From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- Documentation/devicetree/bindings/slimbus/bus.txt | 60 ++++++++++++++++ .../bindings/slimbus/slim-ngd-qcom-ctrl.txt | 84 ++++++++++++++++++++++ .../devicetree/bindings/slimbus/slim-qcom-ctrl.txt | 39 ++++++++++ 3 files changed, 183 insertions(+) create mode 100644 Documentation/devicetree/bindings/slimbus/bus.txt create mode 100644 Documentation/devicetree/bindings/slimbus/slim-ngd-qcom-ctrl.txt create mode 100644 Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt (limited to 'Documentation/devicetree/bindings/slimbus') diff --git a/Documentation/devicetree/bindings/slimbus/bus.txt b/Documentation/devicetree/bindings/slimbus/bus.txt new file mode 100644 index 000000000..bbe871f82 --- /dev/null +++ b/Documentation/devicetree/bindings/slimbus/bus.txt @@ -0,0 +1,60 @@ +SLIM(Serial Low Power Interchip Media Bus) bus + +SLIMbus is a 2-wire bus, and is used to communicate with peripheral +components like audio-codec. + +Required property for SLIMbus controller node: +- compatible - name of SLIMbus controller + +Child nodes: +Every SLIMbus controller node can contain zero or more child nodes +representing slave devices on the bus. Every SLIMbus slave device is +uniquely determined by the enumeration address containing 4 fields: +Manufacturer ID, Product code, Device index, and Instance value for +the device. +If child node is not present and it is instantiated after device +discovery (slave device reporting itself present). + +In some cases it may be necessary to describe non-probeable device +details such as non-standard ways of powering up a device. In +such cases, child nodes for those devices will be present as +slaves of the SLIMbus controller, as detailed below. + +Required property for SLIMbus child node if it is present: +- reg - Should be ('Device index', 'Instance ID') from SLIMbus + Enumeration Address. + Device Index Uniquely identifies multiple Devices within + a single Component. + Instance ID Is for the cases where multiple Devices of the + same type or Class are attached to the bus. + +- compatible -"slimMID,PID". The textual representation of Manufacturer ID, + Product Code, shall be in lower case hexadecimal with leading + zeroes suppressed + +Optional property for SLIMbus child node if it is present: +- slim-ifc-dev - Should be phandle to SLIMBus Interface device. + Required for devices which deal with streams. + +SLIMbus example for Qualcomm's slimbus manager component: + + slim@28080000 { + compatible = "qcom,apq8064-slim", "qcom,slim"; + reg = <0x28080000 0x2000>, + interrupts = <0 33 0>; + clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>; + clock-names = "iface", "core"; + #address-cells = <2>; + #size-cell = <0>; + + codec_ifd: ifd@0,0{ + compatible = "slim217,60"; + reg = <0 0>; + }; + + codec: wcd9310@1,0{ + compatible = "slim217,60"; + reg = <1 0>; + slim-ifc-dev = <&codec_ifd>; + }; + }; diff --git a/Documentation/devicetree/bindings/slimbus/slim-ngd-qcom-ctrl.txt b/Documentation/devicetree/bindings/slimbus/slim-ngd-qcom-ctrl.txt new file mode 100644 index 000000000..e94a2ad3a --- /dev/null +++ b/Documentation/devicetree/bindings/slimbus/slim-ngd-qcom-ctrl.txt @@ -0,0 +1,84 @@ +Qualcomm SLIMBus Non Generic Device (NGD) Controller binding + +SLIMBus NGD controller is a light-weight driver responsible for communicating +with SLIMBus slaves directly over the bus using messaging interface and +communicating with master component residing on ADSP for bandwidth and +data-channel management + +Please refer to slimbus/bus.txt for details of the common SLIMBus bindings. + +- compatible: + Usage: required + Value type: + Definition: must be "qcom,slim-ngd-v.." + must be one of the following. + "qcom,slim-ngd-v1.5.0" for MSM8996 + "qcom,slim-ngd-v2.1.0" for SDM845 + +- reg: + Usage: required + Value type: + Definition: must specify the base address and size of the controller + register space. +- dmas + Usage: required + Value type: + Definition: List of rx and tx dma channels + +- dma-names + Usage: required + Value type: + Definition: must be "rx" and "tx". + +- interrupts: + Usage: required + Value type: + Definition: must list controller IRQ. + +#address-cells + Usage: required + Value type: + Definition: Should be 1, reflecting the instance id of ngd. + +#size-cells + Usage: required + Value type: + Definition: Should be 0 + += NGD Devices +Each subnode represents an instance of NGD, must contain the following +properties: + +- reg: + Usage: required + Value type: + Definition: Should be instance id of ngd. + +#address-cells + Usage: required + Refer to slimbus/bus.txt for details of the common SLIMBus bindings. + +#size-cells + Usage: required + Refer to slimbus/bus.txt for details of the common SLIMBus bindings. + += EXAMPLE + +slim@91c0000 { + compatible = "qcom,slim-ngd-v1.5.0"; + reg = <0x91c0000 0x2c000>; + interrupts = <0 163 0>; + dmas = <&slimbam 3>, <&slimbam 4>; + dma-names = "rx", "tx"; + #address-cells = <1>; + #size-cells = <0>; + ngd@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <1>; + codec@1 { + compatible = "slim217,1a0"; + reg = <1 0>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt b/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt new file mode 100644 index 000000000..922dcb8ff --- /dev/null +++ b/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt @@ -0,0 +1,39 @@ +Qualcomm SLIMbus controller +This controller is used if applications processor driver controls SLIMbus +master component. + +Required properties: + + - #address-cells - refer to Documentation/devicetree/bindings/slimbus/bus.txt + - #size-cells - refer to Documentation/devicetree/bindings/slimbus/bus.txt + + - reg : Offset and length of the register region(s) for the device + - reg-names : Register region name(s) referenced in reg above + Required register resource entries are: + "ctrl": Physical address of controller register blocks + "slew": required for "qcom,apq8064-slim" SOC. + - compatible : should be "qcom,-slim" for SOC specific compatible + followed by "qcom,slim" for fallback. + - interrupts : Interrupt number used by this controller + - clocks : Interface and core clocks used by this SLIMbus controller + - clock-names : Required clock-name entries are: + "iface" : Interface clock for this controller + "core" : Interrupt for controller core's BAM + +Example: + + slim@28080000 { + compatible = "qcom,apq8064-slim", "qcom,slim"; + reg = <0x28080000 0x2000>, <0x80207C 4>; + reg-names = "ctrl", "slew"; + interrupts = <0 33 0>; + clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>; + clock-names = "iface", "core"; + #address-cells = <2>; + #size-cell = <0>; + + wcd9310: audio-codec@1,0{ + compatible = "slim217,60"; + reg = <1 0>; + }; + }; -- cgit v1.2.3