From a175314c3e5827eb193872241446f2f8f5c9d33c Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 4 May 2024 20:07:14 +0200 Subject: Adding upstream version 1:10.5.12. Signed-off-by: Daniel Baumann --- sql/slave.h | 308 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 308 insertions(+) create mode 100644 sql/slave.h (limited to 'sql/slave.h') diff --git a/sql/slave.h b/sql/slave.h new file mode 100644 index 00000000..5ca6054a --- /dev/null +++ b/sql/slave.h @@ -0,0 +1,308 @@ +/* Copyright (c) 2000, 2016, Oracle and/or its affiliates. + Copyright (c) 2009, 2016, MariaDB + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; version 2 of the License. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1335 USA */ + +#ifndef SLAVE_H +#define SLAVE_H + +/** + MASTER_DELAY can be at most (1 << 31) - 1. +*/ +#define MASTER_DELAY_MAX (0x7FFFFFFF) +#if INT_MAX < 0x7FFFFFFF +#error "don't support platforms where INT_MAX < 0x7FFFFFFF" +#endif + +/** + @defgroup Replication Replication + @{ + + @file +*/ + +/** + Some of defines are need in parser even though replication is not + compiled in (embedded). +*/ + +/** + The maximum is defined as (ULONG_MAX/1000) with 4 bytes ulong +*/ +#define SLAVE_MAX_HEARTBEAT_PERIOD 4294967 + +#ifdef HAVE_REPLICATION + +#include "log.h" +#include "my_list.h" +#include "rpl_filter.h" +#include "rpl_tblmap.h" +#include "rpl_gtid.h" + +#define SLAVE_NET_TIMEOUT 60 + +#define MAX_SLAVE_ERROR ER_ERROR_LAST+1 + +#define MAX_REPLICATION_THREAD 64 + +// Forward declarations +class Relay_log_info; +class Master_info; +class Master_info_index; +struct rpl_group_info; +struct rpl_parallel_thread; + +int init_intvar_from_file(int* var, IO_CACHE* f, int default_val); +int init_strvar_from_file(char *var, int max_size, IO_CACHE *f, + const char *default_val); +int init_floatvar_from_file(float* var, IO_CACHE* f, float default_val); +int init_dynarray_intvar_from_file(DYNAMIC_ARRAY* arr, IO_CACHE* f); + +/***************************************************************************** + + MySQL Replication + + Replication is implemented via two types of threads: + + I/O Thread - One of these threads is started for each master server. + They maintain a connection to their master server, read log + events from the master as they arrive, and queues them into + a single, shared relay log file. A Master_info + represents each of these threads. + + SQL Thread - One of these threads is started and reads from the relay log + file, executing each event. A Relay_log_info + represents this thread. + + Buffering in the relay log file makes it unnecessary to reread events from + a master server across a slave restart. It also decouples the slave from + the master where long-running updates and event logging are concerned--ie + it can continue to log new events while a slow query executes on the slave. + +*****************************************************************************/ + +/* + MUTEXES in replication: + + LOCK_active_mi: [note: this was originally meant for multimaster, to switch + from a master to another, to protect active_mi] It is used to SERIALIZE ALL + administrative commands of replication: START SLAVE, STOP SLAVE, CHANGE + MASTER, RESET SLAVE, end_slave() (when mysqld stops) [init_slave() does not + need it it's called early]. Any of these commands holds the mutex from the + start till the end. This thus protects us against a handful of deadlocks + (consider start_slave_thread() which, when starting the I/O thread, releases + mi->run_lock, keeps rli->run_lock, and tries to re-acquire mi->run_lock). + + Currently active_mi never moves (it's created at startup and deleted at + shutdown, and not changed: it always points to the same Master_info struct), + because we don't have multimaster. So for the moment, mi