From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- samples/pktgen/functions.sh | 339 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 339 insertions(+) create mode 100644 samples/pktgen/functions.sh (limited to 'samples/pktgen/functions.sh') diff --git a/samples/pktgen/functions.sh b/samples/pktgen/functions.sh new file mode 100644 index 000000000..933194257 --- /dev/null +++ b/samples/pktgen/functions.sh @@ -0,0 +1,339 @@ +# +# Common functions used by pktgen scripts +# - Depending on bash 3 (or higher) syntax +# +# Author: Jesper Dangaaard Brouer +# License: GPL + +set -o errexit + +## -- General shell logging cmds -- +function err() { + local exitcode=$1 + shift + echo "ERROR: $@" >&2 + exit $exitcode +} + +function warn() { + echo "WARN : $@" >&2 +} + +function info() { + if [[ -n "$VERBOSE" ]]; then + echo "INFO : $@" >&2 + fi +} + +## -- Pktgen proc config commands -- ## +export PROC_DIR=/proc/net/pktgen +# +# Three different shell functions for configuring the different +# components of pktgen: +# pg_ctrl(), pg_thread() and pg_set(). +# +# These functions correspond to pktgens different components. +# * pg_ctrl() control "pgctrl" (/proc/net/pktgen/pgctrl) +# * pg_thread() control the kernel threads and binding to devices +# * pg_set() control setup of individual devices +function pg_ctrl() { + local proc_file="pgctrl" + proc_cmd ${proc_file} "$@" +} + +function pg_thread() { + local thread=$1 + local proc_file="kpktgend_${thread}" + shift + proc_cmd ${proc_file} "$@" +} + +function pg_set() { + local dev=$1 + local proc_file="$dev" + shift + proc_cmd ${proc_file} "$@" +} + +# More generic replacement for pgset(), that does not depend on global +# variable for proc file. +function proc_cmd() { + local result + local proc_file=$1 + local status=0 + # after shift, the remaining args are contained in $@ + shift + local proc_ctrl=${PROC_DIR}/$proc_file + if [[ ! -e "$proc_ctrl" ]]; then + err 3 "proc file:$proc_ctrl does not exists (dev added to thread?)" + else + if [[ ! -w "$proc_ctrl" ]]; then + err 4 "proc file:$proc_ctrl not writable, not root?!" + fi + fi + + if [[ "$DEBUG" == "yes" ]]; then + echo "cmd: $@ > $proc_ctrl" + fi + # Quoting of "$@" is important for space expansion + echo "$@" > "$proc_ctrl" || status=$? + + if [[ "$proc_file" != "pgctrl" ]]; then + result=$(grep "Result: OK:" $proc_ctrl) || true + if [[ "$result" == "" ]]; then + grep "Result:" $proc_ctrl >&2 + fi + fi + if (( $status != 0 )); then + err 5 "Write error($status) occurred cmd: \"$@ > $proc_ctrl\"" + fi +} + +# Old obsolete "pgset" function, with slightly improved err handling +function pgset() { + local result + + if [[ "$DEBUG" == "yes" ]]; then + echo "cmd: $1 > $PGDEV" + fi + echo $1 > $PGDEV + local status=$? + + result=`cat $PGDEV | fgrep "Result: OK:"` + if [[ "$result" == "" ]]; then + cat $PGDEV | fgrep Result: + fi + if (( $status != 0 )); then + err 5 "Write error($status) occurred cmd: \"$1 > $PGDEV\"" + fi +} + +if [[ -z "$APPEND" ]]; then + if [[ $EUID -eq 0 ]]; then + # Cleanup pktgen setup on exit if thats not "append mode" + trap 'pg_ctrl "reset"' EXIT + fi +fi + +## -- General shell tricks -- + +function root_check_run_with_sudo() { + # Trick so, program can be run as normal user, will just use "sudo" + # call as root_check_run_as_sudo "$@" + if [ "$EUID" -ne 0 ]; then + if [ -x $0 ]; then # Directly executable use sudo + info "Not root, running with sudo" + sudo -E "$0" "$@" + exit $? + fi + err 4 "cannot perform sudo run of $0" + fi +} + +# Exact input device's NUMA node info +function get_iface_node() +{ + local node=$( fe80:0:0:0:42:bcff:fe84:e10a +function extend_addr6() +{ + local addr=$1 + local sep=: sep2=:: + local sep_cnt=$(tr -cd $sep <<< $1 | wc -c) + local shrink + + # separator count should be (2 <= $sep_cnt <= 