diff options
Diffstat (limited to '')
| -rw-r--r-- | sql/rpl_rli.h | 1054 |
1 files changed, 1054 insertions, 0 deletions
diff --git a/sql/rpl_rli.h b/sql/rpl_rli.h new file mode 100644 index 00000000..0fd90704 --- /dev/null +++ b/sql/rpl_rli.h @@ -0,0 +1,1054 @@ +/* Copyright (c) 2005, 2017, Oracle and/or its affiliates. + Copyright (c) 2009, 2017, MariaDB Corporation + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; version 2 of the License. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1335 USA */ + +#ifndef RPL_RLI_H +#define RPL_RLI_H + +#include "rpl_tblmap.h" +#include "rpl_reporting.h" +#include "rpl_utility.h" +#include "log.h" /* LOG_INFO, MYSQL_BIN_LOG */ +#include "sql_class.h" /* THD */ +#include "log_event.h" +#include "rpl_parallel.h" + +struct RPL_TABLE_LIST; +class Master_info; +class Rpl_filter; + + +/**************************************************************************** + + Replication SQL Thread + + Relay_log_info contains: + - the current relay log + - the current relay log offset + - master log name + - master log sequence corresponding to the last update + - misc information specific to the SQL thread + + Relay_log_info is initialized from the slave.info file if such + exists. Otherwise, data members are intialized with defaults. The + initialization is done with Relay_log_info::init() call. + + The format of slave.info file: + + relay_log_name + relay_log_pos + master_log_name + master_log_pos + + To clean up, call end_relay_log_info() + +*****************************************************************************/ + +struct rpl_group_info; +struct inuse_relaylog; + +class Relay_log_info : public Slave_reporting_capability +{ +public: + /** + Flags for the state of reading the relay log. Note that these are + bit masks. + */ + enum enum_state_flag { + /** We are inside a group of events forming a statement */ + IN_STMT=1, + /** We have inside a transaction */ + IN_TRANSACTION=2 + }; + + /* + The SQL thread owns one Relay_log_info, and each client that has + executed a BINLOG statement owns one Relay_log_info. This function + returns zero for the Relay_log_info object that belongs to the SQL + thread and nonzero for Relay_log_info objects that belong to + clients. + */ + inline bool belongs_to_client() + { + DBUG_ASSERT(sql_driver_thd); + return !sql_driver_thd->slave_thread; + } + + /* + If true, events with the same server id should be replicated. This + field is set on creation of a relay log info structure by copying + the value of ::replicate_same_server_id and can be overridden if + necessary. For example of when this is done, check sql_binlog.cc, + where the BINLOG statement can be used to execute "raw" events. + */ + bool replicate_same_server_id; + + /*** The following variables can only be read when protect by data lock ****/ + + /* + info_fd - file descriptor of the info file. set only during + initialization or clean up - safe to read anytime + cur_log_fd - file descriptor of the current read relay log + */ + File info_fd,cur_log_fd; + + /* + Protected with internal locks. + Must get data_lock when resetting the logs. + */ + MYSQL_BIN_LOG relay_log; + LOG_INFO linfo; + + /* + cur_log + Pointer that either points at relay_log.get_log_file() or + &rli->cache_buf, depending on whether the log is hot or there was + the need to open a cold relay_log. + + cache_buf + IO_CACHE used when opening cold relay logs. + */ + IO_CACHE cache_buf,*cur_log; + + /* + Keeps track of the number of transactions that commits + before fsyncing. The option --sync-relay-log-info determines + how many transactions should commit before fsyncing. + */ + uint sync_counter; + + /* + Identifies when the recovery process is going on. + See sql/slave.cc:init_recovery for further details. + */ + bool is_relay_log_recovery; + + /* The following variables are safe to read any time */ + + /* IO_CACHE of the info file - set only during init or end */ + IO_CACHE info_file; + + /* + List of temporary tables used by this connection. + This is updated when a temporary table is created or dropped by + a replication