From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/usb/serial/kobil_sct.h | 78 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 78 insertions(+) create mode 100644 drivers/usb/serial/kobil_sct.h (limited to 'drivers/usb/serial/kobil_sct.h') diff --git a/drivers/usb/serial/kobil_sct.h b/drivers/usb/serial/kobil_sct.h new file mode 100644 index 000000000..030c1b426 --- /dev/null +++ b/drivers/usb/serial/kobil_sct.h @@ -0,0 +1,78 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#define SUSBCRequest_SetBaudRateParityAndStopBits 1 +#define SUSBCR_SBR_MASK 0xFF00 +#define SUSBCR_SBR_1200 0x0100 +#define SUSBCR_SBR_9600 0x0200 +#define SUSBCR_SBR_19200 0x0400 +#define SUSBCR_SBR_28800 0x0800 +#define SUSBCR_SBR_38400 0x1000 +#define SUSBCR_SBR_57600 0x2000 +#define SUSBCR_SBR_115200 0x4000 + +#define SUSBCR_SPASB_MASK 0x0070 +#define SUSBCR_SPASB_NoParity 0x0010 +#define SUSBCR_SPASB_OddParity 0x0020 +#define SUSBCR_SPASB_EvenParity 0x0040 + +#define SUSBCR_SPASB_STPMASK 0x0003 +#define SUSBCR_SPASB_1StopBit 0x0001 +#define SUSBCR_SPASB_2StopBits 0x0002 + +#define SUSBCRequest_SetStatusLinesOrQueues 2 +#define SUSBCR_SSL_SETRTS 0x0001 +#define SUSBCR_SSL_CLRRTS 0x0002 +#define SUSBCR_SSL_SETDTR 0x0004 +#define SUSBCR_SSL_CLRDTR 0x0010 + +/* Kill the pending/current writes to the comm port. */ +#define SUSBCR_SSL_PURGE_TXABORT 0x0100 +/* Kill the pending/current reads to the comm port. */ +#define SUSBCR_SSL_PURGE_RXABORT 0x0200 +/* Kill the transmit queue if there. */ +#define SUSBCR_SSL_PURGE_TXCLEAR 0x0400 +/* Kill the typeahead buffer if there. */ +#define SUSBCR_SSL_PURGE_RXCLEAR 0x0800 + +#define SUSBCRequest_GetStatusLineState 4 +/* Any Character received */ +#define SUSBCR_GSL_RXCHAR 0x0001 +/* Transmitt Queue Empty */ +#define SUSBCR_GSL_TXEMPTY 0x0004 +/* CTS changed state */ +#define SUSBCR_GSL_CTS 0x0008 +/* DSR changed state */ +#define SUSBCR_GSL_DSR 0x0010 +/* RLSD changed state */ +#define SUSBCR_GSL_RLSD 0x0020 +/* BREAK received */ +#define SUSBCR_GSL_BREAK 0x0040 +/* Line status error occurred */ +#define SUSBCR_GSL_ERR 0x0080 +/* Ring signal detected */ +#define SUSBCR_GSL_RING 0x0100 + +#define SUSBCRequest_Misc 8 +/* use a predefined reset sequence */ +#define SUSBCR_MSC_ResetReader 0x0001 +/* use a predefined sequence to reset the internal queues */ +#define SUSBCR_MSC_ResetAllQueues 0x0002 + +#define SUSBCRequest_GetMisc 0x10 + +/* + * get the firmware version from device, coded like this 0xHHLLBBPP with + * HH = Firmware Version High Byte + * LL = Firmware Version Low Byte + * BB = Build Number + * PP = Further Attributes + */ +#define SUSBCR_MSC_GetFWVersion 0x0001 + +/* + * get the hardware version from device coded like this 0xHHLLPPRR with + * HH = Software Version High Byte + * LL = Software Version Low Byte + * PP = Further Attributes + * RR = Reserved for the hardware ID + */ +#define SUSBCR_MSC_GetHWVersion 0x0002 -- cgit v1.2.3