diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-04 14:31:17 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-04 14:31:17 +0000 |
commit | 8020f71afd34d7696d7933659df2d763ab05542f (patch) | |
tree | 2fdf1b5447ffd8bdd61e702ca183e814afdcb4fc /streaming/stream.conf | |
parent | Initial commit. (diff) | |
download | netdata-8020f71afd34d7696d7933659df2d763ab05542f.tar.xz netdata-8020f71afd34d7696d7933659df2d763ab05542f.zip |
Adding upstream version 1.37.1.upstream/1.37.1upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to '')
-rw-r--r-- | streaming/stream.conf | 246 |
1 files changed, 246 insertions, 0 deletions
diff --git a/streaming/stream.conf b/streaming/stream.conf new file mode 100644 index 0000000..7c9ccc9 --- /dev/null +++ b/streaming/stream.conf @@ -0,0 +1,246 @@ +# netdata configuration for aggregating data from remote hosts +# +# API keys authorize a pair of sending-receiving netdata servers. +# Once their communication is authorized, they can exchange metrics for any +# number of hosts. +# +# You can generate API keys, with the linux command: uuidgen + + +# ----------------------------------------------------------------------------- +# 1. ON CHILD NETDATA - THE ONE THAT WILL BE SENDING METRICS + +[stream] + # Enable this on child nodes, to have them send metrics. + enabled = no + + # Where is the receiving netdata? + # A space separated list of: + # + # [PROTOCOL:]HOST[%INTERFACE][:PORT][:SSL] + # + # If many are given, the first available will get the metrics. + # + # PROTOCOL = tcp, udp, or unix (only tcp and unix are supported by parent nodes) + # HOST = an IPv4, IPv6 IP, or a hostname, or a unix domain socket path. + # IPv6 IPs should be given with brackets [ip:address] + # INTERFACE = the network interface to use (only for IPv6) + # PORT = the port number or service name (/etc/services) + # SSL = when this word appear at the end of the destination string + # the Netdata will encrypt the connection with the parent. + # + # This communication is not HTTP (it cannot be proxied by web proxies). + destination = + + # Skip Certificate verification? + # The netdata child is configurated to avoid invalid SSL/TLS certificate, + # so certificates that are self-signed or expired will stop the streaming. + # Case the server certificate is not valid, you can enable the use of + # 'bad' certificates setting the next option as 'yes'. + #ssl skip certificate verification = yes + + # Certificate Authority Path + # OpenSSL has a default directory where the known certificates are stored. + # In case it is necessary, it is possible to change this rule using the variable + # "CApath", e.g. CApath = /etc/ssl/certs/ + # + #CApath = + + # Certificate Authority file + # When the Netdata parent has a certificate that is not recognized as valid, + # we can add it to the list of known certificates in "CApath" and give it to + # Netdata as an argument, e.g. CAfile = /etc/ssl/certs/cert.pem + # + #CAfile = + + # The API_KEY to use (as the sender) + api key = + + # Stream Compression + # The default is enabled + # You can control stream compression in this agent with options: yes | no + #enable compression = yes + + # The timeout to connect and send metrics + timeout seconds = 60 + + # If the destination line above does not specify a port, use this + default port = 19999 + + # filter the charts to be streamed + # netdata SIMPLE PATTERN: + # - space separated list of patterns (use \ to include spaces in patterns) + # - use * as wildcard, any number of times within each pattern + # - prefix a pattern with ! for a negative match (ie not stream the charts it matches) + # - the order of patterns is important (left to right) + # To send all except a few, use: !this !that * (ie append a wildcard pattern) + send charts matching = * + + # The buffer to use for sending metrics. + # 10MB is good for 60 seconds of data, so increase this if you expect latencies. + # The buffer is flushed on reconnects (this will not prevent gaps at the charts). + buffer size bytes = 10485760 + + # If the connection fails, or it disconnects, + # retry after that many seconds. + reconnect delay seconds = 5 + + # Sync the clock of the charts for that many iterations, when starting. + # It is ignored when replication is enabled + initial clock resync iterations = 60 + +# ----------------------------------------------------------------------------- +# 2. ON PARENT NETDATA - THE ONE THAT WILL BE RECEIVING METRICS + +# You can have one API key per child, +# or the same API key for all child nodes. +# +# netdata searches for options in this order: +# +# a) parent netdata settings (netdata.conf) +# b) [stream] section (above) +# c) [API_KEY] section (below, settings for the API key) +# d) [MACHINE_GUID] section (below, settings for each machine) +# +# You can combine the above (the more specific setting will be used). + +# API key authentication +# If the key is not listed here, it will not be able to push metrics. + +# [API_KEY] is [YOUR-API-KEY], i.e [11111111-2222-3333-4444-555555555555] +[API_KEY] + # Default settings for this API key + + # This GUID is to be used as an API key from remote agents connecting + # to this machine. Failure to match such a key, denies access. + # YOU MUST SET THIS FIELD ON ALL API KEYS. + type = api + + # You can disable the API key, by setting this to: no + # The default (for unknown API keys) is: no + enabled = no + + # A list of simple patterns matching the IPs of the servers that + # will be pushing metrics using this API key. + # The metrics are received via the API port, so the same IPs + # should also be matched at netdata.conf [web].allow connections from + allow from = * + + # The default history in entries, for all hosts using this API key. + # You can also set it per host below. + # For the default db mode (dbengine), this is ignored. + #default history = 3600 + + # The default memory mode to be used for all hosts using this API key. + # You can also set it per host below. + # If you don't set it here, the memory mode of netdata.conf will be used. + # Valid modes: + # save save on exit, load on start + # map like swap (continuously syncing to disks - you need SSD) + # ram keep it in RAM, don't touch the disk + # none no database at all (use this on headless proxies) + # dbengine like a traditional database + #default memory mode = dbengine + + # Shall we enable health monitoring for the hosts using this API key? + # 3 possible values: + # yes enable alarms + # no do not enable alarms + # auto enable alarms, only when the sending netdata is connected. For ephemeral child nodes or child system restarts, + # ensure that the netdata process on the child is gracefully stopped, to prevent invalid last_collected alarms + # You can also set it per host, below. + # The default is taken from [health].enabled of netdata.conf + #health enabled by default = auto + + # postpone alarms for a short period after the sender is connected + default postpone alarms on connect seconds = 60 + + # need to route metrics differently? set these. + # the defaults are the ones at the [stream] section (above) + #default proxy enabled = yes | no + #default proxy destination = IP:PORT IP:PORT ... + #default proxy api key = API_KEY + #default proxy send charts matching = * + + # Stream Compression + # By default it is enabled. + # You can control stream compression in this parent agent stream with options: yes | no + #enable compression = yes + + # Replication + # Enable replication for all hosts using this api key. Default: enabled + #enable replication = yes + + # How many seconds to replicate from each child. Default: a day + #seconds to replicate = 86400 + + # The duration we want to replicate per each step. + #replication_step = 600 + +# ----------------------------------------------------------------------------- +# 3. PER SENDING HOST SETTINGS, ON PARENT NETDATA +# THIS IS OPTIONAL - YOU DON'T HAVE TO CONFIGURE IT + +# This section exists to give you finer control of the parent settings for each +# child host, when the same API key is used by many netdata child nodes / proxies. +# +# Each netdata has a unique GUID - generated the first time netdata starts. +# You can find it at /var/lib/netdata/registry/netdata.public.unique.id +# (at the child). +# +# The host sending data will have one. If the host is not ephemeral, +# you can give settings for each sending host here. + +[MACHINE_GUID] + # This GUID is to be used as a MACHINE GUID from remote agents connecting + # to this machine, not an API key. + # YOU MUST SET THIS FIELD ON ALL MACHINE GUIDs. + type = machine + + # enable this host: yes | no + # When disabled, the parent will not receive metrics for this host. + # THIS IS NOT A SECURITY MECHANISM - AN ATTACKER CAN SET ANY OTHER GUID. + # Use only the API key for security. + enabled = no + + # A list of simple patterns matching the IPs of the servers that + # will be pushing metrics using this MACHINE GUID. + # The metrics are received via the API port, so the same IPs + # should also be matched at netdata.conf [web].allow connections from + # and at stream.conf [API_KEY].allow from + allow from = * + + # The number of entries in the database. + # This is ignored for db mode dbengine. + #history = 3600 + + # The memory mode of the database: save | map | ram | none | dbengine + #memory mode = dbengine + + # Health / alarms control: yes | no | auto + #health enabled = auto + + # postpone alarms when the sender connects + postpone alarms on connect seconds = 60 + + # need to route metrics differently? + # the defaults are the ones at the [API KEY] section + #proxy enabled = yes | no + #proxy destination = IP:PORT IP:PORT ... + #proxy api key = API_KEY + #proxy send charts matching = * + + # Stream Compression + # By default, enabled. + # You can control stream compression in this parent agent stream with options: yes | no + #enable compression = yes + + # Replication + # Enable replication for all hosts using this api key. + #enable replication = yes + + # How many seconds to replicate from each child. + #seconds to replicate = 86400 + + # The duration we want to replicate per each step. + #replication_step = 600 |