thread. + + Not reset when replication ends, to allow one to access the tables + when replication restarts. + + Protected by data_lock. + */ + All_tmp_tables_list *save_temporary_tables; + + /* + standard lock acquisition order to avoid deadlocks: + run_lock, data_lock, relay_log.LOCK_log, relay_log.LOCK_index + */ + mysql_mutex_t data_lock, run_lock; + /* + start_cond is broadcast when SQL thread is started + stop_cond - when stopped + data_cond - when data protected by data_lock changes + */ + mysql_cond_t start_cond, stop_cond, data_cond; + /* parent Master_info structure */ + Master_info *mi; + + /* + List of active relay log files. + (This can be more than one in case of parallel replication). + */ + inuse_relaylog *inuse_relaylog_list; + inuse_relaylog *last_inuse_relaylog; + + /* + Needed to deal properly with cur_log getting closed and re-opened with + a different log under our feet + */ + uint32 cur_log_old_open_count; + + /* + If on init_info() call error_on_rli_init_info is true that means + that previous call to init_info() terminated with an error, RESET + SLAVE must be executed and the problem fixed manually. + */ + bool error_on_rli_init_info; + + /* + Let's call a group (of events) : + - a transaction + or + - an autocommiting query + its associated events (INSERT_ID, + TIMESTAMP...) + We need these rli coordinates : + - relay log name and position of the beginning of the group we currently + are executing. Needed to know where we have to restart when replication has + stopped in the middle of a group (which has been rolled back by the slave). + - relay log name and position just after the event we have just + executed. This event is part of the current group. + Formerly we only had the immediately above coordinates, plus a 'pending' + variable, but this dealt wrong with the case of a transaction starting on a + relay log and finishing (commiting) on another relay log. Case which can + happen when, for example, the relay log gets rotated because of + max_binlog_size. + + Note: group_relay_log_name, group_relay_log_pos must only be + written from the thread owning the Relay_log_info (SQL thread if + !belongs_to_client(); client thread executing BINLOG statement if + belongs_to_client()). + */ + char group_relay_log_name[FN_REFLEN]; + ulonglong group_relay_log_pos; + char event_relay_log_name[FN_REFLEN]; + ulonglong event_relay_log_pos; + ulonglong future_event_relay_log_pos; + /* + The master log name for current event. Only used in parallel replication. + */ + char future_event_master_log_name[FN_REFLEN]; + + /* + Original log name and position of the group we're currently executing + (whose coordinates are group_relay_log_name/pos in the relay log) + in the master's binlog. These concern the *group*, because in the master's + binlog the log_pos that comes with each event is the position of the + beginning of the group. + + Note: group_master_log_name, group_master_log_pos must only be + written from the thread owning the Relay_log_info (SQL thread if + !belongs_to_client(); client thread executing BINLOG statement if + belongs_to_client()). + */ + char group_master_log_name[FN_REFLEN]; + volatile my_off_t group_master_log_pos; + + /* + Handling of the relay_log_space_limit optional constraint. + ignore_log_space_limit is used to resolve a deadlock between I/O and SQL + threads, the SQL thread sets it to unblock the I/O thread and make it + temporarily forget about the constraint. + */ + ulonglong log_space_limit; + Atomic_counter<uint64> log_space_total; + bool ignore_log_space_limit; + + /* + Used by the SQL thread to instructs the IO thread to rotate + the logs when the SQL thread needs to purge to release some + disk space. + */ + bool sql_force_rotate_relay; + + time_t last_master_timestamp; + /* + The SQL driver thread sets this true while it is waiting at the end of the + relay log for more events to arrive. SHOW SLAVE STATUS uses this to report + Seconds_Behind_Master as zero while the SQL thread is so waiting. + */ + bool sql_thread_caught_up; + + void clear_until_condition(); + /** + Reset the delay. + This is