diff options
Diffstat (limited to 'completions/_nvme')
| -rw-r--r-- | completions/_nvme | 1010 |
1 files changed, 1010 insertions, 0 deletions
diff --git a/completions/_nvme b/completions/_nvme new file mode 100644 index 0000000..5910898 --- /dev/null +++ b/completions/_nvme @@ -0,0 +1,1010 @@ +#compdef _nvme nvme +# SPDX-License-Identifier: GPL-2.0-or-later + +# zsh completions for the nvme command-line interface, +# very loosely based on git and adb command completion +# Kelly Kaoudis kelly.n.kaoudis at intel.com, June 2015 + +_nvme () { + local -a _cmds + _cmds=( + 'id-ctrl:display information about the controller' + 'id-ns:display information about the namespace' + 'id-ns-lba-format:display information about the namespace capability fields for specific LBA format' + 'list-ns:identify all namespace(s) attached' + 'cmdset-ind-id-ns:display I/O Command Set Independent information about the namespace' + 'id-iocs:display information about I/O command sets' + 'id-domain:display information about domain list' + 'create-ns:create a new namespace before attachment' + 'delete-ns:delete a detached namespace' + 'attach-ns:attach namespace to controller' + 'detach-ns:detach namespace from controller' + 'list-ctrl:identify all controller(s) attached' + 'nvm-id-ctrl:display information about the nvm command set' + 'nvm-id-ns:display information about the namespace of nvm command set' + 'id-ns-lba-format:display information about the namespace of nvm command set capability fields for specific LBA format' + 'list-endgrp:display information about nvme endurance group list' + 'get-ns-id:get namespace id of opened block device' + 'get-log:retrieve any log in raw format' + 'predictable-lat-log:retrieve predictable latency per nvmset log' + 'pred-lat-event-agg-log:retrieve predictable latency event aggregate log' + 'persistent-event-log:retrieve presistent event log' + 'fw-log:retrieve fw log' + 'smart-log:retrieve SMART log' + 'smart-log-add:retrieve additional SMART log' + 'error-log:retrieve error log' + 'endurance-event-agg-log:retrieve endurance group event aggregate log' + 'lba-status-log:retrieve lba status log' + 'resv-notif-log: retrieve reservation notification log' + 'get-feature:display a controller feature' + 'set-feature:set a controller feature and show results' + 'format:apply new block format to namespace' + 'fw-activate:activate a firmware on the device' + 'fw-download:download a firmware to the device' + 'admin-passthru:submit a passthrough IOCTL' + 'io-passthru:submit a passthrough IOCTL' + 'security-send:send security/secure data to controller' + 'security-recv:ask for security/secure data from controller' + 'resv-acquire:acquire reservation on a namespace' + 'resv-register:register reservation on a namespace' + 'resv-release:release reservation on a namespace' + 'resv-report:report reservation on a namespace' + 'copy:submit a simple copy command' + 'flush:submit a flush' + 'compare:compare data on device to data elsewhere' + 'read:submit a read command' + 'write:submit a write command' + 'capacity-mgmt: submit capacity management command' + 'show-regs:shows the controller registers; requires admin character device' + 'boot-part-log: retrieve boot partition log' + 'fid-support-effects-log:retrieve fid support and effects log' + 'supported-log-pages: retrieve support log pages details' + 'lockdown:submit a lockdown command' + 'media-unit-stat-log: retrieve media unit status log pages details' + 'supported-cap-config-log: retrieve support log pages details' + 'show-topology: show subystem topology' + 'help:print brief descriptions of all nvme commands' + ) + + local expl + + _arguments '*:: :->subcmds' && return 0 + + if (( CURRENT == 1 )); then + _describe -t commands "nvme subcommands" _cmds + return + else + case ${words[CURRENT-1]} in + (id-ctrl) + local _idctrl + _idctrl=( + /dev/nvme':supply a device to use (required)' + --raw-binary':dump infos in binary format' + -b':alias of --raw-binary' + --human-readable':show infos in readable format' + -H':alias of --human-readable' + --vendor-specific':also dump binary vendor infos' + -v':alias of --vendor-specific' + ) + + _arguments '*:: :->subcmds' + _describe -t commands "nvme id-ctrl options" _idctrl + ;; + (id-ns) + local _idns + _idns=( + /dev/nvme':supply a device