From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- .../admin-guide/hw-vuln/core-scheduling.rst | 226 ++++++ .../admin-guide/hw-vuln/cross-thread-rsb.rst | 92 +++ .../admin-guide/hw-vuln/gather_data_sampling.rst | 109 +++ Documentation/admin-guide/hw-vuln/index.rst | 23 + Documentation/admin-guide/hw-vuln/l1d_flush.rst | 69 ++ Documentation/admin-guide/hw-vuln/l1tf.rst | 615 +++++++++++++++++ Documentation/admin-guide/hw-vuln/mds.rst | 311 +++++++++ Documentation/admin-guide/hw-vuln/multihit.rst | 167 +++++ .../hw-vuln/processor_mmio_stale_data.rst | 260 +++++++ .../special-register-buffer-data-sampling.rst | 150 ++++ Documentation/admin-guide/hw-vuln/spectre.rst | 756 +++++++++++++++++++++ Documentation/admin-guide/hw-vuln/srso.rst | 133 ++++ .../admin-guide/hw-vuln/tsx_async_abort.rst | 277 ++++++++ 13 files changed, 3188 insertions(+) create mode 100644 Documentation/admin-guide/hw-vuln/core-scheduling.rst create mode 100644 Documentation/admin-guide/hw-vuln/cross-thread-rsb.rst create mode 100644 Documentation/admin-guide/hw-vuln/gather_data_sampling.rst create mode 100644 Documentation/admin-guide/hw-vuln/index.rst create mode 100644 Documentation/admin-guide/hw-vuln/l1d_flush.rst create mode 100644 Documentation/admin-guide/hw-vuln/l1tf.rst create mode 100644 Documentation/admin-guide/hw-vuln/mds.rst create mode 100644 Documentation/admin-guide/hw-vuln/multihit.rst create mode 100644 Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst create mode 100644 Documentation/admin-guide/hw-vuln/special-register-buffer-data-sampling.rst create mode 100644 Documentation/admin-guide/hw-vuln/spectre.rst create mode 100644 Documentation/admin-guide/hw-vuln/srso.rst create mode 100644 Documentation/admin-guide/hw-vuln/tsx_async_abort.rst (limited to 'Documentation/admin-guide/hw-vuln') diff --git a/Documentation/admin-guide/hw-vuln/core-scheduling.rst b/Documentation/admin-guide/hw-vuln/core-scheduling.rst new file mode 100644 index 000000000..cf1eeefdf --- /dev/null +++ b/Documentation/admin-guide/hw-vuln/core-scheduling.rst @@ -0,0 +1,226 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=============== +Core Scheduling +=============== +Core scheduling support allows userspace to define groups of tasks that can +share a core. These groups can be specified either for security usecases (one +group of tasks don't trust another), or for performance usecases (some +workloads may benefit from running on the same core as they don't need the same +hardware resources of the shared core, or may prefer different cores if they +do share hardware resource needs). This document only describes the security +usecase. + +Security usecase +---------------- +A cross-HT attack involves the attacker and victim running on different Hyper +Threads of the same core. MDS and L1TF are examples of such attacks. The only +full mitigation of cross-HT attacks is to disable Hyper Threading (HT). Core +scheduling is a scheduler feature that can mitigate some (not all) cross-HT +attacks. It allows HT to be turned on safely by ensuring that only tasks in a +user-designated trusted group can share a core. This increase in core sharing +can also improve performance, however it is not guaranteed that performance +will always improve, though that is seen to be the case with a number of real +world workloads. In theory, core scheduling aims to perform at least as good as +when Hyper Threading is disabled. In practice, this is mostly the case though +not always: as synchronizing scheduling decisions across 2 or more CPUs in a +core involves additional overhead - especially when the system is lightly +loaded. When ``total_threads <= N_CPUS/2``, the extra overhead may cause core +scheduling to perform more poorly compared to SMT-disabled, where N_CPUS is the +total number of CPUs. Please measure the performance of your workloads always. + +Usage +----- +Core scheduling support is enabled via the ``CONFIG_SCHED_CORE`` config option. +Using this feature, userspace defines groups of tasks that can be co-scheduled +on the same core. The core scheduler uses this information to make sure that +tasks that are not in the same group never run simultaneously on a core, while +doing its best to satisfy the system's scheduling requirements. + +Core scheduling can be enabled via the ``PR_SCHED_CORE`` prctl interface. +This interface provides support for the creation of core scheduling groups, as +well as admission and removal of tasks from created groups:: + + #include + + int prctl(int option, unsigned long arg2, unsigned long arg3, + unsigned long arg4, unsigned long arg5); + +option: + ``PR_SCHED_CORE`` + +arg2: + Command for operation, must be one off: + + - ``PR_SCHED_CORE_GET`` -- get core_sched cookie of ``pid``. + - ``PR_SCHED_CORE_CREATE`` -- create a new unique cookie for ``pid``. + - ``PR_SCHED_CORE_SHARE_TO`` -- push core_sched cookie to ``pid``. + - ``PR_SCHED_CORE_SHARE_FROM`` -- pull core_sched cookie from ``pid``. + +arg3: + ``pid`` of the task for which the operation applies. + +arg4: + ``pid_type`` for which the operation applies. It is one of + ``PR_SCHED_CORE_SCOPE_``-prefixed macro constants. For example, if arg4 + is ``PR_SCHED_CORE_SCOPE_THREAD_GROUP``, then the operation of this command + will be performed for all tasks in the task group of ``pid``. + +arg5: + userspace pointer to an unsigned long for storing the cookie returned by + ``PR_SCHED_CORE_GET`` command. Should be 0 for all other commands. + +In order for a process to push a cookie to, or pull a cookie from a process, it +is required to have the ptrace access mode: `PTRACE_MODE_READ_REALCREDS` to the +process. + +Building hierarchies of tasks +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The simplest way to build hierarchies of threads/processes which share a +cookie and thus a core is to rely on the fact that the core-sched cookie is +inherited across forks/clones and execs, thus setting a cookie for the +'initial' script/executable/daemon will place every spawned child in the +same core-sched group. + +Cookie Transferral +~~~~~~~~~~~~~~~~~~ +Transferring a cookie between the current and other tasks is possible using +PR_SCHED_CORE_SHARE_FROM and PR_SCHED_CORE_SHARE_TO to inherit a cookie from a +specified task or a share a cookie with a task. In combination this allows a +simple helper program to pull a cookie from a task in an existing core +scheduling group and share it with already running tasks. + +Design/Implementation +--------------------- +Each task that is tagged is assigned a cookie internally in the kernel. As +mentioned in `Usage`_, tasks with the same cookie value are assumed to trust +each other and share a core. + +The basic idea is that, every schedule event tries to select tasks for all the +siblings of a core such that all the selected tasks running on a core are +trusted (same cookie) at any point in time. Kernel threads are assumed trusted. +The idle task is considered special, as it trusts everything and everything +trusts it. + +During a schedule() event on any sibling of a core, the highest priority task on +the sibling's core is picked and assigned to the sibling calling schedule(), if +the sibling has the task enqueued. For rest of the siblings in the core, +highest priority task with the same cookie is selected if there is one runnable +in their individual run queues. If a task with same cookie is not available, +the idle task is selected. Idle task is globally trusted. + +Once a task has been selected for all the siblings in the core, an IPI is sent to +siblings for whom a new task was selected. Siblings on receiving the IPI will +switch to the new task immediately. If an idle task is selected for a sibling, +then the sibling is considered to be in a `forced idle` state. I.e., it may +have tasks on its on runqueue to run, however it will still have to run idle. +More on this in the next section. + +Forced-idling of hyperthreads +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The scheduler tries its best to find tasks that trust each other such that all +tasks selected to be scheduled are of the highest priority in a core. However, +it is possible that some runqueues had tasks that were incompatible with the +highest priority ones in the core. Favoring security over fairness, one or more +siblings could be forced to select a lower priority task if the highest +priority task is not trusted with respect to the core wide highest priority +task. If a sibling does not have a trusted task to run, it will be forced idle +by the scheduler (idle thread is scheduled to run). + +When the highest priority task is selected to run, a reschedule-IPI is sent to +the sibling to force it into idle. This results in 4 cases which need to be +considered depending on whether a VM or a regular usermode process was running +on either HT:: + + HT1 (attack) HT2 (victim) + A idle -> user space user space -> idle + B idle -> user space guest -> idle + C idle -> guest user space -> idle + D idle -> guest guest -> idle + +Note that for better performance, we do not wait for the destination CPU +(victim) to enter idle mode. This is because the sending of the IPI would bring +the destination CPU immediately into kernel mode from user space, or VMEXIT +in the case of guests. At best, this would only leak some scheduler metadata +which may not be worth protecting. It is also possible that the IPI is received +too late on some architectures, but this has not been observed in the case of +x86. + +Trust model +~~~~~~~~~~~ +Core scheduling maintains trust relationships amongst groups of tasks by +assigning them a tag that is the same cookie value. +When a system with core scheduling boots, all tasks are considered to trust +each other. This is because the core scheduler does not have information about +trust relationships until userspace uses the above mentioned interfaces, to +communicate them. In other words, all tasks have a default cookie value of 0. +and are considered system-wide trusted. The forced-idling of siblings running +cookie-0 tasks is also avoided. + +Once userspace uses the above mentioned interfaces to group sets of tasks, tasks +within such groups are considered to trust each other, but do not trust those +outside. Tasks outside the group also don't trust tasks within. + +Limitations of core-scheduling +------------------------------ +Core scheduling tries to guarantee that only trusted tasks run concurrently on a +core. But there could be small window of time during which untrusted tasks run +concurrently or kernel could be running concurrently with a task not trusted by +kernel. + +IPI processing delays +~~~~~~~~~~~~~~~~~~~~~ +Core scheduling selects only trusted tasks to run together. IPI is used to notify +the siblings to switch to the new task. But there could be hardware delays in +receiving of the IPI on some arch (on x86, this has not been observed). This may +cause an attacker task to start running on a CPU before its siblings receive the +IPI. Even though cache is flushed on entry to user mode, victim tasks on siblings +may populate data in the cache and micro architectural buffers after the attacker +starts to run and this is a possibility for data leak. + +Open cross-HT issues that core scheduling does not solve +-------------------------------------------------------- +1. For MDS +~~~~~~~~~~ +Core scheduling cannot protect against MDS attacks between the siblings +running in user mode and the others running in kernel mode. Even though all +siblings run tasks which trust each other, when the kernel is executing +code on behalf of a task, it cannot trust the code running in the +sibling. Such attacks are possible for any combination of sibling CPU modes +(host or guest mode). + +2. For L1TF +~~~~~~~~~~~ +Core scheduling cannot protect against an L1TF guest attacker exploiting a +guest or host victim. This is because the guest attacker can craft invalid +PTEs which are not inverted due to a vulnerable guest kernel. The only +solution is to disable EPT (Extended Page Tables). + +For both MDS and L1TF, if the guest vCPU is configured to not trust each +other (by tagging separately), then the guest to guest attacks would go away. +Or it could be a system admin policy which considers guest to guest attacks as +a guest problem. + +Another approach to resolve these would be to make every untrusted task on the +system to not trust every other untrusted task. While this could reduce +parallelism of the untrusted tasks, it would still solve the above issues while +allowing system processes (trusted tasks) to share a core. + +3. Protecting the kernel (IRQ, syscall, VMEXIT) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Unfortunately, core scheduling does not protect kernel contexts running on +sibling hyperthreads from one another. Prototypes of mitigations have been posted +to LKML to solve this, but it is debatable whether such windows are practically +exploitable, and whether the performance overhead of the prototypes are worth +it (not to mention, the added code complexity). + +Other Use cases +--------------- +The main use case for Core scheduling is mitigating the cross-HT vulnerabilities +with SMT enabled. There are other use cases where this feature could be used: + +- Isolating tasks that needs a whole core: Examples include realtime tasks, tasks + that uses SIMD instructions etc. +- Gang scheduling: Requirements for a group of tasks that needs to be scheduled + together could also be realized using core scheduling. One example is vCPUs of + a VM. diff --git a/Documentation/admin-guide/hw-vuln/cross-thread-rsb.rst b/Documentation/admin-guide/hw-vuln/cross-thread-rsb.rst new file mode 100644 index 000000000..ec6e9f5bc --- /dev/null +++ b/Documentation/admin-guide/hw-vuln/cross-thread-rsb.rst @@ -0,0 +1,92 @@ + +.. SPDX-License-Identifier: GPL-2.0 + +Cross-Thread Return Address Predictions +======================================= + +Certain AMD and Hygon processors are subject to a cross-thread return address +predictions vulnerability. When running in SMT mode and one sibling thread +transitions out of C0 state, the other sibling thread could use return target +predictions from the sibling thread that transitioned out of C0. + +The Spectre v2 mitigations protect the Linux kernel, as it fills the return +address prediction entries with safe targets when context switching to the idle +thread. However, KVM does allow a VMM to prevent exiting guest mode when +transitioning out of C0. This could result in a guest-controlled return target +being consumed by the sibling thread. + +Affected processors +------------------- + +The following CPUs are vulnerable: + + - AMD Family 17h processors + - Hygon Family 18h processors + +Related CVEs +------------ + +The following CVE entry is related to this issue: + + ============== ======================================= + CVE-2022-27672 Cross-Thread Return Address Predictions + ============== ======================================= + +Problem +------- + +Affected SMT-capable processors support 1T and 2T modes of execution when SMT +is enabled. In 2T mode, both threads in a core are executing code. For the +processor core to enter 1T mode, it is required that one of the threads +requests to transition out of the C0 state. This can be communicated with the +HLT instruction or with an MWAIT instruction that requests non-C0. +When the thread re-enters the C0 state, the processor transitions back +to 2T mode, assuming the other thread is also still in C0 state. + +In affected processors, the return address predictor (RAP) is partitioned +depending on the SMT mode. For instance, in 2T mode each thread uses a private +16-entry RAP, but in 1T mode, the active thread uses a 32-entry RAP. Upon +transition between 1T/2T mode, the RAP contents are not modified but the RAP +pointers (which control the next return target to use for predictions) may +change. This behavior may result in return targets from one SMT thread being +used by RET predictions in the sibling thread following a 1T/2T switch. In +particular, a RET instruction executed immediately after a transition to 1T may +use a return target from the thread that just became idle. In theory, this +could lead to information disclosure if the return targets used do not come +from trustworthy code. + +Attack scenarios +---------------- + +An attack can be mounted on affected processors by performing a series of CALL +instructions with targeted return locations and then transitioning out of C0 +state. + +Mitigation mechanism +-------------------- + +Before entering idle state, the kernel context switches to the idle thread. The +context switch fills the RAP entries (referred to as the RSB in Linux) with safe +targets by performing a sequence of CALL instructions. + +Prevent a guest VM from directly putting the processor into an idle state by +intercepting HLT and MWAIT instructions. + +Both mitigations are required to fully address this issue. + +Mitigation control on the kernel command line +--------------------------------------------- + +Use existing Spectre v2 mitigations that will fill the RSB on context switch. + +Mitigation control for KVM - module parameter +--------------------------------------------- + +By default, the KVM hypervisor mitigates this issue by intercepting guest +attempts to transition out of C0. A VMM can use the KVM_CAP_X86_DISABLE_EXITS +capability to override those interceptions, but since this is not common, the +mitigation that covers this path is not enabled by default. + +The mitigation for the KVM_CAP_X86_DISABLE_EXITS capability can be turned on +using the boolean module parameter mitigate_smt_rsb, e.g.: + kvm.mitigate_smt_rsb=1 diff --git a/Documentation/admin-guide/hw-vuln/gather_data_sampling.rst b/Documentation/admin-guide/hw-vuln/gather_data_sampling.rst new file mode 100644 index 000000000..264bfa937 --- /dev/null +++ b/Documentation/admin-guide/hw-vuln/gather_data_sampling.rst @@ -0,0 +1,109 @@ +.. SPDX-License-Identifier: GPL-2.0 + +GDS - Gather Data Sampling +========================== + +Gather Data Sampling is a hardware vulnerability which allows unprivileged +speculative access to data which was previously stored in vector registers. + +Problem +------- +When a gather instruction performs loads from memory, different data elements +are merged into the destination vector register. However, when a gather +instruction that is transiently executed encounters a fault, stale data from +architectural or internal vector registers may get transiently forwarded to the +destination vector register instead. This will allow a malicious attacker to +infer stale data using typical side channel techniques like cache timing +attacks. GDS is a purely sampling-based attack. + +The attacker uses gather instructions to infer the stale vector register data. +The victim does not need to do anything special other than use the vector +registers. The victim does not need to use gather instructions to be +vulnerable. + +Because the buffers are shared between Hyper-Threads cross Hyper-Thread attacks +are possible. + +Attack scenarios +---------------- +Without mitigation, GDS can infer stale data across virtually all +permission boundaries: + + Non-enclaves can infer SGX enclave data + Userspace can infer kernel data + Guests can infer data from hosts + Guest can infer guest from other guests + Users can infer data from other users + +Because of this, it is important to ensure that the mitigation stays enabled in +lower-privilege contexts like guests and when running outside SGX enclaves. + +The hardware enforces the mitigation for SGX. Likewise, VMMs should ensure +that guests are not allowed to disable the GDS mitigation. If a host erred and +allowed this, a guest could theoretically disable GDS mitigation, mount an +attack, and re-enable it. + +Mitigation mechanism +-------------------- +This issue is mitigated in microcode. The microcode defines the following new +bits: + + ================================ === ============================ + IA32_ARCH_CAPABILITIES[GDS_CTRL] R/O Enumerates GDS vulnerability + and mitigation support. + IA32_ARCH_CAPABILITIES[GDS_NO] R/O Processor is not vulnerable. + IA32_MCU_OPT_CTRL[GDS_MITG_DIS] R/W Disables the mitigation + 0 by default. + IA32_MCU_OPT_CTRL[GDS_MITG_LOCK] R/W Locks GDS_MITG_DIS=0. Writes + to GDS_MITG_DIS are ignored + Can't be cleared once set. + ================================ === ============================ + +GDS can also be mitigated on systems that don't have updated microcode by +disabling AVX. This can be done by setting gather_data_sampling="force" or +"clearcpuid=avx" on the kernel command-line. + +If used, these options will disable AVX use by turning off XSAVE YMM support. +However, the processor will still enumerate AVX support. Userspace that +does not follow proper AVX enumeration to check both AVX *and* XSAVE YMM +support will break. + +Mitigation control on the kernel command line +--------------------------------------------- +The mitigation can be disabled by setting "gather_data_sampling=off" or +"mitigations=off" on the kernel command line. Not specifying either will default +to the mitigation being enabled. Specifying "gather_data_sampling=force" will +use the microcode mitigation when available or disable AVX on affected systems +where the microcode hasn't been updated to include the mitigation. + +GDS System Information +------------------------ +The kernel provides vulnerability status information through sysfs. For +GDS this can be accessed by the following sysfs file: + +/sys/devices/system/cpu/vulnerabilities/gather_data_sampling + +The possible values contained in this file are: + + ============================== ============================================= + Not affected Processor not vulnerable. + Vulnerable Processor vulnerable and mitigation disabled. + Vulnerable: No microcode Processor vulnerable and microcode is missing + mitigation. + Mitigation: AVX disabled, + no microcode Processor is vulnerable and microcode is missing + mitigation. AVX disabled as mitigation. + Mitigation: Microcode Processor is vulnerable and mitigation is in + effect. + Mitigation: Microcode (locked) Processor is vulnerable and mitigation is in + effect and cannot be disabled. + Unknown: Dependent on + hypervisor status Running on a virtual guest processor that is + affected but with no way to know if host + processor is mitigated or vulnerable. + ============================== ============================================= + +GDS Default mitigation +---------------------- +The updated microcode will enable the mitigation by default. The kernel's +default action is to leave the mitigation enabled. diff --git a/Documentation/admin-guide/hw-vuln/index.rst b/Documentation/admin-guide/hw-vuln/index.rst new file mode 100644 index 000000000..6828102ba --- /dev/null +++ b/Documentation/admin-guide/hw-vuln/index.rst @@ -0,0 +1,23 @@ +======================== +Hardware vulnerabilities +======================== + +This section describes CPU vulnerabilities and provides an overview of the +possible mitigations along with guidance for selecting mitigations if they +are configurable at compile, boot or run time. + +.. toctree:: + :maxdepth: 1 + + spectre + l1tf + mds + tsx_async_abort + multihit.rst + special-register-buffer-data-sampling.rst + core-scheduling.rst + l1d_flush.rst + processor_mmio_stale_data.rst + cross-thread-rsb.rst + gather_data_sampling.rst + srso diff --git a/Documentation/admin-guide/hw-vuln/l1d_flush.rst b/Documentation/admin-guide/hw-vuln/l1d_flush.rst new file mode 100644 index 000000000..210020bc3 --- /dev/null +++ b/Documentation/admin-guide/hw-vuln/l1d_flush.rst @@ -0,0 +1,69 @@ +L1D Flushing +============ + +With an increasing number of vulnerabilities being reported around data +leaks from the Level 1 Data cache (L1D) the kernel provides an opt-in +mechanism to flush the L1D cache on context switch. + +This mechanism can be used to address e.g. CVE-2020-0550. For applications +the mechanism keeps them safe from vulnerabilities, related to leaks +(snooping of) from the L1D cache. + + +Related CVEs +------------ +The following CVEs can be addressed by this +mechanism + + ============= ======================== ================== + CVE-2020-0550 Improper Data Forwarding OS related aspects + ============= ======================== ================== + +Usage Guidelines +---------------- + +Please see document: :ref:`Documentation/userspace-api/spec_ctrl.rst +` for details. + +**NOTE**: The feature is disabled by default, applications need to +specifically opt into the feature to enable it. + +Mitigation +---------- + +When PR_SET_L1D_FLUSH is enabled for a task a flush of the L1D cache is +performed when the task is scheduled out and the incoming task belongs to a +different process and therefore to a different address space. + +If the underlying CPU supports L1D flushing in hardware, the hardware +mechanism is used, software fallback for the mitigation, is not supported. + +Mitigation control on the kernel command line +--------------------------------------------- + +The kernel command line allows to control the L1D flush mitigations at boot +time with the option "l1d_flush=". The valid arguments for this option are: + + ============ ============================================================= + on Enables the prctl interface, applications trying to use + the prctl() will fail with an error if l1d_flush is not + enabled + ============ ============================================================= + +By default the mechanism is disabled. + +Limitations +----------- + +The mechanism does not mitigate L1D data leaks between tasks belonging to +different processes which are concurrently executing on sibling threads of +a physical CPU core when SMT is enabled on the system. + +This can be addressed by controlled placement of processes on physical CPU +cores or by disabling SMT. See the relevant chapter in the L1TF mitigation +document: :ref:`Documentation/admin-guide/hw-vuln/l1tf.rst `. + +**NOTE** : The opt-in of a task for L1D flushing works only when the task's +affinity is limited to cores running in non-SMT mode. If a task which +requested L1D flushing is scheduled on a SMT-enabled core the kernel sends +a SIGBUS to the task. diff --git a/Documentation/admin-guide/hw-vuln/l1tf.rst b/Documentation/admin-guide/hw-vuln/l1tf.rst new file mode 100644 index 000000000..3eeeb488d --- /dev/null +++ b/Documentation/admin-guide/hw-vuln/l1tf.rst @@ -0,0 +1,615 @@ +L1TF - L1 Terminal Fault +======================== + +L1 Terminal Fault is a hardware vulnerability which allows unprivileged +speculative access to data which is available in the Level 1 Data Cache +when the page table entry controlling the virtual address, which is used +for the access, has the Present bit cleared or other reserved bits set. + +Affected processors +------------------- + +This vulnerability affects a wide range of Intel processors. The +vulnerability is not present on: + + - Processors from AMD, Centaur and other non Intel vendors + + - Older processor models, where the CPU family is < 6 + + - A range of Intel ATOM processors (Cedarview, Cloverview, Lincroft, + Penwell, Pineview, Silvermont, Airmont, Merrifield) + + - The Intel XEON PHI family + + - Intel processors which have the ARCH_CAP_RDCL_NO bit set in the + IA32_ARCH_CAPABILITIES MSR. If the bit is set the CPU is not affected + by the Meltdown vulnerability either. These CPUs should become + available by end of 2018. + +Whether a processor is affected or not can be read out from the L1TF +vulnerability file in sysfs. See :ref:`l1tf_sys_info`. + +Related CVEs +------------ + +The following CVE entries are related to the L1TF vulnerability: + + ============= ================= ============================== + CVE-2018-3615 L1 Terminal Fault SGX related aspects + CVE-2018-3620 L1 Terminal Fault OS, SMM related aspects + CVE-2018-3646 L1 Terminal Fault Virtualization related aspects + ============= ================= ============================== + +Problem +------- + +If an instruction accesses a virtual address for which the relevant page +table entry (PTE) has the Present bit cleared or other reserved bits set, +then speculative execution ignores the invalid PTE and loads the referenced +data if it is present in the Level 1 Data Cache, as if the page referenced +by the address bits in the PTE was still present and accessible. + +While this is a purely speculative mechanism and the instruction will raise +a page fault when it is retired eventually, the pure act of loading the +data and making it available to other speculative instructions opens up the +opportunity for side channel attacks to unprivileged malicious code, +similar to the Meltdown attack. + +While Meltdown breaks the user space to kernel space protection, L1TF +allows to attack any physical memory address in the system and the attack +works across all protection domains. It allows an attack of SGX and also +works from inside virtual machines because the speculation bypasses the +extended page table (EPT) protection mechanism. + + +Attack scenarios +---------------- + +1. Malicious user space +^^^^^^^^^^^^^^^^^^^^^^^ + + Operating Systems store arbitrary information in the address bits of a + PTE which is marked non present. This allows a malicious user space + application to attack the physical memory to which these PTEs resolve. + In some cases user-space can maliciously influence the information + encoded in the address bits of the PTE, thus making attacks more + deterministic and more practical. + + The Linux kernel contains a mitigation for this attack vector, PTE + inversion, which is permanently enabled and has no performance + impact. The kernel ensures that the address bits of PTEs, which are not + marked present, never point to cacheable physical memory space. + + A system with an up to date kernel is protected against attacks from + malicious user space applications. + +2. Malicious guest in a virtual machine +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + The fact that L1TF breaks all domain protections allows malicious guest + OSes, which can control the PTEs directly, and malicious guest user + space applications, which run on an unprotected guest kernel lacking the + PTE inversion mitigation for L1TF, to attack physical host memory. + + A special aspect of L1TF in the context of virtualization is symmetric + multi threading (SMT). The Intel implementation of SMT is called + HyperThreading. The fact that Hyperthreads on the affected processors + share the L1 Data Cache (L1D) is important for this. As the flaw allows + only to attack data which is present in L1D, a malicious guest running + on one Hyperthread can attack the data which is brought into the L1D by + the context which runs on the sibling Hyperthread of the same physical + core. This context can be host OS, host user space or a different guest. + + If the processor does not support Extended Page Tables, the attack is + only possible, when the hypervisor does not sanitize the content of the + effective (shadow) page tables. + + While solutions exist to mitigate these attack vectors fully, these + mitigations are not enabled by default in the Linux kernel because they + can affect performance significantly. The kernel provides several + mechanisms which can be utilized to address the problem depending on the + deployment scenario. The mitigations, their protection scope and impact + are described in the next sections. + + The default mitigations and the rationale for choosing them are explained + at the end of this document. See :ref:`default_mitigations`. + +.. _l1tf_sys_info: + +L1TF system information +----------------------- + +The Linux kernel provides a sysfs interface to enumerate the current L1TF +status of the system: whether the system is vulnerable, and which +mitigations are active. The relevant sysfs file is: + +/sys/devices/system/cpu/vulnerabilities/l1tf + +The possible values in this file are: + + =========================== =============================== + 'Not affected' The processor is not vulnerable + 'Mitigation: PTE Inversion' The host protection is active + =========================== =============================== + +If KVM/VMX is enabled and the processor is vulnerable then the following +information is appended to the 'Mitigation: PTE Inversion' part: + + - SMT status: + + ===================== ================ + 'VMX: SMT vulnerable' SMT is enabled + 'VMX: SMT disabled' SMT is disabled + ===================== ================ + + - L1D Flush mode: + + ================================ ==================================== + 'L1D vulnerable' L1D flushing is disabled + + 'L1D conditional cache flushes' L1D flush is conditionally enabled + + 'L1D cache flushes' L1D flush is unconditionally enabled + ================================ ==================================== + +The resulting grade of protection is discussed in the following sections. + + +Host mitigation mechanism +------------------------- + +The kernel is unconditionally protected against L1TF attacks from malicious +user space running on the host. + + +Guest mitigation mechanisms +--------------------------- + +.. _l1d_flush: + +1. L1D flush on VMENTER +^^^^^^^^^^^^^^^^^^^^^^^ + + To make sure that a guest cannot attack data which is present in the L1D + the hypervisor flushes the L1D before entering the guest. + + Flushing the L1D evicts not only the data which should not be accessed + by a potentially malicious guest, it also flushes the guest + data. Flushing the L1D has a performance impact as the processor has to + bring the flushed guest data back into the L1D. Depending on the + frequency of VMEXIT/VMENTER and the type of computations in the guest + performance degradation in the range of 1% to 50% has been observed. For + scenarios where guest VMEXIT/VMENTER are rare the performance impact is + minimal. Virtio and mechanisms like posted interrupts are designed to + confine the VMEXITs to a bare minimum, but specific configurations and + application scenarios might