlush = 1;
+ msg.rxForward = 0;
+ msg.returnStatus = 0;
+ msg.resetDataToggle = 0xff;
+ msg.enablePort = 1;
+ msg.disablePort = 0;
+ }
+ /* Closing port */
+ else if (reset_port == 2) {
+ msg._txOn = 0;
+ msg._txOff = 1;
+ msg.txFlush = 0;
+ msg.txBreak = 0;
+ msg.rxOn = 0;
+ msg.rxOff = 1;
+ msg.rxFlush = 1;
+ msg.rxForward = 0;
+ msg.returnStatus = 0;
+ msg.resetDataToggle = 0;
+ msg.enablePort = 0;
+ msg.disablePort = 1;
+ }
+ /* Sending intermediate configs */
+ else {
+ msg._txOn = (!p_priv->break_on);
+ msg._txOff = 0;
+ msg.txFlush = 0;
+ msg.txBreak = (p_priv->break_on);
+ msg.rxOn = 0;
+ msg.rxOff = 0;
+ msg.rxFlush = 0;
+ msg.rxForward = 0;
+ msg.returnStatus = 0;
+ msg.resetDataToggle = 0x0;
+ msg.enablePort = 0;
+ msg.disablePort = 0;
+ }
+
+ /* Do handshaking outputs */
+ msg.setRts = 0xff;
+ msg.rts = p_priv->rts_state;
+
+ msg.setDtr = 0xff;
+ msg.dtr = p_priv->dtr_state;
+
+ p_priv->resend_cont = 0;
+
+ /* if the device is a 49wg, we send control message on usb
+ control EP 0 */
+
+ if (d_details->product_id == keyspan_usa49wg_product_id) {
+ dr = (void *)(s_priv->ctrl_buf);
+ dr->bRequestType = USB_TYPE_VENDOR | USB_DIR_OUT;
+ dr->bRequest = 0xB0; /* 49wg control message */
+ dr->wValue = 0;
+ dr->wIndex = 0;
+ dr->wLength = cpu_to_le16(sizeof(msg));
+
+ memcpy(s_priv->glocont_buf, &msg, sizeof(msg));
+
+ usb_fill_control_urb(this_urb, serial->dev,
+ usb_sndctrlpipe(serial->dev, 0),
+ (unsigned char *)dr, s_priv->glocont_buf,
+ sizeof(msg), usa49_glocont_callback, serial);
+
+ } else {
+ memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));
+
+ /* send the data out the device on control endpoint */
+ this_urb->transfer_buffer_length = sizeof(msg);
+ }
+ err = usb_submit_urb(this_urb, GFP_ATOMIC);
+ if (err != 0)
+ dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err);
+
+ return 0;
+}
+
+static int keyspan_usa90_send_setup(struct usb_serial *serial,
+ struct usb_serial_port *port,
+ int reset_port)
+{
+ struct keyspan_usa90_portControlMessage msg;
+ struct keyspan_serial_private *s_priv;
+ struct keyspan_port_private *p_priv;
+ const struct keyspan_device_details *d_details;
+ struct urb *this_urb;
+ int err;
+ u8 prescaler;
+
+ s_priv = usb_get_serial_data(serial);
+ p_priv = usb_get_serial_port_data(port);
+ d_details = s_priv->device_details;
+
+ /* only do something if we have a bulk out endpoint */
+ this_urb = p_priv->outcont_urb;
+ if (this_urb == NULL) {
+ dev_dbg(&port->dev, "%s - oops no urb.\n", __func__);
+ return -1;
+ }
+
+ /* Save reset port val for resend.
