From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c | 4150 +++++++++++++++++++++++++ 1 file changed, 4150 insertions(+) create mode 100644 drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c new file mode 100644 index 000000000..aa4bf6c9a --- /dev/null +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c @@ -0,0 +1,4150 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright(c) 1999 - 2018 Intel Corporation. */ + +#include "ixgbe_x540.h" +#include "ixgbe_type.h" +#include "ixgbe_common.h" +#include "ixgbe_phy.h" + +static s32 ixgbe_setup_kr_speed_x550em(struct ixgbe_hw *, ixgbe_link_speed); +static s32 ixgbe_setup_fc_x550em(struct ixgbe_hw *); +static void ixgbe_fc_autoneg_fiber_x550em_a(struct ixgbe_hw *); +static void ixgbe_fc_autoneg_backplane_x550em_a(struct ixgbe_hw *); +static s32 ixgbe_setup_fc_backplane_x550em_a(struct ixgbe_hw *); + +static s32 ixgbe_get_invariants_X550_x(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + struct ixgbe_phy_info *phy = &hw->phy; + struct ixgbe_link_info *link = &hw->link; + + /* Start with X540 invariants, since so simular */ + ixgbe_get_invariants_X540(hw); + + if (mac->ops.get_media_type(hw) != ixgbe_media_type_copper) + phy->ops.set_phy_power = NULL; + + link->addr = IXGBE_CS4227; + + return 0; +} + +static s32 ixgbe_get_invariants_X550_x_fw(struct ixgbe_hw *hw) +{ + struct ixgbe_phy_info *phy = &hw->phy; + + /* Start with X540 invariants, since so similar */ + ixgbe_get_invariants_X540(hw); + + phy->ops.set_phy_power = NULL; + + return 0; +} + +static s32 ixgbe_get_invariants_X550_a(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + struct ixgbe_phy_info *phy = &hw->phy; + + /* Start with X540 invariants, since so simular */ + ixgbe_get_invariants_X540(hw); + + if (mac->ops.get_media_type(hw) != ixgbe_media_type_copper) + phy->ops.set_phy_power = NULL; + + return 0; +} + +static s32 ixgbe_get_invariants_X550_a_fw(struct ixgbe_hw *hw) +{ + struct ixgbe_phy_info *phy = &hw->phy; + + /* Start with X540 invariants, since so similar */ + ixgbe_get_invariants_X540(hw); + + phy->ops.set_phy_power = NULL; + + return 0; +} + +/** ixgbe_setup_mux_ctl - Setup ESDP register for I2C mux control + * @hw: pointer to hardware structure + **/ +static void ixgbe_setup_mux_ctl(struct ixgbe_hw *hw) +{ + u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + + if (hw->bus.lan_id) { + esdp &= ~(IXGBE_ESDP_SDP1_NATIVE | IXGBE_ESDP_SDP1); + esdp |= IXGBE_ESDP_SDP1_DIR; + } + esdp &= ~(IXGBE_ESDP_SDP0_NATIVE | IXGBE_ESDP_SDP0_DIR); + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + IXGBE_WRITE_FLUSH(hw); +} + +/** + * ixgbe_read_cs4227 - Read CS4227 register + * @hw: pointer to hardware structure + * @reg: register number to write + * @value: pointer to receive value read + * + * Returns status code + */ +static s32 ixgbe_read_cs4227(struct ixgbe_hw *hw, u16 reg, u16 *value) +{ + return hw->link.ops.read_link_unlocked(hw, hw->link.addr, reg, value); +} + +/** + * ixgbe_write_cs4227 - Write CS4227 register + * @hw: pointer to hardware structure + * @reg: register number to write + * @value: value to write to register + * + * Returns status code + */ +static s32 ixgbe_write_cs4227(struct ixgbe_hw *hw, u16 reg, u16 value) +{ + return hw->link.ops.write_link_unlocked(hw, hw->link.addr, reg, value); +} + +/** + * ixgbe_read_pe - Read register from port expander + * @hw: pointer to hardware structure + * @reg: register number to read + * @value: pointer to receive read value + * + * Returns status code + */ +static s32 ixgbe_read_pe(struct ixgbe_hw *hw, u8 reg, u8 *value) +{ + s32 status; + + status = ixgbe_read_i2c_byte_generic_unlocked(hw, reg, IXGBE_PE, value); + if (status) + hw_err(hw, "port expander access failed with %d\n", status); + return status; +} + +/** + * ixgbe_write_pe - Write register to port expander + * @hw: pointer to hardware structure + * @reg: register number to write + * @value: value to write + * + * Returns status code + */ +static s32 ixgbe_write_pe(struct ixgbe_hw *hw, u8 reg, u8 value) +{ + s32 status; + + status = ixgbe_write_i2c_byte_generic_unlocked(hw, reg, IXGBE_PE, + value); + if (status) + hw_err(hw, "port expander access failed with %d\n", status); + return status; +} + +/** + * ixgbe_reset_cs4227 - Reset CS4227 using port expander + * @hw: pointer to hardware structure + * + * This function assumes that the caller has acquired the proper semaphore. + * Returns error code + */ +static s32 ixgbe_reset_cs4227(struct ixgbe_hw *hw) +{ + s32 status; + u32 retry; + u16 value; + u8 reg; + + /* Trigger hard reset. */ + status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®); + if (status) + return status; + reg |= IXGBE_PE_BIT1; + status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg); + if (status) + return status; + + status = ixgbe_read_pe(hw, IXGBE_PE_CONFIG, ®); + if (status) + return status; + reg &= ~IXGBE_PE_BIT1; + status = ixgbe_write_pe(hw, IXGBE_PE_CONFIG, reg); + if (status) + return status; + + status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®); + if (status) + return status; + reg &= ~IXGBE_PE_BIT1; + status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg); + if (status) + return status; + + usleep_range(IXGBE_CS4227_RESET_HOLD, IXGBE_CS4227_RESET_HOLD + 100); + + status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®); + if (status) + return status; + reg |= IXGBE_PE_BIT1; + status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg); + if (status) + return status; + + /* Wait for the reset to complete. */ + msleep(IXGBE_CS4227_RESET_DELAY); + for (retry = 0; retry < IXGBE_CS4227_RETRIES; retry++) { + status = ixgbe_read_cs4227(hw, IXGBE_CS4227_EFUSE_STATUS, + &value); + if (!status && value == IXGBE_CS4227_EEPROM_LOAD_OK) + break; + msleep(IXGBE_CS4227_CHECK_DELAY); + } + if (retry == IXGBE_CS4227_RETRIES) { + hw_err(hw, "CS4227 reset did not complete\n"); + return IXGBE_ERR_PHY; + } + + status = ixgbe_read_cs4227(hw, IXGBE_CS4227_EEPROM_STATUS, &value); + if (status || !(value & IXGBE_CS4227_EEPROM_LOAD_OK)) { + hw_err(hw, "CS4227 EEPROM did not load successfully\n"); + return IXGBE_ERR_PHY; + } + + return 0; +} + +/** + * ixgbe_check_cs4227 - Check CS4227 and reset as needed + * @hw: pointer to hardware structure + */ +static void ixgbe_check_cs4227(struct ixgbe_hw *hw) +{ + u32 swfw_mask = hw->phy.phy_semaphore_mask; + s32 status; + u16 value; + u8 retry; + + for (retry = 0; retry < IXGBE_CS4227_RETRIES; retry++) { + status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask); + if (status) { + hw_err(hw, "semaphore failed with %d\n", status); + msleep(IXGBE_CS4227_CHECK_DELAY); + continue; + } + + /* Get status of reset flow. */ + status = ixgbe_read_cs4227(hw, IXGBE_CS4227_SCRATCH, &value); + if (!status && value == IXGBE_CS4227_RESET_COMPLETE) + goto out; + + if (status || value != IXGBE_CS4227_RESET_PENDING) + break; + + /* Reset is pending. Wait and check again. */ + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + msleep(IXGBE_CS4227_CHECK_DELAY); + } + /* If still pending, assume other instance failed. */ + if (retry == IXGBE_CS4227_RETRIES) { + status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask); + if (status) { + hw_err(hw, "semaphore failed with %d\n", status); + return; + } + } + + /* Reset the CS4227. */ + status = ixgbe_reset_cs4227(hw); + if (status) { + hw_err(hw, "CS4227 reset failed: %d", status); + goto out; + } + + /* Reset takes so long, temporarily release semaphore in case the + * other driver instance is waiting for the reset indication. + */ + ixgbe_write_cs4227(hw, IXGBE_CS4227_SCRATCH, + IXGBE_CS4227_RESET_PENDING); + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + usleep_range(10000, 12000); + status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask); + if (status) { + hw_err(hw, "semaphore failed with %d", status); + return; + } + + /* Record completion for next time. */ + status = ixgbe_write_cs4227(hw, IXGBE_CS4227_SCRATCH, + IXGBE_CS4227_RESET_COMPLETE); + +out: + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + msleep(hw->eeprom.semaphore_delay); +} + +/** ixgbe_identify_phy_x550em - Get PHY type based on device id + * @hw: pointer to hardware structure + * + * Returns error code + */ +static s32 ixgbe_identify_phy_x550em(struct ixgbe_hw *hw) +{ + switch (hw->device_id) { + case IXGBE_DEV_ID_X550EM_A_SFP: + if (hw->bus.lan_id) + hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY1_SM; + else + hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY0_SM; + return ixgbe_identify_module_generic(hw); + case IXGBE_DEV_ID_X550EM_X_SFP: + /* set up for CS4227 usage */ + hw->phy.phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM; + ixgbe_setup_mux_ctl(hw); + ixgbe_check_cs4227(hw); + fallthrough; + case IXGBE_DEV_ID_X550EM_A_SFP_N: + return ixgbe_identify_module_generic(hw); + case IXGBE_DEV_ID_X550EM_X_KX4: + hw->phy.type = ixgbe_phy_x550em_kx4; + break; + case IXGBE_DEV_ID_X550EM_X_XFI: + hw->phy.type = ixgbe_phy_x550em_xfi; + break; + case IXGBE_DEV_ID_X550EM_X_KR: + case IXGBE_DEV_ID_X550EM_A_KR: + case IXGBE_DEV_ID_X550EM_A_KR_L: + hw->phy.type = ixgbe_phy_x550em_kr; + break; + case IXGBE_DEV_ID_X550EM_A_10G_T: + if (hw->bus.lan_id) + hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY1_SM; + else + hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY0_SM; + fallthrough; + case IXGBE_DEV_ID_X550EM_X_10G_T: + return ixgbe_identify_phy_generic(hw); + case IXGBE_DEV_ID_X550EM_X_1G_T: + hw->phy.type = ixgbe_phy_ext_1g_t; + break; + case IXGBE_DEV_ID_X550EM_A_1G_T: + case IXGBE_DEV_ID_X550EM_A_1G_T_L: + hw->phy.type = ixgbe_phy_fw; + hw->phy.ops.read_reg = NULL; + hw->phy.ops.write_reg = NULL; + if (hw->bus.lan_id) + hw->phy.phy_semaphore_mask |= IXGBE_GSSR_PHY1_SM; + else + hw->phy.phy_semaphore_mask |= IXGBE_GSSR_PHY0_SM; + break; + default: + break; + } + return 0; +} + +static s32 ixgbe_read_phy_reg_x550em(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 *phy_data) +{ + return IXGBE_NOT_IMPLEMENTED; +} + +static s32 ixgbe_write_phy_reg_x550em(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 phy_data) +{ + return IXGBE_NOT_IMPLEMENTED; +} + +/** + * ixgbe_read_i2c_combined_generic - Perform I2C read combined operation + * @hw: pointer to the hardware structure + * @addr: I2C bus address to read from + * @reg: I2C device register to read from + * @val: pointer to location to receive read value + * + * Returns an error code on error. + **/ +static s32 ixgbe_read_i2c_combined_generic(struct ixgbe_hw *hw, u8 addr, + u16 reg, u16 *val) +{ + return ixgbe_read_i2c_combined_generic_int(hw, addr, reg, val, true); +} + +/** + * ixgbe_read_i2c_combined_generic_unlocked - Do I2C read combined operation + * @hw: pointer to the hardware structure + * @addr: I2C bus address to read from + * @reg: I2C device register to read from + * @val: pointer to location to receive read value + * + * Returns an error code on error. + **/ +static s32 +ixgbe_read_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, u8 addr, + u16 reg, u16 *val) +{ + return ixgbe_read_i2c_combined_generic_int(hw, addr, reg, val, false); +} + +/** + * ixgbe_write_i2c_combined_generic - Perform I2C write combined operation + * @hw: pointer to the hardware structure + * @addr: I2C bus address to write to + * @reg: I2C device register to write to + * @val: value to write + * + * Returns an error code on error. + **/ +static s32 ixgbe_write_i2c_combined_generic(struct ixgbe_hw *hw, + u8 addr, u16 reg, u16 val) +{ + return ixgbe_write_i2c_combined_generic_int(hw, addr, reg, val, true); +} + +/** + * ixgbe_write_i2c_combined_generic_unlocked - Do I2C write combined operation + * @hw: pointer to the hardware structure + * @addr: I2C bus address to write to + * @reg: I2C device register to write to + * @val: value to write + * + * Returns an error code on error. + **/ +static s32 +ixgbe_write_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, + u8 addr, u16 reg, u16 val) +{ + return ixgbe_write_i2c_combined_generic_int(hw, addr, reg, val, false); +} + +/** + * ixgbe_fw_phy_activity - Perform an activity on a PHY + * @hw: pointer to hardware structure + * @activity: activity to perform + * @data: Pointer to 4 32-bit words of data + */ +s32 ixgbe_fw_phy_activity(struct ixgbe_hw *hw, u16 activity, + u32 (*data)[FW_PHY_ACT_DATA_COUNT]) +{ + union { + struct ixgbe_hic_phy_activity_req cmd; + struct ixgbe_hic_phy_activity_resp rsp; + } hic; + u16 retries = FW_PHY_ACT_RETRIES; + s32 rc; + u32 i; + + do { + memset(&hic, 0, sizeof(hic)); + hic.cmd.hdr.cmd = FW_PHY_ACT_REQ_CMD; + hic.cmd.hdr.buf_len = FW_PHY_ACT_REQ_LEN; + hic.cmd.hdr.checksum = FW_DEFAULT_CHECKSUM; + hic.cmd.port_number = hw->bus.lan_id; + hic.cmd.activity_id = cpu_to_le16(activity); + for (i = 0; i < ARRAY_SIZE(hic.cmd.data); ++i) + hic.cmd.data[i] = cpu_to_be32((*data)[i]); + + rc = ixgbe_host_interface_command(hw, &hic.cmd, sizeof(hic.cmd), + IXGBE_HI_COMMAND_TIMEOUT, + true); + if (rc) + return rc; + if (hic.rsp.hdr.cmd_or_resp.ret_status == + FW_CEM_RESP_STATUS_SUCCESS) { + for (i = 0; i < FW_PHY_ACT_DATA_COUNT; ++i) + (*data)[i] = be32_to_cpu(hic.rsp.data[i]); + return 0; + } + usleep_range(20, 30); + --retries; + } while (retries > 0); + + return IXGBE_ERR_HOST_INTERFACE_COMMAND; +} + +static const struct { + u16 fw_speed; + ixgbe_link_speed phy_speed; +} ixgbe_fw_map[] = { + { FW_PHY_ACT_LINK_SPEED_10, IXGBE_LINK_SPEED_10_FULL }, + { FW_PHY_ACT_LINK_SPEED_100, IXGBE_LINK_SPEED_100_FULL }, + { FW_PHY_ACT_LINK_SPEED_1G, IXGBE_LINK_SPEED_1GB_FULL }, + { FW_PHY_ACT_LINK_SPEED_2_5G, IXGBE_LINK_SPEED_2_5GB_FULL }, + { FW_PHY_ACT_LINK_SPEED_5G, IXGBE_LINK_SPEED_5GB_FULL }, + { FW_PHY_ACT_LINK_SPEED_10G, IXGBE_LINK_SPEED_10GB_FULL }, +}; + +/** + * ixgbe_get_phy_id_fw - Get the phy ID via firmware command + * @hw: pointer to hardware structure + * + * Returns error code + */ +static s32 ixgbe_get_phy_id_fw(struct ixgbe_hw *hw) +{ + u32 info[FW_PHY_ACT_DATA_COUNT] = { 0 }; + u16 phy_speeds; + u16 phy_id_lo; + s32 rc; + u16 i; + + if (hw->phy.id) + return 0; + + rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_GET_PHY_INFO, &info); + if (rc) + return rc; + + hw->phy.speeds_supported = 0; + phy_speeds = info[0] & FW_PHY_INFO_SPEED_MASK; + for (i = 0; i < ARRAY_SIZE(ixgbe_fw_map); ++i) { + if (phy_speeds & ixgbe_fw_map[i].fw_speed) + hw->phy.speeds_supported |= ixgbe_fw_map[i].phy_speed; + } + + hw->phy.id = info[0] & FW_PHY_INFO_ID_HI_MASK; + phy_id_lo = info[1] & FW_PHY_INFO_ID_LO_MASK; + hw->phy.id |= phy_id_lo & IXGBE_PHY_REVISION_MASK; + hw->phy.revision = phy_id_lo & ~IXGBE_PHY_REVISION_MASK; + if (!hw->phy.id || hw->phy.id == IXGBE_PHY_REVISION_MASK) + return IXGBE_ERR_PHY_ADDR_INVALID; + + hw->phy.autoneg_advertised = hw->phy.speeds_supported; + hw->phy.eee_speeds_supported = IXGBE_LINK_SPEED_100_FULL | + IXGBE_LINK_SPEED_1GB_FULL; + hw->phy.eee_speeds_advertised = hw->phy.eee_speeds_supported; + return 0; +} + +/** + * ixgbe_identify_phy_fw - Get PHY type based on firmware command + * @hw: pointer to hardware structure + * + * Returns error code + */ +static s32 ixgbe_identify_phy_fw(struct ixgbe_hw *hw) +{ + if (hw->bus.lan_id) + hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY1_SM; + else + hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY0_SM; + + hw->phy.type = ixgbe_phy_fw; + hw->phy.ops.read_reg = NULL; + hw->phy.ops.write_reg = NULL; + return ixgbe_get_phy_id_fw(hw); +} + +/** + * ixgbe_shutdown_fw_phy - Shutdown a firmware-controlled PHY + * @hw: pointer to hardware structure + * + * Returns error code + */ +static s32 ixgbe_shutdown_fw_phy(struct ixgbe_hw *hw) +{ + u32 setup[FW_PHY_ACT_DATA_COUNT] = { 0 }; + + setup[0] = FW_PHY_ACT_FORCE_LINK_DOWN_OFF; + return ixgbe_fw_phy_activity(hw, FW_PHY_ACT_FORCE_LINK_DOWN, &setup); +} + +/** + * ixgbe_setup_fw_link - Setup firmware-controlled PHYs + * @hw: pointer to hardware structure + */ +static s32 ixgbe_setup_fw_link(struct ixgbe_hw *hw) +{ + u32 setup[FW_PHY_ACT_DATA_COUNT] = { 0 }; + s32 rc; + u16 i; + + if (hw->phy.reset_disable || ixgbe_check_reset_blocked(hw)) + return 0; + + if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) { + hw_err(hw, "rx_pause not valid in strict IEEE mode\n"); + return IXGBE_ERR_INVALID_LINK_SETTINGS; + } + + switch (hw->fc.requested_mode) { + case ixgbe_fc_full: + setup[0] |= FW_PHY_ACT_SETUP_LINK_PAUSE_RXTX << + FW_PHY_ACT_SETUP_LINK_PAUSE_SHIFT; + break; + case ixgbe_fc_rx_pause: + setup[0] |= FW_PHY_ACT_SETUP_LINK_PAUSE_RX << + FW_PHY_ACT_SETUP_LINK_PAUSE_SHIFT; + break; + case ixgbe_fc_tx_pause: + setup[0] |= FW_PHY_ACT_SETUP_LINK_PAUSE_TX << + FW_PHY_ACT_SETUP_LINK_PAUSE_SHIFT; + break; + default: + break; + } + + for (i = 0; i < ARRAY_SIZE(ixgbe_fw_map); ++i) { + if (hw->phy.autoneg_advertised & ixgbe_fw_map[i].phy_speed) + setup[0] |= ixgbe_fw_map[i].fw_speed; + } + setup[0] |= FW_PHY_ACT_SETUP_LINK_HP | FW_PHY_ACT_SETUP_LINK_AN; + + if (hw->phy.eee_speeds_advertised) + setup[0] |= FW_PHY_ACT_SETUP_LINK_EEE; + + rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_SETUP_LINK, &setup); + if (rc) + return rc; + if (setup[0] == FW_PHY_ACT_SETUP_LINK_RSP_DOWN) + return IXGBE_ERR_OVERTEMP; + return 0; +} + +/** + * ixgbe_fc_autoneg_fw - Set up flow control for FW-controlled PHYs + * @hw: pointer to hardware structure + * + * Called at init time to set up flow control. + */ +static s32 ixgbe_fc_autoneg_fw(struct ixgbe_hw *hw) +{ + if (hw->fc.requested_mode == ixgbe_fc_default) + hw->fc.requested_mode = ixgbe_fc_full; + + return ixgbe_setup_fw_link(hw); +} + +/** ixgbe_init_eeprom_params_X550 - Initialize EEPROM params + * @hw: pointer to hardware structure + * + * Initializes the EEPROM parameters ixgbe_eeprom_info within the + * ixgbe_hw struct in order to set up EEPROM access. + **/ +static s32 ixgbe_init_eeprom_params_X550(struct ixgbe_hw *hw) +{ + struct ixgbe_eeprom_info *eeprom = &hw->eeprom; + u32 eec; + u16 eeprom_size; + + if (eeprom->type == ixgbe_eeprom_uninitialized) { + eeprom->semaphore_delay = 10; + eeprom->type = ixgbe_flash; + + eec = IXGBE_READ_REG(hw, IXGBE_EEC(hw)); + eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >> + IXGBE_EEC_SIZE_SHIFT); + eeprom->word_size = BIT(eeprom_size + + IXGBE_EEPROM_WORD_SIZE_SHIFT); + + hw_dbg(hw, "Eeprom params: type = %d, size = %d\n", + eeprom->type, eeprom->word_size); + } + + return 0; +} + +/** + * ixgbe_iosf_wait - Wait for IOSF command completion + * @hw: pointer to hardware structure + * @ctrl: pointer to location to receive final IOSF control value + * + * Return: failing status on timeout + * + * Note: ctrl can be NULL if the IOSF control register value is not needed + */ +static s32 ixgbe_iosf_wait(struct ixgbe_hw *hw, u32 *ctrl) +{ + u32 i, command; + + /* Check every 10 usec to see if the address cycle completed. + * The SB IOSF BUSY bit will clear when the operation is + * complete. + */ + for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { + command = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL); + if (!(command & IXGBE_SB_IOSF_CTRL_BUSY)) + break; + udelay(10); + } + if (ctrl) + *ctrl = command; + if (i == IXGBE_MDIO_COMMAND_TIMEOUT) { + hw_dbg(hw, "IOSF wait timed out\n"); + return IXGBE_ERR_PHY; + } + + return 0; +} + +/** ixgbe_read_iosf_sb_reg_x550 - Writes a value to specified register of the + * IOSF device + * @hw: pointer to hardware structure + * @reg_addr: 32 bit PHY register to write + * @device_type: 3 bit device type + * @phy_data: Pointer to read data from the register + **/ +static s32 ixgbe_read_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u32 *data) +{ + u32 gssr = IXGBE_GSSR_PHY1_SM | IXGBE_GSSR_PHY0_SM; + u32 command, error; + s32 ret; + + ret = hw->mac.ops.acquire_swfw_sync(hw, gssr); + if (ret) + return ret; + + ret = ixgbe_iosf_wait(hw, NULL); + if (ret) + goto out; + + command = ((reg_addr << IXGBE_SB_IOSF_CTRL_ADDR_SHIFT) | + (device_type << IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT)); + + /* Write IOSF control register */ + IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL, command); + + ret = ixgbe_iosf_wait(hw, &command); + + if ((command & IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK) != 0) { + error = (command & IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK) >> + IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT; + hw_dbg(hw, "Failed to read, error %x\n", error); + return IXGBE_ERR_PHY; + } + + if (!ret) + *data = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_DATA); + +out: + hw->mac.ops.release_swfw_sync(hw, gssr); + return ret; +} + +/** + * ixgbe_get_phy_token - Get the token for shared PHY access + * @hw: Pointer to hardware structure + */ +static s32 ixgbe_get_phy_token(struct ixgbe_hw *hw) +{ + struct ixgbe_hic_phy_token_req token_cmd; + s32 status; + + token_cmd.hdr.cmd = FW_PHY_TOKEN_REQ_CMD; + token_cmd.hdr.buf_len = FW_PHY_TOKEN_REQ_LEN; + token_cmd.hdr.cmd_or_resp.cmd_resv = 0; + token_cmd.hdr.checksum = FW_DEFAULT_CHECKSUM; + token_cmd.port_number = hw->bus.lan_id; + token_cmd.command_type = FW_PHY_TOKEN_REQ; + token_cmd.pad = 0; + status = ixgbe_host_interface_command(hw, &token_cmd, sizeof(token_cmd), + IXGBE_HI_COMMAND_TIMEOUT, + true); + if (status) + return status; + if (token_cmd.hdr.cmd_or_resp.ret_status == FW_PHY_TOKEN_OK) + return 0; + if (token_cmd.hdr.cmd_or_resp.ret_status != FW_PHY_TOKEN_RETRY) + return IXGBE_ERR_FW_RESP_INVALID; + + return IXGBE_ERR_TOKEN_RETRY; +} + +/** + * ixgbe_put_phy_token - Put the token for shared PHY access + * @hw: Pointer to hardware structure + */ +static s32 ixgbe_put_phy_token(struct ixgbe_hw *hw) +{ + struct ixgbe_hic_phy_token_req token_cmd; + s32 status; + + token_cmd.hdr.cmd = FW_PHY_TOKEN_REQ_CMD; + token_cmd.hdr.buf_len = FW_PHY_TOKEN_REQ_LEN; + token_cmd.hdr.cmd_or_resp.cmd_resv = 0; + token_cmd.hdr.checksum = FW_DEFAULT_CHECKSUM; + token_cmd.port_number = hw->bus.lan_id; + token_cmd.command_type = FW_PHY_TOKEN_REL; + token_cmd.pad = 0; + status = ixgbe_host_interface_command(hw, &token_cmd, sizeof(token_cmd), + IXGBE_HI_COMMAND_TIMEOUT, + true); + if (status) + return status; + if (token_cmd.hdr.cmd_or_resp.ret_status == FW_PHY_TOKEN_OK) + return 0; + return IXGBE_ERR_FW_RESP_INVALID; +} + +/** + * ixgbe_write_iosf_sb_reg_x550a - Write to IOSF PHY register + * @hw: pointer to hardware structure + * @reg_addr: 32 bit PHY register to write + * @device_type: 3 bit device type + * @data: Data to write to the register + **/ +static s32 ixgbe_write_iosf_sb_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr, + __always_unused u32 device_type, + u32 data) +{ + struct ixgbe_hic_internal_phy_req write_cmd; + + memset(&write_cmd, 0, sizeof(write_cmd)); + write_cmd.hdr.cmd = FW_INT_PHY_REQ_CMD; + write_cmd.hdr.buf_len = FW_INT_PHY_REQ_LEN; + write_cmd.hdr.checksum = FW_DEFAULT_CHECKSUM; + write_cmd.port_number = hw->bus.lan_id; + write_cmd.command_type = FW_INT_PHY_REQ_WRITE; + write_cmd.address = cpu_to_be16(reg_addr); + write_cmd.write_data = cpu_to_be32(data); + + return ixgbe_host_interface_command(hw, &write_cmd, sizeof(write_cmd), + IXGBE_HI_COMMAND_TIMEOUT, false); +} + +/** + * ixgbe_read_iosf_sb_reg_x550a - Read from IOSF PHY register + * @hw: pointer to hardware structure + * @reg_addr: 32 bit PHY register to write + * @device_type: 3 bit device type + * @data: Pointer to read data from the register + **/ +static s32 ixgbe_read_iosf_sb_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr, + __always_unused u32 device_type, + u32 *data) +{ + union { + struct ixgbe_hic_internal_phy_req cmd; + struct ixgbe_hic_internal_phy_resp rsp; + } hic; + s32 status; + + memset(&hic, 0, sizeof(hic)); + hic.cmd.hdr.cmd = FW_INT_PHY_REQ_CMD; + hic.cmd.hdr.buf_len = FW_INT_PHY_REQ_LEN; + hic.cmd.hdr.checksum = FW_DEFAULT_CHECKSUM; + hic.cmd.port_number = hw->bus.lan_id; + hic.cmd.command_type = FW_INT_PHY_REQ_READ; + hic.cmd.address = cpu_to_be16(reg_addr); + + status = ixgbe_host_interface_command(hw, &hic.cmd, sizeof(hic.cmd), + IXGBE_HI_COMMAND_TIMEOUT, true); + + /* Extract the register value from the response. */ + *data = be32_to_cpu(hic.rsp.read_data); + + return status; +} + +/** ixgbe_read_ee_hostif_buffer_X550- Read EEPROM word(s) using hostif + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to read + * @words: number of words + * @data: word(s) read from the EEPROM + * + * Reads a 16 bit word(s) from the EEPROM using the hostif. + **/ +static s32 ixgbe_read_ee_hostif_buffer_X550(struct ixgbe_hw *hw, + u16 offset, u16 words, u16 *data) +{ + const u32 mask = IXGBE_GSSR_SW_MNG_SM | IXGBE_GSSR_EEP_SM; + struct ixgbe_hic_read_shadow_ram buffer; + u32 current_word = 0; + u16 words_to_read; + s32 status; + u32 i; + + /* Take semaphore for the entire operation. */ + status = hw->mac.ops.acquire_swfw_sync(hw, mask); + if (status) { + hw_dbg(hw, "EEPROM read buffer - semaphore failed\n"); + return status; + } + + while (words) { + if (words > FW_MAX_READ_BUFFER_SIZE / 2) + words_to_read = FW_MAX_READ_BUFFER_SIZE / 2; + else + words_to_read = words; + + buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD; + buffer.hdr.req.buf_lenh = 0; + buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN; + buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM; + + /* convert offset from words to bytes */ + buffer.address = (__force u32)cpu_to_be32((offset + + current_word) * 2); + buffer.length = (__force u16)cpu_to_be16(words_to_read * 2); + buffer.pad2 = 0; + buffer.pad3 = 0; + + status = ixgbe_hic_unlocked(hw, (u32 *)&buffer, sizeof(buffer), + IXGBE_HI_COMMAND_TIMEOUT); + if (status) { + hw_dbg(hw, "Host interface command failed\n"); + goto out; + } + + for (i = 0; i < words_to_read; i++) { + u32 reg = IXGBE_FLEX_MNG + (FW_NVM_DATA_OFFSET << 2) + + 2 * i; + u32 value = IXGBE_READ_REG(hw, reg); + + data[current_word] = (u16)(value & 0xffff); + current_word++; + i++; + if (i < words_to_read) { + value >>= 16; + data[current_word] = (u16)(value & 0xffff); + current_word++; + } + } + words -= words_to_read; + } + +out: + hw->mac.ops.release_swfw_sync(hw, mask); + return status; +} + +/** ixgbe_checksum_ptr_x550 - Checksum one pointer region + * @hw: pointer to hardware structure + * @ptr: pointer offset in eeprom + * @size: size of section pointed by ptr, if 0 first word will be used as size + * @csum: address of checksum to update + * + * Returns error status for any failure + **/ +static s32 ixgbe_checksum_ptr_x550(struct ixgbe_hw *hw, u16 ptr, + u16 size, u16 *csum, u16 *buffer, + u32 buffer_size) +{ + u16 buf[256]; + s32 status; + u16 length, bufsz, i, start; + u16 *local_buffer; + + bufsz = ARRAY_SIZE(buf); + + /* Read a chunk at the pointer location */ + if (!buffer) { + status = ixgbe_read_ee_hostif_buffer_X550(hw, ptr, bufsz, buf); + if (status) { + hw_dbg(hw, "Failed to read EEPROM image\n"); + return status; + } + local_buffer = buf; + } else { + if (buffer_size < ptr) + return IXGBE_ERR_PARAM; + local_buffer = &buffer[ptr]; + } + + if (size) { + start = 0; + length = size; + } else { + start = 1; + length = local_buffer[0]; + + /* Skip pointer section if length is invalid. */ + if (length == 0xFFFF || length == 0 || + (ptr + length) >= hw->eeprom.word_size) + return 0; + } + + if (buffer && ((u32)start + (u32)length > buffer_size)) + return IXGBE_ERR_PARAM; + + for (i = start; length; i++, length--) { + if (i == bufsz && !buffer) { + ptr += bufsz; + i = 0; + if (length < bufsz) + bufsz = length; + + /* Read a chunk at the pointer location */ + status = ixgbe_read_ee_hostif_buffer_X550(hw, ptr, + bufsz, buf); + if (status) { + hw_dbg(hw, "Failed to read EEPROM image\n"); + return status; + } + } + *csum += local_buffer[i]; + } + return 0; +} + +/** ixgbe_calc_checksum_X550 - Calculates and returns the checksum + * @hw: pointer to hardware structure + * @buffer: pointer to buffer containing calculated checksum + * @buffer_size: size of buffer + * + * Returns a negative error code on error, or the 16-bit checksum + **/ +static s32 ixgbe_calc_checksum_X550(struct ixgbe_hw *hw, u16 *buffer, + u32 buffer_size) +{ + u16 eeprom_ptrs[IXGBE_EEPROM_LAST_WORD + 1]; + u16 *local_buffer; + s32 status; + u16 checksum = 0; + u16 pointer, i, size; + + hw->eeprom.ops.init_params(hw); + + if (!buffer) { + /* Read pointer area */ + status = ixgbe_read_ee_hostif_buffer_X550(hw, 0, + IXGBE_EEPROM_LAST_WORD + 1, + eeprom_ptrs); + if (status) { + hw_dbg(hw, "Failed to read EEPROM image\n"); + return status; + } + local_buffer = eeprom_ptrs; + } else { + if (buffer_size < IXGBE_EEPROM_LAST_WORD) + return IXGBE_ERR_PARAM; + local_buffer = buffer; + } + + /* For X550 hardware include 0x0-0x41 in the checksum, skip the + * checksum word itself + */ + for (i = 0; i <= IXGBE_EEPROM_LAST_WORD; i++) + if (i != IXGBE_EEPROM_CHECKSUM) + checksum += local_buffer[i]; + + /* Include all data from pointers 0x3, 0x6-0xE. This excludes the + * FW, PHY module, and PCIe Expansion/Option ROM pointers. + */ + for (i = IXGBE_PCIE_ANALOG_PTR_X550; i < IXGBE_FW_PTR; i++) { + if (i == IXGBE_PHY_PTR || i == IXGBE_OPTION_ROM_PTR) + continue; + + pointer = local_buffer[i]; + + /* Skip pointer section if the pointer is invalid. */ + if (pointer == 0xFFFF || pointer == 0 || + pointer >= hw->eeprom.word_size) + continue; + + switch (i) { + case IXGBE_PCIE_GENERAL_PTR: + size = IXGBE_IXGBE_PCIE_GENERAL_SIZE; + break; + case IXGBE_PCIE_CONFIG0_PTR: + case IXGBE_PCIE_CONFIG1_PTR: + size = IXGBE_PCIE_CONFIG_SIZE; + break; + default: + size = 0; + break; + } + + status = ixgbe_checksum_ptr_x550(hw, pointer, size, &checksum, + buffer, buffer_size); + if (status) + return status; + } + + checksum = (u16)IXGBE_EEPROM_SUM - checksum; + + return (s32)checksum; +} + +/** ixgbe_calc_eeprom_checksum_X550 - Calculates and returns the checksum + * @hw: pointer to hardware structure + * + * Returns a negative error code on error, or the 16-bit checksum + **/ +static s32 ixgbe_calc_eeprom_checksum_X550(struct ixgbe_hw *hw) +{ + return ixgbe_calc_checksum_X550(hw, NULL, 0); +} + +/** ixgbe_read_ee_hostif_X550 - Read EEPROM word using a host interface command + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to read + * @data: word read from the EEPROM + * + * Reads a 16 bit word from the EEPROM using the hostif. + **/ +static s32 ixgbe_read_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset, u16 *data) +{ + const u32 mask = IXGBE_GSSR_SW_MNG_SM | IXGBE_GSSR_EEP_SM; + struct ixgbe_hic_read_shadow_ram buffer; + s32 status; + + buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD; + buffer.hdr.req.buf_lenh = 0; + buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN; + buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM; + + /* convert offset from words to bytes */ + buffer.address = (__force u32)cpu_to_be32(offset * 2); + /* one word */ + buffer.length = (__force u16)cpu_to_be16(sizeof(u16)); + + status = hw->mac.ops.acquire_swfw_sync(hw, mask); + if (status) + return status; + + status = ixgbe_hic_unlocked(hw, (u32 *)&buffer, sizeof(buffer), + IXGBE_HI_COMMAND_TIMEOUT); + if (!status) { + *data = (u16)IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, + FW_NVM_DATA_OFFSET); + } + + hw->mac.ops.release_swfw_sync(hw, mask); + return status; +} + +/** ixgbe_validate_eeprom_checksum_X550 - Validate EEPROM checksum + * @hw: pointer to hardware structure + * @checksum_val: calculated checksum + * + * Performs checksum calculation and validates the EEPROM checksum. If the + * caller does not need checksum_val, the value can be NULL. + **/ +static s32 ixgbe_validate_eeprom_checksum_X550(struct ixgbe_hw *hw, + u16 *checksum_val) +{ + s32 status; + u16 checksum; + u16 read_checksum = 0; + + /* Read the first word from the EEPROM. If this times out or fails, do + * not continue or we could be in for a very long wait while every + * EEPROM read fails + */ + status = hw->eeprom.ops.read(hw, 0, &checksum); + if (status) { + hw_dbg(hw, "EEPROM read failed\n"); + return status; + } + + status = hw->eeprom.ops.calc_checksum(hw); + if (status < 0) + return status; + + checksum = (u16)(status & 0xffff); + + status = ixgbe_read_ee_hostif_X550(hw, IXGBE_EEPROM_CHECKSUM, + &read_checksum); + if (status) + return status; + + /* Verify read checksum from EEPROM is the same as + * calculated checksum + */ + if (read_checksum != checksum) { + status = IXGBE_ERR_EEPROM_CHECKSUM; + hw_dbg(hw, "Invalid EEPROM checksum"); + } + + /* If the user cares, return the calculated checksum */ + if (checksum_val) + *checksum_val = checksum; + + return status; +} + +/** ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to write + * @data: word write to the EEPROM + * + * Write a 16 bit word to the EEPROM using the hostif. + **/ +static s32 ixgbe_write_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset, + u16 data) +{ + s32 status; + struct ixgbe_hic_write_shadow_ram buffer; + + buffer.hdr.req.cmd = FW_WRITE_SHADOW_RAM_CMD; + buffer.hdr.req.buf_lenh = 0; + buffer.hdr.req.buf_lenl = FW_WRITE_SHADOW_RAM_LEN; + buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM; + + /* one word */ + buffer.length = cpu_to_be16(sizeof(u16)); + buffer.data = data; + buffer.address = cpu_to_be32(offset * 2); + + status = ixgbe_host_interface_command(hw, &buffer, sizeof(buffer), + IXGBE_HI_COMMAND_TIMEOUT, false); + return status; +} + +/** ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to write + * @data: word write to the EEPROM + * + * Write a 16 bit word to the EEPROM using the hostif. + **/ +static s32 ixgbe_write_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset, u16 data) +{ + s32 status = 0; + + if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0) { + status = ixgbe_write_ee_hostif_data_X550(hw, offset, data); + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); + } else { + hw_dbg(hw, "write ee hostif failed to get semaphore"); + status = IXGBE_ERR_SWFW_SYNC; + } + + return status; +} + +/** ixgbe_update_flash_X550 - Instruct HW to copy EEPROM to Flash device + * @hw: pointer to hardware structure + * + * Issue a shadow RAM dump to FW to copy EEPROM from shadow RAM to the flash. + **/ +static s32 ixgbe_update_flash_X550(struct ixgbe_hw *hw) +{ + s32 status = 0; + union ixgbe_hic_hdr2 buffer; + + buffer.req.cmd = FW_SHADOW_RAM_DUMP_CMD; + buffer.req.buf_lenh = 0; + buffer.req.buf_lenl = FW_SHADOW_RAM_DUMP_LEN; + buffer.req.checksum = FW_DEFAULT_CHECKSUM; + + status = ixgbe_host_interface_command(hw, &buffer, sizeof(buffer), + IXGBE_HI_COMMAND_TIMEOUT, false); + return status; +} + +/** + * ixgbe_get_bus_info_X550em - Set PCI bus info + * @hw: pointer to hardware structure + * + * Sets bus link width and speed to unknown because X550em is + * not a PCI device. + **/ +static s32 ixgbe_get_bus_info_X550em(struct ixgbe_hw *hw) +{ + hw->bus.type = ixgbe_bus_type_internal; + hw->bus.width = ixgbe_bus_width_unknown; + hw->bus.speed = ixgbe_bus_speed_unknown; + + hw->mac.ops.set_lan_id(hw); + + return 0; +} + +/** + * ixgbe_fw_recovery_mode_X550 - Check FW NVM recovery mode + * @hw: pointer t hardware structure + * + * Returns true if in FW NVM recovery mode. + */ +static bool ixgbe_fw_recovery_mode_X550(struct ixgbe_hw *hw) +{ + u32 fwsm; + + fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM(hw)); + return !!(fwsm & IXGBE_FWSM_FW_NVM_RECOVERY_MODE); +} + +/** ixgbe_disable_rx_x550 - Disable RX unit + * + * Enables the Rx DMA unit for x550 + **/ +static void ixgbe_disable_rx_x550(struct ixgbe_hw *hw) +{ + u32 rxctrl, pfdtxgswc; + s32 status; + struct ixgbe_hic_disable_rxen fw_cmd; + + rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL); + if (rxctrl & IXGBE_RXCTRL_RXEN) { + pfdtxgswc = IXGBE_READ_REG(hw, IXGBE_PFDTXGSWC); + if (pfdtxgswc & IXGBE_PFDTXGSWC_VT_LBEN) { + pfdtxgswc &= ~IXGBE_PFDTXGSWC_VT_LBEN; + IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, pfdtxgswc); + hw->mac.set_lben = true; + } else { + hw->mac.set_lben = false; + } + + fw_cmd.hdr.cmd = FW_DISABLE_RXEN_CMD; + fw_cmd.hdr.buf_len = FW_DISABLE_RXEN_LEN; + fw_cmd.hdr.checksum = FW_DEFAULT_CHECKSUM; + fw_cmd.port_number = hw->bus.lan_id; + + status = ixgbe_host_interface_command(hw, &fw_cmd, + sizeof(struct ixgbe_hic_disable_rxen), + IXGBE_HI_COMMAND_TIMEOUT, true); + + /* If we fail - disable RX using register write */ + if (status) { + rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL); + if (rxctrl & IXGBE_RXCTRL_RXEN) { + rxctrl &= ~IXGBE_RXCTRL_RXEN; + IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl); + } + } + } +} + +/** ixgbe_update_eeprom_checksum_X550 - Updates the EEPROM checksum and flash + * @hw: pointer to hardware structure + * + * After writing EEPROM to shadow RAM using EEWR register, software calculates + * checksum and updates the EEPROM and instructs the hardware to update + * the flash. + **/ +static s32 ixgbe_update_eeprom_checksum_X550(struct ixgbe_hw *hw) +{ + s32 status; + u16 checksum = 0; + + /* Read the first word from the EEPROM. If this times out or fails, do + * not continue or we could be in for a very long wait while every + * EEPROM read fails + */ + status = ixgbe_read_ee_hostif_X550(hw, 0, &checksum); + if (status) { + hw_dbg(hw, "EEPROM read failed\n"); + return status; + } + + status = ixgbe_calc_eeprom_checksum_X550(hw); + if (status < 0) + return status; + + checksum = (u16)(status & 0xffff); + + status = ixgbe_write_ee_hostif_X550(hw, IXGBE_EEPROM_CHECKSUM, + checksum); + if (status) + return status; + + status = ixgbe_update_flash_X550(hw); + + return status; +} + +/** ixgbe_write_ee_hostif_buffer_X550 - Write EEPROM word(s) using hostif + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to write + * @words: number of words + * @data: word(s) write to the EEPROM + * + * + * Write a 16 bit word(s) to the EEPROM using the hostif. + **/ +static s32 ixgbe_write_ee_hostif_buffer_X550(struct ixgbe_hw *hw, + u16 offset, u16 words, + u16 *data) +{ + s32 status = 0; + u32 i = 0; + + /* Take semaphore for the entire operation. */ + status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM); + if (status) { + hw_dbg(hw, "EEPROM write buffer - semaphore failed\n"); + return status; + } + + for (i = 0; i < words; i++) { + status = ixgbe_write_ee_hostif_data_X550(hw, offset + i, + data[i]); + if (status) { + hw_dbg(hw, "Eeprom buffered write failed\n"); + break; + } + } + + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); + + return status; +} + +/** ixgbe_write_iosf_sb_reg_x550 - Writes a value to specified register of the + * IOSF device + * + * @hw: pointer to hardware structure + * @reg_addr: 32 bit PHY register to write + * @device_type: 3 bit device type + * @data: Data to write to the register + **/ +static s32 ixgbe_write_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u32 data) +{ + u32 gssr = IXGBE_GSSR_PHY1_SM | IXGBE_GSSR_PHY0_SM; + u32 command, error; + s32 ret; + + ret = hw->mac.ops.acquire_swfw_sync(hw, gssr); + if (ret) + return ret; + + ret = ixgbe_iosf_wait(hw, NULL); + if (ret) + goto out; + + command = ((reg_addr << IXGBE_SB_IOSF_CTRL_ADDR_SHIFT) | + (device_type << IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT)); + + /* Write IOSF control register */ + IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL, command); + + /* Write IOSF data register */ + IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_DATA, data); + + ret = ixgbe_iosf_wait(hw, &command); + + if ((command & IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK) != 0) { + error = (command & IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK) >> + IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT; + hw_dbg(hw, "Failed to write, error %x\n", error); + return IXGBE_ERR_PHY; + } + +out: + hw->mac.ops.release_swfw_sync(hw, gssr); + return ret; +} + +/** + * ixgbe_setup_ixfi_x550em_x - MAC specific iXFI configuration + * @hw: pointer to hardware structure + * + * iXfI configuration needed for ixgbe_mac_X550EM_x devices. + **/ +static s32 ixgbe_setup_ixfi_x550em_x(struct ixgbe_hw *hw) +{ + s32 status; + u32 reg_val; + + /* Disable training protocol FSM. */ + status = ixgbe_read_iosf_sb_reg_x550(hw, + IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + if (status) + return status; + + reg_val |= IXGBE_KRM_RX_TRN_LINKUP_CTRL_CONV_WO_PROTOCOL; + status = ixgbe_write_iosf_sb_reg_x550(hw, + IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + if (status) + return status; + + /* Disable Flex from training TXFFE. */ + status = ixgbe_read_iosf_sb_reg_x550(hw, + IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + if (status) + return status; + + reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_C0_EN; + reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN; + reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN; + status = ixgbe_write_iosf_sb_reg_x550(hw, + IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + if (status) + return status; + + status = ixgbe_read_iosf_sb_reg_x550(hw, + IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + if (status) + return status; + + reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_C0_EN; + reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN; + reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN; + status = ixgbe_write_iosf_sb_reg_x550(hw, + IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + if (status) + return status; + + /* Enable override for coefficients. */ + status = ixgbe_read_iosf_sb_reg_x550(hw, + IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + if (status) + return status; + + reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_OVRRD_EN; + reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CZERO_EN; + reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CPLUS1_OVRRD_EN; + reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CMINUS1_OVRRD_EN; + status = ixgbe_write_iosf_sb_reg_x550(hw, + IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + return status; +} + +/** + * ixgbe_restart_an_internal_phy_x550em - restart autonegotiation for the + * internal PHY + * @hw: pointer to hardware structure + **/ +static s32 ixgbe_restart_an_internal_phy_x550em(struct ixgbe_hw *hw) +{ + s32 status; + u32 link_ctrl; + + /* Restart auto-negotiation. */ + status = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &link_ctrl); + + if (status) { + hw_dbg(hw, "Auto-negotiation did not complete\n"); + return status; + } + + link_ctrl |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART; + status = hw->mac.ops.write_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, link_ctrl); + + if (hw->mac.type == ixgbe_mac_x550em_a) { + u32 flx_mask_st20; + + /* Indicate to FW that AN restart has been asserted */ + status = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &flx_mask_st20); + + if (status) { + hw_dbg(hw, "Auto-negotiation did not complete\n"); + return status; + } + + flx_mask_st20 |= IXGBE_KRM_PMD_FLX_MASK_ST20_FW_AN_RESTART; + status = hw->mac.ops.write_iosf_sb_reg(hw, + IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, flx_mask_st20); + } + + return status; +} + +/** ixgbe_setup_ixfi_x550em - Configure the KR PHY for iXFI mode. + * @hw: pointer to hardware structure + * @speed: the link speed to force + * + * Configures the integrated KR PHY to use iXFI mode. Used to connect an + * internal and external PHY at a specific speed, without autonegotiation. + **/ +static s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed) +{ + struct ixgbe_mac_info *mac = &hw->mac; + s32 status; + u32 reg_val; + + /* iXFI is only supported with X552 */ + if (mac->type != ixgbe_mac_X550EM_x) + return IXGBE_ERR_LINK_SETUP; + + /* Disable AN and force speed to 10G Serial. */ + status = ixgbe_read_iosf_sb_reg_x550(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + if (status) + return status; + + reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE; + reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK; + + /* Select forced link speed for internal PHY. */ + switch (*speed) { + case IXGBE_LINK_SPEED_10GB_FULL: + reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G; + break; + case IXGBE_LINK_SPEED_1GB_FULL: + reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G; + break; + default: + /* Other link speeds are not supported by internal KR PHY. */ + return IXGBE_ERR_LINK_SETUP; + } + + status = ixgbe_write_iosf_sb_reg_x550(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + if (status) + return status; + + /* Additional configuration needed for x550em_x */ + if (hw->mac.type == ixgbe_mac_X550EM_x) { + status = ixgbe_setup_ixfi_x550em_x(hw); + if (status) + return status; + } + + /* Toggle port