From ae5d181b854d3ccb373b6bc01b4869e44ff4d87a Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 18:37:15 +0200 Subject: Adding upstream version 2.9.0dev.12. Signed-off-by: Daniel Baumann --- samples/mailcap | 99 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 99 insertions(+) create mode 100644 samples/mailcap (limited to 'samples/mailcap') diff --git a/samples/mailcap b/samples/mailcap new file mode 100644 index 0000000..8f47338 --- /dev/null +++ b/samples/mailcap @@ -0,0 +1,99 @@ +# Copyright (c) 1991 Bell Communications Research, Inc. (Bellcore) +# +# Permission to use, copy, modify, and distribute this material +# for any purpose and without fee is hereby granted, provided +# that the above copyright notice and this permission notice +# appear in all copies, and that the name of Bellcore not be +# used in advertising or publicity pertaining to this +# material without the specific, prior written permission +# of an authorized representative of Bellcore. BELLCORE +# MAKES NO REPRESENTATIONS ABOUT THE ACCURACY OR SUITABILITY +# OF THIS MATERIAL FOR ANY PURPOSE. IT IS PROVIDED "AS IS", +# WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES. +# +# Prototype Mailcap file +# Note that support for text & multipart are "built in" to metamail, +# as are rudimentary support for message, and application. +# However, any of these may be overridden in mailcap. +# +# Note that users may override or extend this with a .mailcap +# file in their own directory. However, there is NO NEED +# for them to copy entries from this file, as metamail will +# pick up entries from both the system and personal mailcap files. +# + +# NOTE: This file has been heavily modified for use as an example +# configuration file for Lynx + +# In the samples given test=test -n "$DISPLAY" is used to +# determine if the current session is X capable by checking +# for the existence of a DISPLAY environment variable. +# Lynx actually uses a getenv() call for DISPLAY (DECW$DISPLAY +# on VMS) when it encounters test=test -n "$DISPLAY" or +# test=test -z "$DISPLAY" in a viewer assignment, instead of +# spawning to execute "test" via a system() call, i.e., those +# two strings, respectively, are handled equivalently to the +# :XWINDOWS and :NON_XWINDOWS flags for VIEWER: assignments +# in lynx.cfg. Any system without the DISPLAY (or DECW$DISPLAY) +# environment variable will be assumed to be Non-X. + +# You can append a ';' followed by "q=#.#", e.g., ; q=0.002 +# to set the quality parameter for the Content-Type, which can be +# included in the Accept: header Lynx sends to http servers (the +# default quality value is 1.0, and Lynx appends the parameter +# to the Content-Type only if the value is less than 1.0). + +# You can append a ';' followed by "mxb=#", e.g., ; mxb=1000000 +# to set the maxbytes parameter for the Content-Type, which can be +# included in the Accept: header Lynx sends to http servers (the +# default maxbytes value is 0, meaning no maximum, and Lynx appends +# the parameter to the Content-Type only if the value exceeds 0). + +# The following line is for sites where xv understands jpeg but xloadimage +# is preferred. +# +# the test line specifies that this viewer should only be used if +# the display variable is set. +image/jpeg; xv %s; test=test -n "$DISPLAY" + +# The following sends all other image subtypes to xloadimage +#image/*; xloadimage %s; ; test=test -n "$DISPLAY" + +# The following sends all other image subtypes to xv +image/*; xv %s; ; test=test -n "$DISPLAY" + + +# If you have an interactive Postscript interpreter, you should think carefully +# before replacing lpr with it in the following line, because PostScript +# can be an enormous security hole. It is RELATIVELY harmless +# when sent to the printer... + +# This one is for NON-X +#application/postscript; lpr %s \; echo SENT FILE TO PRINTER; ;test=test -z "$DISPLAY" + +# This one is for X. It's already the default via src/HTInit.c. +#application/postscript; ghostview %s; ; test=test -n "$DISPLAY" + +# The following should be commented out if you do NOT have safe-tcl +# and should be uncommented if you DO have safe-tcl +#application/safe-tcl; swish -safe -messaging -f %s + +# A common problem with the mailcap mechanism is getting differential +# behavior from different programs. This problem is compounded by the fact +# that some programs, notably Mosaic, do not implement the "test" clause in +# mailcap files. If you are using Lynx and X Mosaic together you should +# place all X-centric entries before non-X entries. X Mosaic will use +# whichever entry is defined first so further entries will be ignored. +# +# Lynx exports the environment variable LYNX_VERSION, so it can be tested +# by scripts to determine if Lynx is running or not. However, the string +# test=test -n "$LYNX_VERSION" +# is handled simply as a flag which yields success when Lynx encounters it +# in the mailcap file (i.e., Lynx does not bother to execute "test" via a +# system() call to find out if it's running, because it obviously is). +# Inclusion of the string for that test can be used to prevent other +# software which reads the mailcap file from acting on assignments intended +# only for Lynx. The string +# test=test -z "$LYNX_VERSION" +# similarly is treated by Lynx simply as a flag which yields failure. + -- cgit v1.2.3