does not move, and + mi->rli does not either. + + In Master_info: run_lock, data_lock + run_lock protects all information about the run state: slave_running, thd + and the existence of the I/O thread (to stop/start it, you need this mutex). + data_lock protects some moving members of the struct: counters (log name, + position) and relay log (MYSQL_BIN_LOG object). + + In Relay_log_info: run_lock, data_lock + see Master_info + However, note that run_lock does not protect + Relay_log_info.run_state; that is protected by data_lock. + + Order of acquisition: if you want to have LOCK_active_mi and a run_lock, you + must acquire LOCK_active_mi first. + + In MYSQL_BIN_LOG: LOCK_log, LOCK_index of the binlog and the relay log + LOCK_log: when you write to it. LOCK_index: when you create/delete a binlog + (so that you have to update the .index file). +*/ + +extern ulong master_retry_count; +extern MY_BITMAP slave_error_mask; +extern char slave_skip_error_names[]; +extern bool use_slave_mask; +extern char slave_transaction_retry_error_names[]; +extern uint *slave_transaction_retry_errors; +extern uint slave_transaction_retry_error_length; +extern char *slave_load_tmpdir; +extern char *master_info_file; +extern MYSQL_PLUGIN_IMPORT char *relay_log_info_file; +extern char *opt_relay_logname, *opt_relaylog_index_name; +extern my_bool opt_skip_slave_start, opt_reckless_slave; +extern my_bool opt_log_slave_updates; +extern char *opt_slave_skip_errors; +extern char *opt_slave_transaction_retry_errors; +extern my_bool opt_replicate_annotate_row_events; +extern ulonglong relay_log_space_limit; +extern ulonglong opt_read_binlog_speed_limit; +extern ulonglong slave_skipped_errors; +extern const char *relay_log_index; +extern const char *relay_log_basename; + +/* + 4 possible values for Master_info::slave_running and + Relay_log_info::slave_running. + The values 0,1,2,3 are very important: to keep the diff small, I didn't + substitute places where we use 0/1 with the newly defined symbols. + So don't change these values. + The same way, code is assuming that in Relay_log_info we use only values + 0/1. + I started with using an enum, but + enum_variable=1; is not legal so would have required many line changes. +*/ +#define MYSQL_SLAVE_NOT_RUN 0 +#define MYSQL_SLAVE_RUN_NOT_CONNECT 1 +#define MYSQL_SLAVE_RUN_CONNECT 2 +#define MYSQL_SLAVE_RUN_READING 3 + +#define RPL_LOG_NAME (rli->group_master_log_name[0] ? rli->group_master_log_name :\ + "FIRST") +#define IO_RPL_LOG_NAME (mi->master_log_name[0] ? mi->master_log_name :\ + "FIRST") + +/* + If the following is set, if first gives an error, second will be + tried. Otherwise, if first fails, we fail. +*/ +#define SLAVE_FORCE_ALL 4 + +/* + Values for the option --replicate-events-marked-for-skip. + Must match the names in replicate_events_marked_for_skip_names in sys_vars.cc +*/ +#define RPL_SKIP_REPLICATE 0 +#define RPL_SKIP_FILTER_ON_SLAVE 1 +#define RPL_SKIP_FILTER_ON_MASTER 2 + + +int init_slave(); +int init_recovery(Master_info* mi, const char** errmsg); +bool init_slave_skip_errors(const char* arg); +bool init_slave_transaction_retry_errors(const char* arg); +int register_slave_on_master(MYSQL* mysql); +int terminate_slave_threads(Master_info* mi, int thread_mask, + bool skip_lock = 0); +int start_slave_threads(THD *thd, + bool need_slave_mutex, bool wait_for_start, + Master_info* mi, const char* master_info_fname, + const char* slave_info_fname, int thread_mask); +/* + cond_lock is usually same as start_lock. It is needed for the case when + start_lock is 0 which happens if start_slave_thread() is called already + inside the start_lock section, but at the same time we want a + mysql_cond_wait() on start_cond, start_lock +*/ +int start_slave_thread( +#ifdef HAVE_PSI_INTERFACE + PSI_thread_key