From 9db5397d87fc212863d4750c85ff8b9a6ed42b95 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 4 May 2024 12:10:17 +0200 Subject: Adding upstream version 6.1.82. Signed-off-by: Daniel Baumann --- drivers/tty/serial/amba-pl011.c | 60 ++++++++++++++++++++--------------------- drivers/tty/serial/max310x.c | 53 +++++++++++++++++++++++++++++------- drivers/tty/tty_ioctl.c | 4 +-- 3 files changed, 75 insertions(+), 42 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index c74eaf255..2f0f05259 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -1345,11 +1345,41 @@ static void pl011_start_tx_pio(struct uart_amba_port *uap) } } +static void pl011_rs485_tx_start(struct uart_amba_port *uap) +{ + struct uart_port *port = &uap->port; + u32 cr; + + /* Enable transmitter */ + cr = pl011_read(uap, REG_CR); + cr |= UART011_CR_TXE; + + /* Disable receiver if half-duplex */ + if (!(port->rs485.flags & SER_RS485_RX_DURING_TX)) + cr &= ~UART011_CR_RXE; + + if (port->rs485.flags & SER_RS485_RTS_ON_SEND) + cr &= ~UART011_CR_RTS; + else + cr |= UART011_CR_RTS; + + pl011_write(cr, uap, REG_CR); + + if (port->rs485.delay_rts_before_send) + mdelay(port->rs485.delay_rts_before_send); + + uap->rs485_tx_started = true; +} + static void pl011_start_tx(struct uart_port *port) { struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port); + if ((uap->port.rs485.flags & SER_RS485_ENABLED) && + !uap->rs485_tx_started) + pl011_rs485_tx_start(uap); + if (!pl011_dma_tx_start(uap)) pl011_start_tx_pio(uap); } @@ -1431,42 +1461,12 @@ static bool pl011_tx_char(struct uart_amba_port *uap, unsigned char c, return true; } -static void pl011_rs485_tx_start(struct uart_amba_port *uap) -{ - struct uart_port *port = &uap->port; - u32 cr; - - /* Enable transmitter */ - cr = pl011_read(uap, REG_CR); - cr |= UART011_CR_TXE; - - /* Disable receiver if half-duplex */ - if (!(port->rs485.flags & SER_RS485_RX_DURING_TX)) - cr &= ~UART011_CR_RXE; - - if (port->rs485.flags & SER_RS485_RTS_ON_SEND) - cr &= ~UART011_CR_RTS; - else - cr |= UART011_CR_RTS; - - pl011_write(cr, uap, REG_CR); - - if (port->rs485.delay_rts_before_send) - mdelay(port->rs485.delay_rts_before_send); - - uap->rs485_tx_started = true; -} - /* Returns true if tx interrupts have to be (kept) enabled */ static bool pl011_tx_chars(struct uart_amba_port *uap, bool from_irq) { struct circ_buf *xmit = &uap->port.state->xmit; int count = uap->fifosize >> 1; - if ((uap->port.rs485.flags & SER_RS485_ENABLED) && - !uap->rs485_tx_started) - pl011_rs485_tx_start(uap); - if (uap->port.x_char) { if (!pl011_tx_char(uap, uap->port.x_char, from_irq)) return true; diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index 338cb19de..163a89f84 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -237,6 +237,14 @@ #define MAX310x_REV_MASK (0xf8) #define MAX310X_WRITE_BIT 0x80 +/* Port startup definitions */ +#define MAX310X_PORT_STARTUP_WAIT_RETRIES 20 /* Number of retries */ +#define MAX310X_PORT_STARTUP_WAIT_DELAY_MS 10 /* Delay between retries */ + +/* Crystal-related definitions */ +#define MAX310X_XTAL_WAIT_RETRIES 20 /* Number of retries */ +#define MAX310X_XTAL_WAIT_DELAY_MS 10 /* Delay between retries */ + /* MAX3107 