From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/bluetooth/btusb.c | 4359 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 4359 insertions(+) create mode 100644 drivers/bluetooth/btusb.c (limited to 'drivers/bluetooth/btusb.c') diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c new file mode 100644 index 000000000..954f7f3b5 --- /dev/null +++ b/drivers/bluetooth/btusb.c @@ -0,0 +1,4359 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * + * Generic Bluetooth USB driver + * + * Copyright (C) 2005-2008 Marcel Holtmann + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "btintel.h" +#include "btbcm.h" +#include "btrtl.h" +#include "btmtk.h" + +#define VERSION "0.8" + +static bool disable_scofix; +static bool force_scofix; +static bool enable_autosuspend = IS_ENABLED(CONFIG_BT_HCIBTUSB_AUTOSUSPEND); +static bool reset = true; + +static struct usb_driver btusb_driver; + +#define BTUSB_IGNORE BIT(0) +#define BTUSB_DIGIANSWER BIT(1) +#define BTUSB_CSR BIT(2) +#define BTUSB_SNIFFER BIT(3) +#define BTUSB_BCM92035 BIT(4) +#define BTUSB_BROKEN_ISOC BIT(5) +#define BTUSB_WRONG_SCO_MTU BIT(6) +#define BTUSB_ATH3012 BIT(7) +#define BTUSB_INTEL_COMBINED BIT(8) +#define BTUSB_INTEL_BOOT BIT(9) +#define BTUSB_BCM_PATCHRAM BIT(10) +#define BTUSB_MARVELL BIT(11) +#define BTUSB_SWAVE BIT(12) +#define BTUSB_AMP BIT(13) +#define BTUSB_QCA_ROME BIT(14) +#define BTUSB_BCM_APPLE BIT(15) +#define BTUSB_REALTEK BIT(16) +#define BTUSB_BCM2045 BIT(17) +#define BTUSB_IFNUM_2 BIT(18) +#define BTUSB_CW6622 BIT(19) +#define BTUSB_MEDIATEK BIT(20) +#define BTUSB_WIDEBAND_SPEECH BIT(21) +#define BTUSB_VALID_LE_STATES BIT(22) +#define BTUSB_QCA_WCN6855 BIT(23) +#define BTUSB_INTEL_BROKEN_SHUTDOWN_LED BIT(24) +#define BTUSB_INTEL_BROKEN_INITIAL_NCMD BIT(25) +#define BTUSB_INTEL_NO_WBS_SUPPORT BIT(26) +#define BTUSB_ACTIONS_SEMI BIT(27) + +static const struct usb_device_id btusb_table[] = { + /* Generic Bluetooth USB device */ + { USB_DEVICE_INFO(0xe0, 0x01, 0x01) }, + + /* Generic Bluetooth AMP device */ + { USB_DEVICE_INFO(0xe0, 0x01, 0x04), .driver_info = BTUSB_AMP }, + + /* Generic Bluetooth USB interface */ + { USB_INTERFACE_INFO(0xe0, 0x01, 0x01) }, + + /* Apple-specific (Broadcom) devices */ + { USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01), + .driver_info = BTUSB_BCM_APPLE | BTUSB_IFNUM_2 }, + + /* MediaTek MT76x0E */ + { USB_DEVICE(0x0e8d, 0x763f) }, + + /* Broadcom SoftSailing reporting vendor specific */ + { USB_DEVICE(0x0a5c, 0x21e1) }, + + /* Apple MacBookPro 7,1 */ + { USB_DEVICE(0x05ac, 0x8213) }, + + /* Apple iMac11,1 */ + { USB_DEVICE(0x05ac, 0x8215) }, + + /* Apple MacBookPro6,2 */ + { USB_DEVICE(0x05ac, 0x8218) }, + + /* Apple MacBookAir3,1, MacBookAir3,2 */ + { USB_DEVICE(0x05ac, 0x821b) }, + + /* Apple MacBookAir4,1 */ + { USB_DEVICE(0x05ac, 0x821f) }, + + /* Apple MacBookPro8,2 */ + { USB_DEVICE(0x05ac, 0x821a) }, + + /* Apple MacMini5,1 */ + { USB_DEVICE(0x05ac, 0x8281) }, + + /* AVM BlueFRITZ! USB v2.0 */ + { USB_DEVICE(0x057c, 0x3800), .driver_info = BTUSB_SWAVE }, + + /* Bluetooth Ultraport Module from IBM */ + { USB_DEVICE(0x04bf, 0x030a) }, + + /* ALPS Modules with non-standard id */ + { USB_DEVICE(0x044e, 0x3001) }, + { USB_DEVICE(0x044e, 0x3002) }, + + /* Ericsson with non-standard id */ + { USB_DEVICE(0x0bdb, 0x1002) }, + + /* Canyon CN-BTU1 with HID interfaces */ + { USB_DEVICE(0x0c10, 0x0000) }, + + /* Broadcom BCM20702B0 (Dynex/Insignia) */ + { USB_DEVICE(0x19ff, 0x0239), .driver_info = BTUSB_BCM_PATCHRAM }, + + /* Broadcom BCM43142A0 (Foxconn/Lenovo) */ + { USB_VENDOR_AND_INTERFACE_INFO(0x105b, 0xff, 0x01, 0x01), + .driver_info = BTUSB_BCM_PATCHRAM }, + + /* Broadcom BCM920703 (HTC Vive) */ + { USB_VENDOR_AND_INTERFACE_INFO(0x0bb4, 0xff, 0x01, 0x01), + .driver_info = BTUSB_BCM_PATCHRAM }, + + /* Foxconn - Hon Hai */ + { USB_VENDOR_AND_INTERFACE_INFO(0x0489, 0xff, 0x01, 0x01), + .driver_info = BTUSB_BCM_PATCHRAM }, + + /* Lite-On Technology - Broadcom based */ + { USB_VENDOR_AND_INTERFACE_INFO(0x04ca, 0xff, 0x01, 0x01), + .driver_info = BTUSB_BCM_PATCHRAM }, + + /* Broadcom devices with vendor specific id */ + { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01), + .driver_info = BTUSB_BCM_PATCHRAM }, + + /* ASUSTek Computer - Broadcom based */ + { USB_VENDOR_AND_INTERFACE_INFO(0x0b05, 0xff, 0x01, 0x01), + .driver_info = BTUSB_BCM_PATCHRAM }, + + /* Belkin F8065bf - Broadcom based */ + { USB_VENDOR_AND_INTERFACE_INFO(0x050d, 0xff, 0x01, 0x01), + .driver_info = BTUSB_BCM_PATCHRAM }, + + /* IMC Networks - Broadcom based */ + { USB_VENDOR_AND_INTERFACE_INFO(0x13d3, 0xff, 0x01, 0x01), + .driver_info = BTUSB_BCM_PATCHRAM }, + + /* Dell Computer - Broadcom based */ + { USB_VENDOR_AND_INTERFACE_INFO(0x413c, 0xff, 0x01, 0x01), + .driver_info = BTUSB_BCM_PATCHRAM }, + + /* Toshiba Corp - Broadcom based */ + { USB_VENDOR_AND_INTERFACE_INFO(0x0930, 0xff, 0x01, 0x01), + .driver_info = BTUSB_BCM_PATCHRAM }, + + /* Intel Bluetooth USB Bootloader (RAM module) */ + { USB_DEVICE(0x8087, 0x0a5a), + .driver_info = BTUSB_INTEL_BOOT | BTUSB_BROKEN_ISOC }, + + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, btusb_table); + +static const struct usb_device_id blacklist_table[] = { + /* CSR BlueCore devices */ + { USB_DEVICE(0x0a12, 0x0001), .driver_info = BTUSB_CSR }, + + /* Broadcom BCM2033 without firmware */ + { USB_DEVICE(0x0a5c, 0x2033), .driver_info = BTUSB_IGNORE }, + + /* Broadcom BCM2045 devices */ + { USB_DEVICE(0x0a5c, 0x2045), .driver_info = BTUSB_BCM2045 }, + + /* Atheros 3011 with sflash firmware */ + { USB_DEVICE(0x0489, 0xe027), .driver_info = BTUSB_IGNORE }, + { USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE }, + { USB_DEVICE(0x04f2, 0xaff1), .driver_info = BTUSB_IGNORE }, + { USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE }, + { USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE }, + { USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE }, + { USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE }, + + /* Atheros AR9285 Malbec with sflash firmware */ + { USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE }, + + /* Atheros 3012 with sflash firmware */ + { USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe076), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe095), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x300d), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3014), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3018), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0930, 0x021c), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0930, 0x0227), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0x0036), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0x311e), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0x311f), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0x817a), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0x817b), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0xe006), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3395), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3472), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3487), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3490), .driver_info = BTUSB_ATH3012 }, + + /* Atheros AR5BBU12 with sflash firmware */ + { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, + + /* Atheros AR5BBU12 with sflash firmware */ + { USB_DEVICE(0x0489, 0xe036), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 }, + + /* QCA ROME chipset */ + { USB_DEVICE(0x0cf3, 0x535b), .driver_info = BTUSB_QCA_ROME | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0cf3, 0xe007), .driver_info = BTUSB_QCA_ROME | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0cf3, 0xe009), .driver_info = BTUSB_QCA_ROME | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0cf3, 0xe010), .driver_info = BTUSB_QCA_ROME | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0cf3, 0xe300), .driver_info = BTUSB_QCA_ROME | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0cf3, 0xe301), .driver_info = BTUSB_QCA_ROME | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0cf3, 0xe360), .driver_info = BTUSB_QCA_ROME | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0cf3, 0xe500), .driver_info = BTUSB_QCA_ROME | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0489, 0xe092), .driver_info = BTUSB_QCA_ROME | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0489, 0xe09f), .driver_info = BTUSB_QCA_ROME | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0489, 0xe0a2), .driver_info = BTUSB_QCA_ROME | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x04ca, 0x3011), .driver_info = BTUSB_QCA_ROME | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x04ca, 0x3015), .driver_info = BTUSB_QCA_ROME | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x04ca, 0x3016), .driver_info = BTUSB_QCA_ROME | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x04ca, 0x301a), .driver_info = BTUSB_QCA_ROME | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x04ca, 0x3021), .driver_info = BTUSB_QCA_ROME | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x13d3, 0x3491), .driver_info = BTUSB_QCA_ROME | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x13d3, 0x3496), .driver_info = BTUSB_QCA_ROME | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x13d3, 0x3501), .driver_info = BTUSB_QCA_ROME | + BTUSB_WIDEBAND_SPEECH }, + + /* QCA WCN6855 chipset */ + { USB_DEVICE(0x0cf3, 0xe600), .driver_info = BTUSB_QCA_WCN6855 | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x0489, 0xe0cc), .driver_info = BTUSB_QCA_WCN6855 | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x0489, 0xe0d6), .driver_info = BTUSB_QCA_WCN6855 | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x0489, 0xe0e3), .driver_info = BTUSB_QCA_WCN6855 | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x10ab, 0x9309), .driver_info = BTUSB_QCA_WCN6855 | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x10ab, 0x9409), .driver_info = BTUSB_QCA_WCN6855 | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x0489, 0xe0d0), .driver_info = BTUSB_QCA_WCN6855 | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x10ab, 0x9108), .driver_info = BTUSB_QCA_WCN6855 | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x10ab, 0x9109), .driver_info = BTUSB_QCA_WCN6855 | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x10ab, 0x9208), .driver_info = BTUSB_QCA_WCN6855 | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x10ab, 0x9209), .driver_info = BTUSB_QCA_WCN6855 | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x10ab, 0x9308), .driver_info = BTUSB_QCA_WCN6855 | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x10ab, 0x9408), .driver_info = BTUSB_QCA_WCN6855 | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x10ab, 0x9508), .driver_info = BTUSB_QCA_WCN6855 | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x10ab, 0x9509), .driver_info = BTUSB_QCA_WCN6855 | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x10ab, 0x9608), .driver_info = BTUSB_QCA_WCN6855 | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x10ab, 0x9609), .driver_info = BTUSB_QCA_WCN6855 | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x10ab, 0x9f09), .driver_info = BTUSB_QCA_WCN6855 | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x04ca, 0x3022), .driver_info = BTUSB_QCA_WCN6855 | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x0489, 0xe0c7), .driver_info = BTUSB_QCA_WCN6855 | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x0489, 0xe0c9), .driver_info = BTUSB_QCA_WCN6855 | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x0489, 0xe0ca), .driver_info = BTUSB_QCA_WCN6855 | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x0489, 0xe0cb), .driver_info = BTUSB_QCA_WCN6855 | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x0489, 0xe0ce), .driver_info = BTUSB_QCA_WCN6855 | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x0489, 0xe0de), .driver_info = BTUSB_QCA_WCN6855 | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x0489, 0xe0df), .driver_info = BTUSB_QCA_WCN6855 | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x0489, 0xe0e1), .driver_info = BTUSB_QCA_WCN6855 | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x0489, 0xe0ea), .driver_info = BTUSB_QCA_WCN6855 | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x0489, 0xe0ec), .driver_info = BTUSB_QCA_WCN6855 | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x04ca, 0x3023), .driver_info = BTUSB_QCA_WCN6855 | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x04ca, 0x3024), .driver_info = BTUSB_QCA_WCN6855 | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x04ca, 0x3a22), .driver_info = BTUSB_QCA_WCN6855 | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x04ca, 0x3a24), .driver_info = BTUSB_QCA_WCN6855 | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x04ca, 0x3a26), .driver_info = BTUSB_QCA_WCN6855 | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x04ca, 0x3a27), .driver_info = BTUSB_QCA_WCN6855 | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + + /* QCA WCN785x chipset */ + { USB_DEVICE(0x0cf3, 0xe700), .driver_info = BTUSB_QCA_WCN6855 | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + + /* Broadcom BCM2035 */ + { USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 }, + { USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU }, + { USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU }, + + /* Broadcom BCM2045 */ + { USB_DEVICE(0x0a5c, 0x2039), .driver_info = BTUSB_WRONG_SCO_MTU }, + { USB_DEVICE(0x0a5c, 0x2101), .driver_info = BTUSB_WRONG_SCO_MTU }, + + /* IBM/Lenovo ThinkPad with Broadcom chip */ + { USB_DEVICE(0x0a5c, 0x201e), .driver_info = BTUSB_WRONG_SCO_MTU }, + { USB_DEVICE(0x0a5c, 0x2110), .driver_info = BTUSB_WRONG_SCO_MTU }, + + /* HP laptop with Broadcom chip */ + { USB_DEVICE(0x03f0, 0x171d), .driver_info = BTUSB_WRONG_SCO_MTU }, + + /* Dell laptop with Broadcom chip */ + { USB_DEVICE(0x413c, 0x8126), .driver_info = BTUSB_WRONG_SCO_MTU }, + + /* Dell Wireless 370 and 410 devices */ + { USB_DEVICE(0x413c, 0x8152), .driver_info = BTUSB_WRONG_SCO_MTU }, + { USB_DEVICE(0x413c, 0x8156), .driver_info = BTUSB_WRONG_SCO_MTU }, + + /* Belkin F8T012 and F8T013 devices */ + { USB_DEVICE(0x050d, 0x0012), .driver_info = BTUSB_WRONG_SCO_MTU }, + { USB_DEVICE(0x050d, 0x0013), .driver_info = BTUSB_WRONG_SCO_MTU }, + + /* Asus WL-BTD202 device */ + { USB_DEVICE(0x0b05, 0x1715), .driver_info = BTUSB_WRONG_SCO_MTU }, + + /* Kensington Bluetooth USB adapter */ + { USB_DEVICE(0x047d, 0x105e), .driver_info = BTUSB_WRONG_SCO_MTU }, + + /* RTX Telecom based adapters with buggy SCO support */ + { USB_DEVICE(0x0400, 0x0807), .driver_info = BTUSB_BROKEN_ISOC }, + { USB_DEVICE(0x0400, 0x080a), .driver_info = BTUSB_BROKEN_ISOC }, + + /* CONWISE Technology based adapters with buggy SCO support */ + { USB_DEVICE(0x0e5e, 0x6622), + .driver_info = BTUSB_BROKEN_ISOC | BTUSB_CW6622}, + + /* Roper Class 1 Bluetooth Dongle (Silicon Wave based) */ + { USB_DEVICE(0x1310, 0x0001), .driver_info = BTUSB_SWAVE }, + + /* Digianswer devices */ + { USB_DEVICE(0x08fd, 0x0001), .driver_info = BTUSB_DIGIANSWER }, + { USB_DEVICE(0x08fd, 0x0002), .driver_info = BTUSB_IGNORE }, + + /* CSR BlueCore Bluetooth Sniffer */ + { USB_DEVICE(0x0a12, 0x0002), + .driver_info = BTUSB_SNIFFER | BTUSB_BROKEN_ISOC }, + + /* Frontline ComProbe Bluetooth Sniffer */ + { USB_DEVICE(0x16d3, 0x0002), + .driver_info = BTUSB_SNIFFER | BTUSB_BROKEN_ISOC }, + + /* Marvell Bluetooth devices */ + { USB_DEVICE(0x1286, 0x2044), .driver_info = BTUSB_MARVELL }, + { USB_DEVICE(0x1286, 0x2046), .driver_info = BTUSB_MARVELL }, + { USB_DEVICE(0x1286, 0x204e), .driver_info = BTUSB_MARVELL }, + + /* Intel Bluetooth devices */ + { USB_DEVICE(0x8087, 0x0025), .driver_info = BTUSB_INTEL_COMBINED }, + { USB_DEVICE(0x8087, 0x0026), .driver_info = BTUSB_INTEL_COMBINED }, + { USB_DEVICE(0x8087, 0x0029), .driver_info = BTUSB_INTEL_COMBINED }, + { USB_DEVICE(0x8087, 0x0032), .driver_info = BTUSB_INTEL_COMBINED }, + { USB_DEVICE(0x8087, 0x0033), .driver_info = BTUSB_INTEL_COMBINED }, + { USB_DEVICE(0x8087, 0x0035), .driver_info = BTUSB_INTEL_COMBINED }, + { USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR }, + { USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED | + BTUSB_INTEL_NO_WBS_SUPPORT | + BTUSB_INTEL_BROKEN_INITIAL_NCMD | + BTUSB_INTEL_BROKEN_SHUTDOWN_LED }, + { USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL_COMBINED | + BTUSB_INTEL_NO_WBS_SUPPORT | + BTUSB_INTEL_BROKEN_SHUTDOWN_LED }, + { USB_DEVICE(0x8087, 0x0a2b), .driver_info = BTUSB_INTEL_COMBINED }, + { USB_DEVICE(0x8087, 0x0aa7), .driver_info = BTUSB_INTEL_COMBINED | + BTUSB_INTEL_BROKEN_SHUTDOWN_LED }, + { USB_DEVICE(0x8087, 0x0aaa), .driver_info = BTUSB_INTEL_COMBINED }, + + /* Other Intel Bluetooth devices */ + { USB_VENDOR_AND_INTERFACE_INFO(0x8087, 0xe0, 0x01, 0x01), + .driver_info = BTUSB_IGNORE }, + + /* Realtek 8821CE Bluetooth devices */ + { USB_DEVICE(0x13d3, 0x3529), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + + /* Realtek 8822CE Bluetooth devices */ + { USB_DEVICE(0x0bda, 0xb00c), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0bda, 0xc822), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + + /* Realtek 8852AE Bluetooth devices */ + { USB_DEVICE(0x0bda, 0x2852), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0bda, 0xc852), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0bda, 0x385a), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0bda, 0x4852), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x04c5, 0x165c), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x04ca, 0x4006), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0cb8, 0xc549), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + + /* Realtek 8852CE Bluetooth devices */ + { USB_DEVICE(0x04ca, 0x4007), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x04c5, 0x1675), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0cb8, 0xc558), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x13d3, 0x3587), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x13d3, 0x3586), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x13d3, 0x3592), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + + /* Realtek 8852BE Bluetooth devices */ + { USB_DEVICE(0x0cb8, 0xc559), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0bda, 0x887b), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0bda, 0xb85b), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x13d3, 0x3570), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x13d3, 0x3571), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + + /* Realtek Bluetooth devices */ + { USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01), + .driver_info = BTUSB_REALTEK }, + + /* MediaTek Bluetooth devices */ + { USB_VENDOR_AND_INTERFACE_INFO(0x0e8d, 0xe0, 0x01, 0x01), + .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + + /* Additional MediaTek MT7615E Bluetooth devices */ + { USB_DEVICE(0x13d3, 0x3560), .driver_info = BTUSB_MEDIATEK}, + + /* Additional MediaTek MT7663 Bluetooth devices */ + { USB_DEVICE(0x043e, 0x310c), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x04ca, 0x3801), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + + /* Additional MediaTek MT7668 Bluetooth devices */ + { USB_DEVICE(0x043e, 0x3109), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + + /* Additional MediaTek MT7921 Bluetooth devices */ + { USB_DEVICE(0x0489, 0xe0c8), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x0489, 0xe0e0), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x0489, 0xe0f2), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x04ca, 0x3802), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x13d3, 0x3563), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x13d3, 0x3564), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x13d3, 0x3567), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x13d3, 0x3578), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x13d3, 0x3583), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x0489, 0xe0cd), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x0e8d, 0x0608), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + + /* MediaTek MT7922A Bluetooth devices */ + { USB_DEVICE(0x0489, 0xe0d8), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x0489, 0xe0d9), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x0489, 0xe0f5), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x13d3, 0x3568), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x0489, 0xe0e2), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + + /* Additional Realtek 8723AE Bluetooth devices */ + { USB_DEVICE(0x0930, 0x021d), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3394), .driver_info = BTUSB_REALTEK }, + + /* Additional Realtek 8723BE Bluetooth devices */ + { USB_DEVICE(0x0489, 0xe085), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x0489, 0xe08b), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x04f2, 0xb49f), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3410), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3416), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3459), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3494), .driver_info = BTUSB_REALTEK }, + + /* Additional Realtek 8723BU Bluetooth devices */ + { USB_DEVICE(0x7392, 0xa611), .driver_info = BTUSB_REALTEK }, + + /* Additional Realtek 8723DE Bluetooth devices */ + { USB_DEVICE(0x0bda, 0xb009), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x2ff8, 0xb011), .driver_info = BTUSB_REALTEK }, + + /* Additional Realtek 8761BUV Bluetooth devices */ + { USB_DEVICE(0x2357, 0x0604), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0b05, 0x190e), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x2550, 0x8761), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0bda, 0x8771), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x7392, 0xc611), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + + /* Additional Realtek 8821AE Bluetooth devices */ + { USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3414), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3458), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3461), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x13d3, 0x3462), .driver_info = BTUSB_REALTEK }, + + /* Additional Realtek 8822BE Bluetooth devices */ + { USB_DEVICE(0x13d3, 0x3526), .driver_info = BTUSB_REALTEK }, + { USB_DEVICE(0x0b05, 0x185c), .driver_info = BTUSB_REALTEK }, + + /* Additional Realtek 8822CE Bluetooth devices */ + { USB_DEVICE(0x04ca, 0x4005), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x04c5, 0x161f), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0b05, 0x18ef), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x13d3, 0x3548), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x13d3, 0x3549), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x13d3, 0x3553), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x13d3, 0x3555), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x2ff8, 0x3051), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x1358, 0xc123), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0bda, 0xc123), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0cb5, 0xc547), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + + /* Actions Semiconductor ATS2851 based devices */ + { USB_DEVICE(0x10d7, 0xb012), .driver_info = BTUSB_ACTIONS_SEMI }, + + /* Silicon Wave based devices */ + { USB_DEVICE(0x0c10, 0x0000), .driver_info = BTUSB_SWAVE }, + + { } /* Terminating entry */ +}; + +/* The Bluetooth USB module build into some devices needs to be reset on resume, + * this is a problem with the platform (likely shutting off all power) not with + * the module itself. So we use a DMI list to match known broken platforms. + */ +static const struct dmi_system_id btusb_needs_reset_resume_table[] = { + { + /* Dell OptiPlex 3060 (QCA ROME device 0cf3:e007) */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 3060"), + }, + }, + { + /* Dell XPS 9360 (QCA ROME device 0cf3:e300) */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "XPS 13 9360"), + }, + }, + { + /* Dell Inspiron 5565 (QCA ROME device 0cf3:e009) */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 5565"), + }, + }, + {} +}; + +#define BTUSB_MAX_ISOC_FRAMES 10 + +#define BTUSB_INTR_RUNNING 0 +#define BTUSB_BULK_RUNNING 1 +#define BTUSB_ISOC_RUNNING 2 +#define BTUSB_SUSPENDING 3 +#define BTUSB_DID_ISO_RESUME 4 +#define BTUSB_BOOTLOADER 5 +#define BTUSB_DOWNLOADING 6 +#define BTUSB_FIRMWARE_LOADED 7 +#define BTUSB_FIRMWARE_FAILED 8 +#define BTUSB_BOOTING 9 +#define BTUSB_DIAG_RUNNING 10 +#define BTUSB_OOB_WAKE_ENABLED 11 +#define BTUSB_HW_RESET_ACTIVE 12 +#define BTUSB_TX_WAIT_VND_EVT 13 +#define BTUSB_WAKEUP_AUTOSUSPEND 14 +#define BTUSB_USE_ALT3_FOR_WBS 15 + +struct btusb_data { + struct hci_dev *hdev; + struct usb_device *udev; + struct usb_interface *intf; + struct usb_interface *isoc; + struct usb_interface *diag; + unsigned isoc_ifnum; + + unsigned long flags; + + bool poll_sync; + int intr_interval; + struct work_struct work; + struct work_struct waker; + struct delayed_work rx_work; + + struct sk_buff_head acl_q; + + struct usb_anchor deferred; + struct usb_anchor tx_anchor; + int tx_in_flight; + spinlock_t txlock; + + struct usb_anchor intr_anchor; + struct usb_anchor bulk_anchor; + struct usb_anchor isoc_anchor; + struct usb_anchor diag_anchor; + struct usb_anchor ctrl_anchor; + spinlock_t rxlock; + + struct sk_buff *evt_skb; + struct sk_buff *acl_skb; + struct sk_buff *sco_skb; + + struct usb_endpoint_descriptor *intr_ep; + struct usb_endpoint_descriptor *bulk_tx_ep; + struct usb_endpoint_descriptor *bulk_rx_ep; + struct usb_endpoint_descriptor *isoc_tx_ep; + struct usb_endpoint_descriptor *isoc_rx_ep; + struct usb_endpoint_descriptor *diag_tx_ep; + struct usb_endpoint_descriptor *diag_rx_ep; + + struct gpio_desc *reset_gpio; + + __u8 cmdreq_type; + __u8 cmdreq; + + unsigned int sco_num; + unsigned int air_mode; + bool usb_alt6_packet_flow; + int isoc_altsetting; + int suspend_count; + + int (*recv_event)(struct hci_dev *hdev, struct sk_buff *skb); + int (*recv_acl)(struct hci_dev *hdev, struct sk_buff *skb); + int (*recv_bulk)(struct btusb_data *data, void *buffer, int count); + + int (*setup_on_usb)(struct hci_dev *hdev); + + int oob_wake_irq; /* irq for out-of-band wake-on-bt */ + unsigned cmd_timeout_cnt; +}; + +static void btusb_intel_cmd_timeout(struct hci_dev *hdev) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + struct gpio_desc *reset_gpio = data->reset_gpio; + + if (++data->cmd_timeout_cnt < 5) + return; + + if (!reset_gpio) { + bt_dev_err(hdev, "No way to reset. Ignoring and continuing"); + return; + } + + /* + * Toggle the hard reset line if the platform provides one. The reset + * is going to yank the device off the USB and then replug. So doing + * once is enough. The cleanup is handled correctly on the way out + * (standard USB disconnect), and the new device is detected cleanly + * and bound to the driver again like it should be. + */ + if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) { + bt_dev_err(hdev, "last reset failed? Not resetting again"); + return; + } + + bt_dev_err(hdev, "Initiating HW reset via gpio"); + gpiod_set_value_cansleep(reset_gpio, 1); + msleep(100); + gpiod_set_value_cansleep(reset_gpio, 0); +} + +static void btusb_rtl_cmd_timeout(struct hci_dev *hdev) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + struct gpio_desc *reset_gpio = data->reset_gpio; + + if (++data->cmd_timeout_cnt < 5) + return; + + if (!reset_gpio) { + bt_dev_err(hdev, "No gpio to reset Realtek device, ignoring"); + return; + } + + /* Toggle the hard reset line. The Realtek device is going to + * yank itself off the USB and then replug. The cleanup is handled + * correctly on the way out (standard USB disconnect), and the new + * device is detected cleanly and bound to the driver again like + * it should be. + */ + if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) { + bt_dev_err(hdev, "last reset failed? Not resetting again"); + return; + } + + bt_dev_err(hdev, "Reset Realtek device via gpio"); + gpiod_set_value_cansleep(reset_gpio, 1); + msleep(200); + gpiod_set_value_cansleep(reset_gpio, 0); +} + +static void btusb_qca_cmd_timeout(struct hci_dev *hdev) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + struct gpio_desc *reset_gpio = data->reset_gpio; + int err; + + if (++data->cmd_timeout_cnt < 5) + return; + + if (reset_gpio) { + bt_dev_err(hdev, "Reset qca device via bt_en gpio"); + + /* Toggle the hard reset line. The qca bt device is going to + * yank itself off the USB and then replug. The cleanup is handled + * correctly on the way out (standard USB disconnect), and the new + * device is detected cleanly and bound to the driver again like + * it should be. + */ + if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) { + bt_dev_err(hdev, "last reset failed? Not resetting again"); + return; + } + + gpiod_set_value_cansleep(reset_gpio, 0); + msleep(200); + gpiod_set_value_cansleep(reset_gpio, 1); + + return; + } + + bt_dev_err(hdev, "Multiple cmd timeouts seen. Resetting usb device."); + /* This is not an unbalanced PM reference