summaryrefslogtreecommitdiffstats
path: root/drivers/usb/storage/freecom.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/storage/freecom.c')
-rw-r--r--drivers/usb/storage/freecom.c578
1 files changed, 578 insertions, 0 deletions
diff --git a/drivers/usb/storage/freecom.c b/drivers/usb/storage/freecom.c
new file mode 100644
index 000000000..2b098b55c
--- /dev/null
+++ b/drivers/usb/storage/freecom.c
@@ -0,0 +1,578 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for Freecom USB/IDE adaptor
+ *
+ * Freecom v0.1:
+ *
+ * First release
+ *
+ * Current development and maintenance by:
+ * (C) 2000 David Brown <usb-storage@davidb.org>
+ *
+ * This driver was developed with information provided in FREECOM's USB
+ * Programmers Reference Guide. For further information contact Freecom
+ * (https://www.freecom.de/)
+ */
+
+#include <linux/module.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "protocol.h"
+#include "debug.h"
+#include "scsiglue.h"
+
+#define DRV_NAME "ums-freecom"
+
+MODULE_DESCRIPTION("Driver for Freecom USB/IDE adaptor");
+MODULE_AUTHOR("David Brown <usb-storage@davidb.org>");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(USB_STORAGE);
+
+#ifdef CONFIG_USB_STORAGE_DEBUG
+static void pdump(struct us_data *us, void *ibuffer, int length);
+#endif
+
+/* Bits of HD_STATUS */
+#define ERR_STAT 0x01
+#define DRQ_STAT 0x08
+
+/* All of the outgoing packets are 64 bytes long. */
+struct freecom_cb_wrap {
+ u8 Type; /* Command type. */
+ u8 Timeout; /* Timeout in seconds. */
+ u8 Atapi[12]; /* An ATAPI packet. */
+ u8 Filler[50]; /* Padding Data. */
+};
+
+struct freecom_xfer_wrap {
+ u8 Type; /* Command type. */
+ u8 Timeout; /* Timeout in seconds. */
+ __le32 Count; /* Number of bytes to transfer. */
+ u8 Pad[58];
+} __attribute__ ((packed));
+
+struct freecom_ide_out {
+ u8 Type; /* Type + IDE register. */
+ u8 Pad;
+ __le16 Value; /* Value to write. */
+ u8 Pad2[60];
+};
+
+struct freecom_ide_in {
+ u8 Type; /* Type | IDE register. */
+ u8 Pad[63];
+};
+
+struct freecom_status {
+ u8 Status;
+ u8 Reason;
+ __le16 Count;
+ u8 Pad[60];
+};
+
+/*
+ * Freecom stuffs the interrupt status in the INDEX_STAT bit of the ide
+ * register.
+ */
+#define FCM_INT_STATUS 0x02 /* INDEX_STAT */
+#define FCM_STATUS_BUSY 0x80
+
+/*
+ * These are the packet types. The low bit indicates that this command
+ * should wait for an interrupt.
+ */
+#define FCM_PACKET_ATAPI 0x21
+#define FCM_PACKET_STATUS 0x20
+
+/*
+ * Receive data from the IDE interface. The ATAPI packet has already
+ * waited, so the data should be immediately available.
+ */
+#define FCM_PACKET_INPUT 0x81
+
+/* Send data to the IDE interface. */
+#define FCM_PACKET_OUTPUT 0x01
+
+/*
+ * Write a value to an ide register. Or the ide register to write after
+ * munging the address a bit.