still suffer from a high VMEXIT rate. + + The kernel provides two L1D flush modes: + - conditional ('cond') + - unconditional ('always') + + The conditional mode avoids L1D flushing after VMEXITs which execute + only audited code paths before the corresponding VMENTER. These code + paths have been verified that they cannot expose secrets or other + interesting data to an attacker, but they can leak information about the + address space layout of the hypervisor. + + Unconditional mode flushes L1D on all VMENTER invocations and provides + maximum protection. It has a higher overhead than the conditional + mode. The overhead cannot be quantified correctly as it depends on the + workload scenario and the resulting number of VMEXITs. + + The general recommendation is to enable L1D flush on VMENTER. The kernel + defaults to conditional mode on affected processors. + + **Note**, that L1D flush does not prevent the SMT problem because the + sibling thread will also bring back its data into the L1D which makes it + attackable again. + + L1D flush can be controlled by the administrator via the kernel command + line and sysfs control files. See :ref:`mitigation_control_command_line` + and :ref:`mitigation_control_kvm`. + +.. _guest_confinement: + +2. Guest VCPU confinement to dedicated physical cores +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + To address the SMT problem, it is possible to make a guest or a group of + guests affine to one or more physical cores. The proper mechanism for + that is to utilize exclusive cpusets to ensure that no other guest or + host tasks can run on these cores. + + If only a single guest or related guests run on sibling SMT threads on + the same physical core then they can only attack their own memory and + restricted parts of the host memory. + + Host memory is attackable, when one of the sibling SMT threads runs in + host OS (hypervisor) context and the other in guest context. The amount + of valuable information from the host OS context depends on the context + which the host OS executes, i.e. interrupts, soft interrupts and kernel + threads. The amount of valuable data from these contexts cannot be + declared as non-interesting for an attacker without deep inspection of + the code. + + **Note**, that assigning guests to a fixed set of physical cores affects + the ability of the scheduler to do load balancing and might have + negative effects on CPU utilization depending on the hosting + scenario. Disabling SMT might be a viable alternative for particular + scenarios. + + For further information about confining guests to a single or to a group + of cores consult the cpusets documentation: + + https://www.kernel.org/doc/Documentation/admin-guide/cgroup-v1/cpusets.rst + +.. _interrupt_isolation: + +3. Interrupt affinity +^^^^^^^^^^^^^^^^^^^^^ + + Interrupts can be made affine to logical CPUs. This is not universally + true because there are types of interrupts which are truly per CPU + interrupts, e.g. the local timer interrupt. Aside of that multi queue + devices affine their interrupts to single CPUs or groups of CPUs per + queue without allowing the administrator to control the affinities. + + Moving the interrupts, which can be affinity controlled, away from CPUs + which run untrusted guests, reduces the attack vector space. + + Whether the interrupts with are affine to CPUs, which run untrusted + guests, provide interesting data for an attacker depends on the system + configuration and the scenarios which run on the system. While for some + of the interrupts it can be assumed that they won't expose interesting + information beyond exposing hints about the host OS memory layout, there + is no way to make general assumptions. + + Interrupt affinity can be controlled by the administrator via the + /proc/irq/$NR/smp_affinity[_list] files. Limited documentation is + available at: + + https://www.kernel.org/doc/Documentation/core-api/irq/irq-affinity.rst + +.. _smt_control: + +4. SMT control +^^^^^^^^^^^^^^ + + To prevent the SMT issues of L1TF it might be necessary to disable SMT + completely. Disabling SMT can have a significant performance impact, but + the impact depends on the hosting scenario and the type of workloads. + The impact of disabling SMT needs also to be weighted against the impact + of other mitigation solutions like confining guests to dedicated cores. + + The kernel provides a sysfs interface to retrieve the status of SMT and + to control it. It also provides a kernel command line interface to + control SMT. + + The kernel command line interface consists of the following options: + + =========== ========================================================== + nosmt Affects the bring up of the secondary CPUs during boot. The + kernel tries to bring all present CPUs online during the + boot process. "nosmt" makes sure that from each physical + core only one - the so called primary (hyper) thread is + activated. Due to a design flaw of Intel processors related + to Machine Check Exceptions the non primary siblings have + to be brought up at least partially and are then shut down + again. "nosmt" can be undone via the sysfs interface. + + nosmt=force Has the same effect as "nosmt" but it does not allow to + undo the SMT disable via the sysfs interface. + =========== ========================================================== + + The sysfs interface provides two files: + + - /sys/devices/system/cpu/smt/control + - /sys/devices/system/cpu/smt/active + + /sys/devices/system/cpu/smt/control: + + This file allows to read out the SMT control state and provides the + ability to disable or (re)enable SMT. The possible states are: + + ============== =================================================== + on SMT is supported by the CPU and enabled. All + logical CPUs can be onlined and offlined without + restrictions. + + off SMT is supported by the CPU and disabled. Only + the so called primary SMT threads can be onlined + and offlined without restrictions. An attempt to + online a non-primary sibling is rejected + + forceoff Same as 'off' but the state cannot be controlled. + Attempts to write to the control file are rejected. + + notsupported The processor does not support SMT. It's therefore + not affected by the SMT implications of L1TF. + Attempts to write to the control file are rejected. + ============== =================================================== + + The possible states which can be written into this file to control SMT + state are: + + - on + - off + - forceoff + + /sys/devices/system/cpu/smt/active: + + This file reports whether SMT is enabled and active, i.e. if on any + physical core two or more sibling threads are online. + + SMT control is also possible at boot time via the l1tf kernel command + line parameter in combination with L1D flush control. See + :ref:`mitigation_control_command_line`. + +5. Disabling EPT +^^^^^^^^^^^^^^^^ + + Disabling EPT for virtual machines provides full mitigation for L1TF even + with SMT enabled, because the effective page tables for guests are + managed and sanitized by the hypervisor. Though disabling EPT has a + significant performance impact especially when the Meltdown mitigation + KPTI is enabled. + + EPT can be disabled in the hypervisor via the 'kvm-intel.ept' parameter. + +There is ongoing research and development for new mitigation mechanisms to +address the performance impact of disabling SMT or EPT. + +.. _mitigation_control_command_line: + +Mitigation control on the kernel command line +--------------------------------------------- + +The kernel command line allows to control the L1TF mitigations at boot +time with the option "l1tf=". The valid arguments for this option are: + + ============ ============================================================= + full Provides all available mitigations for the L1TF + vulnerability. Disables SMT and enables all mitigations in + the hypervisors, i.e. unconditional L1D flushing + + SMT control and L1D flush control via the sysfs interface + is still possible after boot. Hypervisors will issue a + warning when the first VM is started in a potentially + insecure configuration, i.e. SMT enabled or L1D flush + disabled. + + full,force Same as 'full', but disables SMT and L1D flush runtime + control. Implies the 'nosmt=force' command line option. + (i.e. sysfs control of SMT is disabled.) + + flush Leaves SMT enabled and enables the default hypervisor + mitigation, i.e. conditional L1D flushing + + SMT control and L1D flush control via the sysfs interface + is still possible after boot. Hypervisors will issue a + warning when the first VM is started in a potentially + insecure configuration, i.e. SMT enabled or L1D flush + disabled. + + flush,nosmt Disables SMT and enables the default hypervisor mitigation, + i.e. conditional L1D flushing. + + SMT control and L1D flush control via the sysfs interface + is still possible after boot. Hypervisors will issue a + warning when the first VM is started in a potentially + insecure configuration, i.e. SMT enabled or L1D flush + disabled. + + flush,nowarn Same as 'flush', but hypervisors will not warn when a VM is + started in a potentially insecure configuration. + + off Disables hypervisor mitigations and doesn't emit any + warnings. + It also drops the swap size and available RAM limit restrictions + on both hypervisor and bare metal. + + ============ ============================================================= + +The default is 'flush'. For details about L1D flushing see :ref:`l1d_flush`. + + +.. _mitigation_control_kvm: + +Mitigation control for KVM - module parameter +------------------------------------------------------------- + +The KVM hypervisor mitigation mechanism, flushing the L1D cache when +entering a guest, can be controlled with a module parameter. + +The option/parameter is "kvm-intel.vmentry_l1d_flush=". It takes the +following arguments: + + ============ ============================================================== + always L1D cache flush on every VMENTER. + + cond Flush L1D on VMENTER only when the code between VMEXIT and + VMENTER can leak host memory which is considered + interesting for an attacker. This still can leak host memory + which allows e.g. to determine the hosts address space layout. + + never Disables the mitigation + ============ ============================================================== + +The parameter can be provided on the kernel command line, as a module +parameter when loading the modules and at runtime modified via the sysfs +file: + +/sys/module/kvm_intel/parameters/vmentry_l1d_flush + +The default is 'cond'. If 'l1tf=full,force' is given on the kernel command +line, then 'always' is enforced and the kvm-intel.vmentry_l1d_flush +module parameter is ignored and writes to the sysfs file are rejected. + +.. _mitigation_selection: + +Mitigation selection guide +-------------------------- + +1. No virtualization in use +^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + The system is protected by the kernel unconditionally and no further + action is required. + +2. Virtualization with trusted guests +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + If the guest comes from a trusted source and the guest OS kernel is + guaranteed to have the L1TF mitigations in place the system is fully + protected against L1TF and no further action is required. + + To avoid the overhead of the default L1D flushing on VMENTER the + administrator can disable the flushing via the kernel command line and + sysfs control files. See :ref:`mitigation_control_command_line` and + :ref:`mitigation_control_kvm`. + + +3. Virtualization with untrusted guests +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +3.1. SMT not supported or disabled +"""""""""""""""""""""""""""""""""" + + If SMT is not supported by the processor or disabled in the BIOS or by + the kernel, it's only required to enforce L1D flushing on VMENTER. + + Conditional L1D flushing is the default behaviour and can be tuned. See + :ref:`mitigation_control_command_line` and :ref:`mitigation_control_kvm`. + +3.2. EPT not supported or disabled +"""""""""""""""""""""""""""""""""" + + If EPT is not supported by the processor or disabled in the hypervisor, + the system is fully protected. SMT can stay enabled and L1D flushing on + VMENTER is not required. + + EPT can be disabled in the hypervisor via the 'kvm-intel.ept' parameter. + +3.3. SMT and EPT supported and active +""""""""""""""""""""""""""""""""""""" + + If SMT and EPT are supported and active then various degrees of + mitigations can be employed: + + - L1D flushing on VMENTER: + + L1D flushing on VMENTER is the minimal protection requirement, but it + is only potent in combination with other mitigation methods. + + Conditional L1D flushing is the default behaviour and can be tuned. See + :ref:`mitigation_control_command_line` and :ref:`mitigation_control_kvm`. + + - Guest confinement: + + Confinement of guests to a single or a group of physical cores which + are not running any other processes, can reduce the attack surface + significantly, but interrupts, soft interrupts and kernel threads can + still expose valuable data to a potential attacker. See + :ref:`guest_confinement`. + + - Interrupt isolation: + + Isolating the guest CPUs from interrupts can reduce the attack surface + further, but still allows a malicious guest to explore a limited amount + of host physical memory. This can at least be used to gain knowledge + about the host address space layout. The interrupts which have a fixed + affinity to the CPUs which run the untrusted guests can depending on + the scenario still trigger soft interrupts and schedule kernel threads + which might expose valuable information. See + :ref:`interrupt_isolation`. + +The above three mitigation methods combined can provide protection to a +certain degree, but the risk of the remaining attack surface has to be +carefully analyzed. For full protection the following methods are +available: + + - Disabling SMT: + + Disabling SMT and enforcing the L1D flushing provides the maximum + amount of protection. This mitigation is not depending on any of the + above mitigation methods. + + SMT control and L1D flushing can be tuned by the command line + parameters 'nosmt', 'l1tf', 'kvm-intel.vmentry_l1d_flush' and at run + time with the matching sysfs control files. See :ref:`smt_control`, + :ref:`mitigation_control_command_line` and + :ref:`mitigation_control_kvm`. + + - Disabling EPT: + + Disabling EPT provides the maximum amount of protection as well. It is + not depending on any of the above mitigation methods. SMT can stay + enabled and L1D flushing is not required, but the performance impact is + significant. + + EPT can be disabled in the hypervisor via the 'kvm-intel.ept' + parameter. + +3.4. Nested virtual machines +"""""""""""""""""""""""""""" + +When nested virtualization is in use, three operating systems are involved: +the bare metal hypervisor, the nested hypervisor and the nested virtual +machine. VMENTER operations from the nested hypervisor into the nested +guest will always be processed by the bare metal hypervisor. If KVM is the +bare metal hypervisor it will: + + - Flush the L1D cache on every switch from the nested hypervisor to the + nested virtual machine, so that the nested hypervisor's secrets are not + exposed to the nested virtual machine; + + - Flush the L1D cache on every switch from the nested virtual machine to + the nested hypervisor; this is a complex operation, and flushing the L1D + cache avoids that the bare metal hypervisor's secrets are exposed to the + nested virtual machine; + + - Instruct the nested hypervisor to not perform any L1D cache flush. This + is an optimization to avoid double L1D flushing. + + +.. _default_mitigations: + +Default mitigations +------------------- + + The kernel default mitigations for vulnerable processors are: + + - PTE inversion to protect against malicious user space. This is done + unconditionally and cannot be controlled. The swap storage is limited + to ~16TB. + + - L1D conditional flushing on VMENTER when EPT is enabled for + a guest. + + The kernel does not by default enforce the disabling of SMT, which leaves + SMT systems vulnerable when running untrusted guests with EPT enabled. + + The rationale for this choice is: + + - Force disabling SMT can break existing setups, especially with + unattended updates. + + - If regular users run untrusted guests on their machine, then L1TF is + just an add on to other malware which might be embedded in an untrusted + guest, e.g. spam-bots or attacks on the local network. + + There is no technical way to prevent a user from running untrusted code + on their machines blindly. + + - It's technically extremely unlikely and from today's knowledge even + impossible that L1TF can be exploited via the most popular attack + mechanisms like JavaScript because these mechanisms have no way to + control PTEs. If this would be possible and not other mitigation would + be possible, then the default might be different. + + - The administrators