summaryrefslogtreecommitdiffstats
path: root/sshd.8
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--sshd.81030
1 files changed, 1030 insertions, 0 deletions
diff --git a/sshd.8 b/sshd.8
new file mode 100644
index 0000000..bace978
--- /dev/null
+++ b/sshd.8
@@ -0,0 +1,1030 @@
+.\"
+.\" Author: Tatu Ylonen <ylo@cs.hut.fi>
+.\" Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
+.\" All rights reserved
+.\"
+.\" As far as I am concerned, the code I have written for this software
+.\" can be used freely for any purpose. Any derived versions of this
+.\" software must be clearly marked as such, and if the derived work is
+.\" incompatible with the protocol description in the RFC file, it must be
+.\" called by a name other than "ssh" or "Secure Shell".
+.\"
+.\" Copyright (c) 1999,2000 Markus Friedl. All rights reserved.
+.\" Copyright (c) 1999 Aaron Campbell. All rights reserved.
+.\" Copyright (c) 1999 Theo de Raadt. All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+.\"
+.\" $OpenBSD: sshd.8,v 1.322 2023/01/18 01:50:21 millert Exp $
+.Dd $Mdocdate: January 18 2023 $
+.Dt SSHD 8
+.Os
+.Sh NAME
+.Nm sshd
+.Nd OpenSSH daemon
+.Sh SYNOPSIS
+.Nm sshd
+.Bk -words
+.Op Fl 46DdeiqTtV
+.Op Fl C Ar connection_spec
+.Op Fl c Ar host_certificate_file
+.Op Fl E Ar log_file
+.Op Fl f Ar config_file
+.Op Fl g Ar login_grace_time
+.Op Fl h Ar host_key_file
+.Op Fl o Ar option
+.Op Fl p Ar port
+.Op Fl u Ar len
+.Ek
+.Sh DESCRIPTION
+.Nm
+(OpenSSH Daemon) is the daemon program for
+.Xr ssh 1 .
+It provides secure encrypted communications between two untrusted hosts
+over an insecure network.
+.Pp
+.Nm
+listens for connections from clients.
+It is normally started at boot from
+.Pa /etc/rc .
+It forks a new
+daemon for each incoming connection.
+The forked daemons handle
+key exchange, encryption, authentication, command execution,
+and data exchange.
+.Pp
+.Nm
+can be configured using command-line options or a configuration file
+(by default
+.Xr sshd_config 5 ) ;
+command-line options override values specified in the
+configuration file.
+.Nm
+rereads its configuration file when it receives a hangup signal,
+.Dv SIGHUP ,
+by executing itself with the name and options it was started with, e.g.\&
+.Pa /usr/sbin/sshd .
+.Pp
+The options are as follows:
+.Bl -tag -width Ds
+.It Fl 4
+Forces
+.Nm
+to use IPv4 addresses only.
+.It Fl 6
+Forces
+.Nm
+to use IPv6 addresses only.
+.It Fl C Ar connection_spec
+Specify the connection parameters to use for the
+.Fl T
+extended test mode.
+If provided, any
+.Cm Match
+directives in the configuration file that would apply are applied before the
+configuration is written to standard output.
+The connection parameters are supplied as keyword=value pairs and may be
+supplied in any order, either with multiple
+.Fl C
+options or as a comma-separated list.
+The keywords are
+.Dq addr ,
+.Dq user ,
+.Dq host ,
+.Dq laddr ,
+.Dq lport ,
+and
+.Dq rdomain
+and correspond to source address, user, resolved source host name,
+local address, local port number and routing domain respectively.
+.It Fl c Ar host_certificate_file
+Specifies a path to a certificate file to identify
+.Nm
+during key exchange.
+The certificate file must match a host key file specified using the
+.Fl h
+option or the
+.Cm HostKey
+configuration directive.
+.It Fl D
+When this option is specified,
+.Nm
+will not detach and does not become a daemon.
+This allows easy monitoring of
+.Nm sshd .
+.It Fl d
+Debug mode.
+The server sends verbose debug output to standard error,
+and does not put itself in the background.
+The server also will not
+.Xr fork 2
+and will only process one connection.
+This option is only intended for debugging for the server.
+Multiple
+.Fl d
+options increase the debugging level.
+Maximum is 3.
+.It Fl E Ar log_file
+Append debug logs to
+.Ar log_file
+instead of the system log.
+.It Fl e
+Write debug logs to standard error instead of the system log.
+.It Fl f Ar config_file
+Specifies the name of the configuration file.
+The default is
+.Pa /etc/ssh/sshd_config .
+.Nm
+refuses to start if there is no configuration file.
+.It Fl g Ar login_grace_time
+Gives the grace time for clients to authenticate themselves (default
+120 seconds).
+If the client fails to authenticate the user within
+this many seconds, the server disconnects and exits.
+A value of zero indicates no limit.
+.It Fl h Ar host_key_file
+Specifies a file from which a host key is read.
+This option must be given if
+.Nm
+is not run as root (as the normal
+host key files are normally not readable by anyone but root).
+The default is
+.Pa /etc/ssh/ssh_host_ecdsa_key ,
+.Pa /etc/ssh/ssh_host_ed25519_key
+and
+.Pa /etc/ssh/ssh_host_rsa_key .
+It is possible to have multiple host key files for
+the different host key algorithms.
