diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-04 14:31:17 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-04 14:31:17 +0000 |
commit | 8020f71afd34d7696d7933659df2d763ab05542f (patch) | |
tree | 2fdf1b5447ffd8bdd61e702ca183e814afdcb4fc /packaging/installer/UPDATE.md | |
parent | Initial commit. (diff) | |
download | netdata-8020f71afd34d7696d7933659df2d763ab05542f.tar.xz netdata-8020f71afd34d7696d7933659df2d763ab05542f.zip |
Adding upstream version 1.37.1.upstream/1.37.1upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'packaging/installer/UPDATE.md')
-rw-r--r-- | packaging/installer/UPDATE.md | 174 |
1 files changed, 174 insertions, 0 deletions
diff --git a/packaging/installer/UPDATE.md b/packaging/installer/UPDATE.md new file mode 100644 index 0000000..009e970 --- /dev/null +++ b/packaging/installer/UPDATE.md @@ -0,0 +1,174 @@ +<!-- +title: "Update the Netdata Agent" +description: "If you opted out of automatic updates, you need to update your Netdata Agent to the latest nightly or stable version." +custom_edit_url: https://github.com/netdata/netdata/edit/master/packaging/installer/UPDATE.md +--> + +# Update the Netdata Agent + +By default, the Netdata Agent automatically updates with the latest nightly or stable version depending on which +you installed. If you opted out of automatic updates, you need to update your Netdata Agent to the latest nightly +or stable version. You can also [enable or disable automatic updates on an existing install](#control-automatic-updates). + +> 💡 Looking to reinstall the Netdata Agent to enable a feature, update an Agent that cannot update automatically, or +> troubleshoot an error during the installation process? See our [reinstallation doc](/packaging/installer/REINSTALL.md) +> for reinstallation steps. + +Before you update the Netdata Agent, check to see if your Netdata Agent is already up-to-date by clicking on the update +icon in the local Agent dashboard's top navigation. This modal informs you whether your Agent needs an update or not. + +The exact update method to use depends on the install type: + +- Installs with an install type of 'custom' usually indicate installing a third-party package through the system + package manager. To update these installs, you should update the package just like you would any other package + on your system. +- Installs with an install type starting with `binpkg` or ending with `build` or `static` can be updated using + our [regular update method](#updates-for-most-systems). +- Installs with an install type of 'oci' were created from our official Docker images, and should be updated + using our [Docker](#docker) update procedure. +- macOS users should check [our update instructions for macOS](#macos). +- Manually built installs should check [our update instructions for manual builds](#manual-installation-from-git). + +## Determine which installation method you used + +Starting with netdata v1.33.0, you can use Netdata itself to determine the installation type by running: + +```bash +netdata -W buildinfo | grep 'Install type:' +``` + +If you are using an older version of Netdata, or the above command produces no output, you can run our one-line +installation script in dry-run mode to attempt to determine what method to use to update by running the following +command: + +```bash +wget -O /tmp/netdata-kickstart.sh https://my-netdata.io/kickstart.sh && sh /tmp/netdata-kickstart.sh --dry-run +``` + +Note that if you installed Netdata using an installation prefix, you will need to add an `--install` option +specifying that prefix to make sure it finds the existing install. + +If you see a line starting with `--- Would attempt to update existing installation by running the updater script +located at:`, then our [regular update method](#updates-for-most-systems) will work for you. + +Otherwise, it should either indicate that the installation type is not supported (which probably means you either +have a `custom` instal or built Netdata manually) or indicate that it would create a new install (which means that +you either used a non-standard install path, or that you don’t actually have Netdata installed). + +## Updates for most systems + +In most cases, you can update netdata using our one-line installation script. This script will automatically +run the update script that was installed as part of the initial install (even if you disabled automatic updates) +and preserve the existing install options you specified. + +If you installed Netdata using an installation prefix, you will need to add an `--install` option specifying +that prefix to this command to make sure it finds Netdata. + +```bash +wget -O /tmp/netdata-kickstart.sh https://my-netdata.io/kickstart.sh && sh /tmp/netdata-kickstart.sh +``` + +### Issues with older binpkg installs + +The above command is known not to work with binpkg type installs for stable releases with a version number of +v1.33.1 or earlier, and nightly builds with a version number of v1.33.1-93 or earlier. If you have such a system, +the above command will report that it found an existing install, and then issue a warning about not being able to +find the updater script. + +On such installs, you can update Netdata using your distribution package manager. + +### If the kickstart script does not work + +If the above command fails, you can [reinstall +Netdata](/packaging/installer/REINSTALL.md#one-line-installer-script-kickstartsh) to get the latest version. This +also preserves your [configuration](/docs/configure/nodes.md) in `netdata.conf` or other files just like updating +normally would, though you will need to specify any installation options you used originally again. + +## Docker + +Docker-based installations do not update automatically. To update an Netdata Agent running in a Docker container, you +must pull the [latest image from Docker Hub](https://hub.docker.com/r/netdata/netdata), stop and remove the container, +and re-create it using the latest image. + +First, pull the latest version of the image. + +```bash +docker pull netdata/netdata:latest +``` + +Next, to stop and remove any containers using the `netdata/netdata` image. Replace `netdata` if you changed it from the +default. + +```bash +docker stop netdata +docker rm netdata +``` + +You can now re-create your Netdata container using the `docker` command or a `docker-compose.yml` file. See our [Docker +installation instructions](/packaging/docker/README.md#create-a-new-netdata-agent-container) for details. + +## macOS + +If you installed Netdata on your macOS system using Homebrew, you can explicitly request an update: + +```bash +brew upgrade netdata +``` + +Homebrew downloads the latest Netdata via the +[formulae](https://github.com/Homebrew/homebrew-core/blob/master/Formula/netdata.rb), ensures all dependencies are met, +and updates Netdata via reinstallation. + +If you instead installed Netdata using our one-line installation script, you can use our [regular update +instructions](#updates-for-most-systems) to update Netdata. + +## Manual installation from Git + +If you installed [Netdata manually from Git](/packaging/installer/methods/manual.md), you can run that installer again +to update your agent. First, run our automatic requirements installer, which works on many Linux distributions, to +ensure your system has the dependencies necessary for new features. + +```bash +bash <(curl -sSL https://raw.githubusercontent.com/netdata/netdata/master/packaging/installer/install-required-packages.sh) +``` + +Navigate to the directory where you first cloned the Netdata repository, pull the latest source code, and run +`netdata-install.sh` again. This process compiles Netdata with the latest source code and updates it via reinstallation. + +```bash +cd /path/to/netdata/git +git pull origin master +sudo ./netdata-installer.sh +``` + +> ⚠️ If you installed Netdata with any optional parameters, such as `--no-updates` to disable automatic updates, and +> want to retain those settings, you need to set them again during this process. + +## Control automatic updates + +Starting with Netdata v1.34.0, you can easily enable or disable automatic updates on an existing installation +using the updater script. + +For most installs on Linux, you can enable auto-updates with: + +```bash +/usr/libexec/netdata/netdata-updater.sh --enable-auto-updates +``` + +and disable them with: + +```bash +/usr/libexec/netdata/netdata-updater.sh --disable-auto-updates +``` + +For static installs, instead use: + +```bash +/opt/netdata/usr/libexec/netdata/netdata-updater.sh --enable-auto-updates +``` + +and: + +```bash +/opt/netdata/usr/libexec/netdata/netdata-updater.sh --disable-auto-updates +``` |