From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001
From: Daniel Baumann <daniel.baumann@progress-linux.org>
Date: Sun, 7 Apr 2024 20:49:45 +0200
Subject: Adding upstream version 6.1.76.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
---
 arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts | 43 ++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts

(limited to 'arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts')

diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts b/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts
new file mode 100644
index 000000000..cd875ace1
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ */
+
+/*
+ * Module contains : i.MX287 + 128MB DDR2 + NAND + 2 x Ethernet PHY + RTC
+ */
+
+#include "imx28-eukrea-mbmx283lc.dts"
+
+/ {
+	model = "Eukrea Electromatique MBMX287LC";
+	compatible = "eukrea,mbmx287lc", "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	phy-reset-gpios = <&gpio3 27 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_cpuimx283 &hog_pins_cpuimx287>;
+	hog_pins_cpuimx287: hog-cpuimx287@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SPDIF__GPIO_3_27
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+};
-- 
cgit v1.2.3