+ Don't overwrite resend for open/close condition. */
+ if ((reset_port + 1) > p_priv->resend_cont)
+ p_priv->resend_cont = reset_port + 1;
+ if (this_urb->status == -EINPROGRESS) {
+ dev_dbg(&port->dev, "%s already writing\n", __func__);
+ mdelay(5);
+ return -1;
+ }
+
+ memset(&msg, 0, sizeof(struct keyspan_usa90_portControlMessage));
+
+ /* Only set baud rate if it's changed */
+ if (p_priv->old_baud != p_priv->baud) {
+ p_priv->old_baud = p_priv->baud;
+ msg.setClocking = 0x01;
+ if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk,
+ &msg.baudHi, &msg.baudLo, &prescaler, 0) == KEYSPAN_INVALID_BAUD_RATE) {
+ dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n",
+ __func__, p_priv->baud);
+ p_priv->baud = 9600;
+ d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk,
+ &msg.baudHi, &msg.baudLo, &prescaler, 0);
+ }
+ msg.setRxMode = 1;
+ msg.setTxMode = 1;
+ }
+
+ /* modes must always be correctly specified */
+ if (p_priv->baud > 57600) {
+ msg.rxMode = RXMODE_DMA;
+ msg.txMode = TXMODE_DMA;
+ } else {
+ msg.rxMode = RXMODE_BYHAND;
+ msg.txMode = TXMODE_BYHAND;
+ }
+
+ msg.lcr = (p_priv->cflag & CSTOPB) ? STOPBITS_678_2 : STOPBITS_5678_1;
+ switch (p_priv->cflag & CSIZE) {
+ case CS5:
+ msg.lcr |= USA_DATABITS_5;
+ break;
+ case CS6:
+ msg.lcr |= USA_DATABITS_6;
+ break;
+ case CS7:
+ msg.lcr |= USA_DATABITS_7;
+ break;
+ case CS8:
+ msg.lcr |= USA_DATABITS_8;
+ break;
+ }
+ if (p_priv->cflag & PARENB) {
+ /* note USA_PARITY_NONE == 0 */
+ msg.lcr |= (p_priv->cflag & PARODD) ?
+ USA_PARITY_ODD : USA_PARITY_EVEN;
+ }
+ if (p_priv->old_cflag != p_priv->cflag) {
+ p_priv->old_cflag = p_priv->cflag;
+ msg.setLcr = 0x01;
+ }
+
+ if (p_priv->flow_control == flow_cts)
+ msg.txFlowControl = TXFLOW_CTS;
+ msg.setTxFlowControl = 0x01;
+ msg.setRxFlowControl = 0x01;
+
+ msg.rxForwardingLength = 16;
+ msg.rxForwardingTimeout = 16;
+ msg.txAckSetting = 0;
+ msg.xonChar = 17;
+ msg.xoffChar = 19;
+
+ /* Opening port */
+ if (reset_port == 1) {
+ msg.portEnabled = 1;
+ msg.rxFlush = 1;
+ msg.txBreak = (p_priv->break_on);
+ }
+ /* Closing port */
+ else if (reset_port == 2)
+ msg.portEnabled = 0;
+ /* Sending intermediate configs */
+ else {
+ msg.portEnabled = 1;
+ msg.txBreak = (p_priv->break_on);
+ }
+
+ /* Do handshaking outputs */
+ msg.setRts = 0x01;
+ msg.rts = p_priv->rts_state;
+
+ msg.setDtr = 0x01;
+ msg.dtr = p_priv->dtr_state;
+
+ p_priv->resend_cont = 0;
+ memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));
+
+ /* send the data out the device on control endpoint */
+ this_urb->transfer_buffer_length = sizeof(msg);
+
+ err = usb_submit_urb(this_urb, GFP_ATOMIC);
+ if (err != 0)
+ dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err);
+ return 0;
+}
+
+static int keyspan_usa67_send_setup(struct usb_serial *serial,
+ struct usb_serial_port *port,
+ int reset_port)
+{
+ struct keyspan_usa67_portControlMessage msg;
+ struct keyspan_serial_private *s_priv;
+ struct keyspan_port_private *p_priv;
+ const struct keyspan_device_details *d_details;
+ struct urb *this_urb;
+ int err, device_port;
+
+ s_priv = usb_get_serial_data(serial);
+ p_priv = usb_get_serial_port_data(port);
+ d_details = s_priv->device_details;
+
+ this_urb = s_priv->glocont_urb;
+
+ /* Work out which port within the device is being setup */
+ device_port = port->port_number;
+
+ /* Make sure we have an urb then send the message */
+ if (this_urb == NULL) {
+ dev_dbg(&port->dev, "%s - oops no urb for port.\n", __func__);
+ return -1;
+ }
+
+ /* Save reset port val for resend.