+ */
+#define FCM_PACKET_IDE_WRITE 0x40
+#define FCM_PACKET_IDE_READ 0xC0
+
+/* All packets (except for status) are 64 bytes long. */
+#define FCM_PACKET_LENGTH 64
+#define FCM_STATUS_PACKET_LENGTH 4
+
+static int init_freecom(struct us_data *us);
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+ vendorName, productName, useProtocol, useTransport, \
+ initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+ .driver_info = (flags) }
+
+static struct usb_device_id freecom_usb_ids[] = {
+# include "unusual_freecom.h"
+ { } /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, freecom_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+ vendor_name, product_name, use_protocol, use_transport, \
+ init_function, Flags) \
+{ \
+ .vendorName = vendor_name, \
+ .productName = product_name, \
+ .useProtocol = use_protocol, \
+ .useTransport = use_transport, \
+ .initFunction = init_function, \
+}
+
+static struct us_unusual_dev freecom_unusual_dev_list[] = {
+# include "unusual_freecom.h"
+ { } /* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+static int
+freecom_readdata (struct scsi_cmnd *srb, struct us_data *us,
+ unsigned int ipipe, unsigned int opipe, int count)
+{
+ struct freecom_xfer_wrap *fxfr =
+ (struct freecom_xfer_wrap *) us->iobuf;
+ int result;
+
+ fxfr->Type = FCM_PACKET_INPUT | 0x00;
+ fxfr->Timeout = 0; /* Short timeout for debugging. */
+ fxfr->Count = cpu_to_le32 (count);
+ memset (fxfr->Pad, 0, sizeof (fxfr->Pad));
+
+ usb_stor_dbg(us, "Read data Freecom! (c=%d)\n", count);
+
+ /* Issue the transfer command. */
+ result = usb_stor_bulk_transfer_buf (us, opipe, fxfr,
+ FCM_PACKET_LENGTH, NULL);
+ if (result != USB_STOR_XFER_GOOD) {
+ usb_stor_dbg(us, "Freecom readdata transport error\n");
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ /* Now transfer all of our blocks. */
+ usb_stor_dbg(us, "Start of read\n");
+ result = usb_stor_bulk_srb(us, ipipe, srb);
+ usb_stor_dbg(us, "freecom_readdata done!\n");
+
+ if (result > USB_STOR_XFER_SHORT)
+ return USB_STOR_TRANSPORT_ERROR;
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int
+freecom_writedata (struct scsi_cmnd *srb, struct us_data *us,
+ int unsigned ipipe, unsigned int opipe, int count)
+{
+ struct freecom_xfer_wrap *fxfr =
+ (struct freecom_xfer_wrap *) us->iobuf;
+ int result;
+
+ fxfr->Type = FCM_PACKET_OUTPUT | 0x00;
+ fxfr->Timeout = 0; /* Short timeout for debugging. */
+ fxfr->Count = cpu_to_le32 (count);
+ memset (fxfr->Pad, 0, sizeof (fxfr->Pad));
+
+ usb_stor_dbg(us, "Write data Freecom! (c=%d)\n", count);
+
+ /* Issue the transfer command. */
+ result = usb_stor_bulk_transfer_buf (us, opipe, fxfr,
+ FCM_PACKET_LENGTH, NULL);
+ if (result != USB_STOR_XFER_GOOD) {
+ usb_stor_dbg(us, "Freecom writedata transport error\n");
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ /* Now transfer all of our blocks. */
+ usb_stor_dbg(us, "Start of write\n");
+ result = usb_stor_bulk_srb(us, opipe, srb);
+
+ usb_stor_dbg(us, "freecom_writedata done!\n");
+ if (result > USB_STOR_XFER_SHORT)
+ return USB_STOR_TRANSPORT_ERROR;
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Transport for the Freecom USB/IDE adaptor.
