summaryrefslogtreecommitdiffstats
path: root/drivers/video/backlight/cr_bllcd.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/video/backlight/cr_bllcd.c')
-rw-r--r--drivers/video/backlight/cr_bllcd.c266
1 files changed, 266 insertions, 0 deletions
diff --git a/drivers/video/backlight/cr_bllcd.c b/drivers/video/backlight/cr_bllcd.c
new file mode 100644
index 000000000..4ad0a7253
--- /dev/null
+++ b/drivers/video/backlight/cr_bllcd.c
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) Intel Corp. 2007.
+ * All Rights Reserved.
+ *
+ * Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to
+ * develop this driver.
+ *
+ * This file is part of the Carillo Ranch video subsystem driver.
+ *
+ * Authors:
+ * Thomas Hellstrom <thomas-at-tungstengraphics-dot-com>
+ * Alan Hourihane <alanh-at-tungstengraphics-dot-com>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+#include <linux/lcd.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+
+/* The LVDS- and panel power controls sits on the
+ * GPIO port of the ISA bridge.
+ */
+
+#define CRVML_DEVICE_LPC 0x27B8
+#define CRVML_REG_GPIOBAR 0x48
+#define CRVML_REG_GPIOEN 0x4C
+#define CRVML_GPIOEN_BIT (1 << 4)
+#define CRVML_PANEL_PORT 0x38
+#define CRVML_LVDS_ON 0x00000001
+#define CRVML_PANEL_ON 0x00000002
+#define CRVML_BACKLIGHT_OFF 0x00000004
+
+/* The PLL Clock register sits on Host bridge */
+#define CRVML_DEVICE_MCH 0x5001
+#define CRVML_REG_MCHBAR 0x44
+#define CRVML_REG_MCHEN 0x54
+#define CRVML_MCHEN_BIT (1 << 28)
+#define CRVML_MCHMAP_SIZE 4096
+#define CRVML_REG_CLOCK 0xc3c
+#define CRVML_CLOCK_SHIFT 8
+#define CRVML_CLOCK_MASK 0x00000f00
+
+static struct pci_dev *lpc_dev;
+static u32 gpio_bar;
+
+struct cr_panel {
+ struct backlight_device *cr_backlight_device;
+ struct lcd_device *cr_lcd_device;
+};
+
+static int cr_backlight_set_intensity(struct backlight_device *bd)
+{
+ u32 addr = gpio_bar + CRVML_PANEL_PORT;
+ u32 cur = inl(addr);
+
+ if (backlight_get_brightness(bd) == 0) {
+ /* OFF */
+ cur |= CRVML_BACKLIGHT_OFF;
+ outl(cur, addr);
+ } else {
+ /* FULL ON */
+ cur &= ~CRVML_BACKLIGHT_OFF;
+ outl(cur, addr);
+ }
+
+ return 0;
+}
+
+static int cr_backlight_get_intensity(struct backlight_device *bd)
+{
+ u32 addr = gpio_bar + CRVML_PANEL_PORT;
+ u32 cur = inl(addr);
+ u8 intensity;
+
+ if (cur & CRVML_BACKLIGHT_OFF)
+ intensity = 0;
+ else
+ intensity = 1;
+
+ return intensity;
+}
+
+static const struct backlight_ops cr_backlight_ops = {
+ .get_brightness = cr_backlight_get_intensity,
+ .update_status = cr_backlight_set_intensity,
+};
+
+static void cr_panel_on(void)
+{
+ u32 addr = gpio_bar + CRVML_PANEL_PORT;
+ u32 cur = inl(addr);
+
+ if (!(cur & CRVML_PANEL_ON)) {
+ /* Make sure LVDS controller is down. */
+ if (cur & 0x00000001) {
+ cur &= ~CRVML_LVDS_ON;
+ outl(cur, addr);
+ }
+ /* Power up Panel */
+ schedule_timeout(HZ / 10);
+ cur |= CRVML_PANEL_ON;
+ outl(cur, addr);
+ }
+
+ /* Power up LVDS controller */
+
+ if (!(cur & CRVML_LVDS_ON)) {
+ schedule_timeout(HZ / 10);
+ outl(cur | CRVML_LVDS_ON, addr);
+ }
+}
+
+static void cr_panel_off(void)
+{
+ u32 addr = gpio_bar + CRVML_PANEL_PORT;
+ u32 cur = inl(addr);
+
+ /* Power down LVDS controller first to avoid high currents */
+ if (cur & CRVML_LVDS_ON) {
+ cur &= ~CRVML_LVDS_ON;
+ outl(cur, addr);
+ }
