Adding debian version 1:10.5.12-1.debian/1%10.5.12-1debian

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

3 files changed, 188 insertions, 0 deletions

diff --git a/debian/tests/control b/debian/tests/control
new file mode 100644
index 00000000..16e091cf
--- /dev/null
+++ b/debian/tests/control
@@ -0,0 +1,11 @@
+Tests: smoke
+# RocksDB is not built for all archs. Rather than duplicating the condition
+# for its existence (see the list in debian/control), install it if available
+# and check in the test if it's functional when it should be.
+# The plugin package also already depends on the other one.
+Depends: mariadb-plugin-rocksdb | mariadb-server-10.5
+Restrictions: allow-stderr needs-root isolation-container
+
+Tests: upstream
+Depends: mariadb-test, eatmydata
+Restrictions: allow-stderr breaks-testbed
diff --git a/debian/tests/smoke b/debian/tests/smoke
new file mode 100644
index 00000000..4469205c
--- /dev/null
+++ b/debian/tests/smoke
@@ -0,0 +1,109 @@
+#!/bin/sh
+# dep8 smoke test for mysql-server
+# Author: Robie Basak <robie.basak at canonical.com>
+#
+# This test should be declared in debian/tests/control with a dependency
+# on the package that provides a configured MariaDB server (eg.
+# mariadb-server-10.5).
+#
+# This test should be declared in debian/tests/control with the
+# following restrictions:
+#
+# needs-root (to be able to log into the database)
+# allow-stderr
+#
+# This test:
+#
+# 1) Creates a test database and test user as the root user.
+#
+# 2) Creates a test table and checks it appears to operate normally
+# using the test user and test database.
+#
+# 3) Checks compression support for InnoDB & RocksDB engine.
+
+echo "Running test 'smoke'"
+set -ex
+
+# Start the daemon if it was not running. For example in Docker testing
+# environments there might not be any systemd et al and the service needs to
+# be started manually.
+if ! which systemctl
+then
+  if ! /etc/init.d/mariadb status
+  then
+    echo "Did not find systemctl and daemon was not running, starting it.."
+    /etc/init.d/mariadb start
+  fi
+else
+  # If systemd (and systemctl) is available, but the service did not start, then
+  # this smoke test is supposed to fail if next commands don't work.
+  echo "Found systemctl, continuing smoke test.."
+fi
+
+mysql <<EOT
+CREATE DATABASE testdatabase;
+CREATE USER 'testuser'@'localhost' identified by 'testpassword';
+GRANT ALL ON testdatabase.* TO 'testuser'@'localhost';
+EOT
+
+mysql testdatabase <<EOT
+CREATE TABLE foo (bar INTEGER);
+INSERT INTO foo (bar) VALUES (41);
+EOT
+
+result=$(echo 'SELECT bar+1 FROM foo;'|mysql --batch --skip-column-names --user=testuser --password=testpassword testdatabase)
+if [ "$result" != "42" ]; then
+       echo "Unexpected result" >&2
+       exit 1
+fi
+
+mysql --user=testuser --password=testpassword testdatabase <<EOT
+DROP TABLE foo;
+EOT
+
+mysql <<EOT
+DROP DATABASE testdatabase;
+DROP USER 'testuser'@'localhost';
+EOT
+
+# List based on what is advertised at
+# https://mariadb.com/kb/en/innodb-page-compression/#configuring-the-innodb-page-compression-algorithm
+# but disabled  with '#' the options that are not available in this binary build
+mariadb <<EOT
+SET GLOBAL innodb_compression_algorithm=lz4;
+#SET GLOBAL innodb_compression_algorithm=lzo;
+#SET GLOBAL innodb_compression_algorithm=lzma;
+#SET GLOBAL innodb_compression_algorithm=bzip2;
+SET GLOBAL innodb_compression_algorithm=snappy;
+SET GLOBAL innodb_compression_algorithm=zlib;
+SET GLOBAL innodb_compression_algorithm=none;