of cloud and hosting setups have to carefully + analyze the risk for their scenarios and make the appropriate + mitigation choices, which might even vary across their deployed + machines and also result in other changes of their overall setup. + There is no way for the kernel to provide a sensible default for this + kind of scenarios. diff --git a/Documentation/admin-guide/hw-vuln/mds.rst b/Documentation/admin-guide/hw-vuln/mds.rst new file mode 100644 index 000000000..2d19c9f4c --- /dev/null +++ b/Documentation/admin-guide/hw-vuln/mds.rst @@ -0,0 +1,311 @@ +MDS - Microarchitectural Data Sampling +====================================== + +Microarchitectural Data Sampling is a hardware vulnerability which allows +unprivileged speculative access to data which is available in various CPU +internal buffers. + +Affected processors +------------------- + +This vulnerability affects a wide range of Intel processors. The +vulnerability is not present on: + + - Processors from AMD, Centaur and other non Intel vendors + + - Older processor models, where the CPU family is < 6 + + - Some Atoms (Bonnell, Saltwell, Goldmont, GoldmontPlus) + + - Intel processors which have the ARCH_CAP_MDS_NO bit set in the + IA32_ARCH_CAPABILITIES MSR. + +Whether a processor is affected or not can be read out from the MDS +vulnerability file in sysfs. See :ref:`mds_sys_info`. + +Not all processors are affected by all variants of MDS, but the mitigation +is identical for all of them so the kernel treats them as a single +vulnerability. + +Related CVEs +------------ + +The following CVE entries are related to the MDS vulnerability: + + ============== ===== =================================================== + CVE-2018-12126 MSBDS Microarchitectural Store Buffer Data Sampling + CVE-2018-12130 MFBDS Microarchitectural Fill Buffer Data Sampling + CVE-2018-12127 MLPDS Microarchitectural Load Port Data Sampling + CVE-2019-11091 MDSUM Microarchitectural Data Sampling Uncacheable Memory + ============== ===== =================================================== + +Problem +------- + +When performing store, load, L1 refill operations, processors write data +into temporary microarchitectural structures (buffers). The data in the +buffer can be forwarded to load operations as an optimization. + +Under certain conditions, usually a fault/assist caused by a load +operation, data unrelated to the load memory address can be speculatively +forwarded from the buffers. Because the load operation causes a fault or +assist and its result will be discarded, the forwarded data will not cause +incorrect program execution or state changes. But a malicious operation +may be able to forward this speculative data to a disclosure gadget which +allows in turn to infer the value via a cache side channel attack. + +Because the buffers are potentially shared between Hyper-Threads cross +Hyper-Thread attacks are possible. + +Deeper technical information is available in the MDS specific x86 +architecture section: :ref:`Documentation/x86/mds.rst `. + + +Attack scenarios +---------------- + +Attacks against the MDS vulnerabilities can be mounted from malicious non +priviledged user space applications running on hosts or guest. Malicious +guest OSes can obviously mount attacks as well. + +Contrary to other speculation based vulnerabilities the MDS vulnerability +does not allow the attacker to control the memory target address. As a +consequence the attacks are purely sampling based, but as demonstrated with +the TLBleed attack samples can be postprocessed successfully. + +Web-Browsers +^^^^^^^^^^^^ + + It's unclear whether attacks through Web-Browsers are possible at + all. The exploitation through Java-Script is considered very unlikely, + but other widely used web technologies like Webassembly could possibly be + abused. + + +.. _mds_sys_info: + +MDS system information +----------------------- + +The Linux kernel provides a sysfs interface to enumerate the current MDS +status of the system: whether the system is vulnerable, and which +mitigations are active. The relevant sysfs file is: + +/sys/devices/system/cpu/vulnerabilities/mds + +The possible values in this file are: + + .. list-table:: + + * - 'Not affected' + - The processor is not vulnerable + * - 'Vulnerable' + - The processor is vulnerable, but no mitigation enabled + * - 'Vulnerable: Clear CPU buffers attempted, no microcode' + - The processor is vulnerable but microcode is not updated. + + The mitigation is enabled on a best effort basis. See :ref:`vmwerv` + * - 'Mitigation: Clear CPU buffers' + - The processor is vulnerable and the CPU buffer clearing mitigation is + enabled. + +If the processor is vulnerable then the following information is appended +to the above information: + + ======================== ============================================ + 'SMT vulnerable' SMT is enabled + 'SMT mitigated' SMT is enabled and mitigated + 'SMT disabled' SMT is disabled + 'SMT Host state unknown' Kernel runs in a VM, Host SMT state unknown + ======================== ============================================ + +.. _vmwerv: + +Best effort mitigation mode +^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + If the processor is vulnerable, but the availability of the microcode based + mitigation mechanism is not advertised via CPUID the kernel selects a best + effort mitigation mode. This mode invokes the mitigation instructions + without a guarantee that they clear the CPU buffers. + + This is done to address virtualization scenarios where the host has the + microcode update applied, but the hypervisor is not yet updated to expose + the CPUID to the guest. If the host has updated microcode the protection + takes effect otherwise a few cpu cycles are wasted pointlessly. + + The state in the mds sysfs file reflects this situation accordingly. + + +Mitigation mechanism +------------------------- + +The kernel detects the affected CPUs and the presence of the microcode +which is required. + +If a CPU is affected and the microcode is available, then the kernel +enables the mitigation by default. The mitigation can be controlled at boot +time via a kernel command line option. See +:ref:`mds_mitigation_control_command_line`. + +.. _cpu_buffer_clear: + +CPU buffer clearing +^^^^^^^^^^^^^^^^^^^ + + The mitigation for MDS clears the affected CPU buffers on return to user + space and when entering a guest. + + If SMT is enabled it also clears the buffers on idle entry when the CPU + is only affected by MSBDS and not any other MDS variant, because the + other variants cannot be protected against cross Hyper-Thread attacks. + + For CPUs which are only affected by MSBDS the user space, guest and idle + transition mitigations are sufficient and SMT is not affected. + +.. _virt_mechanism: + +Virtualization mitigation +^^^^^^^^^^^^^^^^^^^^^^^^^ + + The protection for host to guest transition depends on the L1TF + vulnerability of the CPU: + + - CPU is affected by L1TF: + + If the L1D flush mitigation is enabled and up to date microcode is + available, the L1D flush mitigation is automatically protecting the + guest transition. + + If the L1D flush mitigation is disabled then the MDS mitigation is + invoked explicit when the host MDS mitigation is enabled. + + For details on L1TF and virtualization see: + :ref:`Documentation/admin-guide/hw-vuln//l1tf.rst `. + + - CPU is not affected by L1TF: + + CPU buffers are flushed before entering the guest when the host MDS + mitigation is enabled. + + The resulting MDS protection matrix for the host to guest transition: + + ============ ===== ============= ============ ================= + L1TF MDS VMX-L1FLUSH Host MDS MDS-State + + Don't care No Don't care N/A Not affected + + Yes Yes Disabled Off Vulnerable + + Yes Yes Disabled Full Mitigated + + Yes Yes Enabled Don't care Mitigated + + No Yes N/A Off Vulnerable + + No Yes N/A Full Mitigated + ============ ===== ============= ============ ================= + + This only covers the host to guest transition, i.e. prevents leakage from + host to guest, but does not protect the guest internally. Guests need to + have their own protections. + +.. _xeon_phi: + +XEON PHI specific considerations +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + The XEON PHI processor family is affected by MSBDS which can be exploited + cross Hyper-Threads when entering idle states. Some XEON PHI variants allow + to use MWAIT in user space (Ring 3) which opens an potential attack vector + for malicious user space. The exposure can be disabled on the kernel + command line with the 'ring3mwait=disable' command line option. + + XEON PHI is not affected by the other MDS variants and MSBDS is mitigated + before the CPU enters a idle state. As XEON PHI is not affected by L1TF + either disabling SMT is not required for full protection. + +.. _mds_smt_control: + +SMT control +^^^^^^^^^^^ + + All MDS variants except MSBDS can be attacked cross Hyper-Threads. That + means on CPUs which are affected by MFBDS or MLPDS it is necessary to + disable SMT for full protection. These are most of the affected CPUs; the + exception is XEON PHI, see :ref:`xeon_phi`. + + Disabling SMT can have a significant performance impact, but the impact + depends on the type of workloads. + + See the relevant chapter in the L1TF mitigation documentation for details: + :ref:`Documentation/admin-guide/hw-vuln/l1tf.rst `. + + +.. _mds_mitigation_control_command_line: + +Mitigation control on the kernel command line +--------------------------------------------- + +The kernel command line allows to control the MDS mitigations at boot +time with the option "mds=". The valid arguments for this option are: + + ============ ============================================================= + full If the CPU is vulnerable, enable all available mitigations + for the MDS vulnerability, CPU buffer clearing on exit to + userspace and when entering a VM. Idle transitions are + protected as well if SMT is enabled. + + It does not automatically disable SMT. + + full,nosmt The same as mds=full, with SMT disabled on vulnerable + CPUs. This is the complete mitigation. + + off Disables MDS mitigations completely. + + ============ ============================================================= + +Not specifying this option is equivalent to "mds=full". For processors +that are affected by both TAA (TSX Asynchronous Abort) and MDS, +specifying just "mds=off" without an accompanying "tsx_async_abort=off" +will have no effect as the same mitigation is used for both +vulnerabilities. + +Mitigation selection guide +-------------------------- + +1. Trusted userspace +^^^^^^^^^^^^^^^^^^^^ + + If all userspace applications are from a trusted source and do not + execute untrusted code which is supplied externally, then the mitigation + can be disabled. + + +2. Virtualization with trusted guests +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + The same considerations as above versus trusted user space apply. + +3. Virtualization with untrusted guests +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + The protection depends on the state of the L1TF mitigations. + See :ref:`virt_mechanism`. + + If the MDS mitigation is enabled and SMT is disabled, guest to host and + guest to guest attacks are prevented. + +.. _mds_default_mitigations: + +Default mitigations +------------------- + + The kernel default mitigations for vulnerable processors are: + + - Enable CPU buffer clearing + + The kernel does not by default enforce the disabling of SMT, which leaves + SMT systems vulnerable when running untrusted code. The same rationale as + for L1TF applies. + See :ref:`Documentation/admin-guide/hw-vuln//l1tf.rst `. diff --git a/Documentation/admin-guide/hw-vuln/multihit.rst b/Documentation/admin-guide/hw-vuln/multihit.rst new file mode 100644 index 000000000..140e4cec3 --- /dev/null +++ b/Documentation/admin-guide/hw-vuln/multihit.rst @@ -0,0 +1,167 @@ +iTLB multihit +============= + +iTLB multihit is an erratum where some processors may incur a machine check +error, possibly resulting in an unrecoverable CPU lockup, when an +instruction fetch hits multiple entries in the instruction TLB. This can +occur when the page size is changed along with either the physical address +or cache type. A malicious guest running on a virtualized system can +exploit this erratum to perform a denial of service attack. + + +Affected processors +------------------- + +Variations of this erratum are present on most Intel Core and Xeon processor +models. The erratum is not present on: + + - non-Intel processors + + - Some Atoms (Airmont, Bonnell, Goldmont, GoldmontPlus, Saltwell, Silvermont) + + - Intel processors that have the PSCHANGE_MC_NO bit set in the + IA32_ARCH_CAPABILITIES MSR. + + +Related CVEs +------------ + +The following CVE entry is related to this issue: + + ============== ================================================= + CVE-2018-12207 Machine Check Error Avoidance on Page Size Change + ============== ================================================= + + +Problem +------- + +Privileged software, including OS and virtual machine managers (VMM), are in +charge of memory management. A key component in memory management is the control +of the page tables. Modern processors use virtual memory, a technique that creates +the illusion of a very large memory for processors. This virtual space is split +into pages of a given size. Page tables translate virtual addresses to physical +addresses. + +To reduce latency when performing a virtual to physical address translation, +processors include a structure, called TLB, that caches recent translations. +There are separate TLBs for instruction (iTLB) and data (dTLB). + +Under this errata, instructions are fetched from a linear address translated +using a 4 KB translation cached in the iTLB. Privileged software modifies the +paging structure so that the same linear address using large page size (2 MB, 4 +MB, 1 GB) with a different physical address or memory type. After the page +structure modification but before the software invalidates any iTLB entries for +the linear address, a code fetch that happens on the same linear address may +cause a machine-check error which can result in a system hang or shutdown. + + +Attack scenarios +---------------- + +Attacks against the iTLB multihit erratum can be mounted from malicious +guests in a virtualized system. + + +iTLB multihit system information +-------------------------------- + +The Linux kernel provides a sysfs interface to enumerate the current iTLB +multihit status of the system:whether the system is vulnerable and which +mitigations are active. The relevant sysfs file is: + +/sys/devices/system/cpu/vulnerabilities/itlb_multihit + +The possible values in this file are: + +.. list-table:: + + * - Not affected + - The processor is not vulnerable. + * - KVM: Mitigation: Split huge pages + - Software changes mitigate this issue. + * - KVM: Mitigation: VMX unsupported + - KVM is not vulnerable because Virtual Machine Extensions (VMX) is not supported. + * - KVM: Mitigation: VMX disabled + - KVM is not vulnerable because Virtual Machine Extensions (VMX) is disabled. + * - KVM: Vulnerable + - The processor is vulnerable, but no mitigation enabled + + +Enumeration of the erratum +-------------------------------- + +A new bit has been allocated in the IA32_ARCH_CAPABILITIES (PSCHANGE_MC_NO) msr +and will be set on CPU's which are mitigated against this issue. + + ======================================= =========== =============================== + IA32_ARCH_CAPABILITIES MSR Not present Possibly vulnerable,check model + IA32_ARCH_CAPABILITIES[PSCHANGE_MC_NO] '0' Likely vulnerable,check model + IA32_ARCH_CAPABILITIES[PSCHANGE_MC_NO] '1' Not vulnerable + ======================================= =========== =============================== + + +Mitigation mechanism +------------------------- + +This erratum can be mitigated by restricting the use of large page sizes to +non-executable pages. This forces all iTLB entries to be 4K, and removes +the possibility of multiple hits. + +In order to mitigate the vulnerability, KVM initially marks all huge pages +as non-executable. If the guest attempts to execute in one of those pages, +the page is broken down into 4K pages, which are then marked executable. + +If EPT is disabled or not available on the host, KVM is in control of TLB +flushes and the problematic situation cannot happen. However, the shadow +EPT paging mechanism used by nested virtualization is vulnerable, because +the nested guest can trigger multiple iTLB hits by modifying its own +(non-nested) page tables. For simplicity, KVM will make large pages +non-executable in all shadow paging modes. + +Mitigation control on the kernel command line and KVM - module parameter +------------------------------------------------------------------------ + +The KVM hypervisor mitigation mechanism for marking huge pages as +non-executable can be controlled with a module parameter "nx_huge_pages=". +The kernel command line allows to control the iTLB