to use (required)' + --namespace-id=':show infos for namespace <nsid>' + -n':alias of --namespace-id' + --raw-binary':dump infos in binary format' + -b':alias of --raw-binary' + --human-readable':show infos in readable format' + -H':alias of --human-readable' + --vendor-specific':also dump binary vendor infos' + -v':alias of --vendor-specific' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme id-ns options" _idns + ;; + (id-ns-lba-format) + local _idns_lba_format + _idns_lba_format=( + /dev/nvme':supply a device to use (required)' + --lba-format-index=':show infos for lba format index <lba-format-index>' + -i':alias of --lba-format-index' + --uuid-index=':uuid index' + -U':alias for --uuid-index' + --output-format=':Output format: normal|json|binary' + -o':alias for --output-format' + --verbose':show infos verbosely' + -v':alias of --verbose' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme id-ns-lba-format options" _idns_lba_format + ;; + (list-ns) + local _listns + _listns=( + /dev/nvme':supply a device to use (required)' + --namespace-id=':start namespace infos listing with this nsid' + -n':alias of --namespace-id' + --csi=':command set identifier' + -y':alias of --csi' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme list-ns options" _listns + ;; + (cmdset-ind-id-ns) + local _cmdset_ind_idns + _cmdset_ind_idns=( + /dev/nvme':supply a device to use (required)' + --namespace-id=':show infos for namespace <nsid>' + -n':alias of --namespace-id' + --raw-binary':dump infos in binary format' + -b':alias of --raw-binary' + --human-readable':show infos in readable format' + -H':alias of --human-readable' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme cmdset-ind-id-ns options" _cmdset_ind_idns + ;; + (id-iocs) + local _idiocs + _idiocs=( + /dev/nvme':supply a device to use (required)' + --controller-id=':show infos for controller <cntid>' + -c':alias of --controller-id' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme id-iocs options" _idiocs + ;; + (id-domain) + local _iddomain + _iddomain=( + /dev/nvme':supply a device to use (required)' + --dom-id=':show infos for domain id <cntid>' + -d':alias of --dom-id' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme id-domain options" _iddomain + ;; + (nvm-id-ctrl) + local _nvmidctrl + _nvmidctrl=( + /dev/nvme':supply a device to use (required)' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme nvm-id-ctrl options" _nvmidctrl + ;; + (nvm-id-ns) + local _nvmidns + _nvmidns=( + /dev/nvme':supply a device to use (required)' + --namespace-id=':show infos for namespace <nsid>' + -n':alias of --namespace-id' + --uuid-index=':uuid index' + -U':alias for --uuid-index' + --output-format=':Output format: normal|json|binary' + -o':alias for --output-format' + --verbose':show infos verbosely' + -v':alias of --verbose' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme nvm-id-ns options" _nvmidns + ;; + (id-ns-lba-format) + local _nvm_idns_lba_format + _nvm_idns_lba_format=( + /dev/nvme':supply a device to use (required)' + --lba-format-index=':show infos for lba format index <lba-format-index>' + -i':alias of --lba-format-index' + --uuid-index=':uuid index' + -U':alias for --uuid-index' + --output-format=':Output format: normal|json|binary' + -o':alias for --output-format' + --verbose':show infos verbosely' + -v':alias of --verbose' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme nvm-id-ns-lba-format options" _nvm_idns_lba_format + ;; + (list-endgrp) + local _listendgrp + _listendgrp=( + /dev/nvme':supply a device to use (required)' + --endgrp-id=':endurance group id' + -i':alias of --endgrp-id' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme list-ns options" _listendgrp + ;; + (create-ns) + local _createns + _createns=( + /dev/nvme':supply a device to use (required)' + --nsze=':namespace size to create' + -s':alias of --nsze' + --ncap=':namespace capacity' + -c':alias of --ncap' + --flbas=':FLBA size' + -f':alias of --flbas' + --dps=':data protection?' + -d':alias of --dps' + --nmic=':multipath and sharing' + -n':alias of --nmic' + --csi=':command set identifier' + -y':alias of --csi' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme create-ns options" _createns + ;; + (delete-ns) + local _deletens + _deletens=( + /dev/nvme':supply a