From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- Documentation/power/energy-model.rst | 244 +++++++++++++++++++++++++++++++++++ 1 file changed, 244 insertions(+) create mode 100644 Documentation/power/energy-model.rst (limited to 'Documentation/power/energy-model.rst') diff --git a/Documentation/power/energy-model.rst b/Documentation/power/energy-model.rst new file mode 100644 index 000000000..ef341be28 --- /dev/null +++ b/Documentation/power/energy-model.rst @@ -0,0 +1,244 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================= +Energy Model of devices +======================= + +1. Overview +----------- + +The Energy Model (EM) framework serves as an interface between drivers knowing +the power consumed by devices at various performance levels, and the kernel +subsystems willing to use that information to make energy-aware decisions. + +The source of the information about the power consumed by devices can vary greatly +from one platform to another. These power costs can be estimated using +devicetree data in some cases. In others, the firmware will know better. +Alternatively, userspace might be best positioned. And so on. In order to avoid +each and every client subsystem to re-implement support for each and every +possible source of information on its own, the EM framework intervenes as an +abstraction layer which standardizes the format of power cost tables in the +kernel, hence enabling to avoid redundant work. + +The power values might be expressed in micro-Watts or in an 'abstract scale'. +Multiple subsystems might use the EM and it is up to the system integrator to +check that the requirements for the power value scale types are met. An example +can be found in the Energy-Aware Scheduler documentation +Documentation/scheduler/sched-energy.rst. For some subsystems like thermal or +powercap power values expressed in an 'abstract scale' might cause issues. +These subsystems are more interested in estimation of power used in the past, +thus the real micro-Watts might be needed. An example of these requirements can +be found in the Intelligent Power Allocation in +Documentation/driver-api/thermal/power_allocator.rst. +Kernel subsystems might implement automatic detection to check whether EM +registered devices have inconsistent scale (based on EM internal flag). +Important thing to keep in mind is that when the power values are expressed in +an 'abstract scale' deriving real energy in micro-Joules would not be possible. + +The figure below depicts an example of drivers (Arm-specific here, but the +approach is applicable to any architecture) providing power costs to the EM +framework, and interested clients reading the data from it:: + + +---------------+ +-----------------+ +---------------+ + | Thermal (IPA) | | Scheduler (EAS) | | Other | + +---------------+ +-----------------+ +---------------+ + | | em_cpu_energy() | + | | em_cpu_get() | + +---------+ | +---------+ + | | | + v v v + +---------------------+ + | Energy Model | + | Framework | + +---------------------+ + ^ ^ ^ + | | | em_dev_register_perf_domain() + +----------+ | +---------+ + | | | + +---------------+ +---------------+ +--------------+ + | cpufreq-dt | | arm_scmi | | Other | + +---------------+ +---------------+ +--------------+ + ^ ^ ^ + | | | + +--------------+ +---------------+ +--------------+ + | Device Tree | | Firmware | | ? | + +--------------+ +---------------+ +--------------+ + +In case of CPU devices the EM framework manages power cost tables per +'performance domain' in the system. A performance domain is a group of CPUs +whose performance is scaled together. Performance domains generally have a +1-to-1 mapping with CPUFreq policies. All CPUs in a performance domain are +required to have the same micro-architecture. CPUs in different performance +domains can have different micro-architectures. + + +2. Core APIs +------------ + +2.1 Config options +^^^^^^^^^^^^^^^^^^ + +CONFIG_ENERGY_MODEL must be enabled to use the EM framework. + + +2.2 Registration of performance domains +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Registration of 'advanced' EM +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The 'advanced' EM gets it's name due to the fact that the driver is allowed +to provide more precised power model. It's not limited to some implemented math +formula in the framework (like it's in 'simple' EM case). It can better reflect +the real power measurements performed for each performance state. Thus, this +registration method should be preferred in case considering EM static power +(leakage) is important. + +Drivers are expected to register performance domains into the EM framework by +calling the following API:: + + int em_dev_register_perf_domain(struct device *dev, unsigned int nr_states, + struct em_data_callback *cb, cpumask_t *cpus, bool microwatts); + +Drivers must provide a callback function returning tuples +for each performance state. The callback function provided by the driver is free +to fetch data from any relevant location (DT, firmware, ...), and by any mean +deemed necessary. Only for CPU devices, drivers must specify the CPUs of the +performance domains using cpumask. For other devices than CPUs the last +argument must be set to NULL. +The last argument 'microwatts' is important to set with correct value. Kernel +subsystems which use EM might rely on this