From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/video/fbdev/xilinxfb.c | 510 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 510 insertions(+) create mode 100644 drivers/video/fbdev/xilinxfb.c (limited to 'drivers/video/fbdev/xilinxfb.c') diff --git a/drivers/video/fbdev/xilinxfb.c b/drivers/video/fbdev/xilinxfb.c new file mode 100644 index 000000000..1ac83900a --- /dev/null +++ b/drivers/video/fbdev/xilinxfb.c @@ -0,0 +1,510 @@ +/* + * Xilinx TFT frame buffer driver + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * 2002-2007 (c) MontaVista Software, Inc. + * 2007 (c) Secret Lab Technologies, Ltd. + * 2009 (c) Xilinx Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/* + * This driver was based on au1100fb.c by MontaVista rewritten for 2.6 + * by Embedded Alley Solutions , which in turn + * was based on skeletonfb.c, Skeleton for a frame buffer device by + * Geert Uytterhoeven. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_PPC_DCR +#include +#endif + +#define DRIVER_NAME "xilinxfb" + +/* + * Xilinx calls it "TFT LCD Controller" though it can also be used for + * the VGA port on the Xilinx ML40x board. This is a hardware display + * controller for a 640x480 resolution TFT or VGA screen. + * + * The interface to the framebuffer is nice and simple. There are two + * control registers. The first tells the LCD interface where in memory + * the frame buffer is (only the 11 most significant bits are used, so + * don't start thinking about scrolling). The second allows the LCD to + * be turned on or off as well as rotated 180 degrees. + * + * In case of direct BUS access the second control register will be at + * an offset of 4 as compared to the DCR access where the offset is 1 + * i.e. REG_CTRL. So this is taken care in the function + * xilinx_fb_out32 where it left shifts the offset 2 times in case of + * direct BUS access. + */ +#define NUM_REGS 2 +#define REG_FB_ADDR 0 +#define REG_CTRL 1 +#define REG_CTRL_ENABLE 0x0001 +#define REG_CTRL_ROTATE 0x0002 + +/* + * The hardware only handles a single mode: 640x480 24 bit true + * color. Each pixel gets a word (32 bits) of memory. Within each word, + * the 8 most significant bits are ignored, the next 8 bits are the red + * level, the next 8 bits are the green level and the 8 least + * significant bits are the blue level. Each row of the LCD uses 1024 + * words, but only the first 640 pixels are displayed with the other 384 + * words being ignored. There are 480 rows. + */ +#define BYTES_PER_PIXEL 4 +#define BITS_PER_PIXEL (BYTES_PER_PIXEL * 8) + +#define RED_SHIFT 16 +#define GREEN_SHIFT 8 +#define BLUE_SHIFT 0 + +#define PALETTE_ENTRIES_NO 16 /* passed to fb_alloc_cmap() */ + +/* ML300/403 reference design framebuffer driver platform data struct */ +struct xilinxfb_platform_data { + u32 rotate_screen; /* Flag to rotate display 180 degrees */ + u32 screen_height_mm; /* Physical dimensions of screen in mm */ + u32 screen_width_mm; + u32 xres, yres; /* resolution of screen in pixels */ + u32 xvirt, yvirt; /* resolution of memory buffer */ + + /* Physical address of framebuffer memory; If non-zero, driver + * will use provided memory address instead of allocating one from + * the consistent pool. + */ + u32 fb_phys; +}; + +/* + * Default xilinxfb configuration + */ +static const struct xilinxfb_platform_data xilinx_fb_default_pdata = { + .xres = 640, + .yres = 480, + .xvirt = 1024, + .yvirt = 480, +}; + +/* + * Here are the default fb_fix_screeninfo and fb_var_screeninfo structures + */ +static const struct fb_fix_screeninfo xilinx_fb_fix = { + .id = "Xilinx", + .type = FB_TYPE_PACKED_PIXELS, + .visual = FB_VISUAL_TRUECOLOR, + .accel = FB_ACCEL_NONE +}; + +static const struct fb_var_screeninfo xilinx_fb_var = { + .bits_per_pixel = BITS_PER_PIXEL, + + .red = { RED_SHIFT, 8, 0 }, + .green = { GREEN_SHIFT, 8, 0 }, + .blue = { BLUE_SHIFT, 8, 0 }, + .transp = { 0, 0, 0 }, + + .activate = FB_ACTIVATE_NOW +}; + +#define BUS_ACCESS_FLAG 0x1 /* 1 = BUS, 0 = DCR */ +#define LITTLE_ENDIAN_ACCESS 0x2 /* LITTLE ENDIAN IO functions */ + +struct xilinxfb_drvdata { + struct fb_info info; /* FB driver info record */ + + phys_addr_t regs_phys; /* phys. address of the control + * registers + */ + void __iomem *regs; /* virt. address of the control + * registers + */ +#ifdef CONFIG_PPC_DCR + dcr_host_t dcr_host; + unsigned int dcr_len; +#endif + void *fb_virt; /* virt. address of the frame buffer */ + dma_addr_t fb_phys; /* phys. address of the frame buffer */ + int fb_alloced; /* Flag, was the fb memory alloced? */ + + u8 flags; /* features of the driver */ + + u32 reg_ctrl_default; + + u32 pseudo_palette[PALETTE_ENTRIES_NO]; + /* Fake palette of 16 colors */ +}; + +#define to_xilinxfb_drvdata(_info) \ + container_of(_info, struct xilinxfb_drvdata, info) + +/* + * The XPS TFT Controller can be accessed through BUS or DCR interface. + * To perform the read/write on the registers we need to check on + * which bus its connected and call the appropriate write API. + */ +static void xilinx_fb_out32(struct xilinxfb_drvdata *drvdata, u32 offset, + u32 val) +{ + if (drvdata->flags & BUS_ACCESS_FLAG) { + if (drvdata->flags & LITTLE_ENDIAN_ACCESS) + iowrite32(val, drvdata->regs + (offset << 2)); + else + iowrite32be(val, drvdata->regs + (offset << 2)); + } +#ifdef CONFIG_PPC_DCR + else + dcr_write(drvdata->dcr_host, offset, val); +#endif +} + +static u32 xilinx_fb_in32(struct xilinxfb_drvdata *drvdata, u32 offset) +{ + if (drvdata->flags & BUS_ACCESS_FLAG) { + if (drvdata->flags & LITTLE_ENDIAN_ACCESS) + return ioread32(drvdata->regs + (offset << 2)); + else + return ioread32be(drvdata->regs + (offset << 2)); + } +#ifdef CONFIG_PPC_DCR + else + return dcr_read(drvdata->dcr_host, offset); +#endif + return 0; +} + +static int +xilinx_fb_setcolreg(unsigned int regno, unsigned int red, unsigned int green, + unsigned int blue, unsigned int transp, struct fb_info *fbi) +{ + u32 *palette = fbi->pseudo_palette; + + if (regno >= PALETTE_ENTRIES_NO) + return -EINVAL; + + if (fbi->var.grayscale) { + /* Convert color to grayscale. + * grayscale = 0.30*R + 0.59*G + 0.11*B + */ + blue = (red * 77 + green * 151 + blue * 28 + 127) >> 8; + green = blue; + red = green; + } + + /* fbi->fix.visual is always FB_VISUAL_TRUECOLOR */ + + /* We only handle 8 bits of each color. */ + red >>= 8; + green >>= 8; + blue >>= 8; + palette[regno] = (red << RED_SHIFT) | (green << GREEN_SHIFT) | + (blue << BLUE_SHIFT); + + return 0; +} + +static int +xilinx_fb_blank(int blank_mode, struct fb_info *fbi) +{ + struct xilinxfb_drvdata *drvdata = to_xilinxfb_drvdata(fbi); + + switch (blank_mode) { + case FB_BLANK_UNBLANK: + /* turn on panel */ + xilinx_fb_out32(drvdata, REG_CTRL, drvdata->reg_ctrl_default); + break; + + case FB_BLANK_NORMAL: + case FB_BLANK_VSYNC_SUSPEND: + case FB_BLANK_HSYNC_SUSPEND: + case FB_BLANK_POWERDOWN: + /* turn off panel */ + xilinx_fb_out32(drvdata, REG_CTRL, 0); + break; + + default: + break; + } + return 0; /* success */ +} + +static const struct fb_ops xilinxfb_ops = { + .owner = THIS_MODULE, + .fb_setcolreg = xilinx_fb_setcolreg, + .fb_blank = xilinx_fb_blank, + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, +}; + +/* --------------------------------------------------------------------- + * Bus independent setup/teardown + */ + +static int xilinxfb_assign(struct platform_device *pdev, + struct xilinxfb_drvdata *drvdata, + struct xilinxfb_platform_data *pdata) +{ + int rc; + struct device *dev = &pdev->dev; + int fbsize = pdata->xvirt * pdata->yvirt * BYTES_PER_PIXEL; + + if (drvdata->flags & BUS_ACCESS_FLAG) { + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + drvdata->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(drvdata->regs)) + return PTR_ERR(drvdata->regs); + + drvdata->regs_phys = res->start; + } + + /* Allocate the framebuffer memory */ + if (pdata->fb_phys) { + drvdata->fb_phys = pdata->fb_phys; + drvdata->fb_virt = ioremap(pdata->fb_phys, fbsize); + } else { + drvdata->fb_alloced = 1; + drvdata->fb_virt = dma_alloc_coherent(dev, PAGE_ALIGN(fbsize), + &drvdata->fb_phys, + GFP_KERNEL); + } + + if (!drvdata->fb_virt) { + dev_err(dev, "Could not allocate frame buffer memory\n"); + return -ENOMEM; + } + + /* Clear (turn to black) the framebuffer */ + memset_io((void __iomem *)drvdata->fb_virt, 0, fbsize); + + /* Tell the hardware where the frame buffer is */ + xilinx_fb_out32(drvdata, REG_FB_ADDR, drvdata->fb_phys); + rc = xilinx_fb_in32(drvdata, REG_FB_ADDR); + /* Endianness detection */ + if (rc != drvdata->fb_phys) { + drvdata->flags |= LITTLE_ENDIAN_ACCESS; + xilinx_fb_out32(drvdata, REG_FB_ADDR, drvdata->fb_phys); + } + + /* Turn on the display */ + drvdata->reg_ctrl_default = REG_CTRL_ENABLE; + if (pdata->rotate_screen) + drvdata->reg_ctrl_default |= REG_CTRL_ROTATE; + xilinx_fb_out32(drvdata, REG_CTRL, drvdata->reg_ctrl_default); + + /* Fill struct fb_info */ + drvdata->info.device = dev; + drvdata->info.screen_base = (void __iomem *)drvdata->fb_virt; + drvdata->info.fbops = &xilinxfb_ops; + drvdata->info.fix = xilinx_fb_fix; + drvdata->info.fix.smem_start = drvdata->fb_phys; + drvdata->info.fix.smem_len = fbsize; + drvdata->info.fix.line_length = pdata->xvirt * BYTES_PER_PIXEL; + + drvdata->info.pseudo_palette = drvdata->pseudo_palette; + drvdata->info.flags = FBINFO_DEFAULT; + drvdata->info.var = xilinx_fb_var; + drvdata->info.var.height = pdata->screen_height_mm; + drvdata->info.var.width = pdata->screen_width_mm; + drvdata->info.var.xres = pdata->xres; + drvdata->info.var.yres = pdata->yres; + drvdata->info.var.xres_virtual = pdata->xvirt; + drvdata->info.var.yres_virtual = pdata->yvirt; + + /* Allocate a colour map */ + rc = fb_alloc_cmap(&drvdata->info.cmap, PALETTE_ENTRIES_NO, 0); + if (rc) { + dev_err(dev, "Fail to allocate colormap (%d entries)\n", + PALETTE_ENTRIES_NO); + goto err_cmap; + } + + /* Register new frame buffer */ + rc = register_framebuffer(&drvdata->info); + if (rc) { + dev_err(dev, "Could not register frame buffer\n"); + goto err_regfb; + } + + if (drvdata->flags & BUS_ACCESS_FLAG) { + /* Put a banner in the log (for DEBUG) */ + dev_dbg(dev, "regs: phys=%pa, virt=%p\n", + &drvdata->regs_phys, drvdata->regs); + } + /* Put a banner in the log (for DEBUG) */ + dev_dbg(dev, "fb: phys=%llx, virt=%p, size=%x\n", + (unsigned long long)drvdata->fb_phys, drvdata->fb_virt, fbsize); + + return 0; /* success */ + +err_regfb: + fb_dealloc_cmap(&drvdata->info.cmap); + +err_cmap: + if (drvdata->fb_alloced) + dma_free_coherent(dev, PAGE_ALIGN(fbsize), drvdata->fb_virt, + drvdata->fb_phys); + else + iounmap(drvdata->fb_virt); + + /* Turn off the display */ + xilinx_fb_out32(drvdata, REG_CTRL, 0); + + return rc; +} + +static void xilinxfb_release(struct device *dev) +{ + struct