From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/usb/cdns3/Kconfig | 122 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 122 insertions(+) create mode 100644 drivers/usb/cdns3/Kconfig (limited to 'drivers/usb/cdns3/Kconfig') diff --git a/drivers/usb/cdns3/Kconfig b/drivers/usb/cdns3/Kconfig new file mode 100644 index 000000000..b98ca0a13 --- /dev/null +++ b/drivers/usb/cdns3/Kconfig @@ -0,0 +1,122 @@ +config USB_CDNS_SUPPORT + tristate "Cadence USB Support" + depends on USB_SUPPORT && (USB || USB_GADGET) && HAS_DMA + select USB_XHCI_PLATFORM if USB_XHCI_HCD + select USB_ROLE_SWITCH + help + Say Y here if your system has a Cadence USBSS or USBSSP + dual-role controller. + It supports: dual-role switch, Host-only, and Peripheral-only. + +config USB_CDNS_HOST + bool + +if USB_CDNS_SUPPORT + +config USB_CDNS3 + tristate "Cadence USB3 Dual-Role Controller" + depends on USB_CDNS_SUPPORT + help + Say Y here if your system has a Cadence USB3 dual-role controller. + It supports: dual-role switch, Host-only, and Peripheral-only. + + If you choose to build this driver is a dynamically linked + as module, the module will be called cdns3.ko. +endif + +if USB_CDNS3 + +config USB_CDNS3_GADGET + bool "Cadence USB3 device controller" + depends on USB_GADGET=y || USB_GADGET=USB_CDNS3 + help + Say Y here to enable device controller functionality of the + Cadence USBSS-DEV driver. + + This controller supports FF, HS and SS mode. It doesn't support + LS and SSP mode. + +config USB_CDNS3_HOST + bool "Cadence USB3 host controller" + depends on USB=y || USB=USB_CDNS3 + select USB_CDNS_HOST + help + Say Y here to enable host controller functionality of the + Cadence driver. + + Host controller is compliant with XHCI so it will use + standard XHCI driver. + +config USB_CDNS3_PCI_WRAP + tristate "Cadence USB3 support on PCIe-based platforms" + depends on USB_PCI && ACPI + default USB_CDNS3 + help + If you're using the USBSS Core IP with a PCIe, please say + 'Y' or 'M' here. + + If you choose to build this driver as module it will + be dynamically linked and module will be called cdns3-pci.ko + +config USB_CDNS3_TI + tristate "Cadence USB3 support on TI platforms" + depends on ARCH_K3 || COMPILE_TEST + default USB_CDNS3 + help + Say 'Y' or 'M' here if you are building for Texas Instruments + platforms that contain Cadence USB3 controller core. + + e.g. J721e. + +config USB_CDNS3_IMX + tristate "Cadence USB3 support on NXP i.MX platforms" + depends on ARCH_MXC || COMPILE_TEST + default USB_CDNS3 + help + Say 'Y' or 'M' here if you are building for NXP i.MX + platforms that contain Cadence USB3 controller core. + + For example, imx8qm and imx8qxp. + +endif + +if USB_CDNS_SUPPORT + +config USB_CDNSP_PCI + tristate "Cadence CDNSP Dual-Role Controller" + depends on USB_CDNS_SUPPORT && USB_PCI && ACPI + help + Say Y here if your system has a Cadence CDNSP dual-role controller. + It supports: dual-role switch Host-only, and Peripheral-only. + + If you choose to build this driver is a dynamically linked + module, the module will be called cdnsp.ko. +endif + +if USB_CDNSP_PCI + +config USB_CDNSP_GADGET + bool "Cadence CDNSP device controller" + depends on USB_GADGET=y || USB_GADGET=USB_CDNSP_PCI + help + Say Y here to enable device controller functionality of the + Cadence CDNSP-DEV driver. + + Cadence CDNSP Device Controller in device mode is + very similar to XHCI controller. Therefore some algorithms + used has been taken from host driver. + This controller supports FF, HS, SS and SSP mode. + It doesn't support LS. + +config USB_CDNSP_HOST + bool "Cadence CDNSP host controller" + depends on USB=y || USB=USB_CDNSP_PCI + select USB_CDNS_HOST + help + Say Y here to enable host controller functionality of the + Cadence driver. + + Host controller is compliant with XHCI so it uses + standard XHCI driver. + +endif -- cgit v1.2.3