From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/usb/host/ehci-fsl.c | 744 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 744 insertions(+) create mode 100644 drivers/usb/host/ehci-fsl.c (limited to 'drivers/usb/host/ehci-fsl.c') diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c new file mode 100644 index 000000000..38d06e5ab --- /dev/null +++ b/drivers/usb/host/ehci-fsl.c @@ -0,0 +1,744 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2005-2009 MontaVista Software, Inc. + * Copyright 2008,2012,2015 Freescale Semiconductor, Inc. + * + * Ported to 834x by Randy Vinson using code provided + * by Hunter Wu. + * Power Management support by Dave Liu , + * Jerry Huang and + * Anton Vorontsov . + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "ehci.h" +#include "ehci-fsl.h" + +#define DRIVER_DESC "Freescale EHCI Host controller driver" +#define DRV_NAME "fsl-ehci" + +static struct hc_driver __read_mostly fsl_ehci_hc_driver; + +/* configure so an HC device and id are always provided */ +/* always called with process context; sleeping is OK */ + +/* + * fsl_ehci_drv_probe - initialize FSL-based HCDs + * @pdev: USB Host Controller being probed + * + * Context: task context, might sleep + * + * Allocates basic resources for this USB host controller. + */ +static int fsl_ehci_drv_probe(struct platform_device *pdev) +{ + struct fsl_usb2_platform_data *pdata; + struct usb_hcd *hcd; + struct resource *res; + int irq; + int retval; + u32 tmp; + + pr_debug("initializing FSL-SOC USB Controller\n"); + + /* Need platform data for setup */ + pdata = dev_get_platdata(&pdev->dev); + if (!pdata) { + dev_err(&pdev->dev, + "No platform data for %s.\n", dev_name(&pdev->dev)); + return -ENODEV; + } + + /* + * This is a host mode driver, verify that we're supposed to be + * in host mode. + */ + if (!((pdata->operating_mode == FSL_USB2_DR_HOST) || + (pdata->operating_mode == FSL_USB2_MPH_HOST) || + (pdata->operating_mode == FSL_USB2_DR_OTG))) { + dev_err(&pdev->dev, + "Non Host Mode configured for %s. Wrong driver linked.\n", + dev_name(&pdev->dev)); + return -ENODEV; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + hcd = __usb_create_hcd(&fsl_ehci_hc_driver, pdev->dev.parent, + &pdev->dev, dev_name(&pdev->dev), NULL); + if (!hcd) { + retval = -ENOMEM; + goto err1; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + hcd->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(hcd->regs)) { + retval = PTR_ERR(hcd->regs); + goto err2; + } + + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); + + pdata->regs = hcd->regs; + + if (pdata->power_budget) + hcd->power_budget = pdata->power_budget; + + /* + * do platform specific init: check the clock, grab/config pins, etc. + */ + if (pdata->init && pdata->init(pdev)) { + retval = -ENODEV; + goto err2; + } + + /* Enable USB controller, 83xx or 8536 */ + if (pdata->have_sysif_regs && pdata->controller_ver < FSL_USB_VER_1_6) { + tmp = ioread32be(hcd->regs + FSL_SOC_USB_CTRL); + tmp &= ~CONTROL_REGISTER_W1C_MASK; + tmp |= 0x4; + iowrite32be(tmp, hcd->regs + FSL_SOC_USB_CTRL); + } + + /* Set USB_EN bit to select ULPI phy for USB controller version 2.5 */ + if (pdata->controller_ver == FSL_USB_VER_2_5 && + pdata->phy_mode == FSL_USB2_PHY_ULPI) + iowrite32be(USB_CTRL_USB_EN, hcd->regs + FSL_SOC_USB_CTRL); + + /* + * Enable UTMI phy and program PTS field in UTMI mode before asserting + * controller reset for USB Controller version 2.5 + */ + if (pdata->has_fsl_erratum_a007792) { + tmp = ioread32be(hcd->regs + FSL_SOC_USB_CTRL); + tmp &= ~CONTROL_REGISTER_W1C_MASK; + tmp |= CTRL_UTMI_PHY_EN; + iowrite32be(tmp, hcd->regs + FSL_SOC_USB_CTRL); + + writel(PORT_PTS_UTMI, hcd->regs + FSL_SOC_USB_PORTSC1); + } + + /* Don't need to set host mode here. It will be done by tdi_reset() */ + + retval = usb_add_hcd(hcd, irq, IRQF_SHARED); + if (retval != 0) + goto err2; + device_wakeup_enable(hcd->self.controller); + +#ifdef CONFIG_USB_OTG + if (pdata->operating_mode == FSL_USB2_DR_OTG) { + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + + hcd->usb_phy = usb_get_phy(USB_PHY_TYPE_USB2); + dev_dbg(&pdev->dev, "hcd=0x%p ehci=0x%p, phy=0x%p\n", + hcd, ehci, hcd->usb_phy); + + if (!IS_ERR_OR_NULL(hcd->usb_phy)) { + retval = otg_set_host(hcd->usb_phy->otg, + &ehci_to_hcd(ehci)->self); + if (retval) { + usb_put_phy(hcd->usb_phy); + goto err2; + } + } else { + dev_err(&pdev->dev, "can't find phy\n"); + retval = -ENODEV; + goto err2; + } + + hcd->skip_phy_initialization = 1; + } +#endif + return retval; + + err2: + usb_put_hcd(hcd); + err1: + dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), retval); + if (pdata->exit) + pdata->exit(pdev); + return retval; +} + +static bool usb_phy_clk_valid(struct usb_hcd *hcd) +{ + void __iomem *non_ehci = hcd->regs; + bool ret = true; + + if (!(ioread32be(non_ehci + FSL_SOC_USB_CTRL) & PHY_CLK_VALID)) + ret = false; + + return ret; +} + +static int ehci_fsl_setup_phy(struct usb_hcd *hcd, + enum fsl_usb2_phy_modes phy_mode, + unsigned int port_offset) +{ + u32 portsc, tmp; + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + void __iomem *non_ehci = hcd->regs; + struct device *dev = hcd->self.controller; + struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev); + + if (pdata->controller_ver < 0) { + dev_warn(hcd->self.controller, "Could not get controller version\n"); + return -ENODEV; + } + + portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]); + portsc &= ~(PORT_PTS_MSK | PORT_PTS_PTW); + + switch (phy_mode) { + case FSL_USB2_PHY_ULPI: + if (pdata->have_sysif_regs && pdata->controller_ver) { + /* controller version 1.6 or above */ + /* turn off UTMI PHY first */ + tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL); + tmp &= ~(CONTROL_REGISTER_W1C_MASK | UTMI_PHY_EN); + iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL); + + /* then turn on ULPI and enable USB controller */ + tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL); + tmp &= ~CONTROL_REGISTER_W1C_MASK; + tmp |= ULPI_PHY_CLK_SEL | USB_CTRL_USB_EN; + iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL); + } + portsc |= PORT_PTS_ULPI; + break; + case FSL_USB2_PHY_SERIAL: + portsc |= PORT_PTS_SERIAL; + break; + case FSL_USB2_PHY_UTMI_WIDE: + portsc |= PORT_PTS_PTW; + fallthrough; + case FSL_USB2_PHY_UTMI: + /* Presence of this node "has_fsl_erratum_a006918" + * in device-tree is used to stop USB controller + * initialization in Linux + */ + if (pdata->has_fsl_erratum_a006918) { + dev_warn(dev, "USB PHY clock invalid\n"); + return -EINVAL; + } + fallthrough; + case FSL_USB2_PHY_UTMI_DUAL: + /* PHY_CLK_VALID bit is de-featured from all controller + * versions below 2.4 and is to be checked only for + * internal UTMI phy + */ + if (pdata->controller_ver > FSL_USB_VER_2_4 && + pdata->have_sysif_regs && !usb_phy_clk_valid(hcd)) { + dev_err(dev, "USB PHY clock invalid\n"); + return -EINVAL; + } + + if (pdata->have_sysif_regs && pdata->controller_ver) { + /* controller version 1.6 or above */ + tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL); + tmp &= ~CONTROL_REGISTER_W1C_MASK; + tmp |= UTMI_PHY_EN; + iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL); + + mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI PHY CLK to + become stable - 10ms*/ + } + /* enable UTMI PHY */ + if (pdata->have_sysif_regs) { + tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL); + tmp &= ~CONTROL_REGISTER_W1C_MASK; + tmp |= CTRL_UTMI_PHY_EN; + iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL); + } + portsc |= PORT_PTS_UTMI; + break; + case FSL_USB2_PHY_NONE: + break; + } + + if (pdata->have_sysif_regs && + pdata->controller_ver > FSL_USB_VER_1_6 && + !usb_phy_clk_valid(hcd)) { + dev_warn(hcd->self.controller, "USB PHY clock invalid\n"); + return -EINVAL; + } + + ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]); + + if (phy_mode != FSL_USB2_PHY_ULPI && pdata->have_sysif_regs) { + tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL); + tmp &= ~CONTROL_REGISTER_W1C_MASK; + tmp |= USB_CTRL_USB_EN; + iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL); + } + + return 0; +} + +static int ehci_fsl_usb_setup(struct ehci_hcd *ehci) +{ + struct usb_hcd *hcd = ehci_to_hcd(ehci); + struct fsl_usb2_platform_data *pdata; + void __iomem *non_ehci = hcd->regs; + + pdata = dev_get_platdata(hcd->self.controller); + + if (pdata->have_sysif_regs) { + /* + * Turn on cache snooping hardware, since some PowerPC platforms + * wholly rely on hardware to deal with cache coherent + */ + + /* Setup Snooping for all the 4GB space */ + /* SNOOP1 starts from 0x0, size 2G */ + iowrite32be(0x0 | SNOOP_SIZE_2GB, + non_ehci + FSL_SOC_USB_SNOOP1); + /* SNOOP2 starts from 0x80000000, size 2G */ + iowrite32be(0x80000000 | SNOOP_SIZE_2GB, + non_ehci + FSL_SOC_USB_SNOOP2); + } + + /* Deal with USB erratum A-005275 */ + if (pdata->has_fsl_erratum_a005275 == 1) + ehci->has_fsl_hs_errata = 1; + + if (pdata->has_fsl_erratum_a005697 == 1) + ehci->has_fsl_susp_errata = 1; + + if ((pdata->operating_mode == FSL_USB2_DR_HOST) || + (pdata->operating_mode == FSL_USB2_DR_OTG)) + if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0)) + return -EINVAL; + + if (pdata->operating_mode == FSL_USB2_MPH_HOST) { + + /* Deal with USB Erratum #14 on MPC834x Rev 1.0 & 1.1 chips */ + if (pdata->has_fsl_erratum_14 == 1) + ehci->has_fsl_port_bug = 1; + + if (pdata->port_enables & FSL_USB2_PORT0_ENABLED) + if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0)) + return -EINVAL; + + if (pdata->port_enables & FSL_USB2_PORT1_ENABLED) + if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 1)) + return -EINVAL; + } + + if (pdata->have_sysif_regs) { +#ifdef CONFIG_FSL_SOC_BOOKE + iowrite32be(0x00000008, non_ehci + FSL_SOC_USB_PRICTRL); + iowrite32be(0x00000080, non_ehci + FSL_SOC_USB_AGECNTTHRSH); +#else + iowrite32be(0x0000000c, non_ehci + FSL_SOC_USB_PRICTRL); + iowrite32be(0x00000040, non_ehci + FSL_SOC_USB_AGECNTTHRSH); +#endif + iowrite32be(0x00000001, non_ehci + FSL_SOC_USB_SICTRL); + } + + return 0; +} + +/* called after powerup, by probe or system-pm "wakeup" */ +static int ehci_fsl_reinit(struct ehci_hcd *ehci) +{ + if (ehci_fsl_usb_setup(ehci)) + return -EINVAL; + + return 0; +} + +/* called during probe() after chip reset completes */ +static int ehci_fsl_setup(struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + int retval; + struct fsl_usb2_platform_data *pdata; + struct device *dev; + + dev = hcd->self.controller; + pdata = dev_get_platdata(hcd->self.controller); + ehci->big_endian_desc = pdata->big_endian_desc; + ehci->big_endian_mmio = pdata->big_endian_mmio; + + /* EHCI registers start at offset 0x100 */ + ehci->caps = hcd->regs + 0x100; + +#if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_85xx) + /* + * Deal with MPC834X/85XX that need port power to be cycled + * after the power fault condition is removed. Otherwise the + * state machine does not reflect PORTSC[CSC] correctly. + */ + ehci->need_oc_pp_cycle = 1; +#endif + + hcd->has_tt = 1; + + retval = ehci_setup(hcd); + if (retval) + return retval; + + if (of_device_is_compatible(dev->parent->of_node, + "fsl,mpc5121-usb2-dr")) { + /* + * set SBUSCFG:AHBBRST so that control msgs don't + * fail when doing heavy PATA writes. + */ + ehci_writel(ehci, SBUSCFG_INCR8, + hcd->regs + FSL_SOC_USB_SBUSCFG); + } + + retval = ehci_fsl_reinit(ehci); + return retval; +} + +struct ehci_fsl { + struct ehci_hcd ehci; + +#ifdef CONFIG_PM + /* Saved USB PHY settings, need to restore after deep sleep. */ + u32 usb_ctrl; +#endif +}; + +#ifdef CONFIG_PM + +#ifdef CONFIG_PPC_MPC512x +static int ehci_fsl_mpc512x_drv_suspend(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev); + u32 tmp; + +#ifdef CONFIG_DYNAMIC_DEBUG + u32 mode = ehci_readl(ehci, hcd->regs + FSL_SOC_USB_USBMODE); + mode &= USBMODE_CM_MASK; + tmp = ehci_readl(ehci, hcd->regs + 0x140); /* usbcmd */ + + dev_dbg(dev, "suspend=%d already_suspended=%d " + "mode=%d usbcmd %08x\n", pdata->suspended, + pdata->already_suspended, mode, tmp); +#endif + + /* + * If the controller is already suspended, then this must be a + * PM suspend. Remember this fact, so that we will leave the + * controller suspended at PM resume time. + */ + if (pdata->suspended) { + dev_dbg(dev, "already suspended, leaving early\n"); + pdata->already_suspended = 1; + return 0; + } + + dev_dbg(dev, "suspending...\n"); + + ehci->rh_state = EHCI_RH_SUSPENDED; + dev->power.power_state = PMSG_SUSPEND; + + /* ignore non-host interrupts */ + clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + + /* stop the controller */ + tmp = ehci_readl(ehci, &ehci->regs->command); + tmp &= ~CMD_RUN; + ehci_writel(ehci, tmp, &ehci->regs->command); + + /* save EHCI registers */ + pdata->pm_command = ehci_readl(ehci, &ehci->regs->command); + pdata->pm_command &= ~CMD_RUN; + pdata->pm_status = ehci_readl(ehci, &ehci->regs->status); + pdata->pm_intr_enable = ehci_readl(ehci, &ehci->regs->intr_enable); + pdata->pm_frame_index = ehci_readl(ehci, &ehci->regs->frame_index); + pdata->pm_segment = ehci_readl(ehci, &ehci->regs->segment); + pdata->pm_frame_list = ehci_readl(ehci, &ehci->regs->frame_list); + pdata->pm_async_next = ehci_readl(ehci, &ehci->regs->async_next); + pdata->pm_configured_flag = + ehci_readl(ehci, &ehci->regs->configured_flag); + pdata->pm_portsc = ehci_readl(ehci, &ehci->regs->port_status[0]); + pdata->pm_usbgenctrl = ehci_readl(ehci, + hcd->regs + FSL_SOC_USB_USBGENCTRL); + + /* clear the W1C bits */ + pdata->pm_portsc &= cpu_to_hc32(ehci, ~PORT_RWC_BITS); + + pdata->suspended = 1; + + /* clear PP to cut power to the port */ + tmp = ehci_readl(ehci, &ehci->regs->port_status[0]); + tmp &= ~PORT_POWER; + ehci_writel(ehci, tmp, &ehci->regs->port_status[0]); + + return 0; +} + +static int ehci_fsl_mpc512x_drv_resume(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev); + u32 tmp; + + dev_dbg(dev, "suspend=%d already_suspended=%d\n", + pdata->suspended, pdata->already_suspended); + + /* + * If the controller was already suspended at suspend time, + * then don't resume it now. + */ + if (pdata->already_suspended) { + dev_dbg(dev, "already suspended, leaving early\n"); + pdata->already_suspended = 0; + return 0; + } + + if (!pdata->suspended) { + dev_dbg(dev, "not suspended, leaving early\n"); + return 0; + } + + pdata->suspended = 0; + + dev_dbg(dev, "resuming...\n"); + + /* set host mode */ + tmp = USBMODE_CM_HOST | (pdata->es ? USBMODE_ES : 0); + ehci_writel(ehci, tmp, hcd->regs + FSL_SOC_USB_USBMODE); + + ehci_writel(ehci, pdata->pm_usbgenctrl, + hcd->regs + FSL_SOC_USB_USBGENCTRL); + ehci_writel(ehci, ISIPHYCTRL_PXE | ISIPHYCTRL_PHYE, + hcd->regs + FSL_SOC_USB_ISIPHYCTRL); + + ehci_writel(ehci, SBUSCFG_INCR8, hcd->regs + FSL_SOC_USB_SBUSCFG); + + /* restore EHCI registers */ + ehci_writel(ehci, pdata->pm_command, &ehci->regs->command); + ehci_writel(ehci, pdata->pm_intr_enable, &ehci->regs->intr_enable); + ehci_writel(ehci, pdata->pm_frame_index, &ehci->regs->frame_index); + ehci_writel(ehci, pdata->pm_segment, &ehci->regs->segment); + ehci_writel(ehci, pdata->pm_frame_list, &ehci->regs->frame_list); + ehci_writel(ehci, pdata->pm_async_next, &ehci->regs->async_next); + ehci_writel(ehci, pdata->pm_configured_flag, + &ehci->regs->configured_flag); + ehci_writel(ehci, pdata->pm_portsc, &ehci->regs->port_status[0]); + + set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + ehci->rh_state = EHCI_RH_RUNNING; + dev->power.power_state = PMSG_ON; + + tmp = ehci_readl(ehci, &ehci->regs->command); + tmp |= CMD_RUN; + ehci_writel(ehci, tmp, &ehci->regs->command); + + usb_hcd_resume_root_hub(hcd); + + return 0; +} +#else +static inline int ehci_fsl_mpc512x_drv_suspend(struct device *dev) +{ + return 0; +} + +static inline int ehci_fsl_mpc512x_drv_resume(struct device *dev) +{ + return 0; +} +#endif /* CONFIG_PPC_MPC512x */ + +static struct ehci_fsl *hcd_to_ehci_fsl(struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + + return container_of(ehci, struct ehci_fsl, ehci); +} + +static int ehci_fsl_drv_suspend(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd); + void __iomem *non_ehci = hcd->regs; + + if (of_device_is_compatible(dev->parent->of_node, + "fsl,mpc5121-usb2-dr")) { + return ehci_fsl_mpc512x_drv_suspend(dev); + } + + ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd), + device_may_wakeup(dev)); + if (!fsl_deep_sleep()) + return 0; + + ehci_fsl->usb_ctrl = ioread32be(non_ehci + FSL_SOC_USB_CTRL); + return 0; +} + +static int ehci_fsl_drv_resume(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd); + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + void __iomem *non_ehci = hcd->regs; + + if (of_device_is_compatible(dev->parent->of_node, + "fsl,mpc5121-usb2-dr")) { + return ehci_fsl_mpc512x_drv_resume(dev); + } + + ehci_prepare_ports_for_controller_resume(ehci); + if (!fsl_deep_sleep()) + return 0; + + usb_root_hub_lost_power(hcd->self.root_hub); + + /* Restore USB PHY settings and enable the controller. */ + iowrite32be(ehci_fsl->usb_ctrl, non_ehci + FSL_SOC_USB_CTRL); + + ehci_reset(ehci); + ehci_fsl_reinit(ehci); + + return 0; +} + +static int ehci_fsl_drv_restore(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + + usb_root_hub_lost_power(hcd->self.root_hub); + return 0; +} + +static const struct dev_pm_ops ehci_fsl_pm_ops = { + .suspend = ehci_fsl_drv_suspend, + .resume = ehci_fsl_drv_resume, + .restore = ehci_fsl_drv_restore, +}; + +#define EHCI_FSL_PM_OPS (&ehci_fsl_pm_ops) +#else +#define EHCI_FSL_PM_OPS NULL +#endif /* CONFIG_PM */ + +#ifdef CONFIG_USB_OTG +static int ehci_start_port_reset(struct usb_hcd *hcd, unsigned port) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + u32 status; + + if (!port) + return -EINVAL; + + port--; + + /* start port reset before HNP protocol time out */ + status = readl(&ehci->regs->port_status[port]); + if (!(status & PORT_CONNECT)) + return -ENODEV; + + /* hub_wq will finish the reset later */ + if (ehci_is_TDI(ehci)) { + writel(PORT_RESET | + (status & ~(PORT_CSC | PORT_PEC | PORT_OCC)), + &ehci->regs->port_status[port]); + } else { + writel(PORT_RESET, &ehci->regs->port_status[port]); + } + + return 0; +} +#else +#define ehci_start_port_reset NULL +#endif /* CONFIG_USB_OTG */ + +static const struct ehci_driver_overrides ehci_fsl_overrides __initconst = { + .extra_priv_size = sizeof(struct ehci_fsl), + .reset = ehci_fsl_setup, +}; + +/** + * fsl_ehci_drv_remove - shutdown processing for FSL-based HCDs + * @pdev: USB Host Controller being removed + * + * Context: task context, might sleep + * + * Reverses the effect of usb_hcd_fsl_probe(). + */ +static int fsl_ehci_drv_remove(struct platform_device *pdev) +{ + struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev); + struct usb_hcd *hcd = platform_get_drvdata(pdev); + + if (!IS_ERR_OR_NULL(hcd->usb_phy)) { + otg_set_host(hcd->usb_phy->otg, NULL); + usb_put_phy(hcd->usb_phy); + } + + usb_remove_hcd(hcd); + + /* + * do platform specific un-initialization: + * release iomux pins, disable clock, etc. + */ + if (pdata->exit) + pdata->exit(pdev); + usb_put_hcd(hcd); + + return 0; +} + +static struct platform_driver ehci_fsl_driver = { + .probe = fsl_ehci_drv_probe, + .remove = fsl_ehci_drv_remove, + .shutdown = usb_hcd_platform_shutdown, + .driver = { + .name = "fsl-ehci", + .pm = EHCI_FSL_PM_OPS, + }, +}; + +static int __init ehci_fsl_init(void) +{ + if (usb_disabled()) + return -ENODEV; + + ehci_init_driver(&fsl_ehci_hc_driver, &ehci_fsl_overrides); + + fsl_ehci_hc_driver.product_desc = + "Freescale On-Chip EHCI Host Controller"; + fsl_ehci_hc_driver.start_port_reset = ehci_start_port_reset; + + + return platform_driver_register(&ehci_fsl_driver); +} +module_init(ehci_fsl_init); + +static void __exit ehci_fsl_cleanup(void) +{ + platform_driver_unregister(&ehci_fsl_driver); +} +module_exit(ehci_fsl_cleanup); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); -- cgit v1.2.3