multihit mitigations at +boot time with the option "kvm.nx_huge_pages=". + +The valid arguments for these options are: + + ========== ================================================================ + force Mitigation is enabled. In this case, the mitigation implements + non-executable huge pages in Linux kernel KVM module. All huge + pages in the EPT are marked as non-executable. + If a guest attempts to execute in one of those pages, the page is + broken down into 4K pages, which are then marked executable. + + off Mitigation is disabled. + + auto Enable mitigation only if the platform is affected and the kernel + was not booted with the "mitigations=off" command line parameter. + This is the default option. + ========== ================================================================ + + +Mitigation selection guide +-------------------------- + +1. No virtualization in use +^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + The system is protected by the kernel unconditionally and no further + action is required. + +2. Virtualization with trusted guests +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + If the guest comes from a trusted source, you may assume that the guest will + not attempt to maliciously exploit these errata and no further action is + required. + +3. Virtualization with untrusted guests +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + If the guest comes from an untrusted source, the guest host kernel will need + to apply iTLB multihit mitigation via the kernel command line or kvm + module parameter. diff --git a/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst b/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst new file mode 100644 index 000000000..c98fd1190 --- /dev/null +++ b/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst @@ -0,0 +1,260 @@ +========================================= +Processor MMIO Stale Data Vulnerabilities +========================================= + +Processor MMIO Stale Data Vulnerabilities are a class of memory-mapped I/O +(MMIO) vulnerabilities that can expose data. The sequences of operations for +exposing data range from simple to very complex. Because most of the +vulnerabilities require the attacker to have access to MMIO, many environments +are not affected. System environments using virtualization where MMIO access is +provided to untrusted guests may need mitigation. These vulnerabilities are +not transient execution attacks. However, these vulnerabilities may propagate +stale data into core fill buffers where the data can subsequently be inferred +by an unmitigated transient execution attack. Mitigation for these +vulnerabilities includes a combination of microcode update and software +changes, depending on the platform and usage model. Some of these mitigations +are similar to those used to mitigate Microarchitectural Data Sampling (MDS) or +those used to mitigate Special Register Buffer Data Sampling (SRBDS). + +Data Propagators +================ +Propagators are operations that result in stale data being copied or moved from +one microarchitectural buffer or register to another. Processor MMIO Stale Data +Vulnerabilities are operations that may result in stale data being directly +read into an architectural, software-visible state or sampled from a buffer or +register. + +Fill Buffer Stale Data Propagator (FBSDP) +----------------------------------------- +Stale data may propagate from fill buffers (FB) into the non-coherent portion +of the uncore on some non-coherent writes. Fill buffer propagation by itself +does not make stale data architecturally visible. Stale data must be propagated +to a location where it is subject to reading or sampling. + +Sideband Stale Data Propagator (SSDP) +------------------------------------- +The sideband stale data propagator (SSDP) is limited to the client (including +Intel Xeon server E3) uncore implementation. The sideband response buffer is +shared by all client cores. For non-coherent reads that go to sideband +destinations, the uncore logic returns 64 bytes of data to the core, including +both requested data and unrequested stale data, from a transaction buffer and +the sideband response buffer. As a result, stale data from the sideband +response and transaction buffers may now reside in a core fill buffer. + +Primary Stale Data Propagator (PSDP) +------------------------------------ +The primary stale data propagator (PSDP) is limited to the client (including +Intel Xeon server E3) uncore implementation. Similar to the sideband response +buffer, the primary response buffer is shared by all client cores. For some +processors, MMIO primary reads will return 64 bytes of data to the core fill +buffer including both requested data and unrequested stale data. This is +similar to the sideband stale data propagator. + +Vulnerabilities +=============== +Device Register Partial Write (DRPW) (CVE-2022-21166) +----------------------------------------------------- +Some endpoint MMIO registers incorrectly handle writes that are smaller than +the register size. Instead of aborting the write or only copying the correct +subset of bytes (for example, 2 bytes for a 2-byte write), more bytes than +specified by the write transaction may be written to the register. On +processors affected by FBSDP, this may expose stale data from the fill buffers +of the core that created the write transaction. + +Shared Buffers Data Sampling (SBDS) (CVE-2022-21125) +---------------------------------------------------- +After propagators may have moved data around the uncore and copied stale data +into client core fill buffers, processors affected by MFBDS can leak data from +the fill buffer. It is limited to the client (including Intel Xeon server E3) +uncore implementation. + +Shared Buffers Data Read (SBDR) (CVE-2022-21123) +------------------------------------------------ +It is similar to Shared Buffer Data Sampling (SBDS) except that the data is +directly read into the architectural software-visible state. It is limited to +the client (including Intel Xeon server E3) uncore implementation. + +Affected Processors +=================== +Not all the CPUs are affected by all the variants. For instance, most +processors for the server market (excluding Intel Xeon E3 processors) are +impacted by only Device Register Partial Write (DRPW). + +Below is the list of affected Intel processors [#f1]_: + + =================== ============ ========= + Common name Family_Model Steppings + =================== ============ ========= + HASWELL_X 06_3FH 2,4 + SKYLAKE_L 06_4EH 3 + BROADWELL_X 06_4FH All + SKYLAKE_X 06_55H 3,4,6,7,11 + BROADWELL_D 06_56H 3,4,5 + SKYLAKE 06_5EH 3 + ICELAKE_X 06_6AH 4,5,6 + ICELAKE_D 06_6CH 1 + ICELAKE_L 06_7EH 5 + ATOM_TREMONT_D 06_86H All + LAKEFIELD 06_8AH 1 + KABYLAKE_L 06_8EH 9 to 12 + ATOM_TREMONT 06_96H 1 + ATOM_TREMONT_L 06_9CH 0 + KABYLAKE 06_9EH 9 to 13 + COMETLAKE 06_A5H 2,3,5 + COMETLAKE_L 06_A6H 0,1 + ROCKETLAKE 06_A7H 1 + =================== ============ ========= + +If a CPU is in the affected processor list, but not affected by a variant, it +is indicated by new bits in MSR IA32_ARCH_CAPABILITIES. As described in a later +section, mitigation largely remains the same for all the variants, i.e. to +clear the CPU fill buffers via VERW instruction. + +New bits in MSRs +================ +Newer processors and microcode update on existing affected processors added new +bits to IA32_ARCH_CAPABILITIES MSR. These bits can be used to enumerate +specific variants of Processor MMIO Stale Data vulnerabilities and mitigation +capability. + +MSR IA32_ARCH_CAPABILITIES +-------------------------- +Bit 13 - SBDR_SSDP_NO - When set, processor is not affected by either the + Shared Buffers Data Read (SBDR) vulnerability or the sideband stale + data propagator (SSDP). +Bit 14 - FBSDP_NO - When set, processor is not affected by the Fill Buffer + Stale Data Propagator (FBSDP). +Bit 15 - PSDP_NO - When set, processor is not affected by Primary Stale Data + Propagator (PSDP). +Bit 17 - FB_CLEAR - When set, VERW instruction will overwrite CPU fill buffer + values as part of MD_CLEAR operations. Processors that do not + enumerate MDS_NO (meaning they are affected by MDS) but that do + enumerate support for both L1D_FLUSH and MD_CLEAR implicitly enumerate + FB_CLEAR as part of their MD_CLEAR support. +Bit 18 - FB_CLEAR_CTRL - Processor supports read and write to MSR + IA32_MCU_OPT_CTRL[FB_CLEAR_DIS]. On such processors, the FB_CLEAR_DIS + bit can be set to cause the VERW instruction to not perform the + FB_CLEAR action. Not all processors that support FB_CLEAR will support + FB_CLEAR_CTRL. + +MSR IA32_MCU_OPT_CTRL +--------------------- +Bit 3 - FB_CLEAR_DIS - When set, VERW instruction does not perform the FB_CLEAR +action. This may be useful to reduce the performance impact of FB_CLEAR in +cases where system software deems it warranted (for example, when performance +is more critical, or the untrusted software has no MMIO access). Note that +FB_CLEAR_DIS has no impact on enumeration (for example, it does not change +FB_CLEAR or MD_CLEAR enumeration) and it may not be supported on all processors +that enumerate FB_CLEAR. + +Mitigation +========== +Like MDS, all variants of Processor MMIO Stale Data vulnerabilities have the +same mitigation strategy to force the CPU to clear the affected buffers before +an attacker can extract the secrets. + +This is achieved by using the otherwise unused and obsolete VERW instruction in +combination with a microcode update. The microcode clears the affected CPU +buffers when the VERW instruction is executed. + +Kernel reuses the MDS function to invoke the buffer clearing: + + mds_clear_cpu_buffers() + +On MDS affected CPUs, the kernel already invokes CPU buffer clear on +kernel/userspace, hypervisor/guest and C-state (idle) transitions. No +additional mitigation is needed on such CPUs. + +For CPUs not affected by MDS or TAA, mitigation is needed only for the attacker +with MMIO capability. Therefore, VERW is not required for kernel/userspace. For +virtualization case, VERW is only needed at VMENTER for a guest with MMIO +capability. + +Mitigation points +----------------- +Return to user space +^^^^^^^^^^^^^^^^^^^^ +Same mitigation as MDS when affected by MDS/TAA, otherwise no mitigation +needed. + +C-State transition +^^^^^^^^^^^^^^^^^^ +Control register writes by CPU during C-state transition can propagate data +from fill buffer to uncore buffers. Execute VERW before C-state transition to +clear CPU fill buffers. + +Guest entry point +^^^^^^^^^^^^^^^^^ +Same mitigation as MDS when processor is also affected by MDS/TAA, otherwise +execute VERW at VMENTER only for MMIO capable guests. On CPUs not affected by +MDS/TAA, guest without MMIO access cannot extract secrets using Processor MMIO +Stale Data vulnerabilities, so there is no need to execute VERW for such guests. + +Mitigation control on the kernel command line +--------------------------------------------- +The kernel command line allows to control the Processor MMIO Stale Data +mitigations at boot time with the option "mmio_stale_data=". The valid +arguments for this option are: + + ========== ================================================================= + full If the CPU is vulnerable, enable mitigation; CPU buffer clearing + on exit to userspace and when entering a VM. Idle transitions are + protected as well. It does not automatically disable SMT. + full,nosmt Same as full, with SMT disabled on vulnerable CPUs. This is the + complete mitigation. + off Disables mitigation completely. + ========== ================================================================= + +If the CPU is affected and mmio_stale_data=off is not supplied on the kernel +command line, then the kernel selects the appropriate mitigation. + +Mitigation status information +----------------------------- +The Linux kernel provides a sysfs interface to enumerate the current +vulnerability status of the system: whether the system is vulnerable, and +which mitigations are active. The relevant sysfs file is: + + /sys/devices/system/cpu/vulnerabilities/mmio_stale_data + +The possible values in this file are: + + .. list-table:: + + * - 'Not affected' + - The processor is not vulnerable + * - 'Vulnerable' + - The processor is vulnerable, but no mitigation enabled + * - 'Vulnerable: Clear CPU buffers attempted, no microcode' + - The processor is vulnerable, but microcode is not updated. The + mitigation is enabled on a best effort basis. + * - 'Mitigation: Clear CPU buffers' + - The processor is vulnerable and the CPU buffer clearing mitigation is + enabled. + * - 'Unknown: No mitigations' + - The processor vulnerability status is unknown because it is + out of Servicing period. Mitigation is not attempted. + +Definitions: +------------ + +Servicing period: The process of providing functional and security updates to +Intel processors or platforms, utilizing the Intel Platform Update (IPU) +process or other similar mechanisms. + +End of Servicing Updates (ESU): ESU is the date at which Intel will no +longer provide Servicing, such as through IPU or other similar update +processes. ESU dates will typically be aligned to end of quarter. + +If the processor is vulnerable then the following information is appended to +the above information: + + ======================== =========================================== + 'SMT vulnerable' SMT is enabled + 'SMT disabled' SMT is disabled + 'SMT Host state unknown' Kernel runs in a VM, Host SMT state unknown + ======================== =========================================== + +References +---------- +.. [#f1] Affected Processors + https://www.intel.com/content/www/us/en/developer/topic-technology/software-security-guidance/processors-affected-consolidated-product-cpu-model.html diff --git a/Documentation/admin-guide/hw-vuln/special-register-buffer-data-sampling.rst b/Documentation/admin-guide/hw-vuln/special-register-buffer-data-sampling.rst new file mode 100644 index 000000000..966c9b329 --- /dev/null +++ b/Documentation/admin-guide/hw-vuln/special-register-buffer-data-sampling.rst @@ -0,0 +1,150 @@ +.. SPDX-License-Identifier: GPL-2.0 + +SRBDS - Special Register Buffer Data Sampling +============================================= + +SRBDS is a hardware vulnerability that allows MDS +Documentation/admin-guide/hw-vuln/mds.rst techniques to +infer values returned from special register accesses. Special register +accesses are accesses to off core registers. According to Intel's evaluation, +the special register reads that have a security expectation of privacy are +RDRAND, RDSEED and SGX EGETKEY. + +When RDRAND, RDSEED and EGETKEY instructions are used, the data is moved +to the core through the special register mechanism that is susceptible +to MDS attacks. + +Affected processors +------------------- +Core models (desktop, mobile, Xeon-E3) that implement RDRAND and/or RDSEED may +be affected. + +A processor is affected by SRBDS if its Family_Model and stepping is +in the following list, with the exception of the listed processors +exporting MDS_NO while Intel TSX is available yet not enabled. The +latter class of processors are only affected when Intel TSX is enabled +by software using TSX_CTRL_MSR otherwise they are not affected. + + ============= ============ ======== + common name Family_Model Stepping + ============= ============ ======== + IvyBridge 06_3AH All + + Haswell 06_3CH All + Haswell_L 06_45H All + Haswell_G 06_46H All + + Broadwell_G 06_47H All + Broadwell 06_3DH All + + Skylake_L 06_4EH All + Skylake 06_5EH All + + Kabylake_L 06_8EH <= 0xC + Kabylake 06_9EH <= 0xD + ============= ============ ======== + +Related CVEs +------------ + +The following CVE entry is related to this SRBDS issue: + + ============== ===== ===================================== + CVE-2020-0543 SRBDS Special Register Buffer Data Sampling + ============== ===== ===================================== + +Attack scenarios +---------------- +An unprivileged user can extract values returned from RDRAND and RDSEED +executed on another core or sibling thread using MDS techniques. + + +Mitigation mechanism +-------------------- +Intel will release microcode updates that modify the RDRAND, RDSEED, and +EGETKEY instructions to overwrite secret special register data in the shared +staging buffer before the secret data can be accessed by another logical +processor. + +During execution of the RDRAND, RDSEED, or EGETKEY instructions, off-core +accesses from other logical processors will be delayed until the special +register read is complete and the secret data in the shared staging buffer is +overwritten. + +This has three effects on performance: + +#. RDRAND, RDSEED, or EGETKEY instructions have higher latency. + +#. Executing RDRAND at the same time on multiple logical processors will be + serialized, resulting in an overall reduction in the maximum RDRAND + bandwidth. + +#. Executing RDRAND, RDSEED or EGETKEY will delay memory accesses from other + logical processors that miss their core caches, with an impact similar to + legacy locked cache-line-split accesses. + +The microcode updates provide an opt-out mechanism (RNGDS_MITG_DIS) to disable +the mitigation for RDRAND and RDSEED instructions executed outside of Intel +Software Guard Extensions (Intel SGX) enclaves. On logical processors that +disable the mitigation using this opt-out mechanism, RDRAND and RDSEED do not +take longer to execute and do not impact performance of sibling logical +processors memory accesses. The opt-out mechanism does not affect Intel SGX +enclaves (including execution of RDRAND or RDSEED inside an enclave, as well +as EGETKEY execution). + +IA32_MCU_OPT_CTRL MSR Definition +-------------------------------- +Along with the mitigation for this issue, Intel added a new thread-scope +IA32_MCU_OPT_CTRL MSR, (address 0x123). The presence of this MSR and +RNGDS_MITG_DIS (bit 0) is enumerated by CPUID.