diff options
Diffstat (limited to '')
| -rw-r--r-- | doc/lzip.texi | 1783 |
1 files changed, 1783 insertions, 0 deletions
diff --git a/doc/lzip.texi b/doc/lzip.texi new file mode 100644 index 0000000..144b525 --- /dev/null +++ b/doc/lzip.texi @@ -0,0 +1,1783 @@ +\input texinfo @c -*-texinfo-*- +@c %**start of header +@setfilename lzip.info +@documentencoding ISO-8859-15 +@settitle Lzip Manual +@finalout +@c %**end of header + +@set UPDATED 24 January 2022 +@set VERSION 1.23 + +@dircategory Compression +@direntry +* Lzip: (lzip). LZMA lossless data compressor +@end direntry + + +@ifnothtml +@titlepage +@title Lzip +@subtitle LZMA lossless data compressor +@subtitle for Lzip version @value{VERSION}, @value{UPDATED} +@author by Antonio Diaz Diaz + +@page +@vskip 0pt plus 1filll +@end titlepage + +@contents +@end ifnothtml + +@ifnottex +@node Top +@top + +This manual is for Lzip (version @value{VERSION}, @value{UPDATED}). + +@menu +* Introduction:: Purpose and features of lzip +* Output:: Meaning of lzip's output +* Invoking lzip:: Command line interface +* Quality assurance:: Design, development, and testing of lzip +* Algorithm:: How lzip compresses the data +* File format:: Detailed format of the compressed file +* Stream format:: Format of the LZMA stream in lzip files +* Trailing data:: Extra data appended to the file +* Examples:: A small tutorial with examples +* Problems:: Reporting bugs +* Reference source code:: Source code illustrating stream format +* Concept index:: Index of concepts +@end menu + +@sp 1 +Copyright @copyright{} 2008-2022 Antonio Diaz Diaz. + +This manual is free documentation: you have unlimited permission to copy, +distribute, and modify it. +@end ifnottex + + +@node Introduction +@chapter Introduction +@cindex introduction + +@uref{http://www.nongnu.org/lzip/lzip.html,,Lzip} +is a lossless data compressor with a user interface similar to the one +of gzip or bzip2. Lzip uses a simplified form of the 'Lempel-Ziv-Markov +chain-Algorithm' (LZMA) stream format and provides a 3 factor integrity +checking to maximize interoperability and optimize safety. Lzip can compress +about as fast as gzip @w{(lzip -0)} or compress most files more than bzip2 +@w{(lzip -9)}. Decompression speed is intermediate between gzip and bzip2. +Lzip is better than gzip and bzip2 from a data recovery perspective. Lzip +has been designed, written, and tested with great care to replace gzip and +bzip2 as the standard general-purpose compressed format for unix-like +systems. + +For compressing/decompressing large files on multiprocessor machines +@uref{http://www.nongnu.org/lzip/manual/plzip_manual.html,,plzip} can be +much faster than lzip at the cost of a slightly reduced compression ratio. +@ifnothtml +@xref{Top,plzip manual,,plzip}. +@end ifnothtml + +For creation and manipulation of compressed tar archives +@uref{http://www.nongnu.org/lzip/manual/tarlz_manual.html,,tarlz} can be more +efficient than using tar and plzip because tarlz is able to keep the +alignment between tar members and lzip members. +@ifnothtml +@xref{Top,tarlz manual,,tarlz}. +@end ifnothtml + +The lzip file format is designed for data sharing and long-term archiving, +taking into account both data integrity and decoder availability: + +@itemize @bullet +@item +The lzip format provides very safe integrity checking and some data +recovery means. The program +@uref{http://www.nongnu.org/lzip/manual/lziprecover_manual.html#Data-safety,,lziprecover} +can repair bit flip errors (one of the most common forms of data corruption) +in lzip files, and provides data recovery capabilities, including +error-checked merging of damaged copies of a file. +@ifnothtml +@xref{Data safety,,,lziprecover}. +@end ifnothtml + +@item +The lzip format is as simple as possible (but not simpler). The lzip +manual provides the source code of a simple decompressor along with a +detailed explanation of how it works, so that with the only help of the +lzip manual it would be possible for a digital archaeologist to extract +the data from a lzip file long after quantum computers eventually +render LZMA obsolete. + +@item +Additionally the lzip reference implementation is copylefted, which +guarantees that it will remain free forever. +@end itemize + +A nice feature of the lzip format is that a corrupt byte is easier to repair +the nearer it is from the beginning of the file. Therefore, with the help of +lziprecover, losing an entire archive just because of a corrupt byte near +the beginning is a thing of the past. + +The member trailer stores the 32-bit CRC of the original data, the size +of the original data, and the size of the member. These values, together +with the "End Of Stream" marker, provide a 3 factor integrity checking +which guarantees that the decompressed version of the data is identical +to the original. This guards against corruption of the compressed data, +and against undetected bugs in lzip (hopefully very unlikely). The +chances of data corruption going undetected are microscopic. Be aware, +though, that the check occurs upon decompression, so it can only tell +you that something is wrong. It can't help you recover the original +uncompressed data. + +Lzip uses the same well-defined exit status values used by bzip2, which +makes it safer than compressors returning ambiguous warning values (like +gzip) when it is used as a back end for other programs like tar or zutils. + +Lzip will automatically use for each file the largest dictionary size that +does not exceed neither the file size nor the limit given. Keep in mind that +the decompression memory requirement is affected at compression time by the +choice of dictionary size limit. + +The amount of memory required for compression is about 1 or 2 times the +dictionary size limit (1 if input file size is less than dictionary size +limit, else 2) plus 9 times the dictionary size really used. The option +@samp{-0} is special and only requires about @w{1.5 MiB} at most. The +amount of memory required for decompression is about @w{46 kB} larger +than the dictionary size really used. + +When compressing, lzip replaces every file given in the command line +with a compressed version of itself, with the name "original_name.lz". +When decompressing, lzip attempts to guess the name for the decompressed +file from that of the compressed file as follows: + +@multitable {anyothername} {becomes} {anyothername.out} +@item filename.lz @tab becomes @tab filename +@item filename.tlz @tab becomes @tab filename.tar +@item anyothername @tab becomes @tab anyothername.out +@end multitable + +(De)compressing a file is much like copying or moving it. Therefore lzip +preserves the access and modification dates, permissions, and, when +possible, ownership of the file just as @w{@samp{cp -p}} does. (If the user ID or +the group ID can't be duplicated, the file permission bits S_ISUID and +S_ISGID are cleared). + +Lzip is able to read from some types of non-regular files if either the +option @samp{-c} or the option @samp{-o} is specified. + +Lzip will refuse to read compressed data from a terminal or write compressed +data to a terminal, as this would be entirely incomprehensible and might +leave the terminal in an abnormal state. + +Lzip will correctly decompress a file which is the concatenation of two or +more compressed files. The result is the concatenation of the corresponding +decompressed files. Integrity testing of concatenated compressed files is +also supported. + +Lzip can produce multimember files, and lziprecover can safely recover the +undamaged members in case of file damage. Lzip can also split the compressed +output in volumes of a given size, even when reading from standard input. +This allows the direct creation of multivolume compressed tar archives. + +Lzip is able to compress and decompress streams of unlimited size by +automatically creating multimember output. The members so created are large, +about @w{2 PiB} each. + + +@node Output +@chapter Meaning of lzip's output +@cindex output + +The output of lzip looks like this: + +@example +lzip -v foo + foo: 6.676:1, 14.98% ratio, 85.02% saved, 450560 in, 67493 out. + +lzip -tvvv foo.lz + foo.lz: 6.676:1, 14.98% ratio, 85.02% saved. 