device to use (required)' + --namespace-id=':namespace to delete' + -n':alias of --namespace-id' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme delete-ns options" _deletens + ;; + (attach-ns) + local _attachns + _attachns=( + /dev/nvme':supply a device to use (required)' + --namespace-id=':namespace to attach to the controller' + -n':alias of --namespace-id' + --controllers=':if a device is not provided, supply a comma-sep list of controllers' + -c':alias of --controllers' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme attach-ns options" _attachns + ;; + (detach-ns) + local _detachns + _detachns=( + /dev/nvme':supply a device to use (required)' + --namespace-id=':namespace to detach from controller' + -n':alias of --namespace-id' + --controllers=':if a device is not provided, supply a comma-sep list of controllers' + -c':alias of --controllers' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme detach-ns options" _detachns + ;; + (list-ctrl) + local _listctrl + _listctrl=( + /dev/nvme':supply a device to use (required)' + --namespace-id=':show controllers attached to this namespace' + -n':alias of --namespace-id' + --cntid=':start the list with this controller' + -c':alias of --cntid' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme list-ctrl options" _listctrl + ;; + (get-ns-id) + local _getnsid + _getnsid=( + /dev/nvme':supply a device to use (required)' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme get-ns-id options" _getnsid + ;; + (get-log) + local _getlog + _getlog=( + /dev/nvme':supply a device to use (required)' + --log-id=':requested log number' + -i':alias of --log-id' + --log-len=':number of bytes to show for requested log' + -l':alias of --log-len' + --namespace-id=':get log specific to <nsid> if namespace logs are supported' + -n':alias of --namespace-id' + --raw-binary':dump infos in binary format' + -b':alias of --raw-binary' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme get-log options" _getlog + ;; + (persistent-event-log) + local _persistenteventlog + _persistenteventlog=( + /dev/nvme':supply a device to use (required)' + --action=': action the controller shall take for this log page' + -a':alias to --action' + --log-len=':number of bytes to show for requested log' + -l':alias of --log-len' + --raw-binary':dump infos in binary format' + -b':alias of --raw-binary' + ) + _arguments '*:: :->subcmds' + _describe -t commands "persistent-event-log options" _persistenteventlog + ;; + (pred-lat-event-agg-log) + local _predlateventagglog + _predlateventagglog=( + /dev/nvme':supply a device to use (required)' + --log-entries=': Number of pending NVM Set Entries log list' + -e':alias to --log-entries' + --rae': Retain an Asynchronous Event' + -r':alias to --rae' + --raw-binary':dump infos in binary format' + -b':alias of --raw-binary' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme pred-lat-event-agg-log options" _predlateventagglog + ;; + (predictable-lat-log) + local _predictablelatlog + _predictablelatlog=( + /dev/nvme':supply a device to use (required)' + --nvmset-id=': NVM Set Identifier on which log page retrieve info' + -i':alias to --nvmset-id' + --raw-binary':dump infos in binary format' + -b':alias of --raw-binary' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme predictable-lat-log options" _predictablelatlog + ;; + (fw-log) + local _fwlog + _fwlog=( + /dev/nvme':supply a device to use (required)' + --raw-binary':dump infos in binary format' + -b':alias of --raw-binary' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme fw-log options" _fwlog + ;; + (smart-log) + local _smartlog + _smartlog=( + /dev/nvme':supply a device to use (required)' + --namespace-id=':get SMART log specific to <nsid> if namespace logs are supported' + -n':alias to --namespace-id' + --raw-binary':dump infos in binary format' + -b':alias to --raw-binary' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme smart-log options" _smartlog + ;; + (smart-log-add) + local _add + _add=( + /dev/nvme':supply a device to use (required)' + --namespace-id=':get additional SMART log specific to <nsid> if namespace logs supported' + -n':alias to --namespace-id' + --raw-binary':dump infos in binary format' + -b':alias to --raw-binary' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme smart-log-add options" _add + ;; + (error-log) + local _errlog + _errlog=( + /dev/nvme':supply a device to use (required)' + --namespace-id=':get log specific to <nsid> if namespace logs are supported' + -n':alias to --namespace-id' + --raw-binary':dump infos in binary format' + -b':alias to --raw-binary' + --log-entries=':request n >= 1 log entries' + -e':alias to --log-entries' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme error-log options" _errlog + ;; + (endurance-event-agg-log) + local _enduranceeventagglog + _enduranceeventagglog=( + /dev/nvme':supply a device to use (required)' + --log-entries=': Number of Endurance Group Event Agg Entries log list' + -e':alias to --log-entries' + --rae': Retain an Asynchronous Event' + -r':alias to --rae' + --raw-binary':dump infos in binary format' + -b':alias of --raw-binary' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme endurance-event-agg-log options" _enduranceeventagglog + ;; + (lba-status-log) + local _lbastatuslog + _lbastatuslog=( + /dev/nvme':supply a device to use (required)' + --rae': Retain an Asynchronous Event' + -r':alias to --rae' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme lba-status-log options" _lbastatuslog + ;; + (resv-notif-log) + local _resvnotiflog + _resvnotiflog=( + /dev/nvme':supply a device to use (required)' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme resv-notif-log options" _resvnotiflog + ;; + (boot-part-log) + local _bootpartlog + _bootpartlog=( + /dev/nvme':supply a device to use (required)' + --lsp=': log specific field' + -s':alias to --lsp' + --output-file=': boot partition data output write' + -f':alias for --output-file' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme boot-part-log options" _bootpartlog + ;; + (get-feature) + local _getf + _getf=( + /dev/nvme':supply a device to use (required)' + --namespace-id=':get feature specific to <nsid>' + -n':alias to --namespace-id' + --feature-id=':hexadecimal name of feature to examine (required)' + -f':alias to --feature-id' + --sel=':select from 0 - current, 1 - default, 2 - saved, 3 - supported' + -s':alias to --sel' + --data-len=':buffer len for returned LBA Type Range or host identifier data' + -l':alias for --data-len' + --uuid-index=':uuid index' + -U':alias for --uuid-index' + --cdw11=':dword 11 value, used for interrupt vector configuration only' + --raw-binary':dump infos in binary format' + -b':alias to --raw-binary' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme get-feature options" _getf + ;; + (lockdown) + local _lockdown + _lockdown=( + /dev/nvme':supply a device to use (required)' + --ofi=': Opcode or Feature Identifier(OFI) (required)' + -o':alias of --ofi' + --ifc=':Interface (INF) field Information (required)' + -f':alias of --ifc' + --prhbt=':Prohibit(PRHBT) bit field (required)' + -p':alias of --prhbt' + --scp=':Scope(SCP) field for identifying opcode or feature id (required)' + -s':alias of --scp' + --uuid=':UUID Index field required aligned with Scope' + -U':alias of --uuid' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme lockdown options" _lockdown + ;; + (set-feature) + local _setf + _setf=( + /dev/nvme':supply a device to use (required)' + --namespace-id=':feature is specific to <nsid>' + -n':alias to --namespace-id' + --feature-id=':hexadecimal name of feature to set (required)' + -f':alias to --feature-id' + --data-len=':buffer length, only used for LBA Type Range or host identifier data' + -l':alias for --data-len' + --data=':data file for LBA Type Range or host identifier buffer (defaults to stdin)' + -d':alias to --data' + --value=':new value of feature (required)' + -v'alias to --value' + --uuid-index=':uuid index' + -U':alias for --uuid-index' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme set-feature options" _setf + ;; + (format) + local _format + _format=( + /dev/nvme':supply a device to use (required)' + --namespace-id=':<nsid> of namespace to format (required)' + -n':alias of --namespace-id' + --lbaf=':LBA format to apply to namespace (required)' + -l':alias of --lbaf' + --ses=':secure erase? 0 - no-op (default), 1 - user-data erase, 2 - cryptographic erase' + -s':alias of --ses' + --pil=':location of protection information? 0 - end, 1 - start' + -p':alias of --pil' + --pi=':protection information? 