used by RESET SLAVE to clear the delay. + */ + void clear_sql_delay() + { + sql_delay= 0; + } + + + /* + Needed for problems when slave stops and we want to restart it + skipping one or more events in the master log that have caused + errors, and have been manually applied by DBA already. + Must be ulong as it's referred to from set_var.cc + */ + volatile ulonglong slave_skip_counter; + ulonglong max_relay_log_size; + + volatile ulong abort_pos_wait; /* Incremented on change master */ + volatile ulong slave_run_id; /* Incremented on slave start */ + mysql_mutex_t log_space_lock; + mysql_cond_t log_space_cond; + /* + THD for the main sql thread, the one that starts threads to process + slave requests. If there is only one thread, then this THD is also + used for SQL processing. + A kill sent to this THD will kill the replication. + */ + THD *sql_driver_thd; +#ifndef DBUG_OFF + int events_till_abort; +#endif + + enum_gtid_skip_type gtid_skip_flag; + + /* + inited changes its value within LOCK_active_mi-guarded critical + sections at times of start_slave_threads() (0->1) and end_slave() (1->0). + Readers may not acquire the mutex while they realize potential concurrency + issue. + If not set, the value of other members of the structure are undefined. + */ + volatile bool inited; + volatile bool abort_slave; + volatile bool stop_for_until; + volatile uint slave_running; + + /* + Condition and its parameters from START SLAVE UNTIL clause. + + UNTIL condition is tested with is_until_satisfied() method that is + called by exec_relay_log_event(). is_until_satisfied() caches the result + of the comparison of log names because log names don't change very often; + this cache is invalidated by parts of code which change log names with + notify_*_log_name_updated() methods. (They need to be called only if SQL + thread is running). + */ + + enum { + UNTIL_NONE= 0, UNTIL_MASTER_POS, UNTIL_RELAY_POS, UNTIL_GTID + } until_condition; + char until_log_name[FN_REFLEN]; + ulonglong until_log_pos; + /* extension extracted from log_name and converted to int */ + ulong until_log_name_extension; + /* + Cached result of comparison of until_log_name and current log name + -2 means unitialised, -1,0,1 are comarison results + */ + enum + { + UNTIL_LOG_NAMES_CMP_UNKNOWN= -2, UNTIL_LOG_NAMES_CMP_LESS= -1, + UNTIL_LOG_NAMES_CMP_EQUAL= 0, UNTIL_LOG_NAMES_CMP_GREATER= 1 + } until_log_names_cmp_result; + /* Condition for UNTIL master_gtid_pos. */ + slave_connection_state until_gtid_pos; + + /* + retried_trans is a cumulative counter: how many times the slave + has retried a transaction (any) since slave started. + Protected by data_lock. + */ + ulong retried_trans; + /* + Number of executed events for SLAVE STATUS. + Protected by slave_executed_entries_lock + */ + Atomic_counter<uint32_t> executed_entries; + + /* + If the end of the hot relay log is made of master's events ignored by the + slave I/O thread, these two keep track of the coords (in the master's + binlog) of the last of these events seen by the slave I/O thread. If not, + ign_master_log_name_end[0] == 0. + As they are like a Rotate event read/written from/to the relay log, they + are both protected by rli->relay_log.LOCK_log. + */ + char ign_master_log_name_end[FN_REFLEN]; + ulonglong ign_master_log_pos_end; + /* Similar for ignored GTID events. */ + slave_connection_state ign_gtids; + + /* + Indentifies where the SQL Thread should create temporary files for the + LOAD DATA INFILE. This is used for security reasons. + */ + char slave_patternload_file[FN_REFLEN]; + size_t slave_patternload_file_size; + + rpl_parallel parallel; + /* + The relay_log_state keeps track of the current binlog state of the + execution of the relay log. This is used to know where to resume + current GTID position if the slave thread is stopped and + restarted. It is only accessed from the SQL thread, so it does + not need any locking. + */ + rpl_binlog_state relay_log_state; + /* + The restart_gtid_state is used when the SQL thread restarts on a relay log + in GTID mode. In multi-domain parallel replication, each domain may have