+ *
+ */
+static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+ struct freecom_cb_wrap *fcb;
+ struct freecom_status *fst;
+ unsigned int ipipe, opipe; /* We need both pipes. */
+ int result;
+ unsigned int partial;
+ int length;
+
+ fcb = (struct freecom_cb_wrap *) us->iobuf;
+ fst = (struct freecom_status *) us->iobuf;
+
+ usb_stor_dbg(us, "Freecom TRANSPORT STARTED\n");
+
+ /* Get handles for both transports. */
+ opipe = us->send_bulk_pipe;
+ ipipe = us->recv_bulk_pipe;
+
+ /* The ATAPI Command always goes out first. */
+ fcb->Type = FCM_PACKET_ATAPI | 0x00;
+ fcb->Timeout = 0;
+ memcpy (fcb->Atapi, srb->cmnd, 12);
+ memset (fcb->Filler, 0, sizeof (fcb->Filler));
+
+ US_DEBUG(pdump(us, srb->cmnd, 12));
+
+ /* Send it out. */
+ result = usb_stor_bulk_transfer_buf (us, opipe, fcb,
+ FCM_PACKET_LENGTH, NULL);
+
+ /*
+ * The Freecom device will only fail if there is something wrong in
+ * USB land. It returns the status in its own registers, which
+ * come back in the bulk pipe.
+ */
+ if (result != USB_STOR_XFER_GOOD) {
+ usb_stor_dbg(us, "freecom transport error\n");
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ /*
+ * There are times we can optimize out this status read, but it
+ * doesn't hurt us to always do it now.
+ */
+ result = usb_stor_bulk_transfer_buf (us, ipipe, fst,
+ FCM_STATUS_PACKET_LENGTH, &partial);
+ usb_stor_dbg(us, "foo Status result %d %u\n", result, partial);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ US_DEBUG(pdump(us, (void *)fst, partial));
+
+ /*
+ * The firmware will time-out commands after 20 seconds. Some commands
+ * can legitimately take longer than this, so we use a different
+ * command that only waits for the interrupt and then sends status,
+ * without having to send a new ATAPI command to the device.
+ *
+ * NOTE: There is some indication that a data transfer after a timeout
+ * may not work, but that is a condition that should never happen.
+ */
+ while (fst->Status & FCM_STATUS_BUSY) {
+ usb_stor_dbg(us, "20 second USB/ATAPI bridge TIMEOUT occurred!\n");
+ usb_stor_dbg(us, "fst->Status is %x\n", fst->Status);
+
+ /* Get the status again */
+ fcb->Type = FCM_PACKET_STATUS;
+ fcb->Timeout = 0;
+ memset (fcb->Atapi, 0, sizeof(fcb->Atapi));
+ memset (fcb->Filler, 0, sizeof (fcb->Filler));
+
+ /* Send it out. */
+ result = usb_stor_bulk_transfer_buf (us, opipe, fcb,
+ FCM_PACKET_LENGTH, NULL);
+
+ /*
+ * The Freecom device will only fail if there is something
+ * wrong in USB land. It returns the status in its own
+ * registers, which come back in the bulk pipe.
+ */
+ if (result != USB_STOR_XFER_GOOD) {
+ usb_stor_dbg(us, "freecom transport error\n");
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ /* get the data */
+ result = usb_stor_bulk_transfer_buf (us, ipipe, fst,
+ FCM_STATUS_PACKET_LENGTH, &partial);
+
+ usb_stor_dbg(us, "bar Status result %d %u\n", result, partial);
+ if (result != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ US_DEBUG(pdump(us, (void *)fst, partial));
+ }
+
+ if (partial != 4)
+ return USB_STOR_TRANSPORT_ERROR;
+ if ((fst->Status & 1) != 0) {
+ usb_stor_dbg(us, "operation failed\n");
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+
+ /*
+ * The device might not have as much data available as we
+ * requested. If you ask for more than the device has, this reads
+ * and such will hang.
+ */
+ usb_stor_dbg(us, "Device indicates that it has %d bytes available\n",
+ le16_to_cpu(fst->Count));
+ usb_stor_dbg(us, "SCSI requested %d\n", scsi_bufflen(srb));
+
+ /* Find the length we desire to read. */
+ switch (srb->cmnd[0]) {
+ case INQUIRY:
+ case REQUEST_SENSE: /* 16 or 18 bytes? spec says 18, lots of devices only have 16 */
+ case MODE_SENSE:
+ case MODE_SENSE_10:
+ length = le16_to_cpu(fst->Count);
+ break;
+ default:
+ length = scsi_bufflen(srb);
+ }
+
+ /* verify that this amount is legal */
+ if (length > scsi_bufflen(srb)) {
+ length = scsi_bufflen(srb);
+ usb_stor_dbg(us, "Truncating request to match buffer length: %d\n",
+ length);
+ }
+
+ /*
+ * What we do now depends on what direction the data is supposed to
+ * move in.