7) + if ! (in_between $sep_cnt 2 7); then + err 5 "Invalid IP6 address: $1" + fi + + # if shrink '::' occurs multiple, it's malformed. + shrink=( $(egrep -o "$sep{2,}" <<< $addr) ) + if [[ ${#shrink[@]} -ne 0 ]]; then + if [[ ${#shrink[@]} -gt 1 || ( ${shrink[0]} != $sep2 ) ]]; then + err 5 "Invalid IP6 address: $1" + fi + fi + + # add 0 at begin & end, and extend addr by adding :0 + [[ ${addr:0:1} == $sep ]] && addr=0${addr} + [[ ${addr: -1} == $sep ]] && addr=${addr}0 + echo "${addr/$sep2/$(printf ':0%.s' $(seq $[8-sep_cnt])):}" +} + +# Given a single IP(v4/v6) address, whether it is valid. +function validate_addr() +{ + # check function is called with (funcname)6 + [[ ${FUNCNAME[1]: -1} == 6 ]] && local IP6=6 + local bitlen=$[ IP6 ? 128 : 32 ] + local len=$[ IP6 ? 8 : 4 ] + local max=$[ 2**(len*2)-1 ] + local net prefix + local addr sep + + IFS='/' read net prefix <<< $1 + [[ $IP6 ]] && net=$(extend_addr6 $net) + + # if prefix exists, check (0 <= $prefix <= $bitlen) + if [[ -n $prefix ]]; then + if ! (in_between $prefix 0 $bitlen); then + err 5 "Invalid prefix: /$prefix" + fi + fi + + # set separator for each IP(v4/v6) + [[ $IP6 ]] && sep=: || sep=. + IFS=$sep read -a addr <<< $net + + # array length + if [[ ${#addr[@]} != $len ]]; then + err 5 "Invalid IP$IP6 address: $1" + fi + + # check each digit (0 <= $digit <= $max) + for digit in "${addr[@]}"; do + [[ $IP6 ]] && digit=$[ 16#$digit ] + if ! (in_between $digit 0 $max); then + err 5 "Invalid IP$IP6 address: $1" + fi + done + + return 0 +} + +function validate_addr6() { validate_addr $@ ; } + +# Given a single IP(v4/v6) or CIDR, return minimum and maximum IP addr. +function parse_addr() +{ + # check function is called with (funcname)6 + [[ ${FUNCNAME[1]: -1} == 6 ]] && local IP6=6 + local net prefix + local min_ip max_ip + + IFS='/' read net prefix <<< $1 + [[ $IP6 ]] && net=$(extend_addr6 $net) + + if [[ -z $prefix ]]; then + min_ip=$net + max_ip=$net + else + # defining array for converting Decimal 2 Binary + # 00000000 00000001 00000010 00000011 00000100 ... + local d2b='{0..1}{0..1}{0..1}{0..1}{0..1}{0..1}{0..1}{0..1}' + [[ $IP6 ]] && d2b+=$d2b + eval local D2B=($d2b) + + local bitlen=$[ IP6 ? 128 : 32 ] + local remain=$[ bitlen-prefix ] + local octet=$[ IP6 ? 16 : 8 ] + local min_mask max_mask + local min max + local ip_bit + local ip sep + + # set separator for each IP(v4/v6) + [[ $IP6 ]] && sep=: || sep=. + IFS=$sep read -ra ip <<< $net + + min_mask="$(printf '1%.s' $(seq $prefix))$(printf '0%.s' $(seq $remain))" + max_mask="$(printf '0%.s' $(seq $prefix))$(printf '1%.s' $(seq $remain))" + + # calculate min/max ip with &,| operator + for i in "${!ip[@]}"; do + digit=$[ IP6 ? 16#${ip[$i]} : ${ip[$i]} ] + ip_bit=${D2B[$digit]} + + idx=$[ octet*i ] + min[$i]=$[ 2#$ip_bit & 2#${min_mask:$idx:$octet} ] + max[$i]=$[ 2#$ip_bit | 2#${max_mask:$idx:$octet} ] + [[ $IP6 ]] && { min[$i]=$(printf '%X' ${min[$i]}); + max[$i]=$(printf '%X' ${max[$i]}); } + done + + min_ip=$(IFS=$sep; echo "${min[*]}") + max_ip=$(IFS=$sep; echo "${max[*]}") + fi + + echo $min_ip $max_ip +} + +function parse_addr6() { parse_addr $@ ; } + +# Given a single or range of port(s), return minimum and maximum port number. +function parse_ports() +{ + local port_str=$1 + local port_list + local min_port + local max_port + + IFS="-" read -ra port_list <<< $port_str + + min_port=${port_list[0]} + max_port=${port_list[1]:-$min_port} + + echo $min_port $max_port +} + +# Given a minimum and maximum port, verify port number. +function validate_ports() +{ + local min_port=$1 + local max_port=$2 + + # 1 <= port <= 65535 + if (in_between $min_port 1 65535); then + if (in_between $max_port 1 65535); then + if [[ $min_port -le $max_port ]]; then + return 0 + fi + fi + fi + + err 5 "Invalid port(s): $min_port-$max_port" +} -- cgit v1.2.3