(EAX=07H,ECX=0).EDX[SRBDS_CTRL = +9]==1. This MSR is introduced through the microcode update. + +Setting IA32_MCU_OPT_CTRL[0] (RNGDS_MITG_DIS) to 1 for a logical processor +disables the mitigation for RDRAND and RDSEED executed outside of an Intel SGX +enclave on that logical processor. Opting out of the mitigation for a +particular logical processor does not affect the RDRAND and RDSEED mitigations +for other logical processors. + +Note that inside of an Intel SGX enclave, the mitigation is applied regardless +of the value of RNGDS_MITG_DS. + +Mitigation control on the kernel command line +--------------------------------------------- +The kernel command line allows control over the SRBDS mitigation at boot time +with the option "srbds=". The option for this is: + + ============= ============================================================= + off This option disables SRBDS mitigation for RDRAND and RDSEED on + affected platforms. + ============= ============================================================= + +SRBDS System Information +------------------------ +The Linux kernel provides vulnerability status information through sysfs. For +SRBDS this can be accessed by the following sysfs file: +/sys/devices/system/cpu/vulnerabilities/srbds + +The possible values contained in this file are: + + ============================== ============================================= + Not affected Processor not vulnerable + Vulnerable Processor vulnerable and mitigation disabled + Vulnerable: No microcode Processor vulnerable and microcode is missing + mitigation + Mitigation: Microcode Processor is vulnerable and mitigation is in + effect. + Mitigation: TSX disabled Processor is only vulnerable when TSX is + enabled while this system was booted with TSX + disabled. + Unknown: Dependent on + hypervisor status Running on virtual guest processor that is + affected but with no way to know if host + processor is mitigated or vulnerable. + ============================== ============================================= + +SRBDS Default mitigation +------------------------ +This new microcode serializes processor access during execution of RDRAND, +RDSEED ensures that the shared buffer is overwritten before it is released for +reuse. Use the "srbds=off" kernel command line to disable the mitigation for +RDRAND and RDSEED. diff --git a/Documentation/admin-guide/hw-vuln/spectre.rst b/Documentation/admin-guide/hw-vuln/spectre.rst new file mode 100644 index 000000000..a39bbfe95 --- /dev/null +++ b/Documentation/admin-guide/hw-vuln/spectre.rst @@ -0,0 +1,756 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Spectre Side Channels +===================== + +Spectre is a class of side channel attacks that exploit branch prediction +and speculative execution on modern CPUs to read memory, possibly +bypassing access controls. Speculative execution side channel exploits +do not modify memory but attempt to infer privileged data in the memory. + +This document covers Spectre variant 1 and Spectre variant 2. + +Affected processors +------------------- + +Speculative execution side channel methods affect a wide range of modern +high performance processors, since most modern high speed processors +use branch prediction and speculative execution. + +The following CPUs are vulnerable: + + - Intel Core, Atom, Pentium, and Xeon processors + + - AMD Phenom, EPYC, and Zen processors + + - IBM POWER and zSeries processors + + - Higher end ARM processors + + - Apple CPUs + + - Higher end MIPS CPUs + + - Likely most other high performance CPUs. Contact your CPU vendor for details. + +Whether a processor is affected or not can be read out from the Spectre +vulnerability files in sysfs. See :ref:`spectre_sys_info`. + +Related CVEs +------------ + +The following CVE entries describe Spectre variants: + + ============= ======================= ========================== + CVE-2017-5753 Bounds check bypass Spectre variant 1 + CVE-2017-5715 Branch target injection Spectre variant 2 + CVE-2019-1125 Spectre v1 swapgs Spectre variant 1 (swapgs) + ============= ======================= ========================== + +Problem +------- + +CPUs use speculative operations to improve performance. That may leave +traces of memory accesses or computations in the processor's caches, +buffers, and branch predictors. Malicious software may be able to +influence the speculative execution paths, and then use the side effects +of the speculative execution in the CPUs' caches and buffers to infer +privileged data touched during the speculative execution. + +Spectre variant 1 attacks take advantage of speculative execution of +conditional branches, while Spectre variant 2 attacks use speculative +execution of indirect branches to leak privileged memory. +See :ref:`[1] ` :ref:`[5] ` :ref:`[6] ` +:ref:`[7] ` :ref:`[10] ` :ref:`[11] `. + +Spectre variant 1 (Bounds Check Bypass) +--------------------------------------- + +The bounds check bypass attack :ref:`[2] ` takes advantage +of speculative execution that bypasses conditional branch instructions +used for memory access bounds check (e.g. checking if the index of an +array results in memory access within a valid range). This results in +memory accesses to invalid memory (with out-of-bound index) that are +done speculatively before validation checks resolve. Such speculative +memory accesses can leave side effects, creating side channels which +leak information to the attacker. + +There are some extensions of Spectre variant 1 attacks for reading data +over the network, see :ref:`[12] `. However such attacks +are difficult, low bandwidth, fragile, and are considered low risk. + +Note that, despite "Bounds Check Bypass" name, Spectre variant 1 is not +only about user-controlled array bounds checks. It can affect any +conditional checks. The kernel entry code interrupt, exception, and NMI +handlers all have conditional swapgs checks. Those may be problematic +in the context of Spectre v1, as kernel code can speculatively run with +a user GS. + +Spectre variant 2 (Branch Target Injection) +------------------------------------------- + +The branch target injection attack takes advantage of speculative +execution of indirect branches :ref:`[3] `. The indirect +branch predictors inside the processor used to guess the target of +indirect branches can be influenced by an attacker, causing gadget code +to be speculatively executed, thus exposing sensitive data touched by +the victim. The side effects left in the CPU's caches during speculative +execution can be measured to infer data values. + +.. _poison_btb: + +In Spectre variant 2 attacks, the attacker can steer speculative indirect +branches in the victim to gadget code by poisoning the branch target +buffer of a CPU used for predicting indirect branch addresses. Such +poisoning could be done by indirect branching into existing code, +with the address offset of the indirect branch under the attacker's +control. Since the branch prediction on impacted hardware does not +fully disambiguate branch address and uses the offset for prediction, +this could cause privileged code's indirect branch to jump to a gadget +code with the same offset. + +The most useful gadgets take an attacker-controlled input parameter (such +as a register value) so that the memory read can be controlled. Gadgets +without input parameters might be possible, but the attacker would have +very little control over what memory can be read, reducing the risk of +the attack revealing useful data. + +One other variant 2 attack vector is for the attacker to poison the +return stack buffer (RSB) :ref:`[13] ` to cause speculative +subroutine return instruction execution to go to a gadget. An attacker's +imbalanced subroutine call instructions might "poison" entries in the +return stack buffer which are later consumed by a victim's subroutine +return instructions. This attack can be mitigated by flushing the return +stack buffer on context switch, or virtual machine (VM) exit. + +On systems with simultaneous multi-threading (SMT), attacks are possible +from the sibling thread, as level 1 cache and branch target buffer +(BTB) may be shared between hardware threads in a CPU core. A malicious +program running on the sibling thread may influence its peer's BTB to +steer its indirect branch speculations to gadget code, and measure the +speculative execution's side effects left in level 1 cache to infer the +victim's data. + +Yet another variant 2 attack vector is for the attacker to poison the +Branch History Buffer (BHB) to speculatively steer an indirect branch +to a specific Branch Target Buffer (BTB) entry, even if the entry isn't +associated with the source address of the indirect branch. Specifically, +the BHB might be shared across privilege levels even in the presence of +Enhanced IBRS. + +Currently the only known real-world BHB attack vector is via +unprivileged eBPF. Therefore, it's highly recommended to not enable +unprivileged eBPF, especially when eIBRS is used (without retpolines). +For a full mitigation against BHB attacks, it's recommended to use +retpolines (or eIBRS combined with retpolines). + +Attack scenarios +---------------- + +The following list of attack scenarios have been anticipated, but may +not cover all possible attack vectors. + +1. A user process attacking the kernel +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Spectre variant 1 +~~~~~~~~~~~~~~~~~ + + The attacker passes a parameter to the kernel via a register or + via a known address in memory during a syscall. Such parameter may + be used later by the kernel as an index to an array or to derive + a pointer for a Spectre variant 1 attack. The index or pointer + is invalid, but bound checks are bypassed in the code branch taken + for speculative execution. This could cause privileged memory to be + accessed and leaked. + + For kernel code that has been identified where data pointers could + potentially be influenced for Spectre attacks, new "nospec" accessor + macros are used to prevent speculative loading of data. + +Spectre variant 1 (swapgs) +~~~~~~~~~~~~~~~~~~~~~~~~~~ + + An attacker can train the branch predictor to speculatively skip the + swapgs path for an interrupt or exception. If they initialize + the GS register to a user-space value, if the swapgs is speculatively + skipped, subsequent GS-related percpu accesses in the speculation + window will be done with the attacker-controlled GS value. This + could cause privileged memory to be accessed and leaked. + + For example: + + :: + + if (coming from user space) + swapgs + mov %gs:, %reg + mov (%reg), %reg1 + + When coming from user space, the CPU can speculatively skip the + swapgs, and then do a speculative percpu load using the user GS + value. So the user can speculatively force a read of any kernel + value. If a gadget exists which uses the percpu value as an address + in another load/store, then the contents of the kernel value may + become visible via an L1 side channel attack. + + A similar attack exists when coming from kernel space. The CPU can + speculatively do the swapgs, causing the user GS to get used for the + rest of the speculative window. + +Spectre variant 2 +~~~~~~~~~~~~~~~~~ + + A spectre variant 2 attacker can :ref:`poison ` the branch + target buffer (BTB) before issuing syscall to launch an attack. + After entering the kernel, the kernel could use the poisoned branch + target buffer on indirect jump and jump to gadget code in speculative + execution. + + If an attacker tries to control the memory addresses leaked during + speculative execution, he would also need to pass a parameter to the + gadget, either through a register or a known address in memory. After + the gadget has executed, he can measure the side effect. + + The kernel can protect itself against consuming poisoned branch + target buffer entries by using return trampolines (also known as + "retpoline") :ref:`[3] ` :ref:`[9] ` for all + indirect branches. Return trampolines trap speculative execution paths + to prevent jumping to gadget code during speculative execution. + x86 CPUs with Enhanced Indirect Branch Restricted Speculation + (Enhanced IBRS) available in hardware should use the feature to + mitigate Spectre variant 2 instead of retpoline. Enhanced IBRS is + more efficient than retpoline. + + There may be gadget code in firmware which could be exploited with + Spectre variant 2 attack by a rogue user process. To mitigate such + attacks on x86, Indirect Branch Restricted Speculation (IBRS) feature + is turned on before the kernel invokes any firmware code. + +2. A user process attacking another user process +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + A malicious user process can try to attack another user process, + either via a context switch on the same hardware thread, or from the + sibling hyperthread sharing a physical processor core on simultaneous + multi-threading (SMT) system. + + Spectre variant 1 attacks generally require passing parameters + between the processes, which needs a data passing relationship, such + as remote procedure calls (RPC). Those parameters are used in gadget + code to derive invalid data pointers accessing privileged memory in + the attacked process. + + Spectre variant 2 attacks can be launched from a rogue process by + :ref:`poisoning ` the branch target buffer. This can + influence the indirect branch targets for a victim process that either + runs later on the same hardware thread, or running concurrently on + a sibling hardware thread sharing the same physical core. + + A user process can protect itself against Spectre variant 2 attacks + by using the prctl() syscall to disable indirect branch speculation + for itself. An administrator can also cordon off an unsafe process + from polluting the branch target buffer by disabling the process's + indirect branch speculation. This comes with a performance cost + from not using indirect branch speculation and clearing the branch + target buffer. When SMT is enabled on x86, for a process that has + indirect branch speculation disabled, Single Threaded Indirect Branch + Predictors (STIBP) :ref:`[4] ` are turned on to prevent the + sibling thread from controlling branch target buffer. In addition, + the Indirect Branch Prediction Barrier (IBPB) is issued to clear the + branch target buffer when context switching to and from such process. + + On x86, the return stack buffer is stuffed on context switch. + This prevents the branch target buffer from being used for branch + prediction when the return stack buffer underflows while switching to + a deeper call stack. Any poisoned entries in the return stack buffer + left by the previous process will also be cleared. + + User programs should use address space randomization to make attacks + more difficult (Set /proc/sys/kernel/randomize_va_space = 1 or 2). + +3. A virtualized guest attacking the host +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + The attack mechanism is similar to how user processes attack the + kernel. The kernel is entered via hyper-calls or other virtualization + exit paths. + + For Spectre variant 1 attacks, rogue guests can pass parameters + (e.g. in registers) via hyper-calls to derive invalid pointers to + speculate into privileged memory after entering the kernel. For places + where such kernel code has been identified, nospec accessor macros + are used to stop speculative memory access. + + For Spectre variant 2 attacks, rogue guests can :ref:`poison + ` the branch target buffer or return stack buffer, causing + the kernel to jump to gadget code in the speculative execution paths. + + To mitigate variant 2, the host kernel can use return trampolines + for indirect branches to bypass the poisoned branch target buffer, + and flushing the return stack buffer on VM exit. This prevents rogue + guests from affecting indirect branching in the host kernel. + + To protect host processes from rogue guests, host processes can have + indirect branch speculation disabled via prctl(). The branch target + buffer is cleared before context switching to such processes. + +4. A virtualized guest attacking other guest +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + A rogue guest may attack another guest to get data accessible by the + other guest. + + Spectre variant 1 attacks are possible if parameters can be passed + between guests. This may be done via mechanisms such as shared memory + or message passing. Such parameters could be used to derive data + pointers to privileged data in guest. The privileged data could be + accessed by gadget code in the victim's speculation paths. + + Spectre variant 2 attacks can be launched from a rogue guest by + :ref:`poisoning ` the branch target buffer or the return + stack buffer. Such poisoned entries could be used to influence + speculation execution paths in the victim guest. + + Linux kernel mitigates attacks to other guests running in the same + CPU hardware thread by flushing the return stack buffer on VM exit, + and clearing the branch target buffer before switching to a new guest. + + If SMT is used, Spectre variant 2 attacks from an untrusted guest + in the sibling hyperthread can be mitigated by the administrator, + by turning off the unsafe guest's indirect branch speculation via + prctl(). A guest can also protect itself by turning on microcode + based mitigations (such as IBPB or STIBP on x86) within the guest. + +.. _spectre_sys_info: + +Spectre system information +-------------------------- + +The Linux kernel provides a sysfs interface to enumerate the current +mitigation status of the system for Spectre: whether the system is +vulnerable, and which mitigations are active. + +The sysfs file showing Spectre variant 1 mitigation status is: + + /sys/devices/system/cpu/vulnerabilities/spectre_v1 + +The possible values in this file are: + + .. list-table:: + + * - 'Not affected' + - The processor is not vulnerable. + * - 'Vulnerable: __user pointer sanitization and usercopy barriers only; no swapgs barriers' + - The swapgs protections are disabled; otherwise it has + protection in the kernel on a case by case base with explicit + pointer sanitation and usercopy LFENCE barriers. + * - 'Mitigation: usercopy/swapgs barriers and __user pointer sanitization' + - Protection in the kernel on a case by case base with explicit + pointer sanitation, usercopy LFENCE barriers, and swapgs LFENCE + barriers. + +However, the protections are put in place on a case by case basis, +and there is no guarantee that all possible attack vectors for Spectre +variant 1 are covered. + +The spectre_v2 kernel file reports if the kernel has been compiled with +retpoline mitigation or if the CPU has hardware mitigation, and if the +CPU has support for additional process-specific mitigation. + +This file also reports CPU features enabled by microcode to mitigate +attack between user processes: + +1. Indirect Branch Prediction Barrier (IBPB) to add additional + isolation between processes of different users. +2. Single Thread Indirect Branch Predictors (STIBP) to add additional + isolation between CPU threads running on the same core. + +These CPU features may impact performance when used and can be enabled +per process on a case-by-case base. + +The sysfs file showing Spectre variant 2 mitigation status is: + + /sys/devices/system/cpu/vulnerabilities/spectre_v2 + +The possible values in this file are: + + - Kernel status: + + ======================================== ================================= + 'Not affected' The processor is not vulnerable + 'Mitigation: None' Vulnerable, no mitigation + 'Mitigation: Retpolines' Use Retpoline thunks + 'Mitigation: LFENCE' Use LFENCE instructions + 'Mitigation: Enhanced IBRS' Hardware-focused mitigation + 'Mitigation: Enhanced IBRS + Retpolines' Hardware-focused + Retpolines + 'Mitigation: Enhanced IBRS + LFENCE' Hardware-focused + LFENCE + ======================================== ================================= + + - Firmware status: Show if Indirect Branch Restricted Speculation (IBRS) is + used to protect against Spectre variant 2 attacks when calling firmware (x86 only). + + ========== ============================================================= + 'IBRS_FW' Protection against user program attacks when calling firmware + ========== ============================================================= + + - Indirect branch prediction barrier (IBPB) status for protection between + processes of different users. This feature can be controlled through + prctl() per process, or through kernel command line options. This is + an x86 only feature. For more details see below. + + =================== ======================================================== + 'IBPB: disabled' IBPB unused + 'IBPB: always-on' Use IBPB on all tasks + 'IBPB: conditional' Use IBPB on SECCOMP or indirect branch restricted tasks + =================== ======================================================== + + - Single threaded indirect branch prediction (STIBP) status for protection + between different hyper threads. This feature can be controlled through + prctl per process, or through kernel command line options. This is x86 + only feature. For more details see below. + + ==================== ======================================================== + 'STIBP: disabled' STIBP unused + 'STIBP: forced' Use STIBP on all tasks + 'STIBP: conditional' Use STIBP on SECCOMP or indirect branch restricted tasks + ==================== ======================================================== + + - Return stack buffer (RSB) protection status: + + ============= =========================================== + 'RSB filling' Protection of RSB on context switch enabled + ============= =========================================== + + - EIBRS Post-barrier Return Stack Buffer (PBRSB) protection status: + + =========================== ======================================================= + 'PBRSB-eIBRS: SW sequence' CPU is affected and protection of RSB on VMEXIT enabled + 'PBRSB-eIBRS: Vulnerable' CPU is vulnerable + 'PBRSB-eIBRS: Not affected' CPU is not affected by PBRSB + =========================== ======================================================= + +Full mitigation might require a microcode update from the CPU +vendor. When the necessary microcode is not available, the kernel will +report vulnerability. + +Turning on mitigation for Spectre variant 1 and Spectre variant 2 +----------------------------------------------------------------- + +1. Kernel mitigation +^^^^^^^^^^^^^^^^^^^^ + +Spectre variant 1 +~~~~~~~~~~~~~~~~~ + + For the Spectre variant 1, vulnerable kernel code (as determined + by code audit or scanning tools) is annotated on a case by case + basis to use nospec accessor macros for bounds clipping :ref:`[2] + ` to avoid any usable disclosure gadgets. However, it may + not cover all attack vectors for Spectre variant 1. + + Copy-from-user code has an LFENCE barrier to prevent the access_ok() + check from being mis-speculated. The barrier is done by the + barrier_nospec() macro. + + For the swapgs variant of Spectre variant 1, LFENCE barriers are + added to interrupt, exception and NMI entry where needed. These + barriers are done by the FENCE_SWAPGS_KERNEL_ENTRY and + FENCE_SWAPGS_USER_ENTRY macros. + +Spectre variant 2 +~~~~~~~~~~~~~~~~~ + + For Spectre variant 2 mitigation, the compiler turns indirect calls or + jumps in the kernel into equivalent return trampolines (retpolines) + :ref:`[3] ` :ref:`[9] ` to go to the target + addresses. Speculative execution paths under retpolines are trapped + in an infinite loop to prevent any speculative execution jumping to + a gadget. + + To turn on retpoline mitigation on a vulnerable CPU, the kernel + needs to be compiled with a gcc compiler that supports the + -mindirect-branch=thunk-extern -mindirect-branch-register options. + If the kernel is compiled with a Clang compiler, the compiler needs + to support -mretpoline-external-thunk option. The kernel config + CONFIG_RETPOLINE needs to be turned on, and the CPU needs to run with + the latest updated microcode. + + On Intel Skylake-era systems the mitigation covers most, but not all, + cases. See :ref:`[3] ` for more details. + + On CPUs with hardware mitigation for Spectre variant 2 (e.g. IBRS + or enhanced IBRS on x86), retpoline is automatically disabled at run time. + + Systems which support enhanced IBRS (eIBRS) enable IBRS protection once at + boot, by setting the IBRS bit, and they're automatically protected against + Spectre v2 variant attacks, including cross-thread branch target injections + on SMT systems (STIBP). In other words, eIBRS enables STIBP too. + + Legacy IBRS systems clear the IBRS bit on exit to userspace and + therefore explicitly enable STIBP for that + + The retpoline mitigation is turned on by default on vulnerable + CPUs. It can be forced on or off by the administrator + via the kernel command line and sysfs control files. See + :ref:`spectre_mitigation_control_command_line`. + + On x86, indirect branch restricted speculation is turned on by default + before invoking any firmware code to prevent Spectre variant 2 exploits + using the firmware. + + Using kernel address space randomization (CONFIG_RANDOMIZE_BASE=y + and CONFIG_SLAB_FREELIST_RANDOM=y in the kernel configuration) makes + attacks on the kernel generally more difficult. + +2. User program mitigation +^^^^^^^^^^^^^^^^^^^^^^^^^^ + + User programs can mitigate Spectre variant 1 using LFENCE or "bounds + clipping". For more details see :ref:`[2] `. + + For Spectre variant 2 mitigation, individual user programs + can be compiled with return trampolines for indirect branches. + This protects them from consuming poisoned entries in the branch + target buffer left by malicious software. + + On legacy IBRS systems, at return to userspace, implicit STIBP is disabled + because the kernel clears the IBRS bit. In this case, the userspace programs + can disable indirect branch speculation via prctl() (See + :ref:`Documentation/userspace-api/spec_ctrl.rst `). + On x86, this will turn on STIBP to guard against attacks from the + sibling thread when the user program is running, and use IBPB to + flush the branch target buffer when switching to/from the program. + + Restricting indirect branch speculation on a user program will + also prevent the program from launching a variant 2 attack + on x86. Administrators can change that behavior via the kernel + command line and sysfs control files. + See :ref:`spectre_mitigation_control_command_line`. + + Programs that disable their indirect branch speculation will have + more overhead and run slower. + + User programs should use address space randomization + (/proc/sys/kernel/randomize_va_space = 1 or 2) to make attacks more + difficult. + +3. VM mitigation +^^^^^^^^^^^^^^^^ + + Within the kernel, Spectre variant 1 attacks from rogue guests are + mitigated on a case by case basis in VM exit paths. Vulnerable code + uses nospec accessor macros for "bounds clipping", to avoid any + usable disclosure gadgets. However, this may not cover all variant + 1 attack vectors. + + For Spectre variant 2 attacks from rogue guests to the kernel, the + Linux kernel uses retpoline or Enhanced IBRS to prevent consumption of + poisoned entries in branch target buffer left by rogue guests. It also + flushes the return stack buffer on every VM exit to prevent a return + stack buffer underflow so poisoned branch target buffer could be used, + or attacker guests leaving poisoned entries in the return stack buffer. + + To mitigate guest-to-guest attacks in the same CPU hardware thread, + the branch target buffer is sanitized by flushing before switching + to a new guest on a CPU. + + The above mitigations are turned on by default on vulnerable CPUs. + + To mitigate guest-to-guest attacks from sibling thread when SMT is + in use, an untrusted guest running in the sibling thread can have + its indirect branch speculation disabled by administrator via prctl(). + + The kernel also allows guests to use any microcode based mitigation + they choose to use (such as IBPB or STIBP on x86) to protect themselves. + +.. _spectre_mitigation_control_command_line: + +Mitigation control on the kernel command line +--------------------------------------------- + +Spectre variant 2 mitigation can be disabled or force enabled at the +kernel command line. + + nospectre_v1 + + [X86,PPC] Disable mitigations for Spectre Variant 1 + (bounds check bypass). With this option data leaks are + possible in the system. + + nospectre_v2 + + [X86] Disable all mitigations for the Spectre variant 2 + (indirect branch prediction) vulnerability. System may + allow data leaks with this option, which is equivalent + to spectre_v2=off. + + + spectre_v2= + + [X86] Control mitigation of Spectre variant 2 + (indirect branch speculation) vulnerability. + The default operation protects the kernel from + user space attacks. + + on + unconditionally enable, implies + spectre_v2_user=on + off + unconditionally disable, implies + spectre_v2_user=off + auto + kernel detects whether your CPU model is + vulnerable + + Selecting 'on' will, and 'auto' may, choose a + mitigation method at run time according to the + CPU, the available microcode, the setting of the + CONFIG_RETPOLINE configuration option, and the + compiler with which the kernel was built. + + Selecting 'on' will also enable the mitigation + against user space to user space task attacks. + + Selecting 'off' will disable both the kernel and + the user space protections. + + Specific mitigations can also be selected manually: + + retpoline auto pick between generic,lfence + retpoline,generic Retpolines + retpoline,lfence LFENCE; indirect branch + retpoline,amd alias for retpoline,lfence + eibrs enhanced IBRS + eibrs,retpoline enhanced IBRS + Retpolines + eibrs,lfence enhanced IBRS + LFENCE + ibrs use IBRS to protect kernel + + Not specifying this option is equivalent to + spectre_v2=auto. + + In general the kernel by default selects + reasonable mitigations for the current CPU. To + disable Spectre variant 2 mitigations, boot with + spectre_v2=off. Spectre variant 1 mitigations + cannot be disabled. + +For spectre_v2_user see Documentation/admin-guide/kernel-parameters.txt + +Mitigation selection guide +-------------------------- + +1. Trusted userspace +^^^^^^^^^^^^^^^^^^^^ + + If all userspace applications are from trusted sources and do not + execute externally supplied untrusted code, then the mitigations can + be disabled. + +2. Protect sensitive programs +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + For security-sensitive programs that have secrets (e.g. crypto + keys), protection against Spectre variant 2 can be put in place by + disabling indirect branch speculation when the program is running + (See :ref:`Documentation/userspace-api/spec_ctrl.rst `). + +3. Sandbox untrusted programs +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + Untrusted programs that could be a source of attacks can be cordoned + off by disabling their indirect branch speculation when they are run + (See :ref:`Documentation/userspace-api/spec_ctrl.rst `). + This prevents untrusted programs from polluting the branch target + buffer. This behavior can be changed via the kernel command line + and sysfs control files. See + :ref:`spectre_mitigation_control_command_line`. + +3. High security mode +^^^^^^^^^^^^^^^^^^^^^ + + All Spectre variant 2 mitigations can be forced on + at boot time for all programs (See the "on" option in + :ref:`spectre_mitigation_control_command_line`). This will add + overhead as indirect branch speculations for all programs will be + restricted. + + On x86, branch target buffer will be flushed with IBPB when switching + to a new program. STIBP is left on all the time to protect programs + against variant 2 attacks originating from programs running on + sibling threads. + + Alternatively, STIBP can be used only when running programs + whose indirect branch speculation is explicitly disabled, + while IBPB is still used all the time when switching to a new + program to clear the branch target buffer (See "ibpb" option in + :ref:`spectre_mitigation_control_command_line`). This "ibpb" option + has less performance cost than the "on" option, which leaves STIBP + on all the time. + +References on Spectre +--------------------- + +Intel white papers: + +.. _spec_ref1: + +[1] `Intel analysis of speculative execution side channels `_. + +.. _spec_ref2: + +[2] `Bounds check bypass `_. + +.. _spec_ref3: + +[3] `Deep dive: Retpoline: A branch target injection mitigation `_. + +.. _spec_ref4: + +[4] `Deep Dive: Single Thread Indirect Branch Predictors `_. + +AMD white papers: + +.. _spec_ref5: + +[5] `AMD64 technology indirect branch control extension `_. + +.. _spec_ref6: + +[6] `Software techniques for managing speculation on AMD processors `_. + +ARM white papers: + +.. _spec_ref7: + +[7] `Cache speculation side-channels `_. + +.. _spec_ref8: + +[8] `Cache speculation issues update `_. + +Google white paper: + +.. _spec_ref9: + +[9] `Retpoline: a software construct for preventing branch-target-injection `_. + +MIPS white paper: + +.. _spec_ref10: + +[10] `MIPS: response on speculative execution and side channel