diff options
Diffstat (limited to 'storage/tokudb/PerconaFT/third_party/xz-4.999.9beta/po/xz.pot')
-rw-r--r-- | storage/tokudb/PerconaFT/third_party/xz-4.999.9beta/po/xz.pot | 481 |
1 files changed, 481 insertions, 0 deletions
diff --git a/storage/tokudb/PerconaFT/third_party/xz-4.999.9beta/po/xz.pot b/storage/tokudb/PerconaFT/third_party/xz-4.999.9beta/po/xz.pot new file mode 100644 index 00000000..dc6e3201 --- /dev/null +++ b/storage/tokudb/PerconaFT/third_party/xz-4.999.9beta/po/xz.pot @@ -0,0 +1,481 @@ +# SOME DESCRIPTIVE TITLE. +# This file is put in the public domain. +# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR. +# +#, fuzzy +msgid "" +msgstr "" +"Project-Id-Version: PACKAGE VERSION\n" +"Report-Msgid-Bugs-To: lasse.collin@tukaani.org\n" +"POT-Creation-Date: 2009-08-27 18:37+0300\n" +"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" +"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n" +"Language-Team: LANGUAGE <LL@li.org>\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=CHARSET\n" +"Content-Transfer-Encoding: 8bit\n" + +#: src/xz/args.c:289 +#, c-format +msgid "%s: Unknown file format type" +msgstr "" + +#: src/xz/args.c:312 src/xz/args.c:320 +#, c-format +msgid "%s: Unsupported integrity check type" +msgstr "" + +#: src/xz/args.c:334 +msgid "Only one file can be specified with `--files'or `--files0'." +msgstr "" + +#: src/xz/args.c:392 +msgid "The environment variable XZ_OPT contains too many arguments" +msgstr "" + +#: src/xz/coder.c:95 +msgid "Maximum number of filters is four" +msgstr "" + +#: src/xz/coder.c:108 +#, c-format +msgid "Memory usage limit (%<PRIu64> MiB) is too small for the given filter setup (%<PRIu64> MiB)" +msgstr "" + +#: src/xz/coder.c:128 +msgid "Using a preset in raw mode is discouraged." +msgstr "" + +#: src/xz/coder.c:130 +msgid "The exact options of the presets may vary between software versions." +msgstr "" + +#: src/xz/coder.c:158 +msgid "The .lzma format supports only the LZMA1 filter" +msgstr "" + +#: src/xz/coder.c:166 +msgid "LZMA1 cannot be used with the .xz format" +msgstr "" + +#: src/xz/coder.c:186 +#, c-format +msgid "%s MiB (%s B) of memory is required per thread, limit is %s MiB (%s B)" +msgstr "" + +#: src/xz/coder.c:553 +#, c-format +msgid "Limit was %s MiB, but %s MiB would have been needed" +msgstr "" + +#: src/xz/file_io.c:86 +#, c-format +msgid "%s: File seems to be moved, not removing" +msgstr "" + +#: src/xz/file_io.c:93 +#, c-format +msgid "%s: Cannot remove: %s" +msgstr "" + +#: src/xz/file_io.c:118 +#, c-format +msgid "%s: Cannot set the file owner: %s" +msgstr "" + +#: src/xz/file_io.c:124 +#, c-format +msgid "%s: Cannot set the file group: %s" +msgstr "" + +#: src/xz/file_io.c:143 +#, c-format +msgid "%s: Cannot set the file permissions: %s" +msgstr "" + +#: src/xz/file_io.c:281 src/xz/file_io.c:360 +#, c-format +msgid "%s: Is a symbolic link, skipping" +msgstr "" + +#: src/xz/file_io.c:395 +#, c-format +msgid "%s: Is a directory, skipping" +msgstr "" + +#: src/xz/file_io.c:402 +#, c-format +msgid "%s: Not a regular file, skipping" +msgstr "" + +#: src/xz/file_io.c:419 +#, c-format +msgid "%s: File has setuid or setgid bit set, skipping" +msgstr "" + +#: src/xz/file_io.c:426 +#, c-format +msgid "%s: File has sticky bit set, skipping" +msgstr "" + +#: src/xz/file_io.c:433 +#, c-format +msgid "%s: Input file has more than one hard link, skipping" +msgstr "" + +#: src/xz/file_io.c:555 +#, c-format +msgid "%s: Closing the file failed: %s" +msgstr "" + +#: src/xz/file_io.c:663 +#, c-format +msgid "%s: Read error: %s" +msgstr "" + +#: src/xz/file_io.c:708 +#, c-format +msgid "%s: Write error: %s" +msgstr "" + +#: src/xz/main.c:57 +msgid "Writing to standard output failed" +msgstr "" + +#: src/xz/main.c:60 +msgid "Unknown error" +msgstr "" + +#: src/xz/main.c:117 +#, c-format +msgid "%s: Error reading filenames: %s" +msgstr "" + +#: src/xz/main.c:124 +#, c-format +msgid "%s: Unexpected end of input when reading filenames" +msgstr "" + +#: src/xz/main.c:148 +#, c-format +msgid "%s: Null character found