# Makefile.in generated by automake 1.16.5 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2021 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # --------------------------------------------------------------------------- # Licensed to the Apache Software Foundation (ASF) under one or more # contributor license agreements. See the NOTICE file distributed with # this work for additional information regarding copyright ownership. # The ASF licenses this file to You under the Apache License, Version 2.0 # (the "License"); you may not use this file except in compliance with # the License. You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # --------------------------------------------------------------------------- # Copyright (C) 2004 Oren Ben-Kiki # This file is distributed under the same terms as the Automake macro files. # Generate automatic documentation using Doxygen. Goals and variables values # are controlled by the various DX_COND_??? conditionals set by autoconf. # # The provided goals are: # doxygen-doc: Generate all doxygen documentation. # doxygen-run: Run doxygen, which will generate some of the documentation # (HTML, CHM, CHI, MAN, RTF, XML) but will not do the post # processing required for the rest of it (PS, PDF, and some MAN). # doxygen-man: Rename some doxygen generated man pages. # doxygen-ps: Generate doxygen PostScript documentation. # doxygen-pdf: Generate doxygen PDF documentation. # # Note that by default these are not integrated into the automake goals. If # doxygen is used to generate man pages, you can achieve this integration by # setting man3_MANS to the list of man pages generated and then adding the # dependency: # # $(man3_MANS): doxygen-doc # # This will cause make to run doxygen and generate all the documentation. # # The following variable is intended for use in Makefile.am: # # DX_CLEANFILES = everything to clean. # # This is usually added to MOSTLYCLEANFILES. VPATH = @srcdir@ am__is_gnu_make = { \ if test -z '$(MAKELEVEL)'; then \ false; \ elif test -n '$(MAKE_HOST)'; then \ true; \ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ true; \ else \ false; \ fi; \ } am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = doc ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \ $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \ $(top_srcdir)/m4/longlong.m4 $(top_srcdir)/m4/ltoptions.m4 \ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \ $(top_srcdir)/acinclude.m4 \ $(top_srcdir)/m4.include/gnulib/mode_t.m4 \ $(top_srcdir)/m4.include/gnulib/stat-size.m4 \ $(top_srcdir)/m4.include/gnulib/fstypename.m4 \ $(top_srcdir)/m4.include/gnulib/fsusage.m4 \ $(top_srcdir)/m4.include/gnulib/mountlist.m4 \ $(top_srcdir)/m4.include/gnulib/windows-stat-inodes.m4 \ $(top_srcdir)/m4.include/gnulib/sys_types_h.m4 \ $(top_srcdir)/m4.include/ax_path_lib_pcre.m4 \ $(top_srcdir)/m4.include/dx_doxygen.m4 \ $(top_srcdir)/m4.include/ax_require_defined.m4 \ $(top_srcdir)/m4.include/ax_check_compile_flag.m4 \ $(top_srcdir)/m4.include/ax_append_flag.m4 \ $(top_srcdir)/m4.include/ax_append_compile_flags.m4 \ $(top_srcdir)/m4.include/mc-cflags.m4 \ $(top_srcdir)/m4.include/ax_gcc_func_attribute.m4 \ $(top_srcdir)/m4.include/mc-check-search-type.m4 \ $(top_srcdir)/m4.include/mc-get-fs-info.m4 \ $(top_srcdir)/m4.include/mc-with-x.m4 \ $(top_srcdir)/m4.include/mc-use-termcap.m4 \ $(top_srcdir)/m4.include/mc-with-screen.m4 \ $(top_srcdir)/m4.include/mc-with-screen-ncurses.m4 \ $(top_srcdir)/m4.include/mc-with-screen-slang.m4 \ $(top_srcdir)/m4.include/mc-with-internal-edit.m4 \ $(top_srcdir)/m4.include/mc-subshell.m4 \ $(top_srcdir)/m4.include/mc-background.m4 \ $(top_srcdir)/m4.include/mc-ext2fs-attr.m4 \ $(top_srcdir)/m4.include/mc-glib.m4 \ $(top_srcdir)/m4.include/mc-vfs.m4 \ $(top_srcdir)/m4.include/vfs/rpc.m4 \ $(top_srcdir)/m4.include/vfs/socket.m4 \ $(top_srcdir)/m4.include/vfs/mc-vfs-extfs.m4 \ $(top_srcdir)/m4.include/vfs/mc-vfs-sfs.m4 \ $(top_srcdir)/m4.include/vfs/mc-vfs-ftp.m4 \ $(top_srcdir)/m4.include/vfs/mc-vfs-sftp.m4 \ $(top_srcdir)/m4.include/vfs/mc-vfs-fish.m4 \ $(top_srcdir)/m4.include/vfs/mc-vfs-undelfs.m4 \ $(top_srcdir)/m4.include/vfs/mc-vfs-tarfs.m4 \ $(top_srcdir)/m4.include/vfs/mc-vfs-cpiofs.m4 \ $(top_srcdir)/m4.include/mc-version.m4 \ $(top_srcdir)/m4.include/mc-tests.m4 \ $(top_srcdir)/m4.include/mc-i18n.m4 \ $(top_srcdir)/m4.include/mc-assert.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ ctags-recursive dvi-recursive html-recursive info-recursive \ install-data-recursive install-dvi-recursive \ install-exec-recursive install-html-recursive \ install-info-recursive install-pdf-recursive \ install-ps-recursive install-recursive installcheck-recursive \ installdirs-recursive pdf-recursive ps-recursive \ tags-recursive uninstall-recursive am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive am__recursive_targets = \ $(RECURSIVE_TARGETS) \ $(RECURSIVE_CLEAN_TARGETS) \ $(am__extra_recursive_targets) AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ distdir distdir-am am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/doxygen-include.am \ COPYING INSTALL NEWS README TODO DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CHECK_CFLAGS = @CHECK_CFLAGS@ CHECK_LIBS = @CHECK_LIBS@ COM_ERR_CFLAGS = @COM_ERR_CFLAGS@ COM_ERR_LIBS = @COM_ERR_LIBS@ CP1251 = @CP1251@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CSCOPE = @CSCOPE@ CTAGS = @CTAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DOC_LINGUAS = @DOC_LINGUAS@ DOXYGEN_PAPER_SIZE = @DOXYGEN_PAPER_SIZE@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ DX_CONFIG = @DX_CONFIG@ DX_DOCDIR = @DX_DOCDIR@ DX_DOT = @DX_DOT@ DX_DOXYGEN = @DX_DOXYGEN@ DX_DVIPS = @DX_DVIPS@ DX_EGREP = @DX_EGREP@ DX_ENV = @DX_ENV@ DX_FLAG_chi = @DX_FLAG_chi@ DX_FLAG_chm = @DX_FLAG_chm@ DX_FLAG_doc = @DX_FLAG_doc@ DX_FLAG_dot = @DX_FLAG_dot@ DX_FLAG_html = @DX_FLAG_html@ DX_FLAG_man = @DX_FLAG_man@ DX_FLAG_pdf = @DX_FLAG_pdf@ DX_FLAG_ps = @DX_FLAG_ps@ DX_FLAG_rtf = @DX_FLAG_rtf@ DX_FLAG_xml = @DX_FLAG_xml@ DX_HHC = @DX_HHC@ DX_LATEX = @DX_LATEX@ DX_MAKEINDEX = @DX_MAKEINDEX@ DX_PDFLATEX = @DX_PDFLATEX@ DX_PERL = @DX_PERL@ DX_PROJECT = @DX_PROJECT@ E2P_CFLAGS = @E2P_CFLAGS@ E2P_LIBS = @E2P_LIBS@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ ETAGS = @ETAGS@ EXEEXT = @EXEEXT@ EXT2FS_CFLAGS = @EXT2FS_CFLAGS@ EXT2FS_LIBS = @EXT2FS_LIBS@ EXTHELPERSDIR = @EXTHELPERSDIR@ FGREP = @FGREP@ FILECMD = @FILECMD@ GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ GLIB_CFLAGS = @GLIB_CFLAGS@ GLIB_LIBS = @GLIB_LIBS@ GMODULE_CFLAGS = @GMODULE_CFLAGS@ GMODULE_LIBS = @GMODULE_LIBS@ GMSGFMT = @GMSGFMT@ GMSGFMT_015 = @GMSGFMT_015@ GREP = @GREP@ HAVE_FILECMD = @HAVE_FILECMD@ HAVE_ZIPINFO = @HAVE_ZIPINFO@ HAVE_nroff = @HAVE_nroff@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTLLIBS = @INTLLIBS@ INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBICONV = @LIBICONV@ LIBINTL = @LIBINTL@ LIBMC_RELEASE = @LIBMC_RELEASE@ LIBMC_VERSION = @LIBMC_VERSION@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBSSH_CFLAGS = @LIBSSH_CFLAGS@ LIBSSH_LIBS = @LIBSSH_LIBS@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBICONV = @LTLIBICONV@ LTLIBINTL = @LTLIBINTL@ LTLIBOBJS = @LTLIBOBJS@ LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANDOC = @MANDOC@ MANIFEST_TOOL = @MANIFEST_TOOL@ MAN_DATE = @MAN_DATE@ MAN_FLAGS = @MAN_FLAGS@ MAN_VERSION = @MAN_VERSION@ MCLIBS = @MCLIBS@ MKDIR_P = @MKDIR_P@ MSGFMT = @MSGFMT@ MSGFMT_015 = @MSGFMT_015@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PCRE_CPPFLAGS = @PCRE_CPPFLAGS@ PCRE_LIBS = @PCRE_LIBS@ PERL = @PERL@ PERL_FOR_BUILD = @PERL_FOR_BUILD@ PKG_CONFIG = @PKG_CONFIG@ PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ POSUB = @POSUB@ PYTHON = @PYTHON@ RANLIB = @RANLIB@ RUBY = @RUBY@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ SLANG_CFLAGS = @SLANG_CFLAGS@ SLANG_LIBS = @SLANG_LIBS@ STRIP = @STRIP@ TESTS_LDFLAGS = @TESTS_LDFLAGS@ UNZIP = @UNZIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ X11_WWW = @X11_WWW@ XGETTEXT = @XGETTEXT@ XGETTEXT_015 = @XGETTEXT_015@ XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ XMKMF = @XMKMF@ X_CFLAGS = @X_CFLAGS@ X_EXTRA_LIBS = @X_EXTRA_LIBS@ X_LIBS = @X_LIBS@ X_PRE_LIBS = @X_PRE_LIBS@ ZIP = @ZIP@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ runstatedir = @runstatedir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ DIST_SUBDIRS = hints man hlp SUBDIRS = hints man hlp DOCS = FAQ HACKING INSTALL INSTALL.FAST MAINTAINERS README.QNX MIRRORS.txt EXTRA_DIST = $(DX_CONFIG) doxygen-include.am $(DOCS) @DX_COND_doc_TRUE@@DX_COND_html_TRUE@DX_CLEAN_HTML = @DX_DOCDIR@/html @DX_COND_chm_TRUE@@DX_COND_doc_TRUE@DX_CLEAN_CHM = @DX_DOCDIR@/chm @DX_COND_chi_TRUE@@DX_COND_chm_TRUE@@DX_COND_doc_TRUE@DX_CLEAN_CHI = @DX_DOCDIR@/@PACKAGE@.chi @DX_COND_doc_TRUE@@DX_COND_man_TRUE@DX_CLEAN_MAN = @DX_DOCDIR@/man @DX_COND_doc_TRUE@@DX_COND_rtf_TRUE@DX_CLEAN_RTF = @DX_DOCDIR@/rtf @DX_COND_doc_TRUE@@DX_COND_xml_TRUE@DX_CLEAN_XML = @DX_DOCDIR@/xml @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@DX_CLEAN_PS = @DX_DOCDIR@/@PACKAGE@.ps @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@DX_PS_GOAL = doxygen-ps @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@DX_CLEAN_PDF = @DX_DOCDIR@/@PACKAGE@.pdf @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@DX_PDF_GOAL = doxygen-pdf @DX_COND_doc_TRUE@@DX_COND_latex_TRUE@DX_CLEAN_LATEX = @DX_DOCDIR@/latex @DX_COND_doc_TRUE@DX_CLEANFILES = \ @DX_COND_doc_TRUE@ @DX_DOCDIR@/@PACKAGE@.tag \ @DX_COND_doc_TRUE@ -r \ @DX_COND_doc_TRUE@ $(DX_CLEAN_HTML) \ @DX_COND_doc_TRUE@ $(DX_CLEAN_CHM) \ @DX_COND_doc_TRUE@ $(DX_CLEAN_CHI) \ @DX_COND_doc_TRUE@ $(DX_CLEAN_MAN) \ @DX_COND_doc_TRUE@ $(DX_CLEAN_RTF) \ @DX_COND_doc_TRUE@ $(DX_CLEAN_XML) \ @DX_COND_doc_TRUE@ $(DX_CLEAN_PS) \ @DX_COND_doc_TRUE@ $(DX_CLEAN_PDF) \ @DX_COND_doc_TRUE@ $(DX_CLEAN_LATEX) all: all-recursive .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/doxygen-include.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu doc/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ esac; $(srcdir)/doxygen-include.am $(am__empty): $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs # This directory's subdirectories are mostly independent; you can cd # into them and run 'make' without going through this Makefile. # To change the values of 'make' variables: instead of editing Makefiles, # (1) if the variable is set in 'config.status', edit 'config.status' # (which will cause the Makefiles to be regenerated when you run 'make'); # (2) otherwise, pass the desired values on the 'make' command line. $(am__recursive_targets): @fail=; \ if $(am__make_keepgoing); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-recursive TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-recursive CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscopelist: cscopelist-recursive cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) distdir-am distdir-am: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ $(am__make_dryrun) \ || test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done check-am: all-am check: check-recursive all-am: Makefile installdirs: installdirs-recursive installdirs-am: install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f Makefile distclean-am: clean-am distclean-generic distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: .MAKE: $(am__recursive_targets) install-am install-strip .