vulnerabilities `_. + +Academic papers: + +.. _spec_ref11: + +[11] `Spectre Attacks: Exploiting Speculative Execution `_. + +.. _spec_ref12: + +[12] `NetSpectre: Read Arbitrary Memory over Network `_. + +.. _spec_ref13: + +[13] `Spectre Returns! Speculation Attacks using the Return Stack Buffer `_. diff --git a/Documentation/admin-guide/hw-vuln/srso.rst b/Documentation/admin-guide/hw-vuln/srso.rst new file mode 100644 index 000000000..f79cb11b0 --- /dev/null +++ b/Documentation/admin-guide/hw-vuln/srso.rst @@ -0,0 +1,133 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Speculative Return Stack Overflow (SRSO) +======================================== + +This is a mitigation for the speculative return stack overflow (SRSO) +vulnerability found on AMD processors. The mechanism is by now the well +known scenario of poisoning CPU functional units - the Branch Target +Buffer (BTB) and Return Address Predictor (RAP) in this case - and then +tricking the elevated privilege domain (the kernel) into leaking +sensitive data. + +AMD CPUs predict RET instructions using a Return Address Predictor (aka +Return Address Stack/Return Stack Buffer). In some cases, a non-architectural +CALL instruction (i.e., an instruction predicted to be a CALL but is +not actually a CALL) can create an entry in the RAP which may be used +to predict the target of a subsequent RET instruction. + +The specific circumstances that lead to this varies by microarchitecture +but the concern is that an attacker can mis-train the CPU BTB to predict +non-architectural CALL instructions in kernel space and use this to +control the speculative target of a subsequent kernel RET, potentially +leading to information disclosure via a speculative side-channel. + +The issue is tracked under CVE-2023-20569. + +Affected processors +------------------- + +AMD Zen, generations 1-4. That is, all families 0x17 and 0x19. Older +processors have not been investigated. + +System information and options +------------------------------ + +First of all, it is required that the latest microcode be loaded for +mitigations to be effective. + +The sysfs file showing SRSO mitigation status is: + + /sys/devices/system/cpu/vulnerabilities/spec_rstack_overflow + +The possible values in this file are: + + - 'Not affected' The processor is not vulnerable + + - 'Vulnerable: no microcode' The processor is vulnerable, no + microcode extending IBPB functionality + to address the vulnerability has been + applied. + + - 'Mitigation: microcode' Extended IBPB functionality microcode + patch has been applied. It does not + address User->Kernel and Guest->Host + transitions protection but it does + address User->User and VM->VM attack + vectors. + + (spec_rstack_overflow=microcode) + + - 'Mitigation: safe RET' Software-only mitigation. It complements + the extended IBPB microcode patch + functionality by addressing User->Kernel + and Guest->Host transitions protection. + + Selected by default or by + spec_rstack_overflow=safe-ret + + - 'Mitigation: IBPB' Similar protection as "safe RET" above + but employs an IBPB barrier on privilege + domain crossings (User->Kernel, + Guest->Host). + + (spec_rstack_overflow=ibpb) + + - 'Mitigation: IBPB on VMEXIT' Mitigation addressing the cloud provider + scenario - the Guest->Host transitions + only. + + (spec_rstack_overflow=ibpb-vmexit) + +In order to exploit vulnerability, an attacker needs to: + + - gain local access on the machine + + - break kASLR + + - find gadgets in the running kernel in order to use them in the exploit + + - potentially create and pin an additional workload on the sibling + thread, depending on the microarchitecture (not necessary on fam 0x19) + + - run the exploit + +Considering the performance implications of each mitigation type, the +default one is 'Mitigation: safe RET' which should take care of most +attack vectors, including the local User->Kernel one. + +As always, the user is advised to keep her/his system up-to-date by +applying software updates regularly. + +The default setting will be reevaluated when needed and especially when +new attack vectors appear. + +As one can surmise, 'Mitigation: safe RET' does come at the cost of some +performance depending on the workload. If one trusts her/his userspace +and does not want to suffer the performance impact, one can always +disable the mitigation with spec_rstack_overflow=off. + +Similarly, 'Mitigation: IBPB' is another full mitigation type employing +an indrect branch prediction barrier after having applied the required +microcode patch for one's system. This mitigation comes also at +a performance cost. + +Mitigation: safe RET +-------------------- + +The mitigation works by ensuring all RET instructions speculate to +a controlled location, similar to how speculation is controlled in the +retpoline sequence. To accomplish this, the __x86_return_thunk forces +the CPU to mispredict every function return using a 'safe return' +sequence. + +To ensure the safety of this mitigation, the kernel must ensure that the +safe return sequence is itself free from attacker interference. In Zen3 +and Zen4, this is accomplished by creating a BTB alias between the +untraining function srso_alias_untrain_ret() and the safe return +function srso_alias_safe_ret() which results in evicting a potentially +poisoned BTB entry and using that safe one for all function returns. + +In older Zen1 and Zen2, this is accomplished using a reinterpretation +technique similar to Retbleed one: srso_untrain_ret() and +srso_safe_ret(). diff --git a/Documentation/admin-guide/hw-vuln/tsx_async_abort.rst b/Documentation/admin-guide/hw-vuln/tsx_async_abort.rst new file mode 100644 index 000000000..76673affd --- /dev/null +++ b/Documentation/admin-guide/hw-vuln/tsx_async_abort.rst @@ -0,0 +1,277 @@ +.. SPDX-License-Identifier: GPL-2.0 + +TAA - TSX Asynchronous Abort +====================================== + +TAA is a hardware vulnerability that allows unprivileged speculative access to +data which is available in various CPU internal buffers by using asynchronous +aborts within an Intel TSX transactional region. + +Affected processors +------------------- + +This vulnerability only affects Intel processors that support Intel +Transactional Synchronization Extensions (TSX) when the TAA_NO bit (bit 8) +is 0 in the IA32_ARCH_CAPABILITIES MSR. On processors where the MDS_NO bit +(bit 5) is 0 in the IA32_ARCH_CAPABILITIES MSR, the existing MDS mitigations +also mitigate against TAA. + +Whether a processor is affected or not can be read out from the TAA +vulnerability file in sysfs. See :ref:`tsx_async_abort_sys_info`. + +Related CVEs +------------ + +The following CVE entry is related to this TAA issue: + + ============== ===== =================================================== + CVE-2019-11135 TAA TSX Asynchronous Abort (TAA) condition on some + microprocessors utilizing speculative execution may + allow an authenticated user to potentially enable + information disclosure via a side channel with + local access. + ============== ===== =================================================== + +Problem +------- + +When performing store, load or L1 refill operations, processors write +data into temporary microarchitectural structures (buffers). The data in +those buffers can be forwarded to load operations as an optimization. + +Intel TSX is an extension to the x86 instruction set architecture that adds +hardware transactional memory support to improve performance of multi-threaded +software. TSX lets the processor expose and exploit concurrency hidden in an +application due to dynamically avoiding unnecessary synchronization. + +TSX supports atomic memory transactions that are either committed (success) or +aborted. During an abort, operations that happened within the transactional region +are rolled back. An asynchronous abort takes place, among other options, when a +different thread accesses a cache line that is also used within the transactional +region when that access might lead to a data race. + +Immediately after an uncompleted asynchronous abort, certain speculatively +executed loads may read data from those internal buffers and pass it to dependent +operations. This can be then used to infer the value via a cache side channel +attack. + +Because the buffers are potentially shared between Hyper-Threads cross +Hyper-Thread attacks are possible. + +The victim of a malicious actor does not need to make use of TSX. Only the +attacker needs to begin a TSX transaction and raise an asynchronous abort +which in turn potentially leaks data stored in the buffers. + +More detailed technical information is available in the TAA specific x86 +architecture section: :ref:`Documentation/x86/tsx_async_abort.rst `. + + +Attack scenarios +---------------- + +Attacks against the TAA vulnerability can be implemented from unprivileged +applications running on hosts or guests. + +As for MDS, the attacker has no control over the memory addresses that can +be leaked. Only the victim is responsible for bringing data to the CPU. As +a result, the malicious actor has to sample as much data as possible and +then postprocess it to try to infer any useful information from it. + +A potential attacker only has read access to the data. Also, there is no direct +privilege escalation by using this technique. + + +.. _tsx_async_abort_sys_info: + +TAA system information +----------------------- + +The Linux kernel provides a sysfs interface to enumerate the current TAA status +of mitigated systems. The relevant sysfs file is: + +/sys/devices/system/cpu/vulnerabilities/tsx_async_abort + +The possible values in this file are: + +.. list-table:: + + * - 'Vulnerable' + - The CPU is affected by this vulnerability and the microcode and kernel mitigation are not applied. + * - 'Vulnerable: Clear CPU buffers attempted, no microcode' + - The system tries to clear the buffers but the microcode might not support the operation. + * - 'Mitigation: Clear CPU buffers' + - The microcode has been updated to clear the buffers. TSX is still enabled. + * - 'Mitigation: TSX disabled' + - TSX is disabled. + * - 'Not affected' + - The CPU is not affected by this issue. + +.. _ucode_needed: + +Best effort mitigation mode +^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +If the processor is vulnerable, but the availability of the microcode-based +mitigation mechanism is not advertised via CPUID the kernel selects a best +effort mitigation mode. This mode invokes the mitigation instructions +without a guarantee that they clear the CPU buffers. + +This is done to address virtualization scenarios where the host has the +microcode update applied, but the hypervisor is not yet updated to expose the +CPUID to the guest. If the host has updated microcode the protection takes +effect; otherwise a few CPU cycles are wasted pointlessly. + +The state in the tsx_async_abort sysfs file reflects this situation +accordingly. + + +Mitigation mechanism +-------------------- + +The kernel detects the affected CPUs and the presence of the microcode which is +required. If a CPU is affected and the microcode is available, then the kernel +enables the mitigation by default. + + +The mitigation can be controlled at boot time via a kernel command line option. +See :ref:`taa_mitigation_control_command_line`. + +Virtualization mitigation +^^^^^^^^^^^^^^^^^^^^^^^^^ + +Affected systems where the host has TAA microcode and TAA is mitigated by +having disabled TSX previously, are not vulnerable regardless of the status +of the VMs. + +In all other cases, if the host either does not have the TAA microcode or +the kernel is not mitigated, the system might be vulnerable. + + +.. _taa_mitigation_control_command_line: + +Mitigation control on the kernel command line +--------------------------------------------- + +The kernel command line allows to control the TAA mitigations at boot time with +the option "tsx_async_abort=". The valid arguments for this option are: + + ============ ============================================================= + off This option disables the TAA mitigation on affected platforms. + If the system has TSX enabled (see next parameter) and the CPU + is affected, the system is vulnerable. + + full TAA mitigation is enabled. If TSX is enabled, on an affected + system it will clear CPU buffers on ring transitions. On + systems which are MDS-affected and deploy MDS mitigation, + TAA is also mitigated. Specifying this option on those + systems will have no effect. + + full,nosmt The same as tsx_async_abort=full, with SMT disabled on + vulnerable CPUs that have TSX enabled. This is the complete + mitigation. When TSX is disabled, SMT is not disabled because + CPU is not vulnerable to cross-thread TAA attacks. + ============ ============================================================= + +Not specifying this option is equivalent to "tsx_async_abort=full". For +processors that are affected by both TAA and MDS, specifying just +"tsx_async_abort=off" without an accompanying "mds=off" will have no +effect as the same mitigation is used for both vulnerabilities. + +The kernel command line also allows to control the TSX feature using the +parameter "tsx=" on CPUs which support TSX control. MSR_IA32_TSX_CTRL is used +to control the TSX feature and the enumeration of the TSX feature bits (RTM +and HLE) in CPUID. + +The valid options are: + + ============ ============================================================= + off Disables TSX on the system. + + Note that this option takes effect only on newer CPUs which are + not vulnerable to MDS, i.e., have MSR_IA32_ARCH_CAPABILITIES.MDS_NO=1 + and which get the new IA32_TSX_CTRL MSR through a microcode + update. This new MSR allows for the reliable deactivation of + the TSX functionality. + + on Enables TSX. + + Although there are mitigations for all known security + vulnerabilities, TSX has been known to be an accelerator for + several previous speculation-related CVEs, and so there may be + unknown security risks associated with leaving it enabled. + + auto Disables TSX if X86_BUG_TAA is present, otherwise enables TSX + on the system. + ============ ============================================================= + +Not specifying this option is equivalent to "tsx=off". + +The following combinations of the "tsx_async_abort" and "tsx" are possible. For +affected platforms tsx=auto is equivalent to tsx=off and the result will be: + + ========= ========================== ========================================= + tsx=on tsx_async_abort=full The system will use VERW to clear CPU + buffers. Cross-thread attacks are still + possible on SMT machines. + tsx=on tsx_async_abort=full,nosmt As above, cross-thread attacks on SMT + mitigated. + tsx=on tsx_async_abort=off The system is vulnerable. + tsx=off tsx_async_abort=full TSX might be disabled if microcode + provides a TSX control MSR. If so, + system is not vulnerable. + tsx=off tsx_async_abort=full,nosmt Ditto + tsx=off tsx_async_abort=off ditto + ========= ========================== ========================================= + + +For unaffected platforms "tsx=on" and "tsx_async_abort=full" does not clear CPU +buffers. For platforms without TSX control (MSR_IA32_ARCH_CAPABILITIES.MDS_NO=0) +"tsx" command line argument has no effect. + +For the affected platforms below table indicates the mitigation status for the +combinations of CPUID bit MD_CLEAR and IA32_ARCH_CAPABILITIES MSR bits MDS_NO +and TSX_CTRL_MSR. + + ======= ========= ============= ======================================== + MDS_NO MD_CLEAR TSX_CTRL_MSR Status + ======= ========= ============= ======================================== + 0 0 0 Vulnerable (needs microcode) + 0 1 0 MDS and TAA mitigated via VERW + 1 1 0 MDS fixed, TAA vulnerable if TSX enabled + because MD_CLEAR has no meaning and + VERW is not guaranteed to clear buffers + 1 X 1 MDS fixed, TAA can be mitigated by + VERW or TSX_CTRL_MSR + ======= ========= ============= ======================================== + +Mitigation selection guide +-------------------------- + +1. Trusted userspace and guests +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +If all user space applications are from a trusted source and do not execute +untrusted code which is supplied externally, then the mitigation can be +disabled. The same applies to virtualized environments with trusted guests. + + +2. Untrusted userspace and guests +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +If there are untrusted applications or guests on the system, enabling TSX +might allow a malicious actor to leak data from the host or from other +processes running on the same physical core. + +If the microcode is available and the TSX is disabled on the host, attacks +are prevented in a virtualized environment as well, even if the VMs do not +explicitly enable the mitigation. + + +.. _taa_default_mitigations: + +Default mitigations +------------------- + +The kernel's default action for vulnerable processors is: + + - Deploy TSX disable mitigation (tsx_async_abort=full tsx=off). -- cgit v1.2.3