+ if (cur & CRVML_PANEL_ON) {
+ schedule_timeout(HZ / 10);
+ outl(cur & ~CRVML_PANEL_ON, addr);
+ }
+}
+
+static int cr_lcd_set_power(struct lcd_device *ld, int power)
+{
+ if (power == FB_BLANK_UNBLANK)
+ cr_panel_on();
+ if (power == FB_BLANK_POWERDOWN)
+ cr_panel_off();
+
+ return 0;
+}
+
+static struct lcd_ops cr_lcd_ops = {
+ .set_power = cr_lcd_set_power,
+};
+
+static int cr_backlight_probe(struct platform_device *pdev)
+{
+ struct backlight_properties props;
+ struct backlight_device *bdp;
+ struct lcd_device *ldp;
+ struct cr_panel *crp;
+ u8 dev_en;
+
+ lpc_dev = pci_get_device(PCI_VENDOR_ID_INTEL,
+ CRVML_DEVICE_LPC, NULL);
+ if (!lpc_dev) {
+ pr_err("INTEL CARILLO RANCH LPC not found.\n");
+ return -ENODEV;
+ }
+
+ pci_read_config_byte(lpc_dev, CRVML_REG_GPIOEN, &dev_en);
+ if (!(dev_en & CRVML_GPIOEN_BIT)) {
+ pr_err("Carillo Ranch GPIO device was not enabled.\n");
+ pci_dev_put(lpc_dev);
+ return -ENODEV;
+ }
+
+ memset(&props, 0, sizeof(struct backlight_properties));
+ props.type = BACKLIGHT_RAW;
+ bdp = devm_backlight_device_register(&pdev->dev, "cr-backlight",
+ &pdev->dev, NULL, &cr_backlight_ops,
+ &props);
+ if (IS_ERR(bdp)) {
+ pci_dev_put(lpc_dev);
+ return PTR_ERR(bdp);
+ }
+
+ ldp = devm_lcd_device_register(&pdev->dev, "cr-lcd", &pdev->dev, NULL,
+ &cr_lcd_ops);
+ if (IS_ERR(ldp)) {
+ pci_dev_put(lpc_dev);
+ return PTR_ERR(ldp);
+ }
+
+ pci_read_config_dword(lpc_dev, CRVML_REG_GPIOBAR,
+ &gpio_bar);
+ gpio_bar &= ~0x3F;
+
+ crp = devm_kzalloc(&pdev->dev, sizeof(*crp), GFP_KERNEL);
+ if (!crp) {
+ pci_dev_put(lpc_dev);
+ return -ENOMEM;
+ }
+
+ crp->cr_backlight_device = bdp;
+ crp->cr_lcd_device = ldp;
+ crp->cr_backlight_device->props.power = FB_BLANK_UNBLANK;
+ crp->cr_backlight_device->props.brightness = 0;
+ cr_backlight_set_intensity(crp->cr_backlight_device);
+ cr_lcd_set_power(crp->cr_lcd_device, FB_BLANK_UNBLANK);
+
+ platform_set_drvdata(pdev, crp);
+
+ return 0;
+}
+
+static int cr_backlight_remove(struct platform_device *pdev)
+{
+ struct cr_panel *crp = platform_get_drvdata(pdev);
+
+ crp->cr_backlight_device->props.power = FB_BLANK_POWERDOWN;
+ crp->cr_backlight_device->props.brightness = 0;
+ crp->cr_backlight_device->props.max_brightness = 0;
+ cr_backlight_set_intensity(crp->cr_backlight_device);
+ cr_lcd_set_power(crp->cr_lcd_device, FB_BLANK_POWERDOWN);
+ pci_dev_put(lpc_dev);
+
+ return 0;
+}
+
+static struct platform_driver cr_backlight_driver = {
+ .probe = cr_backlight_probe,
+ .remove = cr_backlight_remove,
+ .driver = {
+ .name = "cr_backlight",
+ },
+};
+
+static struct platform_device *crp;
+
+static int __init cr_backlight_init(void)
+{
+ int ret = platform_driver_register(&cr_backlight_driver);
+
+ if (ret)
+ return ret;
+
+ crp = platform_device_register_simple("cr_backlight", -1, NULL, 0);
+ if (IS_ERR(crp)) {
+ platform_driver_unregister(&cr_backlight_driver);
+ return PTR_ERR(crp);
+ }
+
+ pr_info("Carillo Ranch Backlight Driver Initialized.\n");
+
+ return 0;
+}
+
+static void __exit cr_backlight_exit(void)
+{
+ platform_device_unregister(crp);
+ platform_driver_unregister(&cr_backlight_driver);
+}
+
+module_init(cr_backlight_init);
+module_exit(cr_backlight_exit);
+
+MODULE_AUTHOR("Tungsten Graphics Inc.");
+MODULE_DESCRIPTION("Carillo Ranch Backlight Driver");
+MODULE_LICENSE("GPL");