diff options
Diffstat (limited to '')
| -rw-r--r-- | sql/sql_repl.cc | 4729 |
1 files changed, 4729 insertions, 0 deletions
diff --git a/sql/sql_repl.cc b/sql/sql_repl.cc new file mode 100644 index 00000000..ff2faca5 --- /dev/null +++ b/sql/sql_repl.cc @@ -0,0 +1,4729 @@ +/* Copyright (c) 2000, 2018, Oracle and/or its affiliates. + Copyright (c) 2008, 2020, MariaDB Corporation + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; version 2 of the License. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1335 USA */ + +#include "mariadb.h" +#include "sql_priv.h" +#include "unireg.h" +#include "sql_base.h" +#include "sql_parse.h" // check_access +#ifdef HAVE_REPLICATION + +#include "rpl_mi.h" +#include "rpl_rli.h" +#include "sql_repl.h" +#include "log_event.h" +#include "rpl_filter.h" +#include <my_dir.h> +#include "debug_sync.h" +#include "semisync_master.h" +#include "semisync_slave.h" +#include "mysys_err.h" + + +enum enum_gtid_until_state { + GTID_UNTIL_NOT_DONE, + GTID_UNTIL_STOP_AFTER_STANDALONE, + GTID_UNTIL_STOP_AFTER_TRANSACTION +}; + + +int max_binlog_dump_events = 0; // unlimited +my_bool opt_sporadic_binlog_dump_fail = 0; +#ifndef DBUG_OFF +static int binlog_dump_count = 0; +#endif + +extern TYPELIB binlog_checksum_typelib; + + +static int +fake_event_header(String* packet, Log_event_type event_type, ulong extra_len, + my_bool *do_checksum, ha_checksum *crc, const char** errmsg, + enum enum_binlog_checksum_alg checksum_alg_arg, uint32 end_pos) +{ + char header[LOG_EVENT_HEADER_LEN]; + ulong event_len; + + *do_checksum= checksum_alg_arg != BINLOG_CHECKSUM_ALG_OFF && + checksum_alg_arg != BINLOG_CHECKSUM_ALG_UNDEF; + + /* + 'when' (the timestamp) is set to 0 so that slave could distinguish between + real and fake Rotate events (if necessary) + */ + memset(header, 0, 4); + header[EVENT_TYPE_OFFSET] = (uchar)event_type; + event_len= LOG_EVENT_HEADER_LEN + extra_len + + (*do_checksum ? BINLOG_CHECKSUM_LEN : 0); + int4store(header + SERVER_ID_OFFSET, global_system_variables.server_id); + int4store(header + EVENT_LEN_OFFSET, event_len); + int2store(header + FLAGS_OFFSET, LOG_EVENT_ARTIFICIAL_F); + // TODO: check what problems this may cause and fix them + int4store(header + LOG_POS_OFFSET, end_pos); + if (packet->append(header, sizeof(header))) + { + *errmsg= "Failed due to out-of-memory writing event"; + return -1; + } + if (*do_checksum) + { + *crc= my_checksum(0, (uchar*)header, sizeof(header)); + } + return 0; +} + + +static int +fake_event_footer(String *packet, my_bool do_checksum, ha_checksum crc, const char **errmsg) +{ + if (do_checksum) + { + char b[BINLOG_CHECKSUM_LEN]; + int4store(b, crc); + if (packet->append(b, sizeof(b))) + { + *errmsg= "Failed due to out-of-memory writing event checksum"; + return -1; + } + } + return 0; +} + + +static int +fake_event_write(NET *net, String *packet, const char **errmsg) +{ + if (my_net_write(net, (uchar*) packet->ptr(), packet->length())) + { + *errmsg = "failed on my_net_write()"; + return -1; + } + return 0; +} + + +/* + Helper structure, used to pass miscellaneous info from mysql_binlog_send() + into the helper functions that it calls. +*/ +struct binlog_send_info { + rpl_binlog_state until_binlog_state; + slave_connection_state gtid_state; + THD *thd; + NET *net; + String *packet; + char *const log_file_name; // ptr/alias to linfo.log_file_name + slave_connection_state *until_gtid_state; + slave_connection_state until_gtid_state_obj; + Format_description_log_event *fdev; + int mariadb_slave_capability; + enum_gtid_skip_type gtid_skip_group; + enum_gtid_until_state gtid_until_group; + ushort flags; + enum enum_binlog_checksum_alg current_checksum_alg; + bool slave_gtid_strict_mode; + bool send_fake_gtid_list; + bool slave_gtid_ignore_duplicates; + bool using_gtid_state; + + int error; + const char *errmsg; + char error_text[MAX_SLAVE_ERRMSG]; + rpl_gtid error_gtid; + + ulonglong heartbeat_period; + + /** start file/pos as requested by slave, for error message */ + char start_log_file_name[FN_REFLEN]; + my_off_t start_pos; + + /** last pos for error message */ + my_off_t last_pos; + +#ifndef DBUG_OFF + int left_events; + uint dbug_reconnect_counter; + ulong hb_info_counter; +#endif + + bool clear_initial_log_pos; + bool should_stop; + size_t dirlen; + + binlog_send_info(THD *thd_arg, String *packet_arg, ushort flags_arg, + char *lfn) + : thd(thd_arg), net(&thd_arg->net), packet(packet_arg), + log_file_name(lfn), until_gtid_state(NULL), fdev(NULL), + gtid_skip_group(GTID_SKIP_NOT), gtid_until_group(GTID_UNTIL_NOT_DONE), + flags(flags_arg), current_checksum_alg(BINLOG_CHECKSUM_ALG_UNDEF), + slave_gtid_strict_mode(false), send_fake_gtid_list(false), + slave_gtid_ignore_duplicates(false), + error(0), + errmsg("Unknown error"), + heartbeat_period(0), +#ifndef DBUG_OFF + left_events(max_binlog_dump_events), + dbug_reconnect_counter(0), + hb_info_counter(0), +#endif + clear_initial_log_pos(false), + should_stop(false) + { + error_text[0] = 0; + bzero(&error_gtid, sizeof(error_gtid)); + until_binlog_state.init(); + } +}; + +// prototype +static int reset_transmit_packet(struct binlog_send_info *info, ushort flags, + ulong *ev_offset, const char **errmsg); + +/* + fake_rotate_event() builds a fake (=which does not exist physically in any + binlog) Rotate event, which contains the name of the binlog we are going to + send to the slave (because the slave may not know it if it just asked for + MASTER_LOG_FILE='', MASTER_LOG_POS=4). + < 4.0.14, fake_rotate_event() was called only if the requested pos was 4. + After this version we always call it, so that a 3.23.58 slave can rely on + it to detect if the master is 4.0 (and stop) (the _fake_ Rotate event has + zeros in the good positions which, by chance, make it possible for the 3.23 + slave to detect that this event is unexpected) (this is luck which happens + because the master and slave disagree on the size of the header of + Log_event). + + Relying on the event length of the Rotate event instead of these + well-placed zeros was not possible as Rotate events have a variable-length + part. +*/ + +static int fake_rotate_event(binlog_send_info *info, ulonglong position, + const char** errmsg, enum enum_binlog_checksum_alg checksum_alg_arg) +{ + DBUG_ENTER("fake_rotate_event"); + ulong ev_offset; + char buf[ROTATE_HEADER_LEN+100]; + my_bool do_checksum; + int err; + char* p = info->log_file_name+dirname_length(info->log_file_name); + uint ident_len = (uint) strlen(p); + String *packet= info->packet; + ha_checksum crc; + + /* reset transmit packet for the fake rotate event below */ + if (reset_transmit_packet(info, info->flags, &ev_offset, &info->errmsg)) + DBUG_RETURN(1); + + if ((err= fake_event_header(packet, ROTATE_EVENT, + ident_len + ROTATE_HEADER_LEN, &do_checksum, + &crc, + errmsg, checksum_alg_arg, 0))) + { + info->error= ER_UNKNOWN_ERROR; + DBUG_RETURN(err); + } + + int8store(buf+R_POS_OFFSET,position); + packet->append(buf, ROTATE_HEADER_LEN); + packet->append(p, ident_len); + + if (do_checksum) + { + crc= my_checksum(crc, (uchar*)buf, ROTATE_HEADER_LEN); + crc= my_checksum(crc, (uchar*)p, ident_len); + } + + if ((err= fake_event_footer(packet, do_checksum, crc, errmsg)) || + (err= fake_event_write(info->net, packet, errmsg))) + { + info->error= ER_UNKNOWN_ERROR; + DBUG_RETURN(err); + } + DBUG_RETURN(0); +} + + +static int fake_gtid_list_event(binlog_send_info *info, + Gtid_list_log_event *glev, const char** errmsg, + uint32 current_pos) +{ + my_bool do_checksum; + int err; + ha_checksum crc; + char buf[128]; + String str(buf, sizeof(buf), system_charset_info); + String* packet= info->packet; + + str.length(0); + if (glev->to_packet(&str)) + { + info->error= ER_UNKNOWN_ERROR; + *errmsg= "Failed due to out-of-memory writing Gtid_list event"; + return -1; + } + if ((err= fake_event_header(packet, GTID_LIST_EVENT, + str.length(), &do_checksum, &crc, + errmsg, info->current_checksum_alg, current_pos))) + { + info->error= ER_UNKNOWN_ERROR; + return err; + } + + packet->append(str); + if (do_checksum) + { + crc= my_checksum(crc, (uchar*)str.ptr(), str.length()); + } + + if ((err= fake_event_footer(packet, do_checksum, crc, errmsg)) || + (err= fake_event_write(info->net, packet, errmsg))) + { + info->error= ER_UNKNOWN_ERROR; + return err; + } + + return 0; +} + + +/* + Reset thread transmit packet buffer for event sending + + This function allocates header bytes for event transmission, and + should be called before store the event data to the packet buffer. +*/ +static int reset_transmit_packet(binlog_send_info *info, ushort flags, + ulong *ev_offset, const char **errmsg) +{ + int ret= 0; + String *packet= &info->thd->packet; + + /* reserve and set default header */ + packet->length(0); + packet->set("\0", 1, &my_charset_bin); + + if (info->thd->semi_sync_slave) + { + if (repl_semisync_master.reserve_sync_header(packet)) + { + info->error= ER_UNKNOWN_ERROR; + *errmsg= "Failed to run hook 'reserve_header'"; + ret= 1; + } + } + + *ev_offset= packet->length(); + return ret; +} + +int get_user_var_int(const char *name, + long long int *value, int *null_value) +{ + bool null_val; + user_var_entry *entry= + (user_var_entry*) my_hash_search(¤t_thd->user_vars, + (uchar*) name, strlen(name)); + if (!entry) + return 1; + *value= entry->val_int(&null_val); + if (null_value) + *null_value= null_val; + return 0; +} + +inline bool is_semi_sync_slave() +{ + int null_value; + long long val= 0; + get_user_var_int("rpl_semi_sync_slave", &val, &null_value); + return val; +} + +static int send_file(THD *thd) +{ + NET* net = &thd->net; + int fd = -1, error = 1; + size_t bytes; + char fname[FN_REFLEN+1]; + const char *errmsg = 0; + int old_timeout; + unsigned long packet_len; + uchar buf[IO_SIZE]; // It's safe to alloc this + DBUG_ENTER("send_file"); + + /* + The client might be slow loading the data, give him wait_timeout to do + the job + */ + old_timeout= net->read_timeout; + my_net_set_read_timeout(net, thd->variables.net_wait_timeout); + + /* + We need net_flush here because the client will not know it needs to send + us the file name until it has processed the load event entry + */ + if (unlikely(net_flush(net))) + { + read_error: + errmsg = "while reading file name"; + goto err; + } + packet_len= my_net_read(net); + if (unlikely(packet_len == packet_error)) + goto read_error; + + // terminate with \0 for fn_format + *((char*)net->read_pos + packet_len) = 0; + fn_format(fname, (char*) net->read_pos + 1, "", "", 4); + // this is needed to make replicate-ignore-db + if (!strcmp(fname,"/dev/null")) + goto end; + + if ((fd= mysql_file_open(key_file_send_file, + fname, O_RDONLY, MYF(0))) < 0) + { + errmsg = "on open of file"; + goto err; + } + + while ((long) (bytes= mysql_file_read(fd, buf, IO_SIZE, MYF(0))) > 0) + { + if (my_net_write(net, buf, bytes)) + { + errmsg = "while writing data to client"; + goto err; + } + } + + end: + if (my_net_write(net, (uchar*) "", 0) || net_flush(net) || + (my_net_read(net) == packet_error)) + { + errmsg = "while negotiating file transfer close"; + goto err; + } + error = 0; + + err: + my_net_set_read_timeout(net, old_timeout); + if (fd >= 0) + mysql_file_close(fd, MYF(0)); + if (errmsg) + { + sql_print_error("Failed in send_file() %s", errmsg); + DBUG_PRINT("error", ("%s", errmsg)); + } + DBUG_RETURN(error); +} + + +/** + Internal to mysql_binlog_send() routine that recalculates checksum for + 1. FD event (asserted) that needs additional arranment prior sending to slave. + 2. Start_encryption_log_event whose Ignored flag is set +TODO DBUG_ASSERT can be removed if this function is used for more general cases +*/ + +inline void fix_checksum(enum_binlog_checksum_alg checksum_alg, String *packet, + ulong ev_offset) +{ + if (checksum_alg == BINLOG_CHECKSUM_ALG_OFF || + checksum_alg == BINLOG_CHECKSUM_ALG_UNDEF) + return; + /* recalculate the crc for this event */ + uint data_len = uint4korr(packet->ptr() + ev_offset + EVENT_LEN_OFFSET); + ha_checksum crc; + DBUG_ASSERT((data_len == + LOG_EVENT_MINIMAL_HEADER_LEN + FORMAT_DESCRIPTION_HEADER_LEN + + BINLOG_CHECKSUM_ALG_DESC_LEN + BINLOG_CHECKSUM_LEN) || + (data_len == + LOG_EVENT_MINIMAL_HEADER_LEN + BINLOG_CRYPTO_SCHEME_LENGTH + + BINLOG_KEY_VERSION_LENGTH + BINLOG_NONCE_LENGTH + + BINLOG_CHECKSUM_LEN)); + crc= my_checksum(0, (uchar *)packet->ptr() + ev_offset, data_len - + BINLOG_CHECKSUM_LEN); + int4store(packet->ptr() + ev_offset + data_len - BINLOG_CHECKSUM_LEN, crc); +} + + +static user_var_entry * get_binlog_checksum_uservar(THD * thd) +{ + LEX_CSTRING name= { STRING_WITH_LEN("master_binlog_checksum")}; + user_var_entry *entry= + (user_var_entry*) my_hash_search(&thd->user_vars, (uchar*) name.str, + name.length); + return entry; +} + +/** + Function for calling in mysql_binlog_send + to check if slave initiated checksum-handshake. + + @param[in] thd THD to access a user variable + + @return TRUE if handshake took place, FALSE otherwise +*/ + +static bool is_slave_checksum_aware(THD * thd) +{ + DBUG_ENTER("is_slave_checksum_aware"); + user_var_entry *entry= get_binlog_checksum_uservar(thd); + DBUG_RETURN(entry? true : false); +} + +/** + Function for calling in mysql_binlog_send + to get the value of @@binlog_checksum of the master at + time of checksum-handshake. + + The value tells the master whether to compute or not, and the slave + to verify or not the first artificial Rotate event's checksum. + + @param[in] thd THD to access a user variable + + @return value of @@binlog_checksum alg according to + @c enum enum_binlog_checksum_alg +*/ + +static enum enum_binlog_checksum_alg get_binlog_checksum_value_at_connect(THD * thd) +{ + enum enum_binlog_checksum_alg ret; + + DBUG_ENTER("get_binlog_checksum_value_at_connect"); + user_var_entry *entry= get_binlog_checksum_uservar(thd); + if (!entry) + { + ret= BINLOG_CHECKSUM_ALG_UNDEF; + } + else + { + DBUG_ASSERT(entry->type == STRING_RESULT); + String str; + uint dummy_errors; + str.copy(entry->value, entry->length, &my_charset_bin, &my_charset_bin, + &dummy_errors); + ret= (enum_binlog_checksum_alg) + (find_type ((char*) str.ptr(), &binlog_checksum_typelib, 1) - 1); + DBUG_ASSERT(ret <= BINLOG_CHECKSUM_ALG_CRC32); // while it's just on CRC32 alg + } + DBUG_RETURN(ret); +} + + +/** + Set current_linfo + + Setting current_linfo needs to be done with LOCK_thd_data to ensure that + adjust_linfo_offsets doesn't use a structure that may be deleted. +*/ + +void THD::set_current_linfo(LOG_INFO *linfo) +{ + mysql_mutex_lock(&LOCK_thd_data); + current_linfo= linfo; + mysql_mutex_unlock(&LOCK_thd_data); +} + + +/* + Adjust the position pointer in the binary log file for all running slaves + + SYNOPSIS + adjust_linfo_offsets() + purge_offset Number of bytes removed from start of log index file + + NOTES + - This is called when doing a PURGE when we delete lines from the + index log file + + REQUIREMENTS + - Before calling this function, we have to ensure that no threads are + using any binary log file before purge_offset.a + + TODO + - Inform the slave threads that they should sync the position + in the binary log file with Relay_log_info::flush(). + Now they sync is done for next read. +*/ + +static my_bool adjust_callback(THD *thd, my_off_t *purge_offset) +{ + mysql_mutex_lock(&thd->LOCK_thd_data); + if (auto linfo= thd->current_linfo) + { + /* + Index file offset can be less that purge offset only if + we just started reading the index file. In that case + we have nothing to adjust + */ + if (linfo->index_file_offset < *purge_offset) + linfo->fatal= (linfo->index_file_offset != 0); + else + linfo->index_file_offset-= *purge_offset; + } + mysql_mutex_unlock(&thd->LOCK_thd_data); + return 0; +} + + +void adjust_linfo_offsets(my_off_t purge_offset) +{ + server_threads.iterate(adjust_callback, &purge_offset); +} + + +static my_bool log_in_use_callback(THD *thd, const char *log_name) +{ + my_bool result= 0; + mysql_mutex_lock(&thd->LOCK_thd_data); + if (auto linfo= thd->current_linfo) + result= !strcmp(log_name, linfo->log_file_name); + mysql_mutex_unlock(&thd->LOCK_thd_data); + return result; +} + + +bool log_in_use(const char* log_name) +{ + return server_threads.iterate(log_in_use_callback, log_name); +} + +bool purge_error_message(THD* thd, int res) +{ + uint errcode; + + if ((errcode= purge_log_get_error_code(res)) != 0) + { + my_message(errcode, ER_THD(thd, errcode), MYF(0)); + return TRUE; + } + my_ok(thd); + return FALSE; +} + + +/** + Execute a PURGE BINARY LOGS TO <log> command. + + @param thd Pointer to THD object for the client thread executing the + statement. + + @param to_log Name of the last log to purge. + + @retval FALSE success + @retval TRUE failure +*/ +bool purge_master_logs(THD* thd, const char* to_log) +{ + char