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \ check-am clean clean-generic clean-libtool cscopelist-am ctags \ ctags-am distclean distclean-generic distclean-libtool \ distclean-tags distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-info install-info-am install-man \ install-pdf install-pdf-am install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ installdirs-am maintainer-clean maintainer-clean-generic \ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ ps ps-am tags tags-am uninstall uninstall-am .PRECIOUS: Makefile @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@doxygen-ps: @DX_DOCDIR@/@PACKAGE@.ps @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@@DX_DOCDIR@/@PACKAGE@.ps: @DX_DOCDIR@/@PACKAGE@.tag @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ cd @DX_DOCDIR@/latex; \ @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ rm -f *.aux *.toc *.idx *.ind *.ilg *.log *.out; \ @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ $(DX_LATEX) refman.tex; \ @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ $(MAKEINDEX_PATH) refman.idx; \ @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ $(DX_LATEX) refman.tex; \ @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ countdown=5; \ @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ while $(DX_EGREP) 'Rerun (LaTeX|to get cross-references right)' \ @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ refman.log > /dev/null 2>&1 \ @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ && test $$countdown -gt 0; do \ @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ $(DX_LATEX) refman.tex; \ @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ countdown=`expr $$countdown - 1`; \ @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ done; \ @DX_COND_doc_TRUE@@DX_COND_ps_TRUE@ $(DX_DVIPS) -o ../@PACKAGE@.ps refman.dvi @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@doxygen-pdf: @DX_DOCDIR@/@PACKAGE@.pdf @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@@DX_DOCDIR@/@PACKAGE@.pdf: @DX_DOCDIR@/@PACKAGE@.tag @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ cd @DX_DOCDIR@/latex; \ @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ rm -f *.aux *.toc *.idx *.ind *.ilg *.log *.out; \ @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ $(DX_PDFLATEX) refman.tex; \ @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ $(DX_MAKEINDEX) refman.idx; \ @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ $(DX_PDFLATEX) refman.tex; \ @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ countdown=5; \ @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ while $(DX_EGREP) 'Rerun (LaTeX|to get cross-references right)' \ @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ refman.log > /dev/null 2>&1 \ @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ && test $$countdown -gt 0; do \ @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ $(DX_PDFLATEX) refman.tex; \ @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ countdown=`expr $$countdown - 1`; \ @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ done; \ @DX_COND_doc_TRUE@@DX_COND_pdf_TRUE@ mv refman.pdf ../@PACKAGE@.pdf @DX_COND_doc_TRUE@.PHONY: doxygen-run doxygen-doc $(DX_PS_GOAL) $(DX_PDF_GOAL) @DX_COND_doc_TRUE@.INTERMEDIATE: doxygen-run $(DX_PS_GOAL) $(DX_PDF_GOAL) @DX_COND_doc_TRUE@doxygen-run: @DX_DOCDIR@/@PACKAGE@.tag @DX_COND_doc_TRUE@doxygen-doc: doxygen-run $(DX_PS_GOAL) $(DX_PDF_GOAL) @DX_COND_doc_TRUE@@DX_DOCDIR@/@PACKAGE@.tag: $(DX_CONFIG) $(pkginclude_HEADERS) @DX_COND_doc_TRUE@ rm -rf @DX_DOCDIR@ @DX_COND_doc_TRUE@ $(DX_ENV) $(DX_DOXYGEN) $(srcdir)/$(DX_CONFIG) # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: