From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/hwmon/lm92.c | 343 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 343 insertions(+) create mode 100644 drivers/hwmon/lm92.c (limited to 'drivers/hwmon/lm92.c') diff --git a/drivers/hwmon/lm92.c b/drivers/hwmon/lm92.c new file mode 100644 index 000000000..2ff3044a6 --- /dev/null +++ b/drivers/hwmon/lm92.c @@ -0,0 +1,343 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * lm92 - Hardware monitoring driver + * Copyright (C) 2005-2008 Jean Delvare + * + * Based on the lm90 driver, with some ideas taken from the lm_sensors + * lm92 driver as well. + * + * The LM92 is a sensor chip made by National Semiconductor. It reports + * its own temperature with a 0.0625 deg resolution and a 0.33 deg + * accuracy. Complete datasheet can be obtained from National's website + * at: + * http://www.national.com/pf/LM/LM92.html + * + * This driver also supports the MAX6635 sensor chip made by Maxim. + * This chip is compatible with the LM92, but has a lesser accuracy + * (1.0 deg). Complete datasheet can be obtained from Maxim's website + * at: + * http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3074 + * + * Since the LM92 was the first chipset supported by this driver, most + * comments will refer to this chipset, but are actually general and + * concern all supported chipsets, unless mentioned otherwise. + * + * Support could easily be added for the National Semiconductor LM76 + * and Maxim MAX6633 and MAX6634 chips, which are mostly compatible + * with the LM92. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * The LM92 and MAX6635 have 2 two-state pins for address selection, + * resulting in 4 possible addresses. + */ +static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, + I2C_CLIENT_END }; +enum chips { lm92, max6635 }; + +/* The LM92 registers */ +#define LM92_REG_CONFIG 0x01 /* 8-bit, RW */ +#define LM92_REG_TEMP 0x00 /* 16-bit, RO */ +#define LM92_REG_TEMP_HYST 0x02 /* 16-bit, RW */ +#define LM92_REG_TEMP_CRIT 0x03 /* 16-bit, RW */ +#define LM92_REG_TEMP_LOW 0x04 /* 16-bit, RW */ +#define LM92_REG_TEMP_HIGH 0x05 /* 16-bit, RW */ +#define LM92_REG_MAN_ID 0x07 /* 16-bit, RO, LM92 only */ + +/* + * The LM92 uses signed 13-bit values with LSB = 0.0625 degree Celsius, + * left-justified in 16-bit registers. No rounding is done, with such + * a resolution it's just not worth it. Note that the MAX6635 doesn't + * make use of the 4 lower bits for limits (i.e. effective resolution + * for limits is 1 degree Celsius). + */ +static inline int TEMP_FROM_REG(s16 reg) +{ + return reg / 8 * 625 / 10; +} + +static inline s16 TEMP_TO_REG(long val) +{ + val = clamp_val(val, -60000, 160000); + return val * 10 / 625 * 8; +} + +/* Alarm flags are stored in the 3 LSB of the temperature register */ +static inline u8 ALARMS_FROM_REG(s16 reg) +{ + return reg & 0x0007; +} + +enum temp_index { + t_input, + t_crit, + t_min, + t_max, + t_hyst, + t_num_regs +}; + +static const u8 regs[t_num_regs] = { + [t_input] = LM92_REG_TEMP, + [t_crit] = LM92_REG_TEMP_CRIT, + [t_min] = LM92_REG_TEMP_LOW, + [t_max] = LM92_REG_TEMP_HIGH, + [t_hyst] = LM92_REG_TEMP_HYST, +}; + +/* Client data (each client gets its own) */ +struct lm92_data { + struct i2c_client *client; + struct mutex update_lock; + bool valid; /* false until following fields are valid */ + unsigned long last_updated; /* in jiffies */ + + /* registers values */ + s16 temp[t_num_regs]; /* index with enum temp_index */ +}; + +/* + * Sysfs attributes and callback functions + */ + +static struct lm92_data *lm92_update_device(struct device *dev) +{ + struct lm92_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int i; + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ) || + !data->valid) { + dev_dbg(&client->dev, "Updating lm92 data\n"); + for (i = 0; i < t_num_regs; i++) { + data->temp[i] = + i2c_smbus_read_word_swapped(client, regs[i]); + } + data->last_updated = jiffies; + data->valid = true; + } + + mutex_unlock(&data->update_lock); + + return data; +} + +static ssize_t temp_show(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct lm92_data *data = lm92_update_device(dev); + + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index])); +} + +static ssize_t temp_store(struct device *dev, + struct device_attribute *devattr, const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct lm92_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int nr = attr->index; + long val; + int err; + + err = kstrtol(buf, 10, &val); + if (err) + return