From c6fca85f2153de8b2451269de43abcc2aa0213ab Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 4 May 2024 12:10:18 +0200 Subject: Merging upstream version 6.1.82. Signed-off-by: Daniel Baumann --- drivers/mmc/host/sdhci-xenon-phy.c | 48 +++++++++++++++++++++++++++++++------- 1 file changed, 39 insertions(+), 9 deletions(-) (limited to 'drivers/mmc/host/sdhci-xenon-phy.c') diff --git a/drivers/mmc/host/sdhci-xenon-phy.c b/drivers/mmc/host/sdhci-xenon-phy.c index 8cf3a375d..cc9d28b75 100644 --- a/drivers/mmc/host/sdhci-xenon-phy.c +++ b/drivers/mmc/host/sdhci-xenon-phy.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include "sdhci-pltfm.h" @@ -109,6 +110,8 @@ #define XENON_EMMC_PHY_LOGIC_TIMING_ADJUST (XENON_EMMC_PHY_REG_BASE + 0x18) #define XENON_LOGIC_TIMING_VALUE 0x00AA8977 +#define XENON_MAX_PHY_TIMEOUT_LOOPS 100 + /* * List offset of PHY registers and some special register values * in eMMC PHY 5.0 or eMMC PHY 5.1 @@ -216,6 +219,19 @@ static int xenon_alloc_emmc_phy(struct sdhci_host *host) return 0; } +static int xenon_check_stability_internal_clk(struct sdhci_host *host) +{ + u32 reg; + int err; + + err = read_poll_timeout(sdhci_readw, reg, reg & SDHCI_CLOCK_INT_STABLE, + 1100, 20000, false, host, SDHCI_CLOCK_CONTROL); + if (err) + dev_err(mmc_dev(host->mmc), "phy_init: Internal clock never stabilized.\n"); + + return err; +} + /* * eMMC 5.0/5.1 PHY init/re-init. * eMMC PHY init should be executed after: @@ -232,6 +248,11 @@ static int xenon_emmc_phy_init(struct sdhci_host *host) struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs; + int ret = xenon_check_stability_internal_clk(host); + + if (ret) + return ret; + reg = sdhci_readl(host, phy_regs->timing_adj); reg |= XENON_PHY_INITIALIZAION; sdhci_writel(host, reg, phy_regs->timing_adj); @@ -259,18 +280,27 @@ static int xenon_emmc_phy_init(struct sdhci_host *host) /* get the wait time */ wait /= clock; wait++; - /* wait for host eMMC PHY init completes */ - udelay(wait); - reg = sdhci_readl(host, phy_regs->timing_adj); - reg &= XENON_PHY_INITIALIZAION; - if (reg) { + /* + * AC5X spec says bit must be polled until zero. + * We see cases in which timeout can take longer + * than the standard calculation on AC5X, which is + * expected following the spec comment above. + * According to the spec, we must wait as long as + * it takes for that bit to toggle on AC5X. + * Cap that with 100 delay loops so we won't get + * stuck here forever: + */ + + ret = read_poll_timeout(sdhci_readl, reg, + !(reg & XENON_PHY_INITIALIZAION), + wait, XENON_MAX_PHY_TIMEOUT_LOOPS * wait, + false, host, phy_regs->timing_adj); + if (ret) dev_err(mmc_dev(host->mmc), "eMMC PHY init cannot complete after %d us\n", - wait); - return -ETIMEDOUT; - } + wait * XENON_MAX_PHY_TIMEOUT_LOOPS); - return 0; + return ret; } #define ARMADA_3700_SOC_PAD_1_8V 0x1 -- cgit v1.2.3