From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/mmc/host/sdhci.h | 822 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 822 insertions(+) create mode 100644 drivers/mmc/host/sdhci.h (limited to 'drivers/mmc/host/sdhci.h') diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h new file mode 100644 index 000000000..5ce7cdcc1 --- /dev/null +++ b/drivers/mmc/host/sdhci.h @@ -0,0 +1,822 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * linux/drivers/mmc/host/sdhci.h - Secure Digital Host Controller Interface driver + * + * Header file for Host Controller registers and I/O accessors. + * + * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved. + */ +#ifndef __SDHCI_HW_H +#define __SDHCI_HW_H + +#include +#include +#include +#include +#include +#include +#include + +#include + +/* + * Controller registers + */ + +#define SDHCI_DMA_ADDRESS 0x00 +#define SDHCI_ARGUMENT2 SDHCI_DMA_ADDRESS +#define SDHCI_32BIT_BLK_CNT SDHCI_DMA_ADDRESS + +#define SDHCI_BLOCK_SIZE 0x04 +#define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF)) + +#define SDHCI_BLOCK_COUNT 0x06 + +#define SDHCI_ARGUMENT 0x08 + +#define SDHCI_TRANSFER_MODE 0x0C +#define SDHCI_TRNS_DMA 0x01 +#define SDHCI_TRNS_BLK_CNT_EN 0x02 +#define SDHCI_TRNS_AUTO_CMD12 0x04 +#define SDHCI_TRNS_AUTO_CMD23 0x08 +#define SDHCI_TRNS_AUTO_SEL 0x0C +#define SDHCI_TRNS_READ 0x10 +#define SDHCI_TRNS_MULTI 0x20 + +#define SDHCI_COMMAND 0x0E +#define SDHCI_CMD_RESP_MASK 0x03 +#define SDHCI_CMD_CRC 0x08 +#define SDHCI_CMD_INDEX 0x10 +#define SDHCI_CMD_DATA 0x20 +#define SDHCI_CMD_ABORTCMD 0xC0 + +#define SDHCI_CMD_RESP_NONE 0x00 +#define SDHCI_CMD_RESP_LONG 0x01 +#define SDHCI_CMD_RESP_SHORT 0x02 +#define SDHCI_CMD_RESP_SHORT_BUSY 0x03 + +#define SDHCI_MAKE_CMD(c, f) (((c & 0xff) << 8) | (f & 0xff)) +#define SDHCI_GET_CMD(c) ((c>>8) & 0x3f) + +#define SDHCI_RESPONSE 0x10 + +#define SDHCI_BUFFER 0x20 + +#define SDHCI_PRESENT_STATE 0x24 +#define SDHCI_CMD_INHIBIT 0x00000001 +#define SDHCI_DATA_INHIBIT 0x00000002 +#define SDHCI_DOING_WRITE 0x00000100 +#define SDHCI_DOING_READ 0x00000200 +#define SDHCI_SPACE_AVAILABLE 0x00000400 +#define SDHCI_DATA_AVAILABLE 0x00000800 +#define SDHCI_CARD_PRESENT 0x00010000 +#define SDHCI_CARD_PRES_SHIFT 16 +#define SDHCI_CD_STABLE 0x00020000 +#define SDHCI_CD_LVL 0x00040000 +#define SDHCI_CD_LVL_SHIFT 18 +#define SDHCI_WRITE_PROTECT 0x00080000 +#define SDHCI_DATA_LVL_MASK 0x00F00000 +#define SDHCI_DATA_LVL_SHIFT 20 +#define SDHCI_DATA_0_LVL_MASK 0x00100000 +#define SDHCI_CMD_LVL 0x01000000 + +#define SDHCI_HOST_CONTROL 0x28 +#define SDHCI_CTRL_LED 0x01 +#define SDHCI_CTRL_4BITBUS 0x02 +#define SDHCI_CTRL_HISPD 0x04 +#define SDHCI_CTRL_DMA_MASK 0x18 +#define SDHCI_CTRL_SDMA 0x00 +#define SDHCI_CTRL_ADMA1 0x08 +#define SDHCI_CTRL_ADMA32 0x10 +#define SDHCI_CTRL_ADMA64 0x18 +#define SDHCI_CTRL_ADMA3 0x18 +#define SDHCI_CTRL_8BITBUS 0x20 +#define SDHCI_CTRL_CDTEST_INS 0x40 +#define SDHCI_CTRL_CDTEST_EN 0x80 + +#define SDHCI_POWER_CONTROL 0x29 +#define SDHCI_POWER_ON 0x01 +#define SDHCI_POWER_180 0x0A +#define SDHCI_POWER_300 0x0C +#define SDHCI_POWER_330 0x0E + +#define SDHCI_BLOCK_GAP_CONTROL 0x2A + +#define SDHCI_WAKE_UP_CONTROL 0x2B +#define SDHCI_WAKE_ON_INT 0x01 +#define SDHCI_WAKE_ON_INSERT 0x02 +#define SDHCI_WAKE_ON_REMOVE 0x04 + +#define SDHCI_CLOCK_CONTROL 0x2C +#define SDHCI_DIVIDER_SHIFT 8 +#define SDHCI_DIVIDER_HI_SHIFT 6 +#define SDHCI_DIV_MASK 0xFF +#define SDHCI_DIV_MASK_LEN 8 +#define SDHCI_DIV_HI_MASK 0x300 +#define SDHCI_PROG_CLOCK_MODE 0x0020 +#define SDHCI_CLOCK_CARD_EN 0x0004 +#define SDHCI_CLOCK_PLL_EN 0x0008 +#define SDHCI_CLOCK_INT_STABLE 0x0002 +#define SDHCI_CLOCK_INT_EN 0x0001 + +#define SDHCI_TIMEOUT_CONTROL 0x2E + +#define SDHCI_SOFTWARE_RESET 0x2F +#define SDHCI_RESET_ALL 0x01 +#define SDHCI_RESET_CMD 0x02 +#define SDHCI_RESET_DATA 0x04 + +#define SDHCI_INT_STATUS 0x30 +#define SDHCI_INT_ENABLE 0x34 +#define SDHCI_SIGNAL_ENABLE 0x38 +#define SDHCI_INT_RESPONSE 0x00000001 +#define SDHCI_INT_DATA_END 0x00000002 +#define SDHCI_INT_BLK_GAP 0x00000004 +#define SDHCI_INT_DMA_END 0x00000008 +#define SDHCI_INT_SPACE_AVAIL 0x00000010 +#define SDHCI_INT_DATA_AVAIL 0x00000020 +#define SDHCI_INT_CARD_INSERT 0x00000040 +#define SDHCI_INT_CARD_REMOVE 0x00000080 +#define SDHCI_INT_CARD_INT 0x00000100 +#define SDHCI_INT_RETUNE 0x00001000 +#define SDHCI_INT_CQE 0x00004000 +#define SDHCI_INT_ERROR 0x00008000 +#define SDHCI_INT_TIMEOUT 0x00010000 +#define SDHCI_INT_CRC 0x00020000 +#define SDHCI_INT_END_BIT 0x00040000 +#define SDHCI_INT_INDEX 0x00080000 +#define SDHCI_INT_DATA_TIMEOUT 0x00100000 +#define SDHCI_INT_DATA_CRC 0x00200000 +#define SDHCI_INT_DATA_END_BIT 0x00400000 +#define SDHCI_INT_BUS_POWER 0x00800000 +#define SDHCI_INT_AUTO_CMD_ERR 0x01000000 +#define SDHCI_INT_ADMA_ERROR 0x02000000 + +#define SDHCI_INT_NORMAL_MASK 0x00007FFF +#define SDHCI_INT_ERROR_MASK 0xFFFF8000 + +#define SDHCI_INT_CMD_MASK (SDHCI_INT_RESPONSE | SDHCI_INT_TIMEOUT | \ + SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX | \ + SDHCI_INT_AUTO_CMD_ERR) +#define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \ + SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \ + SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \ + SDHCI_INT_DATA_END_BIT | SDHCI_INT_ADMA_ERROR | \ + SDHCI_INT_BLK_GAP) +#define SDHCI_INT_ALL_MASK ((unsigned int)-1) + +#define SDHCI_CQE_INT_ERR_MASK ( \ + SDHCI_INT_ADMA_ERROR | SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT | \ + SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_INDEX | \ + SDHCI_INT_END_BIT | SDHCI_INT_CRC | SDHCI_INT_TIMEOUT) + +#define SDHCI_CQE_INT_MASK (SDHCI_CQE_INT_ERR_MASK | SDHCI_INT_CQE) + +#define SDHCI_AUTO_CMD_STATUS 0x3C +#define SDHCI_AUTO_CMD_TIMEOUT 0x00000002 +#define SDHCI_AUTO_CMD_CRC 0x00000004 +#define SDHCI_AUTO_CMD_END_BIT 0x00000008 +#define SDHCI_AUTO_CMD_INDEX 0x00000010 + +#define SDHCI_HOST_CONTROL2 0x3E +#define SDHCI_CTRL_UHS_MASK 0x0007 +#define SDHCI_CTRL_UHS_SDR12 0x0000 +#define SDHCI_CTRL_UHS_SDR25 0x0001 +#define SDHCI_CTRL_UHS_SDR50 0x0002 +#define SDHCI_CTRL_UHS_SDR104 0x0003 +#define SDHCI_CTRL_UHS_DDR50 0x0004 +#define SDHCI_CTRL_HS400 0x0005 /* Non-standard */ +#define SDHCI_CTRL_VDD_180 0x0008 +#define SDHCI_CTRL_DRV_TYPE_MASK 0x0030 +#define SDHCI_CTRL_DRV_TYPE_B 0x0000 +#define SDHCI_CTRL_DRV_TYPE_A 0x0010 +#define SDHCI_CTRL_DRV_TYPE_C 0x0020 +#define SDHCI_CTRL_DRV_TYPE_D 0x0030 +#define SDHCI_CTRL_EXEC_TUNING 0x0040 +#define SDHCI_CTRL_TUNED_CLK 0x0080 +#define SDHCI_CMD23_ENABLE 0x0800 +#define SDHCI_CTRL_V4_MODE 0x1000 +#define SDHCI_CTRL_64BIT_ADDR 0x2000 +#define SDHCI_CTRL_PRESET_VAL_ENABLE 0x8000 + +#define SDHCI_CAPABILITIES 0x40 +#define SDHCI_TIMEOUT_CLK_MASK GENMASK(5, 0) +#define SDHCI_TIMEOUT_CLK_SHIFT 0 +#define SDHCI_TIMEOUT_CLK_UNIT 0x00000080 +#define SDHCI_CLOCK_BASE_MASK GENMASK(13, 8) +#define SDHCI_CLOCK_BASE_SHIFT 8 +#define SDHCI_CLOCK_V3_BASE_MASK GENMASK(15, 8) +#define SDHCI_MAX_BLOCK_MASK 0x00030000 +#define SDHCI_MAX_BLOCK_SHIFT 16 +#define SDHCI_CAN_DO_8BIT 0x00040000 +#define SDHCI_CAN_DO_ADMA2 0x00080000 +#define SDHCI_CAN_DO_ADMA1 0x00100000 +#define SDHCI_CAN_DO_HISPD 0x00200000 +#define SDHCI_CAN_DO_SDMA 0x00400000 +#define SDHCI_CAN_DO_SUSPEND 0x00800000 +#define SDHCI_CAN_VDD_330 0x01000000 +#define SDHCI_CAN_VDD_300 0x02000000 +#define SDHCI_CAN_VDD_180 0x04000000 +#define SDHCI_CAN_64BIT_V4 0x08000000 +#define SDHCI_CAN_64BIT 0x10000000 + +#define SDHCI_CAPABILITIES_1 0x44 +#define SDHCI_SUPPORT_SDR50 