+EOT
+
+# Check whether RocksDB should be installed or not
+plugin=mariadb-plugin-rocksdb
+if [ "$(dpkg-architecture -qDEB_HOST_ARCH_BITS)" != 32 ] &&
+   [ "$(dpkg-architecture -qDEB_HOST_ARCH_ENDIAN)" = little ]
+  then
+  dpkg-query -W $plugin
+
+  LOG=/var/lib/mysql/#rocksdb/LOG
+  # XXX: The server may only be started during the install of
+  #      mariadb-server-10.5, which happens before that of the plugin.
+  [ -e $LOG ] || mysql -e "INSTALL PLUGIN RocksDB SONAME 'ha_rocksdb';"
+  # XXX: rocksdb_supported_compression_types variable does not report ZSTD.
+
+  # Print RocksDB supported items so test log is easier to debug
+  grep -F " supported:" $LOG
+
+  # Check that the expected compression methods are supported
+  for a in LZ4 Snappy Zlib ZSTD; do
+    if ! grep -qE "k$a(Compression)? supported: 1" $LOG
+    then
+      # Fail with explicit error message
+      echo "Error: Compression method $a not supported by RocksDB!" >&2
+      exit 1
+    fi
+  done
+else
+  ! dpkg-query -W $plugin
+fi
diff --git a/debian/tests/upstream b/debian/tests/upstream
new file mode 100644
index 00000000..d4f31dab
--- /dev/null
+++ b/debian/tests/upstream
@@ -0,0 +1,68 @@
+#!/bin/sh
+# autopkgtest check: Build and run the upstream test suite.
+# (C) 2012 Canonical Ltd.
+# Author: Daniel Kessel <d.kessel@gmx.de>
+
+# running the mysql testsuite as described in:
+# https://bugs.launchpad.net/ubuntu/+source/mysql-5.5/+bug/959683
+
+echo "Running test 'testsuite'"
+set -e
+
+SKIP_TEST_LST="/tmp/skip-test.lst"
+WORKDIR=$(mktemp -d)
+trap 'rm -rf $WORKDIR $SKIP_TEST_LST' 0 INT QUIT ABRT PIPE TERM
+cd "$WORKDIR"
+
+mkdir var
+mkdir tmp
+
+echo "using vardir: $WORKDIR/var"
+echo "using tmpdir: $WORKDIR/tmp"
+
+echo "Setting up skip-tests-list"
+
+# Use unstable-tests list as base to skip all tests  considered unstable
+cp /usr/share/mysql/mysql-test/unstable-tests $SKIP_TEST_LST
+
+# Also use arch specific skiplists if such files exist
+for filename in /usr/share/mysql/mysql-test/unstable-tests.*
+do
+  # Check for case that no files matched and glob is returned
+  [ -e "$filename" ] || continue
+  # Append file to the main skip test list file
+  cat "$filename" >> $SKIP_TEST_LST
+done
+
+# Skip tests that cannot run properly on ci.debian.net / autopkgtests.ubuntu.com
+cat >> $SKIP_TEST_LST << EOF
+binlog.binlog_server_start_options : Requires writable /usr
+main.ctype_uca : Requires writable /usr
+rpl.rpl_gtid_mode : Requires starting server as root ref http://bugs.mysql.com/bug.php?id=70517
+EOF
+
+# Skip tests that cannot run properly on Gitlab-CI
+if [ ! -z "$GITLAB_CI" ]
+then
+  cat >> $SKIP_TEST_LST << EOF
+main.mysqld--help : For unknown reason table-cache is 4000 instead of default 421
+EOF
+fi
+
+ARCH=$(dpkg --print-architecture)
+if [ "$ARCH" = "s390x" ]
+then
+  echo "main.func_regexp_pcre : recursion fails on s390x https://bugs.launchpad.net/ubuntu/+source/mariadb-10.1/+bug/1723947" >> $SKIP_TEST_LST
+elif [ "$ARCH" = "armhf" ] || [ "$ARCH" = "i386" ]
+then
+  echo "main.failed_auth_unixsocket : Test returns wrong exit code on armhf and i386 (but only in debci) https://jira.mariadb.org/browse/MDEV-23933" >> $SKIP_TEST_LST
+fi
+
+cd /usr/share/mysql/mysql-test
+echo "starting mysql-test-tun.pl..."
+eatmydata perl -I. ./mysql-test-run.pl --suite=main \
+    --vardir="$WORKDIR/var" --tmpdir="$WORKDIR/tmp" \
+    --parallel=auto --skip-rpl \
+    --force --skip-test-list=$SKIP_TEST_LST \
+    --xml-report=$AUTOPKGTEST_ARTIFACTS/mysql-test-run-junit.xml $@ 2>&1
+echo "run: OK"