0 - off, 1 - Type 1 on, 2 - Type 2 on, 3 - Type 3 on' + -i':alias of --pi' + --ms=':extended format? 0 - off (metadata in separate buffer), 1 - on (extended LBA used)' + -m':alias of --ms' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme format options" _format + ;; + (fw-activate) + local _fwact + _fwact=( + /dev/nvme':supply a device to use (required)' + --action=':activation action (required)? 0 - replace fw without activating, 1 - replace with activation, 2 - replace with activation at next reset' + -a':alias of --action' + --slot=':firmware slot to activate' + -s':alias of --slot' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme fw-activate options" _fwact + ;; + (fw-download) + local _fwd + _fwd=( + /dev/nvme':supply a device to use (required)' + --fw=':firmware file to download (required)' + -f':alias of --fw' + --xfer=':limit on chunk-size of transfer (if device has download size limit)' + -x':alias of --xfer' + --offset=':starting offset, in dwords (defaults to 0, only useful if download is split across multiple files)' + -o':alias of --offset' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme fw-download options" _fwd + ;; + (capacity-mgmt) + local _fwd + _fwd=( + /dev/nvme':supply a device to use (required)' + --operation=':Operation to be performed by the controller' + -o':alias of --operation' + --element-id=':specific to the value of the Operation field' + -i':alias of --element-id' + --cap-lower=':Least significant 32 bits of the capacity in bytes' + -l':alias of --cap-lower' + --cap-upper=':Most significant 32 bits of the capacity in bytes' + -u':alias of --cap-upper' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme capacity-mgmt options" _fwd + ;; + (supported-log-pages) + local _support + _support=( + /dev/nvme':supply a device to use (required)' + --human-readable':show infos in readable format' + -H':alias of --human-readable' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme supported-log-pages options" _support + ;; + (media-unit-stat-log) + local _medialog + _medialog=( + /dev/nvme':supply a device to use (required)' + --dom-id=':show infos for domain id' + -d':alias of --dom-id' + --raw-binary':dump infos in binary format' + -b':alias of --raw-binary' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme media-unit-stat-log" _medialog + ;; + (supported-cap-config-log) + local _caplog + _caplog=( + /dev/nvme':supply a device to use (required)' + --dom-id=':show infos for domain id' + -d':alias of --dom-id' + --raw-binary':dump infos in binary format' + -b':alias of --raw-binary' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme supported-cap-config-log" _caplog + ;; + (admin-passthru) + local _admin + _admin=( + /dev/nvme':supply a device to use (required)' + --opcode=':hexadecimal opcode to send (required)' + -o':alias of --opcode' + --flags=':command flags' + -f':alias of --flags' + --rsvd=':value for reserved field' + -R':alias of --rsvd' + --namespace-id=':value for nsid' + -n':alias of --namespace-id' + --data-len=':length for data buffer' + -l':alias of --data-len' + --metadata-len=':length for metadata buffer' + -m':alias of --metadata-len' + --timeout=':value for timeout' + -t':alias of --timeout' + --cdw2=':value for command dword 2' + -2':alias for --cdw2' + --cdw3=':value for command dword 3' + -3':alias for --cdw3' + --cdw10=':value for command dword 10' + -4':alias for --cdw10' + --cdw11=':value for command dword 11' + -5':alias for --cdw11' + --cdw12=':value for command dword 12' + -6':alias for --cdw12' + --cdw13=':value for command dword 13' + -7':alias for --cdw13' + --cdw14=':value for command dword 14' + -8':alias for command dword 14' + --cdw15=':value for command dword 15' + -9':alias for command dword 15' + --input-file=':defaults to stdin; input for write (send direction)' + -i':alias for --input-file' + --raw-binary':dump output in binary format' + -b':alias for --raw-binary' + --show-command':simply print command instead of sending it to <device>' + -s':alias for --show-command' + --dry-run':alias for --show-command' + -d':alias for --show-command' + --read':set dataflow direction to receive' + -r':alias for --read' + --write':set dataflow direction to send' + -w':alias for --write' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme admin-passthru options" _admin + ;; + (io-passthru) + local _io + _io=( + /dev/nvme':supply a device to use (required)' + --opcode=':hexadecimal opcode to send (required)' + -o':alias of --opcode' + --flags=':command flags' + -f':alias of --flags' + --rsvd=':value for reserved field' + -R':alias of --rsvd' + --namespace-id=':value for nsid' + -n':alias of --namespace-id' + --data-len=':length for data buffer' + -l':alias of --data-len' + --metadata-len=':length for metadata buffer' + -m':alias of --metadata-len' + --timeout=':value for timeout' + -t':alias of --timeout' + --cdw2=':value for command dword 2' + -2':alias for --cdw2' + --cdw3=':value for command dword 3' + -3':alias for --cdw3' + --cdw10=':value for command dword 10' + -4':alias for --cdw10' + --cdw11=':value for command dword 11' + -5':alias for --cdw11' + --cdw12=':value for command dword 12' + -6':alias for --cdw12' + --cdw13=':value for command dword 13' + -7':alias for --cdw13' + --cdw14=':value for command dword 14' + -8':alias for command dword 14' + --cdw15=':value for command dword 15' + -9':alias for command dword 15' + --input-file=':defaults to stdin; input for write (send direction)' + -i':alias for --input-file' + --raw-binary':dump output in binary format' + -b':alias for --raw-binary' + --show-command':simply print command instead of sending it to <device>' + -s':alias for --show-command' + --dry-run':alias for --show-command' + -d':alias for --show-command' + --read':set dataflow direction to receive' + -r':alias for --read' + --write':set dataflow direction to send' + -w':alias for --write' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme io-passthru options" _io + ;; + (security-send) + local _ssend + _ssend=( + /dev/nvme':supply a device to use (required)' + --file=':payload' + -f':alias for --file' + --secp=':security protocol as defined in SPC-4' + -p':alias for --secp' + --spsp=':send security-protocol-specific data as defined in SPC-4' + -s':alias for --spsp' + --tl=':transfer length as defined in SPC-4' + -t':alias for --tl' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme security-send options" _ssend + ;; + (security-recv) + local _srecv + _srecv=( + /dev/nvme':supply a device to use (required)' + --secp=':security protocol as defined in SPC-4' + -p':alias for --secp' + --spsp=':send security-protocol-specific data as defined in SPC-4' + -s':alias for --spsp' + --size=':size of buffer (prints to stdout on successful recv)' + -x':alias for --size' + --al=':allocation length as defined in SPC-4' + -a':alias for --al' + --raw-binary':dump output in binary format' + -b':alias for --raw-binary' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme security-recv options" _srecv + ;; + (resv-acquire) + local _acq + _acq=( + /dev/nvme':supply a device to use (required)' + --namespace-id=':<nsid> of namespace to try to reserve (required)' + -n':alias for --namespace-id' + --prkey=':pre-empt reservation key' + -p':alias for --prkey' + --rtype=':hexadecimal reservation type' + -t':alias for --rtype' + --racqa=':reservation acquire action' + -a':alias for --racqa' + --iekey=':ignore existing reservation key' + -i':alias for --iekey' + --crkey':current reservation key' + -c':alias for --crkey' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme resv-acquire options" _acq + ;; + (resv-release) + local _rel + _rel=( + /dev/nvme':supply a device to use (required)' + --namespace-id=':nsid' + -n':alias of --namespace-id' + --rtype=':hexadecimal reservation type' + -t':alias of --rtype' + --rrela=':reservation release action' + -a':alias of --rrela' + --iekey':ignore existing reservation key' + -i':alias of --iekey' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme resv-release options" _rel + ;; + (resv-report) + local _rep + _rep=( + /dev/nvme':supply a device to use (required)' + --namespace-id=':nsid' + -n':alias of --namespace-id' + --numd=':number of dwords of reservation status to xfer' + -d':alias of --numd' + --eds':request extended data structure' + -e':alias of --eds' + --raw-binary':dump output in binary format' + -b':alias of --raw-binary' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme resv-report options" _rep + ;; + (resv-register) + local _reg + _reg=( + /dev/nvme':supply a device to use (required)' + --namespace-id=':nsid' + -n':alias of --namespace-id' + --crkey=':current reservation key' + -c'alias of --crkey' + --nrkey=':new reservation key' + -k':alias of --nrkey' + --cptpl=':change persistence through power loss setting' + -p':alias for --cptpl' + --rrega=':reservation registration action to perform' + -r':alias for --rrega' + --iekey':ignore existing reservation key' + -i':alias for --iekey' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme resv-register options" _reg + ;; + (copy) + local _copy + _copy=( + /dev/nvme':supply a device to use (required)' + --sdlba=':64-bit addr of first destination logical block' + -d':alias of --sdlba' + --slbs=':64-bit addr of first block per range (comma-separated list)' + -s':alias of --slbs' + --blocks=':number of blocks per range (comma-separated list, zeroes-based values)' + -b':alias of --blocks' + --limited-retry':if included, controller should try less hard to retrieve data from media (if not included, all available data recovery means used)' + -l':alias of --limited-retry' + --force-unit-access':if included, the data shall be read from non-volatile media' + -f':alias of --force-unit access' + --prinfow=':protection information and check field (write part)' + -p':alias of --prinfow' + --prinfor=':protection information and check field (read part)' + -P':alias of --prinfor' + --ref-tag=':initial lba reference tag (write part)' + -r':alias of --ref-tag' + --expected-ref-tags=':expected lba reference tags (read part, comma-separated list)' + -R':alias of --expected-ref-tags' + --app-tag=':lba application tag (write part)' + -a':alias of --app-tag' + --expected-app-tags=':expected lba application tags (read part, comma-separated list)' + -A':alias of --expected-app-tags' + --app-tag-mask=':lba application tag mask (write part)' + -m':alias of --app-tag-mask' + --expected-app-tag-masks=':expected lba application tag masks (read part, comma-separated list)' + -M':alias of --expected-app-tag-masks' + --dir-type':directive type (write part)' + -T':alias of --dir-type' + --dir-spec':directive specific (write part)' + -S':alias of --dir-spec' + --format':source range entry format' + -F':alias of --format' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme copy options" _copy + ;; + (flush) + local _flush + _flush=( + /dev/nvme':supply a device to use (required)' + --namespace-id=':nsid' + -n':alias of --namespace-id' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme flush options" _flush + ;; + (compare) + local _comp + _comp=( + /dev/nvme':supply a device to use (required)' + --start-block=':begin compare at this 64-bit LBA on device' + -s':alias of --start-block' + --block-count=':number of logical blocks on device to compare to local data' + -c':alias of --block-count' + --metadata-size=':number of bytes of metadata to compare' + -y':alias of --metadata-size' + --data-size=':size of local data buffer in bytes' + -z':alias of --data-size' + --data=':local data file to compare to blocks on device' + -d':alias of --data' + --prinfo=':protection information action and check field' + -p':alias of --prinfo' + --app-tag-mask=':application tag mask (for end to end PI)' + -m':alias of --app-tag-mask' + --app-tag=':application tag (for end to end PI)' + -a':alias of --app-tag' + --limited-retry':if included, controller should try less hard to retrieve data from media (if not included, all available data recovery means used)' + -l':alias of --limited-retry' + --force-unit-access':if included, the data shall be read from non-volatile media' + -f':alias of --force-unit access' + --show-command':show command instead of sending to device' + -v':alias of --show-command' + --dry-run':show command instead of sending to device' + -w':alias of --show-command' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme compare options" _comp + ;; + (read) + local _read + _read=( + /dev/nvme':supply a device to use (required)' + --start-block=':64-bit address of the first logical block to be read' + -s':alias of --start-block' + --block-count=':number of logical blocks on device to read' + -c':alias of --block-count' + --data-size=':size of data to be read' + -z':alias of --data-size' + --metadata-size=':size of metadata to be read' + -y':alias of --metadata-size' + --ref-tag=':reference