specific */ #define MAX3107_REV_ID (0xa0) @@ -583,7 +591,7 @@ static int max310x_update_best_err(unsigned long f, long *besterr) return 1; } -static u32 max310x_set_ref_clk(struct device *dev, struct max310x_port *s, +static s32 max310x_set_ref_clk(struct device *dev, struct max310x_port *s, unsigned long freq, bool xtal) { unsigned int div, clksrc, pllcfg = 0; @@ -641,12 +649,20 @@ static u32 max310x_set_ref_clk(struct device *dev, struct max310x_port *s, /* Wait for crystal */ if (xtal) { - unsigned int val; - msleep(10); - regmap_read(s->regmap, MAX310X_STS_IRQSTS_REG, &val); - if (!(val & MAX310X_STS_CLKREADY_BIT)) { - dev_warn(dev, "clock is not stable yet\n"); - } + bool stable = false; + unsigned int try = 0, val = 0; + + do { + msleep(MAX310X_XTAL_WAIT_DELAY_MS); + regmap_read(s->regmap, MAX310X_STS_IRQSTS_REG, &val); + + if (val & MAX310X_STS_CLKREADY_BIT) + stable = true; + } while (!stable && (++try < MAX310X_XTAL_WAIT_RETRIES)); + + if (!stable) + return dev_err_probe(dev, -EAGAIN, + "clock is not stable\n"); } return bestfreq; @@ -1274,7 +1290,7 @@ static int max310x_probe(struct device *dev, const struct max310x_devtype *devty { int i, ret, fmin, fmax, freq; struct max310x_port *s; - u32 uartclk = 0; + s32 uartclk = 0; bool xtal; for (i = 0; i < devtype->nr; i++) @@ -1337,6 +1353,9 @@ static int max310x_probe(struct device *dev, const struct max310x_devtype *devty goto out_clk; for (i = 0; i < devtype->nr; i++) { + bool started = false; + unsigned int try = 0, val = 0; + /* Reset port */ regmap_write(regmaps[i], MAX310X_MODE2_REG, MAX310X_MODE2_RST_BIT); @@ -1345,13 +1364,27 @@ static int max310x_probe(struct device *dev, const struct max310x_devtype *devty /* Wait for port startup */ do { - regmap_read(regmaps[i], MAX310X_BRGDIVLSB_REG, &ret); - } while (ret != 0x01); + msleep(MAX310X_PORT_STARTUP_WAIT_DELAY_MS); + regmap_read(regmaps[i], MAX310X_BRGDIVLSB_REG, &val); + + if (val == 0x01) + started = true; + } while (!started && (++try < MAX310X_PORT_STARTUP_WAIT_RETRIES)); + + if (!started) { + ret = dev_err_probe(dev, -EAGAIN, "port reset failed\n"); + goto out_uart; + } regmap_write(regmaps[i], MAX310X_MODE1_REG, devtype->mode1); } uartclk = max310x_set_ref_clk(dev, s, freq, xtal); + if (uartclk < 0) { + ret = uartclk; + goto out_uart; + } + dev_dbg(dev, "Reference clock set to %i Hz\n", uartclk); for (i = 0; i < devtype->nr; i++) { diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c index 8767c504b..9d3b23730 100644 --- a/drivers/tty/tty_ioctl.c +++ b/drivers/tty/tty_ioctl.c @@ -859,7 +859,7 @@ int tty_mode_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) ret = -EFAULT; return ret; case TIOCSLCKTRMIOS: - if (!capable(CAP_SYS_ADMIN)) + if (!checkpoint_restore_ns_capable(&init_user_ns)) return -EPERM; copy_termios_locked(real_tty, &kterm); if (user_termios_to_kernel_termios(&kterm, @@ -876,7 +876,7 @@ int tty_mode_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) ret = -EFAULT; return ret; case TIOCSLCKTRMIOS: - if (!capable(CAP_SYS_ADMIN)) + if (!checkpoint_restore_ns_capable(&init_user_ns)) return -EPERM; copy_termios_locked(real_tty, &kterm); if (user_termios_to_kernel_termios_1(&kterm, -- cgit v1.2.3