450560 out, 67493 in. ok +@end example + +The meaning of each field is as follows: + +@table @code +@item N:1 +The compression ratio @w{(uncompressed_size / compressed_size)}, shown as +@w{N to 1}. + +@item ratio +The inverse compression ratio @w{(compressed_size / uncompressed_size)}, +shown as a percentage. A decimal ratio is easily obtained by moving the +decimal point two places to the left; @w{14.98% = 0.1498}. + +@item saved +The space saved by compression @w{(1 - ratio)}, shown as a percentage. + +@item in +Size of the input data. This is the uncompressed size when compressing, or +the compressed size when decompressing or testing. Note that lzip always +prints the uncompressed size before the compressed size when compressing, +decompressing, testing, or listing. + +@item out +Size of the output data. This is the compressed size when compressing, or +the decompressed size when decompressing or testing. + +@end table + +When decompressing or testing at verbosity level 4 (-vvvv), the dictionary +size used to compress the file and the CRC32 of the uncompressed data are +also shown. + +LANGUAGE NOTE: Uncompressed = not compressed = plain data; it may never have +been compressed. Decompressed is used to refer to data which have undergone +the process of decompression. + + +@node Invoking lzip +@chapter Invoking lzip +@cindex invoking +@cindex options +@cindex usage +@cindex version + +The format for running lzip is: + +@example +lzip [@var{options}] [@var{files}] +@end example + +@noindent +If no file names are specified, lzip compresses (or decompresses) from +standard input to standard output. A hyphen @samp{-} used as a @var{file} +argument means standard input. It can be mixed with other @var{files} and is +read just once, the first time it appears in the command line. + +lzip supports the following +@uref{http://www.nongnu.org/arg-parser/manual/arg_parser_manual.html#Argument-syntax,,options}: +@ifnothtml +@xref{Argument syntax,,,arg_parser}. +@end ifnothtml + +@table @code +@item -h +@itemx --help +Print an informative help message describing the options and exit. + +@item -V +@itemx --version +Print the version number of lzip on the standard output and exit. +This version number should be included in all bug reports. + +@anchor{--trailing-error} +@item -a +@itemx --trailing-error +Exit with error status 2 if any remaining input is detected after +decompressing the last member. Such remaining input is usually trailing +garbage that can be safely ignored. @xref{concat-example}. + +@item -b @var{bytes} +@itemx --member-size=@var{bytes} +When compressing, set the member size limit to @var{bytes}. It is advisable +to keep members smaller than RAM size so that they can be repaired with +lziprecover in case of corruption. A small member size may degrade +compression ratio, so use it only when needed. Valid values range from +@w{100 kB} to @w{2 PiB}. Defaults to @w{2 PiB}. + +@item -c +@itemx --stdout +Compress or decompress to standard output; keep input files unchanged. If +compressing several files, each file is compressed independently. (The +output consists of a sequence of independently compressed members). This +option (or @samp{-o}) is needed when reading from a named pipe (fifo) or +from a device. Use it also to recover as much of the decompressed data as +possible when decompressing a corrupt file. @samp{-c} overrides @samp{-o} +and @samp{-S}. @samp{-c} has no effect when testing or listing. + +@item -d +@itemx --decompress +Decompress the files specified. If a file does not exist, can't be opened, +or the destination file already exists and @samp{--force} has not been +specified, lzip continues decompressing the rest of the files and exits with +error status 1. If a file fails to decompress, or is a terminal, lzip exits +immediately with error status 2 without decompressing the rest of the files. +A terminal is considered an uncompressed file, and therefore invalid. + +@item -f +@itemx --force +Force overwrite of output files. + +@item -F +@itemx --recompress +When compressing, force re-compression of files whose name already has +the @samp{.lz} or @samp{.tlz} suffix. + +@item -k +@itemx --keep +Keep (don't delete) input files during compression or decompression. + +@item -l +@itemx --list +Print the uncompressed size, compressed size, and percentage saved of the +files specified. Trailing data are ignored. The values produced are correct +even for multimember files. If more than one file is given, a final line +containing the cumulative sizes is printed. With @samp{-v}, the dictionary +size, the number of members in the file, and the amount of trailing data (if +any) are also printed. With @samp{-vv}, the positions and sizes of each +member in multimember files are also printed. + +If any file is damaged, does not exist, can't be opened, or is not regular, +the final exit status will be @w{> 0}. @samp{-lq} can be used to verify +quickly (without decompressing) the structural integrity of the files +specified. (Use @samp{--test} to verify the data integrity). @samp{-alq} +additionally verifies that none of the files specified contain trailing data. + +@item -m @var{bytes} +@itemx --match-length=@var{bytes} +When compressing, set the match length limit in bytes. After a match +this long is found, the search is finished. Valid values range from 5 to +273. Larger values usually give better compression ratios but longer +compression times. + +@item -o @var{file} +@itemx --output=@var{file} +If @samp{-c} has not been also specified, write the (de)compressed output to +@var{file}; keep input files unchanged. If compressing several files, each +file is compressed independently. (The output consists of a sequence of +independently compressed members). This option (or @samp{-c}) is needed when +reading from a named pipe (fifo) or from a device. @w{@samp{-o -}} is +equivalent to @samp{-c}. @samp{-o} has no effect when testing or listing. + +In order to keep backward compatibility with lzip versions prior to 1.22, +when compressing from standard input and no other file names are given, the +extension @samp{.lz} is appended to @var{file} unless it already ends in +@samp{.lz} or @samp{.tlz}. This feature will be removed in a future version +of lzip. Meanwhile, redirection may be used instead of @samp{-o} to write +the compressed output to a file without the extension @samp{.lz} in its +name: @w{@samp{lzip < file > foo}}. + +When compressing and splitting the output in volumes, @var{file} is used as +a prefix, and several files named @samp{@var{file}00001.lz}, +@samp{@var{file}00002.lz}, etc, are created. In this case, only one input +file is allowed. + +@item -q +@itemx --quiet +Quiet operation. Suppress all messages. + +@item -s @var{bytes} +@itemx --dictionary-size=@var{bytes} +When compressing, set the dictionary size limit in bytes. Lzip will use +for each file the largest dictionary size that does not exceed neither +the file size nor this limit. Valid values range from @w{4 KiB} to +@w{512 MiB}. Values 12 to 29 are interpreted as powers of two, meaning +2^12 to 2^29 bytes. Dictionary sizes are quantized so that they can be +coded in just one byte (@pxref{coded-dict-size}). If the size specified +does not match one of the valid sizes, it will be rounded upwards by +adding up to @w{(@var{bytes} / 8)} to it. + +For maximum compression you should use a dictionary size limit as large +as possible, but keep in mind that the decompression memory requirement +is affected at compression time by the choice of dictionary size limit. + +@item -S @var{bytes} +@itemx --volume-size=@var{bytes} +When compressing, and @samp{-c} has not been also specified, split the +compressed output into several volume files with names +@samp{original_name00001.lz}, @samp{original_name00002.lz}, etc, and set the +volume size limit to @var{bytes}. Input files are kept unchanged. Each +volume is a complete, maybe multimember, lzip file. A small volume size may +degrade compression ratio, so use it only when needed. Valid values range +from @w{100 kB} to @w{4 EiB}. + +@item -t +@itemx --test +Check integrity of the files specified, but don't decompress them. This +really performs a trial decompression and throws away the result. Use it +together with @samp{-v} to see information about the files. If a file +fails the test, does not exist, can't be opened, or is a terminal, lzip +continues checking the rest of the files. A final diagnostic is shown at +verbosity level 1 or higher if any file fails the test when testing +multiple files. + +@item -v +@itemx --verbose +Verbose mode.