From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- .../admin-guide/device-mapper/dm-zoned.rst | 194 +++++++++++++++++++++ 1 file changed, 194 insertions(+) create mode 100644 Documentation/admin-guide/device-mapper/dm-zoned.rst (limited to 'Documentation/admin-guide/device-mapper/dm-zoned.rst') diff --git a/Documentation/admin-guide/device-mapper/dm-zoned.rst b/Documentation/admin-guide/device-mapper/dm-zoned.rst new file mode 100644 index 000000000..0fac051ca --- /dev/null +++ b/Documentation/admin-guide/device-mapper/dm-zoned.rst @@ -0,0 +1,194 @@ +======== +dm-zoned +======== + +The dm-zoned device mapper target exposes a zoned block device (ZBC and +ZAC compliant devices) as a regular block device without any write +pattern constraints. In effect, it implements a drive-managed zoned +block device which hides from the user (a file system or an application +doing raw block device accesses) the sequential write constraints of +host-managed zoned block devices and can mitigate the potential +device-side performance degradation due to excessive random writes on +host-aware zoned block devices. + +For a more detailed description of the zoned block device models and +their constraints see (for SCSI devices): + +https://www.t10.org/drafts.htm#ZBC_Family + +and (for ATA devices): + +http://www.t13.org/Documents/UploadedDocuments/docs2015/di537r05-Zoned_Device_ATA_Command_Set_ZAC.pdf + +The dm-zoned implementation is simple and minimizes system overhead (CPU +and memory usage as well as storage capacity loss). For a 10TB +host-managed disk with 256 MB zones, dm-zoned memory usage per disk +instance is at most 4.5 MB and as little as 5 zones will be used +internally for storing metadata and performing reclaim operations. + +dm-zoned target devices are formatted and checked using the dmzadm +utility available at: + +https://github.com/hgst/dm-zoned-tools + +Algorithm +========= + +dm-zoned implements an on-disk buffering scheme to handle non-sequential +write accesses to the sequential zones of a zoned block device. +Conventional zones are used for caching as well as for storing internal +metadata. It can also use a regular block device together with the zoned +block device; in that case the regular block device will be split logically +in zones with the same size as the zoned block device. These zones will be +placed in front of the zones from the zoned block device and will be handled +just like conventional zones. + +The zones of the device(s) are separated into 2 types: + +1) Metadata zones: these are conventional zones used to store metadata. +Metadata zones are not reported as useable capacity to the user. + +2) Data zones: all remaining zones, the vast majority of which will be +sequential zones used exclusively to store user data. The conventional +zones of the device may be used also for buffering user random writes. +Data in these zones may be directly mapped to the conventional zone, but +later moved to a sequential zone so that the conventional zone can be +reused for buffering incoming random writes. + +dm-zoned exposes a logical device with a sector size of 4096 bytes, +irrespective of the physical sector size of the backend zoned block +device being used. This allows reducing the amount of metadata needed to +manage valid blocks (blocks written). + +The on-disk metadata format is as follows: + +1) The first block of the first conventional zone found contains the +super block which describes the on disk amount and position of metadata +blocks. + +2) Following the super block, a set of blocks is used to describe the +mapping of the logical device blocks. The mapping is done per chunk of +blocks, with the chunk size equal to the zoned block device size. The +mapping table is indexed by chunk number and each mapping entry +indicates the zone number of the device storing the chunk of data. Each +mapping entry may also indicate if the zone number of a conventional +zone used to buffer random modification to the data zone. + +3) A set of blocks used to store bitmaps indicating the validity of +blocks in the data zones follows the mapping table. A valid block is +defined as a block that was written and not discarded. For a buffered +data chunk, a block is always valid only in the data zone mapping the +chunk or in the buffer zone of the chunk. + +For a logical chunk mapped to a conventional zone, all write operations +are processed by directly writing to the zone. If the mapping zone is a +sequential zone, the write operation is processed directly only if the +write offset within the logical chunk is equal to the write pointer +offset within of the sequential data zone (i.e. the write operation is +aligned on the zone write pointer). Otherwise, write operations are +processed indirectly using a buffer zone. In that case, an unused +conventional zone is allocated and assigned to the chunk being +accessed. Writing a block to the buffer zone of a chunk will +automatically invalidate the same block in the sequential zone mapping +the chunk. If all blocks of the sequential zone become invalid, the zone +is freed and the chunk buffer zone becomes the primary zone mapping the +chunk, resulting in native random write performance similar to a regular +block device. + +Read operations are processed according to the block validity +information provided by the bitmaps. Valid blocks are read either from +the sequential zone mapping a chunk, or if the chunk is buffered, from +the buffer zone assigned. If the accessed chunk has no mapping, or the +accessed blocks are invalid, the read buffer is zeroed and the read +operation terminated. + +After some time, the limited number of conventional zones available may +be exhausted (all used to map chunks or buffer sequential zones) and +unaligned writes to unbuffered chunks become impossible. To avoid this +situation, a reclaim process regularly scans used conventional zones and +tries to reclaim the least recently used zones by copying the valid +blocks of the buffer zone to a free sequential zone. Once the copy +completes, the chunk mapping is updated to point to the sequential zone +and the buffer zone freed for reuse. + +Metadata Protection +=================== + +To protect metadata against corruption in case of sudden power loss or +system crash, 2 sets of metadata zones are used. One set, the primary +set, is used as the main metadata region, while the secondary set is +used as a staging area. Modified metadata is first written to the +secondary set and validated by updating the super block in the secondary +set, a generation counter is used to indicate that this set contains the +newest metadata. Once this operation completes, in place of metadata +block updates can be done in the primary metadata set. This ensures that +one of the set is always consistent (all modifications committed or none +at all). Flush operations are used as a commit point. Upon reception of +a flush request, metadata modification activity is temporarily blocked +(for both incoming BIO processing and reclaim process) and all dirty +metadata blocks are staged and updated. Normal operation is then +resumed. Flushing metadata thus only temporarily delays write and +discard requests. Read requests can be processed concurrently while +metadata flush is being executed. + +If a regular device is used in conjunction with the zoned block device, +a third set of metadata (without the zone bitmaps) is written to the +start of the zoned block device. This metadata has a generation counter of +'0' and will never be updated during normal operation; it just serves for +identification purposes. The first and second copy of the metadata +are located at the start of the regular block device. + +Usage +===== + +A zoned block device must first be formatted using the dmzadm tool. This +will analyze the device zone configuration, determine where to place the +metadata sets on the device and initialize the metadata sets. + +Ex:: + + dmzadm --format /dev/sdxx + + +If two drives are to be used, both devices must be specified, with the +regular block device as the first device. + +Ex:: + + dmzadm --format /dev/sdxx /dev/sdyy + + +Formatted device(s) can be started with the dmzadm utility, too.: + +Ex:: + + dmzadm --start /dev/sdxx /dev/sdyy + + +Information about the internal layout and current usage of the zones can +be obtained with the 'status' callback from dmsetup: + +Ex:: + + dmsetup status /dev/dm-X + +will return a line + + 0 zoned zones / random / sequential + +where is the total number of zones, is the number +of unmapped (ie free) random zones, the total number of zones, + the number of unmapped sequential zones, and the +total number of sequential zones. + +Normally the reclaim process will be started once there are less than 50 +percent free random zones. In order to start the reclaim process manually +even before reaching this threshold the 'dmsetup message' function can be +used: + +Ex:: + + dmsetup message /dev/dm-X 0 reclaim + +will start the reclaim process and random zones will be moved to sequential +zones. -- cgit v1.2.3