since the device will reset */ + err = usb_autopm_get_interface(data->intf); + if (!err) + usb_queue_reset_device(data->intf); + else + bt_dev_err(hdev, "Failed usb_autopm_get_interface with %d", err); +} + +static inline void btusb_free_frags(struct btusb_data *data) +{ + unsigned long flags; + + spin_lock_irqsave(&data->rxlock, flags); + + dev_kfree_skb_irq(data->evt_skb); + data->evt_skb = NULL; + + dev_kfree_skb_irq(data->acl_skb); + data->acl_skb = NULL; + + dev_kfree_skb_irq(data->sco_skb); + data->sco_skb = NULL; + + spin_unlock_irqrestore(&data->rxlock, flags); +} + +static int btusb_recv_event(struct btusb_data *data, struct sk_buff *skb) +{ + if (data->intr_interval) { + /* Trigger dequeue immediatelly if an event is received */ + schedule_delayed_work(&data->rx_work, 0); + } + + return data->recv_event(data->hdev, skb); +} + +static int btusb_recv_intr(struct btusb_data *data, void *buffer, int count) +{ + struct sk_buff *skb; + unsigned long flags; + int err = 0; + + spin_lock_irqsave(&data->rxlock, flags); + skb = data->evt_skb; + + while (count) { + int len; + + if (!skb) { + skb = bt_skb_alloc(HCI_MAX_EVENT_SIZE, GFP_ATOMIC); + if (!skb) { + err = -ENOMEM; + break; + } + + hci_skb_pkt_type(skb) = HCI_EVENT_PKT; + hci_skb_expect(skb) = HCI_EVENT_HDR_SIZE; + } + + len = min_t(uint, hci_skb_expect(skb), count); + skb_put_data(skb, buffer, len); + + count -= len; + buffer += len; + hci_skb_expect(skb) -= len; + + if (skb->len == HCI_EVENT_HDR_SIZE) { + /* Complete event header */ + hci_skb_expect(skb) = hci_event_hdr(skb)->plen; + + if (skb_tailroom(skb) < hci_skb_expect(skb)) { + kfree_skb(skb); + skb = NULL; + + err = -EILSEQ; + break; + } + } + + if (!hci_skb_expect(skb)) { + /* Complete frame */ + btusb_recv_event(data, skb); + skb = NULL; + } + } + + data->evt_skb = skb; + spin_unlock_irqrestore(&data->rxlock, flags); + + return err; +} + +static int btusb_recv_acl(struct btusb_data *data, struct sk_buff *skb) +{ + /* Only queue ACL packet if intr_interval is set as it means + * force_poll_sync has been enabled. + */ + if (!data->intr_interval) + return data->recv_acl(data->hdev, skb); + + skb_queue_tail(&data->acl_q, skb); + schedule_delayed_work(&data->rx_work, data->intr_interval); + + return 0; +} + +static int btusb_recv_bulk(struct btusb_data *data, void *buffer, int count) +{ + struct sk_buff *skb; + unsigned long flags; + int err = 0; + + spin_lock_irqsave(&data->rxlock, flags); + skb = data->acl_skb; + + while (count) { + int len; + + if (!skb) { + skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC); + if (!skb) { + err = -ENOMEM; + break; + } + + hci_skb_pkt_type(skb) = HCI_ACLDATA_PKT; + hci_skb_expect(skb) = HCI_ACL_HDR_SIZE; + } + + len = min_t(uint, hci_skb_expect(skb), count); + skb_put_data(skb, buffer, len); + + count -= len; + buffer += len; + hci_skb_expect(skb) -= len; + + if (skb->len == HCI_ACL_HDR_SIZE) { + __le16 dlen = hci_acl_hdr(skb)->dlen; + + /* Complete ACL header */ + hci_skb_expect(skb) = __le16_to_cpu(dlen); + + if (skb_tailroom(skb) < hci_skb_expect(skb)) { + kfree_skb(skb); + skb = NULL; + + err = -EILSEQ; + break; + } + } + + if (!hci_skb_expect(skb)) { + /* Complete frame */ + btusb_recv_acl(data, skb); + skb = NULL; + } + } + + data->acl_skb = skb; + spin_unlock_irqrestore(&data->rxlock, flags); + + return err; +} + +static int btusb_recv_isoc(struct btusb_data *data, void *buffer, int count) +{ + struct sk_buff *skb; + unsigned long flags; + int err = 0; + + spin_lock_irqsave(&data->rxlock, flags); + skb = data->sco_skb; + + while (count) { + int len; + + if (!skb) { + skb = bt_skb_alloc(HCI_MAX_SCO_SIZE, GFP_ATOMIC); + if (!skb) { + err = -ENOMEM; + break; + } + + hci_skb_pkt_type(skb) = HCI_SCODATA_PKT; + hci_skb_expect(skb) = HCI_SCO_HDR_SIZE; + } + + len = min_t(uint, hci_skb_expect(skb), count); + skb_put_data(skb, buffer, len); + + count -= len; + buffer += len; + hci_skb_expect(skb) -= len; + + if (skb->len == HCI_SCO_HDR_SIZE) { + /* Complete SCO header */ + hci_skb_expect(skb) = hci_sco_hdr(skb)->dlen; + + if (skb_tailroom(skb) < hci_skb_expect(skb)) { + kfree_skb(skb); + skb = NULL; + + err = -EILSEQ; + break; + } + } + + if (!hci_skb_expect(skb)) { + /* Complete frame */ + hci_recv_frame(data->hdev, skb); + skb = NULL; + } + } + + data->sco_skb = skb; + spin_unlock_irqrestore(&data->rxlock, flags); + + return err; +} + +static void btusb_intr_complete(struct urb *urb) +{ + struct hci_dev *hdev = urb->context; + struct btusb_data *data = hci_get_drvdata(hdev); + int err; + + BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status, + urb->actual_length); + + if (!test_bit(HCI_RUNNING, &hdev->flags)) + return; + + if (urb->status == 0) { + hdev->stat.byte_rx += urb->actual_length; + + if (btusb_recv_intr(data, urb->transfer_buffer, + urb->actual_length) < 0) { + bt_dev_err(hdev, "corrupted event packet"); + hdev->stat.err_rx++; + } + } else if (urb->status == -ENOENT) { + /* Avoid suspend failed when usb_kill_urb */ + return; + } + + if (!test_bit(BTUSB_INTR_RUNNING, &data->flags)) + return; + + usb_mark_last_busy(data->udev); + usb_anchor_urb(urb, &data->intr_anchor); + + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err < 0) { + /* -EPERM: urb is being killed; + * -ENODEV: device got disconnected + */ + if (err != -EPERM && err != -ENODEV) + bt_dev_err(hdev, "urb %p failed to resubmit (%d)", + urb, -err); + if (err != -EPERM) + hci_cmd_sync_cancel(hdev, -err); + usb_unanchor_urb(urb); + } +} + +static int btusb_submit_intr_urb(struct hci_dev *hdev, gfp_t mem_flags) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + struct urb *urb; + unsigned char *buf; + unsigned int pipe; + int err, size; + + BT_DBG("%s", hdev->name); + + if (!data->intr_ep) + return -ENODEV; + + urb = usb_alloc_urb(0, mem_flags); + if (!urb) + return -ENOMEM; + + size = le16_to_cpu(data->intr_ep->wMaxPacketSize); + + buf = kmalloc(size, mem_flags); + if (!buf) { + usb_free_urb(urb); + return -ENOMEM; + } + + pipe = usb_rcvintpipe(data->udev, data->intr_ep->bEndpointAddress); + + usb_fill_int_urb(urb, data->udev, pipe, buf, size, + btusb_intr_complete, hdev, data->intr_ep->bInterval); + + urb->transfer_flags |= URB_FREE_BUFFER; + + usb_anchor_urb(urb, &data->intr_anchor); + + err = usb_submit_urb(urb, mem_flags); + if (err < 0) { + if (err != -EPERM && err != -ENODEV) + bt_dev_err(hdev, "urb %p submission failed (%d)", + urb, -err); + if (err != -EPERM) + hci_cmd_sync_cancel(hdev, -err); + usb_unanchor_urb(urb); + } + + /* Only initialize intr_interval if URB poll sync is enabled */ + if (!data->poll_sync) + goto done; + + /* The units are frames (milliseconds) for full and low speed devices, + * and microframes (1/8 millisecond) for highspeed and SuperSpeed + * devices. + * + * This is done once on open/resume so it shouldn't change even if + * force_poll_sync changes. + */ + switch (urb->dev->speed) { + case USB_SPEED_SUPER_PLUS: + case USB_SPEED_SUPER: /* units are 125us */ + data->intr_interval = usecs_to_jiffies(urb->interval * 125); + break; + default: + data->intr_interval = msecs_to_jiffies(urb->interval); + break; + } + +done: + usb_free_urb(urb); + + return err; +} + +static void btusb_bulk_complete(struct urb *urb) +{ + struct hci_dev *hdev = urb->context; + struct btusb_data *data = hci_get_drvdata(hdev); + int err; + + BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status, + urb->actual_length); + + if (!test_bit(HCI_RUNNING, &hdev->flags)) + return; + + if (urb->status == 0) { + hdev->stat.byte_rx += urb->actual_length; + + if (data->recv_bulk(data, urb->transfer_buffer, + urb->actual_length) < 0) { + bt_dev_err(hdev, "corrupted ACL packet"); + hdev->stat.err_rx++; + } + } else if (urb->status == -ENOENT) { + /* Avoid suspend failed when usb_kill_urb */ + return; + } + + if (!test_bit(BTUSB_BULK_RUNNING, &data->flags)) + return; + + usb_anchor_urb(urb, &data->bulk_anchor); + usb_mark_last_busy(data->udev); + + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err < 0) { + /* -EPERM: urb is being killed; + * -ENODEV: device got disconnected + */ + if (err != -EPERM && err != -ENODEV) + bt_dev_err(hdev, "urb %p failed to resubmit (%d)", + urb, -err); + usb_unanchor_urb(urb); + } +} + +static int btusb_submit_bulk_urb(struct hci_dev *hdev, gfp_t mem_flags) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + struct urb *urb; + unsigned char *buf; + unsigned int pipe; + int err, size = HCI_MAX_FRAME_SIZE; + + BT_DBG("%s", hdev->name); + + if (!data->bulk_rx_ep) + return -ENODEV; + + urb = usb_alloc_urb(0, mem_flags); + if (!urb) + return -ENOMEM; + + buf = kmalloc(size, mem_flags); + if (!buf) { + usb_free_urb(urb); + return -ENOMEM; + } + + pipe = usb_rcvbulkpipe(data->udev, data->bulk_rx_ep->bEndpointAddress); + + usb_fill_bulk_urb(urb, data->udev, pipe, buf, size, + btusb_bulk_complete, hdev); + + urb->transfer_flags |= URB_FREE_BUFFER; + + usb_mark_last_busy(data->udev); + usb_anchor_urb(urb, &data->bulk_anchor); + + err = usb_submit_urb(urb, mem_flags); + if (err < 0) { + if (err != -EPERM && err != -ENODEV) + bt_dev_err(hdev, "urb %p submission failed (%d)", + urb, -err); + usb_unanchor_urb(urb); + } + + usb_free_urb(urb); + + return err; +} + +static void btusb_isoc_complete(struct urb *urb) +{ + struct hci_dev *hdev = urb->context; + struct btusb_data *data = hci_get_drvdata(hdev); + int i, err; + + BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status, + urb->actual_length); + + if (!test_bit(HCI_RUNNING, &hdev->flags)) + return; + + if (urb->status == 0) { + for (i = 0; i < urb->number_of_packets; i++) { + unsigned int offset = urb->iso_frame_desc[i].offset; + unsigned int length = urb->iso_frame_desc[i].actual_length; + + if (urb->iso_frame_desc[i].status) + continue; + + hdev->stat.byte_rx += length; + + if (btusb_recv_isoc(data, urb->transfer_buffer + offset, + length) < 0) { + bt_dev_err(hdev, "corrupted SCO packet"); + hdev->stat.err_rx++; + } + } + } else if (urb->status == -ENOENT) { + /* Avoid suspend failed when usb_kill_urb */ + return; + } + + if (!test_bit(BTUSB_ISOC_RUNNING, &data->flags)) + return; + + usb_anchor_urb(urb, &data->isoc_anchor); + + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err < 0) { + /* -EPERM: urb is being killed; + * -ENODEV: device got disconnected + */ + if (err != -EPERM && err != -ENODEV) + bt_dev_err(hdev, "urb %p failed to resubmit (%d)", + urb, -err); + usb_unanchor_urb(urb); + } +} + +static inline void __fill_isoc_descriptor_msbc(struct urb *urb, int len, + int mtu, struct btusb_data *data) +{ + int i, offset = 0; + unsigned int interval; + + BT_DBG("len %d mtu %d", len, mtu); + + /* For mSBC ALT 6 setting the host will send the packet at continuous + * flow. As per core spec 5, vol 4, part B, table 2.1. For ALT setting + * 6 the HCI PACKET INTERVAL should be 7.5ms for every usb packets. + * To maintain the rate we send 63bytes of usb packets alternatively for + * 7ms and 8ms to maintain the rate as 7.5ms. + */ + if (data->usb_alt6_packet_flow) { + interval = 7; + data->usb_alt6_packet_flow = false; + } else { + interval = 6; + data->usb_alt6_packet_flow = true; + } + + for (i = 0; i < interval; i++) { + urb->iso_frame_desc[i].offset = offset; + urb->iso_frame_desc[i].length = offset; + } + + if (len && i < BTUSB_MAX_ISOC_FRAMES) { + urb->iso_frame_desc[i].offset = offset; + urb->iso_frame_desc[i].length = len; + i++; + } + + urb->number_of_packets = i; +} + +static inline void __fill_isoc_descriptor(struct urb *urb, int len, int mtu) +{ + int i, offset = 0; + + BT_DBG("len %d mtu %d", len, mtu); + + for (i = 0; i < BTUSB_MAX_ISOC_FRAMES && len >= mtu; + i++, offset += mtu, len -= mtu) { + urb->iso_frame_desc[i].offset = offset; + urb->iso_frame_desc[i].length = mtu; + } + + if (len && i < BTUSB_MAX_ISOC_FRAMES) { + urb->iso_frame_desc[i].offset = offset; + urb->iso_frame_desc[i].length = len; + i++; + } + + urb->number_of_packets = i; +} + +static int btusb_submit_isoc_urb(struct hci_dev *hdev, gfp_t mem_flags) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + struct urb *urb; + unsigned char *buf; + unsigned int pipe; + int err, size; + + BT_DBG("%s", hdev->name); + + if (!data->isoc_rx_ep) + return -ENODEV; + + urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, mem_flags); + if (!urb) + return -ENOMEM; + + size = le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize) * + BTUSB_MAX_ISOC_FRAMES; + + buf = kmalloc(size, mem_flags); + if (!buf) { + usb_free_urb(urb); + return -ENOMEM; + } + + pipe = usb_rcvisocpipe(data->udev, data->isoc_rx_ep->bEndpointAddress); + + usb_fill_int_urb(urb, data->udev, pipe, buf, size, btusb_isoc_complete, + hdev, data->isoc_rx_ep->bInterval); + + urb->transfer_flags = URB_FREE_BUFFER | URB_ISO_ASAP; + + __fill_isoc_descriptor(urb, size, + le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize)); + + usb_anchor_urb(urb, &data->isoc_anchor); + + err = usb_submit_urb(urb, mem_flags); + if (err < 0) { + if (err != -EPERM && err != -ENODEV) + bt_dev_err(hdev, "urb %p submission failed (%d)", + urb, -err); + usb_unanchor_urb(urb); + } + + usb_free_urb(urb); + + return err; +} + +static void btusb_diag_complete(struct urb *urb) +{ + struct hci_dev *hdev = urb->context; + struct btusb_data *data = hci_get_drvdata(hdev); + int err; + + BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status, + urb->actual_length); + + if (urb->status == 0) { + struct sk_buff *skb; + + skb = bt_skb_alloc(urb->actual_length, GFP_ATOMIC); + if (skb) { + skb_put_data(skb, urb->transfer_buffer, + urb->actual_length); + hci_recv_diag(hdev, skb); + } + } else if (urb->status == -ENOENT) { + /* Avoid suspend failed when usb_kill_urb */ + return; + } + + if (!test_bit(BTUSB_DIAG_RUNNING, &data->flags)) + return; + + usb_anchor_urb(urb, &data->diag_anchor); + usb_mark_last_busy(data->udev); + + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err < 0) { + /* -EPERM: urb is being killed; + * -ENODEV: device got disconnected + */ + if (err != -EPERM && err != -ENODEV) + bt_dev_err(hdev, "urb %p failed to resubmit (%d)", + urb, -err); + usb_unanchor_urb(urb); + } +} + +static int btusb_submit_diag_urb(struct hci_dev *hdev, gfp_t mem_flags) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + struct urb *urb; + unsigned char *buf; + unsigned int pipe; + int err, size = HCI_MAX_FRAME_SIZE; + + BT_DBG("%s", hdev->name); + + if (!data->diag_rx_ep) + return -ENODEV; + + urb = usb_alloc_urb(0, mem_flags); + if (!urb) + return -ENOMEM; + + buf = kmalloc(size, mem_flags); + if (!buf) { + usb_free_urb(urb); + return -ENOMEM; + } + + pipe = usb_rcvbulkpipe(data->udev, data->diag_rx_ep->bEndpointAddress); + + usb_fill_bulk_urb(urb, data->udev, pipe, buf, size, + btusb_diag_complete, hdev); + + urb->transfer_flags |= URB_FREE_BUFFER; + + usb_mark_last_busy(data->udev); + usb_anchor_urb(urb, &data->diag_anchor); + + err = usb_submit_urb(urb, mem_flags); + if (err < 0) { + if (err != -EPERM && err != -ENODEV) + bt_dev_err(hdev, "urb %p submission failed (%d)", + urb, -err); + usb_unanchor_urb(urb); + } + + usb_free_urb(urb); + + return err; +} + +static void btusb_tx_complete(struct urb *urb) +{ + struct sk_buff *skb = urb->context; + struct hci_dev *hdev = (struct hci_dev *)skb->dev; + struct btusb_data *data = hci_get_drvdata(hdev); + unsigned long flags; + + BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status, + urb->actual_length); + + if (!test_bit(HCI_RUNNING, &hdev->flags)) + goto done; + + if (!urb->status) { + hdev->stat.byte_tx += urb->transfer_buffer_length; + } else { + if (hci_skb_pkt_type(skb) == HCI_COMMAND_PKT) + hci_cmd_sync_cancel(hdev, -urb->status); + hdev->stat.err_tx++; + } + +done: + spin_lock_irqsave(&data->txlock, flags); + data->tx_in_flight--; + spin_unlock_irqrestore(&data->txlock, flags); + + kfree(urb->setup_packet); + + kfree_skb(skb); +} + +static void btusb_isoc_tx_complete(struct urb *urb) +{ + struct sk_buff *skb = urb->context; + struct hci_dev *hdev = (struct hci_dev *)skb->dev; + + BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status, + urb->actual_length); + + if (!test_bit(HCI_RUNNING, &hdev->flags)) + goto done; + + if (!urb->status) + hdev->stat.byte_tx += urb->transfer_buffer_length; + else + hdev->stat.err_tx++; + +done: + kfree(urb->setup_packet); + + kfree_skb(skb); +} + +static int btusb_open(struct hci_dev *hdev) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + int err; + + BT_DBG("%s", hdev->name); + + err = usb_autopm_get_interface(data->intf); + if (err < 0) + return err; + + /* Patching USB firmware files prior to starting any URBs of HCI path + * It is more safe to use USB bulk channel for downloading USB patch + */ + if (data->setup_on_usb) { + err = data->setup_on_usb(hdev); + if (err < 0) + goto setup_fail; + } + + data->intf->needs_remote_wakeup = 1; + + if (test_and_set_bit(BTUSB_INTR_RUNNING, &data->flags)) + goto done; + + err = btusb_submit_intr_urb(hdev, GFP_KERNEL); + if (err < 0) + goto failed; + + err = btusb_submit_bulk_urb(hdev, GFP_KERNEL); + if (err < 0) { + usb_kill_anchored_urbs(&data->intr_anchor); + goto failed; + } + + set_bit(BTUSB_BULK_RUNNING, &data->flags); + btusb_submit_bulk_urb(hdev, GFP_KERNEL); + + if (data->diag) { + if (!btusb_submit_diag_urb(hdev, GFP_KERNEL)) + set_bit(BTUSB_DIAG_RUNNING, &data->flags); + } + +done: + usb_autopm_put_interface(data->intf); + return 0; + +failed: + clear_bit(BTUSB_INTR_RUNNING, &data->flags); +setup_fail: + usb_autopm_put_interface(data->intf); + return err; +} + +static void btusb_stop_traffic(struct btusb_data *data) +{ + usb_kill_anchored_urbs(&data->intr_anchor); + usb_kill_anchored_urbs(&data->bulk_anchor); + usb_kill_anchored_urbs(&data->isoc_anchor); + usb_kill_anchored_urbs(&data->diag_anchor); + usb_kill_anchored_urbs(&data->ctrl_anchor); +} + +static int btusb_close(struct hci_dev *hdev) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + int err; + + BT_DBG("%s", hdev->name); + + cancel_delayed_work(&data->rx_work); + cancel_work_sync(&data->work); + cancel_work_sync(&data->waker); + + skb_queue_purge(&data->acl_q); + + clear_bit(BTUSB_ISOC_RUNNING, &data->flags); + clear_bit(BTUSB_BULK_RUNNING, &data->flags); + clear_bit(BTUSB_INTR_RUNNING, &data->flags); + clear_bit(BTUSB_DIAG_RUNNING, &data->flags); + + btusb_stop_traffic(data); + btusb_free_frags(data); + + err = usb_autopm_get_interface(data->intf); + if (err < 0) + goto failed; + + data->intf->needs_remote_wakeup = 0; + + /* Enable remote wake up for auto-suspend */ + if (test_bit(BTUSB_WAKEUP_AUTOSUSPEND, &data->flags)) + data->intf->needs_remote_wakeup = 1; + + usb_autopm_put_interface(data->intf); + +failed: + usb_scuttle_anchored_urbs(&data->deferred); + return 0; +} + +static int btusb_flush(struct hci_dev *hdev) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + + BT_DBG("%s", hdev->name); + + cancel_delayed_work(&data->rx_work); + + skb_queue_purge(&data->acl_q); + + usb_kill_anchored_urbs(&data->tx_anchor); + btusb_free_frags(data); + + return 0; +} + +static struct urb *alloc_ctrl_urb(struct hci_dev *hdev, struct sk_buff *skb) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + struct usb_ctrlrequest *dr; + struct urb *urb; + unsigned int pipe; + + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) + return ERR_PTR(-ENOMEM); + + dr = kmalloc(sizeof(*dr), GFP_KERNEL); + if (!dr) { + usb_free_urb(urb); + return ERR_PTR(-ENOMEM); + } + + dr->bRequestType = data->cmdreq_type; + dr->bRequest = data->cmdreq; + dr->wIndex = 0; + dr->wValue = 0; + dr->wLength = __cpu_to_le16(skb->len); + + pipe = usb_sndctrlpipe(data->udev, 0x00); + + usb_fill_control_urb(urb, data->udev, pipe, (void *)dr, + skb->data, skb->len, btusb_tx_complete, skb); + + skb->dev = (void *)hdev; + + return urb; +} + +static struct urb *alloc_bulk_urb(struct hci_dev *hdev, struct sk_buff *skb) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + struct urb *urb; + unsigned int pipe; + + if (!data->bulk_tx_ep) + return ERR_PTR(-ENODEV); + + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) + return ERR_PTR(-ENOMEM); + + pipe = usb_sndbulkpipe(data->udev, data->bulk_tx_ep->bEndpointAddress); + + usb_fill_bulk_urb(urb, data->udev, pipe, + skb->data, skb->len, btusb_tx_complete, skb); + + skb->dev = (void *)hdev; + + return urb; +} + +static struct urb *alloc_isoc_urb(struct hci_dev *hdev, struct sk_buff *skb) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + struct urb *urb; + unsigned int pipe; + + if (!data->isoc_tx_ep) + return ERR_PTR(-ENODEV); + + urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, GFP_KERNEL); + if (!urb) + return ERR_PTR(-ENOMEM); + + pipe = usb_sndisocpipe(data->udev, data->isoc_tx_ep->bEndpointAddress); + + usb_fill_int_urb(urb, data->udev, pipe, + skb->data, skb->len, btusb_isoc_tx_complete, + skb, data->isoc_tx_ep->bInterval); + + urb->transfer_flags = URB_ISO_ASAP; + + if (data->isoc_altsetting == 6) + __fill_isoc_descriptor_msbc(urb, skb->len, + le16_to_cpu(data->isoc_tx_ep->wMaxPacketSize), + data); + else + __fill_isoc_descriptor(urb, skb->len, + le16_to_cpu(data->isoc_tx_ep->wMaxPacketSize)); + skb->dev = (void *)hdev; + + return urb; +} + +static int submit_tx_urb(struct hci_dev *hdev, struct urb *urb) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + int err; + + usb_anchor_urb(urb, &data->tx_anchor); + + err = usb_submit_urb(urb, GFP_KERNEL); + if (err < 0) { + if (err != -EPERM && err != -ENODEV) + bt_dev_err(hdev, "urb %p submission failed (%d)", + urb, -err); + kfree(urb->setup_packet); + usb_unanchor_urb(urb); + } else { + usb_mark_last_busy(data->udev); + } + + usb_free_urb(urb); + return err; +} + +static int submit_or_queue_tx_urb(struct hci_dev *hdev, struct urb *urb) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + unsigned long flags; + bool suspending; + + spin_lock_irqsave(&data->txlock, flags); + suspending = test_bit(BTUSB_SUSPENDING, &data->flags); + if (!suspending) + data->tx_in_flight++; + spin_unlock_irqrestore(&data->txlock, flags); + + if (!suspending) + return submit_tx_urb(hdev, urb); + + usb_anchor_urb(urb, &data->deferred); + schedule_work(&data->waker); + + usb_free_urb(urb); + return 0; +} + +static int btusb_send_frame(struct hci_dev *hdev, struct sk_buff *skb) +{ + struct urb *urb; + + BT_DBG("%s", hdev->name); + + switch (hci_skb_pkt_type(skb)) { + case HCI_COMMAND_PKT: + urb = alloc_ctrl_urb(hdev, skb); + if (IS_ERR(urb)) + return PTR_ERR(urb); + + hdev->stat.cmd_tx++; + return submit_or_queue_tx_urb(hdev, urb); + + case HCI_ACLDATA_PKT: + urb = alloc_bulk_urb(hdev, skb); + if (IS_ERR(urb)) + return PTR_ERR(urb); + + hdev->stat.acl_tx++; + return submit_or_queue_tx_urb(hdev, urb); + + case HCI_SCODATA_PKT: + if (hci_conn_num(hdev, SCO_LINK) < 1) + return -ENODEV; + + urb = alloc_isoc_urb(hdev, skb); + if (IS_ERR(urb)) + return PTR_ERR(urb); + + hdev->stat.sco_tx++; + return submit_tx_urb(hdev, urb); + + case HCI_ISODATA_PKT: + urb = alloc_bulk_urb(hdev, skb); + if (IS_ERR(urb)) + return PTR_ERR(urb); + + return submit_or_queue_tx_urb(hdev, urb); + } + + return -EILSEQ; +} + +static void btusb_notify(struct hci_dev *hdev, unsigned int evt) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + + BT_DBG("%s evt %d", hdev->name, evt); + + if (hci_conn_num(hdev, SCO_LINK) != data->sco_num) { + data->sco_num = hci_conn_num(hdev, SCO_LINK); + data->air_mode = evt; + schedule_work(&data->work); + } +} + +static inline int __set_isoc_interface(struct hci_dev *hdev, int altsetting) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + struct usb_interface *intf = data->isoc; + struct usb_endpoint_descriptor *ep_desc; + int i, err; + + if (!data->isoc) + return -ENODEV; + + err = usb_set_interface(data->udev, data->isoc_ifnum, altsetting); + if (err < 0) { + bt_dev_err(hdev, "setting interface failed (%d)", -err); + return err; + } + + data->isoc_altsetting = altsetting; + + data->isoc_tx_ep = NULL; + data->isoc_rx_ep = NULL; + + for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) { + ep_desc = &intf->cur_altsetting->endpoint[i].desc; + + if (!data->isoc_tx_ep && usb_endpoint_is_isoc_out(ep_desc)) { + data->isoc_tx_ep = ep_desc; + continue; + } + + if (!data->isoc_rx_ep && usb_endpoint_is_isoc_in(ep_desc)) { + data->isoc_rx_ep = ep_desc; + continue; + } + } + + if (!data->isoc_tx_ep || !data->isoc_rx_ep) { + bt_dev_err(hdev, "invalid SCO descriptors"); + return -ENODEV; + } + + return 0; +} + +static int btusb_switch_alt_setting(struct hci_dev *hdev, int new_alts) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + int err; + + if (data->isoc_altsetting != new_alts) { + unsigned long flags; + + clear_bit(BTUSB_ISOC_RUNNING, &data->flags); + usb_kill_anchored_urbs(&data->isoc_anchor); + + /* When isochronous alternate setting needs to be + * changed, because SCO connection has been added + * or removed, a packet fragment may be left in the + * reassembling state. This could lead to wrongly + * assembled fragments. + * + * Clear outstanding fragment when selecting a new + * alternate setting. + */ + spin_lock_irqsave(&data->rxlock, flags); + dev_kfree_skb_irq(data->sco_skb); + data->sco_skb = NULL; + spin_unlock_irqrestore(&data->rxlock, flags); + + err = __set_isoc_interface(hdev, new_alts); + if (err < 0) + return err; + } + + if (!test_and_set_bit(BTUSB_ISOC_RUNNING, &data->flags)) { + if (btusb_submit_isoc_urb(hdev, GFP_KERNEL) < 0) + clear_bit(BTUSB_ISOC_RUNNING, &data->flags); + else + btusb_submit_isoc_urb(hdev, GFP_KERNEL); + } + + return 0; +} + +static struct usb_host_interface *btusb_find_altsetting(struct btusb_data *data, + int alt) +{ + struct usb_interface *intf = data->isoc; + int i; + + BT_DBG("Looking for Alt no :%d", alt); + + if (!intf) + return NULL; + + for (i = 0; i < intf->num_altsetting; i++) { + if (intf->altsetting[i].desc.bAlternateSetting == alt) + return &intf->altsetting[i]; + } + + return NULL; +} + +static void btusb_work(struct work_struct *work) +{ + struct btusb_data *data = container_of(work, struct btusb_data, work); + struct hci_dev *hdev = data->hdev; + int new_alts = 0; + int err; + + if (data->sco_num > 0) { + if (!test_bit(BTUSB_DID_ISO_RESUME, &data->flags)) { + err = usb_autopm_get_interface(data->isoc ? data->isoc : data->intf); + if (err < 0) { + clear_bit(BTUSB_ISOC_RUNNING, &data->flags); + usb_kill_anchored_urbs(&data->isoc_anchor); + return; + } + + set_bit(BTUSB_DID_ISO_RESUME, &data->flags); + } + + if (data->air_mode == HCI_NOTIFY_ENABLE_SCO_CVSD) { + if (hdev->voice_setting & 0x0020) { + static const int alts[3] = { 2, 4, 5 }; + + new_alts = alts[data->sco_num - 1]; + } else { + new_alts = data->sco_num; + } + } else if (data->air_mode == HCI_NOTIFY_ENABLE_SCO_TRANSP) { + /* Bluetooth USB spec recommends alt 6 (63 bytes), but + * many adapters do not support it. Alt 1 appears to + * work for all adapters that do not have alt 6, and + * which work with WBS at all. Some devices prefer + * alt 3 (HCI payload >= 60 Bytes let air packet + * data satisfy 60 bytes), requiring + * MTU >= 3 (packets) * 25 (size) - 3 (headers) = 72 + * see also Core spec 5, vol 4, B 2.1.1 & Table 2.1. + */ + if (btusb_find_altsetting(data, 6)) + new_alts = 6; + else if (btusb_find_altsetting(data, 3) && + hdev->sco_mtu >= 72 && + test_bit(BTUSB_USE_ALT3_FOR_WBS, &data->flags)) + new_alts = 3; + else + new_alts = 1; + } + + if (btusb_switch_alt_setting(hdev, new_alts) < 0) + bt_dev_err(hdev, "set USB alt:(%d) failed!", new_alts); + } else { + clear_bit(BTUSB_ISOC_RUNNING, &data->flags); + usb_kill_anchored_urbs(&data->isoc_anchor); + + __set_isoc_interface(hdev, 0); + if (test_and_clear_bit(BTUSB_DID_ISO_RESUME, &data->flags)) + usb_autopm_put_interface(data->isoc ? data->isoc : data->intf); + } +} + +static void btusb_waker(struct work_struct *work) +{ + struct btusb_data *data = container_of(work, struct btusb_data, waker); + int err; + + err = usb_autopm_get_interface(data->intf); + if (err < 0) + return; + + usb_autopm_put_interface(data->intf); +} + +static void btusb_rx_work(struct work_struct *work) +{ + struct btusb_data *data = container_of(work, struct btusb_data, + rx_work.work); + struct sk_buff *skb; + + /* Dequeue ACL data received during the interval */ + while ((skb = skb_dequeue(&data->acl_q))) + data->recv_acl(data->hdev, skb); +} + +static int btusb_setup_bcm92035(struct hci_dev *hdev) +{ + struct sk_buff *skb; + u8 val = 0x00; + + BT_DBG("%s", hdev->name); + + skb = __hci_cmd_sync(hdev, 0xfc3b, 1, &val, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) + bt_dev_err(hdev, "BCM92035 command failed (%ld)", PTR_ERR(skb)); + else + kfree_skb(skb); + + return 0; +} + +static int btusb_setup_csr(struct hci_dev *hdev) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + u16 bcdDevice = le16_to_cpu(data->udev->descriptor.bcdDevice); + struct hci_rp_read_local_version *rp; + struct sk_buff *skb; + bool is_fake = false; + int ret; + + BT_DBG("%s", hdev->name); + + skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + int err = PTR_ERR(skb); + bt_dev_err(hdev, "CSR: Local version failed (%d)", err); + return err; + } + + if (skb->len != sizeof(struct hci_rp_read_local_version)) { + bt_dev_err(hdev, "CSR: Local version length mismatch"); + kfree_skb(skb); + return -EIO; + } + + rp = (struct hci_rp_read_local_version *)skb->data; + + bt_dev_info(hdev, "CSR: Setting up dongle with HCI ver=%u rev=%04x; LMP ver=%u subver=%04x; manufacturer=%u", + le16_to_cpu(rp->hci_ver), le16_to_cpu(rp->hci_rev), + le16_to_cpu(rp->lmp_ver), le16_to_cpu(rp->lmp_subver), + le16_to_cpu(rp->manufacturer)); + + /* Detect a wide host of Chinese controllers that aren't CSR. + * + * Known fake bcdDevices: 0x0100, 0x0134, 0x1915, 0x2520, 0x7558, 0x8891 + * + * The main thing they have in common is that these are really popular low-cost + * options that support newer Bluetooth versions but rely on heavy VID/PID + * squatting of this poor old Bluetooth 1.1 device. Even sold as such. + * + * We detect actual CSR devices by checking that the HCI manufacturer code + * is Cambridge Silicon Radio (10) and ensuring that LMP sub-version and + * HCI rev values always match. As they both store the firmware number. + */ + if (le16_to_cpu(rp->manufacturer) != 10 || + le16_to_cpu(rp->hci_rev) != le16_to_cpu(rp->lmp_subver)) + is_fake = true; + + /* Known legit CSR firmware build numbers and their supported BT versions: + * - 1.1 (0x1) -> 0x0073, 0x020d, 0x033c, 0x034e + * - 1.2 (0x2) -> 0x04d9, 0x0529 + * - 2.0 (0x3) -> 0x07a6, 0x07ad, 0x0c5c + * - 2.1 (0x4) -> 0x149c, 0x1735, 0x1899 (0x1899 is a BlueCore4-External) + * - 4.0 (0x6) -> 0x1d86, 0x2031, 0x22bb + * + * e.g. Real CSR dongles with LMP subversion 0x73 are old enough that + * support BT 1.1 only; so it's a dead giveaway when some + * third-party BT 4.0 dongle reuses it. + */ + else if (le16_to_cpu(rp->lmp_subver) <= 0x034e && + le16_to_cpu(rp->hci_ver) > BLUETOOTH_VER_1_1) + is_fake = true; + + else if (le16_to_cpu(rp->lmp_subver) <= 0x0529 && + le16_to_cpu(rp->hci_ver) > BLUETOOTH_VER_1_2) + is_fake = true; + + else if (le16_to_cpu(rp->lmp_subver) <= 0x0c5c && + le16_to_cpu(rp->hci_ver) > BLUETOOTH_VER_2_0) + is_fake = true; + + else if (le16_to_cpu(rp->lmp_subver) <= 0x1899 && + le16_to_cpu(rp->hci_ver) > BLUETOOTH_VER_2_1) + is_fake = true; + + else if (le16_to_cpu(rp->lmp_subver) <= 0x22bb && + le16_to_cpu(rp->hci_ver) > BLUETOOTH_VER_4_0) + is_fake = true; + + /* Other clones which beat all the above checks */ + else if (bcdDevice == 0x0134 && + le16_to_cpu(rp->lmp_subver) == 0x0c5c && + le16_to_cpu(rp->hci_ver) == BLUETOOTH_VER_2_0) + is_fake = true; + + if (is_fake) { + bt_dev_warn(hdev, "CSR: Unbranded CSR clone detected; adding workarounds and force-suspending once..."); + + /* Generally these clones have big discrepancies between + * advertised features and what's actually supported. + * Probably will need to be expanded in the future; + * without these the controller will lock up. + */ + set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks); + set_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks); + set_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks); + set_bit(HCI_QUIRK_NO_SUSPEND_NOTIFIER, &hdev->quirks); + + /* Clear the reset quirk since this is not an actual + * early Bluetooth 1.1 device from CSR. + */ + clear_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks); + clear_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks); + + /* + * Special workaround for these BT 4.0 chip clones, and potentially more: + * + * - 0x0134: a Barrot 8041a02 (HCI rev: 0x0810 sub: 0x1012) + * - 0x7558: IC markings FR3191AHAL 749H15143 (HCI rev/sub-version: 0x0709) + * + * These controllers are really messed-up. + * + * 1. Their bulk RX endpoint will never report any data unless + * the device was suspended at least once (yes, really). + * 2. They will not wakeup when autosuspended and receiving data + * on their bulk RX endpoint from e.g. a keyboard or mouse + * (IOW remote-wakeup support is broken for the bulk endpoint). + * + * To fix 1. enable runtime-suspend, force-suspend the + * HCI and then wake-it up by disabling runtime-suspend. + * + * To fix 2. clear the HCI's can_wake flag, this way the HCI + * will still be autosuspended when it is not open. + * + * -- + * + * Because these are widespread problems we prefer generic solutions; so + * apply this initialization quirk to every controller that gets here, + * it should be harmless. The alternative is to not work at all. + */ + pm_runtime_allow(&data->udev->dev); + + ret = pm_runtime_suspend(&data->udev->dev); + if (ret >= 0) + msleep(200); + else + bt_dev_warn(hdev, "CSR: Couldn't suspend the device for our Barrot 8041a02 receive-issue workaround"); + + pm_runtime_forbid(&data->udev->dev); + + device_set_wakeup_capable(&data->udev->dev, false); + + /* Re-enable autosuspend if this was requested */ + if (enable_autosuspend) + usb_enable_autosuspend(data->udev); + } + + kfree_skb(skb); + + return 0; +} + +static int inject_cmd_complete(struct hci_dev *hdev, __u16 opcode) +{ + struct sk_buff *skb; + struct hci_event_hdr *hdr; + struct hci_ev_cmd_complete *evt; + + skb = bt_skb_alloc(sizeof(*hdr) + sizeof(*evt) + 1, GFP_KERNEL); + if (!skb) + return -ENOMEM; + + hdr = skb_put(skb, sizeof(*hdr)); + hdr->evt = HCI_EV_CMD_COMPLETE; + hdr->plen = sizeof(*evt) + 1; + + evt = skb_put(skb, sizeof(*evt)); + evt->ncmd = 0x01; + evt->opcode = cpu_to_le16(opcode); + + skb_put_u8(skb, 0x00); + + hci_skb_pkt_type(skb) = HCI_EVENT_PKT; + + return hci_recv_frame(hdev, skb); +} + +static int btusb_recv_bulk_intel(struct btusb_data *data, void *buffer, + int count) +{ + struct hci_dev *hdev = data->hdev; + + /* When the device is in bootloader mode, then it can send + * events via the bulk endpoint. These events are treated the + * same way as the ones received from the interrupt endpoint. + */ + if (btintel_test_flag(hdev, INTEL_BOOTLOADER)) + return btusb_recv_intr(data, buffer, count); + + return btusb_recv_bulk(data, buffer, count); +} + +static int btusb_recv_event_intel(struct hci_dev *hdev, struct sk_buff *skb) +{ + if (btintel_test_flag(hdev, INTEL_BOOTLOADER)) { + struct hci_event_hdr *hdr = (void *)skb->data; + + if (skb->len > HCI_EVENT_HDR_SIZE && hdr->evt == 0xff && + hdr->plen > 0) { + const void *ptr = skb->data + HCI_EVENT_HDR_SIZE + 1; + unsigned int len = skb->len - HCI_EVENT_HDR_SIZE - 1; + + switch (skb->data[2]) { + case 0x02: + /* When switching to the operational firmware + * the device sends a vendor specific event + * indicating that the bootup completed. + */ + btintel_bootup(hdev, ptr, len); + break; + case 0x06: + /* When the firmware loading completes the + * device sends out a vendor specific event + * indicating the result of the firmware + * loading. + */ + btintel_secure_send_result(hdev, ptr, len); + break; + } + } + } + + return hci_recv_frame(hdev, skb); +} + +static int btusb_send_frame_intel(struct hci_dev *hdev, struct sk_buff *skb) +{ + struct urb *urb; + + BT_DBG("%s", hdev->name); + + switch (hci_skb_pkt_type(skb)) { + case HCI_COMMAND_PKT: + if (btintel_test_flag(hdev, INTEL_BOOTLOADER)) { + struct hci_command_hdr *cmd = (void *)skb->data; + __u16 opcode = le16_to_cpu(cmd->opcode); + + /* When in bootloader mode and the command 0xfc09 + * is received, it needs to be send down the + * bulk endpoint. So allocate a bulk URB instead. + */ + if (opcode == 0xfc09) + urb = alloc_bulk_urb(hdev, skb); + else + urb = alloc_ctrl_urb(hdev, skb); + + /* When the 0xfc01 command is issued to boot into + * the operational firmware, it will actually not + * send a command complete event. To keep the flow + * control working inject that event here. + */ + if (opcode == 0xfc01) + inject_cmd_complete(hdev, opcode); + } else { + urb = alloc_ctrl_urb(hdev, skb); + } + if (IS_ERR(urb)) + return PTR_ERR(urb); + + hdev->stat.cmd_tx++; + return submit_or_queue_tx_urb(hdev, urb); + + case HCI_ACLDATA_PKT: + urb = alloc_bulk_urb(hdev, skb); + if (IS_ERR(urb)) + return PTR_ERR(urb); + + hdev->stat.acl_tx++; + return submit_or_queue_tx_urb(hdev, urb); + + case HCI_SCODATA_PKT: + if (hci_conn_num(hdev, SCO_LINK) < 1) + return -ENODEV; + + urb = alloc_isoc_urb(hdev, skb); + if (IS_ERR(urb)) + return PTR_ERR(urb); + + hdev->stat.sco_tx++; + return submit_tx_urb(hdev, urb); + + case HCI_ISODATA_PKT: + urb = alloc_bulk_urb(hdev, skb); + if (IS_ERR(urb)) + return PTR_ERR(urb); + + return submit_or_queue_tx_urb(hdev, urb); + } + + return -EILSEQ; +} + +/* UHW CR mapping */ +#define MTK_BT_MISC 0x70002510 +#define MTK_BT_SUBSYS_RST 0x70002610 +#define MTK_UDMA_INT_STA_BT 0x74000024 +#define MTK_UDMA_INT_STA_BT1 0x74000308 +#define MTK_BT_WDT_STATUS 0x740003A0 +#define MTK_EP_RST_OPT 0x74011890 +#define MTK_EP_RST_IN_OUT_OPT 0x00010001 +#define MTK_BT_RST_DONE 0x00000100 +#define MTK_BT_RESET_WAIT_MS 100 +#define MTK_BT_RESET_NUM_TRIES 10 + +static void btusb_mtk_wmt_recv(struct urb *urb) +{ + struct hci_dev *hdev = urb->context; + struct btusb_data *data = hci_get_drvdata(hdev); + struct sk_buff *skb; + int err; + + if (urb->status == 0 && urb->actual_length > 0) { + hdev->stat.byte_rx += urb->actual_length; + + /* WMT event shouldn't be fragmented and the size should be + * less than HCI_WMT_MAX_EVENT_SIZE. + */ + skb = bt_skb_alloc(HCI_WMT_MAX_EVENT_SIZE, GFP_ATOMIC); + if (!skb) { + hdev->stat.err_rx++; + kfree(urb->setup_packet); + return; + } + + hci_skb_pkt_type(skb) = HCI_EVENT_PKT; + skb_put_data(skb, urb->transfer_buffer, urb->actual_length); + + /* When someone waits for the WMT event, the skb is being cloned + * and being processed the events from there then. + */ + if (test_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags)) { + data->evt_skb = skb_clone(skb, GFP_ATOMIC); + if (!data->evt_skb) { + kfree_skb(skb); + kfree(urb->setup_packet); + return; + } + } + + err = hci_recv_frame(hdev, skb); + if (err < 0) { + kfree_skb(data->evt_skb); + data->evt_skb = NULL; + kfree(urb->setup_packet); + return; + } + + if (test_and_clear_bit(BTUSB_TX_WAIT_VND_EVT, + &data->flags)) { + /* Barrier to sync with other CPUs */ + smp_mb__after_atomic(); + wake_up_bit(&data->flags, + BTUSB_TX_WAIT_VND_EVT); + } + kfree(urb->setup_packet); + return; + } else if (urb->status == -ENOENT) { + /* Avoid suspend failed when usb_kill_urb */ + return; + } + + usb_mark_last_busy(data->udev); + + /* The URB complete handler is still called with urb->actual_length = 0 + * when the event is not available, so we should keep re-submitting + * URB until WMT event returns, Also, It's necessary to wait some time + * between the two consecutive control URBs to relax the target device + * to generate the event. Otherwise, the WMT event cannot return from + * the device successfully. + */ + udelay(500); + + usb_anchor_urb(urb, &data->ctrl_anchor); + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err < 0) { + kfree(urb->setup_packet); + /* -EPERM: urb is being killed; + * -ENODEV: device got disconnected + */ + if (err != -EPERM && err != -ENODEV) + bt_dev_err(hdev, "urb %p failed to resubmit (%d)", + urb, -err); + usb_unanchor_urb(urb); + } +} + +static int btusb_mtk_submit_wmt_recv_urb(struct hci_dev *hdev) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + struct usb_ctrlrequest *dr; + unsigned char *buf; + int err, size = 64; + unsigned int pipe; + struct urb *urb; + + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) + return -ENOMEM; + + dr = kmalloc(sizeof(*dr), GFP_KERNEL); + if (!dr) { + usb_free_urb(urb); + return -ENOMEM; + } + + dr->bRequestType = USB_TYPE_VENDOR | USB_DIR_IN; + dr->bRequest = 1; + dr->wIndex = cpu_to_le16(0); + dr->wValue = cpu_to_le16(48); + dr->wLength = cpu_to_le16(size); + + buf = kmalloc(size, GFP_KERNEL); + if (!buf) { + kfree(dr); + usb_free_urb(urb); + return -ENOMEM; + } + + pipe = usb_rcvctrlpipe(data->udev, 0); + + usb_fill_control_urb(urb, data->udev, pipe, (void *)dr, + buf, size, btusb_mtk_wmt_recv, hdev); + + urb->transfer_flags |= URB_FREE_BUFFER; + + usb_anchor_urb(urb, &data->ctrl_anchor); + err = usb_submit_urb(urb, GFP_KERNEL); + if (err < 0) { + if (err != -EPERM && err != -ENODEV) + bt_dev_err(hdev, "urb %p submission failed (%d)", + urb, -err); + usb_unanchor_urb(urb); + } + + usb_free_urb(urb); + + return err; +} + +static int btusb_mtk_hci_wmt_sync(struct hci_dev *hdev, + struct btmtk_hci_wmt_params *wmt_params) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + struct btmtk_hci_wmt_evt_funcc *wmt_evt_funcc; + u32 hlen, status = BTMTK_WMT_INVALID; + struct btmtk_hci_wmt_evt *wmt_evt; + struct btmtk_hci_wmt_cmd *wc; + struct btmtk_wmt_hdr *hdr; + int err; + + /* Send the WMT command and wait until the WMT event returns */ + hlen = sizeof(*hdr) + wmt_params->dlen; + if (hlen > 255) + return -EINVAL; + + wc = kzalloc(hlen, GFP_KERNEL); + if (!wc) + return -ENOMEM; + + hdr = &wc->hdr; + hdr->dir = 1; + hdr->op = wmt_params->op; + hdr->dlen = cpu_to_le16(wmt_params->dlen + 1); + hdr->flag = wmt_params->flag; + memcpy(wc->data, wmt_params->data, wmt_params->dlen); + + set_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags); + + /* WMT cmd/event doesn't follow up the generic HCI cmd/event handling, + * it needs constantly polling control pipe until the host received the + * WMT event, thus, we should require to specifically acquire PM counter + * on the USB to prevent the interface from entering auto suspended + * while WMT cmd/event in progress. + */ + err = usb_autopm_get_interface(data->intf); + if (err < 0) + goto err_free_wc; + + err = __hci_cmd_send(hdev, 0xfc6f, hlen, wc); + + if (err < 0) { + clear_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags); + usb_autopm_put_interface(data->intf); + goto err_free_wc; + } + + /* Submit control IN URB on demand to process the WMT event */ + err = btusb_mtk_submit_wmt_recv_urb(hdev); + + usb_autopm_put_interface(data->intf); + + if (err < 0) + goto err_free_wc; + + /* The vendor specific WMT commands are all answered by a vendor + * specific event and will have the Command Status or Command + * Complete as with usual HCI command flow control. + * + * After sending the command, wait for BTUSB_TX_WAIT_VND_EVT + * state to be cleared. The driver specific event receive routine + * will clear that state and with that indicate completion of the + * WMT command. + */ + err = wait_on_bit_timeout(&data->flags, BTUSB_TX_WAIT_VND_EVT, + TASK_INTERRUPTIBLE, HCI_INIT_TIMEOUT); + if (err == -EINTR) { + bt_dev_err(hdev, "Execution of wmt command interrupted"); + clear_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags); + goto err_free_wc; + } + + if (err) { + bt_dev_err(hdev, "Execution of wmt command timed out"); + clear_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags); + err = -ETIMEDOUT; + goto err_free_wc; + } + + if (data->evt_skb == NULL) + goto err_free_wc; + + /* Parse and handle the return WMT event */ + wmt_evt = (struct btmtk_hci_wmt_evt *)data->evt_skb->data; + if (wmt_evt->whdr.op != hdr->op) { + bt_dev_err(hdev, "Wrong op received %d expected %d", + wmt_evt->whdr.op, hdr->op); + err = -EIO; + goto err_free_skb; + } + + switch (wmt_evt->whdr.op) { + case BTMTK_WMT_SEMAPHORE: + if (wmt_evt->whdr.flag == 2) + status = BTMTK_WMT_PATCH_UNDONE; + else + status = BTMTK_WMT_PATCH_DONE; + break; + case BTMTK_WMT_FUNC_CTRL: + wmt_evt_funcc = (struct btmtk_hci_wmt_evt_funcc *)wmt_evt; + if (be16_to_cpu(wmt_evt_funcc->status) == 0x404) + status = BTMTK_WMT_ON_DONE; + else if (be16_to_cpu(wmt_evt_funcc->status) == 0x420) + status = BTMTK_WMT_ON_PROGRESS; + else + status = BTMTK_WMT_ON_UNDONE; + break; + case BTMTK_WMT_PATCH_DWNLD: + if (wmt_evt->whdr.flag == 2) + status = BTMTK_WMT_PATCH_DONE; + else if (wmt_evt->whdr.flag == 1) + status = BTMTK_WMT_PATCH_PROGRESS; + else + status = BTMTK_WMT_PATCH_UNDONE; + break; + } + + if (wmt_params->status) + *wmt_params->status = status; + +err_free_skb: + kfree_skb(data->evt_skb); + data->evt_skb = NULL; +err_free_wc: + kfree(wc); + return err; +} + +static int btusb_mtk_func_query(struct hci_dev *hdev) +{ + struct btmtk_hci_wmt_params wmt_params; + int status, err; + u8 param = 0; + + /* Query whether the function is enabled */ + wmt_params.op = BTMTK_WMT_FUNC_CTRL; + wmt_params.flag = 4; + wmt_params.dlen = sizeof(param); + wmt_params.data = ¶m; + wmt_params.status = &status; + + err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params); + if (err < 0) { + bt_dev_err(hdev, "Failed to query function status (%d)", err); + return err; + } + + return status; +} + +static int btusb_mtk_uhw_reg_write(struct btusb_data *data, u32 reg, u32 val) +{ + struct hci_dev *hdev = data->hdev; + int pipe, err; + void *buf; + + buf = kzalloc(4, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + put_unaligned_le32(val, buf); + + pipe = usb_sndctrlpipe(data->udev, 0); + err = usb_control_msg(data->udev, pipe, 0x02, + 0x5E, + reg >> 16, reg & 0xffff, + buf, 4, USB_CTRL_SET_TIMEOUT); + if (err < 0) { + bt_dev_err(hdev, "Failed to write uhw reg(%d)", err); + goto err_free_buf; + } + +err_free_buf: + kfree(buf); + + return err; +} + +static int btusb_mtk_uhw_reg_read(struct btusb_data *data, u32 reg, u32 *val) +{ + struct hci_dev *hdev = data->hdev; + int pipe, err; + void *buf; + + buf = kzalloc(4, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + pipe = usb_rcvctrlpipe(data->udev, 0); + err = usb_control_msg(data->udev, pipe, 0x01, + 0xDE, + reg >> 16, reg & 0xffff, + buf, 4, USB_CTRL_SET_TIMEOUT); + if (err < 0) { + bt_dev_err(hdev, "Failed to read uhw reg(%d)", err); + goto err_free_buf; + } + + *val = get_unaligned_le32(buf); + bt_dev_dbg(hdev, "reg=%x, value=0x%08x", reg, *val); + +err_free_buf: + kfree(buf); + + return err; +} + +static int btusb_mtk_reg_read(struct btusb_data *data, u32 reg, u32 *val) +{ + int pipe, err, size = sizeof(u32); + void *buf; + + buf = kzalloc(size, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + pipe = usb_rcvctrlpipe(data->udev, 0); + err = usb_control_msg(data->udev, pipe, 0x63, + USB_TYPE_VENDOR | USB_DIR_IN, + reg >> 16, reg & 0xffff, + buf, size, USB_CTRL_SET_TIMEOUT); + if (err < 0) + goto err_free_buf; + + *val = get_unaligned_le32(buf); + +err_free_buf: + kfree(buf); + + return err; +} + +static int btusb_mtk_id_get(struct btusb_data *data, u32 reg, u32 *id) +{ + return btusb_mtk_reg_read(data, reg, id); +} + +static int btusb_mtk_setup(struct hci_dev *hdev) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + struct btmtk_hci_wmt_params wmt_params; + ktime_t calltime, delta, rettime; + struct btmtk_tci_sleep tci_sleep; + unsigned long long duration; + struct sk_buff *skb; + const char *fwname; + int err, status; + u32 dev_id; + char fw_bin_name[64]; + u32 fw_version = 0; + u8 param; + + calltime = ktime_get(); + + err = btusb_mtk_id_get(data, 0x80000008, &dev_id); + if (err < 0) { + bt_dev_err(hdev, "Failed to get device id (%d)", err); + return err; + } + + if (!dev_id) { + err = btusb_mtk_id_get(data, 0x70010200, &dev_id); + if (err < 0) { + bt_dev_err(hdev, "Failed to get device id (%d)", err); + return err; + } + err = btusb_mtk_id_get(data, 0x80021004, &fw_version); + if (err < 0) { + bt_dev_err(hdev, "Failed to get fw version (%d)", err); + return err; + } + } + + switch (dev_id) { + case 0x7663: + fwname = FIRMWARE_MT7663; + break; + case 0x7668: + fwname = FIRMWARE_MT7668; + break; + case 0x7922: + case 0x7961: + snprintf(fw_bin_name, sizeof(fw_bin_name), + "mediatek/BT_RAM_CODE_MT%04x_1_%x_hdr.bin", + dev_id & 0xffff, (fw_version & 0xff) + 1); + err = btmtk_setup_firmware_79xx(hdev, fw_bin_name, + btusb_mtk_hci_wmt_sync); + if (err < 0) { + bt_dev_err(hdev, "Failed to set up firmware (%d)", err); + return err; + } + + /* It's Device EndPoint Reset Option Register */ + btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, MTK_EP_RST_IN_OUT_OPT); + + /* Enable Bluetooth protocol */ + param = 1; + wmt_params.op = BTMTK_WMT_FUNC_CTRL; + wmt_params.flag = 0; + wmt_params.dlen = sizeof(param); + wmt_params.data = ¶m; + wmt_params.status = NULL; + + err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params); + if (err < 0) { + bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err); + return err; + } + + hci_set_msft_opcode(hdev, 0xFD30); + hci_set_aosp_capable(hdev); + goto done; + default: + bt_dev_err(hdev, "Unsupported hardware variant (%08x)", + dev_id); + return -ENODEV; + } + + /* Query whether the firmware is already download */ + wmt_params.op = BTMTK_WMT_SEMAPHORE; + wmt_params.flag = 1; + wmt_params.dlen = 0; + wmt_params.data = NULL; + wmt_params.status = &status; + + err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params); + if (err < 0) { + bt_dev_err(hdev, "Failed to query firmware status (%d)", err); + return err; + } + + if (status == BTMTK_WMT_PATCH_DONE) { + bt_dev_info(hdev, "firmware already downloaded"); + goto ignore_setup_fw; + } + + /* Setup a firmware which the device definitely requires */ + err = btmtk_setup_firmware(hdev, fwname, + btusb_mtk_hci_wmt_sync); + if (err < 0) + return err; + +ignore_setup_fw: + err = readx_poll_timeout(btusb_mtk_func_query, hdev, status, + status < 0 || status != BTMTK_WMT_ON_PROGRESS, + 2000, 5000000); + /* -ETIMEDOUT happens */ + if (err < 0) + return err; + + /* The other errors happen in btusb_mtk_func_query */ + if (status < 0) + return status; + + if (status == BTMTK_WMT_ON_DONE) { + bt_dev_info(hdev, "function already on"); + goto ignore_func_on; + } + + /* Enable Bluetooth protocol */ + param = 1; + wmt_params.op = BTMTK_WMT_FUNC_CTRL; + wmt_params.flag = 0; + wmt_params.dlen = sizeof(param); + wmt_params.data = ¶m; + wmt_params.status = NULL; + + err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params); + if (err < 0) { + bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err); + return err; + } + +ignore_func_on: + /* Apply the low power environment setup */ + tci_sleep.mode = 0x5; + tci_sleep.duration = cpu_to_le16(0x640); + tci_sleep.host_duration = cpu_to_le16(0x640); + tci_sleep.host_wakeup_pin = 0; + tci_sleep.time_compensation = 0; + + skb = __hci_cmd_sync(hdev, 0xfc7a, sizeof(tci_sleep), &tci_sleep, + HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + err = PTR_ERR(skb); + bt_dev_err(hdev, "Failed to apply low power setting (%d)", err); + return err; + } + kfree_skb(skb); + +done: + rettime = ktime_get(); + delta = ktime_sub(rettime, calltime); + duration = (unsigned long long)ktime_to_ns(delta) >> 10; + + bt_dev_info(hdev, "Device setup in %llu usecs", duration); + + return 0; +} + +static int btusb_mtk_shutdown(struct hci_dev *hdev) +{ + struct btmtk_hci_wmt_params wmt_params; + u8 param = 0; + int err; + + /* Disable the device */ + wmt_params.op = BTMTK_WMT_FUNC_CTRL; + wmt_params.flag = 0; + wmt_params.dlen = sizeof(param); + wmt_params.data = ¶m; + wmt_params.status = NULL; + + err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params); + if (err < 0) { + bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err); + return err; + } + + return 0; +} + +static void btusb_mtk_cmd_timeout(struct hci_dev *hdev) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + u32 val; + int err, retry = 0; + + /* It's MediaTek specific bluetooth reset mechanism via USB */ + if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) { + bt_dev_err(hdev, "last reset failed? Not resetting again"); + return; + } + + err = usb_autopm_get_interface(data->intf); + if (err < 0) + return; + + btusb_stop_traffic(data); + usb_kill_anchored_urbs(&data->tx_anchor); + + /* It's Device EndPoint Reset Option Register */ + bt_dev_dbg(hdev, "Initiating reset mechanism via uhw"); + btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, MTK_EP_RST_IN_OUT_OPT); + btusb_mtk_uhw_reg_read(data, MTK_BT_WDT_STATUS, &val); + + /* Reset the bluetooth chip via USB interface. */ + btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 1); + btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT, 0x000000FF); + btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT, &val); + btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT1, 0x000000FF); + btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT1, &val); + /* MT7921 need to delay 20ms between toggle reset bit */ + msleep(20); + btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 0); + btusb_mtk_uhw_reg_read(data, MTK_BT_SUBSYS_RST, &val); + + /* Poll the register until reset is completed */ + do { + btusb_mtk_uhw_reg_read(data, MTK_BT_MISC, &val); + if (val & MTK_BT_RST_DONE) { + bt_dev_dbg(hdev, "Bluetooth Reset Successfully"); + break; + } + + bt_dev_dbg(hdev, "Polling Bluetooth Reset CR"); + retry++; + msleep(MTK_BT_RESET_WAIT_MS); + } while (retry < MTK_BT_RESET_NUM_TRIES); + + btusb_mtk_id_get(data, 0x70010200, &val); + if (!val) + bt_dev_err(hdev, "Can't get device id, subsys reset fail."); + + usb_queue_reset_device(data->intf); + + clear_bit(BTUSB_HW_RESET_ACTIVE, &data->flags); +} + +static int btusb_recv_acl_mtk(struct hci_dev *hdev, struct sk_buff *skb) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + u16 handle = le16_to_cpu(hci_acl_hdr(skb)->handle); + + switch (handle) { + case 0xfc6f: /* Firmware dump from device */ + /* When the firmware hangs, the device can no longer + * suspend and thus disable auto-suspend. + */ + usb_disable_autosuspend(data->udev); + fallthrough; + case 0x05ff: /* Firmware debug logging 1 */ + case 0x05fe: /* Firmware debug logging 2 */ + return hci_recv_diag(hdev, skb); + } + + return hci_recv_frame(hdev, skb); +} + +#ifdef CONFIG_PM +/* Configure an out-of-band gpio as wake-up pin, if specified in device tree */ +static int marvell_config_oob_wake(struct hci_dev *hdev) +{ + struct sk_buff *skb; + struct btusb_data *data = hci_get_drvdata(hdev); + struct device *dev = &data->udev->dev; + u16 pin, gap, opcode; + int ret; + u8 cmd[5]; + + /* Move on if no wakeup pin specified */ + if (of_property_read_u16(dev->of_node, "marvell,wakeup-pin", &pin) || + of_property_read_u16(dev->of_node, "marvell,wakeup-gap-ms", &gap)) + return 0; + + /* Vendor specific command to configure a GPIO as wake-up pin */ + opcode = hci_opcode_pack(0x3F, 0x59); + cmd[0] = opcode & 0xFF; + cmd[1] = opcode >> 8; + cmd[2] = 2; /* length of parameters that follow */ + cmd[3] = pin; + cmd[4] = gap; /* time in ms, for which wakeup pin should be asserted */ + + skb = bt_skb_alloc(sizeof(cmd), GFP_KERNEL); + if (!skb) { + bt_dev_err(hdev, "%s: No memory", __func__); + return -ENOMEM; + } + + skb_put_data(skb, cmd, sizeof(cmd)); + hci_skb_pkt_type(skb) = HCI_COMMAND_PKT; + + ret = btusb_send_frame(hdev, skb); + if (ret) { + bt_dev_err(hdev, "%s: configuration failed", __func__); + kfree_skb(skb); + return ret; + } + + return 0; +} +#endif + +static int btusb_set_bdaddr_marvell(struct hci_dev *hdev, + const bdaddr_t *bdaddr) +{ + struct sk_buff *skb; + u8 buf[8]; + long ret; + + buf[0] = 0xfe; + buf[1] = sizeof(bdaddr_t); + memcpy(buf + 2, bdaddr, sizeof(bdaddr_t)); + + skb = __hci_cmd_sync(hdev, 0xfc22, sizeof(buf), buf, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + ret = PTR_ERR(skb); + bt_dev_err(hdev, "changing Marvell device address failed (%ld)", + ret); + return ret; + } + kfree_skb(skb); + + return 0; +} + +static int btusb_set_bdaddr_ath3012(struct hci_dev *hdev, + const bdaddr_t *bdaddr) +{ + struct sk_buff *skb; + u8 buf[10]; + long ret; + + buf[0] = 0x01; + buf[1] = 0x01; + buf[2] = 0x00; + buf[3] = sizeof(bdaddr_t); + memcpy(buf + 4, bdaddr, sizeof(bdaddr_t)); + + skb = __hci_cmd_sync(hdev, 0xfc0b, sizeof(buf), buf, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + ret = PTR_ERR(skb); + bt_dev_err(hdev, "Change address command failed (%ld)", ret); + return ret; + } + kfree_skb(skb); + + return 0; +} + +static int btusb_set_bdaddr_wcn6855(struct hci_dev *hdev, + const bdaddr_t *bdaddr) +{ + struct sk_buff *skb; + u8 buf[6]; + long ret; + + memcpy(buf, bdaddr, sizeof(bdaddr_t)); + + skb = __hci_cmd_sync_ev(hdev, 0xfc14, sizeof(buf), buf, + HCI_EV_CMD_COMPLETE, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + ret = PTR_ERR(skb); + bt_dev_err(hdev, "Change address command failed (%ld)", ret); + return ret; + } + kfree_skb(skb); + + return 0; +} + +#define QCA_DFU_PACKET_LEN 4096 + +#define QCA_GET_TARGET_VERSION 0x09 +#define QCA_CHECK_STATUS 0x05 +#define QCA_DFU_DOWNLOAD 0x01 + +#define QCA_SYSCFG_UPDATED 0x40 +#define QCA_PATCH_UPDATED 0x80 +#define QCA_DFU_TIMEOUT 3000 +#define QCA_FLAG_MULTI_NVM 0x80 +#define QCA_BT_RESET_WAIT_MS 100 + +#define WCN6855_2_0_RAM_VERSION_GF 0x400c1200 +#define WCN6855_2_1_RAM_VERSION_GF 0x400c1211 + +struct qca_version { + __le32 rom_version; + __le32 patch_version; + __le32 ram_version; + __u8 chip_id; + __u8 platform_id; + __le16 flag; + __u8 reserved[4]; +} __packed; + +struct qca_rampatch_version { + __le16 rom_version_high; + __le16 rom_version_low; + __le16 patch_version; +} __packed; + +struct qca_device_info { + u32 rom_version; + u8 rampatch_hdr; /* length of header in rampatch */ + u8 nvm_hdr; /* length of header in NVM */ + u8 ver_offset; /* offset of version structure in rampatch */ +}; + +static const struct qca_device_info qca_devices_table[] = { + { 0x00000100, 20, 4, 8 }, /* Rome 1.0 */ + { 0x00000101, 20, 4, 8 }, /* Rome 1.1 */ + { 0x00000200, 28, 4, 16 }, /* Rome 2.0 */ + { 0x00000201, 28, 4, 16 }, /* Rome 2.1 */ + { 0x00000300, 28, 4, 16 }, /* Rome 3.0 */ + { 0x00000302, 28, 4, 16 }, /* Rome 3.2 */ + { 0x00130100, 40, 4, 16 }, /* WCN6855 1.0 */ + { 0x00130200, 40, 4, 16 }, /* WCN6855 2.0 */ + { 0x00130201, 40, 4, 16 }, /* WCN6855 2.1 */ + { 0x00190200, 40, 4, 16 }, /* WCN785x 2.0 */ +}; + +static int btusb_qca_send_vendor_req(struct usb_device *udev, u8 request, + void *data, u16 size) +{ + int pipe, err; + u8 *buf; + + buf = kmalloc(size, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + /* Found some of USB hosts have IOT issues with ours so that we should + * not wait until HCI layer is ready. + */ + pipe = usb_rcvctrlpipe(udev, 0); + err = usb_control_msg(udev, pipe, request, USB_TYPE_VENDOR | USB_DIR_IN, + 0, 0, buf, size, USB_CTRL_SET_TIMEOUT); + if (err < 0) { + dev_err(&udev->dev, "Failed to access otp area (%d)", err); + goto done; + } + + memcpy(data, buf, size); + +done: + kfree(buf); + + return err; +} + +static int btusb_setup_qca_download_fw(struct hci_dev *hdev, + const struct firmware *firmware, + size_t hdr_size) +{ + struct btusb_data *btdata = hci_get_drvdata(hdev); + struct usb_device *udev = btdata->udev; + size_t count, size, sent = 0; + int pipe, len, err; + u8 *buf; + + buf = kmalloc(QCA_DFU_PACKET_LEN, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + count = firmware->size; + + size = min_t(size_t, count, hdr_size); + memcpy(buf, firmware->data, size); + + /* USB patches should go down to controller through USB path + * because binary format fits to go down through USB channel. + * USB control path is for patching headers and USB bulk is for + * patch body. + */ + pipe = usb_sndctrlpipe(udev, 0); + err = usb_control_msg(udev, pipe, QCA_DFU_DOWNLOAD, USB_TYPE_VENDOR, + 0, 0, buf, size, USB_CTRL_SET_TIMEOUT); + if (err < 0) { + bt_dev_err(hdev, "Failed to send headers (%d)", err); + goto done; + } + + sent += size; + count -= size; + + /* ep2 need time to switch from function acl to function dfu, + * so we add 20ms delay here. + */ + msleep(20); + + while (count) { + size = min_t(size_t, count, QCA_DFU_PACKET_LEN); + + memcpy(buf, firmware->data + sent, size); + + pipe = usb_sndbulkpipe(udev, 0x02); + err = usb_bulk_msg(udev, pipe, buf, size, &len, + QCA_DFU_TIMEOUT); + if (err < 0) { + bt_dev_err(hdev, "Failed to send body at %zd of %zd (%d)", + sent, firmware->size, err); + break; + } + + if (size != len) { + bt_dev_err(hdev, "Failed to get bulk buffer"); + err = -EILSEQ; + break; + } + + sent += size; + count -= size; + } + +done: + kfree(buf); + return err; +} + +static int btusb_setup_qca_load_rampatch(struct hci_dev *hdev, + struct qca_version *ver, + const struct qca_device_info *info) +{ + struct qca_rampatch_version *rver; + const struct firmware *fw; + u32 ver_rom, ver_patch, rver_rom; + u16 rver_rom_low, rver_rom_high, rver_patch; + char fwname[64]; + int err; + + ver_rom = le32_to_cpu(ver->rom_version); + ver_patch = le32_to_cpu(ver->patch_version); + + snprintf(fwname, sizeof(fwname), "qca/rampatch_usb_%08x.bin", ver_rom); + + err = request_firmware(&fw, fwname, &hdev->dev); + if (err) { + bt_dev_err(hdev, "failed to request rampatch file: %s (%d)", + fwname, err); + return err; + } + + bt_dev_info(hdev, "using rampatch file: %s", fwname); + + rver = (struct qca_rampatch_version *)(fw->data + info->ver_offset); + rver_rom_low = le16_to_cpu(rver->rom_version_low); + rver_patch = le16_to_cpu(rver->patch_version); + + if (ver_rom & ~0xffffU) { + rver_rom_high = le16_to_cpu(rver->rom_version_high); + rver_rom = le32_to_cpu(rver_rom_high << 16 | rver_rom_low); + } else { + rver_rom = rver_rom_low; + } + + bt_dev_info(hdev, "QCA: patch rome 0x%x build 0x%x, " + "firmware rome 0x%x build 0x%x", + rver_rom, rver_patch, ver_rom, ver_patch); + + if (rver_rom != ver_rom || rver_patch <= ver_patch) { + bt_dev_err(hdev, "rampatch file version did not match with firmware"); + err = -EINVAL; + goto done; + } + + err = btusb_setup_qca_download_fw(hdev, fw, info->rampatch_hdr); + +done: + release_firmware(fw); + + return err; +} + +static void btusb_generate_qca_nvm_name(char *fwname, size_t max_size, + const struct qca_version *ver) +{ + u32 rom_version = le32_to_cpu(ver->rom_version); + u16 flag = le16_to_cpu(ver->flag); + + if (((flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) { + /* The board_id should be split into two bytes + * The 1st byte is chip ID, and the 2nd byte is platform ID + * For example, board ID 0x010A, 0x01 is platform ID. 0x0A is chip ID + * we have several platforms, and platform IDs are continuously added + * Platform ID: + * 0x00 is for Mobile + * 0x01 is for X86 + * 0x02 is for Automotive + * 0x03 is for Consumer electronic + */ + u16 board_id = (ver->chip_id << 8) + ver->platform_id; + const char *variant; + + switch (le32_to_cpu(ver->ram_version)) { + case WCN6855_2_0_RAM_VERSION_GF: + case WCN6855_2_1_RAM_VERSION_GF: + variant = "_gf"; + break; + default: + variant = ""; + break; + } + + if (board_id == 0) { + snprintf(fwname, max_size, "qca/nvm_usb_%08x%s.bin", + rom_version, variant); + } else { + snprintf(fwname, max_size, "qca/nvm_usb_%08x%s_%04x.bin", + rom_version, variant, board_id); + } + } else { + snprintf(fwname, max_size, "qca/nvm_usb_%08x.bin", + rom_version); + } + +} + +static int btusb_setup_qca_load_nvm(struct hci_dev *hdev, + struct qca_version *ver, + const struct qca_device_info *info) +{ + const struct firmware *fw; + char fwname[64]; + int err; + + btusb_generate_qca_nvm_name(fwname, sizeof(fwname), ver); + + err = request_firmware(&fw, fwname, &hdev->dev); + if (err) { + bt_dev_err(hdev, "failed to request NVM file: %s (%d)", + fwname, err); + return err; + } + + bt_dev_info(hdev, "using NVM file: %s", fwname); + + err = btusb_setup_qca_download_fw(hdev, fw, info->nvm_hdr); + + release_firmware(fw); + + return err; +} + +/* identify the ROM version and check whether patches are needed */ +static bool btusb_qca_need_patch(struct usb_device *udev) +{ + struct qca_version ver; + + if (btusb_qca_send_vendor_req(udev, QCA_GET_TARGET_VERSION, &ver, + sizeof(ver)) < 0) + return false; + /* only low ROM versions need patches */ + return !(le32_to_cpu(ver.rom_version) & ~0xffffU); +} + +static int btusb_setup_qca(struct hci_dev *hdev) +{ + struct btusb_data *btdata = hci_get_drvdata(hdev); + struct usb_device *udev = btdata->udev; + const struct qca_device_info *info = NULL; + struct qca_version ver; + u32 ver_rom; + u8 status; + int i, err; + + err = btusb_qca_send_vendor_req(udev, QCA_GET_TARGET_VERSION, &ver, + sizeof(ver)); + if (err < 0) + return err; + + ver_rom = le32_to_cpu(ver.rom_version); + + for (i = 0; i < ARRAY_SIZE(qca_devices_table); i++) { + if (ver_rom == qca_devices_table[i].rom_version) + info = &qca_devices_table[i]; + } + if (!info) { + /* If the rom_version is not matched in the qca_devices_table + * and the high ROM version is not zero, we assume this chip no + * need to load the rampatch and nvm. + */ + if (ver_rom & ~0xffffU) + return 0; + + bt_dev_err(hdev, "don't support firmware rome 0x%x", ver_rom); + return -ENODEV; + } + + err = btusb_qca_send_vendor_req(udev, QCA_CHECK_STATUS, &status, + sizeof(status)); + if (err < 0) + return err; + + if (!(status & QCA_PATCH_UPDATED)) { + err = btusb_setup_qca_load_rampatch(hdev, &ver, info); + if (err < 0) + return err; + } + + err = btusb_qca_send_vendor_req(udev, QCA_GET_TARGET_VERSION, &ver, + sizeof(ver)); + if (err < 0) + return err; + + if (!(status & QCA_SYSCFG_UPDATED)) { + err = btusb_setup_qca_load_nvm(hdev, &ver, info); + if (err < 0) + return err; + + /* WCN6855 2.1 and later will reset to apply firmware downloaded here, so + * wait ~100ms for reset Done then go ahead, otherwise, it maybe + * cause potential enable failure. + */ + if (info->rom_version >= 0x00130201) + msleep(QCA_BT_RESET_WAIT_MS); + } + + /* Mark HCI_OP_ENHANCED_SETUP_SYNC_CONN as broken as it doesn't seem to + * work with the likes of HSP/HFP mSBC. + */ + set_bit(HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN, &hdev->quirks); + + return 0; +} + +static inline int __set_diag_interface(struct hci_dev *hdev) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + struct usb_interface *intf = data->diag; + int i; + + if (!data->diag) + return -ENODEV; + + data->diag_tx_ep = NULL; + data->diag_rx_ep = NULL; + + for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) { + struct usb_endpoint_descriptor *ep_desc; + + ep_desc = &intf->cur_altsetting->endpoint[i].desc; + + if (!data->diag_tx_ep && usb_endpoint_is_bulk_out(ep_desc)) { + data->diag_tx_ep = ep_desc; + continue; + } + + if (!data->diag_rx_ep && usb_endpoint_is_bulk_in(ep_desc)) { + data->diag_rx_ep = ep_desc; + continue; + } + } + + if (!data->diag_tx_ep || !data->diag_rx_ep) { + bt_dev_err(hdev, "invalid diagnostic descriptors"); + return -ENODEV; + } + + return 0; +} + +static struct urb *alloc_diag_urb(struct hci_dev *hdev, bool enable) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + struct sk_buff *skb; + struct urb *urb; + unsigned int pipe; + + if (!data->diag_tx_ep) + return ERR_PTR(-ENODEV); + + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) + return ERR_PTR(-ENOMEM); + + skb = bt_skb_alloc(2, GFP_KERNEL); + if (!skb) { + usb_free_urb(urb); + return ERR_PTR(-ENOMEM); + } + + skb_put_u8(skb, 0xf0); + skb_put_u8(skb, enable); + + pipe = usb_sndbulkpipe(data->udev, data->diag_tx_ep->bEndpointAddress); + + usb_fill_bulk_urb(urb, data->udev, pipe, + skb->data, skb->len, btusb_tx_complete, skb); + + skb->dev = (void *)hdev; + + return urb; +} + +static int btusb_bcm_set_diag(struct hci_dev *hdev, bool enable) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + struct urb *urb; + + if (!data->diag) + return -ENODEV; + + if (!test_bit(HCI_RUNNING, &hdev->flags)) + return -ENETDOWN; + + urb = alloc_diag_urb(hdev, enable); + if (IS_ERR(urb)) + return PTR_ERR(urb); + + return submit_or_queue_tx_urb(hdev, urb); +} + +#ifdef CONFIG_PM +static irqreturn_t btusb_oob_wake_handler(int irq, void *priv) +{ + struct btusb_data *data = priv; + + pm_wakeup_event(&data->udev->dev, 0); + pm_system_wakeup(); + + /* Disable only if not already disabled (keep it balanced) */ + if (test_and_clear_bit(BTUSB_OOB_WAKE_ENABLED, &data->flags)) { + disable_irq_nosync(irq); + disable_irq_wake(irq); + } + return IRQ_HANDLED; +} + +static const struct of_device_id btusb_match_table[] = { + { .compatible = "usb1286,204e" }, + { .compatible = "usbcf3,e300" }, /* QCA6174A */ + { .compatible = "usb4ca,301a" }, /* QCA6174A (Lite-On) */ + { } +}; +MODULE_DEVICE_TABLE(of, btusb_match_table); + +/* Use an oob wakeup pin? */ +static int btusb_config_oob_wake(struct hci_dev *hdev) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + struct device *dev = &data->udev->dev; + int irq, ret; + + clear_bit(BTUSB_OOB_WAKE_ENABLED, &data->flags); + + if (!of_match_device(btusb_match_table, dev)) + return 0; + + /* Move on if no IRQ specified */ + irq = of_irq_get_byname(dev->of_node, "wakeup"); + if (irq <= 0) { + bt_dev_dbg(hdev, "%s: no OOB Wakeup IRQ in DT", __func__); + return 0; + } + + irq_set_status_flags(irq, IRQ_NOAUTOEN); + ret = devm_request_irq(&hdev->dev, irq, btusb_oob_wake_handler, + 0, "OOB Wake-on-BT", data); + if (ret) { + bt_dev_err(hdev, "%s: IRQ request failed", __func__); + return ret; + } + + ret = device_init_wakeup(dev, true); + if (ret) { + bt_dev_err(hdev, "%s: failed to init_wakeup", __func__); + return ret; + } + + data->oob_wake_irq = irq; + bt_dev_info(hdev, "OOB Wake-on-BT configured at IRQ %u", irq); + return 0; +} +#endif + +static void btusb_check_needs_reset_resume(struct usb_interface *intf) +{ + if (dmi_check_system(btusb_needs_reset_resume_table)) + interface_to_usbdev(intf)->quirks |= USB_QUIRK_RESET_RESUME; +} + +static bool btusb_wakeup(struct hci_dev *hdev) +{ + struct btusb_data *data = hci_get_drvdata(hdev); + + return device_may_wakeup(&data->udev->dev); +} + +static int btusb_shutdown_qca(struct hci_dev *hdev) +{ + struct sk_buff *skb; + + skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + bt_dev_err(hdev, "HCI reset during shutdown failed"); + return PTR_ERR(skb); + } + kfree_skb(skb); + + return 0; +} + +static ssize_t force_poll_sync_read(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct btusb_data *data = file->private_data; + char buf[3]; + + buf[0] = data->poll_sync ? 'Y' : 'N'; + buf[1] = '\n'; + buf[2] = '\0'; + return simple_read_from_buffer(user_buf, count, ppos, buf, 2); +} + +static ssize_t force_poll_sync_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct btusb_data *data = file->private_data; + bool enable; + int err; + + err = kstrtobool_from_user(user_buf, count, &enable); + if (err) + return err; + + /* Only allow changes while the adapter is down */ + if (test_bit(HCI_UP, &data->hdev->flags)) + return -EPERM; + + if (data->poll_sync == enable) + return -EALREADY; + + data->poll_sync = enable; + + return count; +} + +static const struct file_operations force_poll_sync_fops = { + .open = simple_open, + .read = force_poll_sync_read, + .write = force_poll_sync_write, + .llseek = default_llseek, +}; + +static int btusb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_endpoint_descriptor *ep_desc; + struct gpio_desc *reset_gpio; + struct btusb_data *data; + struct hci_dev *hdev; + unsigned ifnum_base; + int i, err, priv_size; + + BT_DBG("intf %p id %p", intf, id); + + /* interface numbers are hardcoded in the spec */ + if (intf->cur_altsetting->desc.bInterfaceNumber != 0) { + if (!