@* +When compressing, show the compression ratio and size for each file +processed.@* +When decompressing or testing, further -v's (up to 4) increase the +verbosity level, showing status, compression ratio, dictionary size, +trailer contents (CRC, data size, member size), and up to 6 bytes of +trailing data (if any) both in hexadecimal and as a string of printable +ASCII characters.@* +Two or more @samp{-v} options show the progress of (de)compression. + +@item -0 .. -9 +Compression level. Set the compression parameters (dictionary size and +match length limit) as shown in the table below. The default compression +level is @samp{-6}, equivalent to @w{@samp{-s8MiB -m36}}. Note that +@samp{-9} can be much slower than @samp{-0}. These options have no +effect when decompressing, testing, or listing. + +The bidimensional parameter space of LZMA can't be mapped to a linear +scale optimal for all files. If your files are large, very repetitive, +etc, you may need to use the options @samp{--dictionary-size} and +@samp{--match-length} directly to achieve optimal performance. + +If several compression levels or @samp{-s} or @samp{-m} options are +given, the last setting is used. For example @w{@samp{-9 -s64MiB}} is +equivalent to @w{@samp{-s64MiB -m273}} + +@multitable {Level} {Dictionary size (-s)} {Match length limit (-m)} +@item Level @tab Dictionary size (-s) @tab Match length limit (-m) +@item -0 @tab 64 KiB @tab 16 bytes +@item -1 @tab 1 MiB @tab 5 bytes +@item -2 @tab 1.5 MiB @tab 6 bytes +@item -3 @tab 2 MiB @tab 8 bytes +@item -4 @tab 3 MiB @tab 12 bytes +@item -5 @tab 4 MiB @tab 20 bytes +@item -6 @tab 8 MiB @tab 36 bytes +@item -7 @tab 16 MiB @tab 68 bytes +@item -8 @tab 24 MiB @tab 132 bytes +@item -9 @tab 32 MiB @tab 273 bytes +@end multitable + +@item --fast +@itemx --best +Aliases for GNU gzip compatibility. + +@item --loose-trailing +When decompressing, testing, or listing, allow trailing data whose first +bytes are so similar to the magic bytes of a lzip header that they can +be confused with a corrupt header. Use this option if a file triggers a +"corrupt header" error and the cause is not indeed a corrupt header. + +@end table + +Numbers given as arguments to options may be followed by a multiplier +and an optional @samp{B} for "byte". + +Table of SI and binary prefixes (unit multipliers): + +@multitable {Prefix} {kilobyte (10^3 = 1000)} {|} {Prefix} {kibibyte (2^10 = 1024)} +@item Prefix @tab Value @tab | @tab Prefix @tab Value +@item k @tab kilobyte (10^3 = 1000) @tab | @tab Ki @tab kibibyte (2^10 = 1024) +@item M @tab megabyte (10^6) @tab | @tab Mi @tab mebibyte (2^20) +@item G @tab gigabyte (10^9) @tab | @tab Gi @tab gibibyte (2^30) +@item T @tab terabyte (10^12) @tab | @tab Ti @tab tebibyte (2^40) +@item P @tab petabyte (10^15) @tab | @tab Pi @tab pebibyte (2^50) +@item E @tab exabyte (10^18) @tab | @tab Ei @tab exbibyte (2^60) +@item Z @tab zettabyte (10^21) @tab | @tab Zi @tab zebibyte (2^70) +@item Y @tab yottabyte (10^24) @tab | @tab Yi @tab yobibyte (2^80) +@end multitable + +@sp 1 +Exit status: 0 for a normal exit, 1 for environmental problems (file not +found, invalid flags, I/O errors, etc), 2 to indicate a corrupt or invalid +input file, 3 for an internal consistency error (e.g., bug) which caused +lzip to panic. + + +@node Quality assurance +@chapter Design, development, and testing of lzip +@cindex quality assurance + +There are two ways of constructing a software design: One way is to make it +so simple that there are obviously no deficiencies and the other way is to +make it so complicated that there are no obvious deficiencies. The first +method is far more difficult.@* +--- C.A.R. Hoare + +Lzip is developed by volunteers who lack the resources required for +extensive testing in all circumstances. It is up to you to test lzip before +using it in mission-critical applications. However, a compressor like lzip +is not a toy, and maintaining it is not a hobby. Many people's data depend +on it. Therefore the lzip file format has been reviewed carefully and is +believed to be free from negligent design errors. + +Lzip has been designed, written, and tested with great care to replace gzip +and bzip2 as the standard general-purpose compressed format for unix-like +systems. This chapter describes the lessons learned from these previous +formats, and their application to the design of lzip. + +@sp 1 +@section Format design + +When gzip was designed in 1992, computers and operating systems were much +less capable than they are today. The designers of gzip tried to work around +some of those limitations, like 8.3 file names, with additional fields in +the file format. + +Today those limitations have mostly disappeared, and the format of gzip has +proved to be unnecessarily complicated. It includes fields that were never +used, others that have lost their usefulness, and finally others that have +become too limited. + +Bzip2 was designed 5 years later, and its format is simpler than the one of +gzip. + +Probably the worst defect of the gzip format from the point of view of data +safety is the variable size of its header. If the byte at offset 3 (flags) +of a gzip member gets corrupted, it may become difficult to recover the +data, even if the compressed blocks are intact, because it can't be known +with certainty where the compressed blocks begin. + +By contrast, the header of a lzip member has a fixed length of 6. The LZMA +stream in a lzip member always starts at offset 6, making it trivial to +recover the data even if the whole header becomes corrupt. + +Bzip2 also provides a header of fixed length and marks the begin and end of +each compressed block with six magic bytes, making it possible to find the +compressed blocks even in case of file damage. But bzip2 does not store the +size of each compressed block, as lzip does. + +Lziprecover is able to provide unique data recovery capabilities because the +lzip format is extraordinarily safe. The simple and safe design of the file +format complements the embedded error detection provided by the LZMA data +stream. Any distance larger than the dictionary size acts as a forbidden +symbol, allowing the decompressor to detect the approximate position of +errors, and leaving very little work for the check sequence (CRC and data +sizes) in the detection of errors. Lzip is usually able to detect all +possible bit flips in the compressed data without resorting to the check +sequence. It would be difficult to write an automatic recovery tool like +lziprecover for the gzip format. And, as far as I know, it has never been +written. + +Lzip, like gzip and bzip2, uses a CRC32 to check the integrity of the +decompressed data because it provides optimal accuracy in the detection of +errors up to a compressed size of about @w{16 GiB}, a size larger than that +of most files. In the case of lzip, the additional detection capability of +the decompressor reduces the probability of undetected errors several +million times more, resulting in a combined integrity checking optimally +accurate for any member size produced by lzip. Preliminary results suggest +that the lzip format is safe enough to be used in critical safety avionics +systems. + +The lzip format is designed for long-term archiving. Therefore it excludes +any unneeded features that may interfere with the future extraction of the +decompressed data. + +@sp 1 +@subsection Gzip format (mis)features not present in lzip + +@table @samp +@item Multiple algorithms + +Gzip provides a CM (Compression Method) field that has never been used +because it is a bad idea to begin with. New compression methods may require +additional fields, making it impossible to implement new methods and, at the +same time, keep the same format. This field does not solve the problem of +format proliferation; it just makes the problem less obvious. + +@item Optional fields in header + +Unless special precautions are taken, optional fields are generally a bad +idea because they produce a header of variable size. The gzip header has 2 +fields that, in addition to being optional, are zero-terminated. This means +that if any byte inside the field gets zeroed, or if the terminating zero +gets altered, gzip won't be able to find neither the header CRC nor the +compressed blocks. + +@item Optional CRC for the header + +Using an optional CRC for the header is not only a bad idea, it is an error; +it circumvents the Hamming distance (HD) of the CRC and may prevent the +extraction of perfectly good data. For example, if the CRC is used and the +bit enabling it is reset by a bit flip, the header will appear to be intact +(in spite of being corrupt) while the compressed blocks will appear to be +totally unrecoverable (in spite of being intact). Very misleading indeed. + +@item Metadata + +The gzip format stores some metadata, like the modification time of the +original file or the operating system on which compression took place. This +complicates reproducible compression (obtaining identical compressed output +from identical input). + +@end table + +@subsection Lzip format improvements over gzip and bzip2 + +@table @samp +@item 64-bit size field + +Probably the most frequently reported shortcoming of the gzip format is that +it only stores the least significant 32 bits of the uncompressed size. The +size of any file larger than @w{4 GiB} gets truncated. + +Bzip2 does not store the uncompressed size of the file. + +The lzip format provides a 64-bit field for the uncompressed size. +Additionally, lzip produces multimember output automatically when the size +is too large for a single member, allowing for an unlimited uncompressed +size. + +@item Distributed index + +The lzip format provides a distributed index that, among other things, helps +plzip to decompress several times faster than pigz and helps lziprecover do +its job. Neither the gzip format nor the bzip2 format do provide an index. + +A distributed index is safer and more scalable than a monolithic index. The +monolithic index introduces a single point of failure in the compressed file +and may limit the number of members or the total uncompressed size. + +@end table + +@section Quality of implementation + +@table @samp +@item Accurate and robust error detection + +The lzip format provides 3 factor integrity checking, and the decompressors +report mismatches in each factor separately. This method detects most false +positives for corruption. If just one byte in one factor fails but the other +two factors match the data, it probably means that the data are intact and +the corruption just affects the mismatching factor (CRC, data size, or +member size) in the member trailer. + +@item Multiple implementations + +Just like the lzip format provides 3 factor protection against undetected +data corruption, the development methodology of the lzip family of +compressors provides 3 factor protection against undetected programming +errors. + +Three related but independent compressor implementations, lzip, clzip, and +minilzip/lzlib, are developed concurrently. Every stable release of any of +them is tested to verify that it produces identical output to the other two. +This guarantees that all three implement the same algorithm, and makes it +unlikely that any of them may contain serious undiscovered errors. In fact, +no errors have been discovered in lzip since 2009. + +Additionally, the three implementations have been extensively tested with +@uref{http://www.nongnu.org/lzip/manual/lziprecover_manual.html#Unzcrash,,unzcrash}, +valgrind, and @samp{american fuzzy lop} without finding a single +vulnerability or false negative. +@ifnothtml +@xref{Unzcrash,,,lziprecover}. +@end ifnothtml + +@item Dictionary size + +Lzip automatically adapts the dictionary size to the size of each file. +In addition to reducing the amount of memory required for decompression, +this feature also minimizes the probability of being affected by RAM errors +during compression. @c key4_mask + +@item Exit status + +Returning a warning status of 2 is a design flaw of compress that leaked +into the design of gzip. Both bzip2 and lzip are free from this flaw. + +@end table + + +@node Algorithm +@chapter Algorithm +@cindex algorithm + +In spite of its name (Lempel-Ziv-Markov chain-Algorithm), LZMA is not a +concrete algorithm; it is more like "any algorithm using the LZMA coding +scheme". LZMA compression consists in describing the uncompressed data as a +succession of coding sequences from the set shown in Section @samp{What is +coded} (@pxref{what-is-coded}), and then encoding them using a range +encoder. For example, the option @samp{-0} of lzip uses the scheme in almost +the simplest way possible; issuing the longest match it can find, or a +literal byte if it can't find a match. Inversely, a much more elaborated way +of finding coding sequences of minimum size than the one currently used by +lzip could be developed, and the resulting sequence could also be coded +using the LZMA coding scheme. + +Lzip currently implements two variants of the LZMA algorithm: fast +(used by option @samp{-0}) and normal (used by all other compression levels). + +The high compression of LZMA comes from combining two basic, well-proven +compression ideas: sliding dictionaries (LZ77/78) and markov models (the +thing used by every compression algorithm that uses a range encoder or +similar order-0 entropy coder as its last stage) with segregation of +contexts according to what the bits are used for. + +Lzip is a two stage compressor. The first stage is a Lempel-Ziv coder, +which reduces redundancy by translating chunks of data to their +corresponding distance-length pairs. The second stage is a range encoder +that uses a different probability model for each type of data: +distances, lengths, literal bytes, etc. + +Here is how it works, step by step: + +1) The member header is written to the output stream. + +2) The first byte is coded literally, because there are no previous +bytes to which the match finder can refer to. + +3) The main encoder advances to the next byte in the input data and +calls the match finder. + +4) The match finder fills an array with the minimum distances before the +current byte where a match of a given length can be found. + +5) Go back to step 3 until a sequence (formed of pairs, repeated +distances, and literal bytes) of minimum price has been formed. Where the +price represents the number of output bits produced. + +6) The range encoder encodes the sequence produced by the main encoder +and sends the bytes produced to the output stream. + +7) Go back to step 3 until the input data are finished or until the +member or volume size limits are reached. + +8) The range encoder is flushed. + +9) The member trailer is written to the output stream. + +10) If there are more data to compress, go back to step 1. + +@sp 1 +During compression, lzip reads data in large blocks (one dictionary size at +a time). Therefore it may block for up to tens of seconds any process +feeding data to it through a pipe. This is normal. The blocking intervals +get longer with higher compression levels because dictionary size increases +(and compression speed decreases) with compression level. + +@noindent +The ideas embodied in lzip are due to (at least) the following people: +Abraham Lempel and Jacob Ziv (for the LZ algorithm), Andrey Markov (for the +definition of Markov chains), G.N.N. Martin (for the definition of range +encoding), Igor Pavlov (for putting all the above together in LZMA), and +Julian Seward (for bzip2's CLI). + + +@node File format +@chapter File format +@cindex file format + +Perfection is reached, not when there is no longer anything to add, but +when there is no longer anything to take away.