a + separat position, so some events in more progressed domains may need to be + skipped. This keeps track of the domains that have not yet reached their + starting event. + */ + slave_connection_state restart_gtid_pos; + + Relay_log_info(bool is_slave_recovery, const char* thread_name= "SQL"); + ~Relay_log_info(); + + /* + Invalidate cached until_log_name and group_relay_log_name comparison + result. Should be called after any update of group_realy_log_name if + there chances that sql_thread is running. + */ + inline void notify_group_relay_log_name_update() + { + if (until_condition==UNTIL_RELAY_POS) + until_log_names_cmp_result= UNTIL_LOG_NAMES_CMP_UNKNOWN; + } + + /* + The same as previous but for group_master_log_name. + */ + inline void notify_group_master_log_name_update() + { + if (until_condition==UNTIL_MASTER_POS) + until_log_names_cmp_result= UNTIL_LOG_NAMES_CMP_UNKNOWN; + } + + void inc_group_relay_log_pos(ulonglong log_pos, + rpl_group_info *rgi, + bool skip_lock=0); + + int wait_for_pos(THD* thd, String* log_name, longlong log_pos, + longlong timeout); + void close_temporary_tables(); + + /* Check if UNTIL condition is satisfied. See slave.cc for more. */ + bool is_until_satisfied(Log_event *ev); + inline ulonglong until_pos() + { + DBUG_ASSERT(until_condition == UNTIL_MASTER_POS || + until_condition == UNTIL_RELAY_POS); + return ((until_condition == UNTIL_MASTER_POS) ? group_master_log_pos : + group_relay_log_pos); + } + inline char *until_name() + { + DBUG_ASSERT(until_condition == UNTIL_MASTER_POS || + until_condition == UNTIL_RELAY_POS); + return ((until_condition == UNTIL_MASTER_POS) ? group_master_log_name : + group_relay_log_name); + } + /** + Helper function to do after statement completion. + + This function is called from an event to complete the group by + either stepping the group position, if the "statement" is not + inside a transaction; or increase the event position, if the + "statement" is inside a transaction. + + @param event_log_pos + Master log position of the event. The position is recorded in the + relay log info and used to produce information for <code>SHOW + SLAVE STATUS</code>. + */ + bool stmt_done(my_off_t event_log_pos, THD *thd, rpl_group_info *rgi); + int alloc_inuse_relaylog(const char *name); + void free_inuse_relaylog(inuse_relaylog *ir); + void reset_inuse_relaylog(); + int update_relay_log_state(rpl_gtid *gtid_list, uint32 count); + + /** + Is the replication inside a group? + + The reader of the relay log is inside a group if either: + - The IN_TRANSACTION flag is set, meaning we're inside a transaction + - The IN_STMT flag is set, meaning we have read at least one row from + a multi-event entry. + + This flag reflects the state of the log 'just now', ie after the last + read event would be executed. + This allow us to test if we can stop replication before reading + the next entry. + + @retval true Replication thread is currently inside a group + @retval false Replication thread is currently not inside a group + */ + bool is_in_group() const { + return (m_flags & (IN_STMT | IN_TRANSACTION)); + } + + /** + Set the value of a replication state flag. + + @param flag Flag to set + */ + void set_flag(enum_state_flag flag) + { + m_flags|= flag; + } + + /** + Get the value of a replication state flag. + + @param flag Flag to get value of + + @return @c true if the flag was set, @c false otherwise. + */ + bool get_flag(enum_state_flag flag) + { + return m_flags & flag; + } + + /** + Clear the value of a replication state flag. + + @param flag Flag to clear + */ + void clear_flag(enum_state_flag flag) + { + m_flags&= ~flag; + } + + /** + Text used in THD::proc_info when the slave SQL thread is delaying. + */ + static const char *const state_delaying_string; + + bool flush(); + + /** + Reads the relay_log.info file. + */ + int init(const char* info_filename); + + /** + Indicate that a delay starts. + + This does not actually sleep; it only sets the state of this + Relay_log_info object to delaying so that the correct state can be + reported by SHOW SLAVE STATUS and SHOW PROCESSLIST. + + Requires