From ae5d181b854d3ccb373b6bc01b4869e44ff4d87a Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 18:37:15 +0200 Subject: Adding upstream version 2.9.0dev.12. Signed-off-by: Daniel Baumann --- PROBLEMS | 258 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 258 insertions(+) create mode 100644 PROBLEMS (limited to 'PROBLEMS') diff --git a/PROBLEMS b/PROBLEMS new file mode 100644 index 0000000..621ccc1 --- /dev/null +++ b/PROBLEMS @@ -0,0 +1,258 @@ +Lynx PROBLEMS file. + +Ideally you would never have to read this, but inevitably problems +do arise. As implementation and installation problems become known +they will be outlined in this file. + +--------- + + The install script will attempt to preserve your current settings in the + lynx.cfg file. You should review these (at the end of lynx.cfg) after + install. For instance references to lynx.browser.org for a startfile can + be removed, since that site is no longer maintained. + +--------- + + Some customized installs of OpenSSL are not detected by the configure + script. For example, with Redhat9, we did this to work around: + + #!/bin/sh + KRB=/usr/kerberos + export LIBS="-L$KRB/lib -lssl -lcrypto -lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err" + export CPPFLAGS="-I$KRB/include -I/usr/include/openssl" + export CFLAGS="-O -g $CPPFLAGS" + ./configure --with-ssl $* + +--------- + + The configure script check for IPv6 (--enable-ipv6) assumes that your build + machine can listen for IPv6 connections. It cannot determine if you want + to use it only for outgoing connections. If the configure script is + otherwise successful, it will warn about a nonfunctioning getaddrinfo() + function, and does not define these symbols needed to successfully compile + IPv6 support. You can work around this by by editing lynx_cfg.h: + + HAVE_GAI_STRERROR + HAVE_GETADDRINFO + +--------- + + Control-Z on Unix can cause aberrant behavior. If you encounter + problems, use -restrictions=suspend to disable it, and only '!' + for escapes to shell (on VMS control-Z is unconditional 'Q'uit, + with no attempt to suspend the Lynx process only temporarily). + Control-Z on Unix often works better with slang. + +--------- + + Screen resizing can be a bit funny. If you resize the screen, + documents that have been cached will be out of whack. Any further + documents will look fine. You can reload documents to the current + window size with CTRL-R + +--------- + + If the configure script dies when it discovers that gcc is broken, + despite the fact there is a perfectly good ANSI cc in the PATH, + try setting the CC environment variable to your working cc compiler + before running configure: e.g. + + setenv CC cc (or set CC=cc; export CC , depending on the shell) + ./configure + +--------- + + If you run into a problem compiling GridText.c, try omitting -O from the + compiler flags; it is a very big file and may not compile successfully + if you include optimization. + +--------- + + On a Sun system, the message: + "Alert!: Unable to connect to remote host" + will be displayed every time an attempt is made to access a host + other than localhost if Lynx has been built without the resolv + library and needed it, or with it and shouldn't have been. + Unfortunately, there's no way to check in the Makefile whether + -lresolv should be included in the LIBS="" list. What's necessary + depends on how that Sun is configured. To get the build right for + your SUN 3 or 4 OS, if you didn't have RESOLVLIB defined in the + Makefile define it and build Lynx again, or vice versa. Also, if + you have upgraded to the bind-8.1 or later library, you should try + changing -lresolv to -lbind. + +--------- + + On Sun systems when accessing sites that use multiple IPs for one URL, + you may experience a core dump. It's a bug in the resolver library, + which can be fixed by downloading & installing Sun's jumbo patch: + search Sun support information, e.g., Solaris newsgroups, + or see the following Lynx Archive items: + + http://www.flora.org/lynx-dev/lynx-dev/9606/0422.html + http://www.flora.org/lynx-dev/html/month0497/msg01018.html + http://www.flora.org/lynx-dev/html/month0497/msg01064.html + + The Sun `shelltool' and `cmdtool' terminals are stupid by default. + In order to get bold text to appear differently than inverse video, + the user should put this line in ~/.Xdefaults: + + Term*boldStyle: Offset_X + + From the `shelltool' man page, it seems that an analogous line + in ~/.defaults + + /Tty/Bold_style "Offset_X" + + ought to work just as well, but you may not get the desired + behavior until you modify your .Xdefaults file (and run `xrdb + ~/.Xdefaults'). Note also that there are other supported values + for the boldStyle resource/Bold_style default, all of which begin + with "Offset_". (helpful hint from kevin@traffic.den.mmc.com) + +--------- + + Directory browsing has been implemented for VMS, but there are no + plans to port additional DIRED support, because Lynx must handle files + as streams, and this precludes "serious" Directory/File Management on + VMS. Use a jumps file link to CSwing (sources or executables are + available from ftp://narnia.memst.edu), or define CSWING_PATH in + userdefs.h or lynx.cfg to invoke CSwing via the DIRED_MENU command. + +--------- + + If one switches between K)eypad "Numbers act as arrows" versus "Links + are numbered" in the 'o'ptions menu when the current document is a + DIRED menu in which links have been tagged, the tagging can be trashed + (so don't switch at such times 8-). + +--------- + + When "Links are numbered" is on, if a line is split on an anchor (to + obey right margin restrictions), and there is no space in the bolded + string such that the entire "[#]string" must be moved down, the "[#]" + becomes bolded, instead on only "string". + +--------- + + The Mosaic v2.5 hostlist uses HTML similar to that of Lynx's bookmark + file, but with at the bottom, such that it is not fully + compatible