@* +--- Antoine de Saint-Exupery + +@sp 1 +In the diagram below, a box like this: + +@verbatim ++---+ +| | <-- the vertical bars might be missing ++---+ +@end verbatim + +represents one byte; a box like this: + +@verbatim ++==============+ +| | ++==============+ +@end verbatim + +represents a variable number of bytes. + +@sp 1 +A lzip file consists of a series of independent "members" (compressed data +sets). The members simply appear one after another in the file, with no +additional information before, between, or after them. Each member can +encode in compressed form up to @w{16 EiB - 1 byte} of uncompressed data. +The size of a multimember file is unlimited. + +Each member has the following structure: + +@verbatim ++--+--+--+--+----+----+=============+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ +| ID string | VN | DS | LZMA stream | CRC32 | Data size | Member size | ++--+--+--+--+----+----+=============+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ +@end verbatim + +All multibyte values are stored in little endian order. + +@table @samp +@item ID string (the "magic" bytes) +A four byte string, identifying the lzip format, with the value "LZIP" +(0x4C, 0x5A, 0x49, 0x50). + +@item VN (version number, 1 byte) +Just in case something needs to be modified in the future. 1 for now. + +@anchor{coded-dict-size} +@item DS (coded dictionary size, 1 byte) +The dictionary size is calculated by taking a power of 2 (the base size) +and subtracting from it a fraction between 0/16 and 7/16 of the base size.@* +Bits 4-0 contain the base 2 logarithm of the base size (12 to 29).@* +Bits 7-5 contain the numerator of the fraction (0 to 7) to subtract +from the base size to obtain the dictionary size.@* +Example: 0xD3 = 2^19 - 6 * 2^15 = 512 KiB - 6 * 32 KiB = 320 KiB@* +Valid values for dictionary size range from 4 KiB to 512 MiB. + +@item LZMA stream +The LZMA stream, finished by an "End Of Stream" marker. Uses default values +for encoder properties. @xref{Stream format}, for a complete description. + +@item CRC32 (4 bytes) +Cyclic Redundancy Check (CRC) of the original uncompressed data. + +@item Data size (8 bytes) +Size of the original uncompressed data. + +@item Member size (8 bytes) +Total size of the member, including header and trailer. This field acts +as a distributed index, allows the verification of stream integrity, and +facilitates the safe recovery of undamaged members from multimember files. +Member size should be limited to @w{2 PiB} to prevent the data size field +from overflowing. + +@end table + + +@node Stream format +@chapter Format of the LZMA stream in lzip files +@cindex format of the LZMA stream + +The LZMA algorithm has three parameters, called "special LZMA +properties", to adjust it for some kinds of binary data. These +parameters are: @samp{literal_context_bits} (with a default value of 3), +@samp{literal_pos_state_bits} (with a default value of 0), and +@samp{pos_state_bits} (with a default value of 2). As a general purpose +compressor, lzip only uses the default values for these parameters. In +particular @samp{literal_pos_state_bits} has been optimized away and +does not even appear in the code. + +Lzip finishes the LZMA stream with an "End Of Stream" (EOS) marker (the +distance-length pair @w{0xFFFFFFFFU, 2}), which in conjunction with the +@samp{member size} field in the member trailer allows the verification of +stream integrity. The EOS marker is the only marker allowed in lzip files. +The LZMA stream in lzip files always has these two features (default +properties and EOS marker) and is referred to in this document as +LZMA-302eos. This simplified form of the LZMA stream format has been chosen +to maximize interoperability and safety. + +The second stage of LZMA is a range encoder that uses a different +probability model for each type of symbol: distances, lengths, literal +bytes, etc. Range encoding conceptually encodes all the symbols of the +message into one number. Unlike Huffman coding, which assigns to each +symbol a bit-pattern and concatenates all the bit-patterns together, +range encoding can compress one symbol to less than one bit. Therefore +the compressed data produced by a range encoder can't be split in pieces +that could be described individually. + +It seems that the only way of describing the LZMA-302eos stream is to +describe the algorithm that decodes it. And given the many details +about the range decoder that need to be described accurately, the source +code of a real decompressor seems the only appropriate reference to use. + +What follows is a description of the decoding algorithm for LZMA-302eos +streams using as reference the source code of "lzd", an educational +decompressor for lzip files which can be downloaded from the lzip download +directory. Lzd is written in C++11 and its source code is included in +appendix A. @xref{Reference source code}. + +@sp 1 +@section What is coded + +@anchor{what-is-coded} +The LZMA stream includes literals, matches, and repeated matches (matches +reusing a recently used distance). There are 7 different coding sequences: + +@multitable @columnfractions .35 .14 .51 +@headitem Bit sequence @tab Name @tab Description +@item 0 + byte @tab literal @tab literal byte +@item 1 + 0 + len + dis @tab match @tab distance-length pair +@item 1 + 1 + 0 + 0 @tab shortrep @tab 1 byte match at latest used distance +@item 1 + 1 + 0 + 1 + len @tab rep0 @tab len bytes match at latest used distance +@item 1 + 1 + 1 + 0 + len @tab rep1 @tab len bytes match at second +latest used distance +@item 1 + 1 + 1 + 1 + 0 + len @tab rep2 @tab len bytes match at third +latest used distance +@item 1 + 1 + 1 + 1 + 1 + len @tab rep3 @tab len bytes match at fourth +latest used distance +@end multitable + +@sp 1 +In the following tables, multibit sequences are coded in normal order, +from most significant bit (MSB) to least significant bit (LSB), except +where noted otherwise. + +Lengths (the @samp{len} in the table above) are coded as follows: + +@multitable @columnfractions .5 .5 +@headitem Bit sequence @tab Description +@item 0 + 3 bits @tab lengths from 2 to 9 +@item 1 + 0 + 3 bits @tab lengths from 10 to 17 +@item 1 + 1 + 8 bits @tab lengths from 18 to 273 +@end multitable + +@sp 1 +The coding of distances is a little more complicated, so I'll begin by +explaining a simpler version of the encoding. + +Imagine you need to encode a number from 0 to @w{2^32 - 1}, and you want to +do it in a way that produces shorter codes for the smaller numbers. You may +first encode the position of the most significant bit that is set to 1, +which you may find by making a bit scan from the left (from the MSB). A +position of 0 means that the number is 0 (no bit is set), 1 means the LSB is +the first bit set (the number is 1), and 32 means the MSB is set (i.e., the +number is @w{>= 0x80000000}). Then, if the position is @w{>= 2}, you encode +the remaining @w{position - 1} bits. Let's call these bits "direct bits" +because they are coded directly by value instead of indirectly by position. + +The inconvenient of this simple method is that it needs 6 bits to encode the +position, but it just uses 33 of the 64 possible values, wasting almost half +of the codes. + +The intelligent trick of LZMA is that it encodes in what it calls a "slot" +the position of the most significant bit set, along with the value of the +next bit, using the same 6 bits that would take to encode the position +alone. This seems to need 66 slots (twice the number of positions), but for +positions 0 and 1 there is no next bit, so the number of slots needed is 64 +(0 to 63). + +The 6 bits representing this "slot number" are then context-coded. If +the distance is @w{>= 4}, the remaining bits are encoded as follows. +@samp{direct_bits} is the amount of remaining bits (from 1 to 30) needed +to form a complete distance, and is calculated as @w{(slot >> 1) - 1}. +If a distance needs 6 or more direct_bits, the last 4 bits are encoded +separately. The last piece (all the direct_bits for distances 4 to 127, +or the last 4 bits for distances @w{>= 128}) is context-coded in reverse +order (from LSB to MSB). For distances @w{>= 128}, the +@w{@samp{direct_bits - 4}} part is encoded with fixed 0.5 probability. + +@multitable @columnfractions .5 .5 +@headitem Bit sequence @tab Description +@item slot @tab distances from 0 to 3 +@item slot + direct_bits @tab distances from 4 to 127 +@item slot + (direct_bits - 