rli->data_lock. + + @param delay_end The time when the delay shall end. + */ + void start_sql_delay(time_t delay_end) + { + mysql_mutex_assert_owner(&data_lock); + sql_delay_end= delay_end; + thd_proc_info(sql_driver_thd, state_delaying_string); + } + + int32 get_sql_delay() { return sql_delay; } + void set_sql_delay(int32 _sql_delay) { sql_delay= _sql_delay; } + time_t get_sql_delay_end() { return sql_delay_end; } + rpl_gtid last_seen_gtid; + ulong last_trans_retry_count; +private: + + + /** + Delay slave SQL thread by this amount, compared to master (in + seconds). This is set with CHANGE MASTER TO MASTER_DELAY=X. + + Guarded by data_lock. Initialized by the client thread executing + START SLAVE. Written by client threads executing CHANGE MASTER TO + MASTER_DELAY=X. Read by SQL thread and by client threads + executing SHOW SLAVE STATUS. Note: must not be written while the + slave SQL thread is running, since the SQL thread reads it without + a lock when executing Relay_log_info::flush(). + */ + int sql_delay; + + /** + During a delay, specifies the point in time when the delay ends. + + This is used for the SQL_Remaining_Delay column in SHOW SLAVE STATUS. + + Guarded by data_lock. Written by the sql thread. Read by client + threads executing SHOW SLAVE STATUS. + */ + time_t sql_delay_end; + + /* + Before the MASTER_DELAY parameter was added (WL#344), + relay_log.info had 4 lines. Now it has 5 lines. + */ + static const int LINES_IN_RELAY_LOG_INFO_WITH_DELAY= 5; + /* + Hint for when to stop event distribution by sql driver thread. + The flag is set ON by a non-group event when this event is in the middle + of a group (e.g a transaction group) so it's too early + to refresh the current-relay-log vs until-log cached comparison result. + And it is checked and to decide whether it's a right time to do so + when the being processed group has been fully scheduled. + */ + bool until_relay_log_names_defer; + + /* + Holds the state of the data in the relay log. + We need this to ensure that we are not in the middle of a + statement or inside BEGIN ... COMMIT when should rotate the + relay log. + */ + uint32 m_flags; +}; + + +/* + In parallel replication, if we need to re-try a transaction due to a + deadlock or other temporary error, we may need to go back and re-read events + out of an earlier relay log. + + This structure keeps track of the relaylogs that are potentially in use. + Each rpl_group_info has a pointer to one of those, corresponding to the + first GTID event. + + A pair of reference count keeps track of how long a relay log is potentially + in use. When the `completed' flag is set, all events have been read out of + the relay log, but the log might still be needed for retry in worker + threads. As worker threads complete an event group, they increment + atomically the `dequeued_count' with number of events queued. Thus, when + completed is set and dequeued_count equals queued_count, the relay log file + is finally done with and can be purged. + + By separating the queued and dequeued count, only the dequeued_count needs + multi-thread synchronisation; the completed flag and queued_count fields + are only accessed by the SQL driver thread and need no synchronisation. +*/ +struct inuse_relaylog { + inuse_relaylog *next; + Relay_log_info *rli; + /* + relay_log_state holds the binlog state corresponding to the start of this + relay log file. It is an array with relay_log_state_count elements. + */ + rpl_gtid *relay_log_state; + uint32 relay_log_state_count; + /* Number of events in this relay log queued for worker threads. */ + int64 queued_count; + /* Number of events completed by worker threads. */ + Atomic_counter<int64> dequeued_count; + /* Set when all events have been read from a relaylog. */ + bool completed; + char name[FN_REFLEN]; + + inuse_relaylog(Relay_log_info *rli_arg, rpl_gtid *relay_log_state_arg, + uint32 relay_log_state_count_arg, + const char *name_arg): + next(0), rli(rli_arg), relay_log_state(relay_log_state_arg), + relay_log_state_count(relay_log_state_count_arg), queued_count(0), + dequeued_count(0), completed(false) + { + strmake_buf(name, name_arg); + } +}; + +enum