From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- arch/arm/boot/dts/at91-sam9x60ek.dts | 702 +++++++++++++++++++++++++++++++++++ 1 file changed, 702 insertions(+) create mode 100644 arch/arm/boot/dts/at91-sam9x60ek.dts (limited to 'arch/arm/boot/dts/at91-sam9x60ek.dts') diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts new file mode 100644 index 000000000..4ba52ba11 --- /dev/null +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts @@ -0,0 +1,702 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * at91-sam9x60ek.dts - Device Tree file for Microchip SAM9X60-EK board + * + * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries + * + * Author: Sandeep Sheriker M + */ +/dts-v1/; +#include "sam9x60.dtsi" +#include + +/ { + model = "Microchip SAM9X60-EK"; + compatible = "microchip,sam9x60ek", "microchip,sam9x60", "atmel,at91sam9"; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <24000000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_key_gpio_default>; + + button-1 { + label = "SW1"; + gpios = <&pioD 18 GPIO_ACTIVE_LOW>; + linux,code = ; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + status = "okay"; /* Conflict with pwm0. */ + + red { + label = "red"; + gpios = <&pioB 11 GPIO_ACTIVE_HIGH>; + }; + + green { + label = "green"; + gpios = <&pioB 12 GPIO_ACTIVE_HIGH>; + }; + + blue { + label = "blue"; + gpios = <&pioB 13 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + vdd_1v8: fixed-regulator-vdd_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + status = "okay"; + }; + + vdd_1v15: fixed-regulator-vdd_1v15 { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + status = "okay"; + }; + + vdd1_3v3: fixed-regulator-vdd1_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDD1_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + status = "okay"; + }; + + vdd2_3v3: regulator-fixed-vdd2_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDD2_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + status = "okay"; + }; +}; + +&adc { + vddana-supply = <&vdd1_3v3>; + vref-supply = <&vdd1_3v3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>; + status = "okay"; +}; + +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can0_rx_tx>; + status = "disabled"; /* Conflict with dbgu. */ +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_rx_tx>; + status = "okay"; +}; + +&classd { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_classd_default>; + atmel,pwm-type = "diff"; + atmel,non-overlap-time = <10>; + status = "okay"; +}; + +&dbgu { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; + status = "okay"; /* Conflict with can0. */ +}; + +&ebi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ebi_addr_nand &pinctrl_ebi_data_0_7>; + status = "okay"; + + nand_controller: nand-controller { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand_oe_we &pinctrl_nand_cs &pinctrl_nand_rb>; + status = "okay"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + uboot@40000 { + label = "u-boot"; + reg = <0x40000 0xc0000>; + }; + + ubootenvred@100000 { + label = "U-Boot Env Redundant"; + reg = <0x100000 0x40000>; + }; + + ubootenv@140000 { + label = "U-Boot Env"; + reg = <0x140000 0x40000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x1f800000>; + }; + }; + }; + }; +}; + +&flx0 { + atmel,flexcom-mode = ; + status = "okay"; + + i2c0: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx0_default>; + atmel,fifo-size = <16>; + i2c-analog-filter; + i2c-digital-filter; + i2c-digital-filter-width-ns = <35>; + status = "okay"; + + eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + status = "okay"; + }; + }; +}; + +&flx4 { + atmel,flexcom-mode = ; + status = "disabled"; + + spi0: spi@400 { + compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; + clock-names = "spi_clk"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx4_default>; + atmel,fifo-size = <16>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; +}; + +&flx5 { + atmel,flexcom-mode = ; + status = "okay"; + + uart1: serial@200 { + compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + atmel,usart-mode = ; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(10))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(11))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; + clock-names = "usart"; + pinctrl-0 = <&pinctrl_flx5_default>; + pinctrl-names = "default"; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; + }; +}; + +&flx6 { + atmel,flexcom-mode = ; + status = "okay"; + + i2c1: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx6_default>; + atmel,fifo-size = <16>; + i2c-analog-filter; + i2c-digital-filter; + i2c-digital-filter-width-ns = <35>; + status = "okay"; + + gpio_exp: mcp23008@20 { + compatible = "microchip,mcp23008"; + reg = <0x20>; + }; + }; +}; + +&gpbr { + status = "okay"; +}; + +&i2s { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2s_default>; + #sound-dai-cells = <0>; + status = "disabled"; /* Conflict with QSPI. */ +}; + +&macb0 { + phy-mode = "rmii"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb0_rmii>; + status = "okay"; + + ethernet-phy@0 { + reg = <0x0>; + }; +}; + +&pinctrl { + adc { + pinctrl_adc_default: adc_default { + atmel,pins = ; + }; + + pinctrl_adtrg_default: adtrg_default { + atmel,pins = ; + }; + }; + + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = ; + }; + }; + + i2s { + pinctrl_i2s_default: i2s { + atmel,pins = + ; /* I2SMCK */ + }; + }; + + qspi { + pinctrl_qspi: qspi { + atmel,pins = + ; + }; + }; + + nand { + pinctrl_nand_oe_we: nand-oe-we-0 { + atmel,pins = + ; + }; + + pinctrl_nand_rb: nand-rb-0 { + atmel,pins = + ; + }; + + pinctrl_nand_cs: nand-cs-0 { + atmel,pins = + ; + }; + }; + + ebi { + pinctrl_ebi_data_0_7: ebi-data-lsb-0 { + atmel,pins = + ; + }; + + pinctrl_ebi_data_0_15: ebi-data-msb-0 { + atmel,pins = + ; + }; + + pinctrl_ebi_addr_nand: ebi-addr-0 { + atmel,pins = + ; + }; + }; + + flexcom { + pinctrl_flx0_default: flx0_twi { + atmel,pins = + ; + }; + + pinctrl_flx4_default: flx4_spi { + atmel,pins = + ; + }; + + pinctrl_flx5_default: flx_uart { + atmel,pins = + ; + }; + + pinctrl_flx6_default: flx6_twi { + atmel,pins = + ; + }; + }; + + classd { + pinctrl_classd_default: classd { + atmel,pins = + ; + }; + }; + + can0 { + pinctrl_can0_rx_tx: can0_rx_tx { + atmel,pins = + ; /* Enable CAN Transceivers */ + }; + }; + + can1 { + pinctrl_can1_rx_tx: can1_rx_tx { + atmel,pins = + ; /* Enable CAN Transceivers */ + }; + }; + + macb0 { + pinctrl_macb0_rmii: macb0_rmii-0 { + atmel,pins = + ; /* PB10 periph A */ + }; + }; + + pwm0 { + pinctrl_pwm0_0: pwm0_0 { + atmel,pins = ; + }; + + pinctrl_pwm0_1: pwm0_1 { + atmel,pins = ; + }; + + pinctrl_pwm0_2: pwm0_2 { + atmel,pins = ; + }; + + pinctrl_pwm0_3: pwm0_3 { + atmel,pins = ; + }; + }; + + sdmmc0 { + pinctrl_sdmmc0_default: sdmmc0 { + atmel,pins = + ; /* PA20 DAT3 periph A with pullup */ + }; + pinctrl_sdmmc0_cd: sdmmc0_cd { + atmel,pins = + ; + }; + }; + + sdmmc1 { + pinctrl_sdmmc1_default: sdmmc1 { + atmel,pins = + ; /* PA4 DAT3 periph B with pullup */ + }; + }; + + gpio_keys { + pinctrl_key_gpio_default: pinctrl_key_gpio { + atmel,pins = ; + }; + }; + + usb0 { + pinctrl_usba_vbus: usba_vbus { + atmel,pins = ; + }; + }; + + usb1 { + pinctrl_usb_default: usb_default { + atmel,pins = ; + }; + }; + + leds { + pinctrl_gpio_leds: gpio_leds { + atmel,pins = ; + }; + }; +}; /* pinctrl */ + +&pwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_0 &pinctrl_pwm0_1 &pinctrl_pwm0_2 &pinctrl_pwm0_3>; + status = "disabled"; /* Conflict with leds. */ +}; + +&sdmmc0 { + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc0_default &pinctrl_sdmmc0_cd>; + status = "okay"; + cd-gpios = <&pioA 23 GPIO_ACTIVE_LOW>; + disable-wp; +}; + +&sdmmc1 { + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc1_default>; + no-1-8-v; + non-removable; + status = "disabled"; /* Conflict with flx4. */ +}; + +&qspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi>; + status = "okay"; /* Conflict with i2s. */ + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <80000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + m25p,fast-read; + + at91bootstrap@0 { + label = "qspi: at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "qspi: bootloader"; + reg = <0x40000 0xc0000>; + }; + + bootloaderenvred@100000 { + label = "qspi: bootloader env redundant"; + reg = <0x100000 0x40000>; + }; + + bootloaderenv@140000 { + label = "qspi: bootloader env"; + reg = <0x140000 0x40000>; + }; + + dtb@180000 { + label = "qspi: device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "qspi: kernel"; + reg = <0x200000 0x600000>; + }; + }; +}; + +&rtt { + atmel,rtt-rtc-time-reg = <&gpbr 0x0>; + status = "okay"; +}; + +&shutdown_controller { + debounce-delay-us = <976>; + status = "okay"; + + input@0 { + reg = <0>; + }; +}; + +&tcb0 { + timer0: timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer1: timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; +}; + +&usb0 { + atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + status = "okay"; +}; + +&usb1 { + num-ports = <3>; + atmel,vbus-gpio = <0 + &pioD 15 GPIO_ACTIVE_HIGH + &pioD 16 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_default>; + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + -- cgit v1.2.3