1 files changed, 100 insertions, 0 deletions
diff --git a/samples/pktgen/pktgen_sample01_simple.sh b/samples/pktgen/pktgen_sample01_simple.sh
new file mode 100755
index 000000000..09a92ea96
--- /dev/null
+++ b/samples/pktgen/pktgen_sample01_simple.sh
@@ -0,0 +1,100 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Simple example:
+#  * pktgen sending with single thread and single interface
+#  * flow variation via random UDP source port
+#
+basedir=`dirname $0`
+source ${basedir}/functions.sh
+root_check_run_with_sudo "$@"
+
+# Parameter parsing via include
+# - go look in parameters.sh to see which setting are avail
+# - required param is the interface "-i" stored in $DEV
+source ${basedir}/parameters.sh
+#
+# Set some default params, if they didn't get set
+if [ -z "$DEST_IP" ]; then
+    [ -z "$IP6" ] && DEST_IP="198.18.0.42" || DEST_IP="FD00::1"
+fi
+[ -z "$CLONE_SKB" ] && CLONE_SKB="0"
+# Example enforce param "-m" for dst_mac
+[ -z "$DST_MAC" ] && usage && err 2 "Must specify -m dst_mac"
+[ -z "$COUNT" ]   && COUNT="100000" # Zero means indefinitely
+if [ -n "$DEST_IP" ]; then
+    validate_addr${IP6} $DEST_IP
+    read -r DST_MIN DST_MAX <<< $(parse_addr${IP6} $DEST_IP)
+fi
+if [ -n "$DST_PORT" ]; then
+    read -r UDP_DST_MIN UDP_DST_MAX <<< $(parse_ports $DST_PORT)
+    validate_ports $UDP_DST_MIN $UDP_DST_MAX
+fi
+
+# Flow variation random source port between min and max
+UDP_SRC_MIN=9
+UDP_SRC_MAX=109
+
+# General cleanup everything since last run
+# (especially important if other threads were configured by other scripts)
+[ -z "$APPEND" ] && pg_ctrl "reset"
+
+# Add remove all other devices and add_device $DEV to thread 0
+thread=0
+[ -z "$APPEND" ] && pg_thread $thread "rem_device_all"
+pg_thread $thread "add_device" $DEV
+
+# How many packets to send (zero means indefinitely)
+pg_set $DEV "count $COUNT"
+
+# Reduce alloc cost by sending same SKB many times
+# - this obviously affects the randomness within the packet
+pg_set $DEV "clone_skb $CLONE_SKB"
+
+# Set packet size
+pg_set $DEV "pkt_size $PKT_SIZE"
+
+# Delay between packets (zero means max speed)
+pg_set $DEV "delay $DELAY"
+
+# Flag example disabling timestamping
+pg_set $DEV "flag NO_TIMESTAMP"
+
+# Destination
+pg_set $DEV "dst_mac $DST_MAC"
+pg_set $DEV "dst${IP6}_min $DST_MIN"
+pg_set $DEV "dst${IP6}_max $DST_MAX"
+
+if [ -n "$DST_PORT" ]; then
+    # Single destination port or random port range
+    pg_set $DEV "flag UDPDST_RND"
+    pg_set $DEV "udp_dst_min $UDP_DST_MIN"
+    pg_set $DEV "udp_dst_max $UDP_DST_MAX"
+fi
+
+[ ! -z "$UDP_CSUM" ] && pg_set $dev "flag UDPCSUM"
+
+# Setup random UDP port src range
+pg_set $DEV "flag UDPSRC_RND"
+pg_set $DEV "udp_src_min $UDP_SRC_MIN"
+pg_set $DEV "udp_src_max $UDP_SRC_MAX"
+
+# Run if user hits control-c
+function print_result() {
+    # Print results
+    echo "Result device: $DEV"
+    cat /proc/net/pktgen/$DEV
+}
+# trap keyboard interrupt (Ctrl-C)
+trap true SIGINT
+
+if [ -z "$APPEND" ]; then
+    # start_run
+    echo "Running... ctrl^C to stop" >&2
+    pg_ctrl "start"
+    echo "Done" >&2
+
+    print_result
+else
+    echo "Append mode: config done. Do more or use 'pg_ctrl start' to run"
+fi
+\ No newline at end of file