err; + + mutex_lock(&data->update_lock); + data->temp[nr] = TEMP_TO_REG(val); + i2c_smbus_write_word_swapped(client, regs[nr], data->temp[nr]); + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t temp_hyst_show(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct lm92_data *data = lm92_update_device(dev); + + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index]) + - TEMP_FROM_REG(data->temp[t_hyst])); +} + +static ssize_t temp1_min_hyst_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct lm92_data *data = lm92_update_device(dev); + + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[t_min]) + + TEMP_FROM_REG(data->temp[t_hyst])); +} + +static ssize_t temp_hyst_store(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct lm92_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + long val; + int err; + + err = kstrtol(buf, 10, &val); + if (err) + return err; + + val = clamp_val(val, -120000, 220000); + mutex_lock(&data->update_lock); + data->temp[t_hyst] = + TEMP_TO_REG(TEMP_FROM_REG(data->temp[attr->index]) - val); + i2c_smbus_write_word_swapped(client, LM92_REG_TEMP_HYST, + data->temp[t_hyst]); + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t alarms_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct lm92_data *data = lm92_update_device(dev); + + return sprintf(buf, "%d\n", ALARMS_FROM_REG(data->temp[t_input])); +} + +static ssize_t alarm_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int bitnr = to_sensor_dev_attr(attr)->index; + struct lm92_data *data = lm92_update_device(dev); + return sprintf(buf, "%d\n", (data->temp[t_input] >> bitnr) & 1); +} + +static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, t_input); +static SENSOR_DEVICE_ATTR_RW(temp1_crit, temp, t_crit); +static SENSOR_DEVICE_ATTR_RW(temp1_crit_hyst, temp_hyst, t_crit); +static SENSOR_DEVICE_ATTR_RW(temp1_min, temp, t_min); +static DEVICE_ATTR_RO(temp1_min_hyst); +static SENSOR_DEVICE_ATTR_RW(temp1_max, temp, t_max); +static SENSOR_DEVICE_ATTR_RO(temp1_max_hyst, temp_hyst, t_max); +static DEVICE_ATTR_RO(alarms); +static SENSOR_DEVICE_ATTR_RO(temp1_crit_alarm, alarm, 2); +static SENSOR_DEVICE_ATTR_RO(temp1_min_alarm, alarm, 0); +static SENSOR_DEVICE_ATTR_RO(temp1_max_alarm, alarm, 1); + +/* + * Detection and registration + */ + +static void lm92_init_client(struct i2c_client *client) +{ + u8 config; + + /* Start the conversions if needed */ + config = i2c_smbus_read_byte_data(client, LM92_REG_CONFIG); + if (config & 0x01) + i2c_smbus_write_byte_data(client, LM92_REG_CONFIG, + config & 0xFE); +} + +static struct attribute *lm92_attrs[] = { + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_crit.dev_attr.attr, + &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr, + &sensor_dev_attr_temp1_min.dev_attr.attr, + &dev_attr_temp1_min_hyst.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, + &dev_attr_alarms.attr, + &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, + NULL +}; +ATTRIBUTE_GROUPS(lm92); + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int lm92_detect(struct i2c_client *new_client, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = new_client->adapter; + u8 config; + u16 man_id; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA + | I2C_FUNC_SMBUS_WORD_DATA)) + return -ENODEV; + + config = i2c_smbus_read_byte_data(new_client, LM92_REG_CONFIG); + man_id = i2c_smbus_read_word_data(new_client, LM92_REG_MAN_ID); + + if ((config & 0xe0) == 0x00 && man_id == 0x0180) + pr_info("lm92: Found National Semiconductor LM92 chip\n"); + else + return -ENODEV; + + strscpy(info->type, "lm92", I2C_NAME_SIZE); + + return 0; +} + +static int lm92_probe(struct i2c_client *new_client) +{ + struct device *hwmon_dev; + struct lm92_data *data; + + data = devm_kzalloc(&new_client->dev, sizeof(struct lm92_data), + GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->client = new_client; + mutex_init(&data->update_lock); + + /* Initialize the chipset */ + lm92_init_client(new_client); + + hwmon_dev = devm_hwmon_device_register_with_groups(&new_client->dev, + new_client->name, + data, lm92_groups); + return PTR_ERR_OR_ZERO(hwmon_dev); +} + +/* + * Module and driver stuff + */ + +static const struct i2c_device_id lm92_id[] = { + { "lm92", lm92 }, + { "max6635", max6635 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, lm92_id); + +static struct i2c_driver lm92_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "lm92", + }, + .probe_new = lm92_probe, + .id_table = lm92_id, + .detect = lm92_detect, + .address_list = normal_i2c, +}; + +module_i2c_driver(lm92_driver); + +MODULE_AUTHOR("Jean Delvare "); +MODULE_DESCRIPTION("LM92/MAX6635 driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3