+ Don't overwrite resend for open/close condition. */
+ if ((reset_port + 1) > p_priv->resend_cont)
+ p_priv->resend_cont = reset_port + 1;
+ if (this_urb->status == -EINPROGRESS) {
+ /* dev_dbg(&port->dev, "%s - already writing\n", __func__); */
+ mdelay(5);
+ return -1;
+ }
+
+ memset(&msg, 0, sizeof(struct keyspan_usa67_portControlMessage));
+
+ msg.port = device_port;
+
+ /* Only set baud rate if it's changed */
+ if (p_priv->old_baud != p_priv->baud) {
+ p_priv->old_baud = p_priv->baud;
+ msg.setClocking = 0xff;
+ if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk,
+ &msg.baudHi, &msg.baudLo, &msg.prescaler,
+ device_port) == KEYSPAN_INVALID_BAUD_RATE) {
+ dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n",
+ __func__, p_priv->baud);
+ msg.baudLo = 0;
+ msg.baudHi = 125; /* Values for 9600 baud */
+ msg.prescaler = 10;
+ }
+ msg.setPrescaler = 0xff;
+ }
+
+ msg.lcr = (p_priv->cflag & CSTOPB) ? STOPBITS_678_2 : STOPBITS_5678_1;
+ switch (p_priv->cflag & CSIZE) {
+ case CS5:
+ msg.lcr |= USA_DATABITS_5;
+ break;
+ case CS6:
+ msg.lcr |= USA_DATABITS_6;
+ break;
+ case CS7:
+ msg.lcr |= USA_DATABITS_7;
+ break;
+ case CS8:
+ msg.lcr |= USA_DATABITS_8;
+ break;
+ }
+ if (p_priv->cflag & PARENB) {
+ /* note USA_PARITY_NONE == 0 */
+ msg.lcr |= (p_priv->cflag & PARODD) ?
+ USA_PARITY_ODD : USA_PARITY_EVEN;
+ }
+ msg.setLcr = 0xff;
+
+ msg.ctsFlowControl = (p_priv->flow_control == flow_cts);
+ msg.xonFlowControl = 0;
+ msg.setFlowControl = 0xff;
+ msg.forwardingLength = 16;
+ msg.xonChar = 17;
+ msg.xoffChar = 19;
+
+ if (reset_port == 1) {
+ /* Opening port */
+ msg._txOn = 1;
+ msg._txOff = 0;
+ msg.txFlush = 0;
+ msg.txBreak = 0;
+ msg.rxOn = 1;
+ msg.rxOff = 0;
+ msg.rxFlush = 1;
+ msg.rxForward = 0;
+ msg.returnStatus = 0;
+ msg.resetDataToggle = 0xff;
+ } else if (reset_port == 2) {
+ /* Closing port */
+ msg._txOn = 0;
+ msg._txOff = 1;
+ msg.txFlush = 0;
+ msg.txBreak = 0;
+ msg.rxOn = 0;
+ msg.rxOff = 1;
+ msg.rxFlush = 1;
+ msg.rxForward = 0;
+ msg.returnStatus = 0;
+ msg.resetDataToggle = 0;
+ } else {
+ /* Sending intermediate configs */
+ msg._txOn = (!p_priv->break_on);
+ msg._txOff = 0;
+ msg.txFlush = 0;
+ msg.txBreak = (p_priv->break_on);
+ msg.rxOn = 0;
+ msg.rxOff = 0;
+ msg.rxFlush = 0;
+ msg.rxForward = 0;
+ msg.returnStatus = 0;
+ msg.resetDataToggle = 0x0;
+ }
+
+ /* Do handshaking outputs */
+ msg.setTxTriState_setRts = 0xff;
+ msg.txTriState_rts = p_priv->rts_state;
+
+ msg.setHskoa_setDtr = 0xff;
+ msg.hskoa_dtr = p_priv->dtr_state;
+
+ p_priv->resend_cont = 0;
+
+ memcpy(this_urb->transfer_buffer, &msg, sizeof(msg));
+
+ /* send the data out the device on control endpoint */
+ this_urb->transfer_buffer_length = sizeof(msg);
+
+ err = usb_submit_urb(this_urb, GFP_ATOMIC);
+ if (err != 0)
+ dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err);
+ return 0;
+}
+
+static void keyspan_send_setup(struct usb_serial_port *port, int reset_port)
+{
+ struct usb_serial *serial = port->serial;
+ struct keyspan_serial_private *s_priv;
+ const struct keyspan_device_details *d_details;
+
+ s_priv = usb_get_serial_data(serial);
+ d_details = s_priv->device_details;
+
+ switch (d_details->msg_format) {