search_file_name[FN_REFLEN]; + if (!mysql_bin_log.is_open()) + { + my_ok(thd); + return FALSE; + } + + mysql_bin_log.make_log_name(search_file_name, to_log); + return purge_error_message(thd, + mysql_bin_log.purge_logs(search_file_name, 0, 1, + 1, NULL)); +} + + +/** + Execute a PURGE BINARY LOGS BEFORE <date> command. + + @param thd Pointer to THD object for the client thread executing the + statement. + + @param purge_time Date before which logs should be purged. + + @retval FALSE success + @retval TRUE failure +*/ +bool purge_master_logs_before_date(THD* thd, time_t purge_time) +{ + if (!mysql_bin_log.is_open()) + { + my_ok(thd); + return 0; + } + return purge_error_message(thd, + mysql_bin_log.purge_logs_before_date(purge_time)); +} + +void set_read_error(binlog_send_info *info, int error) +{ + if (error == LOG_READ_EOF) + { + return; + } + info->error= ER_MASTER_FATAL_ERROR_READING_BINLOG; + switch (error) { + case LOG_READ_BOGUS: + info->errmsg= "bogus data in log event"; + break; + case LOG_READ_TOO_LARGE: + info->errmsg= "log event entry exceeded max_allowed_packet; " + "Increase max_allowed_packet on master"; + break; + case LOG_READ_IO: + info->errmsg= "I/O error reading log event"; + break; + case LOG_READ_MEM: + info->errmsg= "memory allocation failed reading log event"; + break; + case LOG_READ_TRUNC: + info->errmsg= "binlog truncated in the middle of event; " + "consider out of disk space on master"; + break; + case LOG_READ_CHECKSUM_FAILURE: + info->errmsg= "event read from binlog did not pass crc check"; + break; + case LOG_READ_DECRYPT: + info->errmsg= "event decryption failure"; + break; + default: + info->errmsg= "unknown error reading log event on the master"; + break; + } +} + + +/** + An auxiliary function for calling in mysql_binlog_send + to initialize the heartbeat timeout in waiting for a binlogged event. + + @param[in] thd THD to access a user variable + + @return heartbeat period an ulonglong of nanoseconds + or zero if heartbeat was not demanded by slave +*/ +static ulonglong get_heartbeat_period(THD * thd) +{ + bool null_value; + LEX_CSTRING name= { STRING_WITH_LEN("master_heartbeat_period")}; + user_var_entry *entry= + (user_var_entry*) my_hash_search(&thd->user_vars, (uchar*) name.str, + name.length); + return entry? entry->val_int(&null_value) : 0; +} + +/* + Lookup the capabilities of the slave, which it announces by setting a value + MARIA_SLAVE_CAPABILITY_XXX in @mariadb_slave_capability. + + Older MariaDB slaves, and other MySQL slaves, do not set + @mariadb_slave_capability, corresponding to a capability of + MARIA_SLAVE_CAPABILITY_UNKNOWN (0). +*/ +static int +get_mariadb_slave_capability(THD *thd) +{ + bool null_value; + const LEX_CSTRING name= { STRING_WITH_LEN("mariadb_slave_capability") }; + const user_var_entry *entry= + (user_var_entry*) my_hash_search(&thd->user_vars, (uchar*) name.str, + name.length); + return entry ? + (int)(entry->val_int(&null_value)) : MARIA_SLAVE_CAPABILITY_UNKNOWN; +} + + +/* + Get the value of the @slave_connect_state user variable into the supplied + String (this is the GTID connect state requested by the connecting slave). + + Returns false if error (ie. slave did not set the variable and does not + want to use GTID to set start position), true if success. +*/ +static bool +get_slave_connect_state(THD *thd, String *out_str) +{ + bool null_value; + + const LEX_CSTRING name= { STRING_WITH_LEN("slave_connect_state") }; + user_var_entry *entry= + (user_var_entry*) my_hash_search(&thd->user_vars, (uchar*) name.str, + name.length); + return entry && entry->val_str(&null_value, out_str, 0) && !null_value; +} + + +static bool +get_slave_gtid_strict_mode(THD *thd) +{ + bool null_value; + + const LEX_CSTRING name= { STRING_WITH_LEN("slave_gtid_strict_mode") }; + user_var_entry *entry= + (user_var_entry*) my_hash_search(&thd->user_vars, (uchar*) name.str, + name.length); + return entry && entry->val_int(&null_value) && !null_value; +} + + +static bool +get_slave_gtid_ignore_duplicates(THD *thd) +{ + bool null_value; + + const LEX_CSTRING name= { STRING_WITH_LEN("slave_gtid_ignore_duplicates") }; + user_var_entry *entry= + (user_var_entry*) my_hash_search(&thd->user_vars, (uchar*) name.str, + name.length); + return entry && entry->val_int(&null_value) && !null_value; +} + + +/* + Get the value of the @slave_until_gtid user variable into the supplied + String (this is the GTID position specified for START SLAVE UNTIL + master_gtid_pos='xxx'). + + Returns false if error (ie. slave did not set the variable and is not doing + START SLAVE UNTIL mater_gtid_pos='xxx'), true if success. +*/ +static bool +get_slave_until_gtid(THD *thd, String *out_str) +{ + bool null_value; + + const LEX_CSTRING name= { STRING_WITH_LEN("slave_until_gtid") }; + user_var_entry *entry= + (user_var_entry*) my_hash_search(&thd->user_vars, (uchar*) name.str, + name.length); + return entry && entry->val_str(&null_value, out_str, 0) && !null_value; +} + + +/* + Function prepares and sends repliation heartbeat event. + + @param net net object of THD + @param packet buffer to store the heartbeat instance + @param event_coordinates binlog file name and position of the last + real event master sent from binlog + + @note + Among three essential pieces of heartbeat data Log_event::when + is computed locally. + The error to send is serious and should force terminating + the dump thread. +*/ +static int send_heartbeat_event(binlog_send_info *info, + NET* net, String* packet, + const struct event_coordinates *coord, + enum enum_binlog_checksum_alg checksum_alg_arg) +{ + DBUG_ENTER("send_heartbeat_event"); + + ulong ev_offset; + char sub_header_buf[HB_SUB_HEADER_LEN]; + bool sub_header_in_use=false; + if (reset_transmit_packet(info, info->flags, &ev_offset, &info->errmsg)) + DBUG_RETURN(1); + + char header[LOG_EVENT_HEADER_LEN]; + my_bool do_checksum= checksum_alg_arg != BINLOG_CHECKSUM_ALG_OFF && + checksum_alg_arg != BINLOG_CHECKSUM_ALG_UNDEF; + /* + 'when' (the timestamp) is set to 0 so that slave could distinguish between + real and fake Rotate events (if necessary) + */ + memset(header, 0, 4); // when + + header[EVENT_TYPE_OFFSET] = HEARTBEAT_LOG_EVENT; + + char* p= coord->file_name + dirname_length(coord->file_name); + + size_t ident_len = strlen(p); + size_t event_len = ident_len + LOG_EVENT_HEADER_LEN + + (do_checksum ? BINLOG_CHECKSUM_LEN : 0); + int4store(header + SERVER_ID_OFFSET, global_system_variables.server_id); + DBUG_EXECUTE_IF("simulate_pos_4G", + { + const_cast<event_coordinates *>(coord)->pos= (UINT_MAX32 + (ulong)1); + DBUG_SET("-d, simulate_pos_4G"); + };); + if (coord->pos <= UINT_MAX32) + { + int4store(header + LOG_POS_OFFSET, coord->pos); // log_pos + } + else + { + // Set common_header.log_pos=0 to indicate its overflow + int4store(header + LOG_POS_OFFSET, 0); + sub_header_in_use= true; + int8store(sub_header_buf, coord->pos); + event_len+= HB_SUB_HEADER_LEN; + } + + int4store(header + EVENT_LEN_OFFSET, event_len); + int2store(header + FLAGS_OFFSET, 0); + + packet->append(header, sizeof(header)); + if (sub_header_in_use) + packet->append(sub_header_buf, sizeof(sub_header_buf)); + packet->append(p, ident_len); // log_file_name + + if (do_checksum) + { + char b[BINLOG_CHECKSUM_LEN]; + ha_checksum crc= my_checksum(0, (uchar*) header, sizeof(header)); + if (sub_header_in_use) + crc= my_checksum(crc, (uchar*) sub_header_buf, sizeof(sub_header_buf)); + crc= my_checksum(crc, (uchar*) p, ident_len); + int4store(b, crc); + packet->append(b, sizeof(b)); + } + + if (my_net_write(net, (uchar*) packet->ptr(), packet->length()) || + net_flush(net)) + { + info->error= ER_UNKNOWN_ERROR; + DBUG_RETURN(-1); + } + + DBUG_RETURN(0); +} + + +struct binlog_file_entry +{ + binlog_file_entry *next; + LEX_CSTRING name; + my_off_t size; +}; + +/** + Read all binary logs and return as a list + + @param memroot Use this for mem_root calls + @param reverse If set filenames returned in latest first order (reverse + order than in the index file) + @param already_locked If set, index file is already locked. + + @return 0 error + # pointer to list + + @notes + index_file is always unlocked at return +*/ + +static binlog_file_entry * +get_binlog_list(MEM_ROOT *memroot, bool reverse= true, + bool already_locked= false) +{ + IO_CACHE *index_file; + char *fname, *buff, *end_pos; + binlog_file_entry *current_list= NULL, *current_link= NULL, *e; + DBUG_ENTER("get_binlog_list"); + + if (!mysql_bin_log.is_open()) + { + if (already_locked) + mysql_bin_log.unlock_index(); + my_error(ER_NO_BINARY_LOGGING, MYF(0)); + DBUG_RETURN(NULL); + } + if (!already_locked) + mysql_bin_log.lock_index(); + index_file=mysql_bin_log.get_index_file(); + reinit_io_cache(index_file, READ_CACHE, (my_off_t) 0, 0, 0); + + if (!(buff= (char*) alloc_root(memroot, + (size_t) (index_file->end_of_file+1)))) + goto err; + if (my_b_read(index_file, (uchar*) buff, (size_t) index_file->end_of_file)) + { + my_error(EE_READ, MYF(ME_ERROR_LOG), my_filename(index_file->file), + my_errno); + goto err; + } + buff[index_file->end_of_file]= 0; // For strchr + mysql_bin_log.unlock_index(); + + /* The file ends with EOF or empty line */ + for (fname= buff; + (end_pos= strchr(fname, '\n')) && (end_pos - fname) > 1; + fname= end_pos+1) + { + end_pos[0]= '\0'; // remove the newline + if (!(e= (binlog_file_entry *) alloc_root(memroot, sizeof(*e)))) + DBUG_RETURN(NULL); + if (reverse) + { + e->next= current_list; + current_list= e; + } + else + { + e->next= NULL; + if (!current_link) + current_list= e; + else + current_link->next= e; + current_link= e; + } + e->name.str= fname; + e->name.length= (size_t) (end_pos - fname); + } + DBUG_RETURN(current_list); + +err: + mysql_bin_log.unlock_index(); + DBUG_RETURN(0); +} + + +/* + Check if every GTID requested by the slave is contained in this (or a later) + binlog file. Return true if so, false if not. + + We do the check with a single scan of the list of GTIDs, avoiding the need + to build an in-memory hash or stuff like that. + + We need to check that slave did not request GTID D-S-N1, when the + Gtid_list_log_event for this binlog file has D-S-N2 with N2 >= N1. + (Because this means that requested GTID is in an earlier binlog). + However, if the Gtid_list_log_event indicates that D-S-N1 is the very last + GTID for domain D in prior binlog files, then it is ok to start from the + very start of this binlog file. This special case is important, as it + allows to purge old logs even if some domain is unused for long. + + In addition, we need to check that we do not have a GTID D-S-N3 in the + Gtid_list_log_event where D is not present in the requested slave state at + all. Since if D is not in requested slave state, it means that slave needs + to start at the very first GTID in domain D. +*/ +static bool +contains_all_slave_gtid(slave_connection_state *st, Gtid_list_log_event *glev) +{ + uint32 i; + + for (i= 0; i < glev->count; ++i) + { + uint32 gl_domain_id= glev->list[i].domain_id; + const rpl_gtid *gtid= st->find(gl_domain_id); + if (!gtid) + { + /* + The slave needs to start from the very beginning of this domain, which + is in an earlier binlog file. So we need to search back further. + */ + return false; + } + if (gtid->server_id == glev->list[i].server_id && + gtid->seq_no <= glev->list[i].seq_no) + { + /* + The slave needs to start after gtid, but it is contained in an earlier + binlog file. So we need to search back further, unless it was the very + last gtid logged for the domain in earlier binlog files. + */ + if (gtid->seq_no < glev->list[i].seq_no) + return false; + + /* + The slave requested D-S-N1, which happens to be the last GTID logged + in prior binlog files with same domain id D and server id S. + + The Gtid_list is kept sorted on domain_id, with the last GTID in each + domain_id group being the last one logged. So if this is the last GTID + within the domain_id group, then it is ok to start from the very + beginning of this group, per the special case explained in comment at + the start of this function. If not, then we need to search back further. + */ + if (i+1 < glev->count && gl_domain_id == glev->list[i+1].domain_id) + return false; + } + } + + return true; +} + + +static void +give_error_start_pos_missing_in_binlog(int *err, const char **errormsg, + rpl_gtid *error_gtid) +{ + rpl_gtid binlog_gtid; + + if (mysql_bin_log.lookup_domain_in_binlog_state(error_gtid->domain_id, + &binlog_gtid) && + binlog_gtid.seq_no >= error_gtid->seq_no) + { + *errormsg= "Requested slave GTID state not found in binlog. The slave has " + "probably diverged due to executing erroneous transactions"; + *err= ER_GTID_POSITION_NOT_FOUND_IN_BINLOG2; + } + else + { + *errormsg= "Requested slave GTID state not found in binlog"; + *err= ER_GTID_POSITION_NOT_FOUND_IN_BINLOG; + } +} + + +/* + Check the start GTID state requested by the slave against our binlog state. + + Give an error if the slave requests something that we do not have in our + binlog. +*/ + +static int +check_slave_start_position(binlog_send_info *info, const char **errormsg, + rpl_gtid *error_gtid) +{ + uint32 i; + int err; + slave_connection_state::entry **delete_list= NULL; + uint32 delete_idx= 0; + slave_connection_state *st= &info->gtid_state; + + if (rpl_load_gtid_slave_state(info->thd)) + { + *errormsg= "Failed to load replication slave GTID state"; + err= ER_CANNOT_LOAD_SLAVE_GTID_STATE; + goto end; + } + + for (i= 0; i < st->hash.records; ++i) + { + slave_connection_state::entry *slave_gtid_entry= + (slave_connection_state::entry *)my_hash_element(&st->hash, i); + rpl_gtid *slave_gtid= &slave_gtid_entry->gtid; + rpl_gtid master_gtid; + rpl_gtid master_replication_gtid; + rpl_gtid start_gtid; + bool start_at_own_slave_pos= + rpl_global_gtid_slave_state->domain_to_gtid(slave_gtid->domain_id, + &master_replication_gtid) && + slave_gtid->server_id == master_replication_gtid.server_id && + slave_gtid->seq_no == master_replication_gtid.seq_no; + + if (mysql_bin_log.find_in_binlog_state(slave_gtid->domain_id, + slave_gtid->server_id, + &master_gtid) && + master_gtid.seq_no >= slave_gtid->seq_no) + { + /* + If connecting slave requests to start at the GTID we last applied when + we were ourselves a slave, then this GTID may not exist in our binlog + (in case of --log-slave-updates=0). So set the flag to disable the + error about missing GTID in the binlog in this case. + */ + if (start_at_own_slave_pos) + slave_gtid_entry->flags|= slave_connection_state::START_OWN_SLAVE_POS; + continue; + } + + if (!start_at_own_slave_pos) + { + rpl_gtid domain_gtid; + slave_connection_state *until_gtid_state= info->until_gtid_state; + rpl_gtid *until_gtid; + + if (!mysql_bin_log.lookup_domain_in_binlog_state(slave_gtid->domain_id, + &domain_gtid)) + { + /* + We do not have anything in this domain, neither in the binlog nor + in the slave state. So we are probably one master in a multi-master + setup, and this domain is served by a different master. + + But set a flag so that if we then ever _do_ happen to encounter + anything in this domain, then we will re-check that the requested + slave position exists, and give the error at that time if not. + */ + slave_gtid_entry->flags|= slave_connection_state::START_ON_EMPTY_DOMAIN; + continue; + } + + if (info->slave_gtid_ignore_duplicates && + domain_gtid.seq_no < slave_gtid->seq_no) + { + /* + When --gtid-ignore-duplicates, it is ok for the slave to request + something that we do not have (yet) - they might already have gotten + it through another path in a multi-path replication hierarchy. + */ + continue; + } + + if (until_gtid_state && + ( !