+ */
+
+ switch (us->srb->sc_data_direction) {
+ case DMA_FROM_DEVICE:
+ /* catch bogus "read 0 length" case */
+ if (!length)
+ break;
+ /*
+ * Make sure that the status indicates that the device
+ * wants data as well.
+ */
+ if ((fst->Status & DRQ_STAT) == 0 || (fst->Reason & 3) != 2) {
+ usb_stor_dbg(us, "SCSI wants data, drive doesn't have any\n");
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+ result = freecom_readdata (srb, us, ipipe, opipe, length);
+ if (result != USB_STOR_TRANSPORT_GOOD)
+ return result;
+
+ usb_stor_dbg(us, "Waiting for status\n");
+ result = usb_stor_bulk_transfer_buf (us, ipipe, fst,
+ FCM_PACKET_LENGTH, &partial);
+ US_DEBUG(pdump(us, (void *)fst, partial));
+
+ if (partial != 4 || result > USB_STOR_XFER_SHORT)
+ return USB_STOR_TRANSPORT_ERROR;
+ if ((fst->Status & ERR_STAT) != 0) {
+ usb_stor_dbg(us, "operation failed\n");
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+ if ((fst->Reason & 3) != 3) {
+ usb_stor_dbg(us, "Drive seems still hungry\n");
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+ usb_stor_dbg(us, "Transfer happy\n");
+ break;
+
+ case DMA_TO_DEVICE:
+ /* catch bogus "write 0 length" case */
+ if (!length)
+ break;
+ /*
+ * Make sure the status indicates that the device wants to
+ * send us data.
+ */
+ /* !!IMPLEMENT!! */
+ result = freecom_writedata (srb, us, ipipe, opipe, length);
+ if (result != USB_STOR_TRANSPORT_GOOD)
+ return result;
+
+ usb_stor_dbg(us, "Waiting for status\n");
+ result = usb_stor_bulk_transfer_buf (us, ipipe, fst,
+ FCM_PACKET_LENGTH, &partial);
+
+ if (partial != 4 || result > USB_STOR_XFER_SHORT)
+ return USB_STOR_TRANSPORT_ERROR;
+ if ((fst->Status & ERR_STAT) != 0) {
+ usb_stor_dbg(us, "operation failed\n");
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+ if ((fst->Reason & 3) != 3) {
+ usb_stor_dbg(us, "Drive seems still hungry\n");
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+
+ usb_stor_dbg(us, "Transfer happy\n");
+ break;
+
+
+ case DMA_NONE:
+ /* Easy, do nothing. */
+ break;
+
+ default:
+ /* should never hit here -- filtered in usb.c */
+ usb_stor_dbg(us, "freecom unimplemented direction: %d\n",
+ us->srb->sc_data_direction);
+ /* Return fail, SCSI seems to handle this better. */
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int init_freecom(struct us_data *us)
+{
+ int result;
+ char *buffer = us->iobuf;
+
+ /*
+ * The DMA-mapped I/O buffer is 64 bytes long, just right for
+ * all our packets. No need to allocate any extra buffer space.
+ */
+
+ result = usb_stor_control_msg(us, us->recv_ctrl_pipe,
+ 0x4c, 0xc0, 0x4346, 0x0, buffer, 0x20, 3*HZ);
+ buffer[32] = '\0';
+ usb_stor_dbg(us, "String returned from FC init is: %s\n", buffer);
+
+ /*
+ * Special thanks to the people at Freecom for providing me with
+ * this "magic sequence", which they use in their Windows and MacOS
+ * drivers to make sure that all the attached perhiperals are
+ * properly reset.