thread_key, +#endif + pthread_handler h_func, + mysql_mutex_t *start_lock, + mysql_mutex_t *cond_lock, + mysql_cond_t *start_cond, + volatile uint *slave_running, + volatile ulong *slave_run_id, + Master_info *mi); + +/* If fd is -1, dump to NET */ +int mysql_table_dump(THD* thd, const char* db, + const char* tbl_name, int fd = -1); + +/* retrieve table from master and copy to slave*/ +int fetch_master_table(THD* thd, const char* db_name, const char* table_name, + Master_info* mi, MYSQL* mysql, bool overwrite); + +void show_master_info_get_fields(THD *thd, List *field_list, + bool full, size_t gtid_pos_length); +bool show_master_info(THD* thd, Master_info* mi, bool full); +bool show_all_master_info(THD* thd); +void show_binlog_info_get_fields(THD *thd, List *field_list); +bool show_binlog_info(THD* thd); +bool rpl_master_has_bug(const Relay_log_info *rli, uint bug_id, bool report, + bool (*pred)(const void *), const void *param); +bool rpl_master_erroneous_autoinc(THD* thd); + +const char *print_slave_db_safe(const char *db); +void skip_load_data_infile(NET* net); + +void slave_prepare_for_shutdown(); +void end_slave(); /* release slave threads */ +void close_active_mi(); /* clean up slave threads data */ +void clear_until_condition(Relay_log_info* rli); +void clear_slave_error(Relay_log_info* rli); +void end_relay_log_info(Relay_log_info* rli); +void init_thread_mask(int* mask,Master_info* mi,bool inverse); +Format_description_log_event * +read_relay_log_description_event(IO_CACHE *cur_log, ulonglong start_pos, + const char **errmsg); + +int init_relay_log_pos(Relay_log_info* rli,const char* log,ulonglong pos, + bool need_data_lock, const char** errmsg, + bool look_for_description_event); + +int purge_relay_logs(Relay_log_info* rli, THD *thd, bool just_reset, + const char** errmsg); +void set_slave_thread_options(THD* thd); +void set_slave_thread_default_charset(THD *thd, rpl_group_info *rgi); +int rotate_relay_log(Master_info* mi); +int has_temporary_error(THD *thd); +int sql_delay_event(Log_event *ev, THD *thd, rpl_group_info *rgi); +int apply_event_and_update_pos(Log_event* ev, THD* thd, + struct rpl_group_info *rgi); +int apply_event_and_update_pos_for_parallel(Log_event* ev, THD* thd, + struct rpl_group_info *rgi); + +int init_intvar_from_file(int* var, IO_CACHE* f, int default_val); +int init_floatvar_from_file(float* var, IO_CACHE* f, float default_val); +int init_strvar_from_file(char *var, int max_size, IO_CACHE *f, + const char *default_val); +int init_dynarray_intvar_from_file(DYNAMIC_ARRAY* arr, IO_CACHE* f); + +pthread_handler_t handle_slave_io(void *arg); +void slave_output_error_info(rpl_group_info *rgi, THD *thd); +pthread_handler_t handle_slave_sql(void *arg); +bool net_request_file(NET* net, const char* fname); +void slave_background_kill_request(THD *to_kill); +void slave_background_gtid_pos_create_request + (rpl_slave_state::gtid_pos_table *table_entry); +void slave_background_gtid_pending_delete_request(void); + +extern Master_info *active_mi; /* active_mi for multi-master */ +extern Master_info *default_master_info; /* To replace active_mi */ +extern Master_info_index *master_info_index; +extern LEX_CSTRING default_master_connection_name; +extern my_bool replicate_same_server_id; + +extern int disconnect_slave_event_count, abort_slave_event_count ; + +/* the master variables are defaults read from my.cnf or command line */ +extern uint report_port; +extern char *master_info_file, *report_user; +extern char *report_host, *report_password; + +extern I_List threads; + +#else +#define close_active_mi() /* no-op */ +#endif /* HAVE_REPLICATION */ + +/* masks for start/stop operations on io and sql slave threads */ +#define SLAVE_IO 1 +#define SLAVE_SQL 2 + +/** + @} (end of group Replication) +*/ + +#endif -- cgit v1.2.3