From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/pwm/pwm-sti.c | 701 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 701 insertions(+) create mode 100644 drivers/pwm/pwm-sti.c (limited to 'drivers/pwm/pwm-sti.c') diff --git a/drivers/pwm/pwm-sti.c b/drivers/pwm/pwm-sti.c new file mode 100644 index 000000000..652fdb8dc --- /dev/null +++ b/drivers/pwm/pwm-sti.c @@ -0,0 +1,701 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * PWM device driver for ST SoCs + * + * Copyright (C) 2013-2016 STMicroelectronics (R&D) Limited + * + * Author: Ajit Pal Singh + * Lee Jones + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define PWM_OUT_VAL(x) (0x00 + (4 * (x))) /* Device's Duty Cycle register */ +#define PWM_CPT_VAL(x) (0x10 + (4 * (x))) /* Capture value */ +#define PWM_CPT_EDGE(x) (0x30 + (4 * (x))) /* Edge to capture on */ + +#define STI_PWM_CTRL 0x50 /* Control/Config register */ +#define STI_INT_EN 0x54 /* Interrupt Enable/Disable register */ +#define STI_INT_STA 0x58 /* Interrupt Status register */ +#define PWM_INT_ACK 0x5c +#define PWM_PRESCALE_LOW_MASK 0x0f +#define PWM_PRESCALE_HIGH_MASK 0xf0 +#define PWM_CPT_EDGE_MASK 0x03 +#define PWM_INT_ACK_MASK 0x1ff + +#define STI_MAX_CPT_DEVS 4 +#define CPT_DC_MAX 0xff + +/* Regfield IDs */ +enum { + /* Bits in PWM_CTRL*/ + PWMCLK_PRESCALE_LOW, + PWMCLK_PRESCALE_HIGH, + CPTCLK_PRESCALE, + + PWM_OUT_EN, + PWM_CPT_EN, + + PWM_CPT_INT_EN, + PWM_CPT_INT_STAT, + + /* Keep last */ + MAX_REGFIELDS +}; + +/* + * Each capture input can be programmed to detect rising-edge, falling-edge, + * either edge or neither egde. + */ +enum sti_cpt_edge { + CPT_EDGE_DISABLED, + CPT_EDGE_RISING, + CPT_EDGE_FALLING, + CPT_EDGE_BOTH, +}; + +struct sti_cpt_ddata { + u32 snapshot[3]; + unsigned int index; + struct mutex lock; + wait_queue_head_t wait; +}; + +struct sti_pwm_compat_data { + const struct reg_field *reg_fields; + unsigned int pwm_num_devs; + unsigned int cpt_num_devs; + unsigned int max_pwm_cnt; + unsigned int max_prescale; + struct sti_cpt_ddata *ddata; +}; + +struct sti_pwm_chip { + struct device *dev; + struct clk *pwm_clk; + struct clk *cpt_clk; + struct regmap *regmap; + struct sti_pwm_compat_data *cdata; + struct regmap_field *prescale_low; + struct regmap_field *prescale_high; + struct regmap_field *pwm_out_en; + struct regmap_field *pwm_cpt_en; + struct regmap_field *pwm_cpt_int_en; + struct regmap_field *pwm_cpt_int_stat; + struct pwm_chip chip; + struct pwm_device *cur; + unsigned long configured; + unsigned int en_count; + struct mutex sti_pwm_lock; /* To sync between enable/disable calls */ + void __iomem *mmio; +}; + +static const struct reg_field sti_pwm_regfields[MAX_REGFIELDS] = { + [PWMCLK_PRESCALE_LOW] = REG_FIELD(STI_PWM_CTRL, 0, 3), + [PWMCLK_PRESCALE_HIGH] = REG_FIELD(STI_PWM_CTRL, 11, 14), + [CPTCLK_PRESCALE] = REG_FIELD(STI_PWM_CTRL, 4, 8), + [PWM_OUT_EN] = REG_FIELD(STI_PWM_CTRL, 9, 9), + [PWM_CPT_EN] = REG_FIELD(STI_PWM_CTRL, 10, 10), + [PWM_CPT_INT_EN] = REG_FIELD(STI_INT_EN, 1, 4), + [PWM_CPT_INT_STAT] = REG_FIELD(STI_INT_STA, 1, 4), +}; + +static inline struct sti_pwm_chip *to_sti_pwmchip(struct pwm_chip *chip) +{ + return container_of(chip, struct sti_pwm_chip, chip); +} + +/* + * Calculate the prescaler value corresponding to the period. + */ +static int sti_pwm_get_prescale(struct sti_pwm_chip *pc, unsigned long period, + unsigned int *prescale) +{ + struct sti_pwm_compat_data *cdata = pc->cdata; + unsigned long clk_rate; + unsigned long value; + unsigned int ps; + + clk_rate = clk_get_rate(pc->pwm_clk); + if (!clk_rate) { + dev_err(pc->dev, "failed to get clock rate\n"); + return -EINVAL; + } + + /* + * prescale = ((period_ns * clk_rate) / (10^9 * (max_pwm_cnt + 1)) - 1 + */ + value = NSEC_PER_SEC / clk_rate; + value *= cdata->max_pwm_cnt + 1; + + if (period % value) + return -EINVAL; + + ps = period / value - 1; + if (ps > cdata->max_prescale) + return -EINVAL; + + *prescale = ps; + + return 0; +} + +/* + * For STiH4xx PWM IP, the PWM period is fixed to 256 local clock cycles. The + * only way to change the period (apart from changing the PWM input clock) is + * to change the PWM clock prescaler. + * + * The prescaler is of 8 bits, so 256 prescaler values and hence 256 possible + * period values are supported (for a particular clock rate). The requested + * period will be applied only if it matches one of these 256 values. + */ +static int sti_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct sti_pwm_chip *pc = to_sti_pwmchip(chip); + struct sti_pwm_compat_data *cdata = pc->cdata; + unsigned int ncfg, value, prescale = 0; + struct pwm_device *cur = pc->cur; + struct device *dev = pc->dev; + bool period_same = false; + int ret; + + ncfg = hweight_long(pc->configured); + if (ncfg) + period_same = (period_ns == pwm_get_period(cur)); + + /* + * Allow configuration changes if one of the following conditions + * satisfy. + * 1. No devices have been configured. + * 2. Only one device has been configured and the new request is for + * the same device. + * 3. Only one device has been configured and the new request is for + * a new device and period of the new device is same as the current + * configured period. + * 4. More than one devices are configured and period of the new + * requestis the same as the current period. + */ + if (!ncfg || + ((ncfg == 1) && (pwm->hwpwm == cur->hwpwm)) || + ((ncfg == 1) && (pwm->hwpwm != cur->hwpwm) && period_same) || + ((ncfg > 1) && period_same)) { + /* Enable clock before writing to PWM registers. */ + ret = clk_enable(pc->pwm_clk); + if (ret) + return ret; + + ret = clk_enable(pc->cpt_clk); + if (ret) + return ret; + + if (!period_same) { + ret = sti_pwm_get_prescale(pc, period_ns, &prescale); + if (ret) + goto clk_dis; + + value = prescale & PWM_PRESCALE_LOW_MASK; + + ret = regmap_field_write(pc->prescale_low, value); + if (ret) + goto clk_dis; + + value = (prescale & PWM_PRESCALE_HIGH_MASK) >> 4; + + ret = regmap_field_write(pc->prescale_high, value); + if (ret) + goto clk_dis; + } + + /* + * When PWMVal == 0, PWM pulse = 1 local clock cycle. + * When PWMVal == max_pwm_count, + * PWM pulse = (max_pwm_count + 1) local cycles, + * that is continuous pulse: signal never goes low. + */ + value = cdata->max_pwm_cnt * duty_ns / period_ns; + + ret = regmap_write(pc->regmap, PWM_OUT_VAL(pwm->hwpwm), value); + if (ret) + goto clk_dis; + + ret = regmap_field_write(pc->pwm_cpt_int_en, 0); + + set_bit(pwm->hwpwm, &pc->configured); + pc->cur = pwm; + + dev_dbg(dev, "prescale:%u, period:%i, duty:%i, value:%u\n", + prescale, period_ns, duty_ns, value); + } else { + return -EINVAL; + } + +clk_dis: + clk_disable(pc->pwm_clk); + clk_disable(pc->cpt_clk); + return ret; +} + +static int sti_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct sti_pwm_chip *pc = to_sti_pwmchip(chip); + struct device *dev = pc->dev; + int ret = 0; + + /* + * Since we have a common enable for all PWM devices, do not enable if + * already enabled. + */ + mutex_lock(&pc->sti_pwm_lock); + + if (!pc->en_count) { + ret = clk_enable(pc->pwm_clk); + if (ret) + goto out; + + ret = clk_enable(pc->cpt_clk); + if (ret) + goto out; + + ret = regmap_field_write(pc->pwm_out_en, 1); + if (ret) { + dev_err(dev, "failed to enable PWM device %u: %d\n", + pwm->hwpwm, ret); + goto out; + } + } + + pc->en_count++; + +out: + mutex_unlock(&pc->sti_pwm_lock); + return ret; +} + +static void sti_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct sti_pwm_chip *pc = to_sti_pwmchip(chip); + + mutex_lock(&pc->sti_pwm_lock); + + if (--pc->en_count) { + mutex_unlock(&pc->sti_pwm_lock); + return; + } + + regmap_field_write(pc->pwm_out_en, 0); + + clk_disable(pc->pwm_clk); + clk_disable(pc->cpt_clk); + + mutex_unlock(&pc->sti_pwm_lock); +} + +static void sti_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct sti_pwm_chip *pc = to_sti_pwmchip(chip); + + clear_bit(pwm->hwpwm, &pc->configured); +} + +static int sti_pwm_capture(struct pwm_chip *chip, struct pwm_device *pwm, + struct pwm_capture *result, unsigned long timeout) +{ + struct sti_pwm_chip *pc = to_sti_pwmchip(chip); + struct sti_pwm_compat_data *cdata = pc->cdata; + struct sti_cpt_ddata *ddata = &cdata->ddata[pwm->hwpwm]; + struct device *dev = pc->dev; + unsigned int effective_ticks; + unsigned long long high, low; + int ret; + + if (pwm->hwpwm >= cdata->cpt_num_devs) { + dev_err(dev, "device %u is not valid\n", pwm->hwpwm); + return -EINVAL; + } + + mutex_lock(&ddata->lock); + ddata->index = 0; + + /* Prepare capture measurement */ + regmap_write(pc->regmap, PWM_CPT_EDGE(pwm->hwpwm), CPT_EDGE_RISING); + regmap_field_write(pc->pwm_cpt_int_en, BIT(pwm->hwpwm)); + + /* Enable capture */ + ret = regmap_field_write(pc->pwm_cpt_en, 1); + if (ret) { + dev_err(dev, "failed to enable PWM capture %u: %d\n", + pwm->hwpwm, ret); + goto out; + } + + ret = wait_event_interruptible_timeout(ddata->wait, ddata->index > 1, + msecs_to_jiffies(timeout)); + + regmap_write(pc->regmap, PWM_CPT_EDGE(pwm->hwpwm), CPT_EDGE_DISABLED); + + if (ret == -ERESTARTSYS) + goto out; + + switch (ddata->index) { + case 0: + case 1: + /* + * Getting here could mean: + * - input signal is constant of less than 1 Hz + * - there is no input signal at all + * + * In such case the frequency is rounded down to 0 + */ + result->period = 0; + result->duty_cycle = 0; + + break; + + case 2: + /* We have everying we need */ + high = ddata->snapshot[1] - ddata->snapshot[0]; + low = ddata->snapshot[2] - ddata->snapshot[1]; + + effective_ticks = clk_get_rate(pc->cpt_clk); + + result->period = (high + low) * NSEC_PER_SEC; + result->period /= effective_ticks; + + result->duty_cycle = high * NSEC_PER_SEC; + result->duty_cycle /= effective_ticks; + + break; + + default: + dev_err(dev, "internal error\n"); + break; + } + +out: + /* Disable capture */ + regmap_field_write(pc->pwm_cpt_en, 0); + + mutex_unlock(&ddata->lock); + return ret; +} + +static int sti_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, + const struct pwm_state *state) +{ + int err; + + if (state->polarity != PWM_POLARITY_NORMAL) + return -EINVAL; + + if (!state->enabled) { + if (pwm->state.enabled) + sti_pwm_disable(chip, pwm); + + return 0; + } + + err = sti_pwm_config(pwm->chip, pwm, state->duty_cycle, state->period); + if (err) + return err; + + if (!pwm->state.enabled) + err = sti_pwm_enable(chip, pwm); + + return err; +} + +static const struct pwm_ops sti_pwm_ops = { + .capture = sti_pwm_capture, + .apply = sti_pwm_apply, + .free = sti_pwm_free, + .owner = THIS_MODULE, +}; + +static irqreturn_t sti_pwm_interrupt(int irq, void *data) +{ + struct sti_pwm_chip *pc = data; + struct device *dev = pc->dev; + struct sti_cpt_ddata *ddata; + int devicenum; + unsigned int cpt_int_stat; + unsigned int reg; + int ret = IRQ_NONE; + + ret = regmap_field_read(pc->pwm_cpt_int_stat, &cpt_int_stat); + if (ret) + return ret; + + while (cpt_int_stat) { + devicenum = ffs(cpt_int_stat) - 1; + + ddata = &pc->cdata->ddata[devicenum]; + + /* + * Capture input: + * _______ _______ + * | | | | + * __| |_________________| |________ + * ^0 ^1 ^2 + * + * Capture start by the first available rising edge. When a + * capture event occurs, capture value (CPT_VALx) is stored, + * index incremented, capture edge changed. + * + * After the capture, if the index > 1, we have collected the + * necessary data so we signal the thread waiting for it and + * disable the capture by setting capture edge to none + */ + + regmap_read(pc->regmap, + PWM_CPT_VAL(devicenum), + &ddata->snapshot[ddata->index]); + + switch (ddata->index) { + case 0: + case 1: + regmap_read(pc->regmap, PWM_CPT_EDGE(devicenum), ®); + reg ^= PWM_CPT_EDGE_MASK; + regmap_write(pc->regmap, PWM_CPT_EDGE(devicenum), reg); + + ddata->index++; + break; + + case 2: + regmap_write(pc->regmap, + PWM_CPT_EDGE(devicenum), + CPT_EDGE_DISABLED); + wake_up(&ddata->wait); + break; + + default: + dev_err(dev, "Internal error\n"); + } + + cpt_int_stat &= ~BIT_MASK(devicenum); + + ret = IRQ_HANDLED; + } + + /* Just ACK everything */ + regmap_write(pc->regmap, PWM_INT_ACK, PWM_INT_ACK_MASK); + + return ret; +} + +static int sti_pwm_probe_dt(struct sti_pwm_chip *pc) +{ + struct device *dev = pc->dev; + const struct reg_field *reg_fields; + struct device_node *np = dev->of_node; + struct sti_pwm_compat_data *cdata = pc->cdata; + u32 num_devs; + int ret; + + ret = of_property_read_u32(np, "st,pwm-num-chan", &num_devs); + if (!ret) + cdata->pwm_num_devs = num_devs; + + ret = of_property_read_u32(np, "st,capture-num-chan", &num_devs); + if (!ret) + cdata->cpt_num_devs = num_devs; + + if (!cdata->pwm_num_devs && !cdata->cpt_num_devs) { + dev_err(dev, "No channels configured\n"); + return -EINVAL; + } + + reg_fields = cdata->reg_fields; + + pc->prescale_low = devm_regmap_field_alloc(dev, pc->regmap, + reg_fields[PWMCLK_PRESCALE_LOW]); + if (IS_ERR(pc->prescale_low)) + return PTR_ERR(pc->prescale_low); + + pc->prescale_high = devm_regmap_field_alloc(dev, pc->regmap, + reg_fields[PWMCLK_PRESCALE_HIGH]); + if (IS_ERR(pc->prescale_high)) + return PTR_ERR(pc->prescale_high); + + pc->pwm_out_en = devm_regmap_field_alloc(dev, pc->regmap, + reg_fields[PWM_OUT_EN]); + if (IS_ERR(pc->pwm_out_en)) + return PTR_ERR(pc->pwm_out_en); + + pc->pwm_cpt_en = devm_regmap_field_alloc(dev, pc->regmap, + reg_fields[PWM_CPT_EN]); + if (IS_ERR(pc->pwm_cpt_en)) + return PTR_ERR(pc->pwm_cpt_en); + + pc->pwm_cpt_int_en = devm_regmap_field_alloc(dev, pc->regmap, + reg_fields[PWM_CPT_INT_EN]); + if (IS_ERR(pc->pwm_cpt_int_en)) + return PTR_ERR(pc->pwm_cpt_int_en); + + pc->pwm_cpt_int_stat = devm_regmap_field_alloc(dev, pc->regmap, + reg_fields[PWM_CPT_INT_STAT]); + if (PTR_ERR_OR_ZERO(pc->pwm_cpt_int_stat)) + return PTR_ERR(pc->pwm_cpt_int_stat); + + return 0; +} + +static const struct regmap_config sti_pwm_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +static int sti_pwm_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct sti_pwm_compat_data *cdata; + struct sti_pwm_chip *pc; + unsigned int i; + int irq, ret; + + pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL); + if (!pc) + return -ENOMEM; + + cdata = devm_kzalloc(dev, sizeof(*cdata), GFP_KERNEL); + if (!cdata) + return -ENOMEM; + + pc->mmio = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(pc->mmio)) + return PTR_ERR(pc->mmio); + + pc->regmap = devm_regmap_init_mmio(dev, pc->mmio, + &sti_pwm_regmap_config); + if (IS_ERR(pc->regmap)) + return PTR_ERR(pc->regmap); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + ret = devm_request_irq(&pdev->dev, irq, sti_pwm_interrupt, 0, + pdev->name, pc); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to request IRQ\n"); + return ret; + } + + /* + * Setup PWM data with default values: some values could be replaced + * with specific ones provided from Device Tree. + */ + cdata->reg_fields = sti_pwm_regfields; + cdata->max_prescale = 0xff; + cdata->max_pwm_cnt = 255; + cdata->pwm_num_devs = 0; + cdata->cpt_num_devs = 0; + + pc->cdata = cdata; + pc->dev = dev; + pc->en_count = 0; + mutex_init(&pc->sti_pwm_lock); + + ret = sti_pwm_probe_dt(pc); + if (ret) + return ret; + + if (cdata->pwm_num_devs) { + pc->pwm_clk = of_clk_get_by_name(dev->of_node, "pwm"); + if (IS_ERR(pc->pwm_clk)) { + dev_err(dev, "failed to get PWM clock\n"); + return PTR_ERR(pc->pwm_clk); + } + + ret = clk_prepare(pc->pwm_clk); + if (ret) { + dev_err(dev, "failed to prepare clock\n"); + return ret; + } + } + + if (cdata->cpt_num_devs) { + pc->cpt_clk = of_clk_get_by_name(dev->of_node, "capture"); + if (IS_ERR(pc->cpt_clk)) { + dev_err(dev, "failed to get PWM capture clock\n"); + return PTR_ERR(pc->cpt_clk); + } + + ret = clk_prepare(pc->cpt_clk); + if (ret) { + dev_err(dev, "failed to prepare clock\n"); + return ret; + } + + cdata->ddata = devm_kzalloc(dev, cdata->cpt_num_devs * sizeof(*cdata->ddata), GFP_KERNEL); + if (!cdata->ddata) + return -ENOMEM; + } + + pc->chip.dev = dev; + pc->chip.ops = &sti_pwm_ops; + pc->chip.npwm = pc->cdata->pwm_num_devs; + + for (i = 0; i < cdata->cpt_num_devs; i++) { + struct sti_cpt_ddata *ddata = &cdata->ddata[i]; + + init_waitqueue_head(&ddata->wait); + mutex_init(&ddata->lock); + } + + ret = pwmchip_add(&pc->chip); + if (ret < 0) { + clk_unprepare(pc->pwm_clk); + clk_unprepare(pc->cpt_clk); + return ret; + } + + platform_set_drvdata(pdev, pc); + + return 0; +} + +static int sti_pwm_remove(struct platform_device *pdev) +{ + struct sti_pwm_chip *pc = platform_get_drvdata(pdev); + + pwmchip_remove(&pc->chip); + + clk_unprepare(pc->pwm_clk); + clk_unprepare(pc->cpt_clk); + + return 0; +} + +static const struct of_device_id sti_pwm_of_match[] = { + { .compatible = "st,sti-pwm", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, sti_pwm_of_match); + +static struct platform_driver sti_pwm_driver = { + .driver = { + .name = "sti-pwm", + .of_match_table = sti_pwm_of_match, + }, + .probe = sti_pwm_probe, + .remove = sti_pwm_remove, +}; +module_platform_driver(sti_pwm_driver); + +MODULE_AUTHOR("Ajit Pal Singh "); +MODULE_DESCRIPTION("STMicroelectronics ST PWM driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3