0x00000001 +#define SDHCI_SUPPORT_SDR104 0x00000002 +#define SDHCI_SUPPORT_DDR50 0x00000004 +#define SDHCI_DRIVER_TYPE_A 0x00000010 +#define SDHCI_DRIVER_TYPE_C 0x00000020 +#define SDHCI_DRIVER_TYPE_D 0x00000040 +#define SDHCI_RETUNING_TIMER_COUNT_MASK GENMASK(11, 8) +#define SDHCI_USE_SDR50_TUNING 0x00002000 +#define SDHCI_RETUNING_MODE_MASK GENMASK(15, 14) +#define SDHCI_CLOCK_MUL_MASK GENMASK(23, 16) +#define SDHCI_CAN_DO_ADMA3 0x08000000 +#define SDHCI_SUPPORT_HS400 0x80000000 /* Non-standard */ + +#define SDHCI_MAX_CURRENT 0x48 +#define SDHCI_MAX_CURRENT_LIMIT GENMASK(7, 0) +#define SDHCI_MAX_CURRENT_330_MASK GENMASK(7, 0) +#define SDHCI_MAX_CURRENT_300_MASK GENMASK(15, 8) +#define SDHCI_MAX_CURRENT_180_MASK GENMASK(23, 16) +#define SDHCI_MAX_CURRENT_MULTIPLIER 4 + +/* 4C-4F reserved for more max current */ + +#define SDHCI_SET_ACMD12_ERROR 0x50 +#define SDHCI_SET_INT_ERROR 0x52 + +#define SDHCI_ADMA_ERROR 0x54 + +/* 55-57 reserved */ + +#define SDHCI_ADMA_ADDRESS 0x58 +#define SDHCI_ADMA_ADDRESS_HI 0x5C + +/* 60-FB reserved */ + +#define SDHCI_PRESET_FOR_HIGH_SPEED 0x64 +#define SDHCI_PRESET_FOR_SDR12 0x66 +#define SDHCI_PRESET_FOR_SDR25 0x68 +#define SDHCI_PRESET_FOR_SDR50 0x6A +#define SDHCI_PRESET_FOR_SDR104 0x6C +#define SDHCI_PRESET_FOR_DDR50 0x6E +#define SDHCI_PRESET_FOR_HS400 0x74 /* Non-standard */ +#define SDHCI_PRESET_DRV_MASK GENMASK(15, 14) +#define SDHCI_PRESET_CLKGEN_SEL BIT(10) +#define SDHCI_PRESET_SDCLK_FREQ_MASK GENMASK(9, 0) + +#define SDHCI_SLOT_INT_STATUS 0xFC + +#define SDHCI_HOST_VERSION 0xFE +#define SDHCI_VENDOR_VER_MASK 0xFF00 +#define SDHCI_VENDOR_VER_SHIFT 8 +#define SDHCI_SPEC_VER_MASK 0x00FF +#define SDHCI_SPEC_VER_SHIFT 0 +#define SDHCI_SPEC_100 0 +#define SDHCI_SPEC_200 1 +#define SDHCI_SPEC_300 2 +#define SDHCI_SPEC_400 3 +#define SDHCI_SPEC_410 4 +#define SDHCI_SPEC_420 5 + +/* + * End of controller registers. + */ + +#define SDHCI_MAX_DIV_SPEC_200 256 +#define SDHCI_MAX_DIV_SPEC_300 2046 + +/* + * Host SDMA buffer boundary. Valid values from 4K to 512K in powers of 2. + */ +#define SDHCI_DEFAULT_BOUNDARY_SIZE (512 * 1024) +#define SDHCI_DEFAULT_BOUNDARY_ARG (ilog2(SDHCI_DEFAULT_BOUNDARY_SIZE) - 12) + +/* ADMA2 32-bit DMA descriptor size */ +#define SDHCI_ADMA2_32_DESC_SZ 8 + +/* ADMA2 32-bit descriptor */ +struct sdhci_adma2_32_desc { + __le16 cmd; + __le16 len; + __le32 addr; +} __packed __aligned(4); + +/* ADMA2 data alignment */ +#define SDHCI_ADMA2_ALIGN 4 +#define SDHCI_ADMA2_MASK (SDHCI_ADMA2_ALIGN - 1) + +/* + * ADMA2 descriptor alignment. Some controllers (e.g. Intel) require 8 byte + * alignment for the descriptor table even in 32-bit DMA mode. Memory + * allocation is at least 8 byte aligned anyway, so just stipulate 8 always. + */ +#define SDHCI_ADMA2_DESC_ALIGN 8 + +/* + * ADMA2 64-bit DMA descriptor size + * According to SD Host Controller spec v4.10, there are two kinds of + * descriptors for 64-bit addressing mode: 96-bit Descriptor and 128-bit + * Descriptor, if Host Version 4 Enable is set in the Host Control 2 + * register, 128-bit Descriptor will be selected. + */ +#define SDHCI_ADMA2_64_DESC_SZ(host) ((host)->v4_mode ? 16 : 12) + +/* + * ADMA2 64-bit descriptor. Note 12-byte descriptor can't always be 8-byte + * aligned. + */ +struct sdhci_adma2_64_desc { + __le16 cmd; + __le16 len; + __le32 addr_lo; + __le32 addr_hi; +} __packed __aligned(4); + +#define ADMA2_TRAN_VALID 0x21 +#define ADMA2_NOP_END_VALID 0x3 +#define ADMA2_END 0x2 + +/* + * Maximum segments assuming a 512KiB maximum requisition size and a minimum + * 4KiB page size. Note this also allows enough for multiple descriptors in + * case of PAGE_SIZE >= 64KiB. + */ +#define SDHCI_MAX_SEGS 128 + +/* Allow for a a command request and a data