tag (for end to end PI)' + -r':alias of --ref-tag' + --data=':file into which data should be read (defaults to stdout)' + -d':alias of --data' + --prinfo=':protection information and check field' + -p':alias of --prinfo' + --app-tag-mask=':application tag mask (for end to end PI)' + -m':alias of --app-tag-mask' + --app-tag=':application tag (for end to end PI)' + -a':alias of --app-tag' + --limited-retry=':if included, controller should try less hard to retrieve data from media (if not included, all available data-recovery means used)' + -l':alias of --limited-retry' + --latency':latency statistics will be output following read' + -t':alias of --latency' + --force-unit-access':data read shall be returned from nonvolatile media before command completion is indicated' + -f':alias of --force-unit-access' + --show-command':show command instead of sending to device' + -v':alias of --show-command' + --dry-run':show command instead of sending to device' + -w':alias of --show-command' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme read options" _read + ;; + (write) + local _wr + _wr=( + /dev/nvme':supply a device to use (required)' + --start-block=':64-bit address of the first logical block to be written' + -s':alias of --start-block' + --block-count=':number of logical blocks on device to write' + -c':alias of --block-count' + --data-size=':size of data to be written' + -z':alias of --data-size' + --metadata-size=':size of metadata to be written' + -y':alias of --metadata-size' + --ref-tag=':reference tag (for end to end PI)' + -r':alias of --ref-tag' + --data=':file from which data should be written to device (defaults to stdin)' + -d':alias of --data' + --prinfo=':protection information and check field' + -p':alias of --prinfo' + --app-tag-mask=':application tag mask (for end to end PI)' + -m':alias of --app-tag-mask' + --app-tag=':application tag (for end to end PI)' + -a':alias of --app-tag' + --limited-retry=':if included, controller should try less hard to send data to media (if not included, all available data-recovery means used)' + -l':alias of --limited-retry' + --latency':latency statistics will be output following write' + -t':alias of --latency' + --force-unit-access':data shall be written to nonvolatile media before command completion is indicated' + -f':alias of --force-unit-access' + --show-command':show command instead of sending to device' + -v':alias of --show-command' + --dry-run':show command instead of sending to device' + -w':alias of --show-command' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme write options" _wr + ;; + (show-regs) + local _shor + _shor=( + /dev/nvme':supply a device to use (required)' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme show-regs options" _shor + ;; + (fid-support-effects-log) + local _fidsupporteffectslog + _fidsupporteffectslog=( + /dev/nvme':supply a device to use (required)' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme fid-support-effects-log options" _fidsupporteffectslog + ;; + (show-topology) + local _showtopology + _showtopology=( + --output-format=':Output format: normal|json|binary' + -o':alias for --output-format' + --verbose':show infos verbosely' + -v':alias of --verbose' + --ranking=':Ranking order: namespace|ctrl' + -r':alias for --ranking' + ) + _arguments '*:: :->subcmds' + _describe -t commands "nvme show-topology options" _showtopology + ;; + (help) + local _h + _h=( id-ctrl id-ns list-ns id-iocs create-ns delete-ns attach-ns detach-ns + list-ctrl get-ns-id get-log fw-log smart-log error-log get-feature + set-feature format fw-activate fw-download admin-passthru io-passthru + security-send security-recv resv-acquire resv-register resv-release + resv-report flush compare read write copy show-regs persistent-event-log + pred-lat-event-agg-log nvm-id-ctrl endurance-event-agg-log lba-status-log + resv-notif-log capacity-mgmt id-domain boot-part-log fid-support-effects-log + supported-log-pages lockdown media-unit-stat-log id-ns-lba-format nvm-id-ns + nvm-id-ns-lba-format supported-cap-config-log show-topology + ) + _arguments '*:: :->subcmds' + _describe -t commands "help: infos on a specific nvme command, or provide no option to see a synopsis of all nvme commands" _h + ;; + (*) + _files + ;; + esac + return + fi + + _files +} |