From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/media/i2c/s5k6a3.c | 393 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 393 insertions(+) create mode 100644 drivers/media/i2c/s5k6a3.c (limited to 'drivers/media/i2c/s5k6a3.c') diff --git a/drivers/media/i2c/s5k6a3.c b/drivers/media/i2c/s5k6a3.c new file mode 100644 index 000000000..a4efd6d10 --- /dev/null +++ b/drivers/media/i2c/s5k6a3.c @@ -0,0 +1,393 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Samsung S5K6A3 image sensor driver + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Sylwester Nawrocki + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define S5K6A3_SENSOR_MAX_WIDTH 1412 +#define S5K6A3_SENSOR_MAX_HEIGHT 1412 +#define S5K6A3_SENSOR_MIN_WIDTH 32 +#define S5K6A3_SENSOR_MIN_HEIGHT 32 + +#define S5K6A3_DEFAULT_WIDTH 1296 +#define S5K6A3_DEFAULT_HEIGHT 732 + +#define S5K6A3_DRV_NAME "S5K6A3" +#define S5K6A3_CLK_NAME "extclk" +#define S5K6A3_DEFAULT_CLK_FREQ 24000000U + +enum { + S5K6A3_SUPP_VDDA, + S5K6A3_SUPP_VDDIO, + S5K6A3_SUPP_AFVDD, + S5K6A3_NUM_SUPPLIES, +}; + +/** + * struct s5k6a3 - fimc-is sensor data structure + * @dev: pointer to this I2C client device structure + * @subdev: the image sensor's v4l2 subdev + * @pad: subdev media source pad + * @supplies: image sensor's voltage regulator supplies + * @gpio_reset: GPIO connected to the sensor's reset pin + * @lock: mutex protecting the structure's members below + * @format: media bus format at the sensor's source pad + * @clock: pointer to &struct clk. + * @clock_frequency: clock frequency + * @power_count: stores state if device is powered + */ +struct s5k6a3 { + struct device *dev; + struct v4l2_subdev subdev; + struct media_pad pad; + struct regulator_bulk_data supplies[S5K6A3_NUM_SUPPLIES]; + int gpio_reset; + struct mutex lock; + struct v4l2_mbus_framefmt format; + struct clk *clock; + u32 clock_frequency; + int power_count; +}; + +static const char * const s5k6a3_supply_names[] = { + [S5K6A3_SUPP_VDDA] = "svdda", + [S5K6A3_SUPP_VDDIO] = "svddio", + [S5K6A3_SUPP_AFVDD] = "afvdd", +}; + +static inline struct s5k6a3 *sd_to_s5k6a3(struct v4l2_subdev *sd) +{ + return container_of(sd, struct s5k6a3, subdev); +} + +static const struct v4l2_mbus_framefmt s5k6a3_formats[] = { + { + .code = MEDIA_BUS_FMT_SGRBG10_1X10, + .colorspace = V4L2_COLORSPACE_SRGB, + .field = V4L2_FIELD_NONE, + } +}; + +static const struct v4l2_mbus_framefmt *find_sensor_format( + struct v4l2_mbus_framefmt *mf) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(s5k6a3_formats); i++) + if (mf->code == s5k6a3_formats[i].code) + return &s5k6a3_formats[i]; + + return &s5k6a3_formats[0]; +} + +static int s5k6a3_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (code->index >= ARRAY_SIZE(s5k6a3_formats)) + return -EINVAL; + + code->code = s5k6a3_formats[code->index].code; + return 0; +} + +static void s5k6a3_try_format(struct v4l2_mbus_framefmt *mf) +{ + const struct v4l2_mbus_framefmt *fmt; + + fmt = find_sensor_format(mf); + mf->code = fmt->code; + mf->field = V4L2_FIELD_NONE; + v4l_bound_align_image(&mf->width, S5K6A3_SENSOR_MIN_WIDTH, + S5K6A3_SENSOR_MAX_WIDTH, 0, + &mf->height, S5K6A3_SENSOR_MIN_HEIGHT, + S5K6A3_SENSOR_MAX_HEIGHT, 