request at the same time */ +#define SDHCI_MAX_MRQS 2 + +/* + * 48bit command and 136 bit response in 100KHz clock could take upto 2.48ms. + * However since the start time of the command, the time between + * command and response, and the time between response and start of data is + * not known, set the command transfer time to 10ms. + */ +#define MMC_CMD_TRANSFER_TIME (10 * NSEC_PER_MSEC) /* max 10 ms */ + +#define sdhci_err_stats_inc(host, err_name) \ + mmc_debugfs_err_stats_inc((host)->mmc, MMC_ERR_##err_name) + +enum sdhci_cookie { + COOKIE_UNMAPPED, + COOKIE_PRE_MAPPED, /* mapped by sdhci_pre_req() */ + COOKIE_MAPPED, /* mapped by sdhci_prepare_data() */ +}; + +struct sdhci_host { + /* Data set by hardware interface driver */ + const char *hw_name; /* Hardware bus name */ + + unsigned int quirks; /* Deviations from spec. */ + +/* Controller doesn't honor resets unless we touch the clock register */ +#define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0) +/* Controller has bad caps bits, but really supports DMA */ +#define SDHCI_QUIRK_FORCE_DMA (1<<1) +/* Controller doesn't like to be reset when there is no card inserted. */ +#define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2) +/* Controller doesn't like clearing the power reg before a change */ +#define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3) +/* Controller has an unusable DMA engine */ +#define SDHCI_QUIRK_BROKEN_DMA (1<<5) +/* Controller has an unusable ADMA engine */ +#define SDHCI_QUIRK_BROKEN_ADMA (1<<6) +/* Controller can only DMA from 32-bit aligned addresses */ +#define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<7) +/* Controller can only DMA chunk sizes that are a multiple of 32 bits */ +#define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<8) +/* Controller can only ADMA chunks that are a multiple of 32 bits */ +#define SDHCI_QUIRK_32BIT_ADMA_SIZE (1<<9) +/* Controller needs to be reset after each request to stay stable */ +#define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<10) +/* Controller needs voltage and power writes to happen separately */ +#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<11) +/* Controller provides an incorrect timeout value for transfers */ +#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12) +/* Controller has an issue with buffer bits for small transfers */ +#define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13) +/* Controller does not provide transfer-complete interrupt when not busy */ +#define SDHCI_QUIRK_NO_BUSY_IRQ (1<<14) +/* Controller has unreliable card detection */ +#define SDHCI_QUIRK_BROKEN_CARD_DETECTION (1<<15) +/* Controller reports inverted write-protect state */ +#define SDHCI_QUIRK_INVERTED_WRITE_PROTECT (1<<16) +/* Controller has unusable command queue engine */ +#define SDHCI_QUIRK_BROKEN_CQE (1<<17) +/* Controller does not like fast PIO transfers */ +#define SDHCI_QUIRK_PIO_NEEDS_DELAY (1<<18) +/* Controller does not have a LED */ +#define SDHCI_QUIRK_NO_LED (1<<19) +/* Controller has to be forced to use block size of 2048 bytes */ +#define SDHCI_QUIRK_FORCE_BLK_SZ_2048 (1<<20) +/* Controller cannot do multi-block transfers */ +#define SDHCI_QUIRK_NO_MULTIBLOCK (1<<21) +/* Controller can only handle 1-bit data transfers */ +#define SDHCI_QUIRK_FORCE_1_BIT_DATA (1<<22) +/* Controller needs 10ms delay between applying power and clock */ +#define SDHCI_QUIRK_DELAY_AFTER_POWER (1<<23) +/* Controller uses SDCLK instead of TMCLK for data timeouts */ +#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK (1<<24) +/* Controller reports wrong base clock capability */ +#define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN (1<<25) +/* Controller cannot support End Attribute in