(until_gtid= until_gtid_state->find(slave_gtid->domain_id)) || + (mysql_bin_log.find_in_binlog_state(until_gtid->domain_id, + until_gtid->server_id, + &master_gtid) && + master_gtid.seq_no >= until_gtid->seq_no))) + { + /* + The slave requested to start from a position that is not (yet) in + our binlog, but it also specified an UNTIL condition that _is_ in + our binlog (or a missing UNTIL, which means stop at the very + beginning). So the stop position is before the start position, and + we just delete the entry from the UNTIL hash to mark that this + domain has already reached the UNTIL condition. + */ + if(until_gtid) + until_gtid_state->remove(until_gtid); + continue; + } + + *error_gtid= *slave_gtid; + give_error_start_pos_missing_in_binlog(&err, errormsg, error_gtid); + goto end; + } + + /* + Ok, so connecting slave asked to start at a GTID that we do not have in + our binlog, but it was in fact the last GTID we applied earlier, when we + were acting as a replication slave. + + So this means that we were running as a replication slave without + --log-slave-updates, but now we switched to be a master. It is worth it + to handle this special case, as it allows users to run a simple + master -> slave without --log-slave-updates, and then exchange slave and + master, as long as they make sure the slave is caught up before switching. + */ + + /* + First check if we logged something ourselves as a master after being a + slave. This will be seen as a GTID with our own server_id and bigger + seq_no than what is in the slave state. + + If we did not log anything ourselves, then start the connecting slave + replicating from the current binlog end position, which in this case + corresponds to our replication slave state and hence what the connecting + slave is requesting. + */ + if (mysql_bin_log.find_in_binlog_state(slave_gtid->domain_id, + global_system_variables.server_id, + &start_gtid) && + start_gtid.seq_no > slave_gtid->seq_no) + { + /* + Start replication within this domain at the first GTID that we logged + ourselves after becoming a master. + + Remember that this starting point is in fact a "fake" GTID which may + not exists in the binlog, so that we do not complain about it in + --gtid-strict-mode. + */ + slave_gtid->server_id= global_system_variables.server_id; + slave_gtid_entry->flags|= slave_connection_state::START_OWN_SLAVE_POS; + } + else if (mysql_bin_log.lookup_domain_in_binlog_state(slave_gtid->domain_id, + &start_gtid)) + { + slave_gtid->server_id= start_gtid.server_id; + slave_gtid->seq_no= start_gtid.seq_no; + } + else + { + /* + We do not have _anything_ in our own binlog for this domain. Just + delete the entry in the slave connection state, then it will pick up + anything new that arrives. + + We just queue up the deletion and do it later, after the loop, so that + we do not mess up the iteration over the hash. + */ + if (!delete_list) + { + if (!(delete_list= (slave_connection_state::entry **) + my_malloc(PSI_INSTRUMENT_ME, + sizeof(*delete_list) * st->hash.records, MYF(MY_WME)))) + { + *errormsg= "Out of memory while checking slave start position"; + err= ER_OUT_OF_RESOURCES; + goto end; + } + } + delete_list[delete_idx++]= slave_gtid_entry; + } + } + + /* Do any delayed deletes from the hash. */ + if (delete_list) + { + for (i= 0; i < delete_idx; ++i) + st->remove(&(delete_list[i]->gtid)); + } + err= 0; + +end: + if (delete_list) + my_free(delete_list); + return err; +} + +/* + Find the name of the binlog file to start reading for a slave that connects + using GTID state. + + Returns the file name in out_name, which must be of size at least FN_REFLEN. + + Returns NULL on ok, error message on error. + + In case of non-error return, the returned binlog file is guaranteed to + contain the first event to be transmitted to the slave for every domain + present in our binlogs. It is still necessary to skip all GTIDs up to + and including the GTID requested by slave within each domain. + + However, as a special case, if the event to be sent to the slave is the very + first event (within that domain) in the returned binlog, then nothing should + be skipped, so that domain is deleted from the passed in slave connection + state. + + This is necessary in case the slave requests a GTID within a replication + domain that has long been inactive. The binlog file containing that GTID may + have been long since purged. However, as long as no GTIDs after that have + been purged, we have the GTID requested by slave in the Gtid_list_log_event + of the latest binlog. So we can start from there, as long as we delete the + corresponding entry in the slave state so we do not wrongly skip any events + that might turn up if that domain becomes active again, vainly looking for + the requested GTID that was already purged. +*/ +static const char * +gtid_find_binlog_file(slave_connection_state *state, char *out_name, + slave_connection_state *until_gtid_state) +{ + MEM_ROOT memroot; + binlog_file_entry *list; + Gtid_list_log_event *glev= NULL; + const char *errormsg= NULL; + char buf[FN_REFLEN]; + + init_alloc_root(PSI_INSTRUMENT_ME, &memroot, + 10*(FN_REFLEN+sizeof(binlog_file_entry)), 0, + MYF(MY_THREAD_SPECIFIC)); + if (!(list= get_binlog_list(&memroot))) + { + errormsg= "Out of memory while looking for GTID position in binlog"; + goto end; + } + + while (list) + { + File file; + IO_CACHE cache; + + if (!list->next) + { + /* + It should be safe to read the currently used binlog, as we will only + read the header part that is already written. + + But if that does not work on windows, then we will need to cache the + event somewhere in memory I suppose - that could work too. + */ + } + /* + Read the Gtid_list_log_event at the start of the binlog file to + get the binlog state. + */ + if (normalize_binlog_name(buf, list->name.str, false)) + { + errormsg= "Failed to determine binlog file name while looking for " + "GTID position in binlog"; + goto end; + } + bzero((char*) &cache, sizeof(cache)); + if (unlikely((file= open_binlog(&cache, buf, &errormsg)) == (File)-1)) + goto end; + errormsg= get_gtid_list_event(&cache, &glev); + end_io_cache(&cache); + mysql_file_close(file, MYF(MY_WME)); + if (unlikely(errormsg)) + goto end; + + if (!glev || contains_all_slave_gtid(state, glev)) + { + strmake(out_name, buf, FN_REFLEN); + + if (glev) + { + uint32 i; + + /* + As a special case, we allow to start from binlog file N if the + requested GTID is the last event (in the corresponding domain) in + binlog file (N-1), but then we need to remove that GTID from the slave + state, rather than skipping events waiting for it to turn up. + + If slave is doing START SLAVE UNTIL, check for any UNTIL conditions + that are already included in a previous binlog file. Delete any such + from the UNTIL hash, to mark that such domains have already reached + their UNTIL condition. + */ + for (i= 0; i < glev->count; ++i) + { + const rpl_gtid *gtid= state->find(glev->list[i].domain_id); + if (!gtid) + { + /* + Contains_all_slave_gtid() returns false if there is any domain in + Gtid_list_event which is not in the requested slave position. + + We may delete a domain from the slave state inside this loop, but + we only do this when it is the very last GTID logged for that + domain in earlier binlogs, and then we can not encounter it in any + further GTIDs in the Gtid_list. + */ + DBUG_ASSERT(0); + } else if (gtid->server_id == glev->list[i].server_id && + gtid->seq_no == glev->list[i].seq_no) + { + /* + The slave requested to start from the very beginning of this + domain in this binlog file. So delete the entry from the state, + we do not need to skip anything. + */ + state->remove(gtid); + } + + if (until_gtid_state && + (gtid= until_gtid_state->find(glev->list[i].domain_id)) && + gtid->server_id == glev->list[i].server_id && + gtid->seq_no <= glev->list[i].seq_no) + { + /* + We've already reached the stop position in UNTIL for this domain, + since it is before the start position. + */ + until_gtid_state->remove(gtid); + } + } + } + + goto end; + } + delete glev; + glev= NULL; + list= list->next; + } + + /* We reached the end without finding anything. */ + errormsg= "Could not find GTID state requested by slave in any binlog " + "files. Probably the slave state is too old and required binlog files " + "have been purged."; + +end: + if (glev) + delete glev; + + free_root(&memroot, MYF(0)); + return errormsg; +} + + +/* + Given an old-style binlog position with file name and file offset, find the + corresponding gtid position. If the offset is not at an event boundary, give + an error. + + Return NULL on ok, error message string on error. + + ToDo: Improve the performance of this by using binlog index files. +*/ +static const char * +gtid_state_from_pos(const char *name, uint32 offset, + slave_connection_state *gtid_state) +{ + IO_CACHE cache; + File file; + const char *errormsg= NULL; + bool found_gtid_list_event= false; + bool found_format_description_event= false; + bool valid_pos= false; + enum enum_binlog_checksum_alg current_checksum_alg= BINLOG_CHECKSUM_ALG_UNDEF; + int err; + String packet; + Format_description_log_event *fdev= NULL; + + if (unlikely(gtid_state->load((const rpl_gtid *)NULL, 0))) + { + errormsg= "Internal error (out of memory?) initializing slave state " + "while scanning binlog to find start position"; + return errormsg; + } + + if (unlikely((file= open_binlog(&cache, name, &errormsg)) == (File)-1)) + return errormsg; + + if (!(fdev= new Format_description_log_event(3))) + { + errormsg= "Out of memory initializing format_description event " + "while scanning binlog to find start position"; + goto end; + } + + /* + First we need to find the initial GTID_LIST_EVENT. We need this even + if the offset is at the very start of the binlog file. + + But if we do not find any GTID_LIST_EVENT, then this is an old binlog + with no GTID information, so we return empty GTID state. + */ + for (;;) + { + Log_event_type typ; + uint32 cur_pos; + + cur_pos= (uint32)my_b_tell(&cache); + if (cur_pos == offset) + valid_pos= true; + if (found_format_description_event && found_gtid_list_event && + cur_pos >= offset) + break; + + packet.length(0); + err= Log_event::read_log_event(&cache, &packet, fdev, + opt_master_verify_checksum ? current_checksum_alg + : BINLOG_CHECKSUM_ALG_OFF); + if (unlikely(err)) + { + errormsg= "Could not read binlog while searching for slave start " + "position on master"; + goto end; + } + /* + The cast to uchar is needed to avoid a signed char being converted to a + negative number. + */ + typ= (Log_event_type)(uchar)packet[EVENT_TYPE_OFFSET]; + if (typ == FORMAT_DESCRIPTION_EVENT) + { + Format_description_log_event *tmp; + + if (unlikely(found_format_description_event)) + { + errormsg= "Duplicate format description log event found while " + "searching for old-style position in binlog"; + goto end; + } + + current_checksum_alg= get_checksum_alg(packet.ptr(), packet.length()); + found_format_description_event= true; + if (unlikely(!(tmp= new Format_description_log_event(packet.ptr(), + packet.length(), + fdev)))) + { + errormsg= "Corrupt Format_description event found or out-of-memory " + "while searching for old-style position in binlog"; + goto end; + } + delete fdev; + fdev= tmp; + } + else if (typ == START_ENCRYPTION_EVENT) + { + uint sele_len = packet.length(); + if (current_checksum_alg == BINLOG_CHECKSUM_ALG_CRC32) + { + sele_len -= BINLOG_CHECKSUM_LEN; + } + Start_encryption_log_event sele(packet.ptr(), sele_len, fdev); + if (fdev->start_decryption(&sele)) + { + errormsg= "Could not start decryption of binlog."; + goto end; + } + } + else if (unlikely(typ != FORMAT_DESCRIPTION_EVENT && + !found_format_description_event)) + { + errormsg= "Did not find format description log event while searching " + "for old-style position in binlog"; + goto end; + } + else if (typ == ROTATE_EVENT || typ == STOP_EVENT || + typ == BINLOG_CHECKPOINT_EVENT) + continue; /* Continue looking */ + else if (typ == GTID_LIST_EVENT) + { + rpl_gtid *gtid_list; + bool status; + uint32 list_len; + + if (unlikely(found_gtid_list_event)) + { + errormsg= "Found duplicate Gtid_list_log_event while scanning binlog " + "to find slave start position"; + goto end; + } + status= Gtid_list_log_event::peek(packet.ptr(), packet.length(), + current_checksum_alg, + >id_list, &list_len, fdev); + if (unlikely(status)) + { + errormsg= "Error reading Gtid_list_log_event while searching " + "for old-style position in binlog"; + goto end; + } + err= gtid_state->load(gtid_list, list_len); + my_free(gtid_list); + if (unlikely(err)) + { + errormsg= "Internal error (out of memory?) initialising slave state " + "while scanning binlog to find start position"; + goto end; + } + found_gtid_list_event= true; + } + else if (unlikely(!found_gtid_list_event)) + { + /* We did not find any Gtid_list_log_event, must be old binlog. */ + goto end; + } + else if (typ == GTID_EVENT) + { + rpl_gtid gtid; + uchar flags2; + if (unlikely(Gtid_log_event::peek(packet.ptr(), packet.length(), + current_checksum_alg, >id.domain_id, + >id.server_id, >id.seq_no, &flags2, + fdev))) + { + errormsg= "Corrupt gtid_log_event found while scanning binlog to find " + "initial slave position"; + goto end; + } + if (unlikely(gtid_state->update(>id))) + { + errormsg= "Internal error (out of memory?) updating slave state while " + "scanning binlog to find start position"; + goto end; + } + } + } + + if (unlikely(!valid_pos)) + { + errormsg= "Slave requested incorrect position in master binlog. " + "Requested position %u in file '%s', but this position does not " + "correspond to the location of any binlog event."; + } + +end: + delete fdev; + end_io_cache(&cache); + mysql_file_close(file, MYF(MY_WME)); + + return errormsg; +} + + +int +gtid_state_from_binlog_pos(const char *in_name, uint32 pos, String *out_str) +{ + slave_connection_state gtid_state; + const char *lookup_name; + char name_buf[FN_REFLEN]; + LOG_INFO linfo; + + if (!mysql_bin_log.is_open()) + { + my_error(ER_NO_BINARY_LOGGING, MYF(0)); + return 1; + } + + if (in_name && in_name[0]) + { + mysql_bin_log.make_log_name(name_buf, in_name); + lookup_name= name_buf; + } + else + lookup_name= NULL; + linfo.index_file_offset= 0; + if (mysql_bin_log.find_log_pos(&linfo, lookup_name, 1)) + return 1; + + if (pos < 4) + pos= 4; + + if (gtid_state_from_pos(linfo.log_file_name, pos, >id_state) || + gtid_state.to_string(out_str)) + return 1; + return 0; +} + + +static bool +is_until_reached(binlog_send_info *info, ulong *ev_offset, + Log_event_type event_type, const char **errmsg, + uint32 current_pos) +{ + switch (info->gtid_until_group) + { + case GTID_UNTIL_NOT_DONE: + return false; + case GTID_UNTIL_STOP_AFTER_STANDALONE: + if (Log_event::is_part_of_group(event_type)) + return false; + break; + case GTID_UNTIL_STOP_AFTER_TRANSACTION: + if (event_type != XID_EVENT && event_type != XA_PREPARE_LOG_EVENT && + (event_type != QUERY_EVENT || /* QUERY_COMPRESSED_EVENT would never be commmit or rollback */ + !Query_log_event::peek_is_commit_rollback + (info->packet->ptr()+*ev_offset, + info->packet->length()-*ev_offset, + info->current_checksum_alg))) + return false; + break; + } + + /* + The last event group has been sent, now the START SLAVE UNTIL condition + has been reached. + + Send a last fake Gtid_list_log_event with a flag set to mark that we + stop due to UNTIL condition. + */ + if (reset_transmit_packet(info, info->flags, ev_offset, errmsg)) + return true; + Gtid_list_log_event glev(&info->until_binlog_state, + Gtid_list_log_event::FLAG_UNTIL_REACHED); + if (fake_gtid_list_event(info, &glev, errmsg, current_pos)) + return true; + *errmsg= NULL; + return true; +} + + +/* + Helper function for mysql_binlog_send() to write an event down the slave + connection. + + Returns NULL on success, error message string on error. +*/ +static const char * +send_event_to_slave(binlog_send_info *info, Log_event_type event_type, + IO_CACHE *log, ulong ev_offset, rpl_gtid *error_gtid) +{ + my_off_t pos; + String* const packet= info->packet; + size_t len= packet->length(); + int mariadb_slave_capability= info->mariadb_slave_capability; + enum enum_binlog_checksum_alg current_checksum_alg= info->current_checksum_alg; + slave_connection_state *gtid_state= &info->gtid_state; + slave_connection_state *until_gtid_state= info->until_gtid_state; + bool need_sync= false; + + if (event_type == GTID_LIST_EVENT && + info->using_gtid_state && until_gtid_state) + { + rpl_gtid *gtid_list; + uint32 list_len; + bool err; + + if (ev_offset > len || + Gtid_list_log_event::peek(packet->ptr()+ev_offset, len - ev_offset, + current_checksum_alg, + >id_list, &list_len, info->fdev)) + { + info->error= ER_MASTER_FATAL_ERROR_READING_BINLOG; + return "Failed to read Gtid_list_log_event: corrupt binlog"; + } + err= info->until_binlog_state.load(gtid_list, list_len); + my_free(gtid_list); + if (err) + { + info->error= ER_MASTER_FATAL_ERROR_READING_BINLOG; + return "Failed in internal GTID book-keeping: Out of memory"; + } + } + + /* Skip GTID event groups until we reach slave position within a domain_id. */ + if (event_type == GTID_EVENT && info->using_gtid_state) + { + uchar flags2; + slave_connection_state::entry *gtid_entry; + rpl_gtid *gtid; + + if (gtid_state->count() > 0 || until_gtid_state) + { + rpl_gtid event_gtid; + + if (ev_offset > len || + Gtid_log_event::peek(packet->ptr()+ev_offset, len - ev_offset, + current_checksum_alg, + &event_gtid.domain_id, &event_gtid.server_id, + &event_gtid.seq_no, &flags2, info->fdev)) + { + info->error= ER_MASTER_FATAL_ERROR_READING_BINLOG; + return "Failed to read Gtid_log_event: corrupt binlog"; + } + + DBUG_EXECUTE_IF("gtid_force_reconnect_at_10_1_100", + { + rpl_gtid *dbug_gtid; + if ((dbug_gtid= info->until_binlog_state.find_nolock(10,1)) && + dbug_gtid->seq_no == 100) + { + DBUG_SET("-d,gtid_force_reconnect_at_10_1_100"); + DBUG_SET_INITIAL("-d,gtid_force_reconnect_at_10_1_100"); + info->error= ER_UNKNOWN_ERROR; + return "DBUG-injected forced reconnect"; + } + }); + + if (info->until_binlog_state.update_nolock(&event_gtid, false)) + { + info->error= ER_MASTER_FATAL_ERROR_READING_BINLOG; + return "Failed in internal GTID book-keeping: Out of memory"; + } + + if (gtid_state->count() > 0) + { + gtid_entry= gtid_state->find_entry(event_gtid.domain_id); + if (gtid_entry != NULL) + { + gtid= >id_entry->gtid; + if (gtid_entry->flags & slave_connection_state::START_ON_EMPTY_DOMAIN) + { + rpl_gtid master_gtid; + if (!mysql_bin_log.find_in_binlog_state(gtid->domain_id, + gtid->server_id, + &master_gtid) || + master_gtid.seq_no < gtid->seq_no) + { + int err; + const char *errormsg; + *error_gtid= *gtid; + give_error_start_pos_missing_in_binlog(&err, &errormsg, error_gtid); + info->error= err; + return errormsg; + } + gtid_entry->flags&= ~(uint32)slave_connection_state::START_ON_EMPTY_DOMAIN; + } + + /* Skip this event group if we have not yet reached slave start pos. */ + if (event_gtid.server_id != gtid->server_id || + event_gtid.seq_no <= gtid->seq_no) + info->gtid_skip_group= (flags2 & Gtid_log_event::FL_STANDALONE ? + GTID_SKIP_STANDALONE : GTID_SKIP_TRANSACTION); + if (event_gtid.server_id == gtid->server_id && + event_gtid.seq_no >= gtid->seq_no) + { + if (info->slave_gtid_strict_mode && + event_gtid.seq_no > gtid->seq_no && + !