0, 0); +} + +static struct v4l2_mbus_framefmt *__s5k6a3_get_format( + struct s5k6a3 *sensor, struct v4l2_subdev_state *sd_state, + u32 pad, enum v4l2_subdev_format_whence which) +{ + if (which == V4L2_SUBDEV_FORMAT_TRY) + return sd_state ? v4l2_subdev_get_try_format(&sensor->subdev, + sd_state, pad) : NULL; + + return &sensor->format; +} + +static int s5k6a3_set_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *fmt) +{ + struct s5k6a3 *sensor = sd_to_s5k6a3(sd); + struct v4l2_mbus_framefmt *mf; + + s5k6a3_try_format(&fmt->format); + + mf = __s5k6a3_get_format(sensor, sd_state, fmt->pad, fmt->which); + if (mf) { + mutex_lock(&sensor->lock); + *mf = fmt->format; + mutex_unlock(&sensor->lock); + } + return 0; +} + +static int s5k6a3_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *fmt) +{ + struct s5k6a3 *sensor = sd_to_s5k6a3(sd); + struct v4l2_mbus_framefmt *mf; + + mf = __s5k6a3_get_format(sensor, sd_state, fmt->pad, fmt->which); + + mutex_lock(&sensor->lock); + fmt->format = *mf; + mutex_unlock(&sensor->lock); + return 0; +} + +static const struct v4l2_subdev_pad_ops s5k6a3_pad_ops = { + .enum_mbus_code = s5k6a3_enum_mbus_code, + .get_fmt = s5k6a3_get_fmt, + .set_fmt = s5k6a3_set_fmt, +}; + +static int s5k6a3_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + struct v4l2_mbus_framefmt *format = v4l2_subdev_get_try_format(sd, + fh->state, + 0); + + *format = s5k6a3_formats[0]; + format->width = S5K6A3_DEFAULT_WIDTH; + format->height = S5K6A3_DEFAULT_HEIGHT; + + return 0; +} + +static const struct v4l2_subdev_internal_ops s5k6a3_sd_internal_ops = { + .open = s5k6a3_open, +}; + +static int __s5k6a3_power_on(struct s5k6a3 *sensor) +{ + int i = S5K6A3_SUPP_VDDA; + int ret; + + ret = clk_set_rate(sensor->clock, sensor->clock_frequency); + if (ret < 0) + return ret; + + ret = pm_runtime_get(sensor->dev); + if (ret < 0) + goto error_rpm_put; + + ret = regulator_enable(sensor->supplies[i].consumer); + if (ret < 0) + goto error_rpm_put; + + ret = clk_prepare_enable(sensor->clock); + if (ret < 0) + goto error_reg_dis; + + for (i++; i < S5K6A3_NUM_SUPPLIES; i++) { + ret = regulator_enable(sensor->supplies[i].consumer); + if (ret < 0) + goto error_clk; + } + + gpio_set_value(sensor->gpio_reset, 1); + usleep_range(600, 800); + gpio_set_value(sensor->gpio_reset, 0); + usleep_range(600, 800); + gpio_set_value(sensor->gpio_reset, 1); + + /* Delay needed for the sensor initialization */ + msleep(20); + return 0; + +error_clk: + clk_disable_unprepare(sensor->clock); +error_reg_dis: + for (--i; i >= 0; --i) + regulator_disable(sensor->supplies[i].consumer); +error_rpm_put: + pm_runtime_put(sensor->dev); + return ret; +} + +static int __s5k6a3_power_off(struct s5k6a3 *sensor) +{ + int i; + + gpio_set_value(sensor->gpio_reset, 0); + + for (i = S5K6A3_NUM_SUPPLIES - 1; i >= 0; i--) + regulator_disable(sensor->supplies[i].consumer); + + clk_disable_unprepare(sensor->clock); + pm_runtime_put(sensor->dev); + return 0; +} + +static int s5k6a3_s_power(struct v4l2_subdev *sd, int on) +{ + struct s5k6a3 *sensor = sd_to_s5k6a3(sd); + int ret = 0; + + mutex_lock(&sensor->lock); + + if (sensor->power_count == !on) { + if (on) + ret = __s5k6a3_power_on(sensor); + else + ret = __s5k6a3_power_off(sensor); + + if (ret == 0) + sensor->power_count += on ? 