NOP ADMA descriptor */ +#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC (1<<26) +/* Controller is missing device caps. Use caps provided by host */ +#define SDHCI_QUIRK_MISSING_CAPS (1<<27) +/* Controller uses Auto CMD12 command to stop the transfer */ +#define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 (1<<28) +/* Controller doesn't have HISPD bit field in HI-SPEED SD card */ +#define SDHCI_QUIRK_NO_HISPD_BIT (1<<29) +/* Controller treats ADMA descriptors with length 0000h incorrectly */ +#define SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC (1<<30) +/* The read-only detection via SDHCI_PRESENT_STATE register is unstable */ +#define SDHCI_QUIRK_UNSTABLE_RO_DETECT (1<<31) + + unsigned int quirks2; /* More deviations from spec. */ + +#define SDHCI_QUIRK2_HOST_OFF_CARD_ON (1<<0) +#define SDHCI_QUIRK2_HOST_NO_CMD23 (1<<1) +/* The system physically doesn't support 1.8v, even if the host does */ +#define SDHCI_QUIRK2_NO_1_8_V (1<<2) +#define SDHCI_QUIRK2_PRESET_VALUE_BROKEN (1<<3) +#define SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON (1<<4) +/* Controller has a non-standard host control register */ +#define SDHCI_QUIRK2_BROKEN_HOST_CONTROL (1<<5) +/* Controller does not support HS200 */ +#define SDHCI_QUIRK2_BROKEN_HS200 (1<<6) +/* Controller does not support DDR50 */ +#define SDHCI_QUIRK2_BROKEN_DDR50 (1<<7) +/* Stop command (CMD12) can set Transfer Complete when not using MMC_RSP_BUSY */ +#define SDHCI_QUIRK2_STOP_WITH_TC (1<<8) +/* Controller does not support 64-bit DMA */ +#define SDHCI_QUIRK2_BROKEN_64_BIT_DMA (1<<9) +/* need clear transfer mode register before send cmd */ +#define SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD (1<<10) +/* Capability register bit-63 indicates HS400 support */ +#define SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400 (1<<11) +/* forced tuned clock */ +#define SDHCI_QUIRK2_TUNING_WORK_AROUND (1<<12) +/* disable the block count for single block transactions */ +#define SDHCI_QUIRK2_SUPPORT_SINGLE (1<<13) +/* Controller broken with using ACMD23 */ +#define SDHCI_QUIRK2_ACMD23_BROKEN (1<<14) +/* Broken Clock divider zero in controller */ +#define SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN (1<<15) +/* Controller has CRC in 136 bit Command Response */ +#define SDHCI_QUIRK2_RSP_136_HAS_CRC (1<<16) +/* + * Disable HW timeout if the requested timeout is more than the maximum + * obtainable timeout. + */ +#define SDHCI_QUIRK2_DISABLE_HW_TIMEOUT (1<<17) +/* + * 32-bit block count may not support eMMC where upper bits of CMD23 are used + * for other purposes. Consequently we support 16-bit block count by default. + * Otherwise, SDHCI_QUIRK2_USE_32BIT_BLK_CNT can be selected to use 32-bit + * block count. + */ +#define SDHCI_QUIRK2_USE_32BIT_BLK_CNT (1<<18) +/* Issue CMD and DATA reset together */ +#define SDHCI_QUIRK2_ISSUE_CMD_DAT_RESET_TOGETHER (1<<19) + + int irq; /* Device IRQ */ + void __iomem *ioaddr; /* Mapped address */ + phys_addr_t mapbase; /* physical address base */ + char *bounce_buffer; /* For packing SDMA reads/writes */ + dma_addr_t bounce_addr; + unsigned int bounce_buffer_size; + + const struct sdhci_ops *ops; /* Low level hw interface */ + + /* Internal data */ + struct mmc_host *mmc; /* MMC structure */ + struct mmc_host_ops mmc_host_ops; /* MMC host ops */ + u64 dma_mask; /* custom DMA mask */ + +#if IS_ENABLED(CONFIG_LEDS_CLASS) + struct led_classdev led; /* LED control */ + char led_name[32]; +#endif + + spinlock_t lock; /* Mutex */ + + int flags; /* Host attributes */ +#define SDHCI_USE_SDMA (1<<0) /* Host is SDMA capable */ +#define SDHCI_USE_ADMA (1<<1) /* Host is ADMA capable */ +#define SDHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */ +#define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */ +#define SDHCI_SDR50_NEEDS_TUNING (1<<4) /* SDR50 needs tuning */ +#define SDHCI_AUTO_CMD12 (1<<6) /* Auto CMD12 support */ +#define SDHCI_AUTO_CMD23 (1<<7) /* Auto CMD23 support */ +#define SDHCI_PV_ENABLED (1<<8) /* Preset value enabled */ +#define SDHCI_USE_64_BIT_DMA (1<<12) /* Use 64-bit DMA */ +#define SDHCI_HS400_TUNING (1<<13) /* Tuning for HS400 */ +#define SDHCI_SIGNALING_330 (1<<14) /* Host is capable of 3.3V signaling */ +#define SDHCI_SIGNALING_180 (1<<15) /* Host is capable of 1.8V signaling */ +#define SDHCI_SIGNALING_120 (1<<16) /* Host is capable of 1.2V signaling */ + + unsigned int version; /* SDHCI spec. version */ + + unsigned int max_clk; /* Max possible freq (MHz) */ + unsigned int timeout_clk; /* Timeout freq (KHz) */ + u8 max_timeout_count; /* Vendor specific max timeout count */ + unsigned int clk_mul; /* Clock Muliplier value */ + + unsigned int clock; /* Current clock (MHz) */ + u8 pwr; /* Current voltage */ + u8 drv_type; /* Current UHS-I driver type */ + bool reinit_uhs; /* Force UHS-related re-initialization */ + + bool runtime_suspended; /* Host is runtime suspended */ + bool bus_on; /* Bus power prevents runtime suspend */ + bool preset_enabled; /* Preset is enabled */ + bool pending_reset; /* Cmd/data reset is pending */ + bool irq_wake_enabled; /* IRQ wakeup is enabled */ + bool v4_mode; /* Host Version 4 Enable */ + bool use_external_dma; /* Host selects to use external DMA */ + bool always_defer_done; /* Always defer to complete requests */ + + struct mmc_request *mrqs_done[SDHCI_MAX_MRQS]; /* Requests done */ + struct mmc_command *cmd; /* Current command */ + struct mmc_command *data_cmd; /* Current data command */ + struct mmc_command *deferred_cmd; /* Deferred command */ + struct mmc_data *data; /* Current data request */ + unsigned int data_early:1; /* Data finished before cmd */ + + struct sg_mapping_iter sg_miter; /* SG state for PIO */ + unsigned int blocks; /* remaining PIO blocks */ + + int sg_count; /* Mapped sg entries */ + int max_adma; /* Max. length in ADMA descriptor */ + + void *adma_table; /* ADMA descriptor table */ + void *align_buffer; /* Bounce buffer */ + + size_t adma_table_sz; /* ADMA descriptor table size */ + size_t align_buffer_sz; /* Bounce buffer size */ + + dma_addr_t adma_addr; /* Mapped ADMA descr. table */ + dma_addr_t align_addr; /* Mapped bounce buffer */ + + unsigned int desc_sz; /* ADMA current descriptor size */ + unsigned int alloc_desc_sz; /* ADMA descr. max size host supports */ + + struct workqueue_struct *complete_wq; /* Request completion wq */ + struct work_struct complete_work; /* Request completion work */ + + struct timer_list timer; /* Timer for timeouts */ + struct timer_list data_timer; /* Timer for data timeouts */ + +#if IS_ENABLED(CONFIG_MMC_SDHCI_EXTERNAL_DMA) + struct dma_chan *rx_chan; + struct dma_chan *tx_chan; +#endif + + u32 caps; /* CAPABILITY_0 */ + u32 caps1; /* CAPABILITY_1 */ + bool read_caps; /* Capability flags have been read */ + + bool sdhci_core_to_disable_vqmmc; /* sdhci core can disable vqmmc */ + unsigned int ocr_avail_sdio; /* OCR bit masks */ + unsigned int ocr_avail_sd; + unsigned int ocr_avail_mmc; + u32 ocr_mask; /* available voltages */ + + unsigned timing; /* Current timing */ + + u32 thread_isr; + + /* cached registers */ + u32 ier; + + bool cqe_on; /* CQE is operating */ + u32 cqe_ier; /* CQE interrupt mask */ + u32 cqe_err_ier; /* CQE error interrupt mask */ + + wait_queue_head_t buf_ready_int; /* Waitqueue for Buffer Read Ready interrupt */ + unsigned int tuning_done; /* Condition flag set when CMD19 succeeds */ + + unsigned int tuning_count; /* Timer count for re-tuning */ + unsigned