when reading filenames; maybe you meant to use `--files0' instead of `--files'?" +msgstr "" + +#: src/xz/main.c:272 +msgid "Cannot read data from standard input when reading filenames from standard input" +msgstr "" + +#: src/xz/message.c:840 src/xz/message.c:884 +msgid "Internal error (bug)" +msgstr "" + +#: src/xz/message.c:847 +msgid "Cannot establish signal handlers" +msgstr "" + +#: src/xz/message.c:856 +msgid "No integrity check; not verifying file integrity" +msgstr "" + +#: src/xz/message.c:859 +msgid "Unsupported type of integrity check; not verifying file integrity" +msgstr "" + +#: src/xz/message.c:866 +msgid "Memory usage limit reached" +msgstr "" + +#: src/xz/message.c:869 +msgid "File format not recognized" +msgstr "" + +#: src/xz/message.c:872 +msgid "Unsupported options" +msgstr "" + +#: src/xz/message.c:875 +msgid "Compressed data is corrupt" +msgstr "" + +#: src/xz/message.c:878 +msgid "Unexpected end of input" +msgstr "" + +#: src/xz/message.c:897 +#, c-format +msgid "%s: Filter chain:" +msgstr "" + +#: src/xz/message.c:1008 +#, c-format +msgid "Try `%s --help' for more information." +msgstr "" + +#: src/xz/message.c:1027 +#, c-format +msgid "" +"Usage: %s [OPTION]... [FILE]...\n" +"Compress or decompress FILEs in the .xz format.\n" +"\n" +msgstr "" + +#: src/xz/message.c:1031 +msgid "Mandatory arguments to long options are mandatory for short options too.\n" +msgstr "" + +#: src/xz/message.c:1035 +msgid " Operation mode:\n" +msgstr "" + +#: src/xz/message.c:1038 +msgid "" +" -z, --compress force compression\n" +" -d, --decompress force decompression\n" +" -t, --test test compressed file integrity\n" +" -l, --list list information about files" +msgstr "" + +#: src/xz/message.c:1044 +msgid "" +"\n" +" Operation modifiers:\n" +msgstr "" + +#: src/xz/message.c:1047 +msgid "" +" -k, --keep keep (don't delete) input files\n" +" -f, --force force overwrite of output file and (de)compress links\n" +" -c, --stdout write to standard output and don't delete input files" +msgstr "" + +#: src/xz/message.c:1053 +msgid "" +" -S, --suffix=.SUF use the suffix `.SUF' on compressed files\n" +" --files=[FILE] read filenames to process from FILE; if FILE is\n" +" omitted, filenames are read from the standard input;\n" +" filenames must be terminated with the newline character\n" +" --files0=[FILE] like --files but use the null character as terminator" +msgstr "" + +#: src/xz/message.c:1060 +msgid "" +"\n" +" Basic file format and compression options:\n" +msgstr "" + +#: src/xz/message.c:1062 +msgid "" +" -F, --format=FMT file format to encode or decode; possible values are\n" +" `auto' (default), `xz', `lzma', and `raw'\n" +" -C, --check=CHECK integrity check type: `crc32', `crc64' (default),\n" +" or `sha256'" +msgstr "" + +#: src/xz/message.c:1069 +msgid "" +" -0 .. -9 compression preset; 0-2 fast compression, 3-5 good\n" +" compression, 6-9 excellent compression; default is 6" +msgstr "" + +#: src/xz/message.c:1073 +msgid "" +" -e, --extreme use more CPU time when encoding to increase compression\n" +" ratio without increasing memory usage of the decoder" +msgstr "" + +#: src/xz/message.c:1078 +msgid "" +" -M, --memory=NUM use roughly NUM bytes of memory at maximum; 0 indicates\n" +" the default setting, which depends on the operation mode\n" +" and the amount of physical memory (RAM)" +msgstr "" + +#: src/xz/message.c:1084 +msgid "" +"\n" +" Custom filter chain for compression (alternative for using presets):" +msgstr "" + +#: src/xz/message.c:1089 +msgid "" +"\n" +" --lzma1[=OPTS] LZMA1 or LZMA2; OPTS is a comma-separated list of zero or\n" +" --lzma2[=OPTS] more of the following options (valid values; default):\n" +" preset=NUM reset options to preset number NUM (0-9)\n" +" dict=NUM dictionary size (4KiB - 1536MiB; 8MiB)\n" +" lc=NUM number of literal context bits (0-4; 3)\n" +" lp=NUM number of literal position bits (0-4; 0)\n" +" pb=NUM number of position bits (0-4; 2)\n" +" mode=MODE compression mode (fast, normal; normal)\n" +" nice=NUM nice length of a match (2-273; 