start_alter_state +{ + INVALID= 0, + REGISTERED, // Start Alter exist, Default state + COMMIT_ALTER, // COMMIT the alter + ROLLBACK_ALTER, // Rollback the alter + COMPLETED // COMMIT/ROLLBACK Alter written in binlog +}; + +struct start_alter_info +{ + /* + ALTER id is defined as a pair of GTID's seq_no and domain_id. + */ + decltype(rpl_gtid::seq_no) sa_seq_no; // key for searching (SA's id) + uint32 domain_id; + bool direct_commit_alter; // when true CA thread executes the whole query + /* + 0 prepared and not error from commit and rollback + >0 error expected in commit/rollback + Rollback can be logged with 0 error if master is killed + */ + uint error; + enum start_alter_state state; + /* We are not using mysql_cond_t because we do not need PSI */ + mysql_cond_t start_alter_cond; +}; + +/* + This is data for various state needed to be kept for the processing of + one event group (transaction) during replication. + + In single-threaded replication, there will be one global rpl_group_info and + one global Relay_log_info per master connection. They will be linked + together. + + In parallel replication, there will be one rpl_group_info object for + each running sql thread, each having their own thd. + + All rpl_group_info will share the same Relay_log_info. +*/ + +struct rpl_group_info +{ + rpl_group_info *next; /* For free list in rpl_parallel_thread */ + Relay_log_info *rli; + THD *thd; + /* + Current GTID being processed. + The sub_id gives the binlog order within one domain_id. A zero sub_id + means that there is no active GTID. + */ + uint64 gtid_sub_id; + rpl_gtid current_gtid; + /* Currently applied event or NULL */ + Log_event *current_event; + uint64 commit_id; + /* + This is used to keep transaction commit order. + We will signal this when we commit, and can register it to wait for the + commit_orderer of the previous commit to signal us. + */ + wait_for_commit commit_orderer; + /* + If non-zero, the sub_id of a prior event group whose commit we have to wait + for before committing ourselves. Then wait_commit_group_info points to the + event group to wait for. + + Before using this, rpl_parallel_entry::last_committed_sub_id should be + compared against wait_commit_sub_id. Only if last_committed_sub_id is + smaller than wait_commit_sub_id must the wait be done (otherwise the + waited-for transaction is already committed, so we would otherwise wait + for the wrong commit). + */ + uint64 wait_commit_sub_id; + rpl_group_info *wait_commit_group_info; + /* + This holds a pointer to a struct that keeps track of the need to wait + for the previous batch of event groups to reach the commit stage, before + this batch can start to execute. + + (When we execute in parallel the transactions that group committed + together on the master, we still need to wait for any prior transactions + to have reached the commit stage). + + The pointed-to gco is only valid for as long as + gtid_sub_id < parallel_entry->last_committed_sub_id. After that, it can + be freed by another thread. + */ + group_commit_orderer *gco; + + struct rpl_parallel_entry *parallel_entry; + + /* + A container to hold on Intvar-, Rand-, Uservar- log-events in case + the slave is configured with table filtering rules. + The withhold events are executed when their parent Query destiny is + determined for execution as well. + */ + Deferred_log_events *deferred_events; + + /* + State of the container: true stands for IRU events gathering, + false does for execution, either deferred or direct. + */ + bool deferred_events_collecting; + + Annotate_rows_log_event *m_annotate_event; + + RPL_TABLE_LIST *tables_to_lock; /* RBR: Tables to lock */ + uint tables_to_lock_count; /* RBR: Count of tables to lock */ + table_mapping m_table_map; /* RBR: Mapping table-id to table */ + mysql_mutex_t sleep_lock; + mysql_cond_t sleep_cond; + + /* + trans_retries varies between 0 to slave_transaction_retries and counts how + many times the slave has retried the present transaction; gets reset to 0 + when the transaction