(gtid_entry->flags & slave_connection_state::START_OWN_SLAVE_POS)) + { + /* + In strict mode, it is an error if the slave requests to start + in a "hole" in the master's binlog: a GTID that does not + exist, even though both the prior and subsequent seq_no exists + for same domain_id and server_id. + */ + info->error= ER_GTID_START_FROM_BINLOG_HOLE; + *error_gtid= *gtid; + return "The binlog on the master is missing the GTID requested " + "by the slave (even though both a prior and a subsequent " + "sequence number does exist), and GTID strict mode is enabled."; + } + + /* + Send a fake Gtid_list event to the slave. + This allows the slave to update its current binlog position + so MASTER_POS_WAIT() and MASTER_GTID_WAIT() can work. + The fake event will be sent at the end of this event group. + */ + info->send_fake_gtid_list= true; + + /* + Delete this entry if we have reached slave start position (so we + will not skip subsequent events and won't have to look them up + and check). + */ + gtid_state->remove(gtid); + } + } + } + + if (until_gtid_state) + { + gtid= until_gtid_state->find(event_gtid.domain_id); + if (gtid == NULL) + { + /* + This domain already reached the START SLAVE UNTIL stop condition, + so skip this event group. + */ + info->gtid_skip_group = (flags2 & Gtid_log_event::FL_STANDALONE ? + GTID_SKIP_STANDALONE : GTID_SKIP_TRANSACTION); + } + else if (event_gtid.server_id == gtid->server_id && + event_gtid.seq_no >= gtid->seq_no) + { + /* + We have reached the stop condition. + Delete this domain_id from the hash, so we will skip all further + events in this domain and eventually stop when all domains are + done. + */ + uint64 until_seq_no= gtid->seq_no; + until_gtid_state->remove(gtid); + if (until_gtid_state->count() == 0) + info->gtid_until_group= (flags2 & Gtid_log_event::FL_STANDALONE ? + GTID_UNTIL_STOP_AFTER_STANDALONE : + GTID_UNTIL_STOP_AFTER_TRANSACTION); + if (event_gtid.seq_no > until_seq_no) + { + /* + The GTID in START SLAVE UNTIL condition is missing in our binlog. + This should normally not happen (user error), but since we can be + sure that we are now beyond the position that the UNTIL condition + should be in, we can just stop now. And we also need to skip this + event group (as it is beyond the UNTIL condition). + */ + info->gtid_skip_group = (flags2 & Gtid_log_event::FL_STANDALONE ? + GTID_SKIP_STANDALONE : GTID_SKIP_TRANSACTION); + } + } + } + } + } + + /* + Skip event group if we have not yet reached the correct slave GTID position. + + Note that slave that understands GTID can also tolerate holes, so there is + no need to supply dummy event. + */ + switch (info->gtid_skip_group) + { + case GTID_SKIP_STANDALONE: + if (!Log_event::is_part_of_group(event_type)) + info->gtid_skip_group= GTID_SKIP_NOT; + return NULL; + case GTID_SKIP_TRANSACTION: + if (event_type == XID_EVENT || event_type == XA_PREPARE_LOG_EVENT || + (event_type == QUERY_EVENT && /* QUERY_COMPRESSED_EVENT would never be commmit or rollback */ + Query_log_event::peek_is_commit_rollback(packet->ptr() + ev_offset, + len - ev_offset, + current_checksum_alg))) + info->gtid_skip_group= GTID_SKIP_NOT; + return NULL; + case GTID_SKIP_NOT: + break; + } + + /* Do not send annotate_rows events unless slave requested it. */ + if (event_type == ANNOTATE_ROWS_EVENT && + !(info->flags & BINLOG_SEND_ANNOTATE_ROWS_EVENT)) + { + if (mariadb_slave_capability >= MARIA_SLAVE_CAPABILITY_TOLERATE_HOLES) + { + /* This slave can tolerate events omitted from the binlog stream. */ + return NULL; + } + else if (mariadb_slave_capability >= MARIA_SLAVE_CAPABILITY_ANNOTATE) + { + /* + The slave did not request ANNOTATE_ROWS_EVENT (it does not need them as + it will not log them in its own binary log). However, it understands the + event and will just ignore it, and it would break if we omitted it, + leaving a hole in the binlog stream. So just send the event as-is. + */ + } + else + { + /* + The slave does not understand ANNOTATE_ROWS_EVENT. + + Older MariaDB slaves (and MySQL slaves) will break replication if there + are holes in the binlog stream (they will miscompute the binlog offset + and request the wrong position when reconnecting). + + So replace the event with a dummy event of the same size that will be + a no-operation on the slave. + */ + if (Query_log_event::dummy_event(packet, ev_offset, current_checksum_alg)) + { + info->error= ER_MASTER_FATAL_ERROR_READING_BINLOG; + return "Failed to replace row annotate event with dummy: too small event."; + } + } + } + + /* + Replace GTID events with old-style BEGIN events for slaves that do not + understand global transaction IDs. For stand-alone events, where there is + no terminating COMMIT query event, omit the GTID event or replace it with + a dummy event, as appropriate. + */ + if (event_type == GTID_EVENT && + mariadb_slave_capability < MARIA_SLAVE_CAPABILITY_GTID) + { + bool need_dummy= + mariadb_slave_capability < MARIA_SLAVE_CAPABILITY_TOLERATE_HOLES; + bool err= Gtid_log_event::make_compatible_event(packet, &need_dummy, + ev_offset, + current_checksum_alg); + if (err) + { + info->error= ER_MASTER_FATAL_ERROR_READING_BINLOG; + return "Failed to replace GTID event with backwards-compatible event: " + "corrupt event."; + } + if (!need_dummy) + return NULL; + } + + /* + Do not send binlog checkpoint or gtid list events to a slave that does not + understand it. + */ + if ((unlikely(event_type == BINLOG_CHECKPOINT_EVENT) && + mariadb_slave_capability < MARIA_SLAVE_CAPABILITY_BINLOG_CHECKPOINT) || + (unlikely(event_type == GTID_LIST_EVENT) && + mariadb_slave_capability < MARIA_SLAVE_CAPABILITY_GTID)) + { + if (mariadb_slave_capability >= MARIA_SLAVE_CAPABILITY_TOLERATE_HOLES) + { + /* This slave can tolerate events omitted from the binlog stream. */ + return NULL; + } + else + { + /* + The slave does not understand BINLOG_CHECKPOINT_EVENT. Send a dummy + event instead, with same length so slave does not get confused about + binlog positions. + */ + if (Query_log_event::dummy_event(packet, ev_offset, current_checksum_alg)) + { + info->error= ER_MASTER_FATAL_ERROR_READING_BINLOG; + return "Failed to replace binlog checkpoint or gtid list event with " + "dummy: too small event."; + } + } + } + + /* + Skip events with the @@skip_replication flag set, if slave requested + skipping of such events. + */ + if (info->thd->variables.option_bits & OPTION_SKIP_REPLICATION) + { + uint16 event_flags= uint2korr(&((*packet)[FLAGS_OFFSET + ev_offset])); + + if (event_flags & LOG_EVENT_SKIP_REPLICATION_F) + return NULL; + } + + THD_STAGE_INFO(info->thd, stage_sending_binlog_event_to_slave); + + pos= my_b_tell(log); + if (repl_semisync_master.update_sync_header(info->thd, + (uchar*) packet->c_ptr_safe(), + info->log_file_name + info->dirlen, + pos, &need_sync)) + { + info->error= ER_UNKNOWN_ERROR; + return "run 'before_send_event' hook failed"; + } + + if (my_net_write(info->net, (uchar*) packet->ptr(), len)) + { + info->error= ER_UNKNOWN_ERROR; + return "Failed on my_net_write()"; + } + + DBUG_PRINT("info", ("log event code %d", (*packet)[LOG_EVENT_OFFSET+1] )); + if (event_type == LOAD_EVENT) + { + if (send_file(info->thd)) + { + info->error= ER_UNKNOWN_ERROR; + return "failed in send_file()"; + } + } + + if (need_sync && repl_semisync_master.flush_net(info->thd, + packet->c_ptr_safe())) + { + info->error= ER_UNKNOWN_ERROR; + return "Failed to run hook 'after_send_event'"; + } + + return NULL; /* Success */ +} + +static int check_start_offset(binlog_send_info *info, + const char *log_file_name, + my_off_t pos) +{ + IO_CACHE log; + File file= -1; + + /** check that requested position is inside of file */ + if ((file=open_binlog(&log, log_file_name, &info->errmsg)) < 0) + { + info->error= ER_MASTER_FATAL_ERROR_READING_BINLOG; + return 1; + } + + if (pos < BIN_LOG_HEADER_SIZE || pos > my_b_filelength(&log)) + { + const char* msg= "Client requested master to start replication from " + "impossible position"; + + info->errmsg= NULL; // don't do further modifications of error_text + snprintf(info->error_text, sizeof(info->error_text), + "%s; the first event '%s' at %lld, " + "the last event read from '%s' at %d, " + "the last byte read from '%s' at %d.", + msg, + my_basename(info->start_log_file_name), pos, + my_basename(info->start_log_file_name), BIN_LOG_HEADER_SIZE, + my_basename(info->start_log_file_name), BIN_LOG_HEADER_SIZE); + info->error= ER_MASTER_FATAL_ERROR_READING_BINLOG; + goto err; + } + +err: + end_io_cache(&log); + mysql_file_close(file, MYF(MY_WME)); + return info->error; +} + +static int init_binlog_sender(binlog_send_info *info, + LOG_INFO *linfo, + const char *log_ident, + my_off_t *pos) +{ + THD *thd= info->thd; + int error; + char str_buf[128]; + String connect_gtid_state(str_buf, sizeof(str_buf), system_charset_info); + char str_buf2[128]; + String slave_until_gtid_str(str_buf2, sizeof(str_buf2), system_charset_info); + connect_gtid_state.length(0); + + /** save start file/pos that was requested by slave */ + strmake(info->start_log_file_name, log_ident, + sizeof(info->start_log_file_name)); + info->start_pos= *pos; + + /** init last pos */ + info->last_pos= *pos; + + info->current_checksum_alg= get_binlog_checksum_value_at_connect(thd); + info->mariadb_slave_capability= get_mariadb_slave_capability(thd); + info->using_gtid_state= get_slave_connect_state(thd, &connect_gtid_state); + DBUG_EXECUTE_IF("simulate_non_gtid_aware_master", + info->using_gtid_state= false;); + + if (info->using_gtid_state) + { + info->slave_gtid_strict_mode= get_slave_gtid_strict_mode(thd); + info->slave_gtid_ignore_duplicates= get_slave_gtid_ignore_duplicates(thd); + if (get_slave_until_gtid(thd, &slave_until_gtid_str)) + info->until_gtid_state= &info->until_gtid_state_obj; + } + + DBUG_EXECUTE_IF("binlog_force_reconnect_after_22_events", + { + DBUG_SET("-d,binlog_force_reconnect_after_22_events"); + DBUG_SET_INITIAL("-d,binlog_force_reconnect_after_22_events"); + info->dbug_reconnect_counter= 22; + }); + + if (global_system_variables.log_warnings > 1) + { + sql_print_information( + "Start binlog_dump to slave_server(%lu), pos(%s, %lu), " + "using_gtid(%d), gtid('%s')", thd->variables.server_id, + log_ident, (ulong)*pos, info->using_gtid_state, + connect_gtid_state.c_ptr_quick()); + } + +#ifndef DBUG_OFF + if (opt_sporadic_binlog_dump_fail && (binlog_dump_count++ % 2)) + { + info->errmsg= "Master failed COM_BINLOG_DUMP to test if slave can recover"; + info->error= ER_UNKNOWN_ERROR; + return 1; + } +#endif + + if (!mysql_bin_log.is_open()) + { + info->errmsg= "Binary log is not open"; + info->error= ER_MASTER_FATAL_ERROR_READING_BINLOG; + return 1; + } + + char search_file_name[FN_REFLEN]; + const char *name=search_file_name; + if (info->using_gtid_state) + { + if (info->gtid_state.load(connect_gtid_state.c_ptr_quick(), + connect_gtid_state.length())) + { + info->errmsg= "Out of memory or malformed slave request when obtaining " + "start position from GTID state"; + info->error= ER_UNKNOWN_ERROR; + return 1; + } + if (info->until_gtid_state && + info->until_gtid_state->load(slave_until_gtid_str.c_ptr_quick(), + slave_until_gtid_str.length())) + { + info->errmsg= "Out of memory or malformed slave request when " + "obtaining UNTIL position sent from slave"; + info->error= ER_UNKNOWN_ERROR; + return 1; + } + if (unlikely((error= check_slave_start_position(info, &info->errmsg, + &info->error_gtid)))) + { + info->error= error; + return 1; + } + if ((info->errmsg= gtid_find_binlog_file(&info->gtid_state, + search_file_name, + info->until_gtid_state))) + { + info->error= ER_MASTER_FATAL_ERROR_READING_BINLOG; + return 1; + } + + /* start from beginning of binlog file */ + *pos = 4; + } + else + { + if (log_ident[0]) + mysql_bin_log.make_log_name(search_file_name, log_ident); + else + name=0; // Find first log + } + linfo->index_file_offset= 0; + + if (mysql_bin_log.find_log_pos(linfo, name, 1)) + { + info->errmsg= "Could not find first log file name in binary " + "log index file"; + info->error= ER_MASTER_FATAL_ERROR_READING_BINLOG; + return 1; + } + + // set current pos too + linfo->pos= *pos; + // note: publish that we use file, before we open it + thd->set_current_linfo(linfo); + + if (check_start_offset(info, linfo->log_file_name, *pos)) + return 1; + + if (*pos > BIN_LOG_HEADER_SIZE) + { + /* + mark that first format descriptor with "log_pos=0", so the slave + should not increment master's binlog position + (rli->group_master_log_pos) + */ + info->clear_initial_log_pos= true; + } + + return 0; +} + +/** + * send format descriptor event for one binlog file + */ +static int send_format_descriptor_event(binlog_send_info *info, IO_CACHE *log, + LOG_INFO *linfo, my_off_t start_pos) +{ + int error; + ulong ev_offset; + THD *thd= info->thd; + String *packet= info->packet; + Log_event_type event_type; + bool initial_log_pos= info->clear_initial_log_pos; + DBUG_ENTER("send_format_descriptor_event"); + + /** + * 1) reset fdev before each log-file + * 2) read first event, should be the format descriptor + * 3) read second event, *might* be start encryption event + * if it's isn't, seek back to undo this read + */ + if (info->fdev != NULL) + delete info->fdev; + + if (!(info->fdev= new Format_description_log_event(3))) + { + info->errmsg= "Out of memory initializing format_description event"; + info->error= ER_MASTER_FATAL_ERROR_READING_BINLOG; + DBUG_RETURN(1); + } + + /* reset transmit packet for the event read from binary log file */ + if (reset_transmit_packet(info, info->flags, &ev_offset, &info->errmsg)) + DBUG_RETURN(1); + + /* + Try to find a Format_description_log_event at the beginning of + the binlog + */ + info->last_pos= my_b_tell(log); + error= Log_event::read_log_event(log, packet, info->fdev, + opt_master_verify_checksum + ? info->current_checksum_alg + : BINLOG_CHECKSUM_ALG_OFF); + linfo->pos= my_b_tell(log); + + if (unlikely(error)) + { + set_read_error(info, error); + DBUG_RETURN(1); + } + + event_type= (Log_event_type)((uchar)(*packet)[LOG_EVENT_OFFSET+ev_offset]); + + /* + The packet has offsets equal to the normal offsets in a + binlog event + ev_offset (the first ev_offset characters are + the header (default \0)). + */ + DBUG_PRINT("info", + ("Looked for a Format_description_log_event, " + "found event type %d", (int)event_type)); + + if (event_type != FORMAT_DESCRIPTION_EVENT) + { + info->error= ER_MASTER_FATAL_ERROR_READING_BINLOG; + info->errmsg= "Failed to find format descriptor event in start of binlog"; + sql_print_warning("Failed to find format descriptor event in " + "start of binlog: %s", + info->log_file_name); + DBUG_RETURN(1); + } + + info->current_checksum_alg= get_checksum_alg(packet->ptr() + ev_offset, + packet->length() - ev_offset); + + DBUG_ASSERT(info->current_checksum_alg == BINLOG_CHECKSUM_ALG_OFF || + info->current_checksum_alg == BINLOG_CHECKSUM_ALG_UNDEF || + info->current_checksum_alg == BINLOG_CHECKSUM_ALG_CRC32); + + if (!is_slave_checksum_aware(thd) && + info->current_checksum_alg != BINLOG_CHECKSUM_ALG_OFF && + info->current_checksum_alg != BINLOG_CHECKSUM_ALG_UNDEF) + { + info->error= ER_MASTER_FATAL_ERROR_READING_BINLOG; + info->errmsg= "Slave can not handle replication events with the " + "checksum that master is configured to log"; + sql_print_warning("Master is configured to log replication events " + "with checksum, but will not send such events to " + "slaves that cannot process them"); + DBUG_RETURN(1); + } + + uint ev_len= packet->length() - ev_offset; + if (info->current_checksum_alg != BINLOG_CHECKSUM_ALG_UNDEF) + ev_len-= BINLOG_CHECKSUM_LEN; + + Format_description_log_event *tmp; + if (!