SW reset by AN reset. */ + status = ixgbe_restart_an_internal_phy_x550em(hw); + + return status; +} + +/** + * ixgbe_supported_sfp_modules_X550em - Check if SFP module type is supported + * @hw: pointer to hardware structure + * @linear: true if SFP module is linear + */ +static s32 ixgbe_supported_sfp_modules_X550em(struct ixgbe_hw *hw, bool *linear) +{ + switch (hw->phy.sfp_type) { + case ixgbe_sfp_type_not_present: + return IXGBE_ERR_SFP_NOT_PRESENT; + case ixgbe_sfp_type_da_cu_core0: + case ixgbe_sfp_type_da_cu_core1: + *linear = true; + break; + case ixgbe_sfp_type_srlr_core0: + case ixgbe_sfp_type_srlr_core1: + case ixgbe_sfp_type_da_act_lmt_core0: + case ixgbe_sfp_type_da_act_lmt_core1: + case ixgbe_sfp_type_1g_sx_core0: + case ixgbe_sfp_type_1g_sx_core1: + case ixgbe_sfp_type_1g_lx_core0: + case ixgbe_sfp_type_1g_lx_core1: + *linear = false; + break; + case ixgbe_sfp_type_unknown: + case ixgbe_sfp_type_1g_cu_core0: + case ixgbe_sfp_type_1g_cu_core1: + default: + return IXGBE_ERR_SFP_NOT_SUPPORTED; + } + + return 0; +} + +/** + * ixgbe_setup_mac_link_sfp_x550em - Configure the KR PHY for SFP. + * @hw: pointer to hardware structure + * @speed: the link speed to force + * @autoneg_wait_to_complete: unused + * + * Configures the extern PHY and the integrated KR PHY for SFP support. + */ +static s32 +ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + __always_unused bool autoneg_wait_to_complete) +{ + s32 status; + u16 reg_slice, reg_val; + bool setup_linear = false; + + /* Check if SFP module is supported and linear */ + status = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear); + + /* If no SFP module present, then return success. Return success since + * there is no reason to configure CS4227 and SFP not present error is + * not accepted in the setup MAC link flow. + */ + if (status == IXGBE_ERR_SFP_NOT_PRESENT) + return 0; + + if (status) + return status; + + /* Configure internal PHY for KR/KX. */ + ixgbe_setup_kr_speed_x550em(hw, speed); + + /* Configure CS4227 LINE side to proper mode. */ + reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB + (hw->bus.lan_id << 12); + if (setup_linear) + reg_val = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1; + else + reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1; + + status = hw->link.ops.write_link(hw, hw->link.addr, reg_slice, + reg_val); + + return status; +} + +/** + * ixgbe_setup_sfi_x550a - Configure the internal PHY for native SFI mode + * @hw: pointer to hardware structure + * @speed: the link speed to force + * + * Configures the integrated PHY for native SFI mode. Used to connect the + * internal PHY directly to an SFP cage, without autonegotiation. + **/ +static s32 ixgbe_setup_sfi_x550a(struct ixgbe_hw *hw, ixgbe_link_speed *speed) +{ + struct ixgbe_mac_info *mac = &hw->mac; + s32 status; + u32 reg_val; + + /* Disable all AN and force speed to 10G Serial. */ + status = mac->ops.read_iosf_sb_reg(hw, + IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + if (status) + return status; + + reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN_EN; + reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN37_EN; + reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SGMII_EN; + reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_MASK; + + /* Select forced link speed for internal PHY. */ + switch (*speed) { + case IXGBE_LINK_SPEED_10GB_FULL: + reg_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_10G; + break; + case IXGBE_LINK_SPEED_1GB_FULL: + reg_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_1G; + break; + default: + /* Other link speeds are not supported by internal PHY. */ + return IXGBE_ERR_LINK_SETUP; + } + + (void)mac->ops.write_iosf_sb_reg(hw, + IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + + /* change mode enforcement rules to hybrid */ + (void)mac->ops.read_iosf_sb_reg(hw, + IXGBE_KRM_FLX_TMRS_CTRL_ST31(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + reg_val |= 0x0400; + + (void)mac->ops.write_iosf_sb_reg(hw, + IXGBE_KRM_FLX_TMRS_CTRL_ST31(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + + /* manually control the config */ + (void)mac->ops.read_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + reg_val |= 0x20002240; + + (void)mac->ops.write_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + + /* move the AN base page values */ + (void)mac->ops.read_iosf_sb_reg(hw, + IXGBE_KRM_PCS_KX_AN(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + reg_val |= 0x1; + + (void)mac->ops.write_iosf_sb_reg(hw, + IXGBE_KRM_PCS_KX_AN(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + + /* set the AN37 over CB mode */ + (void)mac->ops.read_iosf_sb_reg(hw, + IXGBE_KRM_AN_CNTL_4(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + reg_val |= 0x20000000; + + (void)mac->ops.write_iosf_sb_reg(hw, + IXGBE_KRM_AN_CNTL_4(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + + /* restart AN manually */ + (void)mac->ops.read_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART; + + (void)mac->ops.write_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + + /* Toggle port SW reset by AN reset. */ + status = ixgbe_restart_an_internal_phy_x550em(hw); + + return status; +} + +/** + * ixgbe_setup_mac_link_sfp_n - Setup internal PHY for native SFP + * @hw: pointer to hardware structure + * @speed: link speed + * @autoneg_wait_to_complete: unused + * + * Configure the integrated PHY for native SFP support. + */ +static s32 +ixgbe_setup_mac_link_sfp_n(struct ixgbe_hw *hw, ixgbe_link_speed speed, + __always_unused bool autoneg_wait_to_complete) +{ + bool setup_linear = false; + u32 reg_phy_int; + s32 ret_val; + + /* Check if SFP module is supported and linear */ + ret_val = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear); + + /* If no SFP module present, then return success. Return success since + * SFP not present error is not excepted in the setup MAC link flow. + */ + if (ret_val == IXGBE_ERR_SFP_NOT_PRESENT) + return 0; + + if (ret_val) + return ret_val; + + /* Configure internal PHY for native SFI based on module type */ + ret_val = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_phy_int); + if (ret_val) + return ret_val; + + reg_phy_int &= IXGBE_KRM_PMD_FLX_MASK_ST20_SFI_10G_DA; + if (!setup_linear) + reg_phy_int |= IXGBE_KRM_PMD_FLX_MASK_ST20_SFI_10G_SR; + + ret_val = hw->mac.ops.write_iosf_sb_reg(hw, + IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_phy_int); + if (ret_val) + return ret_val; + + /* Setup SFI internal link. */ + return ixgbe_setup_sfi_x550a(hw, &speed); +} + +/** + * ixgbe_setup_mac_link_sfp_x550a - Setup internal PHY for SFP + * @hw: pointer to hardware structure + * @speed: link speed + * @autoneg_wait_to_complete: unused + * + * Configure the integrated PHY for SFP support. + */ +static s32 +ixgbe_setup_mac_link_sfp_x550a(struct ixgbe_hw *hw, ixgbe_link_speed speed, + __always_unused bool autoneg_wait_to_complete) +{ + u32 reg_slice, slice_offset; + bool setup_linear = false; + u16 reg_phy_ext; + s32 ret_val; + + /* Check if SFP module is supported and linear */ + ret_val = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear); + + /* If no SFP module present, then return success. Return success since + * SFP not present error is not excepted in the setup MAC link flow. + */ + if (ret_val == IXGBE_ERR_SFP_NOT_PRESENT) + return 0; + + if (ret_val) + return ret_val; + + /* Configure internal PHY for KR/KX. */ + ixgbe_setup_kr_speed_x550em(hw, speed); + + if (hw->phy.mdio.prtad == MDIO_PRTAD_NONE) + return IXGBE_ERR_PHY_ADDR_INVALID; + + /* Get external PHY SKU id */ + ret_val = hw->phy.ops.read_reg(hw, IXGBE_CS4227_EFUSE_PDF_SKU, + IXGBE_MDIO_ZERO_DEV_TYPE, ®_phy_ext); + if (ret_val) + return ret_val; + + /* When configuring quad port CS4223, the MAC instance is part + * of the slice offset. + */ + if (reg_phy_ext == IXGBE_CS4223_SKU_ID) + slice_offset = (hw->bus.lan_id + + (hw->bus.instance_id << 1)) << 12; + else + slice_offset = hw->bus.lan_id << 12; + + /* Configure CS4227/CS4223 LINE side to proper mode. */ + reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB + slice_offset; + + ret_val = hw->phy.ops.read_reg(hw, reg_slice, + IXGBE_MDIO_ZERO_DEV_TYPE, ®_phy_ext); + if (ret_val) + return ret_val; + + reg_phy_ext &= ~((IXGBE_CS4227_EDC_MODE_CX1 << 1) | + (IXGBE_CS4227_EDC_MODE_SR << 1)); + + if (setup_linear) + reg_phy_ext |= (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 1; + else + reg_phy_ext |= (IXGBE_CS4227_EDC_MODE_SR << 1) | 1; + + ret_val = hw->phy.ops.write_reg(hw, reg_slice, + IXGBE_MDIO_ZERO_DEV_TYPE, reg_phy_ext); + if (ret_val) + return ret_val; + + /* Flush previous write with a read */ + return hw->phy.ops.read_reg(hw, reg_slice, + IXGBE_MDIO_ZERO_DEV_TYPE, ®_phy_ext); +} + +/** + * ixgbe_setup_mac_link_t_X550em - Sets the auto advertised link speed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg_wait: true when waiting for completion is needed + * + * Setup internal/external PHY link speed based on link speed, then set + * external PHY auto advertised link speed. + * + * Returns error status for any failure + **/ +static s32 ixgbe_setup_mac_link_t_X550em(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg_wait) +{ + s32 status; + ixgbe_link_speed force_speed; + + /* Setup internal/external PHY link speed to iXFI (10G), unless + * only 1G is auto advertised then setup KX link. + */ + if (speed & IXGBE_LINK_SPEED_10GB_FULL) + force_speed = IXGBE_LINK_SPEED_10GB_FULL; + else + force_speed = IXGBE_LINK_SPEED_1GB_FULL; + + /* If X552 and internal link mode is XFI, then setup XFI internal link. + */ + if (hw->mac.type == ixgbe_mac_X550EM_x && + !(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) { + status = ixgbe_setup_ixfi_x550em(hw, &force_speed); + + if (status) + return status; + } + + return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait); +} + +/** ixgbe_check_link_t_X550em - Determine link and speed status + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @link_up: true when link is up + * @link_up_wait_to_complete: bool used to wait for link up or not + * + * Check that both the MAC and X557 external PHY have link. + **/ +static s32 ixgbe_check_link_t_X550em(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *link_up, + bool link_up_wait_to_complete) +{ + u32 status; + u16 i, autoneg_status; + + if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper) + return IXGBE_ERR_CONFIG; + + status = ixgbe_check_mac_link_generic(hw, speed, link_up, + link_up_wait_to_complete); + + /* If check link fails or MAC link is not up, then return */ + if (status || !(*link_up)) + return status; + + /* MAC link is up, so check external PHY link. + * Link status is latching low, and can only be used to detect link + * drop, and not the current status of the link without performing + * back-to-back reads. + */ + for (i = 0; i < 2; i++) { + status = hw->phy.ops.read_reg(hw, MDIO_STAT1, MDIO_MMD_AN, + &autoneg_status); + + if (status) + return status; + } + + /* If external PHY link is not up, then indicate link not up */ + if (!(autoneg_status & IXGBE_MDIO_AUTO_NEG_LINK_STATUS)) + *link_up = false; + + return 0; +} + +/** + * ixgbe_setup_sgmii - Set up link for sgmii + * @hw: pointer to hardware structure + * @speed: unused + * @autoneg_wait_to_complete: unused + */ +static s32 +ixgbe_setup_sgmii(struct ixgbe_hw *hw, __always_unused ixgbe_link_speed speed, + __always_unused bool autoneg_wait_to_complete) +{ + struct ixgbe_mac_info *mac = &hw->mac; + u32 lval, sval, flx_val; + s32 rc; + + rc = mac->ops.read_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &lval); + if (rc) + return rc; + + lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE; + lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK; + lval |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_SGMII_EN; + lval |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CLAUSE_37_EN; + lval |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G; + rc = mac->ops.write_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, lval); + if (rc) + return rc; + + rc = mac->ops.read_iosf_sb_reg(hw, + IXGBE_KRM_SGMII_CTRL(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &sval); + if (rc) + return rc; + + sval |= IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_10_D; + sval |= IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_100_D; + rc = mac->ops.write_iosf_sb_reg(hw, + IXGBE_KRM_SGMII_CTRL(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, sval); + if (rc) + return rc; + + rc = mac->ops.read_iosf_sb_reg(hw, + IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &flx_val); + if (rc) + return rc; + + rc = mac->ops.read_iosf_sb_reg(hw, + IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &flx_val); + if (rc) + return rc; + + flx_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_MASK; + flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_1G; + flx_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN_EN; + flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SGMII_EN; + flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_AN37_EN; + + rc = mac->ops.write_iosf_sb_reg(hw, + IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, flx_val); + if (rc) + return rc; + + rc = ixgbe_restart_an_internal_phy_x550em(hw); + return rc; +} + +/** + * ixgbe_setup_sgmii_fw - Set up link for sgmii with firmware-controlled PHYs + * @hw: pointer to hardware structure + * @speed: the link speed to force + * @autoneg_wait: true when waiting for completion is needed + */ +static s32 ixgbe_setup_sgmii_fw(struct ixgbe_hw *hw, ixgbe_link_speed speed, + bool autoneg_wait) +{ + struct ixgbe_mac_info *mac = &hw->mac; + u32 lval, sval, flx_val; + s32 rc; + + rc = mac->ops.read_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &lval); + if (rc) + return rc; + + lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE; + lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK; + lval |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_SGMII_EN; + lval |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CLAUSE_37_EN; + lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G; + rc = mac->ops.write_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, lval); + if (rc) + return rc; + + rc = mac->ops.read_iosf_sb_reg(hw, + IXGBE_KRM_SGMII_CTRL(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &sval); + if (rc) + return rc; + + sval &= ~IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_10_D; + sval &= ~IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_100_D; + rc = mac->ops.write_iosf_sb_reg(hw, + IXGBE_KRM_SGMII_CTRL(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, sval); + if (rc) + return rc; + + rc = mac->ops.write_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, lval); + if (rc) + return rc; + + rc = mac->ops.read_iosf_sb_reg(hw, + IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &flx_val); + if (rc) + return rc; + + flx_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_MASK; + flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_AN; + flx_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN_EN; + flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SGMII_EN; + flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_AN37_EN; + + rc = mac->ops.write_iosf_sb_reg(hw, + IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, flx_val); + if (rc) + return rc; + + ixgbe_restart_an_internal_phy_x550em(hw); + + return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait); +} + +/** + * ixgbe_fc_autoneg_sgmii_x550em_a - Enable flow control IEEE clause 37 + * @hw: pointer to hardware structure + * + * Enable flow control according to IEEE clause 37. + */ +static void ixgbe_fc_autoneg_sgmii_x550em_a(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_ERR_FC_NOT_NEGOTIATED; + u32 info[FW_PHY_ACT_DATA_COUNT] = { 0 }; + ixgbe_link_speed speed; + bool link_up; + + /* AN should have completed when the cable was plugged in. + * Look for reasons to bail out. Bail out if: + * - FC autoneg is disabled, or if + * - link is not up. + */ + if (hw->fc.disable_fc_autoneg) + goto out; + + hw->mac.ops.check_link(hw, &speed, &link_up, false); + if (!link_up) + goto out; + + /* Check if auto-negotiation has completed */ + status = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_GET_LINK_INFO, &info); + if (status || !