+ case msg_usa26:
+ keyspan_usa26_send_setup(serial, port, reset_port);
+ break;
+ case msg_usa28:
+ keyspan_usa28_send_setup(serial, port, reset_port);
+ break;
+ case msg_usa49:
+ keyspan_usa49_send_setup(serial, port, reset_port);
+ break;
+ case msg_usa90:
+ keyspan_usa90_send_setup(serial, port, reset_port);
+ break;
+ case msg_usa67:
+ keyspan_usa67_send_setup(serial, port, reset_port);
+ break;
+ }
+}
+
+
+/* Gets called by the "real" driver (ie once firmware is loaded
+ and renumeration has taken place. */
+static int keyspan_startup(struct usb_serial *serial)
+{
+ int i, err;
+ struct keyspan_serial_private *s_priv;
+ const struct keyspan_device_details *d_details;
+
+ for (i = 0; (d_details = keyspan_devices[i]) != NULL; ++i)
+ if (d_details->product_id ==
+ le16_to_cpu(serial->dev->descriptor.idProduct))
+ break;
+ if (d_details == NULL) {
+ dev_err(&serial->dev->dev, "%s - unknown product id %x\n",
+ __func__, le16_to_cpu(serial->dev->descriptor.idProduct));
+ return -ENODEV;
+ }
+
+ /* Setup private data for serial driver */
+ s_priv = kzalloc(sizeof(struct keyspan_serial_private), GFP_KERNEL);
+ if (!s_priv)
+ return -ENOMEM;
+
+ s_priv->instat_buf = kzalloc(INSTAT_BUFLEN, GFP_KERNEL);
+ if (!s_priv->instat_buf)
+ goto err_instat_buf;
+
+ s_priv->indat_buf = kzalloc(INDAT49W_BUFLEN, GFP_KERNEL);
+ if (!s_priv->indat_buf)
+ goto err_indat_buf;
+
+ s_priv->glocont_buf = kzalloc(GLOCONT_BUFLEN, GFP_KERNEL);
+ if (!s_priv->glocont_buf)
+ goto err_glocont_buf;
+
+ s_priv->ctrl_buf = kzalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
+ if (!s_priv->ctrl_buf)
+ goto err_ctrl_buf;
+
+ s_priv->device_details = d_details;
+ usb_set_serial_data(serial, s_priv);
+
+ keyspan_setup_urbs(serial);
+
+ if (s_priv->instat_urb != NULL) {
+ err = usb_submit_urb(s_priv->instat_urb, GFP_KERNEL);
+ if (err != 0)
+ dev_dbg(&serial->dev->dev, "%s - submit instat urb failed %d\n", __func__, err);
+ }
+ if (s_priv->indat_urb != NULL) {
+ err = usb_submit_urb(s_priv->indat_urb, GFP_KERNEL);
+ if (err != 0)
+ dev_dbg(&serial->dev->dev, "%s - submit indat urb failed %d\n", __func__, err);
+ }
+
+ return 0;
+
+err_ctrl_buf:
+ kfree(s_priv->glocont_buf);
+err_glocont_buf:
+ kfree(s_priv->indat_buf);
+err_indat_buf:
+ kfree(s_priv->instat_buf);
+err_instat_buf:
+ kfree(s_priv);
+
+ return -ENOMEM;
+}
+
+static void keyspan_disconnect(struct usb_serial *serial)
+{
+ struct keyspan_serial_private *s_priv;
+
+ s_priv = usb_get_serial_data(serial);
+
+ usb_kill_urb(s_priv->instat_urb);
+ usb_kill_urb(s_priv->glocont_urb);
+ usb_kill_urb(s_priv->indat_urb);
+}
+
+static void keyspan_release(struct usb_serial *serial)
+{
+ struct keyspan_serial_private *s_priv;
+
+ s_priv = usb_get_serial_data(serial);
+
+ /* Make sure to unlink the URBs submitted in attach. */
+ usb_kill_urb(s_priv->instat_urb);
+ usb_kill_urb(s_priv->indat_urb);
+
+ usb_free_urb(s_priv->instat_urb);
+ usb_free_urb(s_priv->indat_urb);
+ usb_free_urb(s_priv->glocont_urb);
+
+ kfree(s_priv->ctrl_buf);
+ kfree(s_priv->glocont_buf);
+ kfree(s_priv->indat_buf);
+ kfree(s_priv->instat_buf);
+
+ kfree(s_priv);
+}
+
+static int keyspan_port_probe(struct usb_serial_port *port)
+{
+ struct usb_serial *serial = port->serial;
