From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- kernel/trace/trace_hwlat.c | 891 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 891 insertions(+) create mode 100644 kernel/trace/trace_hwlat.c (limited to 'kernel/trace/trace_hwlat.c') diff --git a/kernel/trace/trace_hwlat.c b/kernel/trace/trace_hwlat.c new file mode 100644 index 000000000..b791524a6 --- /dev/null +++ b/kernel/trace/trace_hwlat.c @@ -0,0 +1,891 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * trace_hwlat.c - A simple Hardware Latency detector. + * + * Use this tracer to detect large system latencies induced by the behavior of + * certain underlying system hardware or firmware, independent of Linux itself. + * The code was developed originally to detect the presence of SMIs on Intel + * and AMD systems, although there is no dependency upon x86 herein. + * + * The classical example usage of this tracer is in detecting the presence of + * SMIs or System Management Interrupts on Intel and AMD systems. An SMI is a + * somewhat special form of hardware interrupt spawned from earlier CPU debug + * modes in which the (BIOS/EFI/etc.) firmware arranges for the South Bridge + * LPC (or other device) to generate a special interrupt under certain + * circumstances, for example, upon expiration of a special SMI timer device, + * due to certain external thermal readings, on certain I/O address accesses, + * and other situations. An SMI hits a special CPU pin, triggers a special + * SMI mode (complete with special memory map), and the OS is unaware. + * + * Although certain hardware-inducing latencies are necessary (for example, + * a modern system often requires an SMI handler for correct thermal control + * and remote management) they can wreak havoc upon any OS-level performance + * guarantees toward low-latency, especially when the OS is not even made + * aware of the presence of these interrupts. For this reason, we need a + * somewhat brute force mechanism to detect these interrupts. In this case, + * we do it by hogging all of the CPU(s) for configurable timer intervals, + * sampling the built-in CPU timer, looking for discontiguous readings. + * + * WARNING: This implementation necessarily introduces latencies. Therefore, + * you should NEVER use this tracer while running in a production + * environment requiring any kind of low-latency performance + * guarantee(s). + * + * Copyright (C) 2008-2009 Jon Masters, Red Hat, Inc. + * Copyright (C) 2013-2016 Steven Rostedt, Red Hat, Inc. + * + * Includes useful feedback from Clark Williams + * + */ +#include +#include +#include +#include +#include +#include +#include "trace.h" + +static struct trace_array *hwlat_trace; + +#define U64STR_SIZE 22 /* 20 digits max */ + +#define BANNER "hwlat_detector: " +#define DEFAULT_SAMPLE_WINDOW 1000000 /* 1s */ +#define DEFAULT_SAMPLE_WIDTH 500000 /* 0.5s */ +#define DEFAULT_LAT_THRESHOLD 10 /* 10us */ + +static struct dentry *hwlat_sample_width; /* sample width us */ +static struct dentry *hwlat_sample_window; /* sample window us */ +static struct dentry *hwlat_thread_mode; /* hwlat thread mode */ + +enum { + MODE_NONE = 0, + MODE_ROUND_ROBIN, + MODE_PER_CPU, + MODE_MAX +}; +static char *thread_mode_str[] = { "none", "round-robin", "per-cpu" }; + +/* Save the previous tracing_thresh value */ +static unsigned long save_tracing_thresh; + +/* runtime kthread data */ +struct hwlat_kthread_data { + struct task_struct *kthread; + /* NMI timestamp counters */ + u64 nmi_ts_start; + u64 nmi_total_ts; + int nmi_count; + int nmi_cpu; +}; + +static struct hwlat_kthread_data hwlat_single_cpu_data; +static DEFINE_PER_CPU(struct hwlat_kthread_data, hwlat_per_cpu_data); + +/* Tells NMIs to call back to the hwlat tracer to record timestamps */ +bool trace_hwlat_callback_enabled; + +/* If the user changed threshold, remember it */ +static u64 last_tracing_thresh = DEFAULT_LAT_THRESHOLD * NSEC_PER_USEC; + +/* Individual latency samples are stored here when detected. */ +struct hwlat_sample { + u64 seqnum; /* unique sequence */ + u64 duration; /* delta */ + u64 outer_duration; /* delta (outer loop) */ + u64 nmi_total_ts; /* Total time spent in NMIs */ + struct timespec64 timestamp; /* wall time */ + int nmi_count; /* # NMIs during this sample */ + int count; /* # of iterations over thresh */ +}; + +/* keep the global state somewhere. */ +static struct hwlat_data { + + struct mutex lock; /* protect changes */ + + u64 count; /* total since reset */ + + u64 sample_window; /* total sampling window (on+off) */ + u64 sample_width; /* active sampling portion of window */ + + int thread_mode; /* thread mode */ + +} hwlat_data = { + .sample_window = DEFAULT_SAMPLE_WINDOW, + .sample_width = DEFAULT_SAMPLE_WIDTH, + .thread_mode = MODE_ROUND_ROBIN +}; + +static struct hwlat_kthread_data *get_cpu_data(void) +{ + if (hwlat_data.thread_mode == MODE_PER_CPU) + return this_cpu_ptr(&hwlat_per_cpu_data); + else + return &hwlat_single_cpu_data; +} + +static bool hwlat_busy; + +static void trace_hwlat_sample(struct hwlat_sample *sample) +{ + struct trace_array *tr = hwlat_trace; + struct trace_event_call *call = &event_hwlat; + struct trace_buffer *buffer = tr->array_buffer.buffer; + struct ring_buffer_event *event; + struct hwlat_entry *entry; + + event = trace_buffer_lock_reserve(buffer, TRACE_HWLAT, sizeof(*entry), + tracing_gen_ctx()); + if (!event) + return; + entry = ring_buffer_event_data(event); + entry->seqnum = sample->seqnum; + entry->duration = sample->duration; + entry->outer_duration = sample->outer_duration; + entry->timestamp = sample->timestamp; + entry->nmi_total_ts = sample->nmi_total_ts; + entry->nmi_count = sample->nmi_count; + entry->count = sample->count; + + if (!call_filter_check_discard(call, entry, buffer, event)) + trace_buffer_unlock_commit_nostack(buffer, event); +} + +/* Macros to encapsulate the time capturing infrastructure */ +#define time_type u64 +#define time_get() trace_clock_local() +#define time_to_us(x) div_u64(x, 1000) +#define time_sub(a, b) ((a) - (b)) +#define init_time(a, b) (a = b) +#define time_u64(a) a + +void trace_hwlat_callback(bool enter) +{ + struct hwlat_kthread_data *kdata = get_cpu_data(); + + if (!kdata->kthread) + return; + + /* + * Currently trace_clock_local() calls sched_clock() and the + * generic version is not NMI safe. + */ + if (!IS_ENABLED(CONFIG_GENERIC_SCHED_CLOCK)) { + if (enter) + kdata->nmi_ts_start = time_get(); + else + kdata->nmi_total_ts += time_get() - kdata->nmi_ts_start; + } + + if (enter) + kdata->nmi_count++; +} + +/* + * hwlat_err - report a hwlat error. + */ +#define hwlat_err(msg) ({ \ + struct trace_array *tr = hwlat_trace; \ + \ + trace_array_printk_buf(tr->array_buffer.buffer, _THIS_IP_, msg); \ +}) + +/** + * get_sample - sample the CPU TSC and look for likely hardware latencies + * + * Used to repeatedly capture the CPU TSC (or similar), looking for potential + * hardware-induced latency. Called with interrupts disabled and with + * hwlat_data.lock held. + */ +static int get_sample(void) +{ + struct hwlat_kthread_data *kdata = get_cpu_data(); + struct trace_array *tr = hwlat_trace; + struct hwlat_sample s; + time_type start, t1, t2, last_t2; + s64 diff, outer_diff, total, last_total = 0; + u64 sample = 0; + u64 thresh = tracing_thresh; + u64 outer_sample = 0; + int ret = -1; + unsigned int count = 0; + + do_div(thresh, NSEC_PER_USEC); /* modifies interval value */ + + kdata->nmi_total_ts = 0; + kdata->nmi_count = 0; + /* Make sure NMIs see this first */ + barrier(); + + trace_hwlat_callback_enabled = true; + + init_time(last_t2, 0); + start = time_get(); /* start timestamp */ + outer_diff = 0; + + do { + + t1 = time_get(); /* we'll look for a discontinuity */ + t2 = time_get(); + + if (time_u64(last_t2)) { + /* Check the delta from outer loop (t2 to next t1) */ + outer_diff = time_to_us(time_sub(t1, last_t2)); + /* This shouldn't happen */ + if (outer_diff < 0) { + hwlat_err(BANNER "time running backwards\n"); + goto out; + } + if (outer_diff > outer_sample) + outer_sample = outer_diff; + } + last_t2 = t2; + + total = time_to_us(time_sub(t2, start)); /* sample width */ + + /* Check for possible overflows */ + if (total < last_total) { + hwlat_err("Time total overflowed\n"); + break; + } + last_total = total; + + /* This checks the inner loop (t1 to t2) */ + diff = time_to_us(time_sub(t2, t1)); /* current diff */ + + if (diff > thresh || outer_diff > thresh) { + if (!count) + ktime_get_real_ts64(&s.timestamp); + count++; + } + + /* This shouldn't happen */ + if (diff < 0) { + hwlat_err(BANNER "time running backwards\n"); + goto out; + } + + if (diff > sample) + sample = diff; /* only want highest value */ + + } while (total <= hwlat_data.sample_width); + + barrier(); /* finish the above in the view for NMIs */ + trace_hwlat_callback_enabled = false; + barrier(); /* Make sure nmi_total_ts is no longer updated */ + + ret = 0; + + /* If we exceed the threshold value, we have found a hardware latency */ + if (sample > thresh || outer_sample > thresh) { + u64 latency; + + ret = 1; + + /* We read in microseconds */ + if (kdata->nmi_total_ts) + do_div(kdata->nmi_total_ts, NSEC_PER_USEC); + + hwlat_data.count++; + s.seqnum = hwlat_data.count; + s.duration = sample; + s.outer_duration = outer_sample; + s.nmi_total_ts = kdata->nmi_total_ts; + s.nmi_count = kdata->nmi_count; + s.count = count; + trace_hwlat_sample(&s); + + latency = max(sample, outer_sample); + + /* Keep a running maximum ever recorded hardware latency */ + if (latency > tr->max_latency) { + tr->max_latency = latency; + latency_fsnotify(tr); + } + } + +out: + return ret; +} + +static struct cpumask save_cpumask; + +static void move_to_next_cpu(void) +{ + struct cpumask *current_mask = &save_cpumask; + struct trace_array *tr = hwlat_trace; + int next_cpu; + + /* + * If for some reason the user modifies the CPU affinity + * of this thread, then stop migrating for the duration + * of the current test. + */ + if (!cpumask_equal(current_mask, current->cpus_ptr)) + goto change_mode; + + cpus_read_lock(); + cpumask_and(current_mask, cpu_online_mask, tr->tracing_cpumask); + next_cpu = cpumask_next(raw_smp_processor_id(), current_mask); + cpus_read_unlock(); + + if (next_cpu >= nr_cpu_ids) + next_cpu = cpumask_first(current_mask); + + if (next_cpu >= nr_cpu_ids) /* Shouldn't happen! */ + goto change_mode; + + cpumask_clear(current_mask); + cpumask_set_cpu(next_cpu, current_mask); + + set_cpus_allowed_ptr(current, current_mask); + return; + + change_mode: + hwlat_data.thread_mode = MODE_NONE; + pr_info(BANNER "cpumask changed while in round-robin mode, switching to mode none\n"); +} + +/* + * kthread_fn - The CPU time sampling/hardware latency detection kernel thread + * + * Used to periodically sample the CPU TSC via a call to get_sample. We + * disable interrupts, which does (intentionally) introduce latency since we + * need to ensure nothing else might be running (and thus preempting). + * Obviously this should never be used in production environments. + * + * Executes one loop interaction on each CPU in tracing_cpumask sysfs file. + */ +static int kthread_fn(void *data) +{ + u64 interval; + + while (!kthread_should_stop()) { + + if (hwlat_data.thread_mode == MODE_ROUND_ROBIN) + move_to_next_cpu(); + + local_irq_disable(); + get_sample(); + local_irq_enable(); + + mutex_lock(&hwlat_data.lock); + interval = hwlat_data.sample_window - hwlat_data.sample_width; + mutex_unlock(&hwlat_data.lock); + + do_div(interval, USEC_PER_MSEC); /* modifies interval value */ + + /* Always sleep for at least 1ms */ + if (interval < 1) + interval = 1; + + if (msleep_interruptible(interval)) + break; + } + + return 0; +} + +/* + * stop_stop_kthread - Inform the hardware latency sampling/detector kthread to stop + * + * This kicks the running hardware latency sampling/detector kernel thread and + * tells it to stop sampling now. Use this on unload and at system shutdown. + */ +static void stop_single_kthread(void) +{ + struct hwlat_kthread_data *kdata = get_cpu_data(); + struct task_struct *kthread; + + cpus_read_lock(); + kthread = kdata->kthread; + + if (!kthread) + goto out_put_cpus; + + kthread_stop(kthread); + kdata->kthread = NULL; + +out_put_cpus: + cpus_read_unlock(); +} + + +/* + * start_single_kthread - Kick off the hardware latency sampling/detector kthread + * + * This starts the kernel thread that will sit and sample the CPU timestamp + * counter (TSC or similar) and look for potential hardware latencies. + */ +static int start_single_kthread(struct trace_array *tr) +{ + struct hwlat_kthread_data *kdata = get_cpu_data(); + struct cpumask *current_mask = &save_cpumask; + struct task_struct *kthread; + int next_cpu; + + cpus_read_lock(); + if (kdata->kthread) + goto out_put_cpus; + + kthread = kthread_create(kthread_fn, NULL, "hwlatd"); + if (IS_ERR(kthread)) { + pr_err(BANNER "could not start sampling thread\n"); + cpus_read_unlock(); + return -ENOMEM; + } + + /* Just pick the first CPU on first iteration */ + cpumask_and(current_mask, cpu_online_mask, tr->tracing_cpumask); + + if (hwlat_data.thread_mode == MODE_ROUND_ROBIN) { + next_cpu = cpumask_first(current_mask); + cpumask_clear(current_mask); + cpumask_set_cpu(next_cpu, current_mask); + + } + + set_cpus_allowed_ptr(kthread, current_mask); + + kdata->kthread = kthread; + wake_up_process(kthread); + +out_put_cpus: + cpus_read_unlock(); + return 0; +} + +/* + * stop_cpu_kthread - Stop a hwlat cpu kthread + */ +static void stop_cpu_kthread(unsigned int cpu) +{ + struct task_struct *kthread; + + kthread = per_cpu(hwlat_per_cpu_data, cpu).kthread; + if (kthread) + kthread_stop(kthread); + per_cpu(hwlat_per_cpu_data, cpu).kthread = NULL; +} + +/* + * stop_per_cpu_kthreads - Inform the hardware latency sampling/detector kthread to stop + * + * This kicks the running hardware latency sampling/detector kernel threads and + * tells it to stop sampling now. Use this on unload and at system shutdown. + */ +static void stop_per_cpu_kthreads(void) +{ + unsigned int cpu; + + cpus_read_lock(); + for_each_online_cpu(cpu) + stop_cpu_kthread(cpu); + cpus_read_unlock(); +} + +/* + * start_cpu_kthread - Start a hwlat cpu kthread + */ +static int start_cpu_kthread(unsigned int cpu) +{ + struct task_struct *kthread; + + /* Do not start a new hwlatd thread if it is already running */ + if (per_cpu(hwlat_per_cpu_data, cpu).kthread) + return 0; + + kthread = kthread_run_on_cpu(kthread_fn, NULL, cpu, "hwlatd/%u"); + if (IS_ERR(kthread)) { + pr_err(BANNER "could not start sampling thread\n"); + return -ENOMEM; + } + + per_cpu(hwlat_per_cpu_data, cpu).kthread = kthread; + + return 0; +} + +#ifdef CONFIG_HOTPLUG_CPU +static void hwlat_hotplug_workfn(struct work_struct *dummy) +{ + struct trace_array *tr = hwlat_trace; + unsigned int cpu = smp_processor_id(); + + mutex_lock(&trace_types_lock); + mutex_lock(&hwlat_data.lock); + cpus_read_lock(); + + if (!hwlat_busy || hwlat_data.thread_mode != MODE_PER_CPU) + goto out_unlock; + + if (!cpumask_test_cpu(cpu, tr->tracing_cpumask)) + goto out_unlock; + + start_cpu_kthread(cpu); + +out_unlock: + cpus_read_unlock(); + mutex_unlock(&hwlat_data.lock); + mutex_unlock(&trace_types_lock); +} + +static DECLARE_WORK(hwlat_hotplug_work, hwlat_hotplug_workfn); + +/* + * hwlat_cpu_init - CPU hotplug online callback function + */ +static int hwlat_cpu_init(unsigned int cpu) +{ + schedule_work_on(cpu, &hwlat_hotplug_work); + return 0; +} + +/* + * hwlat_cpu_die - CPU hotplug offline callback function + */ +static int hwlat_cpu_die(unsigned int cpu) +{ + stop_cpu_kthread(cpu); + return 0; +} + +static void hwlat_init_hotplug_support(void) +{ + int ret; + + ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "trace/hwlat:online", + hwlat_cpu_init, hwlat_cpu_die); + if (ret < 0) + pr_warn(BANNER "Error to init cpu hotplug support\n"); + + return; +} +#else /* CONFIG_HOTPLUG_CPU */ +static void hwlat_init_hotplug_support(void) +{ + return; +} +#endif /* CONFIG_HOTPLUG_CPU */ + +/* + * start_per_cpu_kthreads - Kick off the hardware latency sampling/detector kthreads + * + * This starts the kernel threads that will sit on potentially all cpus and + * sample the CPU timestamp counter (TSC or similar) and look for potential + * hardware latencies. + */ +static int start_per_cpu_kthreads(struct trace_array *tr) +{ + struct cpumask *current_mask = &save_cpumask; + unsigned int cpu; + int retval; + + cpus_read_lock(); + /* + * Run only on CPUs in which hwlat is allowed to run. + */ + cpumask_and(current_mask, cpu_online_mask, tr->tracing_cpumask); + + for_each_cpu(cpu, current_mask) { + retval = start_cpu_kthread(cpu); + if (retval) + goto out_error; + } + cpus_read_unlock(); + + return 0; + +out_error: + cpus_read_unlock(); + stop_per_cpu_kthreads(); + return retval; +} + +static void *s_mode_start(struct seq_file *s, loff_t *pos) +{ + int mode = *pos; + + mutex_lock(&hwlat_data.lock); + + if (mode >= MODE_MAX) + return NULL; + + return pos; +} + +static void *s_mode_next(struct seq_file *s, void *v, loff_t *pos) +{ + int mode = ++(*pos); + + if (mode >= MODE_MAX) + return NULL; + + return pos; +} + +static int s_mode_show(struct seq_file *s, void *v) +{ + loff_t *pos = v; + int mode = *pos; + + if (mode == hwlat_data.thread_mode) + seq_printf(s, "[%s]", thread_mode_str[mode]); + else + seq_printf(s, "%s", thread_mode_str[mode]); + + if (mode < MODE_MAX - 1) /* if mode is any but last */ + seq_puts(s, " "); + + return 0; +} + +static void s_mode_stop(struct seq_file *s, void *v) +{ + seq_puts(s, "\n"); + mutex_unlock(&hwlat_data.lock); +} + +static const struct seq_operations thread_mode_seq_ops = { + .start = s_mode_start, + .next = s_mode_next, + .show = s_mode_show, + .stop = s_mode_stop +}; + +static int hwlat_mode_open(struct inode *inode, struct file *file) +{ + return seq_open(file, &thread_mode_seq_ops); +}; + +static void hwlat_tracer_start(struct trace_array *tr); +static void hwlat_tracer_stop(struct trace_array *tr); + +/** + * hwlat_mode_write - Write function for "mode" entry + * @filp: The active open file structure + * @ubuf: The user buffer that contains the value to write + * @cnt: The maximum number of bytes to write to "file" + * @ppos: The current position in @file + * + * This function provides a write implementation for the "mode" interface + * to the hardware latency detector. hwlatd has different operation modes. + * The "none" sets the allowed cpumask for a single hwlatd thread at the + * startup and lets the scheduler handle the migration. The default mode is + * the "round-robin" one, in which a single hwlatd thread runs, migrating + * among the allowed CPUs in a round-robin fashion. The "per-cpu" mode + * creates one hwlatd thread per allowed CPU. + */ +static ssize_t hwlat_mode_write(struct file *filp, const char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + struct trace_array *tr = hwlat_trace; + const char *mode; + char buf[64]; + int ret, i; + + if (cnt >= sizeof(buf)) + return -EINVAL; + + if (copy_from_user(buf, ubuf, cnt)) + return -EFAULT; + + buf[cnt] = 0; + + mode = strstrip(buf); + + ret = -EINVAL; + + /* + * trace_types_lock is taken to avoid concurrency on start/stop + * and hwlat_busy. + */ + mutex_lock(&trace_types_lock); + if (hwlat_busy) + hwlat_tracer_stop(tr); + + mutex_lock(&hwlat_data.lock); + + for (i = 0; i < MODE_MAX; i++) { + if (strcmp(mode, thread_mode_str[i]) == 0) { + hwlat_data.thread_mode = i; + ret = cnt; + } + } + + mutex_unlock(&hwlat_data.lock); + + if (hwlat_busy) + hwlat_tracer_start(tr); + mutex_unlock(&trace_types_lock); + + *ppos += cnt; + + + + return ret; +} + +/* + * The width parameter is read/write using the generic trace_min_max_param + * method. The *val is protected by the hwlat_data lock and is upper + * bounded by the window parameter. + */ +static struct trace_min_max_param hwlat_width = { + .lock = &hwlat_data.lock, + .val = &hwlat_data.sample_width, + .max = &hwlat_data.sample_window, + .min = NULL, +}; + +/* + * The window parameter is read/write using the generic trace_min_max_param + * method. The *val is protected by the hwlat_data lock and is lower + * bounded by the width parameter. + */ +static struct trace_min_max_param hwlat_window = { + .lock = &hwlat_data.lock, + .val = &hwlat_data.sample_window, + .max = NULL, + .min = &hwlat_data.sample_width, +}; + +static const struct file_operations thread_mode_fops = { + .open = hwlat_mode_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, + .write = hwlat_mode_write +}; +/** + * init_tracefs - A function to initialize the tracefs interface files + * + * This function creates entries in tracefs for "hwlat_detector". + * It creates the hwlat_detector directory in the tracing directory, + * and within that directory is the count, width and window files to + * change and view those values. + */ +static int init_tracefs(void) +{ + int ret; + struct dentry *top_dir; + + ret = tracing_init_dentry(); + if (ret) + return -ENOMEM; + + top_dir = tracefs_create_dir("hwlat_detector", NULL); + if (!top_dir) + return -ENOMEM; + + hwlat_sample_window = tracefs_create_file("window", TRACE_MODE_WRITE, + top_dir, + &hwlat_window, + &trace_min_max_fops); + if (!hwlat_sample_window) + goto err; + + hwlat_sample_width = tracefs_create_file("width", TRACE_MODE_WRITE, + top_dir, + &hwlat_width, + &trace_min_max_fops); + if (!hwlat_sample_width) + goto err; + + hwlat_thread_mode = trace_create_file("mode", TRACE_MODE_WRITE, + top_dir, + NULL, + &thread_mode_fops); + if (!hwlat_thread_mode) + goto err; + + return 0; + + err: + tracefs_remove(top_dir); + return -ENOMEM; +} + +static void hwlat_tracer_start(struct trace_array *tr) +{ + int err; + + if (hwlat_data.thread_mode == MODE_PER_CPU) + err = start_per_cpu_kthreads(tr); + else + err = start_single_kthread(tr); + if (err) + pr_err(BANNER "Cannot start hwlat kthread\n"); +} + +static void hwlat_tracer_stop(struct trace_array *tr) +{ + if (hwlat_data.thread_mode == MODE_PER_CPU) + stop_per_cpu_kthreads(); + else + stop_single_kthread(); +} + +static int hwlat_tracer_init(struct trace_array *tr) +{ + /* Only allow one instance to enable this */ + if (hwlat_busy) + return -EBUSY; + + hwlat_trace = tr; + + hwlat_data.count = 0; + tr->max_latency = 0; + save_tracing_thresh = tracing_thresh; + + /* tracing_thresh is in nsecs, we speak in usecs */ + if (!tracing_thresh) + tracing_thresh = last_tracing_thresh; + + if (tracer_tracing_is_on(tr)) + hwlat_tracer_start(tr); + + hwlat_busy = true; + + return 0; +} + +static void hwlat_tracer_reset(struct trace_array *tr) +{ + hwlat_tracer_stop(tr); + + /* the tracing threshold is static between runs */ + last_tracing_thresh = tracing_thresh; + + tracing_thresh = save_tracing_thresh; + hwlat_busy = false; +} + +static struct tracer hwlat_tracer __read_mostly = +{ + .name = "hwlat", + .init = hwlat_tracer_init, + .reset = hwlat_tracer_reset, + .start = hwlat_tracer_start, + .stop = hwlat_tracer_stop, + .allow_instances = true, +}; + +__init static int init_hwlat_tracer(void) +{ + int ret; + + mutex_init(&hwlat_data.lock); + + ret = register_tracer(&hwlat_tracer); + if (ret) + return ret; + + hwlat_init_hotplug_support(); + + init_tracefs(); + + return 0; +} +late_initcall(init_hwlat_tracer); -- cgit v1.2.3