(tmp= new Format_description_log_event(packet->ptr() + ev_offset, + ev_len, info->fdev))) + { + info->error= ER_MASTER_FATAL_ERROR_READING_BINLOG; + info->errmsg= "Corrupt Format_description event found " + "or out-of-memory"; + DBUG_RETURN(1); + } + delete info->fdev; + info->fdev= tmp; + + (*packet)[FLAGS_OFFSET+ev_offset] &= ~LOG_EVENT_BINLOG_IN_USE_F; + + if (initial_log_pos) + { + info->clear_initial_log_pos= false; + /* + mark that this event with "log_pos=0", so the slave + should not increment master's binlog position + (rli->group_master_log_pos) + */ + int4store((char*) packet->ptr()+LOG_POS_OFFSET+ev_offset, (ulong) 0); + + /* + if reconnect master sends FD event with `created' as 0 + to avoid destroying temp tables. + */ + int4store((char*) packet->ptr()+LOG_EVENT_MINIMAL_HEADER_LEN+ + ST_CREATED_OFFSET+ev_offset, (ulong) 0); + + /* fix the checksum due to latest changes in header */ + fix_checksum(info->current_checksum_alg, packet, ev_offset); + } + else if (info->using_gtid_state) + { + /* + If this event has the field `created' set, then it will cause the + slave to delete all active temporary tables. This must not happen + if the slave received any later GTIDs in a previous connect, as + those GTIDs might have created new temporary tables that are still + needed. + + So here, we check if the starting GTID position was already + reached before this format description event. If not, we clear the + `created' flag to preserve temporary tables on the slave. (If the + slave connects at a position past this event, it means that it + already received and handled it in a previous connect). + */ + if (!info->gtid_state.is_pos_reached()) + { + int4store((char*) packet->ptr()+LOG_EVENT_MINIMAL_HEADER_LEN+ + ST_CREATED_OFFSET+ev_offset, (ulong) 0); + fix_checksum(info->current_checksum_alg, packet, ev_offset); + } + } + + /* send it */ + if (my_net_write(info->net, (uchar*) packet->ptr(), packet->length())) + { + info->errmsg= "Failed on my_net_write()"; + info->error= ER_UNKNOWN_ERROR; + DBUG_RETURN(1); + } + + /* + Read the following Start_encryption_log_event and send it to slave as + Ignorable_log_event. Although Slave doesn't need to know whether master's + binlog is encrypted but it needs to update slave log pos (for mysqlbinlog). + + If slave want to encrypt its logs, it should generate its own + random nonce, it should not use the one from the master. + */ + /* reset transmit packet for the event read from binary log file */ + if (reset_transmit_packet(info, info->flags, &ev_offset, &info->errmsg)) + DBUG_RETURN(1); + info->last_pos= linfo->pos; + error= Log_event::read_log_event(log, packet, info->fdev, + opt_master_verify_checksum + ? info->current_checksum_alg + : BINLOG_CHECKSUM_ALG_OFF); + linfo->pos= my_b_tell(log); + + if (unlikely(error)) + { + set_read_error(info, error); + DBUG_RETURN(1); + } + + event_type= (Log_event_type)((uchar)(*packet)[LOG_EVENT_OFFSET + ev_offset]); + if (event_type == START_ENCRYPTION_EVENT) + { + Start_encryption_log_event *sele= (Start_encryption_log_event *) + Log_event::read_log_event(packet->ptr() + ev_offset, packet->length() + - ev_offset, &info->errmsg, info->fdev, + BINLOG_CHECKSUM_ALG_OFF); + if (!sele) + { + info->error= ER_MASTER_FATAL_ERROR_READING_BINLOG; + DBUG_RETURN(1); + } + + if (info->fdev->start_decryption(sele)) + { + info->error= ER_MASTER_FATAL_ERROR_READING_BINLOG; + info->errmsg= "Could not decrypt binlog: encryption key error"; + delete sele; + DBUG_RETURN(1); + } + /* Make it Ignorable_log_event and send it */ + (*packet)[FLAGS_OFFSET+ev_offset] |= LOG_EVENT_IGNORABLE_F; + if (initial_log_pos) + int4store((char*) packet->ptr()+LOG_POS_OFFSET+ev_offset, (ulong) 0); + /* fix the checksum due to latest changes in header */ + fix_checksum(info->current_checksum_alg, packet, ev_offset); + if (my_net_write(info->net, (uchar*) packet->ptr(), packet->length())) + { + info->errmsg= "Failed on my_net_write()"; + info->error= ER_UNKNOWN_ERROR; + DBUG_RETURN(1); + } + delete sele; + } + else if (start_pos == BIN_LOG_HEADER_SIZE) + { + /* + not Start_encryption_log_event - seek back. But only if + send_one_binlog_file() isn't going to seek anyway + */ + my_b_seek(log, info->last_pos); + linfo->pos= info->last_pos; + } + + + /** all done */ + DBUG_RETURN(0); +} + +static bool should_stop(binlog_send_info *info, bool kill_server_check= false) +{ + return + info->net->error || + info->net->vio == NULL || + (info->thd->killed && + (info->thd->killed != KILL_SERVER || kill_server_check)) || + info->error != 0 || + info->should_stop; +} + +/** + * wait for new events to enter binlog + * this function will send heartbeats while waiting if so configured + */ +static int wait_new_events(binlog_send_info *info, /* in */ + LOG_INFO* linfo, /* in */ + char binlog_end_pos_filename[], /* out */ + my_off_t *end_pos_ptr) /* out */ +{ + int ret= 1; + PSI_stage_info old_stage; + + mysql_bin_log.lock_binlog_end_pos(); + info->thd->ENTER_COND(mysql_bin_log.get_bin_log_cond(), + mysql_bin_log.get_binlog_end_pos_lock(), + &stage_master_has_sent_all_binlog_to_slave, + &old_stage); + + while (!should_stop(info, true)) + { + *end_pos_ptr= mysql_bin_log.get_binlog_end_pos(binlog_end_pos_filename); + if (strcmp(linfo->log_file_name, binlog_end_pos_filename) != 0) + { + /* there has been a log file switch, we don't need to wait */ + ret= 0; + break; + } + + if (linfo->pos < *end_pos_ptr) + { + /* there is data to read, we don't need to wait */ + ret= 0; + break; + } + + if (info->heartbeat_period) + { + struct timespec ts; + set_timespec_nsec(ts, info->heartbeat_period); + ret= mysql_bin_log.wait_for_update_binlog_end_pos(info->thd, &ts); + if (ret == ETIMEDOUT || ret == ETIME) + { + struct event_coordinates coord = { linfo->log_file_name, linfo->pos }; +#ifndef DBUG_OFF + const ulong hb_info_counter_limit = 3; + if (info->hb_info_counter < hb_info_counter_limit) + { + sql_print_information("master sends heartbeat message %s:%llu", + linfo->log_file_name, linfo->pos); + info->hb_info_counter++; + if (info->hb_info_counter == hb_info_counter_limit) + sql_print_information("the rest of heartbeat info skipped ..."); + } +#endif + mysql_bin_log.unlock_binlog_end_pos(); + ret= send_heartbeat_event(info, + info->net, info->packet, &coord, + info->current_checksum_alg); + mysql_bin_log.lock_binlog_end_pos(); + + if (ret) + { + ret= 1; // error + break; + } + /** + * re-read heartbeat period after each sent + */ + info->heartbeat_period= get_heartbeat_period(info->thd); + } + else if (ret != 0) + { + ret= 1; // error + break; + } + } + else + { + ret= mysql_bin_log.wait_for_update_binlog_end_pos(info->thd, NULL); + if (ret != 0 && ret != ETIMEDOUT && ret != ETIME) + { + ret= 1; // error + break; + } + } + } + + /* it releases the lock set in ENTER_COND */ + info->thd->EXIT_COND(&old_stage); + return ret; +} + +/** + * get end pos of current log file, this function + * will wait if there is nothing available + */ +static my_off_t get_binlog_end_pos(binlog_send_info *info, + IO_CACHE* log, + LOG_INFO* linfo) +{ + my_off_t log_pos= my_b_tell(log); + + /** + * get current binlog end pos + */ + mysql_bin_log.lock_binlog_end_pos(); + char binlog_end_pos_filename[FN_REFLEN]; + my_off_t end_pos= mysql_bin_log.get_binlog_end_pos(binlog_end_pos_filename); + mysql_bin_log.unlock_binlog_end_pos(); + + do + { + if (strcmp(binlog_end_pos_filename, linfo->log_file_name) != 0) + { + /** + * this file is not active, since it's not written to again, + * it safe to check file length and use that as end_pos + */ + end_pos= my_b_filelength(log); + + if (log_pos == end_pos) + return 0; // already at end of file inactive file + else + return end_pos; // return size of inactive file + } + else + { + /** + * this is the active file + */ + + if (log_pos < end_pos) + { + /** + * there is data available to read + */ + return end_pos; + } + + /** + * check if we should wait for more data + */ + if ((info->flags & BINLOG_DUMP_NON_BLOCK) || + (info->thd->variables.server_id == 0)) + { + info->should_stop= true; + return 0; + } + + /** + * flush data before waiting + */ + if (net_flush(info->net)) + { + info->errmsg= "failed on net_flush()"; + info->error= ER_UNKNOWN_ERROR; + return 1; + } + + if (wait_new_events(info, linfo, binlog_end_pos_filename, &end_pos)) + return 1; + } + } while (!should_stop(info)); + + return 0; +} + +/** + * This function sends events from one binlog file + * but only up until end_pos + * + * return 0 - OK + * else NOK + */ +static int send_events(binlog_send_info *info, IO_CACHE* log, LOG_INFO* linfo, + my_off_t end_pos) +{ + int error; + ulong ev_offset; + + String *packet= info->packet; + linfo->pos= my_b_tell(log); + info->last_pos= my_b_tell(log); + + log->end_of_file= end_pos; + while (linfo->pos < end_pos) + { + if (should_stop(info)) + return 0; + + /* reset the transmit packet for the event read from binary log + file */ + if (reset_transmit_packet(info, info->flags, &ev_offset, &info->errmsg)) + return 1; + + info->last_pos= linfo->pos; + error= Log_event::read_log_event(log, packet, info->fdev, + opt_master_verify_checksum ? info->current_checksum_alg + : BINLOG_CHECKSUM_ALG_OFF); + linfo->pos= my_b_tell(log); + + if (unlikely(error)) + { + set_read_error(info, error); + return 1; + } + + Log_event_type event_type= + (Log_event_type)((uchar)(*packet)[LOG_EVENT_OFFSET+ev_offset]); + +#ifndef DBUG_OFF + if (info->dbug_reconnect_counter > 0) + { + --info->dbug_reconnect_counter; + if (info->dbug_reconnect_counter == 0) + { + info->errmsg= "DBUG-injected forced reconnect"; + info->error= ER_UNKNOWN_ERROR; + return 1; + } + } +#endif + +#ifdef ENABLED_DEBUG_SYNC + DBUG_EXECUTE_IF("dump_thread_wait_before_send_xid", + { + if (event_type == XID_EVENT) + { + net_flush(info->net); + const char act[]= + "now " + "wait_for signal.continue"; + DBUG_ASSERT(debug_sync_service); + DBUG_ASSERT(!debug_sync_set_action( + info->thd, + STRING_WITH_LEN(act))); + + const char act2[]= + "now " + "signal signal.continued"; + DBUG_ASSERT(!debug_sync_set_action( + info->thd, + STRING_WITH_LEN(act2))); + } + }); +#endif + + if (event_type != START_ENCRYPTION_EVENT && + ((info->errmsg= send_event_to_slave(info, event_type, log, + ev_offset, &info->error_gtid)))) + return 1; + + if (unlikely(info->send_fake_gtid_list) && + info->gtid_skip_group == GTID_SKIP_NOT) + { + Gtid_list_log_event glev(&info->until_binlog_state, 0); + + if (reset_transmit_packet(info, info->flags, &ev_offset, &info->errmsg) || + fake_gtid_list_event(info, &glev, &info->errmsg, (uint32)my_b_tell(log))) + { + info->error= ER_UNKNOWN_ERROR; + return 1; + } + info->send_fake_gtid_list= false; + } + + if (info->until_gtid_state && + is_until_reached(info, &ev_offset, event_type, &info->errmsg, + (uint32)my_b_tell(log))) + { + if (info->errmsg) + { + info->error= ER_UNKNOWN_ERROR; + return 1; + } + info->should_stop= true; + return 0; + } + + /* Abort server before it sends the XID_EVENT */ + DBUG_EXECUTE_IF("crash_before_send_xid", + { + if (event_type == XID_EVENT) + { + my_sleep(2000000); + DBUG_SUICIDE(); + } + }); + } + + return 0; +} + +/** + * This function sends one binlog file to slave + * + * return 0 - OK + * 1 - NOK + */ +static int send_one_binlog_file(binlog_send_info *info, + IO_CACHE* log, + LOG_INFO* linfo, + my_off_t start_pos) +{ + mysql_mutex_assert_not_owner(mysql_bin_log.get_log_lock()); + + /* seek to the requested position, to start the requested dump */ + if (start_pos != BIN_LOG_HEADER_SIZE) + { + my_b_seek(log, start_pos); + linfo->pos= start_pos; + } + + while (!should_stop(info)) + { + /** + * get end pos of current log file, this function + * will wait if there is nothing available + */ + my_off_t end_pos= get_binlog_end_pos(info, log, linfo); + if (end_pos <= 1) + { + /** end of file or error */ + return (int)end_pos; + } + info->dirlen= dirname_length(info->log_file_name); + /** + * send events from current position up to end_pos + */ + if (send_events(info, log, linfo, end_pos)) + return 1; + } + + return 1; +} + +void mysql_binlog_send(THD* thd, char* log_ident, my_off_t pos, + ushort flags) +{ + LOG_INFO linfo; + + IO_CACHE log; + File file = -1; + String* const packet= &thd->packet; + + binlog_send_info infoobj(thd, packet, flags, linfo.log_file_name); + binlog_send_info *info= &infoobj; + bool has_transmit_started= false; + + int old_max_allowed_packet= thd->variables.max_allowed_packet; + thd->variables.max_allowed_packet= MAX_MAX_ALLOWED_PACKET; + + DBUG_ENTER("mysql_binlog_send"); + DBUG_PRINT("enter",("log_ident: '%s' pos: %ld", log_ident, (long) pos)); + + bzero((char*) &log,sizeof(log)); + + if (init_binlog_sender(info, &linfo, log_ident, &pos)) + goto err; + + has_transmit_started= true; + + /* Check if the dump thread is created by a slave with semisync enabled. */ + thd->semi_sync_slave = is_semi_sync_slave(); + + DBUG_ASSERT(pos == linfo.pos); + + if (repl_semisync_master.dump_start(thd, linfo.log_file_name, linfo.pos)) + { + info->errmsg= "Failed to run hook 'transmit_start'"; + info->error= ER_UNKNOWN_ERROR; + goto err; + } + DBUG_EXECUTE_IF("simulate_delay_at_shutdown", + { + const char act[]= + "now " + "WAIT_FOR greetings_from_kill_mysql"; + DBUG_ASSERT(!debug_sync_set_action(thd, + STRING_WITH_LEN(act))); + };); + + /* + heartbeat_period from @master_heartbeat_period user variable + NOTE: this is initialized after transmit_start-hook so that + the hook can affect value of heartbeat period + */ + info->heartbeat_period= get_heartbeat_period(thd); + + while (!should_stop(info)) + { + /* + Tell the client about the log name with a fake Rotate event; + this is needed even if we also send a Format_description_log_event + just after, because that event does not contain the binlog's name. + Note that as this Rotate event is sent before + Format_description_log_event, the slave cannot have any info to + understand this event's format, so the header len of + Rotate_log_event is FROZEN (so in 5.0 it will have a header shorter + than other events except FORMAT_DESCRIPTION_EVENT). + Before 4.0.14 we called fake_rotate_event below only if (pos == + BIN_LOG_HEADER_SIZE), because if this is false then the slave + already knows the binlog's name. + Since, we always call fake_rotate_event; if the slave already knew + the log's name (ex: CHANGE MASTER TO MASTER_LOG_FILE=...) this is + useless but does not harm much. It is nice for 3.23 (>=.58) slaves + which test Rotate events to see if the master is 4.0 (then they + choose to stop because they can't replicate 4.0); by always calling + fake_rotate_event we are sure that 3.23.58 and newer will detect the + problem as soon as replication starts (BUG#198). + Always calling fake_rotate_event makes sending of normal + (=from-binlog) Rotate events a priori unneeded, but it is not so + simple: the 2 Rotate events are not equivalent, the normal one is + before the Stop event, the fake one is after. If we don't send the + normal one, then the Stop event will be interpreted (by existing 4.0 + slaves) as "the master stopped", which is wrong. So for safety, + given that we want minimum modification of 4.0, we send the normal + and fake Rotates. + */ + if (fake_rotate_event(info, pos, &info->errmsg, info->current_checksum_alg)) + { + /* + This error code is not perfect, as fake_rotate_event() does not + read anything from the binlog; if it fails it's because of an + error in my_net_write(), fortunately it will say so in errmsg. + */ + info->error= ER_MASTER_FATAL_ERROR_READING_BINLOG; + goto err; + } + + if ((file=open_binlog(&log, linfo.log_file_name, &info->errmsg)) < 0) + { + info->error= ER_MASTER_FATAL_ERROR_READING_BINLOG; + goto err; + } + + if (send_format_descriptor_event(info, &log, &linfo, pos)) + { + info->error= ER_MASTER_FATAL_ERROR_READING_BINLOG; + goto err; + } + + /* + We want to corrupt the first event that will be sent to the slave. + But we do not want the corruption to happen early, eg. when client does + BINLOG_GTID_POS(). So test case sets a DBUG trigger which causes us to + set the real DBUG injection here. + */ + DBUG_EXECUTE_IF("corrupt_read_log_event2_set", + { + DBUG_SET("-d,corrupt_read_log_event2_set"); + DBUG_SET("+d,corrupt_read_log_event2"); + }); + + /* + Handle the case of START SLAVE UNTIL with an UNTIL condition already + fulfilled at the start position. + + We will send one event, the format_description, and then stop. + */ + if (info->until_gtid_state && info->until_gtid_state->count() == 0) + info->gtid_until_group= GTID_UNTIL_STOP_AFTER_STANDALONE; + + THD_STAGE_INFO(thd, stage_sending_binlog_event_to_slave); + if (send_one_binlog_file(info, &log, &linfo, pos)) + break; + + if (should_stop(info)) + break; + + DBUG_EXECUTE_IF("wait_after_binlog_EOF", + { + const char act[]= "now wait_for signal.rotate_finished"; + DBUG_ASSERT(!debug_sync_set_action(current_thd, + STRING_WITH_LEN(act))); + };); + + THD_STAGE_INFO(thd, + stage_finished_reading_one_binlog_switching_to_next_binlog); + if (mysql_bin_log.find_next_log(&linfo, 1)) + { + info->errmsg= "could not find next log"; + info->error= ER_MASTER_FATAL_ERROR_READING_BINLOG; + break; + } + + /** start from start of next file */ + pos= BIN_LOG_HEADER_SIZE; + + /** close current cache/file */ + end_io_cache(&log); + mysql_file_close(file, MYF(MY_WME)); + file= -1; + } + +err: + THD_STAGE_INFO(thd, stage_waiting_to_finalize_termination); + if (has_transmit_started) + { + repl_semisync_master.dump_end(thd); + } + + if (info->thd->killed == KILL_SLAVE_SAME_ID) + { + info->errmsg= "A slave with the same server_uuid/server_id as this slave " + "has connected to the master"; + info->error= ER_SLAVE_SAME_ID; + } + + const bool binlog_open = my_b_inited(&log); + if (file >= 0) + { + end_io_cache(&log); + mysql_file_close(file, MYF(MY_WME)); + } + + thd->reset_current_linfo(); + thd->variables.max_allowed_packet= old_max_allowed_packet; + delete info->fdev; + + if (likely(info->error == 0)) + { + my_eof(thd); + DBUG_VOID_RETURN; + } + + if ((info->error == ER_MASTER_FATAL_ERROR_READING_BINLOG || + info->error == ER_SLAVE_SAME_ID) && binlog_open) + { + /* + detailing the fatal error message with coordinates + of the last position read. + */ + my_snprintf(info->error_text, sizeof(info->error_text), + "%s; the first event '%s' at %lld, " + "the last event read from '%s' at %lld, " + "the last byte read from '%s' at %lld.", + info->errmsg, + my_basename(info->start_log_file_name), info->start_pos, + my_basename(info->log_file_name), info->last_pos, + my_basename(info->log_file_name), linfo.pos); + } + else if (info->error == ER_GTID_POSITION_NOT_FOUND_IN_BINLOG) + { + my_snprintf(info->error_text, sizeof(info->error_text), + "Error: connecting slave requested to start from GTID " + "%u-%u-%llu, which is not in the master's binlog", + info->error_gtid.domain_id, + info->error_gtid.server_id, + info->error_gtid.seq_no); + /* Use this error code so slave will know not to try reconnect. */ + info->error= ER_MASTER_FATAL_ERROR_READING_BINLOG; + } + else if (info->error == ER_GTID_POSITION_NOT_FOUND_IN_BINLOG2) + { + my_snprintf(info->error_text, sizeof(info->error_text), + "Error: connecting slave requested to start from GTID " + "%u-%u-%llu, which is not in the master's binlog. Since the " + "master's binlog contains GTIDs with higher sequence numbers, " + "it probably means that the slave has diverged due to " + "executing extra erroneous transactions", + info->error_gtid.domain_id, + info->error_gtid.server_id, + info->error_gtid.seq_no); + /* Use this error code so slave will know not to try reconnect. */ + info->error= ER_MASTER_FATAL_ERROR_READING_BINLOG; + } + else if (info->error == ER_GTID_START_FROM_BINLOG_HOLE) + { + my_snprintf(info->error_text, sizeof(info->error_text), + "The binlog on the master is missing the GTID %u-%u-%llu " + "requested by the slave (even though both a prior and a " + "subsequent sequence number does exist), and GTID strict mode " + "is enabled", + info->error_gtid.domain_id, + info->error_gtid.server_id, + info->error_gtid.seq_no); + /* Use this error code so slave will know not to try reconnect. */ + info->error= ER_MASTER_FATAL_ERROR_READING_BINLOG; + } + else if (info->error == ER_CANNOT_LOAD_SLAVE_GTID_STATE) + { + my_snprintf(info->error_text, sizeof(info->error_text), + "Failed to load replication slave GTID state from table %s.%s", + "mysql", rpl_gtid_slave_state_table_name.str); + info->error= ER_MASTER_FATAL_ERROR_READING_BINLOG; + } + else if (info->errmsg != NULL) + strcpy(info->error_text, info->errmsg); + + my_message(info->error, info->error_text, MYF(0)); + + DBUG_VOID_RETURN; +} + + +/** + Execute a START SLAVE statement. + + @param thd Pointer to THD object for the client thread executing the + statement. + + @param mi Pointer to Master_info object for the slave's IO thread. + + @param net_report If true, saves the exit status into thd->stmt_da. + + @retval 0 success + @retval 1 error + @retval -1 fatal error +*/ + +int start_slave(THD* thd , Master_info* mi, bool net_report) +{ + int slave_errno= 0; + int thread_mask; + char master_info_file_tmp[FN_REFLEN]; + char relay_log_info_file_tmp[FN_REFLEN]; + DBUG_ENTER("start_slave"); + + if (check_global_access(thd, PRIV_STMT_START_SLAVE)) + DBUG_RETURN(-1); + + create_logfile_name_with_suffix(master_info_file_tmp, + sizeof(master_info_file_tmp), + master_info_file, 0, + &mi->cmp_connection_name); + create_logfile_name_with_suffix(relay_log_info_file_tmp, + sizeof(relay_log_info_file_tmp), + relay_log_info_file, 0, + &mi->cmp_connection_name); + + mi->lock_slave_threads(); + if (mi->killed) + { + /* connection was deleted while we waited for lock_slave_threads */ + mi->unlock_slave_threads(); + my_error(WARN_NO_MASTER_INFO, MYF(0), (int) mi->connection_name.length, + mi->connection_name.str); + DBUG_RETURN(-1); + } + + // Get a mask of _stopped_ threads + init_thread_mask(&thread_mask,mi,1 /* inverse */); + + if (thd->lex->mi.gtid_pos_str.str) + { + if (thread_mask != (SLAVE_IO|SLAVE_SQL)) + { + slave_errno= ER_SLAVE_WAS_RUNNING; + goto err; + } + if (thd->lex->slave_thd_opt) + { + slave_errno= ER_BAD_SLAVE_UNTIL_COND; + goto err; + } + if (mi->using_gtid == Master_info::USE_GTID_NO) + { + slave_errno= ER_UNTIL_REQUIRES_USING_GTID; + goto err; + } + } + + /* + Below we will start all stopped threads. But if the user wants to + start only one thread, do as if the other thread was running (as we + don't wan't to touch the other thread), so set the bit to 0 for the + other thread + */ + if (thd->lex->slave_thd_opt) + thread_mask&= thd->lex->slave_thd_opt; + if (thread_mask) //some threads are stopped, start them + { + if (init_master_info(mi,master_info_file_tmp,relay_log_info_file_tmp, 0, + thread_mask)) + slave_errno=ER_MASTER_INFO; + else if (!*mi->host) + { + slave_errno= ER_BAD_SLAVE; net_report= 0; + my_message(slave_errno, "Misconfigured slave: MASTER_HOST was not set; Fix in config file or with CHANGE MASTER TO", + MYF(0)); + } + else + { + /* + If we will start SQL thread we will care about UNTIL options If + not and they are specified we will ignore them and warn user + about this fact. + */ + if (thread_mask & SLAVE_SQL) + { + mysql_mutex_lock(&mi->rli.data_lock); + + if (thd->lex->mi.pos) + { + if (thd->lex->mi.relay_log_pos) + slave_errno=ER_BAD_SLAVE_UNTIL_COND; + mi->rli.until_condition= Relay_log_info::UNTIL_MASTER_POS; + mi->rli.until_log_pos= thd->lex->mi.pos; + /* + We don't check thd->lex->mi.log_file_name for NULL here + since it is checked in sql_yacc.yy + */ + strmake_buf(mi->rli.until_log_name, thd->lex->mi.log_file_name); + } + else if (thd->lex->mi.relay_log_pos) + { + mi->rli.until_condition= Relay_log_info::UNTIL_RELAY_POS; + mi->rli.until_log_pos= thd->lex->mi.relay_log_pos; + strmake_buf(mi->rli.until_log_name, thd->lex->mi.relay_log_name); + } + else if (thd->lex->mi.gtid_pos_str.str) + { + if (mi->rli.until_gtid_pos.load(thd->lex->mi.gtid_pos_str.str, + thd->lex->mi.gtid_pos_str.length)) + { + slave_errno= ER_INCORRECT_GTID_STATE; + mysql_mutex_unlock(&mi->rli.data_lock); + goto err; + } + mi->rli.until_condition= Relay_log_info::UNTIL_GTID; + } + else + mi->rli.clear_until_condition(); + + if (mi->rli.until_condition == Relay_log_info::UNTIL_MASTER_POS || + mi->rli.until_condition == Relay_log_info::UNTIL_RELAY_POS) + { + /* Preparing members for effective until condition checking */ + const char *p= fn_ext(mi->rli.until_log_name); + char *p_end; + if (*p) + { + //p points to '.' + mi->rli.until_log_name_extension= strtoul(++p,&p_end, 10); + /* + p_end points to the first invalid character. If it equals + to p, no digits were found, error. If it contains '\0' it + means conversion went ok. + */ + if (p_end==p || *p_end) + slave_errno=ER_BAD_SLAVE_UNTIL_COND; + } + else + slave_errno=ER_BAD_SLAVE_UNTIL_COND; + + /* mark the cached result of the UNTIL comparison as "undefined" */ + mi->rli.until_log_names_cmp_result= + Relay_log_info::UNTIL_LOG_NAMES_CMP_UNKNOWN; + } + + if (mi->rli.until_condition != Relay_log_info::UNTIL_NONE) + { + /* Issuing warning then started without --skip-slave-start */ + if (!opt_skip_slave_start) + push_warning(thd, Sql_condition::WARN_LEVEL_NOTE, + ER_MISSING_SKIP_SLAVE, + ER_THD(thd, ER_MISSING_SKIP_SLAVE)); + } + + mysql_mutex_unlock(&mi->rli.data_lock); + } + else if (thd->lex->mi.pos || thd->lex->mi.relay_log_pos) + push_warning(thd, + Sql_condition::WARN_LEVEL_NOTE, ER_UNTIL_COND_IGNORED, + ER_THD(thd, ER_UNTIL_COND_IGNORED)); + + if (!slave_errno) + slave_errno = start_slave_threads(thd, + 1, + 1 /* wait for start */, + mi, + master_info_file_tmp, + relay_log_info_file_tmp, + thread_mask); + } + } + else + { + /* no error if all threads are already started, only a warning */ + push_warning(thd, Sql_condition::WARN_LEVEL_NOTE, ER_SLAVE_WAS_RUNNING, + ER_THD(thd, ER_SLAVE_WAS_RUNNING)); + } + +err: + mi->unlock_slave_threads(); + thd_proc_info(thd, 0); + + if (slave_errno) + { + if (net_report) + my_error(slave_errno, MYF(0), + (int) mi->connection_name.length, + mi->connection_name.str); + DBUG_RETURN(slave_errno == ER_BAD_SLAVE ? -1 : 1); + } + + DBUG_RETURN(0); +} + + +/** + Execute a STOP SLAVE statement. + + @param thd Pointer to THD object for the client thread executing the + statement. + + @param mi Pointer to Master_info object for the slave's IO thread. + + @param net_report If true, saves the exit status into thd->stmt_da. + + @retval 0 success + @retval 1 error + @retval -1 error +*/ + +int stop_slave(THD* thd, Master_info* mi, bool net_report ) +{ + int slave_errno; + DBUG_ENTER("stop_slave"); + DBUG_PRINT("enter",("Connection: %s", mi->connection_name.str)); + + if (check_global_access(thd, PRIV_STMT_STOP_SLAVE)) + DBUG_RETURN(-1); + THD_STAGE_INFO(thd, stage_killing_slave); + int thread_mask; + mi->lock_slave_threads(); + /* + Get a mask of _running_ threads. + We don't have to test for mi->killed as the thread_mask will take care + of checking if threads exists + */ + init_thread_mask(&thread_mask,mi,0 /* not inverse*/); + /* + Below we will stop all running threads. + But if the user wants to stop only one thread, do as if the other thread + was stopped (as we don't wan't to touch the other thread), so set the + bit to 0 for the other thread + */ + if (thd->lex->slave_thd_opt) + thread_mask &= thd->lex->slave_thd_opt; + + if (thread_mask) + { + slave_errno= terminate_slave_threads(mi,thread_mask, 0 /* get lock */); + } + else + { + //no error if both threads are already stopped, only a warning + slave_errno= 0; + push_warning(thd, Sql_condition::WARN_LEVEL_NOTE, ER_SLAVE_WAS_NOT_RUNNING, + ER_THD(thd, ER_SLAVE_WAS_NOT_RUNNING)); + } + + mi->unlock_slave_threads(); + + if (slave_errno) + { + if (net_report) + my_message(slave_errno, ER_THD(thd, slave_errno), MYF(0)); + DBUG_RETURN(1); + } + + DBUG_RETURN(0); +} + + +/** + Execute a RESET SLAVE statement. + + @param thd Pointer to THD object of the client thread executing the + statement. + + @param mi Pointer to Master_info object for the slave. + + @retval 0 success + @retval 1 error +*/ +int reset_slave(THD *thd, Master_info* mi) +{ + MY_STAT stat_area; + char fname[FN_REFLEN]; + int thread_mask= 0, error= 0; + uint sql_errno=ER_UNKNOWN_ERROR; + const char* errmsg= "Unknown error occurred while resetting slave"; + char master_info_file_tmp[FN_REFLEN]; + char relay_log_info_file_tmp[FN_REFLEN]; + DBUG_ENTER("reset_slave"); + + mi->lock_slave_threads(); + if (mi->killed) + { + /* connection was deleted while we waited for lock_slave_threads */ + mi->unlock_slave_threads(); + my_error(WARN_NO_MASTER_INFO, MYF(0), (int) mi->connection_name.length, + mi->connection_name.str); + DBUG_RETURN(-1); + } + + init_thread_mask(&thread_mask,mi,0 /* not inverse */); + if (thread_mask) // We refuse if any slave thread is running + { + mi->unlock_slave_threads(); + my_error(ER_SLAVE_MUST_STOP, MYF(0), (int) mi->connection_name.length, + mi->connection_name.str); + DBUG_RETURN(ER_SLAVE_MUST_STOP); + } + + // delete relay logs, clear relay log coordinates + if (unlikely((error= purge_relay_logs(&mi->rli, thd, + 1 /* just reset */, + &errmsg)))) + { + sql_errno= ER_RELAY_LOG_FAIL; + goto err; + } + + /* Clear master's log coordinates and associated information */ + mi->clear_in_memory_info(thd->lex->reset_slave_info.all); + + /* + Reset errors (the idea is that we forget about the + old master). + */ + mi->clear_error(); + mi->rli.clear_error(); + mi->rli.clear_until_condition(); + mi->rli.clear_sql_delay(); + mi->rli.slave_skip_counter= 0; + + // close master_info_file, relay_log_info_file, set mi->inited=rli->inited=0 + end_master_info(mi); + + end_relay_log_info(&mi->rli); + // and delete these two files + create_logfile_name_with_suffix(master_info_file_tmp, + sizeof(master_info_file_tmp), + master_info_file, 0, + &mi->cmp_connection_name); + create_logfile_name_with_suffix(relay_log_info_file_tmp, + sizeof(relay_log_info_file_tmp), + relay_log_info_file, 0, + &mi->cmp_connection_name); + + fn_format(fname, master_info_file_tmp, mysql_data_home, "", 4+32); + if (mysql_file_stat(key_file_master_info, fname, &stat_area, MYF(0)) && + mysql_file_delete(key_file_master_info, fname, MYF(MY_WME))) + { + error=1; + goto err; + } + else if (global_system_variables.log_warnings > 1) + sql_print_information("Deleted Master_info file '%s'.", fname); + + // delete relay_log_info_file + fn_format(fname, relay_log_info_file_tmp, mysql_data_home, "", 4+32); + if (mysql_file_stat(key_file_relay_log_info, fname, &stat_area, MYF(0)) && + mysql_file_delete(key_file_relay_log_info, fname, MYF(MY_WME))) + { + error=1; + goto err; + } + else if (global_system_variables.log_warnings > 1) + sql_print_information("Deleted Master_info file '%s'.", fname); + + if (rpl_semi_sync_slave_enabled) + repl_semisync_slave.reset_slave(mi); +err: + mi->unlock_slave_threads(); + if (unlikely(error)) + my_error(sql_errno, MYF(0), errmsg); + DBUG_RETURN(error); +} + +/* + + Kill all Binlog_dump threads which previously talked to the same slave + ("same" means with the same server id). Indeed, if the slave stops, if the + Binlog_dump thread is waiting (mysql_cond_wait) for binlog update, then it + will keep existing until a query is written to the binlog. If the master is + idle, then this could last long, and if the slave reconnects, we could have 2 + Binlog_dump threads in SHOW PROCESSLIST, until a query is written to the + binlog. To avoid this, when the slave reconnects and sends COM_BINLOG_DUMP, + the master kills any existing thread with the slave's server id (if this id + is not zero; it will be true for real slaves, but false for mysqlbinlog when + it sends COM_BINLOG_DUMP to get a remote binlog dump). + + SYNOPSIS + kill_zombie_dump_threads() + slave_server_id the slave's server id +*/ + +struct kill_callback_arg +{ + kill_callback_arg(uint32 id): slave_server_id(id), thd(0) {} + uint32 slave_server_id; + THD *thd; +}; + +static my_bool kill_callback(THD *thd, kill_callback_arg *arg) +{ + if (thd->get_command() == COM_BINLOG_DUMP && + thd->variables.server_id == arg->slave_server_id) + { + arg->thd= thd; + mysql_mutex_lock(&thd->LOCK_thd_kill); // Lock from delete + mysql_mutex_lock(&thd->LOCK_thd_data); + return 1; + } + return 0; +} + + +void kill_zombie_dump_threads(uint32 slave_server_id) +{ + kill_callback_arg arg(slave_server_id); + server_threads.iterate(kill_callback, &arg); + + if (arg.thd) + { + /* + Here we do not call kill_one_thread() as + it will be slow because it will iterate through the list + again. We just to do kill the thread ourselves. + */ + arg.thd->awake_no_mutex(KILL_SLAVE_SAME_ID); + mysql_mutex_unlock(&arg.thd->LOCK_thd_kill); + mysql_mutex_unlock(&arg.thd->LOCK_thd_data); + } +} + +/** + Get value for a string parameter with error checking + + Note that in case of error the original string should not be updated! + + @ret 0 ok + @ret 1 error +*/ + +static bool get_string_parameter(char *to, const char *from, size_t length, + const char *name, CHARSET_INFO *cs) +{ + if (from) // Empty paramaters allowed + { + size_t from_length= strlen(from); + size_t from_numchars= cs->numchars(from, from + from_length); + if (from_numchars > length / cs->mbmaxlen) + { + my_error(ER_WRONG_STRING_LENGTH, MYF(0), from, name, + (int) (length / cs->mbmaxlen)); + return 1; + } + memcpy(to, from, from_length+1); + } + return 0; +} + + +/** + Execute a CHANGE MASTER statement. + + @param thd Pointer to THD object for the client thread executing the + statement. + + @param mi Pointer to Master_info object belonging to the slave's IO + thread. + + @param master_info_added Out parameter saying if the Master_info *mi was + added to the global list of masters. This is useful in error conditions + to know if caller should free Master_info *mi. + + @retval FALSE success + @retval TRUE error +*/ +bool change_master(THD* thd, Master_info* mi, bool *master_info_added) +{ + int thread_mask; + const char* errmsg= 0; + bool need_relay_log_purge= 1; + bool ret= FALSE; + char saved_host[HOSTNAME_LENGTH + 1]; + uint saved_port; + char saved_log_name[FN_REFLEN]; + Master_info::enum_using_gtid saved_using_gtid; + char master_info_file_tmp[FN_REFLEN]; + char relay_log_info_file_tmp[FN_REFLEN]; + my_off_t saved_log_pos; + LEX_MASTER_INFO* lex_mi= &thd->lex->mi; + DYNAMIC_ARRAY *do_ids, *ignore_ids; + + DBUG_ENTER("change_master"); + + DBUG_ASSERT(master_info_index); + mysql_mutex_assert_owner(&LOCK_active_mi); + + *master_info_added= false; + /* + We need to check if there is an empty master_host. Otherwise + change master succeeds, a master.info file is created containing + empty master_host string and when issuing: start slave; an error + is thrown stating that the server is not configured as slave. + (See BUG#28796). + */ + if (lex_mi->host && !