+ */
+
+ /* send reset */
+ result = usb_stor_control_msg(us, us->send_ctrl_pipe,
+ 0x4d, 0x40, 0x24d8, 0x0, NULL, 0x0, 3*HZ);
+ usb_stor_dbg(us, "result from activate reset is %d\n", result);
+
+ /* wait 250ms */
+ msleep(250);
+
+ /* clear reset */
+ result = usb_stor_control_msg(us, us->send_ctrl_pipe,
+ 0x4d, 0x40, 0x24f8, 0x0, NULL, 0x0, 3*HZ);
+ usb_stor_dbg(us, "result from clear reset is %d\n", result);
+
+ /* wait 3 seconds */
+ msleep(3 * 1000);
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int usb_stor_freecom_reset(struct us_data *us)
+{
+ printk (KERN_CRIT "freecom reset called\n");
+
+ /* We don't really have this feature. */
+ return FAILED;
+}
+
+#ifdef CONFIG_USB_STORAGE_DEBUG
+static void pdump(struct us_data *us, void *ibuffer, int length)
+{
+ static char line[80];
+ int offset = 0;
+ unsigned char *buffer = (unsigned char *) ibuffer;
+ int i, j;
+ int from, base;
+
+ offset = 0;
+ for (i = 0; i < length; i++) {
+ if ((i & 15) == 0) {
+ if (i > 0) {
+ offset += sprintf (line+offset, " - ");
+ for (j = i - 16; j < i; j++) {
+ if (buffer[j] >= 32 && buffer[j] <= 126)
+ line[offset++] = buffer[j];
+ else
+ line[offset++] = '.';
+ }
+ line[offset] = 0;
+ usb_stor_dbg(us, "%s\n", line);
+ offset = 0;
+ }
+ offset += sprintf (line+offset, "%08x:", i);
+ } else if ((i & 7) == 0) {
+ offset += sprintf (line+offset, " -");
+ }
+ offset += sprintf (line+offset, " %02x", buffer[i] & 0xff);
+ }
+
+ /* Add the last "chunk" of data. */
+ from = (length - 1) % 16;
+ base = ((length - 1) / 16) * 16;
+
+ for (i = from + 1; i < 16; i++)
+ offset += sprintf (line+offset, " ");
+ if (from < 8)
+ offset += sprintf (line+offset, " ");
+ offset += sprintf (line+offset, " - ");
+
+ for (i = 0; i <= from; i++) {
+ if (buffer[base+i] >= 32 && buffer[base+i] <= 126)
+ line[offset++] = buffer[base+i];
+ else
+ line[offset++] = '.';
+ }
+ line[offset] = 0;
+ usb_stor_dbg(us, "%s\n", line);
+ offset = 0;
+}
+#endif
+
+static struct scsi_host_template freecom_host_template;
+
+static int freecom_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct us_data *us;
+ int result;
+
+ result = usb_stor_probe1(&us, intf, id,
+ (id - freecom_usb_ids) + freecom_unusual_dev_list,
+ &freecom_host_template);
+ if (result)
+ return result;
+
+ us->transport_name = "Freecom";
+ us->transport = freecom_transport;
+ us->transport_reset = usb_stor_freecom_reset;
+ us->max_lun = 0;
+
+ result = usb_stor_probe2(us);
+ return result;
+}
+
+static struct usb_driver freecom_driver = {
+ .name = DRV_NAME,
+ .probe = freecom_probe,
+ .disconnect = usb_stor_disconnect,
+ .suspend = usb_stor_suspend,
+ .resume = usb_stor_resume,
+ .reset_resume = usb_stor_reset_resume,
+ .pre_reset = usb_stor_pre_reset,
+ .post_reset = usb_stor_post_reset,
+ .id_table = freecom_usb_ids,
+ .soft_unbind = 1,
+ .no_dynamic_id = 1,
+};
+
+module_usb_stor_driver(freecom_driver, freecom_host_template, DRV_NAME);
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-05 06:22:49 +0000