(id->driver_info & BTUSB_IFNUM_2)) + return -ENODEV; + if (intf->cur_altsetting->desc.bInterfaceNumber != 2) + return -ENODEV; + } + + ifnum_base = intf->cur_altsetting->desc.bInterfaceNumber; + + if (!id->driver_info) { + const struct usb_device_id *match; + + match = usb_match_id(intf, blacklist_table); + if (match) + id = match; + } + + if (id->driver_info == BTUSB_IGNORE) + return -ENODEV; + + if (id->driver_info & BTUSB_ATH3012) { + struct usb_device *udev = interface_to_usbdev(intf); + + /* Old firmware would otherwise let ath3k driver load + * patch and sysconfig files + */ + if (le16_to_cpu(udev->descriptor.bcdDevice) <= 0x0001 && + !btusb_qca_need_patch(udev)) + return -ENODEV; + } + + data = devm_kzalloc(&intf->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) { + ep_desc = &intf->cur_altsetting->endpoint[i].desc; + + if (!data->intr_ep && usb_endpoint_is_int_in(ep_desc)) { + data->intr_ep = ep_desc; + continue; + } + + if (!data->bulk_tx_ep && usb_endpoint_is_bulk_out(ep_desc)) { + data->bulk_tx_ep = ep_desc; + continue; + } + + if (!data->bulk_rx_ep && usb_endpoint_is_bulk_in(ep_desc)) { + data->bulk_rx_ep = ep_desc; + continue; + } + } + + if (!data->intr_ep || !data->bulk_tx_ep || !data->bulk_rx_ep) + return -ENODEV; + + if (id->driver_info & BTUSB_AMP) { + data->cmdreq_type = USB_TYPE_CLASS | 0x01; + data->cmdreq = 0x2b; + } else { + data->cmdreq_type = USB_TYPE_CLASS; + data->cmdreq = 0x00; + } + + data->udev = interface_to_usbdev(intf); + data->intf = intf; + + INIT_WORK(&data->work, btusb_work); + INIT_WORK(&data->waker, btusb_waker); + INIT_DELAYED_WORK(&data->rx_work, btusb_rx_work); + + skb_queue_head_init(&data->acl_q); + + init_usb_anchor(&data->deferred); + init_usb_anchor(&data->tx_anchor); + spin_lock_init(&data->txlock); + + init_usb_anchor(&data->intr_anchor); + init_usb_anchor(&data->bulk_anchor); + init_usb_anchor(&data->isoc_anchor); + init_usb_anchor(&data->diag_anchor); + init_usb_anchor(&data->ctrl_anchor); + spin_lock_init(&data->rxlock); + + priv_size = 0; + + data->recv_event = hci_recv_frame; + data->recv_bulk = btusb_recv_bulk; + + if (id->driver_info & BTUSB_INTEL_COMBINED) { + /* Allocate extra space for Intel device */ + priv_size += sizeof(struct btintel_data); + + /* Override the rx handlers */ + data->recv_event = btusb_recv_event_intel; + data->recv_bulk = btusb_recv_bulk_intel; + } + + data->recv_acl = hci_recv_frame; + + hdev = hci_alloc_dev_priv(priv_size); + if (!hdev) + return -ENOMEM; + + hdev->bus = HCI_USB; + hci_set_drvdata(hdev, data); + + if (id->driver_info & BTUSB_AMP) + hdev->dev_type = HCI_AMP; + else + hdev->dev_type = HCI_PRIMARY; + + data->hdev = hdev; + + SET_HCIDEV_DEV(hdev, &intf->dev); + + reset_gpio = gpiod_get_optional(&data->udev->dev, "reset", + GPIOD_OUT_LOW); + if (IS_ERR(reset_gpio)) { + err = PTR_ERR(reset_gpio); + goto out_free_dev; + } else if (reset_gpio) { + data->reset_gpio = reset_gpio; + } + + hdev->open = btusb_open; + hdev->close = btusb_close; + hdev->flush = btusb_flush; + hdev->send = btusb_send_frame; + hdev->notify = btusb_notify; + hdev->wakeup = btusb_wakeup; + +#ifdef CONFIG_PM + err = btusb_config_oob_wake(hdev); + if (err) + goto out_free_dev; + + /* Marvell devices may need a specific chip configuration */ + if (id->driver_info & BTUSB_MARVELL && data->oob_wake_irq) { + err = marvell_config_oob_wake(hdev); + if (err) + goto out_free_dev; + } +#endif + if (id->driver_info & BTUSB_CW6622) + set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks); + + if (id->driver_info & BTUSB_BCM2045) + set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks); + + if (id->driver_info & BTUSB_BCM92035) + hdev->setup = btusb_setup_bcm92035; + + if (IS_ENABLED(CONFIG_BT_HCIBTUSB_BCM) && + (id->driver_info & BTUSB_BCM_PATCHRAM)) { + hdev->manufacturer = 15; + hdev->setup = btbcm_setup_patchram; + hdev->set_diag = btusb_bcm_set_diag; + hdev->set_bdaddr = btbcm_set_bdaddr; + + /* Broadcom LM_DIAG Interface numbers are hardcoded */ + data->diag = usb_ifnum_to_if(data->udev, ifnum_base + 2); + } + + if (IS_ENABLED(CONFIG_BT_HCIBTUSB_BCM) && + (id->driver_info & BTUSB_BCM_APPLE)) { + hdev->manufacturer = 15; + hdev->setup = btbcm_setup_apple; + hdev->set_diag = btusb_bcm_set_diag; + + /* Broadcom LM_DIAG Interface numbers are hardcoded */ + data->diag = usb_ifnum_to_if(data->udev, ifnum_base + 2); + } + + /* Combined Intel Device setup to support multiple setup routine */ + if (id->driver_info & BTUSB_INTEL_COMBINED) { + err = btintel_configure_setup(hdev); + if (err) + goto out_free_dev; + + /* Transport specific configuration */ + hdev->send = btusb_send_frame_intel; + hdev->cmd_timeout = btusb_intel_cmd_timeout; + + if (id->driver_info & BTUSB_INTEL_NO_WBS_SUPPORT) + btintel_set_flag(hdev, INTEL_ROM_LEGACY_NO_WBS_SUPPORT); + + if (id->driver_info & BTUSB_INTEL_BROKEN_INITIAL_NCMD) + btintel_set_flag(hdev, INTEL_BROKEN_INITIAL_NCMD); + + if (id->driver_info & BTUSB_INTEL_BROKEN_SHUTDOWN_LED) + btintel_set_flag(hdev, INTEL_BROKEN_SHUTDOWN_LED); + } + + if (id->driver_info & BTUSB_MARVELL) + hdev->set_bdaddr = btusb_set_bdaddr_marvell; + + if (IS_ENABLED(CONFIG_BT_HCIBTUSB_MTK) && + (id->driver_info & BTUSB_MEDIATEK)) { + hdev->setup = btusb_mtk_setup; + hdev->shutdown = btusb_mtk_shutdown; + hdev->manufacturer = 70; + hdev->cmd_timeout = btusb_mtk_cmd_timeout; + hdev->set_bdaddr = btmtk_set_bdaddr; + set_bit(HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN, &hdev->quirks); + set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks); + data->recv_acl = btusb_recv_acl_mtk; + } + + if (id->driver_info & BTUSB_SWAVE) { + set_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE, &hdev->quirks); + set_bit(HCI_QUIRK_BROKEN_LOCAL_COMMANDS, &hdev->quirks); + } + + if (id->driver_info & BTUSB_INTEL_BOOT) { + hdev->manufacturer = 2; + set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks); + } + + if (id->driver_info & BTUSB_ATH3012) { + data->setup_on_usb = btusb_setup_qca; + hdev->set_bdaddr = btusb_set_bdaddr_ath3012; + set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks); + set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks); + } + + if (id->driver_info & BTUSB_QCA_ROME) { + data->setup_on_usb = btusb_setup_qca; + hdev->shutdown = btusb_shutdown_qca; + hdev->set_bdaddr = btusb_set_bdaddr_ath3012; + hdev->cmd_timeout = btusb_qca_cmd_timeout; + set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks); + btusb_check_needs_reset_resume(intf); + } + + if (id->driver_info & BTUSB_QCA_WCN6855) { + data->setup_on_usb = btusb_setup_qca; + hdev->shutdown = btusb_shutdown_qca; + hdev->set_bdaddr = btusb_set_bdaddr_wcn6855; + hdev->cmd_timeout = btusb_qca_cmd_timeout; + set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks); + hci_set_msft_opcode(hdev, 0xFD70); + } + + if (id->driver_info & BTUSB_AMP) { + /* AMP controllers do not support SCO packets */ + data->isoc = NULL; + } else { + /* Interface orders are hardcoded in the specification */ + data->isoc = usb_ifnum_to_if(data->udev, ifnum_base + 1); + data->isoc_ifnum = ifnum_base + 1; + } + + if (IS_ENABLED(CONFIG_BT_HCIBTUSB_RTL) && + (id->driver_info & BTUSB_REALTEK)) { + hdev->setup = btrtl_setup_realtek; + hdev->shutdown = btrtl_shutdown_realtek; + hdev->cmd_timeout = btusb_rtl_cmd_timeout; + + /* Realtek devices need to set remote wakeup on auto-suspend */ + set_bit(BTUSB_WAKEUP_AUTOSUSPEND, &data->flags); + set_bit(BTUSB_USE_ALT3_FOR_WBS, &data->flags); + } + + if (id->driver_info & BTUSB_ACTIONS_SEMI) { + /* Support is advertised, but not implemented */ + set_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks); + set_bit(HCI_QUIRK_BROKEN_READ_TRANSMIT_POWER, &hdev->quirks); + set_bit(HCI_QUIRK_BROKEN_SET_RPA_TIMEOUT, &hdev->quirks); + set_bit(HCI_QUIRK_BROKEN_EXT_SCAN, &hdev->quirks); + } + + if (!reset) + set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks); + + if (force_scofix || id->driver_info & BTUSB_WRONG_SCO_MTU) { + if (!disable_scofix) + set_bit(HCI_QUIRK_FIXUP_BUFFER_SIZE, &hdev->quirks); + } + + if (id->driver_info & BTUSB_BROKEN_ISOC) + data->isoc = NULL; + + if (id->driver_info & BTUSB_WIDEBAND_SPEECH) + set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks); + + if (id->driver_info & BTUSB_VALID_LE_STATES) + set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks); + + if (id->driver_info & BTUSB_DIGIANSWER) { + data->cmdreq_type = USB_TYPE_VENDOR; + set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks); + } + + if (id->driver_info & BTUSB_CSR) { + struct usb_device *udev = data->udev; + u16 bcdDevice = le16_to_cpu(udev->descriptor.bcdDevice); + + /* Old firmware would otherwise execute USB reset */ + if (bcdDevice < 0x117) + set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks); + + /* This must be set first in case we disable it for fakes */ + set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks); + + /* Fake CSR devices with broken commands */ + if (le16_to_cpu(udev->descriptor.idVendor) == 0x0a12 && + le16_to_cpu(udev->descriptor.idProduct) == 0x0001) + hdev->setup = btusb_setup_csr; + } + + if (id->driver_info & BTUSB_SNIFFER) { + struct usb_device *udev = data->udev; + + /* New sniffer firmware has crippled HCI interface */ + if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x997) + set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks); + } + + if (id->driver_info & BTUSB_INTEL_BOOT) { + /* A bug in the bootloader causes that interrupt interface is + * only enabled after receiving SetInterface(0, AltSetting=0). + */ + err = usb_set_interface(data->udev, 0, 0); + if (err < 0) { + BT_ERR("failed to set interface 0, alt 0 %d", err); + goto out_free_dev; + } + } + + if (data->isoc) { + err = usb_driver_claim_interface(&btusb_driver, + data->isoc, data); + if (err < 0) + goto out_free_dev; + } + + if (IS_ENABLED(CONFIG_BT_HCIBTUSB_BCM) && data->diag) { + if (!usb_driver_claim_interface(&btusb_driver, + data->diag, data)) + __set_diag_interface(hdev); + else + data->diag = NULL; + } + + if (enable_autosuspend) + usb_enable_autosuspend(data->udev); + + err = hci_register_dev(hdev); + if (err < 0) + goto out_free_dev; + + usb_set_intfdata(intf, data); + + debugfs_create_file("force_poll_sync", 0644, hdev->debugfs, data, + &force_poll_sync_fops); + + return 0; + +out_free_dev: + if (data->reset_gpio) + gpiod_put(data->reset_gpio); + hci_free_dev(hdev); + return err; +} + +static void btusb_disconnect(struct usb_interface *intf) +{ + struct btusb_data *data = usb_get_intfdata(intf); + struct hci_dev *hdev; + + BT_DBG("intf %p", intf); + + if (!data) + return; + + hdev = data->hdev; + usb_set_intfdata(data->intf, NULL); + + if (data->isoc) + usb_set_intfdata(data->isoc, NULL); + + if (data->diag) + usb_set_intfdata(data->diag, NULL); + + hci_unregister_dev(hdev); + + if (intf == data->intf) { + if (data->isoc) + usb_driver_release_interface(&btusb_driver, data->isoc); + if (data->diag) + usb_driver_release_interface(&btusb_driver, data->diag); + } else if (intf == data->isoc) { + if (data->diag) + usb_driver_release_interface(&btusb_driver, data->diag); + usb_driver_release_interface(&btusb_driver, data->intf); + } else if (intf == data->diag) { + usb_driver_release_interface(&btusb_driver, data->intf); + if (data->isoc) + usb_driver_release_interface(&btusb_driver, data->isoc); + } + + if (data->oob_wake_irq) + device_init_wakeup(&data->udev->dev, false); + + if (data->reset_gpio) + gpiod_put(data->reset_gpio); + + hci_free_dev(hdev); +} + +#ifdef CONFIG_PM +static int btusb_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct btusb_data *data = usb_get_intfdata(intf); + + BT_DBG("intf %p", intf); + + if (data->suspend_count++) + return 0; + + spin_lock_irq(&data->txlock); + if (!(PMSG_IS_AUTO(message) && data->tx_in_flight)) { + set_bit(BTUSB_SUSPENDING, &data->flags); + spin_unlock_irq(&data->txlock); + } else { + spin_unlock_irq(&data->txlock); + data->suspend_count--; + return -EBUSY; + } + + cancel_work_sync(&data->work); + + btusb_stop_traffic(data); + usb_kill_anchored_urbs(&data->tx_anchor); + + if (data->oob_wake_irq && device_may_wakeup(&data->udev->dev)) { + set_bit(BTUSB_OOB_WAKE_ENABLED, &data->flags); + enable_irq_wake(data->oob_wake_irq); + enable_irq(data->oob_wake_irq); + } + + /* For global suspend, Realtek devices lose the loaded fw + * in them. But for autosuspend, firmware should remain. + * Actually, it depends on whether the usb host sends + * set feature (enable wakeup) or not. + */ + if (test_bit(BTUSB_WAKEUP_AUTOSUSPEND, &data->flags)) { + if (PMSG_IS_AUTO(message) && + device_can_wakeup(&data->udev->dev)) + data->udev->do_remote_wakeup = 1; + else if (!PMSG_IS_AUTO(message) && + !device_may_wakeup(&data->udev->dev)) { + data->udev->do_remote_wakeup = 0; + data->udev->reset_resume = 1; + } + } + + return 0; +} + +static void play_deferred(struct btusb_data *data) +{ + struct urb *urb; + int err; + + while ((urb = usb_get_from_anchor(&data->deferred))) { + usb_anchor_urb(urb, &data->tx_anchor); + + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err < 0) { + if (err != -EPERM && err != -ENODEV) + BT_ERR("%s urb %p submission failed (%d)", + data->hdev->name, urb, -err); + kfree(urb->setup_packet); + usb_unanchor_urb(urb); + usb_free_urb(urb); + break; + } + + data->tx_in_flight++; + usb_free_urb(urb); + } + + /* Cleanup the rest deferred urbs. */ + while ((urb = usb_get_from_anchor(&data->deferred))) { + kfree(urb->setup_packet); + usb_free_urb(urb); + } +} + +static int btusb_resume(struct usb_interface *intf) +{ + struct btusb_data *data = usb_get_intfdata(intf); + struct hci_dev *hdev = data->hdev; + int err = 0; + + BT_DBG("intf %p", intf); + + if (--data->suspend_count) + return 0; + + /* Disable only if not already disabled (keep it balanced) */ + if (test_and_clear_bit(BTUSB_OOB_WAKE_ENABLED, &data->flags)) { + disable_irq(data->oob_wake_irq); + disable_irq_wake(data->oob_wake_irq); + } + + if (!test_bit(HCI_RUNNING, &hdev->flags)) + goto done; + + if (test_bit(BTUSB_INTR_RUNNING, &data->flags)) { + err = btusb_submit_intr_urb(hdev, GFP_NOIO); + if (err < 0) { + clear_bit(BTUSB_INTR_RUNNING, &data->flags); + goto failed; + } + } + + if (test_bit(BTUSB_BULK_RUNNING, &data->flags)) { + err = btusb_submit_bulk_urb(hdev, GFP_NOIO); + if (err < 0) { + clear_bit(BTUSB_BULK_RUNNING, &data->flags); + goto failed; + } + + btusb_submit_bulk_urb(hdev, GFP_NOIO); + } + + if (test_bit(BTUSB_ISOC_RUNNING, &data->flags)) { + if (btusb_submit_isoc_urb(hdev, GFP_NOIO) < 0) + clear_bit(BTUSB_ISOC_RUNNING, &data->flags); + else + btusb_submit_isoc_urb(hdev, GFP_NOIO); + } + + spin_lock_irq(&data->txlock); + play_deferred(data); + clear_bit(BTUSB_SUSPENDING, &data->flags); + spin_unlock_irq(&data->txlock); + schedule_work(&data->work); + + return 0; + +failed: + usb_scuttle_anchored_urbs(&data->deferred); +done: + spin_lock_irq(&data->txlock); + clear_bit(BTUSB_SUSPENDING, &data->flags); + spin_unlock_irq(&data->txlock); + + return err; +} +#endif + +static struct usb_driver btusb_driver = { + .name = "btusb", + .probe = btusb_probe, + .disconnect = btusb_disconnect, +#ifdef CONFIG_PM + .suspend = btusb_suspend, + .resume = btusb_resume, +#endif + .id_table = btusb_table, + .supports_autosuspend = 1, + .disable_hub_initiated_lpm = 1, +}; + +module_usb_driver(btusb_driver); + +module_param(disable_scofix, bool, 0644); +MODULE_PARM_DESC(disable_scofix, "Disable fixup of wrong SCO buffer size"); + +module_param(force_scofix, bool, 0644); +MODULE_PARM_DESC(force_scofix, "Force fixup of wrong SCO buffers size"); + +module_param(enable_autosuspend, bool, 0644); +MODULE_PARM_DESC(enable_autosuspend, "Enable USB autosuspend by default"); + +module_param(reset, bool, 0644); +MODULE_PARM_DESC(reset, "Send HCI reset command on initialization"); + +MODULE_AUTHOR("Marcel Holtmann "); +MODULE_DESCRIPTION("Generic Bluetooth USB driver ver " VERSION); +MODULE_VERSION(VERSION); +MODULE_LICENSE("GPL"); -- cgit v1.2.3