*lex_mi->host) + { + my_error(ER_WRONG_ARGUMENTS, MYF(0), "MASTER_HOST"); + DBUG_RETURN(TRUE); + } + if (master_info_index->check_duplicate_master_info(&lex_mi->connection_name, + lex_mi->host, + lex_mi->port)) + DBUG_RETURN(TRUE); + + mi->lock_slave_threads(); + if (mi->killed) + { + /* connection was deleted while we waited for lock_slave_threads */ + mi->unlock_slave_threads(); + my_error(WARN_NO_MASTER_INFO, MYF(0), (int) mi->connection_name.length, + mi->connection_name.str); + DBUG_RETURN(TRUE); + } + + init_thread_mask(&thread_mask,mi,0 /*not inverse*/); + if (thread_mask) // We refuse if any slave thread is running + { + my_error(ER_SLAVE_MUST_STOP, MYF(0), (int) mi->connection_name.length, + mi->connection_name.str); + ret= TRUE; + goto err; + } + + THD_STAGE_INFO(thd, stage_changing_master); + + create_logfile_name_with_suffix(master_info_file_tmp, + sizeof(master_info_file_tmp), + master_info_file, 0, + &mi->cmp_connection_name); + create_logfile_name_with_suffix(relay_log_info_file_tmp, + sizeof(relay_log_info_file_tmp), + relay_log_info_file, 0, + &mi->cmp_connection_name); + + /* if new Master_info doesn't exists, add it */ + if (!master_info_index->get_master_info(&mi->connection_name, + Sql_condition::WARN_LEVEL_NOTE)) + { + if (master_info_index->add_master_info(mi, TRUE)) + { + my_error(ER_MASTER_INFO, MYF(0), + (int) lex_mi->connection_name.length, + lex_mi->connection_name.str); + ret= TRUE; + goto err; + } + *master_info_added= true; + } + if (global_system_variables.log_warnings > 1) + sql_print_information("Master connection name: '%.*s' " + "Master_info_file: '%s' " + "Relay_info_file: '%s'", + (int) mi->connection_name.length, + mi->connection_name.str, + master_info_file_tmp, relay_log_info_file_tmp); + + if (init_master_info(mi, master_info_file_tmp, relay_log_info_file_tmp, 0, + thread_mask)) + { + my_error(ER_MASTER_INFO, MYF(0), + (int) lex_mi->connection_name.length, + lex_mi->connection_name.str); + ret= TRUE; + goto err; + } + + /* + Data lock not needed since we have already stopped the running threads, + and we have the hold on the run locks which will keep all threads that + could possibly modify the data structures from running + */ + + /* + Before processing the command, save the previous state. + */ + strmake_buf(saved_host, mi->host); + saved_port= mi->port; + strmake_buf(saved_log_name, mi->master_log_name); + saved_log_pos= mi->master_log_pos; + saved_using_gtid= mi->using_gtid; + + /* + If the user specified host or port without binlog or position, + reset binlog's name to FIRST and position to 4. + */ + + if ((lex_mi->host || lex_mi->port) && !lex_mi->log_file_name && !lex_mi->pos) + { + mi->master_log_name[0] = 0; + mi->master_log_pos= BIN_LOG_HEADER_SIZE; + } + + if (lex_mi->log_file_name) + strmake_buf(mi->master_log_name, lex_mi->log_file_name); + if (lex_mi->pos) + { + mi->master_log_pos= lex_mi->pos; + } + DBUG_PRINT("info", ("master_log_pos: %lu", (ulong) mi->master_log_pos)); + + if (get_string_parameter(mi->host, lex_mi->host, sizeof(mi->host)-1, + "MASTER_HOST", system_charset_info) || + get_string_parameter(mi->user, lex_mi->user, sizeof(mi->user)-1, + "MASTER_USER", system_charset_info) || + get_string_parameter(mi->password, lex_mi->password, + sizeof(mi->password)-1, "MASTER_PASSWORD", + &my_charset_bin)) + { + ret= TRUE; + goto err; + } + + if (lex_mi->port) + mi->port = lex_mi->port; + if (lex_mi->connect_retry) + mi->connect_retry = lex_mi->connect_retry; + if (lex_mi->heartbeat_opt != LEX_MASTER_INFO::LEX_MI_UNCHANGED) + mi->heartbeat_period = lex_mi->heartbeat_period; + else + mi->heartbeat_period= (float) MY_MIN(SLAVE_MAX_HEARTBEAT_PERIOD, + (slave_net_timeout/2.0)); + mi->received_heartbeats= 0; // counter lives until master is CHANGEd + + /* + Reset the last time server_id list if the current CHANGE MASTER + is mentioning IGNORE_SERVER_IDS= (...) + */ + if (lex_mi->repl_ignore_server_ids_opt == LEX_MASTER_INFO::LEX_MI_ENABLE) + { + /* Check if the list contains replicate_same_server_id */ + for (uint i= 0; i < lex_mi->repl_ignore_server_ids.elements; i ++) + { + ulong s_id; + get_dynamic(&lex_mi->repl_ignore_server_ids, (uchar*) &s_id, i); + if (s_id == global_system_variables.server_id && replicate_same_server_id) + { + my_error(ER_SLAVE_IGNORE_SERVER_IDS, MYF(0), static_cast<int>(s_id)); + ret= TRUE; + goto err; + } + } + + /* All ok. Update the old server ids with the new ones. */ + update_change_master_ids(&lex_mi->repl_ignore_server_ids, + &mi->ignore_server_ids); + } + + if (lex_mi->ssl != LEX_MASTER_INFO::LEX_MI_UNCHANGED) + mi->ssl= (lex_mi->ssl == LEX_MASTER_INFO::LEX_MI_ENABLE); + + if (lex_mi->sql_delay != -1) + mi->rli.set_sql_delay(lex_mi->sql_delay); + + if (lex_mi->ssl_verify_server_cert != LEX_MASTER_INFO::LEX_MI_UNCHANGED) + mi->ssl_verify_server_cert= + (lex_mi->ssl_verify_server_cert == LEX_MASTER_INFO::LEX_MI_ENABLE); + + if (lex_mi->ssl_ca) + strmake_buf(mi->ssl_ca, lex_mi->ssl_ca); + if (lex_mi->ssl_capath) + strmake_buf(mi->ssl_capath, lex_mi->ssl_capath); + if (lex_mi->ssl_cert) + strmake_buf(mi->ssl_cert, lex_mi->ssl_cert); + if (lex_mi->ssl_cipher) + strmake_buf(mi->ssl_cipher, lex_mi->ssl_cipher); + if (lex_mi->ssl_key) + strmake_buf(mi->ssl_key, lex_mi->ssl_key); + if (lex_mi->ssl_crl) + strmake_buf(mi->ssl_crl, lex_mi->ssl_crl); + if (lex_mi->ssl_crlpath) + strmake_buf(mi->ssl_crlpath, lex_mi->ssl_crlpath); + +#ifndef HAVE_OPENSSL + if (lex_mi->ssl || lex_mi->ssl_ca || lex_mi->ssl_capath || + lex_mi->ssl_cert || lex_mi->ssl_cipher || lex_mi->ssl_key || + lex_mi->ssl_verify_server_cert || lex_mi->ssl_crl || lex_mi->ssl_crlpath) + push_warning(thd, Sql_condition::WARN_LEVEL_NOTE, + ER_SLAVE_IGNORED_SSL_PARAMS, + ER_THD(thd, ER_SLAVE_IGNORED_SSL_PARAMS)); +#endif + + if (lex_mi->relay_log_name) + { + need_relay_log_purge= 0; + char relay_log_name[FN_REFLEN]; + mi->rli.relay_log.make_log_name(relay_log_name, lex_mi->relay_log_name); + strmake_buf(mi->rli.group_relay_log_name, relay_log_name); + strmake_buf(mi->rli.event_relay_log_name, relay_log_name); + } + + if (lex_mi->relay_log_pos) + { + need_relay_log_purge= 0; + mi->rli.group_relay_log_pos= mi->rli.event_relay_log_pos= lex_mi->relay_log_pos; + } + + if (lex_mi->use_gtid_opt == LEX_MASTER_INFO::LEX_GTID_SLAVE_POS) + mi->using_gtid= Master_info::USE_GTID_SLAVE_POS; + else if (lex_mi->use_gtid_opt == LEX_MASTER_INFO::LEX_GTID_CURRENT_POS) + mi->using_gtid= Master_info::USE_GTID_CURRENT_POS; + else if (lex_mi->use_gtid_opt == LEX_MASTER_INFO::LEX_GTID_NO || + lex_mi->log_file_name || lex_mi->pos || + lex_mi->relay_log_name || lex_mi->relay_log_pos) + mi->using_gtid= Master_info::USE_GTID_NO; + + do_ids= ((lex_mi->repl_do_domain_ids_opt == + LEX_MASTER_INFO::LEX_MI_ENABLE) ? + &lex_mi->repl_do_domain_ids : NULL); + + ignore_ids= ((lex_mi->repl_ignore_domain_ids_opt == + LEX_MASTER_INFO::LEX_MI_ENABLE) ? + &lex_mi->repl_ignore_domain_ids : NULL); + + /* + Note: mi->using_gtid stores the previous state in case no MASTER_USE_GTID + is specified. + */ + if (mi->domain_id_filter.update_ids(do_ids, ignore_ids, mi->using_gtid)) + { + my_error(ER_MASTER_INFO, MYF(0), + (int) lex_mi->connection_name.length, + lex_mi->connection_name.str); + ret= TRUE; + goto err; + } + + /* + If user did specify neither host nor port nor any log name nor any log + pos, i.e. he specified only user/password/master_connect_retry, he probably + wants replication to resume from where it had left, i.e. from the + coordinates of the **SQL** thread (imagine the case where the I/O is ahead + of the SQL; restarting from the coordinates of the I/O would lose some + events which is probably unwanted when you are just doing minor changes + like changing master_connect_retry). + A side-effect is that if only the I/O thread was started, this thread may + restart from ''/4 after the CHANGE MASTER. That's a minor problem (it is a + much more unlikely situation than the one we are fixing here). + Note: coordinates of the SQL thread must be read here, before the + 'if (need_relay_log_purge)' block which resets them. + */ + if (!lex_mi->host && !lex_mi->port && + !lex_mi->log_file_name && !lex_mi->pos && + need_relay_log_purge) + { + /* + Sometimes mi->rli.master_log_pos == 0 (it happens when the SQL thread is + not initialized), so we use a MY_MAX(). + What happens to mi->rli.master_log_pos during the initialization stages + of replication is not 100% clear, so we guard against problems using + MY_MAX(). + */ + mi->master_log_pos = MY_MAX(BIN_LOG_HEADER_SIZE, + mi->rli.group_master_log_pos); + strmake_buf(mi->master_log_name, mi->rli.group_master_log_name); + } + + /* + Relay log's IO_CACHE may not be inited, if rli->inited==0 (server was never + a slave before). + */ + if (flush_master_info(mi, FALSE, FALSE)) + { + my_error(ER_RELAY_LOG_INIT, MYF(0), "Failed to flush master info file"); + ret= TRUE; + goto err; + } + if (need_relay_log_purge) + { + THD_STAGE_INFO(thd, stage_purging_old_relay_logs); + if (purge_relay_logs(&mi->rli, thd, + 0 /* not only reset, but also reinit */, + &errmsg)) + { + my_error(ER_RELAY_LOG_FAIL, MYF(0), errmsg); + ret= TRUE; + goto err; + } + } + else + { + const char* msg; + /* Relay log is already initialized */ + if (init_relay_log_pos(&mi->rli, + mi->rli.group_relay_log_name, + mi->rli.group_relay_log_pos, + 0 /*no data lock*/, + &msg, 0)) + { + my_error(ER_RELAY_LOG_INIT, MYF(0), msg); + ret= TRUE; + goto err; + } + } + /* + Coordinates in rli were spoilt by the 'if (need_relay_log_purge)' block, + so restore them to good values. If we left them to ''/0, that would work; + but that would fail in the case of 2 successive CHANGE MASTER (without a + START SLAVE in between): because first one would set the coords in mi to + the good values of those in rli, the set those in rli to ''/0, then + second CHANGE MASTER would set the coords in mi to those of rli, i.e. to + ''/0: we have lost all copies of the original good coordinates. + That's why we always save good coords in rli. + */ + mi->rli.group_master_log_pos= mi->master_log_pos; + DBUG_PRINT("info", ("master_log_pos: %lu", (ulong) mi->master_log_pos)); + strmake_buf(mi->rli.group_master_log_name,mi->master_log_name); + + if (!mi->rli.group_master_log_name[0]) // uninitialized case + mi->rli.group_master_log_pos=0; + + mysql_mutex_lock(&mi->rli.data_lock); + mi->rli.abort_pos_wait++; /* for MASTER_POS_WAIT() to abort */ + /* Clear the errors, for a clean start */ + mi->rli.clear_error(); + mi->rli.clear_until_condition(); + mi->rli.slave_skip_counter= 0; + + sql_print_information("'CHANGE MASTER TO executed'. " + "Previous state master_host='%s', master_port='%u', master_log_file='%s', " + "master_log_pos='%ld'. " + "New state master_host='%s', master_port='%u', master_log_file='%s', " + "master_log_pos='%ld'.", saved_host, saved_port, saved_log_name, + (ulong) saved_log_pos, mi->host, mi->port, mi->master_log_name, + (ulong) mi->master_log_pos); + if (saved_using_gtid != Master_info::USE_GTID_NO || + mi->using_gtid != Master_info::USE_GTID_NO) + sql_print_information("Previous Using_Gtid=%s. New Using_Gtid=%s", + mi->using_gtid_astext(saved_using_gtid), + mi->using_gtid_astext(mi->using_gtid)); + + /* + If we don't write new coordinates to disk now, then old will remain in + relay-log.info until START SLAVE is issued; but if mysqld is shutdown + before START SLAVE, then old will remain in relay-log.info, and will be the + in-memory value at restart (thus causing errors, as the old relay log does + not exist anymore). + */ + if (mi->rli.flush()) + ret= 1; + mysql_cond_broadcast(&mi->data_cond); + mysql_mutex_unlock(&mi->rli.data_lock); + +err: + mi->unlock_slave_threads(); + if (ret == FALSE) + my_ok(thd); + DBUG_RETURN(ret); +} + + +/** + Execute a RESET MASTER statement. + + @param thd Pointer to THD object of the client thread executing the + statement. + + @retval 0 success + @retval 1 error +*/ +int reset_master(THD* thd, rpl_gtid *init_state, uint32 init_state_len, + ulong next_log_number) +{ + if (!mysql_bin_log.is_open()) + { + my_message(ER_FLUSH_MASTER_BINLOG_CLOSED, + ER_THD(thd, ER_FLUSH_MASTER_BINLOG_CLOSED), MYF(0)); + return 1; + } + +#ifdef WITH_WSREP + if (WSREP(thd)) + { + /* RESET MASTER will initialize GTID sequence, and that would happen locally + in this node, so better reject it + */ + my_message(ER_NOT_ALLOWED_COMMAND, + "RESET MASTER not allowed when node is in cluster", MYF(0)); + return 1; + } +#endif /* WITH_WSREP */ + bool ret= 0; + /* Temporarily disable master semisync before resetting master. */ + repl_semisync_master.before_reset_master(); + ret= mysql_bin_log.reset_logs(thd, 1, init_state, init_state_len, + next_log_number); + repl_semisync_master.after_reset_master(); + DBUG_EXECUTE_IF("crash_after_reset_master", DBUG_SUICIDE();); + + return ret; +} + + +/** + Execute a SHOW BINLOG EVENTS statement. + + @param thd Pointer to THD object for the client thread executing the + statement. + + @retval FALSE success + @retval TRUE failure +*/ +bool mysql_show_binlog_events(THD* thd) +{ + Protocol *protocol= thd->protocol; + List<Item> field_list; + char errmsg_buf[MYSYS_ERRMSG_SIZE]; + const char *errmsg = 0; + bool ret = TRUE; + /* + Using checksum validate the correctness of event pos specified in show + binlog events command. + */ + bool verify_checksum_once= false; + IO_CACHE log; + File file = -1; + MYSQL_BIN_LOG *binary_log= NULL; + int old_max_allowed_packet= thd->variables.max_allowed_packet; + Master_info *mi= 0; + LOG_INFO linfo; + LEX_MASTER_INFO *lex_mi= &thd->lex->mi; + enum enum_binlog_checksum_alg checksum_alg; + my_off_t binlog_size; + MY_STAT s; + + DBUG_ENTER("mysql_show_binlog_events"); + + Log_event::init_show_field_list(thd, &field_list); + if (protocol->send_result_set_metadata(&field_list, + Protocol::SEND_NUM_ROWS | Protocol::SEND_EOF)) + DBUG_RETURN(TRUE); + + DBUG_ASSERT(thd->lex->sql_command == SQLCOM_SHOW_BINLOG_EVENTS || + thd->lex->sql_command == SQLCOM_SHOW_RELAYLOG_EVENTS); + + /* select which binary log to use: binlog or relay */ + if ( thd->lex->sql_command == SQLCOM_SHOW_BINLOG_EVENTS ) + { + binary_log= &mysql_bin_log; + } + else /* showing relay log contents */ + { + if (!lex_mi->connection_name.str) + lex_mi->connection_name= thd->variables.default_master_connection; + if (!