finally succeeds. + */ + ulong trans_retries; + + /* + Used to defer stopping the SQL thread to give it a chance + to finish up the current group of events. + The timestamp is set and reset in @c sql_slave_killed(). + */ + time_t last_event_start_time; + + char *event_relay_log_name; + char event_relay_log_name_buf[FN_REFLEN]; + ulonglong event_relay_log_pos; + ulonglong future_event_relay_log_pos; + /* + The master log name for current event. Only used in parallel replication. + */ + char future_event_master_log_name[FN_REFLEN]; + bool is_parallel_exec; + /* When gtid_pending is true, we have not yet done record_gtid(). */ + bool gtid_pending; + int worker_error; + /* + Set true when we signalled that we reach the commit phase. Used to avoid + counting one event group twice. + */ + bool did_mark_start_commit; + /* Copy of flags2 from GTID event. */ + uchar gtid_ev_flags2; + /* Copy of flags3 from GTID event. */ + uint16 gtid_ev_flags_extra; + uint64 gtid_ev_sa_seq_no; + enum { + GTID_DUPLICATE_NULL=0, + GTID_DUPLICATE_IGNORE=1, + GTID_DUPLICATE_OWNER=2 + }; + /* + When --gtid-ignore-duplicates, this is set to one of the above three + values: + GTID_DUPLICATE_NULL - Not using --gtid-ignore-duplicates. + GTID_DUPLICATE_IGNORE - This gtid already applied, skip the event group. + GTID_DUPLICATE_OWNER - We are the current owner of the domain, and must + apply the event group and then release the domain. + */ + uint8 gtid_ignore_duplicate_state; + + /* + Runtime state for printing a note when slave is taking + too long while processing a row event. + */ + longlong row_stmt_start_timestamp; + bool long_find_row_note_printed; + /* Needs room for "Gtid D-S-N\x00". */ + char gtid_info_buf[5+10+1+10+1+20+1]; + + /* + The timestamp, from the master, of the commit event. + Used to do delayed update of rli->last_master_timestamp, for getting + reasonable values out of Seconds_Behind_Master in SHOW SLAVE STATUS. + */ + time_t last_master_timestamp; + + /* + Information to be able to re-try an event group in case of a deadlock or + other temporary error. + */ + inuse_relaylog *relay_log; + uint64 retry_start_offset; + uint64 retry_event_count; + /* + If `speculation' is != SPECULATE_NO, then we are optimistically running + this transaction in parallel, even though it might not be safe (there may + be a conflict with a prior event group). + + In this case, a conflict can cause other errors than deadlocks (like + duplicate key for example). So in case of _any_ error, we need to roll + back and retry the event group. + */ + enum enum_speculation { + /* + This transaction was group-committed together on the master with the + other transactions with which it is replicated in parallel. + */ + SPECULATE_NO, + /* + We will optimistically try to run this transaction in parallel with + other transactions, even though it is not known to be conflict free. + If we get a conflict, we will detect it as a deadlock, roll back and + retry. + */ + SPECULATE_OPTIMISTIC, + /* + This transaction got a conflict during speculative parallel apply, or + it was marked on the master as likely to cause a conflict or unsafe to + speculate. So it will wait for the prior transaction to commit before + starting to replicate. + */ + SPECULATE_WAIT + } speculation; + enum enum_retry_killed { + RETRY_KILL_NONE = 0, + RETRY_KILL_PENDING, + RETRY_KILL_KILLED + }; + uchar killed_for_retry; + bool reserved_start_alter_thread; + bool finish_event_group_called; + /* + Used for two phase alter table + */ + rpl_parallel_thread *rpt; + Query_log_event *start_alter_ev; + bool direct_commit_alter; + start_alter_info *sa_info; + + rpl_group_info(Relay_log_info *rli_); + ~rpl_group_info(); + void reinit(Relay_log_info *rli); + + /* + Returns true if the argument event resides in the containter; + more specifically, the checking is done against the last added event. + */ + bool is_deferred_event(Log_event * ev) + { + return deferred_events_collecting ? deferred_events->is_last(ev) : false; + }; + /* The general cleanup that slave applier may need at the end of query. */ + inline void