4) + 4 bits @tab distances from 128 to +2^32 - 1 +@end multitable + +@sp 1 +@section The coding contexts + +These contexts (@samp{Bit_model} in the source), are integers or arrays +of integers representing the probability of the corresponding bit being 0. + +The indices used in these arrays are: + +@table @samp +@item state +A state machine (@samp{State} in the source) with 12 states (0 to 11), +coding the latest 2 to 4 types of sequences processed. The initial state +is 0. + +@item pos_state +Value of the 2 least significant bits of the current position in the +decoded data. + +@item literal_state +Value of the 3 most significant bits of the latest byte decoded. + +@item len_state +Coded value of the current match length @w{(length - 2)}, with a maximum +of 3. The resulting value is in the range 0 to 3. + +@end table + + +The types of previous sequences corresponding to each state are shown in the +following table. @samp{!literal} is any sequence except a literal byte. +@samp{rep} is any one of @samp{rep0}, @samp{rep1}, @samp{rep2}, or +@samp{rep3}. The last type in each line is the most recent. + +@multitable {State} {rep or (!literal, shortrep), literal, literal} +@headitem State @tab Types of previous sequences +@item 0 @tab literal, literal, literal +@item 1 @tab match, literal, literal +@item 2 @tab rep or (!literal, shortrep), literal, literal +@item 3 @tab literal, shortrep, literal, literal +@item 4 @tab match, literal +@item 5 @tab rep or (!literal, shortrep), literal +@item 6 @tab literal, shortrep, literal +@item 7 @tab literal, match +@item 8 @tab literal, rep +@item 9 @tab literal, shortrep +@item 10 @tab !literal, match +@item 11 @tab !literal, (rep or shortrep) +@end multitable + +@sp 1 +The contexts for decoding the type of coding sequence are: + +@multitable @columnfractions .2 .35 .45 +@headitem Name @tab Indices @tab Used when +@item bm_match @tab state, pos_state @tab sequence start +@item bm_rep @tab state @tab after sequence 1 +@item bm_rep0 @tab state @tab after sequence 11 +@item bm_rep1 @tab state @tab after sequence 111 +@item bm_rep2 @tab state @tab after sequence 1111 +@item bm_len @tab state, pos_state @tab after sequence 110 +@end multitable + +@sp 1 +The contexts for decoding distances are: + +@multitable @columnfractions .2 .3 .5 +@headitem Name @tab Indices @tab Used when +@item bm_dis_slot @tab len_state, bit tree @tab distance start +@item bm_dis @tab reverse bit tree @tab after slots 4 to 13 +@item bm_align @tab reverse bit tree @tab for distances >= 128, after +fixed probability bits +@end multitable + +@sp 1 +There are two separate sets of contexts for lengths (@samp{Len_model} in +the source). One for normal matches, the other for repeated matches. The +contexts in each Len_model are (see @samp{decode_len} in the source): + +@multitable @columnfractions .2 .4 .4 +@headitem Name @tab Indices @tab Used when +@item choice1 @tab none @tab length start +@item choice2 @tab none @tab after sequence 1 +@item bm_low @tab pos_state, bit tree @tab after sequence 0 +@item bm_mid @tab pos_state, bit tree @tab after sequence 10 +@item bm_high @tab bit tree @tab after sequence 11 +@end multitable + +@sp 1 +The context array @samp{bm_literal} is special. In principle it acts as +a normal bit tree context, the one selected by @samp{literal_state}. But +if the previous decoded byte was not a literal, two other bit tree +contexts are used depending on the value of each bit in +@samp{match_byte} (the byte at the latest used distance), until a bit is +decoded that is different from its corresponding bit in +@samp{match_byte}. After the first difference is found, the rest of the +byte is decoded using the normal bit tree context. (See +@samp{decode_matched} in the source). + +@sp 1 +@section The range decoder + +The LZMA stream is consumed one byte at a time by the range decoder. +(See @samp{normalize} in the source). Every byte consumed produces a +variable number of decoded bits, depending on how well these bits agree +with their context. (See @samp{decode_bit} in the source). + +The range decoder state consists of two unsigned 32-bit variables: +@samp{range} (representing the most significant part of the range size +not yet decoded) and @samp{code} (representing the current point within +@samp{range}). @samp{range} is initialized to @w{2^32 - 1}, and +@samp{code} is initialized to 0. + +The range encoder produces a first 0 byte that must be ignored by the +range decoder. This is done by shifting 5 bytes in the initialization of +@samp{code} instead of 4. (See the @samp{Range_decoder} constructor in +the source). + +@sp 1 +@section Decoding and verifying the LZMA stream + +After decoding the member header and obtaining the dictionary size, the +range decoder is initialized and then the LZMA decoder enters a loop +(see @samp{decode_member} in the source) where it invokes the range +decoder with the appropriate contexts to decode the different coding +sequences (matches, repeated matches, and literal bytes), until the "End +Of Stream" marker is decoded. + +Once the "End Of Stream" marker has been decoded, the decompressor reads and +decodes the member trailer, and verifies that the three integrity factors +stored there (CRC, data size, and member size) match those computed from the +data. + + +@node Trailing data +@chapter Extra data appended to the file +@cindex trailing data + +Sometimes extra data are found appended to a lzip file after the last +member. Such trailing data may be: + +@itemize @bullet +@item +Padding added to make the file size a multiple of some block size, for +example when writing to a tape. It is safe to append any amount of +padding zero bytes to a lzip file. + +@item +Useful data added by the user; a cryptographically secure hash, a +description of file contents, etc. It is safe to append any amount of +text to a lzip file as long as none of the first four bytes of the text +match the corresponding byte in the string "LZIP", and the text does not +contain any zero bytes (null characters). Nonzero bytes and zero bytes +can't be safely mixed in trailing data. + +@item +Garbage added by some not totally successful copy operation. + +@item +Malicious data added to the file in order to make its total size and +hash value (for a chosen hash) coincide with those of another file. + +@item +In rare cases, trailing data could be the corrupt header of another +member. In multimember or concatenated files the probability of +corruption happening in the magic bytes is 5 times smaller than the +probability of getting a false positive caused by the corruption of the +integrity information itself. Therefore it can be considered to be below +the noise level. Additionally, the test used by lzip to discriminate +trailing data from a corrupt header has a Hamming distance (HD) of 3, +and the 3 bit flips must happen in different magic bytes for the test to +fail. In any case, the option @samp{--trailing-error} guarantees that +any corrupt header will be detected. +@end itemize + +Trailing data are in no way part of the lzip file format, but tools +reading lzip files are expected to behave as correctly and usefully as +possible in the presence of trailing data. + +Trailing data can be safely ignored in most cases. In some cases, like +that of user-added data, they are expected to be ignored. In those cases +where a file containing trailing data must be rejected, the option +@samp{--trailing-error} can be used. @xref{--trailing-error}. + + +@node Examples +@chapter A small tutorial with examples +@cindex examples + +WARNING! Even if lzip is bug-free, other causes may result in a corrupt +compressed file (bugs in the system libraries, memory errors, etc). +Therefore, if the data you are going to compress are important, give the +option @samp{--keep} to lzip and don't remove the original file until you +verify the compressed file with a command like +@w{@samp{lzip -cd file.lz | cmp file -}}. Most RAM errors happening during +compression can only be detected by comparing the compressed file with the +original because the corruption happens before lzip compresses the RAM +contents, resulting in a valid compressed file containing wrong data. + +@sp 1 +@noindent +Example 1: Extract all the files from archive @samp{foo.tar.lz}. + +@example + tar -xf foo.tar.lz +or + lzip -cd foo.tar.lz | tar -xf - +@end example + +@sp 1 +@noindent +Example 2: Replace a regular file with its compressed version @samp{file.lz} +and show the compression ratio. + +@example +lzip -v file +@end example + +@sp 1 +@noindent +Example 3: Like example 2 but the created @samp{file.lz} is multimember with +a member size of @w{1 MiB}. The compression ratio is not shown. + +@example +lzip -b 1MiB file +@end example + +@sp 1 +@noindent +Example 4: Restore a regular file from its compressed version +@samp{file.lz}. If the operation is successful, @samp{file.lz} is removed. + +@example +lzip -d file.lz +@end example + +@sp 1 +@noindent +Example 5: Verify the integrity of the compressed file @samp{file.lz} and +show status. + +@example +lzip -tv file.lz +@end example + +@sp 1 +@anchor{concat-example} +@noindent +Example 6: The right way of concatenating the decompressed output of two or +more compressed files. @xref{Trailing data}. + +@example +Don't do this + cat file1.lz file2.lz file3.lz | lzip -d - +Do this instead + lzip -cd file1.lz file2.lz file3.lz +@end example + +@sp 1 +@noindent +Example 7: Decompress @samp{file.lz} partially until @w{10 KiB} of +decompressed data are produced. + +@example +lzip -cd file.lz | dd bs=1024 count=10 +@end example + +@sp 1 +@noindent +Example 8: Decompress @samp{file.lz} partially from decompressed byte at +offset 10000 to decompressed byte at offset 14999 (5000 bytes are produced). + +@example +lzip -cd file.lz | dd bs=1000 skip=10 count=5 +@end example + +@sp 1 +@noindent +Example 9: Compress a whole device in /dev/sdc and send the output to +@samp{file.lz}. + +@example + lzip -c /dev/sdc > file.lz +or + lzip /dev/sdc -o file.lz +@end example + +@sp 1 +@noindent +Example 10: Create a multivolume compressed tar archive with a volume size +of @w{1440 KiB}. + +@example +tar -c some_directory | lzip -S 1440KiB -o volume_name - +@end example + +@sp 1 +@noindent +Example 11: Extract a multivolume compressed tar archive. + +@example +lzip -cd volume_name*.lz | tar -xf - +@end example + +@sp 1 +@noindent +Example 12: Create a multivolume compressed backup of a large database file +with a volume size of @w{650 MB}, where each volume is a multimember file +with a member size of @w{32 MiB}. + +@example +lzip -b 32MiB -S 650MB big_db +@end example + + +@node Problems +@chapter Reporting bugs +@cindex bugs +@cindex getting help + +There are probably bugs in lzip. There are certainly errors and +omissions in this manual. If you report them, they will get fixed. If +you don't, no one will ever know about them and they will remain unfixed +for all eternity, if not longer. + +If you find a bug in lzip, please send electronic mail to +@email{lzip-bug@@nongnu.org}. Include the version number, which you can +find by running @w{@samp{lzip --version}}. + + +@node Reference source code +@appendix Reference source code +@cindex reference source code + +@verbatim +/* Lzd - Educational decompressor for the lzip format + Copyright (C) 2013-2022 Antonio Diaz Diaz. + + This program is free software. Redistribution and use in source and + binary forms, with or without modification, are permitted provided + that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright + notice, this list of conditions, and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions, and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +*/ +/* + Exit status: 0 for a normal exit, 1 for environmental problems + (file not found, invalid flags, I/O errors, etc), 2 to indicate a + corrupt or invalid input file. +*/ + +#include <algorithm> +#include <cerrno> +#include <cstdio> +#include <cstdlib> +#include <cstring> +#include <stdint.h> +#include <unistd.h> +#if defined __MSVCRT__ || defined __OS2__ || defined __DJGPP__ +#include <fcntl.h> +#include <io.h> +#endif + + +class State + { + int st; + +public: + enum { states = 12 }; + State() : st( 0 ) {} + int operator()() const { return st; } + bool is_char() const { return st < 7; } + + void set_char() + { + const int next[states] = { 0, 0, 0, 0, 1, 2, 3, 4, 5, 6, 4, 5 }; + st = next[st]; + } + void set_match() { st = ( st < 7 ) ? 7 : 10; } + void set_rep() { st = ( st < 7 ) ? 8 : 11; } + void set_short_rep() { st = ( st < 7 ) ? 9 : 11; } + }; + + +enum { + min_dictionary_size = 1 << 12, + max_dictionary_size = 1 << 29, + literal_context_bits = 3, + literal_pos_state_bits = 0, // not used + pos_state_bits = 2, + pos_states = 1 << pos_state_bits, + pos_state_mask = pos_states - 1, + + len_states = 4, + dis_slot_bits = 6, + start_dis_model = 4, + end_dis_model = 14, + modeled_distances = 1 << ( end_dis_model / 2 ), // 128 + dis_align_bits = 4, + dis_align_size = 1 << dis_align_bits, + + len_low_bits = 3, + len_mid_bits = 3, + len_high_bits = 8, + len_low_symbols = 1 << len_low_bits, + len_mid_symbols = 1 << len_mid_bits, + len_high_symbols = 1 << len_high_bits, + max_len_symbols = len_low_symbols + len_mid_symbols + len_high_symbols, + + min_match_len = 2, // must be 2 + + bit_model_move_bits = 5, + bit_model_total_bits = 11, + bit_model_total = 1 << bit_model_total_bits }; + +struct Bit_model + { + int probability; + Bit_model() : probability( bit_model_total / 2 ) {} + }; + +struct Len_model + { + Bit_model choice1; + Bit_model choice2; + Bit_model bm_low[pos_states][len_low_symbols]; + Bit_model bm_mid[pos_states][len_mid_symbols]; + Bit_model bm_high[len_high_symbols]; + }; + + +class CRC32 + { + uint32_t data[256]; // Table of CRCs of all 8-bit messages. + +public: + CRC32() + { + for( unsigned n = 0; n < 256; ++n ) + { + unsigned c = n; + for( int k = 0; k < 8; ++k ) + { if( c & 1 ) c = 0xEDB88320U ^ ( c >> 1 ); else c >>= 1; } + data[n] = c; + } + } + + void update_buf( uint32_t & crc, const uint8_t * const buffer, + const int size ) const + { + for( int i = 0; i < size; ++i ) + crc = data[(crc^buffer[i])&0xFF] ^ ( crc >> 8 ); + } + }; + +const CRC32 crc32; + + +typedef uint8_t Lzip_header[6]; // 0-3 magic bytes + // 4 version + // 5 coded dictionary size +typedef uint8_t Lzip_trailer[20]; + // 0-3 CRC32 of the uncompressed data + // 4-11 size of the uncompressed data + // 12-19 member size including header and trailer + +class Range_decoder + { + unsigned long long member_pos; + uint32_t code; + uint32_t range; + +public: + Range_decoder() : member_pos( 6 ), code( 0 ), range( 0xFFFFFFFFU ) + { + for( int i = 0; i < 5; ++i ) code = ( code << 8 ) | get_byte(); + } + + uint8_t get_byte() { ++member_pos; return std::getc( stdin ); } + unsigned long long member_position() const { return member_pos; } + + unsigned decode( const int num_bits ) + { + unsigned symbol = 0; + for( int i = num_bits; i > 0; --i ) + { + range >>= 1; + symbol <<= 1; + if( code >= range ) { code -= range; symbol |= 1; } + if( range <= 0x00FFFFFFU ) // normalize + { range <<= 8; code = ( code << 8 ) | get_byte(); } + } + return symbol; + } + + unsigned decode_bit( Bit_model & bm ) + { + unsigned symbol; + const uint32_t bound = ( range >> bit_model_total_bits ) * bm.probability; + if( code < bound ) + { + range = bound; + bm.probability += + ( bit_model_total - bm.probability ) >> bit_model_move_bits; + symbol = 0; + } + else + { + range -= bound; + code -= bound; + bm.probability -= bm.probability >> bit_model_move_bits; + symbol = 1; + } + if( range <= 0x00FFFFFFU ) // normalize + { range <<= 8; code = ( code << 8 ) | get_byte(); } + return symbol; + } + + unsigned decode_tree( Bit_model bm[], const int num_bits ) + { + unsigned symbol = 1; + for( int i = 0; i < num_bits; ++i ) + symbol = ( symbol << 1 ) | decode_bit( bm[symbol] ); + return symbol - ( 1 << num_bits ); + } + + unsigned decode_tree_reversed( Bit_model bm[], const int num_bits ) + { + unsigned symbol = decode_tree( bm, num_bits ); + unsigned reversed_symbol = 0; + for( int i = 0; i < num_bits; ++i ) + { + reversed_symbol = ( reversed_symbol << 1 ) | ( symbol & 1 ); + symbol >>= 1; + } + return reversed_symbol; + } + + unsigned decode_matched( Bit_model bm[], const unsigned match_byte ) + { + unsigned symbol = 1; + for( int i = 7; i >= 0; --i ) + { + const unsigned match_bit = ( match_byte >> i ) & 1; + const unsigned bit = decode_bit( bm[symbol+(match_bit<<8)+0x100] ); + symbol = ( symbol << 1 ) | bit; + if( match_bit != bit ) + { + while( symbol < 0x100 ) + symbol = ( symbol << 1 ) | decode_bit( bm[symbol] ); + break; + } + } + return symbol & 0xFF; + } + + unsigned decode_len( Len_model & lm, const int pos_state ) + { + if( decode_bit( lm.choice1 ) == 0 ) + return decode_tree( lm.bm_low[pos_state], len_low_bits ); + if( decode_bit( lm.choice2 ) == 0 ) + return len_low_symbols + + decode_tree( lm.bm_mid[pos_state], len_mid_bits ); + return len_low_symbols + len_mid_symbols + + decode_tree( lm.bm_high, len_high_bits ); + } + }; + + +class LZ_decoder + { + unsigned long long partial_data_pos; + Range_decoder rdec; + const unsigned dictionary_size; + uint8_t * const buffer; // output buffer + unsigned pos; // current pos in buffer + unsigned stream_pos; // first byte not yet written to stdout + uint32_t crc_; + bool pos_wrapped; + + void flush_data(); + + uint8_t peek( const unsigned distance ) const + { + if( pos > distance ) return buffer[pos - distance - 1]; + if( pos_wrapped ) return buffer[dictionary_size + pos - distance - 1]; + return 0; // prev_byte of first byte + } + + void put_byte( const uint8_t b ) + { + buffer[pos] = b; + if( ++pos >= dictionary_size ) flush_data(); + } + +public: + explicit LZ_decoder( const unsigned dict_size ) + : + partial_data_pos( 0 ), + dictionary_size( dict_size ), + buffer( new uint8_t[dictionary_size] ), + pos( 0 ), + stream_pos( 0 ), + crc_( 0xFFFFFFFFU ), + pos_wrapped( false ) + {} + + ~LZ_decoder() { delete[] buffer; } + + unsigned crc() const { return crc_ ^ 0xFFFFFFFFU; } + unsigned long long data_position() const + { return partial_data_pos + pos; } + uint8_t get_byte() { return rdec.get_byte(); } + unsigned long long member_position() const + { return rdec.member_position(); } + + bool decode_member(); + }; + + +void LZ_decoder::flush_data() + { + if( pos > stream_pos ) + { + const unsigned size = pos - stream_pos; + crc32.update_buf( crc_, buffer + stream_pos, size ); + if( std::fwrite( buffer + stream_pos, 1, size, stdout ) != size ) + { std::fprintf( stderr, "Write error: %s\n", std::strerror( errno ) ); + std::exit( 1 ); } + if( pos >= dictionary_size ) + { partial_data_pos += pos; pos = 0; pos_wrapped = true; } + stream_pos = pos; + } + } + + +bool LZ_decoder::decode_member() // Returns false if error + { + Bit_model bm_literal[1<<literal_context_bits][0x300]; + Bit_model bm_match[State::states][pos_states]; + Bit_model bm_rep[State::states]; + Bit_model bm_rep0[State::states]; + Bit_model bm_rep1[State::states]; + Bit_model bm_rep2[State::states]; + Bit_model bm_len[State::states][pos_states]; + Bit_model bm_dis_slot[len_states][1<<dis_slot_bits]; + Bit_model bm_dis[modeled_distances-end_dis_model+1]; + Bit_model bm_align[dis_align_size]; + Len_model match_len_model; + Len_model rep_len_model; + unsigned rep0 = 0; // rep[0-3] latest four distances + unsigned rep1 = 0; // used for efficient coding of + unsigned rep2 = 0; // repeated distances + unsigned rep3 = 0; + State state; + + while( !std::feof( stdin ) && !std::ferror( stdin ) ) + { + const int pos_state = data_position() & pos_state_mask; + if( rdec.decode_bit( bm_match[state()][pos_state] ) == 0 ) // 1st bit + { + // literal byte + const uint8_t prev_byte = peek( 0 ); + const int literal_state = prev_byte >> ( 8 - literal_context_bits ); + Bit_model * const bm = bm_literal[literal_state]; + if( state.is_char() ) + put_byte( rdec.decode_tree( bm, 8 ) ); + else + put_byte( rdec.decode_matched( bm, peek( rep0 ) ) ); + state.set_char(); + continue; + } + // match or repeated match + int len; + if( rdec.decode_bit( bm_rep[state()] ) != 0 ) // 2nd bit + { + if( rdec.decode_bit( bm_rep0[state()] ) == 0 ) // 3rd bit + { + if( rdec.decode_bit( bm_len[state()][pos_state] ) == 0 ) // 4th bit + { state.set_short_rep(); put_byte( peek( rep0 ) ); continue; } + } + else + { + unsigned distance; + if( rdec.decode_bit( bm_rep1[state()] ) == 0 ) // 4th bit + distance = rep1; + else + { + if( rdec.decode_bit( bm_rep2[state()] ) == 0 ) // 5th bit + distance = rep2; + else + { distance = rep3; rep3 = rep2; } + rep2 = rep1; + } + rep1 = rep0; + rep0 = distance; + } + state.set_rep(); + len = min_match_len + rdec.decode_len( rep_len_model, pos_state ); + } + else // match + { + rep3 = rep2; rep2 = rep1; rep1 = rep0; + len = min_match_len + rdec.decode_len( match_len_model, pos_state ); + const int len_state = std::min( len - min_match_len, len_states - 1 ); + rep0 = rdec.decode_tree( bm_dis_slot[len_state], dis_slot_bits ); + if( rep0 >= start_dis_model ) + { + const unsigned dis_slot = rep0; + const int direct_bits = ( dis_slot >> 1 ) - 1; + rep0 = ( 2 | ( dis_slot & 1 ) ) << direct_bits; + if( dis_slot < end_dis_model ) + rep0 += rdec.decode_tree_reversed( bm_dis + ( rep0 - dis_slot ), + direct_bits ); + else + { + rep0 += + rdec.decode( direct_bits - dis_align_bits ) << dis_align_bits; + rep0 += rdec.decode_tree_reversed( bm_align, dis_align_bits ); + if( rep0 == 0xFFFFFFFFU ) // marker found + { + flush_data(); + return ( len == min_match_len ); // End Of Stream marker + } + } + } + state.set_match(); + if( rep0 >= dictionary_size || ( rep0 >= pos && !pos_wrapped ) ) + { flush_data(); return false; } + } + for( int i = 0; i < len; ++i ) put_byte( peek( rep0 ) ); + } + flush_data(); + return false; + } + + +int main( const int argc, const char * const argv[] ) + { + if( argc > 2 || ( argc == 2 && std::strcmp( argv[1], "-d" ) != 0 ) ) + { + std::printf( + "Lzd %s - Educational decompressor for the lzip format.\n" + "Study the source to learn how a lzip decompressor works.\n" + "See the lzip manual for an explanation of the code.\n" + "\nUsage: %s [-d] < file.lz > file\n" + "Lzd decompresses from standard input to standard output.\n" + "\nCopyright (C) 2022 Antonio Diaz Diaz.\n" + "License 2-clause BSD.\n" + "This is free software: you are free to change and redistribute it.\n" + "There is NO WARRANTY, to the extent permitted by law.\n" + "Report bugs to lzip-bug@nongnu.org\n" + "Lzd home page: http://www.nongnu.org/lzip/lzd.html\n", + PROGVERSION, argv[0] ); + return 0; + } + +#if defined __MSVCRT__ || defined __OS2__ || defined __DJGPP__ + setmode( STDIN_FILENO, O_BINARY ); + setmode( STDOUT_FILENO, O_BINARY ); +#endif + + for( bool first_member = true; ; first_member = false ) + { + Lzip_header header; // verify header + for( int i = 0; i < 6; ++i ) header[i] = std::getc( stdin ); + if( std::feof( stdin ) || std::memcmp( header, "LZIP\x01", 5 ) != 0 ) + { + if( first_member ) + { std::fputs( "Bad magic number (file not in lzip format).\n", + stderr ); return 2; } + break; // ignore trailing data + } + unsigned dict_size = 1 << ( header[5] & 0x1F ); + dict_size -= ( dict_size / 16 ) * ( ( header[5] >> 5 ) & 7 ); + if( dict_size < min_dictionary_size || dict_size > max_dictionary_size ) + { std::fputs( "Invalid dictionary size in member header.\n", stderr ); + return 2; } + + LZ_decoder decoder( dict_size ); // decode LZMA stream + if( !decoder.decode_member() ) + { std::fputs( "Data error\n", stderr ); return 2; } + + Lzip_trailer trailer; // verify trailer + for( int i = 0; i < 20; ++i ) trailer[i] = decoder.get_byte(); + int retval = 0; + unsigned crc = 0; + for( int i = 3; i >= 0; --i ) crc = ( crc << 8 ) + trailer[i]; + if( crc != decoder.crc() ) + { std::fputs( "CRC mismatch\n", stderr ); retval = 2; } + + unsigned long long data_size = 0; + for( int i = 11; i >= 4; --i ) + data_size = ( data_size << 8 ) + trailer[i]; + if( data_size != decoder.data_position() ) + { std::fputs( "Data size mismatch\n", stderr ); retval = 2; } + + unsigned long long member_size = 0; + for( int i = 19; i >= 12; --i ) + member_size = ( member_size << 8 ) + trailer[i]; + if( member_size != decoder.member_position() ) + { std::fputs( "Member size mismatch\n", stderr ); retval = 2; } + if( retval ) return retval; + } + + if( std::fclose( stdout ) != 0 ) + { std::fprintf( stderr, "Error closing stdout: %s\n", + std::strerror( errno ) ); return 1; } + return 0; + } +@end verbatim + + +@node Concept index +@unnumbered Concept index + +@printindex cp + +@bye |