(info[0] & FW_PHY_ACT_GET_LINK_INFO_AN_COMPLETE)) { + status = IXGBE_ERR_FC_NOT_NEGOTIATED; + goto out; + } + + /* Negotiate the flow control */ + status = ixgbe_negotiate_fc(hw, info[0], info[0], + FW_PHY_ACT_GET_LINK_INFO_FC_RX, + FW_PHY_ACT_GET_LINK_INFO_FC_TX, + FW_PHY_ACT_GET_LINK_INFO_LP_FC_RX, + FW_PHY_ACT_GET_LINK_INFO_LP_FC_TX); + +out: + if (!status) { + hw->fc.fc_was_autonegged = true; + } else { + hw->fc.fc_was_autonegged = false; + hw->fc.current_mode = hw->fc.requested_mode; + } +} + +/** ixgbe_init_mac_link_ops_X550em_a - Init mac link function pointers + * @hw: pointer to hardware structure + **/ +static void ixgbe_init_mac_link_ops_X550em_a(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + + switch (mac->ops.get_media_type(hw)) { + case ixgbe_media_type_fiber: + mac->ops.setup_fc = NULL; + mac->ops.fc_autoneg = ixgbe_fc_autoneg_fiber_x550em_a; + break; + case ixgbe_media_type_copper: + if (hw->device_id != IXGBE_DEV_ID_X550EM_A_1G_T && + hw->device_id != IXGBE_DEV_ID_X550EM_A_1G_T_L) { + mac->ops.setup_link = ixgbe_setup_mac_link_t_X550em; + break; + } + mac->ops.fc_autoneg = ixgbe_fc_autoneg_sgmii_x550em_a; + mac->ops.setup_fc = ixgbe_fc_autoneg_fw; + mac->ops.setup_link = ixgbe_setup_sgmii_fw; + mac->ops.check_link = ixgbe_check_mac_link_generic; + break; + case ixgbe_media_type_backplane: + mac->ops.fc_autoneg = ixgbe_fc_autoneg_backplane_x550em_a; + mac->ops.setup_fc = ixgbe_setup_fc_backplane_x550em_a; + break; + default: + break; + } +} + +/** ixgbe_init_mac_link_ops_X550em - init mac link function pointers + * @hw: pointer to hardware structure + **/ +static void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + + mac->ops.setup_fc = ixgbe_setup_fc_x550em; + + switch (mac->ops.get_media_type(hw)) { + case ixgbe_media_type_fiber: + /* CS4227 does not support autoneg, so disable the laser control + * functions for SFP+ fiber + */ + mac->ops.disable_tx_laser = NULL; + mac->ops.enable_tx_laser = NULL; + mac->ops.flap_tx_laser = NULL; + mac->ops.setup_link = ixgbe_setup_mac_link_multispeed_fiber; + switch (hw->device_id) { + case IXGBE_DEV_ID_X550EM_A_SFP_N: + mac->ops.setup_mac_link = ixgbe_setup_mac_link_sfp_n; + break; + case IXGBE_DEV_ID_X550EM_A_SFP: + mac->ops.setup_mac_link = + ixgbe_setup_mac_link_sfp_x550a; + break; + default: + mac->ops.setup_mac_link = + ixgbe_setup_mac_link_sfp_x550em; + break; + } + mac->ops.set_rate_select_speed = + ixgbe_set_soft_rate_select_speed; + break; + case ixgbe_media_type_copper: + if (hw->device_id == IXGBE_DEV_ID_X550EM_X_1G_T) + break; + mac->ops.setup_link = ixgbe_setup_mac_link_t_X550em; + mac->ops.setup_fc = ixgbe_setup_fc_generic; + mac->ops.check_link = ixgbe_check_link_t_X550em; + break; + case ixgbe_media_type_backplane: + if (hw->device_id == IXGBE_DEV_ID_X550EM_A_SGMII || + hw->device_id == IXGBE_DEV_ID_X550EM_A_SGMII_L) + mac->ops.setup_link = ixgbe_setup_sgmii; + break; + default: + break; + } + + /* Additional modification for X550em_a devices */ + if (hw->mac.type == ixgbe_mac_x550em_a) + ixgbe_init_mac_link_ops_X550em_a(hw); +} + +/** ixgbe_setup_sfp_modules_X550em - Setup SFP module + * @hw: pointer to hardware structure + */ +static s32 ixgbe_setup_sfp_modules_X550em(struct ixgbe_hw *hw) +{ + s32 status; + bool linear; + + /* Check if SFP module is supported */ + status = ixgbe_supported_sfp_modules_X550em(hw, &linear); + if (status) + return status; + + ixgbe_init_mac_link_ops_X550em(hw); + hw->phy.ops.reset = NULL; + + return 0; +} + +/** ixgbe_get_link_capabilities_x550em - Determines link capabilities + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @autoneg: true when autoneg or autotry is enabled + **/ +static s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *autoneg) +{ + if (hw->phy.type == ixgbe_phy_fw) { + *autoneg = true; + *speed = hw->phy.speeds_supported; + return 0; + } + + /* SFP */ + if (hw->phy.media_type == ixgbe_media_type_fiber) { + /* CS4227 SFP must not enable auto-negotiation */ + *autoneg = false; + + if (hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1) { + *speed = IXGBE_LINK_SPEED_1GB_FULL; + return 0; + } + + /* Link capabilities are based on SFP */ + if (hw->phy.multispeed_fiber) + *speed = IXGBE_LINK_SPEED_10GB_FULL | + IXGBE_LINK_SPEED_1GB_FULL; + else + *speed = IXGBE_LINK_SPEED_10GB_FULL; + } else { + switch (hw->phy.type) { + case ixgbe_phy_x550em_kx4: + *speed = IXGBE_LINK_SPEED_1GB_FULL | + IXGBE_LINK_SPEED_2_5GB_FULL | + IXGBE_LINK_SPEED_10GB_FULL; + break; + case ixgbe_phy_x550em_xfi: + *speed = IXGBE_LINK_SPEED_1GB_FULL | + IXGBE_LINK_SPEED_10GB_FULL; + break; + case ixgbe_phy_ext_1g_t: + case ixgbe_phy_sgmii: + *speed = IXGBE_LINK_SPEED_1GB_FULL; + break; + case ixgbe_phy_x550em_kr: + if (hw->mac.type == ixgbe_mac_x550em_a) { + /* check different backplane modes */ + if (hw->phy.nw_mng_if_sel & + IXGBE_NW_MNG_IF_SEL_PHY_SPEED_2_5G) { + *speed = IXGBE_LINK_SPEED_2_5GB_FULL; + break; + } else if (hw->device_id == + IXGBE_DEV_ID_X550EM_A_KR_L) { + *speed = IXGBE_LINK_SPEED_1GB_FULL; + break; + } + } + fallthrough; + default: + *speed = IXGBE_LINK_SPEED_10GB_FULL | + IXGBE_LINK_SPEED_1GB_FULL; + break; + } + *autoneg = true; + } + return 0; +} + +/** + * ixgbe_get_lasi_ext_t_x550em - Determime external Base T PHY interrupt cause + * @hw: pointer to hardware structure + * @lsc: pointer to boolean flag which indicates whether external Base T + * PHY interrupt is lsc + * + * Determime if external Base T PHY interrupt cause is high temperature + * failure alarm or link status change. + * + * Return IXGBE_ERR_OVERTEMP if interrupt is high temperature + * failure alarm, else return PHY access status. + **/ +static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc) +{ + u32 status; + u16 reg; + + *lsc = false; + + /* Vendor alarm triggered */ + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_CHIP_STD_INT_FLAG, + MDIO_MMD_VEND1, + ®); + + if (status || !(reg & IXGBE_MDIO_GLOBAL_VEN_ALM_INT_EN)) + return status; + + /* Vendor Auto-Neg alarm triggered or Global alarm 1 triggered */ + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_FLAG, + MDIO_MMD_VEND1, + ®); + + if (status || !(reg & (IXGBE_MDIO_GLOBAL_AN_VEN_ALM_INT_EN | + IXGBE_MDIO_GLOBAL_ALARM_1_INT))) + return status; + + /* Global alarm triggered */ + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_ALARM_1, + MDIO_MMD_VEND1, + ®); + + if (status) + return status; + + /* If high temperature failure, then return over temp error and exit */ + if (reg & IXGBE_MDIO_GLOBAL_ALM_1_HI_TMP_FAIL) { + /* power down the PHY in case the PHY FW didn't already */ + ixgbe_set_copper_phy_power(hw, false); + return IXGBE_ERR_OVERTEMP; + } + if (reg & IXGBE_MDIO_GLOBAL_ALM_1_DEV_FAULT) { + /* device fault alarm triggered */ + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_FAULT_MSG, + MDIO_MMD_VEND1, + ®); + if (status) + return status; + + /* if device fault was due to high temp alarm handle and exit */ + if (reg == IXGBE_MDIO_GLOBAL_FAULT_MSG_HI_TMP) { + /* power down the PHY in case the PHY FW didn't */ + ixgbe_set_copper_phy_power(hw, false); + return IXGBE_ERR_OVERTEMP; + } + } + + /* Vendor alarm 2 triggered */ + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_CHIP_STD_INT_FLAG, + MDIO_MMD_AN, ®); + + if (status || !(reg & IXGBE_MDIO_GLOBAL_STD_ALM2_INT)) + return status; + + /* link connect/disconnect event occurred */ + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM2, + MDIO_MMD_AN, ®); + + if (status) + return status; + + /* Indicate LSC */ + if (reg & IXGBE_MDIO_AUTO_NEG_VEN_LSC) + *lsc = true; + + return 0; +} + +/** + * ixgbe_enable_lasi_ext_t_x550em - Enable external Base T PHY interrupts + * @hw: pointer to hardware structure + * + * Enable link status change and temperature failure alarm for the external + * Base T PHY + * + * Returns PHY access status + **/ +static s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw) +{ + u32 status; + u16 reg; + bool lsc; + + /* Clear interrupt flags */ + status = ixgbe_get_lasi_ext_t_x550em(hw, &lsc); + + /* Enable link status change alarm */ + + /* Enable the LASI interrupts on X552 devices to receive notifications + * of the link configurations of the external PHY and correspondingly + * support the configuration of the internal iXFI link, since iXFI does + * not support auto-negotiation. This is not required for X553 devices + * having KR support, which performs auto-negotiations and which is used + * as the internal link to the external PHY. Hence adding a check here + * to avoid enabling LASI interrupts for X553 devices. + */ + if (hw->mac.type != ixgbe_mac_x550em_a) { + status = hw->phy.ops.read_reg(hw, + IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK, + MDIO_MMD_AN, ®); + if (status) + return status; + + reg |= IXGBE_MDIO_PMA_TX_VEN_LASI_INT_EN; + + status = hw->phy.ops.write_reg(hw, + IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK, + MDIO_MMD_AN, reg); + if (status) + return status; + } + + /* Enable high temperature failure and global fault alarms */ + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK, + MDIO_MMD_VEND1, + ®); + if (status) + return status; + + reg |= (IXGBE_MDIO_GLOBAL_INT_HI_TEMP_EN | + IXGBE_MDIO_GLOBAL_INT_DEV_FAULT_EN); + + status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK, + MDIO_MMD_VEND1, + reg); + if (status) + return status; + + /* Enable vendor Auto-Neg alarm and Global Interrupt Mask 1 alarm */ + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_MASK, + MDIO_MMD_VEND1, + ®); + if (status) + return status; + + reg |= (IXGBE_MDIO_GLOBAL_AN_VEN_ALM_INT_EN | + IXGBE_MDIO_GLOBAL_ALARM_1_INT); + + status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_MASK, + MDIO_MMD_VEND1, + reg); + if (status) + return status; + + /* Enable chip-wide vendor alarm */ + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_STD_MASK, + MDIO_MMD_VEND1, + ®); + if (status) + return status; + + reg |= IXGBE_MDIO_GLOBAL_VEN_ALM_INT_EN; + + status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_STD_MASK, + MDIO_MMD_VEND1, + reg); + + return status; +} + +/** + * ixgbe_handle_lasi_ext_t_x550em - Handle external Base T PHY interrupt + * @hw: pointer to hardware structure + * + * Handle external Base T PHY interrupt. If high temperature + * failure alarm then return error, else if link status change + * then setup internal/external PHY link + * + * Return IXGBE_ERR_OVERTEMP if interrupt is high temperature + * failure alarm, else return PHY access status. + **/ +static s32 ixgbe_handle_lasi_ext_t_x550em(struct ixgbe_hw *hw) +{ + struct ixgbe_phy_info *phy = &hw->phy; + bool lsc; + u32 status; + + status = ixgbe_get_lasi_ext_t_x550em(hw, &lsc); + if (status) + return status; + + if (lsc && phy->ops.setup_internal_link) + return phy->ops.setup_internal_link(hw); + + return 0; +} + +/** + * ixgbe_setup_kr_speed_x550em - Configure the KR PHY for link speed. + * @hw: pointer to hardware structure + * @speed: link speed + * + * Configures the integrated KR PHY. + **/ +static s32 ixgbe_setup_kr_speed_x550em(struct ixgbe_hw *hw, + ixgbe_link_speed speed) +{ + s32 status; + u32 reg_val; + + status = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + if (status) + return status; + + reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE; + reg_val &= ~(IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR | + IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX); + + /* Advertise 10G support. */ + if (speed & IXGBE_LINK_SPEED_10GB_FULL) + reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR; + + /* Advertise 1G support. */ + if (speed & IXGBE_LINK_SPEED_1GB_FULL) + reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX; + + status = hw->mac.ops.write_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + + if (hw->mac.type == ixgbe_mac_x550em_a) { + /* Set lane mode to KR auto negotiation */ + status = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + + if (status) + return status; + + reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_MASK; + reg_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_AN; + reg_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_AN_EN; + reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN37_EN; + reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SGMII_EN; + + status = hw->mac.ops.write_iosf_sb_reg(hw, + IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + } + + return ixgbe_restart_an_internal_phy_x550em(hw); +} + +/** + * ixgbe_setup_kr_x550em - Configure the KR PHY + * @hw: pointer to hardware structure + **/ +static s32 ixgbe_setup_kr_x550em(struct ixgbe_hw *hw) +{ + /* leave link alone for 2.5G */ + if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_2_5GB_FULL) + return 0; + + if (ixgbe_check_reset_blocked(hw)) + return 0; + + return ixgbe_setup_kr_speed_x550em(hw, hw->phy.autoneg_advertised); +} + +/** ixgbe_ext_phy_t_x550em_get_link - Get ext phy link status + * @hw: address of hardware structure + * @link_up: address of boolean to indicate link status + * + * Returns error code if unable to get link status. + **/ +static s32 ixgbe_ext_phy_t_x550em_get_link(struct ixgbe_hw *hw, bool *link_up) +{ + u32 ret; + u16 autoneg_status; + + *link_up = false; + + /* read this twice back to back to indicate current status */ + ret = hw->phy.ops.read_reg(hw, MDIO_STAT1, MDIO_MMD_AN, + &autoneg_status); + if (ret) + return ret; + + ret = hw->phy.ops.read_reg(hw, MDIO_STAT1, MDIO_MMD_AN, + &autoneg_status); + if (ret) + return ret; + + *link_up = !!