From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- .../devicetree/bindings/spi/nuvoton,npcm-fiu.txt | 58 ++++++++++++++++++++++ 1 file changed, 58 insertions(+) create mode 100644 Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt (limited to 'Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt') diff --git a/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt b/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt new file mode 100644 index 000000000..c63ce4cc0 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt @@ -0,0 +1,58 @@ +* Nuvoton FLASH Interface Unit (FIU) SPI Controller + +NPCM FIU supports single, dual and quad communication interface. + +The NPCM7XX supports three FIU modules, +FIU0 and FIUx supports two chip selects, +FIU3 support four chip select. + +The NPCM8XX supports four FIU modules, +FIU0 and FIUx supports two chip selects, +FIU1 and FIU3 supports four chip selects. + +Required properties: + - compatible : "nuvoton,npcm750-fiu" for Poleg NPCM7XX BMC + "nuvoton,npcm845-fiu" for Arbel NPCM8XX BMC + - #address-cells : should be 1. + - #size-cells : should be 0. + - reg : the first contains the register location and length, + the second contains the memory mapping address and length + - reg-names: Should contain the reg names "control" and "memory" + - clocks : phandle of FIU reference clock. + +Required properties in case the pins can be muxed: + - pinctrl-names : a pinctrl state named "default" must be defined. + - pinctrl-0 : phandle referencing pin configuration of the device. + +Optional property: + - nuvoton,spix-mode: enable spix-mode for an expansion bus to an ASIC or CPLD. + +Aliases: +- All the FIU controller nodes should be represented in the aliases node using + the following format 'fiu{n}' where n is a unique number for the alias. + In the NPCM7XX BMC: + fiu0 represent fiu 0 controller + fiu1 represent fiu 3 controller + fiu2 represent fiu x controller + + In the NPCM8XX BMC: + fiu0 represent fiu 0 controller + fiu1 represent fiu 1 controller + fiu2 represent fiu 3 controller + fiu3 represent fiu x controller + +Example: +fiu3: spi@c00000000 { + compatible = "nuvoton,npcm750-fiu"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfb000000 0x1000>, <0x80000000 0x10000000>; + reg-names = "control", "memory"; + clocks = <&clk NPCM7XX_CLK_AHB>; + pinctrl-names = "default"; + pinctrl-0 = <&spi3_pins>; + spi-nor@0 { + ... + }; +}; + -- cgit v1.2.3