+ struct keyspan_serial_private *s_priv;
+ struct keyspan_port_private *p_priv;
+ const struct keyspan_device_details *d_details;
+ struct callbacks *cback;
+ int endp;
+ int port_num;
+ int i;
+
+ s_priv = usb_get_serial_data(serial);
+ d_details = s_priv->device_details;
+
+ p_priv = kzalloc(sizeof(*p_priv), GFP_KERNEL);
+ if (!p_priv)
+ return -ENOMEM;
+
+ for (i = 0; i < ARRAY_SIZE(p_priv->in_buffer); ++i) {
+ p_priv->in_buffer[i] = kzalloc(IN_BUFLEN, GFP_KERNEL);
+ if (!p_priv->in_buffer[i])
+ goto err_free_in_buffer;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(p_priv->out_buffer); ++i) {
+ p_priv->out_buffer[i] = kzalloc(OUT_BUFLEN, GFP_KERNEL);
+ if (!p_priv->out_buffer[i])
+ goto err_free_out_buffer;
+ }
+
+ p_priv->inack_buffer = kzalloc(INACK_BUFLEN, GFP_KERNEL);
+ if (!p_priv->inack_buffer)
+ goto err_free_out_buffer;
+
+ p_priv->outcont_buffer = kzalloc(OUTCONT_BUFLEN, GFP_KERNEL);
+ if (!p_priv->outcont_buffer)
+ goto err_free_inack_buffer;
+
+ p_priv->device_details = d_details;
+
+ /* Setup values for the various callback routines */
+ cback = &keyspan_callbacks[d_details->msg_format];
+
+ port_num = port->port_number;
+
+ /* Do indat endpoints first, once for each flip */
+ endp = d_details->indat_endpoints[port_num];
+ for (i = 0; i <= d_details->indat_endp_flip; ++i, ++endp) {
+ p_priv->in_urbs[i] = keyspan_setup_urb(serial, endp,
+ USB_DIR_IN, port,
+ p_priv->in_buffer[i],
+ IN_BUFLEN,
+ cback->indat_callback);
+ }
+ /* outdat endpoints also have flip */
+ endp = d_details->outdat_endpoints[port_num];
+ for (i = 0; i <= d_details->outdat_endp_flip; ++i, ++endp) {
+ p_priv->out_urbs[i] = keyspan_setup_urb(serial, endp,
+ USB_DIR_OUT, port,
+ p_priv->out_buffer[i],
+ OUT_BUFLEN,
+ cback->outdat_callback);
+ }
+ /* inack endpoint */
+ p_priv->inack_urb = keyspan_setup_urb(serial,
+ d_details->inack_endpoints[port_num],
+ USB_DIR_IN, port,
+ p_priv->inack_buffer,
+ INACK_BUFLEN,
+ cback->inack_callback);
+ /* outcont endpoint */
+ p_priv->outcont_urb = keyspan_setup_urb(serial,
+ d_details->outcont_endpoints[port_num],
+ USB_DIR_OUT, port,
+ p_priv->outcont_buffer,
+ OUTCONT_BUFLEN,
+ cback->outcont_callback);
+
+ usb_set_serial_port_data(port, p_priv);
+
+ return 0;
+
+err_free_inack_buffer:
+ kfree(p_priv->inack_buffer);
+err_free_out_buffer:
+ for (i = 0; i < ARRAY_SIZE(p_priv->out_buffer); ++i)
+ kfree(p_priv->out_buffer[i]);
+err_free_in_buffer:
+ for (i = 0; i < ARRAY_SIZE(p_priv->in_buffer); ++i)
+ kfree(p_priv->in_buffer[i]);
+ kfree(p_priv);
+
+ return -ENOMEM;
+}
+
+static void keyspan_port_remove(struct usb_serial_port *port)
+{
+ struct keyspan_port_private *p_priv;
+ int i;
+
+ p_priv = usb_get_serial_port_data(port);
+
+ usb_kill_urb(p_priv->inack_urb);
+ usb_kill_urb(p_priv->outcont_urb);
+ for (i = 0; i < 2; i++) {
+ usb_kill_urb(p_priv->in_urbs[i]);
+ usb_kill_urb(p_priv->out_urbs[i]);
+ }
+
+ usb_free_urb(p_priv->inack_urb);
+ usb_free_urb(p_priv->outcont_urb);
+ for (i = 0; i < 2; i++) {
+ usb_free_urb(p_priv->in_urbs[i]);
+ usb_free_urb(p_priv->out_urbs[i]);
+ }
+
+ kfree(p_priv->outcont_buffer);
+ kfree(p_priv->inack_buffer);
+ for (i = 0; i < ARRAY_SIZE(p_priv->out_buffer); ++i)
