diff options
| author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-04 14:31:17 +0000 |
|---|---|---|
| committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-04 14:31:17 +0000 |
| commit | 8020f71afd34d7696d7933659df2d763ab05542f (patch) | |
| tree | 2fdf1b5447ffd8bdd61e702ca183e814afdcb4fc /daemon/README.md | |
| parent | Initial commit. (diff) | |
| download | netdata-upstream/1.37.1.tar.xz netdata-upstream/1.37.1.zip | |
Adding upstream version 1.37.1.upstream/1.37.1upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'daemon/README.md')
| -rw-r--r-- | daemon/README.md | 520 |
1 files changed, 520 insertions, 0 deletions
diff --git a/daemon/README.md b/daemon/README.md new file mode 100644 index 0000000..c5951c6 --- /dev/null +++ b/daemon/README.md @@ -0,0 +1,520 @@ +<!-- +title: "Netdata daemon" +date: 2020-04-29 +custom_edit_url: https://github.com/netdata/netdata/edit/master/daemon/README.md +--> + +# Netdata daemon + +## Starting netdata + +- You can start Netdata by executing it with `/usr/sbin/netdata` (the installer will also start it). + +- You can stop Netdata by killing it with `killall netdata`. You can stop and start Netdata at any point. When + exiting, the [database engine](/database/engine/README.md) saves metrics to `/var/cache/netdata/dbengine/` so that + it can continue when started again. + +Access to the web site, for all graphs, is by default on port `19999`, so go to: + +```sh +http://127.0.0.1:19999/ +``` + +You can get the running config file at any time, by accessing `http://127.0.0.1:19999/netdata.conf`. + +### Starting Netdata at boot + +In the `system` directory you can find scripts and configurations for the +various distros. + +#### systemd + +The installer already installs `netdata.service` if it detects a systemd system. + +To install `netdata.service` by hand, run: + +```sh +# stop Netdata +killall netdata + +# copy netdata.service to systemd +cp system/netdata.service /etc/systemd/system/ + +# let systemd know there is a new service +systemctl daemon-reload + +# enable Netdata at boot +systemctl enable netdata + +# start Netdata +systemctl start netdata +``` + +#### init.d + +In the system directory you can find `netdata-lsb`. Copy it to the proper place according to your distribution +documentation. For Ubuntu, this can be done via running the following commands as root. + +```sh +# copy the Netdata startup file to /etc/init.d +cp system/netdata-lsb /etc/init.d/netdata + +# make sure it is executable +chmod +x /etc/init.d/netdata + +# enable it +update-rc.d netdata defaults +``` + +#### openrc (gentoo) + +In the `system` directory you can find `netdata-openrc`. Copy it to the proper +place according to your distribution documentation. + +#### CentOS / Red Hat Enterprise Linux + +For older versions of RHEL/CentOS that don't have systemd, an init script is included in the system directory. This can +be installed by running the following commands as root. + +```sh +# copy the Netdata startup file to /etc/init.d +cp system/netdata-init-d /etc/init.d/netdata + +# make sure it is executable +chmod +x /etc/init.d/netdata + +# enable it +chkconfig --add netdata +``` + +_There have been some recent work on the init script, see PR +<https://github.com/netdata/netdata/pull/403>_ + +#### other systems + +You can start Netdata by running it from `/etc/rc.local` or equivalent. + +## Command line options + +Normally you don't need to supply any command line arguments to netdata. + +If you do though, they override the configuration equivalent options. + +To get a list of all command line parameters supported, run: + +```sh +netdata -h +``` + +The program will print the supported command line parameters. + +The command line options of the Netdata 1.10.0 version are the following: + +```sh + ^ + |.-. .-. .-. .-. . netdata + | '-' '-' '-' '-' real-time performance monitoring, done right! + +----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+---> + + Copyright (C) 2016-2022, Netdata, Inc. <info@netdata.cloud> + Released under GNU General Public License v3 or later. + All rights reserved. + + Home Page : https://netdata.cloud + Source Code: https://github.com/netdata/netdata + Docs : https://learn.netdata.cloud + Support : https://github.com/netdata/netdata/issues + License : https://github.com/netdata/netdata/blob/master/LICENSE.md + + Twitter : https://twitter.com/linuxnetdata + LinkedIn : https://linkedin.com/company/netdata-cloud/ + Facebook : https://facebook.com/linuxnetdata/ + + + SYNOPSIS: netdata [options] + + Options: + + -c filename Configuration file to load. + Default: /etc/netdata/netdata.conf + + -D Do not fork. Run in the foreground. + Default: run in the background + + -h Display this help message. + + -P filename File to save