(autoneg_status & IXGBE_MDIO_AUTO_NEG_LINK_STATUS); + + return 0; +} + +/** ixgbe_setup_internal_phy_t_x550em - Configure KR PHY to X557 link + * @hw: point to hardware structure + * + * Configures the link between the integrated KR PHY and the external X557 PHY + * The driver will call this function when it gets a link status change + * interrupt from the X557 PHY. This function configures the link speed + * between the PHYs to match the link speed of the BASE-T link. + * + * A return of a non-zero value indicates an error, and the base driver should + * not report link up. + **/ +static s32 ixgbe_setup_internal_phy_t_x550em(struct ixgbe_hw *hw) +{ + ixgbe_link_speed force_speed; + bool link_up; + u32 status; + u16 speed; + + if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper) + return IXGBE_ERR_CONFIG; + + if (!(hw->mac.type == ixgbe_mac_X550EM_x && + !(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE))) { + speed = IXGBE_LINK_SPEED_10GB_FULL | + IXGBE_LINK_SPEED_1GB_FULL; + return ixgbe_setup_kr_speed_x550em(hw, speed); + } + + /* If link is not up, then there is no setup necessary so return */ + status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up); + if (status) + return status; + + if (!link_up) + return 0; + + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT, + MDIO_MMD_AN, + &speed); + if (status) + return status; + + /* If link is not still up, then no setup is necessary so return */ + status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up); + if (status) + return status; + + if (!link_up) + return 0; + + /* clear everything but the speed and duplex bits */ + speed &= IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_MASK; + + switch (speed) { + case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB_FULL: + force_speed = IXGBE_LINK_SPEED_10GB_FULL; + break; + case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB_FULL: + force_speed = IXGBE_LINK_SPEED_1GB_FULL; + break; + default: + /* Internal PHY does not support anything else */ + return IXGBE_ERR_INVALID_LINK_SETTINGS; + } + + return ixgbe_setup_ixfi_x550em(hw, &force_speed); +} + +/** ixgbe_reset_phy_t_X550em - Performs X557 PHY reset and enables LASI + * @hw: pointer to hardware structure + **/ +static s32 ixgbe_reset_phy_t_X550em(struct ixgbe_hw *hw) +{ + s32 status; + + status = ixgbe_reset_phy_generic(hw); + + if (status) + return status; + + /* Configure Link Status Alarm and Temperature Threshold interrupts */ + return ixgbe_enable_lasi_ext_t_x550em(hw); +} + +/** + * ixgbe_led_on_t_x550em - Turns on the software controllable LEDs. + * @hw: pointer to hardware structure + * @led_idx: led number to turn on + **/ +static s32 ixgbe_led_on_t_x550em(struct ixgbe_hw *hw, u32 led_idx) +{ + u16 phy_data; + + if (led_idx >= IXGBE_X557_MAX_LED_INDEX) + return IXGBE_ERR_PARAM; + + /* To turn on the LED, set mode to ON. */ + hw->phy.ops.read_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx, + MDIO_MMD_VEND1, &phy_data); + phy_data |= IXGBE_X557_LED_MANUAL_SET_MASK; + hw->phy.ops.write_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx, + MDIO_MMD_VEND1, phy_data); + + return 0; +} + +/** + * ixgbe_led_off_t_x550em - Turns off the software controllable LEDs. + * @hw: pointer to hardware structure + * @led_idx: led number to turn off + **/ +static s32 ixgbe_led_off_t_x550em(struct ixgbe_hw *hw, u32 led_idx) +{ + u16 phy_data; + + if (led_idx >= IXGBE_X557_MAX_LED_INDEX) + return IXGBE_ERR_PARAM; + + /* To turn on the LED, set mode to ON. */ + hw->phy.ops.read_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx, + MDIO_MMD_VEND1, &phy_data); + phy_data &= ~IXGBE_X557_LED_MANUAL_SET_MASK; + hw->phy.ops.write_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx, + MDIO_MMD_VEND1, phy_data); + + return 0; +} + +/** + * ixgbe_set_fw_drv_ver_x550 - Sends driver version to firmware + * @hw: pointer to the HW structure + * @maj: driver version major number + * @min: driver version minor number + * @build: driver version build number + * @sub: driver version sub build number + * @len: length of driver_ver string + * @driver_ver: driver string + * + * Sends driver version number to firmware through the manageability + * block. On success return 0 + * else returns IXGBE_ERR_SWFW_SYNC when encountering an error acquiring + * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails. + **/ +static s32 ixgbe_set_fw_drv_ver_x550(struct ixgbe_hw *hw, u8 maj, u8 min, + u8 build, u8 sub, u16 len, + const char *driver_ver) +{ + struct ixgbe_hic_drv_info2 fw_cmd; + s32 ret_val; + int i; + + if (!len || !driver_ver || (len > sizeof(fw_cmd.driver_string))) + return IXGBE_ERR_INVALID_ARGUMENT; + + fw_cmd.hdr.cmd = FW_CEM_CMD_DRIVER_INFO; + fw_cmd.hdr.buf_len = FW_CEM_CMD_DRIVER_INFO_LEN + len; + fw_cmd.hdr.cmd_or_resp.cmd_resv = FW_CEM_CMD_RESERVED; + fw_cmd.port_num = (u8)hw->bus.func; + fw_cmd.ver_maj = maj; + fw_cmd.ver_min = min; + fw_cmd.ver_build = build; + fw_cmd.ver_sub = sub; + fw_cmd.hdr.checksum = 0; + memcpy(fw_cmd.driver_string, driver_ver, len); + fw_cmd.hdr.checksum = ixgbe_calculate_checksum((u8 *)&fw_cmd, + (FW_CEM_HDR_LEN + fw_cmd.hdr.buf_len)); + + for (i = 0; i <= FW_CEM_MAX_RETRIES; i++) { + ret_val = ixgbe_host_interface_command(hw, (u32 *)&fw_cmd, + sizeof(fw_cmd), + IXGBE_HI_COMMAND_TIMEOUT, + true); + if (ret_val) + continue; + + if (fw_cmd.hdr.cmd_or_resp.ret_status != + FW_CEM_RESP_STATUS_SUCCESS) + return IXGBE_ERR_HOST_INTERFACE_COMMAND; + return 0; + } + + return ret_val; +} + +/** ixgbe_get_lcd_x550em - Determine lowest common denominator + * @hw: pointer to hardware structure + * @lcd_speed: pointer to lowest common link speed + * + * Determine lowest common link speed with link partner. + **/ +static s32 ixgbe_get_lcd_t_x550em(struct ixgbe_hw *hw, + ixgbe_link_speed *lcd_speed) +{ + u16 an_lp_status; + s32 status; + u16 word = hw->eeprom.ctrl_word_3; + + *lcd_speed = IXGBE_LINK_SPEED_UNKNOWN; + + status = hw->phy.ops.read_reg(hw, IXGBE_AUTO_NEG_LP_STATUS, + MDIO_MMD_AN, + &an_lp_status); + if (status) + return status; + + /* If link partner advertised 1G, return 1G */ + if (an_lp_status & IXGBE_AUTO_NEG_LP_1000BASE_CAP) { + *lcd_speed = IXGBE_LINK_SPEED_1GB_FULL; + return status; + } + + /* If 10G disabled for LPLU via NVM D10GMP, then return no valid LCD */ + if ((hw->bus.lan_id && (word & NVM_INIT_CTRL_3_D10GMP_PORT1)) || + (word & NVM_INIT_CTRL_3_D10GMP_PORT0)) + return status; + + /* Link partner not capable of lower speeds, return 10G */ + *lcd_speed = IXGBE_LINK_SPEED_10GB_FULL; + return status; +} + +/** + * ixgbe_setup_fc_x550em - Set up flow control + * @hw: pointer to hardware structure + */ +static s32 ixgbe_setup_fc_x550em(struct ixgbe_hw *hw) +{ + bool pause, asm_dir; + u32 reg_val; + s32 rc = 0; + + /* Validate the requested mode */ + if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) { + hw_err(hw, "ixgbe_fc_rx_pause not valid in strict IEEE mode\n"); + return IXGBE_ERR_INVALID_LINK_SETTINGS; + } + + /* 10gig parts do not have a word in the EEPROM to determine the + * default flow control setting, so we explicitly set it to full. + */ + if (hw->fc.requested_mode == ixgbe_fc_default) + hw->fc.requested_mode = ixgbe_fc_full; + + /* Determine PAUSE and ASM_DIR bits. */ + switch (hw->fc.requested_mode) { + case ixgbe_fc_none: + pause = false; + asm_dir = false; + break; + case ixgbe_fc_tx_pause: + pause = false; + asm_dir = true; + break; + case ixgbe_fc_rx_pause: + /* Rx Flow control is enabled and Tx Flow control is + * disabled by software override. Since there really + * isn't a way to advertise that we are capable of RX + * Pause ONLY, we will advertise that we support both + * symmetric and asymmetric Rx PAUSE, as such we fall + * through to the fc_full statement. Later, we will + * disable the adapter's ability to send PAUSE frames. + */ + fallthrough; + case ixgbe_fc_full: + pause = true; + asm_dir = true; + break; + default: + hw_err(hw, "Flow control param set incorrectly\n"); + return IXGBE_ERR_CONFIG; + } + + switch (hw->device_id) { + case IXGBE_DEV_ID_X550EM_X_KR: + case IXGBE_DEV_ID_X550EM_A_KR: + case IXGBE_DEV_ID_X550EM_A_KR_L: + rc = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, + ®_val); + if (rc) + return rc; + + reg_val &= ~(IXGBE_KRM_AN_CNTL_1_SYM_PAUSE | + IXGBE_KRM_AN_CNTL_1_ASM_PAUSE); + if (pause) + reg_val |= IXGBE_KRM_AN_CNTL_1_SYM_PAUSE; + if (asm_dir) + reg_val |= IXGBE_KRM_AN_CNTL_1_ASM_PAUSE; + rc = hw->mac.ops.write_iosf_sb_reg(hw, + IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, + reg_val); + + /* This device does not fully support AN. */ + hw->fc.disable_fc_autoneg = true; + break; + case IXGBE_DEV_ID_X550EM_X_XFI: + hw->fc.disable_fc_autoneg = true; + break; + default: + break; + } + return rc; +} + +/** + * ixgbe_fc_autoneg_backplane_x550em_a - Enable flow control IEEE clause 37 + * @hw: pointer to hardware structure + **/ +static void ixgbe_fc_autoneg_backplane_x550em_a(struct ixgbe_hw *hw) +{ + u32 link_s1, lp_an_page_low, an_cntl_1; + s32 status = IXGBE_ERR_FC_NOT_NEGOTIATED; + ixgbe_link_speed speed; + bool link_up; + + /* AN should have completed when the cable was plugged in. + * Look for reasons to bail out. Bail out if: + * - FC autoneg is disabled, or if + * - link is not up. + */ + if (hw->fc.disable_fc_autoneg) { + hw_err(hw, "Flow control autoneg is disabled"); + goto out; + } + + hw->mac.ops.check_link(hw, &speed, &link_up, false); + if (!link_up) { + hw_err(hw, "The link is down"); + goto out; + } + + /* Check at auto-negotiation has completed */ + status = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_LINK_S1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &link_s1); + + if (status || (link_s1 & IXGBE_KRM_LINK_S1_MAC_AN_COMPLETE) == 0) { + hw_dbg(hw, "Auto-Negotiation did not complete\n"); + status = IXGBE_ERR_FC_NOT_NEGOTIATED; + goto out; + } + + /* Read the 10g AN autoc and LP ability registers and resolve + * local flow control settings accordingly + */ + status = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &an_cntl_1); + + if (status) { + hw_dbg(hw, "Auto-Negotiation did not complete\n"); + goto out; + } + + status = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_LP_BASE_PAGE_HIGH(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &lp_an_page_low); + + if (status) { + hw_dbg(hw, "Auto-Negotiation did not complete\n"); + goto out; + } + + status = ixgbe_negotiate_fc(hw, an_cntl_1, lp_an_page_low, + IXGBE_KRM_AN_CNTL_1_SYM_PAUSE, + IXGBE_KRM_AN_CNTL_1_ASM_PAUSE, + IXGBE_KRM_LP_BASE_PAGE_HIGH_SYM_PAUSE, + IXGBE_KRM_LP_BASE_PAGE_HIGH_ASM_PAUSE); + +out: + if (!status) { + hw->fc.fc_was_autonegged = true; + } else { + hw->fc.fc_was_autonegged = false; + hw->fc.current_mode = hw->fc.requested_mode; + } +} + +/** + * ixgbe_fc_autoneg_fiber_x550em_a - passthrough FC settings + * @hw: pointer to hardware structure + **/ +static void ixgbe_fc_autoneg_fiber_x550em_a(struct ixgbe_hw *hw) +{ + hw->fc.fc_was_autonegged = false; + hw->fc.current_mode = hw->fc.requested_mode; +} + +/** ixgbe_enter_lplu_x550em - Transition to low power states + * @hw: pointer to hardware structure + * + * Configures Low Power Link Up on transition to low power states + * (from D0 to non-D0). Link is required to enter LPLU so avoid resetting + * the X557 PHY immediately prior to entering LPLU. + **/ +static s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw) +{ + u16 an_10g_cntl_reg, autoneg_reg, speed; + s32 status; + ixgbe_link_speed lcd_speed; + u32 save_autoneg; + bool link_up; + + /* If blocked by MNG FW, then don't restart AN */ + if (ixgbe_check_reset_blocked(hw)) + return 0; + + status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up); + if (status) + return status; + + status = hw->eeprom.ops.read(hw, NVM_INIT_CTRL_3, + &hw->eeprom.ctrl_word_3); + if (status) + return status; + + /* If link is down, LPLU disabled in NVM, WoL disabled, or + * manageability disabled, then force link down by entering + * low power mode. + */ + if (!link_up || !(hw->eeprom.ctrl_word_3 & NVM_INIT_CTRL_3_LPLU) || + !(hw->wol_enabled || ixgbe_mng_present(hw))) + return ixgbe_set_copper_phy_power(hw, false); + + /* Determine LCD */ + status = ixgbe_get_lcd_t_x550em(hw, &lcd_speed); + if (status) + return status; + + /* If no valid LCD link speed, then force link down and exit. */ + if (lcd_speed == IXGBE_LINK_SPEED_UNKNOWN) + return ixgbe_set_copper_phy_power(hw, false); + + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT, + MDIO_MMD_AN, + &speed); + if (status) + return status; + + /* If no link now, speed is invalid so take link down */ + status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up); + if (status) + return ixgbe_set_copper_phy_power(hw, false); + + /* clear everything but the speed bits */ + speed &= IXGBE_MDIO_AUTO_NEG_VEN_STAT_SPEED_MASK; + + /* If current speed is already LCD, then exit. */ + if (((speed == IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB) && + (lcd_speed == IXGBE_LINK_SPEED_1GB_FULL)) || + ((speed == IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB) && + (lcd_speed == IXGBE_LINK_SPEED_10GB_FULL))) + return status; + + /* Clear AN completed indication */ + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM, + MDIO_MMD_AN, + &autoneg_reg); + if (status) + return status; + + status = hw->phy.ops.read_reg(hw, MDIO_AN_10GBT_CTRL, + MDIO_MMD_AN, + &an_10g_cntl_reg); + if (status) + return status; + + status = hw->phy.ops.read_reg(hw, + IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG, + MDIO_MMD_AN, + &autoneg_reg); + if (status) + return status; + + save_autoneg = hw->phy.autoneg_advertised; + + /* Setup link at least common link speed */ + status = hw->mac.ops.setup_link(hw, lcd_speed, false); + + /* restore autoneg from before setting lplu speed */ + hw->phy.autoneg_advertised = save_autoneg; + + return status; +} + +/** + * ixgbe_reset_phy_fw - Reset firmware-controlled PHYs + * @hw: pointer to hardware structure + */ +static s32 ixgbe_reset_phy_fw(struct ixgbe_hw *hw) +{ + u32 store[FW_PHY_ACT_DATA_COUNT] = { 0 }; + s32 rc; + + if (hw->phy.reset_disable || ixgbe_check_reset_blocked(hw)) + return 0; + + rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_PHY_SW_RESET, &store); + if (rc) + return rc; + memset(store, 0, sizeof(store)); + + rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_INIT_PHY, &store); + if (rc) + return rc; + + return ixgbe_setup_fw_link(hw); +} + +/** + * ixgbe_check_overtemp_fw - Check firmware-controlled PHYs for overtemp + * @hw: pointer to hardware structure + */ +static s32 ixgbe_check_overtemp_fw(struct ixgbe_hw *hw) +{ + u32 store[FW_PHY_ACT_DATA_COUNT] = { 0 }; + s32 rc; + + rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_GET_LINK_INFO, &store); + if (rc) + return rc; + + if (store[0] & FW_PHY_ACT_GET_LINK_INFO_TEMP) { + ixgbe_shutdown_fw_phy(hw); + return IXGBE_ERR_OVERTEMP; + } + return 0; +} + +/** + * ixgbe_read_mng_if_sel_x550em - Read NW_MNG_IF_SEL register + * @hw: pointer to hardware structure + * + * Read NW_MNG_IF_SEL register and save field values. + */ +static void ixgbe_read_mng_if_sel_x550em(struct ixgbe_hw *hw) +{ + /* Save NW management interface connected on board. This is used + * to determine internal PHY mode. + */ + hw->phy.nw_mng_if_sel = IXGBE_READ_REG(hw, IXGBE_NW_MNG_IF_SEL); + + /* If X552 (X550EM_a) and MDIO is connected to external PHY, then set + * PHY address. This register field was has only been used for X552. + */ + if (hw->mac.type == ixgbe_mac_x550em_a && + hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_MDIO_ACT) { + hw->phy.mdio.prtad = (hw->phy.nw_mng_if_sel & + IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD) >> + IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD_SHIFT; + } +} + +/** ixgbe_init_phy_ops_X550em - PHY/SFP specific init + * @hw: pointer to hardware structure + * + * Initialize any function pointers that were not able to be + * set during init_shared_code because the PHY/SFP type was + * not known. Perform the SFP init if necessary. + **/ +static s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw) +{ + struct ixgbe_phy_info *phy = &hw->phy; + s32 ret_val; + + hw->mac.ops.set_lan_id(hw); + + ixgbe_read_mng_if_sel_x550em(hw); + + if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) { + phy->phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM; + ixgbe_setup_mux_ctl(hw); + } + + /* Identify the PHY or SFP module */ + ret_val = phy->ops.identify(hw); + if (ret_val == IXGBE_ERR_SFP_NOT_SUPPORTED || + ret_val == IXGBE_ERR_PHY_ADDR_INVALID) + return ret_val; + + /* Setup function pointers based on detected hardware */ + ixgbe_init_mac_link_ops_X550em(hw); + if (phy->sfp_type != ixgbe_sfp_type_unknown) + phy->ops.reset = NULL; + + /* Set functions pointers based on phy type */ + switch (hw->phy.type) { + case ixgbe_phy_x550em_kx4: + phy->ops.setup_link = NULL; + phy->ops.read_reg = ixgbe_read_phy_reg_x550em; + phy->ops.write_reg = ixgbe_write_phy_reg_x550em; + break; + case ixgbe_phy_x550em_kr: + phy->ops.setup_link = ixgbe_setup_kr_x550em; + phy->ops.read_reg = ixgbe_read_phy_reg_x550em; + phy->ops.write_reg = ixgbe_write_phy_reg_x550em; + break; + case ixgbe_phy_x550em_xfi: + /* link is managed by HW */ + phy->ops.setup_link = NULL; + phy->ops.read_reg = ixgbe_read_phy_reg_x550em; + phy->ops.write_reg = ixgbe_write_phy_reg_x550em; + break; + case ixgbe_phy_x550em_ext_t: + /* Save NW management interface connected on board. This is used + * to determine internal PHY mode + */ + phy->nw_mng_if_sel = IXGBE_READ_REG(hw, IXGBE_NW_MNG_IF_SEL); + + /* If internal link mode is XFI, then setup iXFI internal link, + * else setup KR now. + */ + phy->ops.setup_internal_link = + ixgbe_setup_internal_phy_t_x550em; + + /* setup SW LPLU only for first revision */ + if (hw->mac.type == ixgbe_mac_X550EM_x && + !(IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0)) & + IXGBE_FUSES0_REV_MASK)) + phy->ops.enter_lplu = ixgbe_enter_lplu_t_x550em; + + phy->ops.handle_lasi = ixgbe_handle_lasi_ext_t_x550em; + phy->ops.reset = ixgbe_reset_phy_t_X550em; + break; + case ixgbe_phy_sgmii: + phy->ops.setup_link = NULL; + break; + case ixgbe_phy_fw: + phy->ops.setup_link = ixgbe_setup_fw_link; + phy->ops.reset = ixgbe_reset_phy_fw; + break; + case ixgbe_phy_ext_1g_t: + phy->ops.setup_link = NULL; + phy->ops.read_reg = NULL; + phy->ops.write_reg = NULL; + phy->ops.reset = NULL; + break; + default: + break; + } + + return ret_val; +} + +/** ixgbe_get_media_type_X550em - Get media type + * @hw: pointer to hardware structure + * + * Returns the media type (fiber, copper, backplane) + * + */ +static enum ixgbe_media_type ixgbe_get_media_type_X550em(struct ixgbe_hw *hw) +{ + enum ixgbe_media_type media_type; + + /* Detect if there is a copper PHY attached. */ + switch (hw->device_id) { + case IXGBE_DEV_ID_X550EM_A_SGMII: + case IXGBE_DEV_ID_X550EM_A_SGMII_L: + hw->phy.type = ixgbe_phy_sgmii; + fallthrough; + case IXGBE_DEV_ID_X550EM_X_KR: + case IXGBE_DEV_ID_X550EM_X_KX4: + case IXGBE_DEV_ID_X550EM_X_XFI: + case IXGBE_DEV_ID_X550EM_A_KR: + case IXGBE_DEV_ID_X550EM_A_KR_L: + media_type = ixgbe_media_type_backplane; + break; + case IXGBE_DEV_ID_X550EM_X_SFP: + case IXGBE_DEV_ID_X550EM_A_SFP: + case IXGBE_DEV_ID_X550EM_A_SFP_N: + media_type = ixgbe_media_type_fiber; + break; + case IXGBE_DEV_ID_X550EM_X_1G_T: + case IXGBE_DEV_ID_X550EM_X_10G_T: + case IXGBE_DEV_ID_X550EM_A_10G_T: + case IXGBE_DEV_ID_X550EM_A_1G_T: + case IXGBE_DEV_ID_X550EM_A_1G_T_L: + media_type = ixgbe_media_type_copper; + break; + default: + media_type = ixgbe_media_type_unknown; + break; + } + return media_type; +} + +/** ixgbe_init_ext_t_x550em - Start (unstall) the external Base T PHY. + ** @hw: pointer to hardware structure + **/ +static s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw) +{ + s32 status; + u16 reg; + + status = hw->phy.ops.read_reg(hw, + IXGBE_MDIO_TX_VENDOR_ALARMS_3, + MDIO_MMD_PMAPMD, + ®); + if (status) + return status; + + /* If PHY FW reset completed bit is set then this is the first + * SW instance after a power on so the PHY FW must be un-stalled. + */ + if (reg & IXGBE_MDIO_TX_VENDOR_ALARMS_3_RST_MASK) { + status = hw->phy.ops.read_reg(hw, + IXGBE_MDIO_GLOBAL_RES_PR_10, + MDIO_MMD_VEND1, + ®); + if (status) + return status; + + reg &= ~IXGBE_MDIO_POWER_UP_STALL; + + status = hw->phy.ops.write_reg(hw, + IXGBE_MDIO_GLOBAL_RES_PR_10, + MDIO_MMD_VEND1, + reg); + if (status) + return status; + } + + return status; +} + +/** + * ixgbe_set_mdio_speed - Set MDIO clock speed + * @hw: pointer to hardware structure + */ +static void ixgbe_set_mdio_speed(struct ixgbe_hw *hw) +{ + u32 hlreg0; + + switch (hw->device_id) { + case IXGBE_DEV_ID_X550EM_X_10G_T: + case IXGBE_DEV_ID_X550EM_A_SGMII: + case IXGBE_DEV_ID_X550EM_A_SGMII_L: + case IXGBE_DEV_ID_X550EM_A_10G_T: + case IXGBE_DEV_ID_X550EM_A_SFP: + /* Config MDIO clock speed before the first MDIO PHY access */ + hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0); + hlreg0 &= ~IXGBE_HLREG0_MDCSPD; + IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0); + break; + case IXGBE_DEV_ID_X550EM_A_1G_T: + case IXGBE_DEV_ID_X550EM_A_1G_T_L: + /* Select fast MDIO clock speed for these devices */ + hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0); + hlreg0 |= IXGBE_HLREG0_MDCSPD; + IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0); + break; + default: + break; + } +} + +/** ixgbe_reset_hw_X550em - Perform hardware reset + ** @hw: pointer to hardware structure + ** + ** Resets the hardware by resetting the transmit and receive units, masks + ** and clears all interrupts, perform a PHY reset, and perform a link (MAC) + ** reset. + **/ +static s32 ixgbe_reset_hw_X550em(struct ixgbe_hw *hw) +{ + ixgbe_link_speed link_speed; + s32 status; + u32 ctrl = 0; + u32 i; + bool link_up = false; + u32 swfw_mask = hw->phy.phy_semaphore_mask; + + /* Call adapter stop to disable Tx/Rx and clear interrupts */ + status = hw->mac.ops.stop_adapter(hw); + if (status) + return status; + + /* flush pending Tx transactions */ + ixgbe_clear_tx_pending(hw); + + /* set MDIO speed before talking to the PHY in case it's the 1st time */ + ixgbe_set_mdio_speed(hw); + + /* PHY ops must be identified and initialized prior to reset */ + status = hw->phy.ops.init(hw); + if (status == IXGBE_ERR_SFP_NOT_SUPPORTED || + status == IXGBE_ERR_PHY_ADDR_INVALID) + return status; + + /* start the external PHY */ + if (hw->phy.type == ixgbe_phy_x550em_ext_t) { + status = ixgbe_init_ext_t_x550em(hw); + if (status) + return status; + } + + /* Setup SFP module if there is one present. */ + if (hw->phy.sfp_setup_needed) { + status = hw->mac.ops.setup_sfp(hw); + hw->phy.sfp_setup_needed = false; + } + + if (status == IXGBE_ERR_SFP_NOT_SUPPORTED) + return status; + + /* Reset PHY */ + if (!hw->phy.reset_disable && hw->phy.ops.reset) + hw->phy.ops.reset(hw); + +mac_reset_top: + /* Issue global reset to the MAC. Needs to be SW reset if link is up. + * If link reset is used when link is up, it might reset the PHY when + * mng is using it. If link is down or the flag to force full link + * reset is set, then perform link reset. + */ + ctrl = IXGBE_CTRL_LNK_RST; + + if (!hw->force_full_reset) { + hw->mac.ops.check_link(hw, &link_speed, &link_up, false); + if (link_up) + ctrl = IXGBE_CTRL_RST; + } + + status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask); + if (status) { + hw_dbg(hw, "semaphore failed with %d", status); + return IXGBE_ERR_SWFW_SYNC; + } + + ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL); + IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl); + IXGBE_WRITE_FLUSH(hw); + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + usleep_range(1000, 1200); + + /* Poll for reset bit to self-clear meaning reset is complete */ + for (i = 0; i < 10; i++) { + ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); + if (!(ctrl & IXGBE_CTRL_RST_MASK)) + break; + udelay(1); + } + + if (ctrl & IXGBE_CTRL_RST_MASK) { + status = IXGBE_ERR_RESET_FAILED; + hw_dbg(hw, "Reset polling failed to complete.\n"); + } + + msleep(50); + + /* Double resets are required for recovery from certain error + * clear the multicast table. Also reset num_rar_entries to 128, + * since we modify this value when programming the SAN MAC address. + */ + if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) { + hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; + goto mac_reset_top; + } + + /* Store the permanent mac address */ + hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); + + /* Store MAC address from RAR0, clear receive address registers, and + * clear the multicast table. Also reset num_rar_entries to 128, + * since we modify this value when programming the SAN MAC address. + */ + hw->mac.num_rar_entries = 128; + hw->mac.ops.init_rx_addrs(hw); + + ixgbe_set_mdio_speed(hw); + + if (hw->device_id == IXGBE_DEV_ID_X550EM_X_SFP) + ixgbe_setup_mux_ctl(hw); + + return status; +} + +/** ixgbe_set_ethertype_anti_spoofing_X550 - Enable/Disable Ethertype + * anti-spoofing + * @hw: pointer to hardware structure + * @enable: enable or disable switch for Ethertype anti-spoofing + * @vf: Virtual Function pool - VF Pool to set for Ethertype anti-spoofing + **/ +static void ixgbe_set_ethertype_anti_spoofing_X550(struct ixgbe_hw *hw, + bool enable, int vf) +{ + int vf_target_reg = vf >> 3; + int vf_target_shift = vf % 8 + IXGBE_SPOOF_ETHERTYPEAS_SHIFT; + u32 pfvfspoof; + + pfvfspoof = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg)); + if (enable) + pfvfspoof |= BIT(vf_target_shift); + else + pfvfspoof &= ~BIT(vf_target_shift); + + IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), pfvfspoof); +} + +/** ixgbe_set_source_address_pruning_X550 - Enable/Disbale src address pruning + * @hw: pointer to hardware structure + * @enable: enable or disable source address pruning + * @pool: Rx pool to set source address pruning for + **/ +static void ixgbe_set_source_address_pruning_X550(struct ixgbe_hw *hw, + bool enable, + unsigned int pool) +{ + u64 pfflp; + + /* max rx pool is 63 */ + if (pool > 63) + return; + + pfflp = (u64)IXGBE_READ_REG(hw, IXGBE_PFFLPL); + pfflp |= (u64)IXGBE_READ_REG(hw, IXGBE_PFFLPH) << 32; + + if (enable) + pfflp |= (1ULL << pool); + else + pfflp &= ~(1ULL << pool); + + IXGBE_WRITE_REG(hw, IXGBE_PFFLPL, (u32)pfflp); + IXGBE_WRITE_REG(hw, IXGBE_PFFLPH, (u32)(pfflp >> 32)); +} + +/** + * ixgbe_setup_fc_backplane_x550em_a - Set up flow control + * @hw: pointer to hardware structure + * + * Called at init time to set up flow control. + **/ +static s32 ixgbe_setup_fc_backplane_x550em_a(struct ixgbe_hw *hw) +{ + s32 status = 0; + u32 an_cntl = 0; + + /* Validate the requested mode */ + if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) { + hw_err(hw, "ixgbe_fc_rx_pause not valid in strict IEEE mode\n"); + return IXGBE_ERR_INVALID_LINK_SETTINGS; + } + + if (hw->fc.requested_mode == ixgbe_fc_default) + hw->fc.requested_mode = ixgbe_fc_full; + + /* Set up the 1G and 10G flow control advertisement registers so the + * HW will be able to do FC autoneg once the cable is plugged in. If + * we link at 10G, the 1G advertisement is harmless and vice versa. + */ + status = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &an_cntl); + + if (status) { + hw_dbg(hw, "Auto-Negotiation did not complete\n"); + return status; + } + + /* The possible values of fc.requested_mode are: + * 0: Flow control is completely disabled + * 1: Rx flow control is enabled (we can receive pause frames, + * but not send pause frames). + * 2: Tx flow control is enabled (we can send pause frames but + * we do not support receiving pause frames). + * 3: Both Rx and Tx flow control (symmetric) are enabled. + * other: Invalid. + */ + switch (hw->fc.requested_mode) { + case ixgbe_fc_none: + /* Flow control completely disabled by software override. */ + an_cntl &= ~(IXGBE_KRM_AN_CNTL_1_SYM_PAUSE | + IXGBE_KRM_AN_CNTL_1_ASM_PAUSE); + break; + case ixgbe_fc_tx_pause: + /* Tx Flow control is enabled, and Rx Flow control is + * disabled by software override. + */ + an_cntl |= IXGBE_KRM_AN_CNTL_1_ASM_PAUSE; + an_cntl &= ~IXGBE_KRM_AN_CNTL_1_SYM_PAUSE; + break; + case ixgbe_fc_rx_pause: + /* Rx Flow control is enabled and Tx Flow control is + * disabled by software override. Since there really + * isn't a way to advertise that we are capable of RX + * Pause ONLY, we will advertise that we support both + * symmetric and asymmetric Rx PAUSE, as such we fall + * through to the fc_full statement. Later, we will + * disable the adapter's ability to send PAUSE frames. + */ + case ixgbe_fc_full: + /* Flow control (both Rx and Tx) is enabled by SW override. */ + an_cntl |= IXGBE_KRM_AN_CNTL_1_SYM_PAUSE | + IXGBE_KRM_AN_CNTL_1_ASM_PAUSE; + break; + default: + hw_err(hw, "Flow control param set incorrectly\n"); + return IXGBE_ERR_CONFIG; + } + + status = hw->mac.ops.write_iosf_sb_reg(hw, + IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, an_cntl); + + /* Restart auto-negotiation. */ + status = ixgbe_restart_an_internal_phy_x550em(hw); + + return status; +} + +/** + * ixgbe_set_mux - Set mux for port 1 access with CS4227 + * @hw: pointer to hardware structure + * @state: set mux if 1, clear if 0 + */ +static void ixgbe_set_mux(struct ixgbe_hw *hw, u8 state) +{ + u32 esdp; + + if (!hw->bus.lan_id) + return; + esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + if (state) + esdp |= IXGBE_ESDP_SDP1; + else + esdp &= ~IXGBE_ESDP_SDP1; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + IXGBE_WRITE_FLUSH(hw); +} + +/** + * ixgbe_acquire_swfw_sync_X550em - Acquire SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify which semaphore to acquire + * + * Acquires the SWFW semaphore and sets the I2C MUX + */ +static s32 ixgbe_acquire_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask) +{ + s32 status; + + status = ixgbe_acquire_swfw_sync_X540(hw, mask); + if (status) + return status; + + if (mask & IXGBE_GSSR_I2C_MASK) + ixgbe_set_mux(hw, 1); + + return 0; +} + +/** + * ixgbe_release_swfw_sync_X550em - Release SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify which semaphore to release + * + * Releases the SWFW semaphore and sets the I2C MUX + */ +static void ixgbe_release_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask) +{ + if (mask & IXGBE_GSSR_I2C_MASK) + ixgbe_set_mux(hw, 0); + + ixgbe_release_swfw_sync_X540(hw, mask); +} + +/** + * ixgbe_acquire_swfw_sync_x550em_a - Acquire SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify which semaphore to acquire + * + * Acquires the SWFW semaphore and get the shared PHY token as needed + */ +static s32 ixgbe_acquire_swfw_sync_x550em_a(struct ixgbe_hw *hw, u32 mask) +{ + u32 hmask = mask & ~IXGBE_GSSR_TOKEN_SM; + int retries = FW_PHY_TOKEN_RETRIES; + s32 status; + + while (--retries) { + status = 0; + if (hmask) + status = ixgbe_acquire_swfw_sync_X540(hw, hmask); + if (status) + return status; + if (!