(mi= get_master_info(&lex_mi->connection_name, + Sql_condition::WARN_LEVEL_ERROR))) + { + DBUG_RETURN(TRUE); + } + binary_log= &(mi->rli.relay_log); + } + + Format_description_log_event *description_event= new + Format_description_log_event(3); /* MySQL 4.0 by default */ + + if (binary_log->is_open()) + { + SELECT_LEX_UNIT *unit= &thd->lex->unit; + ha_rows event_count; + my_off_t pos = MY_MAX(BIN_LOG_HEADER_SIZE, lex_mi->pos); // user-friendly + char search_file_name[FN_REFLEN], *name; + const char *log_file_name = lex_mi->log_file_name; + mysql_mutex_t *log_lock = binary_log->get_log_lock(); + Log_event* ev; + + if (mi) + { + /* We can unlock the mutex as we have a lock on the file */ + mi->release(); + mi= 0; + } + + unit->set_limit(thd->lex->current_select); + + name= search_file_name; + if (log_file_name) + binary_log->make_log_name(search_file_name, log_file_name); + else + name=0; // Find first log + + linfo.index_file_offset = 0; + + if (binary_log->find_log_pos(&linfo, name, 1)) + { + errmsg = "Could not find target log"; + goto err; + } + + thd->set_current_linfo(&linfo); + + if ((file=open_binlog(&log, linfo.log_file_name, &errmsg)) < 0) + goto err; + + my_stat(linfo.log_file_name, &s, MYF(0)); + binlog_size= s.st_size; + if (lex_mi->pos > binlog_size) + { + sprintf(errmsg_buf, "Invalid pos specified. Requested from pos:%llu is " + "greater than actual file size:%lu\n", lex_mi->pos, + (ulong)s.st_size); + errmsg= errmsg_buf; + goto err; + } + + /* + to account binlog event header size + */ + thd->variables.max_allowed_packet += MAX_LOG_EVENT_HEADER; + + mysql_mutex_lock(log_lock); + + /* + open_binlog() sought to position 4. + Read the first event in case it's a Format_description_log_event, to + know the format. If there's no such event, we are 3.23 or 4.x. This + code, like before, can't read 3.23 binlogs. + Also read the second event, in case it's a Start_encryption_log_event. + This code will fail on a mixed relay log (one which has Format_desc then + Rotate then Format_desc). + */ + + my_off_t scan_pos = BIN_LOG_HEADER_SIZE; + while (scan_pos < pos) + { + ev= Log_event::read_log_event(&log, description_event, + opt_master_verify_checksum); + scan_pos = my_b_tell(&log); + if (ev == NULL || !ev->is_valid()) + { + mysql_mutex_unlock(log_lock); + errmsg = "Wrong offset or I/O error"; + goto err; + } + if (ev->get_type_code() == FORMAT_DESCRIPTION_EVENT) + { + delete description_event; + description_event= (Format_description_log_event*) ev; + } + else + { + if (ev->get_type_code() == START_ENCRYPTION_EVENT) + { + if (description_event->start_decryption((Start_encryption_log_event*) ev)) + { + delete ev; + mysql_mutex_unlock(log_lock); + errmsg = "Could not initialize decryption of binlog."; + goto err; + } + } + delete ev; + break; + } + } + + if (lex_mi->pos > BIN_LOG_HEADER_SIZE) + { + checksum_alg= description_event->checksum_alg; + /* Validate user given position using checksum */ + if (checksum_alg != BINLOG_CHECKSUM_ALG_OFF && + checksum_alg != BINLOG_CHECKSUM_ALG_UNDEF) + { + if (!opt_master_verify_checksum) + verify_checksum_once= true; + my_b_seek(&log, pos); + } + else + { + my_off_t cur_pos= my_b_tell(&log); + ulong next_event_len= 0; + uchar buff[IO_SIZE]; + while (cur_pos < pos) + { + my_b_seek(&log, cur_pos + EVENT_LEN_OFFSET); + if (my_b_read(&log, (uchar *)buff, sizeof(next_event_len))) + { + mysql_mutex_unlock(log_lock); + errmsg = "Could not read event_length"; + goto err; + } + next_event_len= uint4korr(buff); + cur_pos= cur_pos + next_event_len; + } + if (cur_pos > pos) + { + mysql_mutex_unlock(log_lock); + errmsg= "Invalid input pos specified please provide valid one."; + goto err; + } + my_b_seek(&log, cur_pos); + } + } + + for (event_count = 0; + (ev = Log_event::read_log_event(&log, + description_event, + (opt_master_verify_checksum || + verify_checksum_once))); ) + { + if (!unit->lim.check_offset(event_count) && + ev->net_send(protocol, linfo.log_file_name, pos)) + { + errmsg = "Net error"; + delete ev; + mysql_mutex_unlock(log_lock); + goto err; + } + + if (ev->get_type_code() == FORMAT_DESCRIPTION_EVENT) + { + Format_description_log_event* new_fdle= + (Format_description_log_event*) ev; + new_fdle->copy_crypto_data(description_event); + delete description_event; + description_event= new_fdle; + } + else + { + if (ev->get_type_code() == START_ENCRYPTION_EVENT) + { + if (description_event->start_decryption((Start_encryption_log_event*) ev)) + { + errmsg = "Error starting decryption"; + delete ev; + mysql_mutex_unlock(log_lock); + goto err; + } + } + delete ev; + } + + verify_checksum_once= false; + pos = my_b_tell(&log); + + if (++event_count >= unit->lim.get_select_limit()) + break; + } + + if (unlikely(event_count < unit->lim.get_select_limit() && log.error)) + { + errmsg = "Wrong offset or I/O error"; + mysql_mutex_unlock(log_lock); + goto err; + } + + mysql_mutex_unlock(log_lock); + } + else if (mi) + mi->release(); + + // Check that linfo is still on the function scope. + DEBUG_SYNC(thd, "after_show_binlog_events"); + + ret= FALSE; + +err: + delete description_event; + if (file >= 0) + { + end_io_cache(&log); + mysql_file_close(file, MYF(MY_WME)); + } + + if (errmsg) + my_error(ER_ERROR_WHEN_EXECUTING_COMMAND, MYF(0), + "SHOW BINLOG EVENTS", errmsg); + else + my_eof(thd); + + thd->reset_current_linfo(); + thd->variables.max_allowed_packet= old_max_allowed_packet; + DBUG_RETURN(ret); +} + + +void show_binlog_info_get_fields(THD *thd, List<Item> *field_list) +{ + MEM_ROOT *mem_root= thd->mem_root; + field_list->push_back(new (mem_root) + Item_empty_string(thd, "File", FN_REFLEN), + mem_root); + field_list->push_back(new (mem_root) + Item_return_int(thd, "Position", 20, + MYSQL_TYPE_LONGLONG), + mem_root); + field_list->push_back(new (mem_root) + Item_empty_string(thd, "Binlog_Do_DB", 255), + mem_root); + field_list->push_back(new (mem_root) + Item_empty_string(thd, "Binlog_Ignore_DB", 255), + mem_root); +} + + +/** + Execute a SHOW BINLOG STATUS statement. + + @param thd Pointer to THD object for the client thread executing the + statement. + + @retval FALSE success + @retval TRUE failure +*/ +bool show_binlog_info(THD* thd) +{ + Protocol *protocol= thd->protocol; + DBUG_ENTER("show_binlog_info"); + + List<Item> field_list; + show_binlog_info_get_fields(thd, &field_list); + + if (protocol->send_result_set_metadata(&field_list, + Protocol::SEND_NUM_ROWS | Protocol::SEND_EOF)) + DBUG_RETURN(TRUE); + protocol->prepare_for_resend(); + + if (mysql_bin_log.is_open()) + { + LOG_INFO li; + mysql_bin_log.get_current_log(&li); + size_t dir_len = dirname_length(li.log_file_name); + protocol->store(li.log_file_name + dir_len, &my_charset_bin); + protocol->store((ulonglong) li.pos); + protocol->store(binlog_filter->get_do_db()); + protocol->store(binlog_filter->get_ignore_db()); + if (protocol->write()) + DBUG_RETURN(TRUE); + } + my_eof(thd); + DBUG_RETURN(FALSE); +} + + +void show_binlogs_get_fields(THD *thd, List<Item> *field_list) +{ + MEM_ROOT *mem_root= thd->mem_root; + field_list->push_back(new (mem_root) + Item_empty_string(thd, "Log_name", 255), + mem_root); + field_list->push_back(new (mem_root) + Item_return_int(thd, "File_size", 20, + MYSQL_TYPE_LONGLONG), + mem_root); +} + + +/** + Execute a SHOW BINARY LOGS statement. + + @param thd Pointer to THD object for the client thread executing the + statement. + + @retval FALSE success + @retval TRUE failure + + @notes + We only keep the index locked while reading all file names as + if there are 1000+ binary logs, there can be a serious impact + as getting the file sizes can take some notable time (up to 20 seconds + has been reported) and we don't want to block log rotations for that long. +*/ + +#define BINLOG_INDEX_RETRY_COUNT 5 + +bool show_binlogs(THD* thd) +{ + LOG_INFO cur; + MEM_ROOT mem_root; + binlog_file_entry *list; + List<Item> field_list; + Protocol *protocol= thd->protocol; + uint retry_count= 0; + size_t cur_dir_len; + DBUG_ENTER("show_binlogs"); + + if (!mysql_bin_log.is_open()) + { + my_error(ER_NO_BINARY_LOGGING, MYF(0)); + DBUG_RETURN(TRUE); + } + + show_binlogs_get_fields(thd, &field_list); + + if (protocol->send_result_set_metadata(&field_list, + Protocol::SEND_NUM_ROWS | Protocol::SEND_EOF)) + DBUG_RETURN(TRUE); + + init_alloc_root(PSI_INSTRUMENT_ME, &mem_root, 8192, 0, MYF(MY_THREAD_SPECIFIC)); +retry: + /* + The current mutex handling here is to ensure we get the current log position + and all the log files from the index in sync without any index rotation + in between. + */ + mysql_mutex_lock(mysql_bin_log.get_log_lock()); + mysql_bin_log.lock_index(); + mysql_bin_log.raw_get_current_log(&cur); + mysql_mutex_unlock(mysql_bin_log.get_log_lock()); + + /* The following call unlocks lock_index */ + if ((!(list= get_binlog_list(&mem_root, false, true)))) + goto err; + + DEBUG_SYNC(thd, "at_after_lock_index"); + + // the 1st loop computes the sizes; If stat() fails, then retry + cur_dir_len= dirname_length(cur.log_file_name); + for (binlog_file_entry *cur_link= list; cur_link; cur_link= cur_link->next) + { + const char *fname= cur_link->name.str; + size_t dir_len= dirname_length(fname); + size_t length= cur_link->name.length- dir_len; + + /* Skip directory name as we shouldn't include this in the result */ + cur_link->name.str+= dir_len; + cur_link->name.length-= dir_len; + + if (!(strncmp(fname+dir_len, cur.log_file_name+cur_dir_len, length))) + cur_link->size= cur.pos; /* The active log, use the active position */ + else + { + MY_STAT stat_info; + if (mysql_file_stat(key_file_binlog, fname, &stat_info, MYF(0))) + cur_link->size= stat_info.st_size; + else + { + if (retry_count++ < BINLOG_INDEX_RETRY_COUNT) + { + free_root(&mem_root, MYF(MY_MARK_BLOCKS_FREE)); + goto retry; + } + cur_link->size= 0; + } + } + } + + for (binlog_file_entry *cur_link= list; cur_link; cur_link= cur_link->next) + { + protocol->prepare_for_resend(); + protocol->store(cur_link->name.str, cur_link->name.length, &my_charset_bin); + protocol->store((ulonglong) cur_link->size); + if (protocol->write()) + goto err; + } + free_root(&mem_root, MYF(0)); + my_eof(thd); + DBUG_RETURN(FALSE); + +err: + free_root(&mem_root, MYF(0)); + DBUG_RETURN(TRUE); +} + +/** + Load data's io cache specific hook to be executed + before a chunk of data is being read into the cache's buffer + The fuction instantianates and writes into the binlog + replication events along LOAD DATA processing. + + @param file pointer to io-cache + @retval 0 success + @retval 1 failure +*/ +int log_loaded_block(IO_CACHE* file, uchar *Buffer, size_t Count) +{ + DBUG_ENTER("log_loaded_block"); + LOAD_FILE_IO_CACHE *lf_info= static_cast<LOAD_FILE_IO_CACHE*>(file); + uint block_len; + /* buffer contains position where we started last read */ + uchar* buffer= (uchar*) my_b_get_buffer_start(file); + uint max_event_size= lf_info->thd->variables.max_allowed_packet; + + if (lf_info->thd->is_current_stmt_binlog_format_row()) + goto ret; + if (lf_info->last_pos_in_file != HA_POS_ERROR && + lf_info->last_pos_in_file >= my_b_get_pos_in_file(file)) + goto ret; + + for (block_len= (uint) (my_b_get_bytes_in_buffer(file)); block_len > 0; + buffer += MY_MIN(block_len, max_event_size), + block_len -= MY_MIN(block_len, max_event_size)) + { + lf_info->last_pos_in_file= my_b_get_pos_in_file(file); + if (lf_info->wrote_create_file) + { + Append_block_log_event a(lf_info->thd, lf_info->thd->db.str, buffer, + MY_MIN(block_len, max_event_size), + lf_info->log_delayed); + if (mysql_bin_log.write(&a)) + DBUG_RETURN(1); + } + else + { + Begin_load_query_log_event b(lf_info->thd, lf_info->thd->db.str, + buffer, + MY_MIN(block_len, max_event_size), + lf_info->log_delayed); + if (mysql_bin_log.write(&b)) + DBUG_RETURN(1); + lf_info->wrote_create_file= 1; + } + } +ret: + int res= Buffer ? lf_info->real_read_function(file, Buffer, Count) : 0; + DBUG_RETURN(res); +} + + +/** + Initialise the slave replication state from the mysql.gtid_slave_pos table. + + This is called each time an SQL thread starts, but the data is only actually + loaded on the first call. + + The slave state is the last GTID applied on the slave within each + replication domain. + + To avoid row lock contention, there are multiple rows for each domain_id. + The one containing the current slave state is the one with the maximal + sub_id value, within each domain_id. + + CREATE TABLE mysql.gtid_slave_pos ( + domain_id INT UNSIGNED NOT NULL, + sub_id BIGINT UNSIGNED NOT NULL, + server_id INT UNSIGNED NOT NULL, + seq_no BIGINT UNSIGNED NOT NULL, + PRIMARY KEY (domain_id, sub_id)) +*/ + +void +rpl_init_gtid_slave_state() +{ + rpl_global_gtid_slave_state= new rpl_slave_state; +} + + +void +rpl_deinit_gtid_slave_state() +{ + delete rpl_global_gtid_slave_state; +} + + +void +rpl_init_gtid_waiting() +{ + rpl_global_gtid_waiting.init(); +} + + +void +rpl_deinit_gtid_waiting() +{ + rpl_global_gtid_waiting.destroy(); +} + + +/* + Format the current GTID state as a string, for returning the value of + @@global.gtid_slave_pos. + + If the flag use_binlog is true, then the contents of the binary log (if + enabled) is merged into the current GTID state (@@global.gtid_current_pos). +*/ +int +rpl_append_gtid_state(String *dest, bool use_binlog) +{ + int err; + rpl_gtid *gtid_list= NULL; + uint32 num_gtids= 0; + + if (use_binlog && opt_bin_log && + (err= mysql_bin_log.get_most_recent_gtid_list(>id_list, &num_gtids))) + return err; + + err= rpl_global_gtid_slave_state->tostring(dest, gtid_list, num_gtids); + my_free(gtid_list); + + return err; +} + + +/* + Load the current GTID position into a slave_connection_state, for use when + connecting to a master server with GTID. + + If the flag use_binlog is true, then the contents of the binary log (if + enabled) is merged into the current GTID state (master_use_gtid=current_pos). +*/ +int +rpl_load_gtid_state(slave_connection_state *state, bool use_binlog) +{ + int err; + rpl_gtid *gtid_list= NULL; + uint32 num_gtids= 0; + + if (use_binlog && opt_bin_log && + (err= mysql_bin_log.get_most_recent_gtid_list(>id_list, &num_gtids))) + return err; + + err= state->load(rpl_global_gtid_slave_state, gtid_list, num_gtids); + my_free(gtid_list); + + return err; +} + + +bool +rpl_gtid_pos_check(THD *thd, char *str, size_t len) +{ + slave_connection_state tmp_slave_state; + bool gave_conflict_warning= false, gave_missing_warning= false; + + /* Check that we can parse the supplied string. */ + if (tmp_slave_state.load(str, len)) + return true; + + /* + Check our own binlog for any of our own transactions that are newer + than the GTID state the user is requesting. Any such transactions would + result in an out-of-order binlog, which could break anyone replicating + with us as master. + + So give an error if this is found, requesting the user to do a + RESET MASTER (to clean up the binlog) if they really want this. + */ + if (mysql_bin_log.is_open()) + { + rpl_gtid *binlog_gtid_list= NULL; + uint32 num_binlog_gtids= 0; + uint32 i; + + if (mysql_bin_log.get_most_recent_gtid_list(&binlog_gtid_list, + &num_binlog_gtids)) + { + my_error(ER_OUT_OF_RESOURCES, MYF(MY_WME)); + return true; + } + for (i= 0; i < num_binlog_gtids; ++i) + { + rpl_gtid *binlog_gtid= &binlog_gtid_list[i]; + rpl_gtid *slave_gtid; + if (binlog_gtid->server_id != global_system_variables.server_id) + continue; + if (!(slave_gtid= tmp_slave_state.find(binlog_gtid->domain_id))) + { + if (opt_gtid_strict_mode) + { + my_error(ER_MASTER_GTID_POS_MISSING_DOMAIN, MYF(0), + binlog_gtid->domain_id, binlog_gtid->domain_id, + binlog_gtid->server_id, binlog_gtid->seq_no); + break; + } + else if (!gave_missing_warning) + { + push_warning_printf(thd, Sql_condition::WARN_LEVEL_WARN, + ER_MASTER_GTID_POS_MISSING_DOMAIN, + ER_THD(thd, ER_MASTER_GTID_POS_MISSING_DOMAIN), + binlog_gtid->domain_id, binlog_gtid->domain_id, + binlog_gtid->server_id, binlog_gtid->seq_no); + gave_missing_warning= true; + } + } + else if (slave_gtid->seq_no < binlog_gtid->seq_no) + { + if (opt_gtid_strict_mode) + { + my_error(ER_MASTER_GTID_POS_CONFLICTS_WITH_BINLOG, MYF(0), + slave_gtid->domain_id, slave_gtid->server_id, + slave_gtid->seq_no, binlog_gtid->domain_id, + binlog_gtid->server_id, binlog_gtid->seq_no); + break; + } + else if (!gave_conflict_warning) + { + push_warning_printf(thd, Sql_condition::WARN_LEVEL_WARN, + ER_MASTER_GTID_POS_CONFLICTS_WITH_BINLOG, + ER_THD(thd, ER_MASTER_GTID_POS_CONFLICTS_WITH_BINLOG), + slave_gtid->domain_id, slave_gtid->server_id, + slave_gtid->seq_no, binlog_gtid->domain_id, + binlog_gtid->server_id, binlog_gtid->seq_no); + gave_conflict_warning= true; + } + } + } + my_free(binlog_gtid_list); + if (i != num_binlog_gtids) + return true; + } + + return false; +} + + +bool +rpl_gtid_pos_update(THD *thd, char *str, size_t len) +{ + if (rpl_global_gtid_slave_state->load(thd, str, len, true, true)) + { + my_error(ER_FAILED_GTID_STATE_INIT, MYF(0)); + return true; + } + else + return false; +} + +int compare_log_name(const char *log_1, const char *log_2) { + int res= 1; + const char *ext1_str= strrchr(log_1, '.'); + const char *ext2_str= strrchr(log_2, '.'); + char file_name_1[255], file_name_2[255]; + strmake(file_name_1, log_1, (ext1_str - log_1)); + strmake(file_name_2, log_2, (ext2_str - log_2)); + char *endptr = NULL; + res= strcmp(file_name_1, file_name_2); + if (!res) + { + ulong ext1= strtoul(++ext1_str, &endptr, 10); + ulong ext2= strtoul(++ext2_str, &endptr, 10); + res= (ext1 > ext2 ? 1 : ((ext1 == ext2) ? 0 : -1)); + } + return res; +} + +#endif /* HAVE_REPLICATION */ |