a pid while running. + Default: do not save pid to a file + + -i IP The IP address to listen to. + Default: all IP addresses IPv4 and IPv6 + + -p port API/Web port to use. + Default: 19999 + + -s path Prefix for /proc and /sys (for containers). + Default: no prefix + + -t seconds The internal clock of netdata. + Default: 1 + + -u username Run as user. + Default: netdata + + -v Print netdata version and exit. + + -V Print netdata version and exit. + + -W options See Advanced options below. + + + Advanced options: + + -W stacksize=N Set the stacksize (in bytes). + + -W debug_flags=N Set runtime tracing to debug.log. + + -W unittest Run internal unittests and exit. + + -W createdataset=N Create a DB engine dataset of N seconds and exit. + + -W set section option value + set netdata.conf option from the command line. + + -W buildinfo Print the version, the configure options, + a list of optional features, and whether they + are enabled or not. + + -W buildinfojson Print the version, the configure options, + a list of optional features, and whether they + are enabled or not, in JSON format. + + -W simple-pattern pattern string + Check if string matches pattern and exit. + + -W "claim -token=TOKEN -rooms=ROOM1,ROOM2 url=https://api.netdata.cloud" + Connect the agent to the workspace rooms pointed to by TOKEN and ROOM*. + + Signals netdata handles: + + - HUP Close and reopen log files. + - USR1 Save internal DB to disk. + - USR2 Reload health configuration. +``` + +You can send commands during runtime via [netdatacli](/cli/README.md). + +## Log files + +Netdata uses 3 log files: + +1. `error.log` +2. `access.log` +3. `debug.log` + +Any of them can be disabled by setting it to `/dev/null` or `none` in `netdata.conf`. By default `error.log` and +`access.log` are enabled. `debug.log` is only enabled if debugging/tracing is also enabled (Netdata needs to be compiled +with debugging enabled). + +Log files are stored in `/var/log/netdata/` by default. + +### error.log + +The `error.log` is the `stderr` of the `netdata` daemon and all external plugins +run by `netdata`. + +So if any process, in the Netdata process tree, writes anything to its standard error, +it will appear in `error.log`. + +For most Netdata programs (including standard external plugins shipped by netdata), the following lines may appear: + +| tag | description | +|:-:|:----------| +| `INFO` | Something important the user should know. | +| `ERROR` | Something that might disable a part of netdata.<br/>The log line includes `errno` (if it is not zero). | +| `FATAL` | Something prevented a program from running.<br/>The log line includes `errno` (if it is not zero) and the program exited. | + +So, when auto-detection of data collection fail, `ERROR` lines are logged and the relevant modules are disabled, but the +program continues to run. + +When a Netdata program cannot run at all, a `FATAL` line is logged. + +### access.log + +The `access.log` logs web requests. The format is: + +```txt +DATE: ID: (sent/all = SENT_BYTES/ALL_BYTES bytes PERCENT_COMPRESSION%, prep/sent/total PREP_TIME/SENT_TIME/TOTAL_TIME ms): ACTION CODE URL +``` + +where: + +- `ID` is the client ID. Client IDs are auto-incremented every time a client connects to netdata. +- `SENT_BYTES` is the number of bytes sent to the client, without the HTTP response header. +- `ALL_BYTES` is the number of bytes of the response, before compression. +- `PERCENT_COMPRESSION` is the percentage of traffic saved due to compression. +- `PREP_TIME` is the time in milliseconds needed to prepared the response. +- `SENT_TIME` is the time in milliseconds needed to sent the response to the client. +- `TOTAL_TIME` is the total time the request was inside Netdata (from the first byte of the request to the last byte + of the response). +- `ACTION` can be `filecopy`, `options` (used in CORS), `data` (API call). + +### debug.log + +See [debugging](#debugging). + +## Netdata process scheduling policy + +By default Netdata versions prior to 1.34.0 run with the `idle` process scheduling policy, so that it uses CPU +resources, only when there is idle CPU to spare. On very busy servers (or weak servers), this can lead to gaps on +the charts. + +Starting with version 1.34.0, Netdata instead uses the `batch` scheduling policy by default. This largely eliminates +issues with gaps in charts on busy systems while still keeping the impact on the rest of the system low. + +You can set Netdata scheduling policy in `netdata.conf`, like this: + +```conf +[global] + process scheduling policy = idle +``` + +You can use the following: + +| policy | description | +| :-----------------------: | :---------- | +| `idle` | use CPU only when there is spare - this is lower than nice 19 - it is the default for Netdata