(mask & IXGBE_GSSR_TOKEN_SM)) + return 0; + + status = ixgbe_get_phy_token(hw); + if (!status) + return 0; + if (hmask) + ixgbe_release_swfw_sync_X540(hw, hmask); + if (status != IXGBE_ERR_TOKEN_RETRY) + return status; + msleep(FW_PHY_TOKEN_DELAY); + } + + return status; +} + +/** + * ixgbe_release_swfw_sync_x550em_a - Release SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify which semaphore to release + * + * Release the SWFW semaphore and puts the shared PHY token as needed + */ +static void ixgbe_release_swfw_sync_x550em_a(struct ixgbe_hw *hw, u32 mask) +{ + u32 hmask = mask & ~IXGBE_GSSR_TOKEN_SM; + + if (mask & IXGBE_GSSR_TOKEN_SM) + ixgbe_put_phy_token(hw); + + if (hmask) + ixgbe_release_swfw_sync_X540(hw, hmask); +} + +/** + * ixgbe_read_phy_reg_x550a - Reads specified PHY register + * @hw: pointer to hardware structure + * @reg_addr: 32 bit address of PHY register to read + * @device_type: 5 bit device type + * @phy_data: Pointer to read data from PHY register + * + * Reads a value from a specified PHY register using the SWFW lock and PHY + * Token. The PHY Token is needed since the MDIO is shared between to MAC + * instances. + */ +static s32 ixgbe_read_phy_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 *phy_data) +{ + u32 mask = hw->phy.phy_semaphore_mask | IXGBE_GSSR_TOKEN_SM; + s32 status; + + if (hw->mac.ops.acquire_swfw_sync(hw, mask)) + return IXGBE_ERR_SWFW_SYNC; + + status = hw->phy.ops.read_reg_mdi(hw, reg_addr, device_type, phy_data); + + hw->mac.ops.release_swfw_sync(hw, mask); + + return status; +} + +/** + * ixgbe_write_phy_reg_x550a - Writes specified PHY register + * @hw: pointer to hardware structure + * @reg_addr: 32 bit PHY register to write + * @device_type: 5 bit device type + * @phy_data: Data to write to the PHY register + * + * Writes a value to specified PHY register using the SWFW lock and PHY Token. + * The PHY Token is needed since the MDIO is shared between to MAC instances. + */ +static s32 ixgbe_write_phy_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 phy_data) +{ + u32 mask = hw->phy.phy_semaphore_mask | IXGBE_GSSR_TOKEN_SM; + s32 status; + + if (hw->mac.ops.acquire_swfw_sync(hw, mask)) + return IXGBE_ERR_SWFW_SYNC; + + status = ixgbe_write_phy_reg_mdi(hw, reg_addr, device_type, phy_data); + hw->mac.ops.release_swfw_sync(hw, mask); + + return status; +} + +#define X550_COMMON_MAC \ + .init_hw = &ixgbe_init_hw_generic, \ + .start_hw = &ixgbe_start_hw_X540, \ + .clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic, \ + .enable_rx_dma = &ixgbe_enable_rx_dma_generic, \ + .get_mac_addr = &ixgbe_get_mac_addr_generic, \ + .get_device_caps = &ixgbe_get_device_caps_generic, \ + .stop_adapter = &ixgbe_stop_adapter_generic, \ + .set_lan_id = &ixgbe_set_lan_id_multi_port_pcie, \ + .read_analog_reg8 = NULL, \ + .write_analog_reg8 = NULL, \ + .set_rxpba = &ixgbe_set_rxpba_generic, \ + .check_link = &ixgbe_check_mac_link_generic, \ + .blink_led_start = &ixgbe_blink_led_start_X540, \ + .blink_led_stop = &ixgbe_blink_led_stop_X540, \ + .set_rar = &ixgbe_set_rar_generic, \ + .clear_rar = &ixgbe_clear_rar_generic, \ + .set_vmdq = &ixgbe_set_vmdq_generic, \ + .set_vmdq_san_mac = &ixgbe_set_vmdq_san_mac_generic, \ + .clear_vmdq = &ixgbe_clear_vmdq_generic, \ + .init_rx_addrs = &ixgbe_init_rx_addrs_generic, \ + .update_mc_addr_list = &ixgbe_update_mc_addr_list_generic, \ + .enable_mc = &ixgbe_enable_mc_generic, \ + .disable_mc = &ixgbe_disable_mc_generic, \ + .clear_vfta = &ixgbe_clear_vfta_generic, \ + .set_vfta = &ixgbe_set_vfta_generic, \ + .fc_enable = &ixgbe_fc_enable_generic, \ + .set_fw_drv_ver = &ixgbe_set_fw_drv_ver_x550, \ + .init_uta_tables = &ixgbe_init_uta_tables_generic, \ + .set_mac_anti_spoofing = &ixgbe_set_mac_anti_spoofing, \ + .set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing, \ + .set_source_address_pruning = \ + &ixgbe_set_source_address_pruning_X550, \ + .set_ethertype_anti_spoofing = \ + &ixgbe_set_ethertype_anti_spoofing_X550, \ + .disable_rx_buff = &ixgbe_disable_rx_buff_generic, \ + .enable_rx_buff = &ixgbe_enable_rx_buff_generic, \ + .get_thermal_sensor_data = NULL, \ + .init_thermal_sensor_thresh = NULL, \ + .fw_recovery_mode = &ixgbe_fw_recovery_mode_X550, \ + .enable_rx = &ixgbe_enable_rx_generic, \ + .disable_rx = &ixgbe_disable_rx_x550, \ + +static const struct ixgbe_mac_operations mac_ops_X550 = { + X550_COMMON_MAC + .led_on = ixgbe_led_on_generic, + .led_off = ixgbe_led_off_generic, + .init_led_link_act = ixgbe_init_led_link_act_generic, + .reset_hw = &ixgbe_reset_hw_X540, + .get_media_type = &ixgbe_get_media_type_X540, + .get_san_mac_addr = &ixgbe_get_san_mac_addr_generic, + .get_wwn_prefix = &ixgbe_get_wwn_prefix_generic, + .setup_link = &ixgbe_setup_mac_link_X540, + .get_link_capabilities = &ixgbe_get_copper_link_capabilities_generic, + .get_bus_info = &ixgbe_get_bus_info_generic, + .setup_sfp = NULL, + .acquire_swfw_sync = &ixgbe_acquire_swfw_sync_X540, + .release_swfw_sync = &ixgbe_release_swfw_sync_X540, + .init_swfw_sync = &ixgbe_init_swfw_sync_X540, + .prot_autoc_read = prot_autoc_read_generic, + .prot_autoc_write = prot_autoc_write_generic, + .setup_fc = ixgbe_setup_fc_generic, + .fc_autoneg = ixgbe_fc_autoneg, +}; + +static const struct ixgbe_mac_operations mac_ops_X550EM_x = { + X550_COMMON_MAC + .led_on = ixgbe_led_on_t_x550em, + .led_off = ixgbe_led_off_t_x550em, + .init_led_link_act = ixgbe_init_led_link_act_generic, + .reset_hw = &ixgbe_reset_hw_X550em, + .get_media_type = &ixgbe_get_media_type_X550em, + .get_san_mac_addr = NULL, + .get_wwn_prefix = NULL, + .setup_link = &ixgbe_setup_mac_link_X540, + .get_link_capabilities = &ixgbe_get_link_capabilities_X550em, + .get_bus_info = &ixgbe_get_bus_info_X550em, + .setup_sfp = ixgbe_setup_sfp_modules_X550em, + .acquire_swfw_sync = &ixgbe_acquire_swfw_sync_X550em, + .release_swfw_sync = &ixgbe_release_swfw_sync_X550em, + .init_swfw_sync = &ixgbe_init_swfw_sync_X540, + .setup_fc = NULL, /* defined later */ + .fc_autoneg = ixgbe_fc_autoneg, + .read_iosf_sb_reg = ixgbe_read_iosf_sb_reg_x550, + .write_iosf_sb_reg = ixgbe_write_iosf_sb_reg_x550, +}; + +static const struct ixgbe_mac_operations mac_ops_X550EM_x_fw = { + X550_COMMON_MAC + .led_on = NULL, + .led_off = NULL, + .init_led_link_act = NULL, + .reset_hw = &ixgbe_reset_hw_X550em, + .get_media_type = &ixgbe_get_media_type_X550em, + .get_san_mac_addr = NULL, + .get_wwn_prefix = NULL, + .setup_link = &ixgbe_setup_mac_link_X540, + .get_link_capabilities = &ixgbe_get_link_capabilities_X550em, + .get_bus_info = &ixgbe_get_bus_info_X550em, + .setup_sfp = ixgbe_setup_sfp_modules_X550em, + .acquire_swfw_sync = &ixgbe_acquire_swfw_sync_X550em, + .release_swfw_sync = &ixgbe_release_swfw_sync_X550em, + .init_swfw_sync = &ixgbe_init_swfw_sync_X540, + .setup_fc = NULL, + .fc_autoneg = ixgbe_fc_autoneg, + .read_iosf_sb_reg = ixgbe_read_iosf_sb_reg_x550, + .write_iosf_sb_reg = ixgbe_write_iosf_sb_reg_x550, +}; + +static const struct ixgbe_mac_operations mac_ops_x550em_a = { + X550_COMMON_MAC + .led_on = ixgbe_led_on_t_x550em, + .led_off = ixgbe_led_off_t_x550em, + .init_led_link_act = ixgbe_init_led_link_act_generic, + .reset_hw = ixgbe_reset_hw_X550em, + .get_media_type = ixgbe_get_media_type_X550em, + .get_san_mac_addr = NULL, + .get_wwn_prefix = NULL, + .setup_link = &ixgbe_setup_mac_link_X540, + .get_link_capabilities = ixgbe_get_link_capabilities_X550em, + .get_bus_info = ixgbe_get_bus_info_X550em, + .setup_sfp = ixgbe_setup_sfp_modules_X550em, + .acquire_swfw_sync = ixgbe_acquire_swfw_sync_x550em_a, + .release_swfw_sync = ixgbe_release_swfw_sync_x550em_a, + .setup_fc = ixgbe_setup_fc_x550em, + .fc_autoneg = ixgbe_fc_autoneg, + .read_iosf_sb_reg = ixgbe_read_iosf_sb_reg_x550a, + .write_iosf_sb_reg = ixgbe_write_iosf_sb_reg_x550a, +}; + +static const struct ixgbe_mac_operations mac_ops_x550em_a_fw = { + X550_COMMON_MAC + .led_on = ixgbe_led_on_generic, + .led_off = ixgbe_led_off_generic, + .init_led_link_act = ixgbe_init_led_link_act_generic, + .reset_hw = ixgbe_reset_hw_X550em, + .get_media_type = ixgbe_get_media_type_X550em, + .get_san_mac_addr = NULL, + .get_wwn_prefix = NULL, + .setup_link = NULL, /* defined later */ + .get_link_capabilities = ixgbe_get_link_capabilities_X550em, + .get_bus_info = ixgbe_get_bus_info_X550em, + .setup_sfp = ixgbe_setup_sfp_modules_X550em, + .acquire_swfw_sync = ixgbe_acquire_swfw_sync_x550em_a, + .release_swfw_sync = ixgbe_release_swfw_sync_x550em_a, + .setup_fc = ixgbe_setup_fc_x550em, + .fc_autoneg = ixgbe_fc_autoneg, + .read_iosf_sb_reg = ixgbe_read_iosf_sb_reg_x550a, + .write_iosf_sb_reg = ixgbe_write_iosf_sb_reg_x550a, +}; + +#define X550_COMMON_EEP \ + .read = &ixgbe_read_ee_hostif_X550, \ + .read_buffer = &ixgbe_read_ee_hostif_buffer_X550, \ + .write = &ixgbe_write_ee_hostif_X550, \ + .write_buffer = &ixgbe_write_ee_hostif_buffer_X550, \ + .validate_checksum = &ixgbe_validate_eeprom_checksum_X550, \ + .update_checksum = &ixgbe_update_eeprom_checksum_X550, \ + .calc_checksum = &ixgbe_calc_eeprom_checksum_X550, \ + +static const struct ixgbe_eeprom_operations eeprom_ops_X550 = { + X550_COMMON_EEP + .init_params = &ixgbe_init_eeprom_params_X550, +}; + +static const struct ixgbe_eeprom_operations eeprom_ops_X550EM_x = { + X550_COMMON_EEP + .init_params = &ixgbe_init_eeprom_params_X540, +}; + +#define X550_COMMON_PHY \ + .identify_sfp = &ixgbe_identify_module_generic, \ + .reset = NULL, \ + .setup_link_speed = &ixgbe_setup_phy_link_speed_generic, \ + .read_i2c_byte = &ixgbe_read_i2c_byte_generic, \ + .write_i2c_byte = &ixgbe_write_i2c_byte_generic, \ + .read_i2c_sff8472 = &ixgbe_read_i2c_sff8472_generic, \ + .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_generic, \ + .write_i2c_eeprom = &ixgbe_write_i2c_eeprom_generic, \ + .setup_link = &ixgbe_setup_phy_link_generic, \ + .set_phy_power = NULL, + +static const struct ixgbe_phy_operations phy_ops_X550 = { + X550_COMMON_PHY + .check_overtemp = &ixgbe_tn_check_overtemp, + .init = NULL, + .identify = &ixgbe_identify_phy_generic, + .read_reg = &ixgbe_read_phy_reg_generic, + .write_reg = &ixgbe_write_phy_reg_generic, +}; + +static const struct ixgbe_phy_operations phy_ops_X550EM_x = { + X550_COMMON_PHY + .check_overtemp = &ixgbe_tn_check_overtemp, + .init = &ixgbe_init_phy_ops_X550em, + .identify = &ixgbe_identify_phy_x550em, + .read_reg = &ixgbe_read_phy_reg_generic, + .write_reg = &ixgbe_write_phy_reg_generic, +}; + +static const struct ixgbe_phy_operations phy_ops_x550em_x_fw = { + X550_COMMON_PHY + .check_overtemp = NULL, + .init = ixgbe_init_phy_ops_X550em, + .identify = ixgbe_identify_phy_x550em, + .read_reg = NULL, + .write_reg = NULL, + .read_reg_mdi = NULL, + .write_reg_mdi = NULL, +}; + +static const struct ixgbe_phy_operations phy_ops_x550em_a = { + X550_COMMON_PHY + .check_overtemp = &ixgbe_tn_check_overtemp, + .init = &ixgbe_init_phy_ops_X550em, + .identify = &ixgbe_identify_phy_x550em, + .read_reg = &ixgbe_read_phy_reg_x550a, + .write_reg = &ixgbe_write_phy_reg_x550a, + .read_reg_mdi = &ixgbe_read_phy_reg_mdi, + .write_reg_mdi = &ixgbe_write_phy_reg_mdi, +}; + +static const struct ixgbe_phy_operations phy_ops_x550em_a_fw = { + X550_COMMON_PHY + .check_overtemp = ixgbe_check_overtemp_fw, + .init = ixgbe_init_phy_ops_X550em, + .identify = ixgbe_identify_phy_fw, + .read_reg = NULL, + .write_reg = NULL, + .read_reg_mdi = NULL, + .write_reg_mdi = NULL, +}; + +static const struct ixgbe_link_operations link_ops_x550em_x = { + .read_link = &ixgbe_read_i2c_combined_generic, + .read_link_unlocked = &ixgbe_read_i2c_combined_generic_unlocked, + .write_link = &ixgbe_write_i2c_combined_generic, + .write_link_unlocked = &ixgbe_write_i2c_combined_generic_unlocked, +}; + +static const u32 ixgbe_mvals_X550[IXGBE_MVALS_IDX_LIMIT] = { + IXGBE_MVALS_INIT(X550) +}; + +static const u32 ixgbe_mvals_X550EM_x[IXGBE_MVALS_IDX_LIMIT] = { + IXGBE_MVALS_INIT(X550EM_x) +}; + +static const u32 ixgbe_mvals_x550em_a[IXGBE_MVALS_IDX_LIMIT] = { + IXGBE_MVALS_INIT(X550EM_a) +}; + +const struct ixgbe_info ixgbe_X550_info = { + .mac = ixgbe_mac_X550, + .get_invariants = &ixgbe_get_invariants_X540, + .mac_ops = &mac_ops_X550, + .eeprom_ops = &eeprom_ops_X550, + .phy_ops = &phy_ops_X550, + .mbx_ops = &mbx_ops_generic, + .mvals = ixgbe_mvals_X550, +}; + +const struct ixgbe_info ixgbe_X550EM_x_info = { + .mac = ixgbe_mac_X550EM_x, + .get_invariants = &ixgbe_get_invariants_X550_x, + .mac_ops = &mac_ops_X550EM_x, + .eeprom_ops = &eeprom_ops_X550EM_x, + .phy_ops = &phy_ops_X550EM_x, + .mbx_ops = &mbx_ops_generic, + .mvals = ixgbe_mvals_X550EM_x, + .link_ops = &link_ops_x550em_x, +}; + +const struct ixgbe_info ixgbe_x550em_x_fw_info = { + .mac = ixgbe_mac_X550EM_x, + .get_invariants = ixgbe_get_invariants_X550_x_fw, + .mac_ops = &mac_ops_X550EM_x_fw, + .eeprom_ops = &eeprom_ops_X550EM_x, + .phy_ops = &phy_ops_x550em_x_fw, + .mbx_ops = &mbx_ops_generic, + .mvals = ixgbe_mvals_X550EM_x, +}; + +const struct ixgbe_info ixgbe_x550em_a_info = { + .mac = ixgbe_mac_x550em_a, + .get_invariants = &ixgbe_get_invariants_X550_a, + .mac_ops = &mac_ops_x550em_a, + .eeprom_ops = &eeprom_ops_X550EM_x, + .phy_ops = &phy_ops_x550em_a, + .mbx_ops = &mbx_ops_generic, + .mvals = ixgbe_mvals_x550em_a, +}; + +const struct ixgbe_info ixgbe_x550em_a_fw_info = { + .mac = ixgbe_mac_x550em_a, + .get_invariants = ixgbe_get_invariants_X550_a_fw, + .mac_ops = &mac_ops_x550em_a_fw, + .eeprom_ops = &eeprom_ops_X550EM_x, + .phy_ops = &phy_ops_x550em_a_fw, + .mbx_ops = &mbx_ops_generic, + .mvals = ixgbe_mvals_x550em_a, +}; -- cgit v1.2.3