1 : -1; + } + + mutex_unlock(&sensor->lock); + return ret; +} + +static const struct v4l2_subdev_core_ops s5k6a3_core_ops = { + .s_power = s5k6a3_s_power, +}; + +static const struct v4l2_subdev_ops s5k6a3_subdev_ops = { + .core = &s5k6a3_core_ops, + .pad = &s5k6a3_pad_ops, +}; + +static int s5k6a3_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct s5k6a3 *sensor; + struct v4l2_subdev *sd; + int gpio, i, ret; + + sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL); + if (!sensor) + return -ENOMEM; + + mutex_init(&sensor->lock); + sensor->gpio_reset = -EINVAL; + sensor->clock = ERR_PTR(-EINVAL); + sensor->dev = dev; + + sensor->clock = devm_clk_get(sensor->dev, S5K6A3_CLK_NAME); + if (IS_ERR(sensor->clock)) + return PTR_ERR(sensor->clock); + + gpio = of_get_gpio_flags(dev->of_node, 0, NULL); + if (!gpio_is_valid(gpio)) + return gpio; + + ret = devm_gpio_request_one(dev, gpio, GPIOF_OUT_INIT_LOW, + S5K6A3_DRV_NAME); + if (ret < 0) + return ret; + + sensor->gpio_reset = gpio; + + if (of_property_read_u32(dev->of_node, "clock-frequency", + &sensor->clock_frequency)) { + sensor->clock_frequency = S5K6A3_DEFAULT_CLK_FREQ; + dev_info(dev, "using default %u Hz clock frequency\n", + sensor->clock_frequency); + } + + for (i = 0; i < S5K6A3_NUM_SUPPLIES; i++) + sensor->supplies[i].supply = s5k6a3_supply_names[i]; + + ret = devm_regulator_bulk_get(&client->dev, S5K6A3_NUM_SUPPLIES, + sensor->supplies); + if (ret < 0) + return ret; + + sd = &sensor->subdev; + v4l2_i2c_subdev_init(sd, client, &s5k6a3_subdev_ops); + sensor->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + sd->internal_ops = &s5k6a3_sd_internal_ops; + + sensor->format.code = s5k6a3_formats[0].code; + sensor->format.width = S5K6A3_DEFAULT_WIDTH; + sensor->format.height = S5K6A3_DEFAULT_HEIGHT; + + sd->entity.function = MEDIA_ENT_F_CAM_SENSOR; + sensor->pad.flags = MEDIA_PAD_FL_SOURCE; + ret = media_entity_pads_init(&sd->entity, 1, &sensor->pad); + if (ret < 0) + return ret; + + pm_runtime_no_callbacks(dev); + pm_runtime_enable(dev); + + ret = v4l2_async_register_subdev(sd); + + if (ret < 0) { + pm_runtime_disable(&client->dev); + media_entity_cleanup(&sd->entity); + } + + return ret; +} + +static void s5k6a3_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + pm_runtime_disable(&client->dev); + v4l2_async_unregister_subdev(sd); + media_entity_cleanup(&sd->entity); +} + +static const struct i2c_device_id s5k6a3_ids[] = { + { } +}; +MODULE_DEVICE_TABLE(i2c, s5k6a3_ids); + +#ifdef CONFIG_OF +static const struct of_device_id s5k6a3_of_match[] = { + { .compatible = "samsung,s5k6a3" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, s5k6a3_of_match); +#endif + +static struct i2c_driver s5k6a3_driver = { + .driver = { + .of_match_table = of_match_ptr(s5k6a3_of_match), + .name = S5K6A3_DRV_NAME, + }, + .probe_new = s5k6a3_probe, + .remove = s5k6a3_remove, + .id_table = s5k6a3_ids, +}; + +module_i2c_driver(s5k6a3_driver); + +MODULE_DESCRIPTION("S5K6A3 image sensor subdev driver"); +MODULE_AUTHOR("Sylwester Nawrocki "); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3