and it is so low that Netdata will run in "slow motion" under extreme system load, resulting in short (1-2 seconds) gaps at the charts. | +| `other`<br/>or<br/>`nice` | this is the default policy for all processes under Linux. It provides dynamic priorities based on the `nice` level of each process. Check below for setting this `nice` level for netdata. | +| `batch` | This policy is similar to `other` in that it schedules the thread according to its dynamic priority (based on the `nice` value). The difference is that this policy will cause the scheduler to always assume that the thread is CPU-intensive. Consequently, the scheduler will apply a small scheduling penalty with respect to wake-up behavior, so that this thread is mildly disfavored in scheduling decisions. | +| `fifo` | `fifo` can be used only with static priorities higher than 0, which means that when a `fifo` threads becomes runnable, it will always immediately preempt any currently running `other`, `batch`, or `idle` thread. `fifo` is a simple scheduling algorithm without time slicing. | +| `rr` | a simple enhancement of `fifo`. Everything described above for `fifo` also applies to `rr`, except that each thread is allowed to run only for a maximum time quantum. | +| `keep`<br/>or<br/>`none` | do not set scheduling policy, priority or nice level - i.e. keep running with whatever it is set already (e.g. by systemd). | + +For more information see `man sched`. + +### scheduling priority for `rr` and `fifo` + +Once the policy is set to one of `rr` or `fifo`, the following will appear: + +```conf +[global] + process scheduling priority = 0 +``` + +These priorities are usually from 0 to 99. Higher numbers make the process more +important. + +### nice level for policies `other` or `batch` + +When the policy is set to `other`, `nice`, or `batch`, the following will appear: + +```conf +[global] + process nice level = 19 +``` + +## scheduling settings and systemd + +Netdata will not be able to set its scheduling policy and priority to more important values when it is started as the +`netdata` user (systemd case). + +You can set these settings at `/etc/systemd/system/netdata.service`: + +```sh +[Service] +# By default Netdata switches to scheduling policy idle, which makes it use CPU, only +# when there is spare available. +# Valid policies: other (the system default) | batch | idle | fifo | rr +#CPUSchedulingPolicy=other + +# This sets the maximum scheduling priority Netdata can set (for policies: rr and fifo). +# Netdata (via [global].process scheduling priority in netdata.conf) can only lower this value. +# Priority gets values 1 (lowest) to 99 (highest). +#CPUSchedulingPriority=1 + +# For scheduling policy 'other' and 'batch', this sets the lowest niceness of netdata. +# Netdata (via [global].process nice level in netdata.conf) can only increase the value set here. +#Nice=0 +``` + +Run `systemctl daemon-reload` to reload these changes. + +Now, tell Netdata to keep these settings, as set by systemd, by editing +`netdata.conf` and setting: + +```conf +[global] + process scheduling policy = keep +``` + +Using the above, whatever scheduling settings you have set at `netdata.service` +will be maintained by netdata. + +### Example 1: Netdata with nice -1 on non-systemd systems + +On a system that is not based on systemd, to make Netdata run with nice level -1 (a little bit higher to the default for +all programs), edit `netdata.conf` and set: + +```conf +[global] + process scheduling policy = other + process nice level = -1 +``` + +then execute this to [restart Netdata](/docs/configure/start-stop-restart.md): + +```sh +sudo systemctl restart netdata +``` + +#### Example 2: Netdata with nice -1 on systemd systems + +On a system that is based on systemd, to make Netdata run with nice level -1 (a little bit higher to the default for all +programs), edit `netdata.conf` and set: + +```conf +[global] + process scheduling policy = keep +``` + +edit /etc/systemd/system/netdata.service and set: + +```sh +[Service] +CPUSchedulingPolicy=other +Nice=-1 +``` + +then execute: + +```sh +sudo systemctl daemon-reload +sudo systemctl restart netdata +``` + +## Virtual memory + +You may notice that netdata's virtual memory size, as reported by `ps` or `/proc/pid/status` (or even netdata's +applications virtual memory chart) is unrealistically high. + +For example, it may be reported to be 150+MB, even if the resident memory size is just 25MB. Similar values may be +reported for Netdata plugins too. + +Check this for example: A Netdata installation with default settings on Ubuntu +16.04LTS. The top chart is **real memory used**, while the bottom one is +**virtual memory**: + + + +### Why does this happen? + +The system memory allocator allocates virtual