xilinxfb_drvdata *drvdata = dev_get_drvdata(dev); + +#if !defined(CONFIG_FRAMEBUFFER_CONSOLE) && defined(CONFIG_LOGO) + xilinx_fb_blank(VESA_POWERDOWN, &drvdata->info); +#endif + + unregister_framebuffer(&drvdata->info); + + fb_dealloc_cmap(&drvdata->info.cmap); + + if (drvdata->fb_alloced) + dma_free_coherent(dev, PAGE_ALIGN(drvdata->info.fix.smem_len), + drvdata->fb_virt, drvdata->fb_phys); + else + iounmap(drvdata->fb_virt); + + /* Turn off the display */ + xilinx_fb_out32(drvdata, REG_CTRL, 0); + +#ifdef CONFIG_PPC_DCR + /* Release the resources, as allocated based on interface */ + if (!(drvdata->flags & BUS_ACCESS_FLAG)) + dcr_unmap(drvdata->dcr_host, drvdata->dcr_len); +#endif +} + +/* --------------------------------------------------------------------- + * OF bus binding + */ + +static int xilinxfb_of_probe(struct platform_device *pdev) +{ + const u32 *prop; + u32 tft_access = 0; + struct xilinxfb_platform_data pdata; + int size; + struct xilinxfb_drvdata *drvdata; + + /* Copy with the default pdata (not a ptr reference!) */ + pdata = xilinx_fb_default_pdata; + + /* Allocate the driver data region */ + drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL); + if (!drvdata) + return -ENOMEM; + + /* + * To check whether the core is connected directly to DCR or BUS + * interface and initialize the tft_access accordingly. + */ + of_property_read_u32(pdev->dev.of_node, "xlnx,dcr-splb-slave-if", + &tft_access); + + /* + * Fill the resource structure if its direct BUS interface + * otherwise fill the dcr_host structure. + */ + if (tft_access) + drvdata->flags |= BUS_ACCESS_FLAG; +#ifdef CONFIG_PPC_DCR + else { + int start; + + start = dcr_resource_start(pdev->dev.of_node, 0); + drvdata->dcr_len = dcr_resource_len(pdev->dev.of_node, 0); + drvdata->dcr_host = dcr_map(pdev->dev.of_node, start, drvdata->dcr_len); + if (!DCR_MAP_OK(drvdata->dcr_host)) { + dev_err(&pdev->dev, "invalid DCR address\n"); + return -ENODEV; + } + } +#endif + + prop = of_get_property(pdev->dev.of_node, "phys-size", &size); + if ((prop) && (size >= sizeof(u32) * 2)) { + pdata.screen_width_mm = prop[0]; + pdata.screen_height_mm = prop[1]; + } + + prop = of_get_property(pdev->dev.of_node, "resolution", &size); + if ((prop) && (size >= sizeof(u32) * 2)) { + pdata.xres = prop[0]; + pdata.yres = prop[1]; + } + + prop = of_get_property(pdev->dev.of_node, "virtual-resolution", &size); + if ((prop) && (size >= sizeof(u32) * 2)) { + pdata.xvirt = prop[0]; + pdata.yvirt = prop[1]; + } + + if (of_find_property(pdev->dev.of_node, "rotate-display", NULL)) + pdata.rotate_screen = 1; + + platform_set_drvdata(pdev, drvdata); + return xilinxfb_assign(pdev, drvdata, &pdata); +} + +static int xilinxfb_of_remove(struct platform_device *op) +{ + xilinxfb_release(&op->dev); + + return 0; +} + +/* Match table for of_platform binding */ +static const struct of_device_id xilinxfb_of_match[] = { + { .compatible = "xlnx,xps-tft-1.00.a", }, + { .compatible = "xlnx,xps-tft-2.00.a", }, + { .compatible = "xlnx,xps-tft-2.01.a", }, + { .compatible = "xlnx,plb-tft-cntlr-ref-1.00.a", }, + { .compatible = "xlnx,plb-dvi-cntlr-ref-1.00.c", }, + {}, +}; +MODULE_DEVICE_TABLE(of, xilinxfb_of_match); + +static struct platform_driver xilinxfb_of_driver = { + .probe = xilinxfb_of_probe, + .remove = xilinxfb_of_remove, + .driver = { + .name = DRIVER_NAME, + .of_match_table = xilinxfb_of_match, + }, +}; + +module_platform_driver(xilinxfb_of_driver); + +MODULE_AUTHOR("MontaVista Software, Inc. "); +MODULE_DESCRIPTION("Xilinx TFT frame buffer driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3