flag to check if all EM devices use +the same scale. If there are different scales, these subsystems might decide +to return warning/error, stop working or panic. +See Section 3. for an example of driver implementing this +callback, or Section 2.4 for further documentation on this API + +Registration of EM using DT +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The EM can also be registered using OPP framework and information in DT +"operating-points-v2". Each OPP entry in DT can be extended with a property +"opp-microwatt" containing micro-Watts power value. This OPP DT property +allows a platform to register EM power values which are reflecting total power +(static + dynamic). These power values might be coming directly from +experiments and measurements. + +Registration of 'artificial' EM +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +There is an option to provide a custom callback for drivers missing detailed +knowledge about power value for each performance state. The callback +.get_cost() is optional and provides the 'cost' values used by the EAS. +This is useful for platforms that only provide information on relative +efficiency between CPU types, where one could use the information to +create an abstract power model. But even an abstract power model can +sometimes be hard to fit in, given the input power value size restrictions. +The .get_cost() allows to provide the 'cost' values which reflect the +efficiency of the CPUs. This would allow to provide EAS information which +has different relation than what would be forced by the EM internal +formulas calculating 'cost' values. To register an EM for such platform, the +driver must set the flag 'microwatts' to 0, provide .get_power() callback +and provide .get_cost() callback. The EM framework would handle such platform +properly during registration. A flag EM_PERF_DOMAIN_ARTIFICIAL is set for such +platform. Special care should be taken by other frameworks which are using EM +to test and treat this flag properly. + +Registration of 'simple' EM +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The 'simple' EM is registered using the framework helper function +cpufreq_register_em_with_opp(). It implements a power model which is tight to +math formula:: + + Power = C * V^2 * f + +The EM which is registered using this method might not reflect correctly the +physics of a real device, e.g. when static power (leakage) is important. + + +2.3 Accessing performance domains +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +There are two API functions which provide the access to the energy model: +em_cpu_get() which takes CPU id as an argument and em_pd_get() with device +pointer as an argument. It depends on the subsystem which interface it is +going to use, but in case of CPU devices both functions return the same +performance domain. + +Subsystems interested in the energy model of a CPU can retrieve it using the +em_cpu_get() API. The energy model tables are allocated once upon creation of +the performance domains, and kept in memory untouched. + +The energy consumed by a performance domain can be estimated using the +em_cpu_energy() API. The estimation is performed assuming that the schedutil +CPUfreq governor is in use in case of CPU device. Currently this calculation is +not provided for other type of devices. + +More details about the above APIs can be found in ```` +or in Section 2.4 + + +2.4 Description details of this API +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +.. kernel-doc:: include/linux/energy_model.h + :internal: + +.. kernel-doc:: kernel/power/energy_model.c + :export: + + +3. Example driver +----------------- + +The CPUFreq framework supports dedicated callback for registering +the EM for a given CPU(s) 'policy' object: cpufreq_driver::register_em(). +That callback has to be implemented properly for a given driver, +because the framework would call it at the right time during setup. +This section provides a simple example of a CPUFreq driver registering a +performance domain in the Energy Model framework using the (fake) 'foo' +protocol. The driver implements an est_power() function to be provided to the +EM framework:: + + -> drivers/cpufreq/foo_cpufreq.c + + 01 static int est_power(struct device *dev, unsigned long *mW, + 02 unsigned long *KHz) + 03 { + 04 long freq, power; + 05 + 06 /* Use the 'foo' protocol to ceil the frequency */ + 07 freq = foo_get_freq_ceil(dev, *KHz); + 08 if (freq < 0); + 09 return freq; + 10 + 11 /* Estimate the power cost for the dev at the relevant freq. */ + 12 power = foo_estimate_power(dev, freq); + 13 if (power < 0); + 14 return power; + 15 + 16 /* Return the values to the EM framework */ + 17 *mW = power; + 18 *KHz = freq; + 19 + 20 return 0; + 21 } + 22 + 23 static void foo_cpufreq_register_em(struct cpufreq_policy *policy) + 24 { + 25 struct em_data_callback em_cb = EM_DATA_CB(est_power); + 26 struct device *cpu_dev; + 27 int nr_opp; + 28 + 29 cpu_dev = get_cpu_device(cpumask_first(policy->cpus)); + 30 + 31 /* Find the number of OPPs for this policy */ + 32 nr_opp = foo_get_nr_opp(policy); + 33 + 34 /* And register the new performance domain */ + 35 em_dev_register_perf_domain(cpu_dev, nr_opp, &em_cb, policy->cpus, + 36 true); + 37 } + 38 + 39 static struct cpufreq_driver foo_cpufreq_driver = { + 40 .register_em = foo_cpufreq_register_em, + 41 }; -- cgit v1.2.3