memory arenas, per thread running. On Linux systems this defaults to 16MB +per thread on 64 bit machines. So, if you get the difference between real and virtual memory and divide it by 16MB you +will roughly get the number of threads running. + +The system does this for speed. Having a separate memory arena for each thread, allows the threads to run in parallel in +multi-core systems, without any locks between them. + +This behaviour is system specific. For example, the chart above when running +Netdata on Alpine Linux (that uses **musl** instead of **glibc**) is this: + + + +### Can we do anything to lower it? + +Since Netdata already uses minimal memory allocations while it runs (i.e. it adapts its memory on start, so that while +repeatedly collects data it does not do memory allocations), it already instructs the system memory allocator to +minimize the memory arenas for each thread. We have also added [2 configuration +options](https://github.com/netdata/netdata/blob/5645b1ee35248d94e6931b64a8688f7f0d865ec6/src/main.c#L410-L418) to allow +you tweak these settings: `glibc malloc arena max for plugins` and `glibc malloc arena max for netdata`. + +However, even if we instructed the memory allocator to use just one arena, it +seems it allocates an arena per thread. + +Netdata also supports `jemalloc` and `tcmalloc`, however both behave exactly the +same to the glibc memory allocator in this aspect. + +### Is this a problem? + +No, it is not. + +Linux reserves real memory (physical RAM) in pages (on x86 machines pages are 4KB each). So even if the system memory +allocator is allocating huge amounts of virtual memory, only the 4KB pages that are actually used are reserving physical +RAM. The **real memory** chart on Netdata application section, shows the amount of physical memory these pages occupy(it +accounts the whole pages, even if parts of them are actually used). + +## Debugging + +When you compile Netdata with debugging: + +1. compiler optimizations for your CPU are disabled (Netdata will run somewhat slower) + +2. a lot of code is added all over netdata, to log debug messages to `/var/log/netdata/debug.log`. However, nothing is + printed by default. Netdata allows you to select which sections of Netdata you want to trace. Tracing is activated + via the config option `debug flags`. It accepts a hex number, to enable or disable specific sections. You can find + the options supported at [log.h](https://raw.githubusercontent.com/netdata/netdata/master/libnetdata/log/log.h). + They are the `D_*` defines. The value `0xffffffffffffffff` will enable all possible debug flags. + +Once Netdata is compiled with debugging and tracing is enabled for a few sections, the file `/var/log/netdata/debug.log` +will contain the messages. + +> Do not forget to disable tracing (`debug flags = 0`) when you are done tracing. The file `debug.log` can grow too +> fast. + +### compiling Netdata with debugging + +To compile Netdata with debugging, use this: + +```sh +# step into the Netdata source directory +cd /usr/src/netdata.git + +# run the installer with debugging enabled +CFLAGS="-O1 -ggdb -DNETDATA_INTERNAL_CHECKS=1" ./netdata-installer.sh +``` + +The above will compile and install Netdata with debugging info embedded. You can now use `debug flags` to set the +section(s) you need to trace. + +### debugging crashes + +We have made the most to make Netdata crash free. If however, Netdata crashes on your system, it would be very helpful +to provide stack traces of the crash. Without them, is will be almost impossible to find the issue (the code base is +quite large to find such an issue by just observing it). + +To provide stack traces, **you need to have Netdata compiled with debugging**. There is no need to enable any tracing +(`debug flags`). + +Then you need to be in one of the following 2 cases: + +1. Netdata crashes and you have a core dump + +2. you can reproduce the crash + +If you are not on these cases, you need to find a way to be (i.e. if your system does not produce core dumps, check your +distro documentation to enable them). + +### Netdata crashes and you have a core dump + +> you need to have Netdata compiled with debugging info for this to work (check above) + +Run the following command and post the output on a github issue. + +```sh +gdb $(which netdata) /path/to/core/dump +``` + +### you can reproduce a Netdata crash on your system + +> you need to have Netdata compiled with debugging info for this to work (check above) + +Install the package `valgrind` and run: + +```sh +valgrind $(which netdata) -D +``` + +Netdata will start and it will be a lot slower. Now reproduce the crash and `valgrind` will dump on your console the +stack trace. Open a new github issue and post the output. + + |