cleanup_after_query() + { + if (deferred_events) + deferred_events->rewind(); + }; + /* The general cleanup that slave applier may need at the end of session. */ + void cleanup_after_session() + { + if (deferred_events) + { + delete deferred_events; + deferred_events= NULL; + } + }; + + /** + Save pointer to Annotate_rows event and switch on the + binlog_annotate_row_events for this sql thread. + To be called when sql thread receives an Annotate_rows event. + */ + inline void set_annotate_event(Annotate_rows_log_event *event) + { + DBUG_ASSERT(m_annotate_event == NULL); + m_annotate_event= event; + this->thd->variables.binlog_annotate_row_events= 1; + } + + /** + Returns pointer to the saved Annotate_rows event or NULL if there is + no saved event. + */ + inline Annotate_rows_log_event* get_annotate_event() + { + return m_annotate_event; + } + + /** + Delete saved Annotate_rows event (if any) and switch off the + binlog_annotate_row_events for this sql thread. + To be called when sql thread has applied the last (i.e. with + STMT_END_F flag) rbr event. + */ + inline void free_annotate_event() + { + if (m_annotate_event) + { + this->thd->variables.binlog_annotate_row_events= 0; + delete m_annotate_event; + m_annotate_event= 0; + } + } + + bool get_table_data(TABLE *table_arg, table_def **tabledef_var, TABLE **conv_table_var) const + { + DBUG_ASSERT(tabledef_var && conv_table_var); + for (TABLE_LIST *ptr= tables_to_lock ; ptr != NULL ; ptr= ptr->next_global) + if (ptr->table == table_arg) + { + *tabledef_var= &static_cast<RPL_TABLE_LIST*>(ptr)->m_tabledef; + *conv_table_var= static_cast<RPL_TABLE_LIST*>(ptr)->m_conv_table; + DBUG_PRINT("debug", ("Fetching table data for table %s.%s:" + " tabledef: %p, conv_table: %p", + table_arg->s->db.str, table_arg->s->table_name.str, + *tabledef_var, *conv_table_var)); + return true; + } + return false; + } + + void clear_tables_to_lock(); + void cleanup_context(THD *, bool); + void slave_close_thread_tables(THD *); + void mark_start_commit_no_lock(); + void mark_start_commit(); + char *gtid_info(); + void unmark_start_commit(); + + longlong get_row_stmt_start_timestamp() + { + return row_stmt_start_timestamp; + } + + void set_row_stmt_start_timestamp() + { + if (row_stmt_start_timestamp == 0) + row_stmt_start_timestamp= microsecond_interval_timer(); + } + + void reset_row_stmt_start_timestamp() + { + row_stmt_start_timestamp= 0; + } + + void set_long_find_row_note_printed() + { + long_find_row_note_printed= true; + } + + void unset_long_find_row_note_printed() + { + long_find_row_note_printed= false; + } + + bool is_long_find_row_note_printed() + { + return long_find_row_note_printed; + } + + inline void inc_event_relay_log_pos() + { + if (!is_parallel_exec) + rli->event_relay_log_pos= future_event_relay_log_pos; + } + + void finish_start_alter_event_group(); + + bool get_finish_event_group_called() + { + return finish_event_group_called; + } + + void set_finish_event_group_called(bool value) + { + finish_event_group_called= value; + } + +}; + + +/* + The class rpl_sql_thread_info is the THD::system_thread_info for an SQL + thread; this is either the driver SQL thread or a worker thread for parallel + replication. +*/ +class rpl_sql_thread_info +{ +public: + char cached_charset[6]; + Rpl_filter* rpl_filter; + + rpl_sql_thread_info(Rpl_filter *filter); + + /* + Last charset (6 bytes) seen by slave SQL thread is cached here; it helps + the thread save 3 get_charset() per Query_log_event if the charset is not + changing from event to event (common situation). + When the 6 bytes are equal to 0 is used to mean "cache is invalidated". + */ + void cached_charset_invalidate(); + bool cached_charset_compare(char *charset) const; +}; + + +extern struct rpl_slave_state *rpl_global_gtid_slave_state; +extern gtid_waiting rpl_global_gtid_waiting; + +int rpl_load_gtid_slave_state(THD *thd); +int find_gtid_slave_pos_tables(THD *thd); +int event_group_new_gtid(rpl_group_info *rgi, Gtid_log_event *gev); +void delete_or_keep_event_post_apply(rpl_group_info *rgi, + Log_event_type typ, Log_event *ev); + +#endif /* RPL_RLI_H */ |