64)\n" +" mf=NAME match finder (hc3, hc4, bt2, bt3, bt4; bt4)\n" +" depth=NUM maximum search depth; 0=automatic (default)" +msgstr "" + +#: src/xz/message.c:1104 +msgid "" +"\n" +" --x86[=OPTS] x86 BCJ filter\n" +" --powerpc[=OPTS] PowerPC BCJ filter (big endian only)\n" +" --ia64[=OPTS] IA64 (Itanium) BCJ filter\n" +" --arm[=OPTS] ARM BCJ filter (little endian only)\n" +" --armthumb[=OPTS] ARM-Thumb BCJ filter (little endian only)\n" +" --sparc[=OPTS] SPARC BCJ filter\n" +" Valid OPTS for all BCJ filters:\n" +" start=NUM start offset for conversions (default=0)" +msgstr "" + +#: src/xz/message.c:1116 +msgid "" +"\n" +" --delta[=OPTS] Delta filter; valid OPTS (valid values; default):\n" +" dist=NUM distance between bytes being subtracted\n" +" from each other (1-256; 1)" +msgstr "" + +#: src/xz/message.c:1124 +msgid "" +"\n" +" --subblock[=OPTS] Subblock filter; valid OPTS (valid values; default):\n" +" size=NUM number of bytes of data per subblock\n" +" (1 - 256Mi; 4Ki)\n" +" rle=NUM run-length encoder chunk size (0-256; 0)" +msgstr "" + +#: src/xz/message.c:1133 +msgid "" +"\n" +" Other options:\n" +msgstr "" + +#: src/xz/message.c:1136 +msgid "" +" -q, --quiet suppress warnings; specify twice to suppress errors too\n" +" -v, --verbose be verbose; specify twice for even more verbose" +msgstr "" + +#: src/xz/message.c:1141 +msgid " -Q, --no-warn make warnings not affect the exit status" +msgstr "" + +#: src/xz/message.c:1145 +msgid "" +"\n" +" -h, --help display the short help (lists only the basic options)\n" +" -H, --long-help display this long help" +msgstr "" + +#: src/xz/message.c:1150 +msgid "" +" -h, --help display this short help\n" +" -H, --long-help display the long help (lists also the advanced options)" +msgstr "" + +#: src/xz/message.c:1154 +msgid " -V, --version display the version number" +msgstr "" + +#: src/xz/message.c:1156 +msgid "" +"\n" +"With no FILE, or when FILE is -, read standard input.\n" +msgstr "" + +#: src/xz/message.c:1160 +#, c-format +msgid "" +"On this system and configuration, this program will use at maximum of roughly\n" +"%s MiB RAM and " +msgstr "" + +#: src/xz/message.c:1162 +msgid "" +"one thread.\n" +"\n" +msgstr "" + +#: src/xz/message.c:1167 +#, c-format +msgid "Report bugs to <%s> (in English or Finnish).\n" +msgstr "" + +#: src/xz/message.c:1169 +#, c-format +msgid "%s home page: <%s>\n" +msgstr "" + +#: src/xz/options.c:88 +#, c-format +msgid "%s: Options must be `name=value' pairs separated with commas" +msgstr "" + +#: src/xz/options.c:108 +#, c-format +msgid "%s: Invalid option value" +msgstr "" + +#: src/xz/options.c:131 +#, c-format +msgid "%s: Invalid option name" +msgstr "" + +#: src/xz/options.c:310 +#, c-format +msgid "Unsupported LZMA1/LZMA2 preset: %s" +msgstr "" + +#: src/xz/options.c:429 +msgid "The sum of lc and lp must be at maximum of 4" +msgstr "" + +#: src/xz/options.c:434 +#, c-format +msgid "The selected match finder requires at least nice=%<PRIu32>" +msgstr "" + +#: src/xz/suffix.c:79 src/xz/suffix.c:164 +#, c-format +msgid "%s: With --format=raw, --suffix=.SUF is required unless writing to stdout" +msgstr "" + +#: src/xz/suffix.c:99 +#, c-format +msgid "%s: Filename has an unknown suffix, skipping" +msgstr "" + +#: src/xz/suffix.c:154 +#, c-format +msgid "%s: File already has `%s' suffix, skipping" +msgstr "" + +#: src/xz/suffix.c:205 +#, c-format +msgid "%s: Invalid filename suffix" +msgstr "" + +#: src/xz/util.c:62 +#, c-format +msgid "%s: Value is not a non-negative decimal integer" +msgstr "" + +#: src/xz/util.c:104 +#, c-format +msgid "%s: Invalid multiplier suffix. Valid suffixes:" +msgstr "" + +#: src/xz/util.c:124 +#, c-format +msgid "Value of the option `%s' must be in the range [%<PRIu64>, %<PRIu64>]" +msgstr "" + +#: src/xz/util.c:198 +msgid "Empty filename, skipping" +msgstr "" + +#: src/xz/util.c:212 +msgid "Compressed data not read from a terminal unless `--force' is used." +msgstr "" + +#: src/xz/util.c:225 +msgid "Compressed data not written to a terminal unless `--force' is used." +msgstr "" |