From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- .../bindings/pinctrl/sunplus,sp7021-pinctrl.yaml | 377 +++++++++++++++++++++ 1 file changed, 377 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml (limited to 'Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml') diff --git a/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml new file mode 100644 index 000000000..347061eec --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml @@ -0,0 +1,377 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) Sunplus Co., Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/sunplus,sp7021-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sunplus SP7021 Pin Controller + +maintainers: + - Dvorkin Dmitry + - Wells Lu + +description: | + The Sunplus SP7021 pin controller is used to control SoC pins. Please + refer to pinctrl-bindings.txt in this directory for details of the common + pinctrl bindings used by client devices. + + SP7021 has 99 digital GPIO pins which are numbered from GPIO 0 to 98. All + are multiplexed with some special function pins. SP7021 has 3 types of + special function pins: + + (1) function-group pins: + Ex 1 (SPI-NOR flash): + If control-field SPI_FLASH_SEL is set to 1, GPIO 83, 84, 86 and 87 + will be pins of SPI-NOR flash. If it is set to 2, GPIO 76, 78, 79 + and 81 will be pins of SPI-NOR flash. + + Ex 2 (UART_0): + If control-bit UA0_SEL is set to 1, GPIO 88 and 89 will be TX and + RX pins of UART_0 (UART channel 0). + + Ex 3 (eMMC): + If control-bit EMMC_SEL is set to 1, GPIO 72, 73, 74, 75, 76, 77, + 78, 79, 80, 81 will be pins of an eMMC device. + + Properties "function" and "groups" are used to select function-group + pins. + + (2) fully pin-mux (like phone exchange mux) pins: + GPIO 8 to 71 are 'fully pin-mux' pins. Any pins of peripherals of + SP7021 (ex: UART_1, UART_2, UART_3, UART_4, I2C_0, I2C_1, and etc.) + can be routed to any pins of fully pin-mux pins. + + Ex 1 (UART channel 1): + If control-field UA1_TX_SEL is set to 3, TX pin of UART_1 will be + routed to GPIO 10 (3 - 1 + 8 = 10). + If control-field UA1_RX_SEL is set to 4, RX pin of UART_1 will be + routed to GPIO 11 (4 - 1 + 8 = 11). + If control-field UA1_RTS_SEL is set to 5, RTS pin of UART_1 will + be routed to GPIO 12 (5 - 1 + 8 = 12). + If control-field UA1_CTS_SEL is set to 6, CTS pin of UART_1 will + be routed to GPIO 13 (6 - 1 + 8 = 13). + + Ex 2 (I2C channel 0): + If control-field I2C0_CLK_SEL is set to 20, CLK pin of I2C_0 will + be routed to GPIO 27 (20 - 1 + 8 = 27). + If control-field I2C0_DATA_SEL is set to 21, DATA pin of I2C_0 + will be routed to GPIO 28 (21 - 1 + 9 = 28). + + Totally, SP7021 has 120 peripheral pins. The peripheral pins can be + routed to any of 64 'fully pin-mux' pins. + + (3) I/O processor pins + SP7021 has a built-in I/O processor. + Any GPIO pins (GPIO 0 to 98) can be set to pins of I/O processor. + + Vendor property "sunplus,pins" is used to select "fully pin-mux" pins, + "I/O processor pins" and "digital GPIO" pins. + + The device node of pin controller of Sunplus SP7021 has following + properties. + +properties: + compatible: + const: sunplus,sp7021-pctl + + gpio-controller: true + + '#gpio-cells': + const: 2 + + reg: + items: + - description: the MOON2 registers + - description: the GPIOXT registers + - description: the FIRST registers + - description: the MOON1 registers + + reg-names: + items: + - const: moon2 + - const: gpioxt + - const: first + - const: moon1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + +patternProperties: + '-pins$': + type: object + description: | + A pinctrl node should contain at least one subnodes representing the + pins or function-pins group available on the machine. Each subnode + will list the pins it needs, and how they should be configured. + + Pinctrl node's client devices use subnodes for desired pin + configuration. Client device subnodes use below standard properties. + $ref: pinmux-node.yaml# + + properties: + sunplus,pins: + description: | + Define 'sunplus,pins' which are used by pinctrl node's client + device. + + It consists of one or more integers which represents the config + setting for corresponding pin. Each integer defines a individual + pin in which: + + Bit 32~24: defines GPIO number. Its range is 0 ~ 98. + Bit 23~16: defines types: (1) fully pin-mux pins + (2) IO processor pins + (3) digital GPIO pins + Bit 15~8: defines pins of peripherals (which are defined in + 'include/dt-binging/pinctrl/sppctl.h'). + Bit 7~0: defines types or initial-state of digital GPIO pins. + + Please use macro SPPCTL_IOPAD to define the integers for pins. + + $ref: /schemas/types.yaml#/definitions/uint32-array + + function: + description: | + Define pin-function which is used by pinctrl node's client device. + The name should be one of string in the following enumeration. + $ref: "/schemas/types.yaml#/definitions/string" + enum: [ SPI_FLASH, SPI_FLASH_4BIT, SPI_NAND, CARD0_EMMC, SD_CARD, + UA0, FPGA_IFX, HDMI_TX, LCDIF, USB0_OTG, USB1_OTG ] + + groups: + description: | + Define pin-group in a specified pin-function. + The name should be one of string in the following enumeration. + $ref: "/schemas/types.yaml#/definitions/string" + enum: [ SPI_FLASH1, SPI_FLASH2, SPI_FLASH_4BIT1, SPI_FLASH_4BIT2, + SPI_NAND, CARD0_EMMC, SD_CARD, UA0, FPGA_IFX, HDMI_TX1, + HDMI_TX2, HDMI_TX3, LCDIF, USB0_OTG, USB1_OTG ] + + sunplus,zerofunc: + description: | + This is a vendor specific property. It is used to disable pins + which are not used by pinctrl node's client device. + Some pins may be enabled by boot-loader. We can use this + property to disable them. + $ref: /schemas/types.yaml#/definitions/uint32-array + + additionalProperties: false + + allOf: + - if: + properties: + function: + enum: + - SPI_FLASH + then: + properties: + groups: + enum: + - SPI_FLASH1 + - SPI_FLASH2 + - if: + properties: + function: + enum: + - SPI_FLASH_4BIT + then: + properties: + groups: + enum: + - SPI_FLASH_4BIT1 + - SPI_FLASH_4BIT2 + - if: + properties: + function: + enum: + - SPI_NAND + then: + properties: + groups: + enum: + - SPI_NAND + - if: + properties: + function: + enum: + - CARD0_EMMC + then: + properties: + groups: + enum: + - CARD0_EMMC + - if: + properties: + function: + enum: + - SD_CARD + then: + properties: + groups: + enum: + - SD_CARD + - if: + properties: + function: + enum: + - UA0 + then: + properties: + groups: + enum: + - UA0 + - if: + properties: + function: + enum: + - FPGA_IFX + then: + properties: + groups: + enum: + - FPGA_IFX + - if: + properties: + function: + enum: + - HDMI_TX + then: + properties: + groups: + enum: + - HDMI_TX1 + - HDMI_TX2 + - HDMI_TX3 + - if: + properties: + function: + enum: + - LCDIF + then: + properties: + groups: + enum: + - LCDIF + - if: + properties: + function: + enum: + - USB0_OTG + then: + properties: + groups: + enum: + - USB0_OTG + - if: + properties: + function: + enum: + - USB1_OTG + then: + properties: + groups: + enum: + - USB1_OTG + +required: + - compatible + - reg + - reg-names + - "#gpio-cells" + - gpio-controller + - clocks + - resets + +additionalProperties: false + +allOf: + - $ref: "pinctrl.yaml#" + +examples: + - | + #include + + pinctrl@9c000100 { + compatible = "sunplus,sp7021-pctl"; + reg = <0x9c000100 0x100>, <0x9c000300 0x100>, + <0x9c0032e4 0x1c>, <0x9c000080 0x20>; + reg-names = "moon2", "gpioxt", "first", "moon1"; + gpio-controller; + #gpio-cells = <2>; + clocks = <&clkc 0x83>; + resets = <&rstc 0x73>; + + uart0-pins { + function = "UA0"; + groups = "UA0"; + }; + + spinand0-pins { + function = "SPI_NAND"; + groups = "SPI_NAND"; + }; + + uart1-pins { + sunplus,pins = < + SPPCTL_IOPAD(11, SPPCTL_PCTL_G_PMUX, MUXF_UA1_TX, 0) + SPPCTL_IOPAD(10, SPPCTL_PCTL_G_PMUX, MUXF_UA1_RX, 0) + >; + }; + + uart2-pins { + sunplus,pins = < + SPPCTL_IOPAD(20, SPPCTL_PCTL_G_PMUX, MUXF_UA1_TX, 0) + SPPCTL_IOPAD(21, SPPCTL_PCTL_G_PMUX, MUXF_UA1_RX, 0) + SPPCTL_IOPAD(22, SPPCTL_PCTL_G_PMUX, MUXF_UA1_RTS, 0) + SPPCTL_IOPAD(23, SPPCTL_PCTL_G_PMUX, MUXF_UA1_CTS, 0) + >; + }; + + emmc-pins { + function = "CARD0_EMMC"; + groups = "CARD0_EMMC"; + }; + + sdcard-pins { + function = "SD_CARD"; + groups = "SD_CARD"; + sunplus,pins = < SPPCTL_IOPAD(91, SPPCTL_PCTL_G_GPIO, 0, 0) >; + }; + + hdmi_A_tx1-pins { + function = "HDMI_TX"; + groups = "HDMI_TX1"; + }; + hdmi_A_tx2-pins { + function = "HDMI_TX"; + groups = "HDMI_TX2"; + }; + hdmi_A_tx3-pins { + function = "HDMI_TX"; + groups = "HDMI_TX3"; + }; + + ethernet-pins { + sunplus,pins = < + SPPCTL_IOPAD(49,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_CLK_OUT,0) + SPPCTL_IOPAD(44,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_MAC_SMI_MDC,0) + SPPCTL_IOPAD(43,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_MAC_SMI_MDIO,0) + SPPCTL_IOPAD(52,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXEN,0) + SPPCTL_IOPAD(50,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXD0,0) + SPPCTL_IOPAD(51,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXD1,0) + SPPCTL_IOPAD(46,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_CRSDV,0) + SPPCTL_IOPAD(47,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXD0,0) + SPPCTL_IOPAD(48,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXD1,0) + >; + sunplus,zerofunc = < + MUXF_L2SW_LED_FLASH0 + MUXF_L2SW_LED_ON0 + MUXF_L2SW_P0_MAC_RMII_RXER + >; + }; + }; +... -- cgit v1.2.3