+ kfree(p_priv->out_buffer[i]);
+ for (i = 0; i < ARRAY_SIZE(p_priv->in_buffer); ++i)
+ kfree(p_priv->in_buffer[i]);
+
+ kfree(p_priv);
+}
+
+/* Structs for the devices, pre and post renumeration. */
+static struct usb_serial_driver keyspan_pre_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "keyspan_no_firm",
+ },
+ .description = "Keyspan - (without firmware)",
+ .id_table = keyspan_pre_ids,
+ .num_ports = 1,
+ .attach = keyspan_fake_startup,
+};
+
+static struct usb_serial_driver keyspan_1port_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "keyspan_1",
+ },
+ .description = "Keyspan 1 port adapter",
+ .id_table = keyspan_1port_ids,
+ .num_ports = 1,
+ .open = keyspan_open,
+ .close = keyspan_close,
+ .dtr_rts = keyspan_dtr_rts,
+ .write = keyspan_write,
+ .write_room = keyspan_write_room,
+ .set_termios = keyspan_set_termios,
+ .break_ctl = keyspan_break_ctl,
+ .tiocmget = keyspan_tiocmget,
+ .tiocmset = keyspan_tiocmset,
+ .attach = keyspan_startup,
+ .disconnect = keyspan_disconnect,
+ .release = keyspan_release,
+ .port_probe = keyspan_port_probe,
+ .port_remove = keyspan_port_remove,
+};
+
+static struct usb_serial_driver keyspan_2port_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "keyspan_2",
+ },
+ .description = "Keyspan 2 port adapter",
+ .id_table = keyspan_2port_ids,
+ .num_ports = 2,
+ .open = keyspan_open,
+ .close = keyspan_close,
+ .dtr_rts = keyspan_dtr_rts,
+ .write = keyspan_write,
+ .write_room = keyspan_write_room,
+ .set_termios = keyspan_set_termios,
+ .break_ctl = keyspan_break_ctl,
+ .tiocmget = keyspan_tiocmget,
+ .tiocmset = keyspan_tiocmset,
+ .attach = keyspan_startup,
+ .disconnect = keyspan_disconnect,
+ .release = keyspan_release,
+ .port_probe = keyspan_port_probe,
+ .port_remove = keyspan_port_remove,
+};
+
+static struct usb_serial_driver keyspan_4port_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "keyspan_4",
+ },
+ .description = "Keyspan 4 port adapter",
+ .id_table = keyspan_4port_ids,
+ .num_ports = 4,
+ .open = keyspan_open,
+ .close = keyspan_close,
+ .dtr_rts = keyspan_dtr_rts,
+ .write = keyspan_write,
+ .write_room = keyspan_write_room,
+ .set_termios = keyspan_set_termios,
+ .break_ctl = keyspan_break_ctl,
+ .tiocmget = keyspan_tiocmget,
+ .tiocmset = keyspan_tiocmset,
+ .attach = keyspan_startup,
+ .disconnect = keyspan_disconnect,
+ .release = keyspan_release,
+ .port_probe = keyspan_port_probe,
+ .port_remove = keyspan_port_remove,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+ &keyspan_pre_device, &keyspan_1port_device,
+ &keyspan_2port_device, &keyspan_4port_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, keyspan_ids_combined);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+MODULE_FIRMWARE("keyspan/usa28.fw");
+MODULE_FIRMWARE("keyspan/usa28x.fw");
+MODULE_FIRMWARE("keyspan/usa28xa.fw");
+MODULE_FIRMWARE("keyspan/usa28xb.fw");
+MODULE_FIRMWARE("keyspan/usa19.fw");
+MODULE_FIRMWARE("keyspan/usa19qi.fw");
+MODULE_FIRMWARE("keyspan/mpr.fw");
+MODULE_FIRMWARE("keyspan/usa19qw.fw");
+MODULE_FIRMWARE("keyspan/usa18x.fw");
+MODULE_FIRMWARE("keyspan/usa19w.fw");
+MODULE_FIRMWARE("keyspan/usa49w.fw");
+MODULE_FIRMWARE("keyspan/usa49wlc.fw");