int tuning_mode; /* Re-tuning mode supported by host */ + unsigned int tuning_err; /* Error code for re-tuning */ +#define SDHCI_TUNING_MODE_1 0 +#define SDHCI_TUNING_MODE_2 1 +#define SDHCI_TUNING_MODE_3 2 + /* Delay (ms) between tuning commands */ + int tuning_delay; + int tuning_loop_count; + + /* Host SDMA buffer boundary. */ + u32 sdma_boundary; + + /* Host ADMA table count */ + u32 adma_table_cnt; + + u64 data_timeout; + + unsigned long private[] ____cacheline_aligned; +}; + +struct sdhci_ops { +#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS + u32 (*read_l)(struct sdhci_host *host, int reg); + u16 (*read_w)(struct sdhci_host *host, int reg); + u8 (*read_b)(struct sdhci_host *host, int reg); + void (*write_l)(struct sdhci_host *host, u32 val, int reg); + void (*write_w)(struct sdhci_host *host, u16 val, int reg); + void (*write_b)(struct sdhci_host *host, u8 val, int reg); +#endif + + void (*set_clock)(struct sdhci_host *host, unsigned int clock); + void (*set_power)(struct sdhci_host *host, unsigned char mode, + unsigned short vdd); + + u32 (*irq)(struct sdhci_host *host, u32 intmask); + + int (*set_dma_mask)(struct sdhci_host *host); + int (*enable_dma)(struct sdhci_host *host); + unsigned int (*get_max_clock)(struct sdhci_host *host); + unsigned int (*get_min_clock)(struct sdhci_host *host); + /* get_timeout_clock should return clk rate in unit of Hz */ + unsigned int (*get_timeout_clock)(struct sdhci_host *host); + unsigned int (*get_max_timeout_count)(struct sdhci_host *host); + void (*set_timeout)(struct sdhci_host *host, + struct mmc_command *cmd); + void (*set_bus_width)(struct sdhci_host *host, int width); + void (*platform_send_init_74_clocks)(struct sdhci_host *host, + u8 power_mode); + unsigned int (*get_ro)(struct sdhci_host *host); + void (*reset)(struct sdhci_host *host, u8 mask); + int (*platform_execute_tuning)(struct sdhci_host *host, u32 opcode); + void (*set_uhs_signaling)(struct sdhci_host *host, unsigned int uhs); + void (*hw_reset)(struct sdhci_host *host); + void (*adma_workaround)(struct sdhci_host *host, u32 intmask); + void (*card_event)(struct sdhci_host *host); + void (*voltage_switch)(struct sdhci_host *host); + void (*adma_write_desc)(struct sdhci_host *host, void **desc, + dma_addr_t addr, int len, unsigned int cmd); + void (*copy_to_bounce_buffer)(struct sdhci_host *host, + struct mmc_data *data, + unsigned int length); + void (*request_done)(struct sdhci_host *host, + struct mmc_request *mrq); + void (*dump_vendor_regs)(struct sdhci_host *host); +}; + +#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS + +static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg) +{ + if (unlikely(host->ops->write_l)) + host->ops->write_l(host, val, reg); + else + writel(val, host->ioaddr + reg); +} + +static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg) +{ + if (unlikely(host->ops->write_w)) + host->ops->write_w(host, val, reg); + else + writew(val, host->ioaddr + reg); +} + +static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg) +{ + if (unlikely(host->ops->write_b)) + host->ops->write_b(host, val, reg); + else + writeb(val, host->ioaddr + reg); +} + +static inline u32 sdhci_readl(struct sdhci_host *host, int reg) +{ + if (unlikely(host->ops->read_l)) + return host->ops->read_l(host, reg); + else + return readl(host->ioaddr + reg); +} + +static inline u16 sdhci_readw(struct sdhci_host *host, int reg) +{ + if (unlikely(host->ops->read_w)) + return host->ops->read_w(host, reg); + else + return readw(host->ioaddr + reg); +} + +static inline u8 sdhci_readb(struct sdhci_host *host, int reg) +{ + if (unlikely(host->ops->read_b)) + return host->ops->read_b(host, reg); + else + return readb(host->ioaddr + reg); +} + +#else + +static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg) +{ + writel(val, host->ioaddr + reg); +} + +static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg) +{ + writew(val, host->ioaddr + reg); +} + +static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg) +{ + writeb(val, host->ioaddr + reg); +} + +static inline u32 sdhci_readl(struct sdhci_host *host, int reg) +{ + return readl(host->ioaddr + reg); +} + +static inline u16 sdhci_readw(struct sdhci_host *host, int reg) +{ + return readw(host->ioaddr + reg); +} + +static inline u8 sdhci_readb(struct sdhci_host *host, int reg) +{ + return readb(host->ioaddr + reg); +} + +#endif /* CONFIG_MMC_SDHCI_IO_ACCESSORS */ + +struct sdhci_host *sdhci_alloc_host(struct device *dev, size_t priv_size); +void sdhci_free_host(struct sdhci_host *host); + +static inline void *sdhci_priv(struct sdhci_host *host) +{ + return host->private; +} + +void __sdhci_read_caps(struct sdhci_host *host, const u16 *ver, + const u32 *caps, const u32 *caps1); +int sdhci_setup_host(struct sdhci_host *host); +void sdhci_cleanup_host(struct sdhci_host *host); +int __sdhci_add_host(struct sdhci_host *host); +int sdhci_add_host(struct sdhci_host *host); +void sdhci_remove_host(struct sdhci_host *host, int dead); + +static inline void sdhci_read_caps(struct sdhci_host *host) +{ + __sdhci_read_caps(host, NULL, NULL, NULL); +} + +u16 sdhci_calc_clk(struct sdhci_host *host, unsigned int clock, + unsigned int *actual_clock); +void sdhci_set_clock(struct sdhci_host *host, unsigned int clock); +void sdhci_enable_clk(struct sdhci_host *host, u16 clk); +void sdhci_set_power(struct sdhci_host *host, unsigned char mode, + unsigned short vdd); +void sdhci_set_power_and_bus_voltage(struct sdhci_host *host, + unsigned char mode, + unsigned short vdd); +void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode, + unsigned short vdd); +int sdhci_get_cd_nogpio(struct mmc_host *mmc); +void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq); +int sdhci_request_atomic(struct mmc_host *mmc, struct mmc_request *mrq); +void sdhci_set_bus_width(struct sdhci_host *host, int width); +void sdhci_reset(struct sdhci_host *host, u8 mask); +void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing); +int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode); +void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios); +int sdhci_start_signal_voltage_switch(struct mmc_host *mmc, + struct mmc_ios *ios); +void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable); +void sdhci_adma_write_desc(struct sdhci_host *host, void **desc, + dma_addr_t addr, int len, unsigned int cmd); + +#ifdef CONFIG_PM +int sdhci_suspend_host(struct sdhci_host *host); +int sdhci_resume_host(struct sdhci_host *host); +int sdhci_runtime_suspend_host(struct sdhci_host *host); +int sdhci_runtime_resume_host(struct sdhci_host *host, int soft_reset); +#endif + +void sdhci_cqe_enable(struct mmc_host *mmc); +void sdhci_cqe_disable(struct mmc_host *mmc, bool recovery); +bool sdhci_cqe_irq(struct sdhci_host *host, u32 intmask, int *cmd_error, + int *data_error); + +void sdhci_dumpregs(struct sdhci_host *host); +void sdhci_enable_v4_mode(struct sdhci_host *host); + +void sdhci_start_tuning(struct sdhci_host *host); +void sdhci_end_tuning(struct sdhci_host *host); +void sdhci_reset_tuning(struct sdhci_host *host); +void sdhci_send_tuning(struct sdhci_host *host, u32 opcode); +void sdhci_abort_tuning(struct sdhci_host *host, u32 opcode); +void sdhci_switch_external_dma(struct sdhci_host *host, bool en); +void sdhci_set_data_timeout_irq(struct sdhci_host *host, bool enable); +void __sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd); + +#endif /* __SDHCI_HW_H */ -- cgit v1.2.3