with Lynx's file. If you try to use the Mosaic file as if + it were a Lynx bookmark file, the will not be taken into + account and new links will be added below rather than above those end + tags. Instead, add a link to the Mosaic file in your Lynx file, and + to the Lynx file in your Mosaic file, so that you can access both files + with both clients. + +--------- + + SOCKSification and the -socks switch have not yet been integrated with + the slang library support. + +--------- + + There is an apparently broken version of select() in libcurses.a + of HP/UX 10.10. It also breaks tn3270, ncftp, emacs, and xemacs. + Using: + LIBS="-lc -lcurses -ltermcap \ + ^^^ + (i.e, adding -lc *before* the -lcurses) in the snake3 and snake3-slang + targets of the top level Makefile yields a usable image, but with + inappropriate video attributes on the Lynx displays (reverse video and + underscores on everything). Using "-lc -lHcurses" instead fixes the + ^^^^^^^^^ + video attributes but then the arrow keys are messed up. - Donald S. + Teiser (dsteis01@homer.louisville.edu) + NOTE: If HP fixes the problem or you come up with a better workaround, + notify the lynx-dev@nongnu.org list. + Updated NOTE (1996-09-02): A patch reportedly is available from HP to + fix the select() problem, so that "-lc" is no longer needed, but + the curses glitch is not yet fixed, and you should still include + "-lHcurses". + Updated NOTE (1997-02-03): The problems reportedly are fixed with + patches PHCO_8086 and PHCO_8947 from HP. + Updated NOTE (1997-12-15): PHCO_8086 & PHCO_8947 are very old and are + no longer available. The current patch to install if running + under HP-UX 10.20 is PHCO_11342. + +--------- + + Lynx juggles variable abilities of curses packages or emulations to + display bolding and underlining simultaneously. This may fail if + Lynx thinks that your terminal, in connection with the curses package, + supports a capability which the terminal hardware or emulation does not + in fact support. Setting the right TERM environment variable, tweaking + terminfo or termcap files, or compiling with a newer version of ncurses + or slang may solve problems with missing highlighting or strange + characters appearing on the screen. Also, for a mono terminal, + make sure "show color" is not set to ON in the Options Menu. + + The Wyse 50 and older TeleVideo terminals, among others, are + "magic cookie" terminals. This means that display attributes like + reverse, blink, underline, etc. work in a bizarre way that makes them + difficult to program. You may see extra spaces scattered around your + screen (separating different sorts of highlight); or sections of the + screen may be unexpectedly highlighted. + There is a workaround which works by restricting the terminal to a + single standout attribute (e.g., normal and reverse, but no others). + Implementing the workaround is specific to your curses implementation. + Most versions of curses use one of two terminal databases, called + "termcap" and "terminfo". Updating these databases is system-specific. + New databases should be available from the vendor or other sources. + For the Wyse 50, try + ; + extract the "wy50" (NOT "wy50-mc") entry and use that in place of the + existing one. See `terminfo', `infocmp', `tic' etc. man pages if + necessary. + Alternatively, compiling Lynx with the slang library may avoid problems + with these terminals. + + The Sun console driver (aka wscons(7)) implements "reverse" and "bold" + as "reverse", causing confusion where Lynx uses the distinction between + the two to convey information. Lynx tries to detect this automatically, + but if it fails (for instance, you are running under "screen"), try + setting the -noreverse commandline option. + +--------- + + On VMS, Lynx, and other TCP-IP software, have been experiencing chronic + problems of incompatibilities between DECC and MultiNet headers whenever + new versions of either DECC or MultiNet are released. The Lynx build + procedure for VMS and a maze of spaghetti #ifdef-ing in tcp.h of the + libwww-FM had previously been successful in dealing with this problem + across all versions of MultiNet and of DECC, VAXC, and Pat Rankin's + VMS port of GNUC, but are now not 100% successful. If you get compiler + messages about "struct timeval timeout" having no linkage, add that + declaration immediately below the inclusion of ioctl.h for MultiNet in + tcp.h (by deleting the "#ifdef NOT_DEFINED" and "#endif /* NOT_DEFINED */" + lines): + [...] + #include "multinet_root:[multinet.include.sys]ioctl.h" + struct timeval { + long tv_sec; /* seconds since Jan. 1, 1970 */ + long tv_usec; /* microseconds */ + }; + [...] + If you get compiler warnings about incompatible multinet_foo() + declarations, delete those where indicated in tcp.h. For the most + current versions of MultiNet, you can modify tcp.h to use the DECC + socket and related headers. + + On VMS, the ftp function does not work with SOCKETSHR 0.9D and NETLIB + 2 (NETLIB 1 may work). This is because the functions getsockname() + and getpeername() within SOCKETSHR make incorrect calls to the NETLIB + functions. This results in zeroes being returned for part of the local + IP address. Since ftp sends this IP address to the remote end, the + remote server ends up sending a file back to a non-existent address. + Andy Harper (A.HARPER@kcl.ac.uk) has fixed these problems in the + SOCKETSHR 0.9D sources and offers the fixes as: + http://alder.cc.kcl.ac.uk/fileserv/zip/socketshr_src_09d-2.zip + ftp://ftp2.kcl.ac.uk/zip/socketshr_src_09d-2.zip + +--------- + + On VMS, to build an SSL-capable version, lynx and the ssl library + e.g., OpenSSL, must be built using the same network library. If you + build OpenSSL without specifying the network library (the 5th parameter + of the makevms.com script), it will guess, possibly not the one you + intended. We have tested only the UCX configuration -TD (2002/9/15). -- cgit v1.2.3