+.It Fl i
+Specifies that
+.Nm
+is being run from
+.Xr inetd 8 .
+.It Fl o Ar option
+Can be used to give options in the format used in the configuration file.
+This is useful for specifying options for which there is no separate
+command-line flag.
+For full details of the options, and their values, see
+.Xr sshd_config 5 .
+.It Fl p Ar port
+Specifies the port on which the server listens for connections
+(default 22).
+Multiple port options are permitted.
+Ports specified in the configuration file with the
+.Cm Port
+option are ignored when a command-line port is specified.
+Ports specified using the
+.Cm ListenAddress
+option override command-line ports.
+.It Fl q
+Quiet mode.
+Nothing is sent to the system log.
+Normally the beginning,
+authentication, and termination of each connection is logged.
+.It Fl T
+Extended test mode.
+Check the validity of the configuration file, output the effective configuration
+to stdout and then exit.
+Optionally,
+.Cm Match
+rules may be applied by specifying the connection parameters using one or more
+.Fl C
+options.
+.It Fl t
+Test mode.
+Only check the validity of the configuration file and sanity of the keys.
+This is useful for updating
+.Nm
+reliably as configuration options may change.
+.It Fl u Ar len
+This option is used to specify the size of the field
+in the
+.Vt utmp
+structure that holds the remote host name.
+If the resolved host name is longer than
+.Ar len ,
+the dotted decimal value will be used instead.
+This allows hosts with very long host names that
+overflow this field to still be uniquely identified.
+Specifying
+.Fl u0
+indicates that only dotted decimal addresses
+should be put into the
+.Pa utmp
+file.
+.Fl u0
+may also be used to prevent
+.Nm
+from making DNS requests unless the authentication
+mechanism or configuration requires it.
+Authentication mechanisms that may require DNS include
+.Cm HostbasedAuthentication
+and using a
+.Cm from="pattern-list"
+option in a key file.
+Configuration options that require DNS include using a
+USER@HOST pattern in
+.Cm AllowUsers
+or
+.Cm DenyUsers .
+.It Fl V
+Display the version number and exit.
+.El
+.Sh AUTHENTICATION
+The OpenSSH SSH daemon supports SSH protocol 2 only.
+Each host has a host-specific key,
+used to identify the host.
+Whenever a client connects, the daemon responds with its public
+host key.
+The client compares the
+host key against its own database to verify that it has not changed.
+Forward secrecy is provided through a Diffie-Hellman key agreement.
+This key agreement results in a shared session key.
+The rest of the session is encrypted using a symmetric cipher.
+The client selects the encryption algorithm
+to use from those offered by the server.
+Additionally, session integrity is provided
+through a cryptographic message authentication code (MAC).
+.Pp
+Finally, the server and the client enter an authentication dialog.
+The client tries to authenticate itself using
+host-based authentication,
+public key authentication,
+challenge-response authentication,
+or password authentication.
+.Pp
+Regardless of the authentication type, the account is checked to
+ensure that it is accessible. An account is not accessible if it is
+locked, listed in
+.Cm DenyUsers
+or its group is listed in
+.Cm DenyGroups
+\&. The definition of a locked account is system dependent. Some platforms
+have their own account database (eg AIX) and some modify the passwd field (
+.Ql \&*LK\&*
+on Solaris and UnixWare,
+.Ql \&*
+on HP-UX, containing
+.Ql Nologin
+on Tru64,
+a leading
+.Ql \&*LOCKED\&*
+on FreeBSD and a leading
+.Ql \&!
+on most Linuxes).
+If there is a requirement to disable password authentication
+for the account while allowing still public-key, then the passwd field
+should be set to something other than these values (eg
+.Ql NP
+or
+.Ql \&*NP\&*
+).
+.Pp
+If the client successfully authenticates itself, a dialog for
+preparing the session is entered.
+At this time the client may request
+things like allocating a pseudo-tty, forwarding X11 connections,
+forwarding TCP connections, or forwarding the authentication agent
+connection over the secure channel.
+.Pp
+After this, the client either requests an interactive shell or execution
+or a non-interactive command, which
+.Nm
+will execute via the user's shell using its
+.Fl c
+option.
+The sides then enter session mode.
+In this mode, either side may send
+data at any time, and such data is forwarded to/from the shell or
+command on the server side, and the user terminal in the client side.
+.Pp
+When the user program terminates and all forwarded X11 and other
+connections have been closed, the server sends command exit status to
+the client, and both sides exit.
+.Sh LOGIN PROCESS
+When a user successfully logs in,
+.Nm
+does the following:
+.Bl -enum -offset indent
+.It
+If the login is on a tty, and no command has been specified,
+prints last login time and
+.Pa /etc/motd
+(unless prevented in the configuration file or by
+.Pa ~/.hushlogin ;
+see the
+.Sx FILES
+section).
+.It
+If the login is on a tty, records login time.
+.It
+Checks
+.Pa /etc/nologin ;
+if it exists, prints contents and quits
+(unless root).
+.It
+Changes to run with normal user privileges.
+.It
+Sets up basic environment.
+.It
+Reads the file
+.Pa ~/.ssh/environment ,
+if it exists, and users are allowed to change their environment.
+See the
+.Cm PermitUserEnvironment
+option in
+.Xr sshd_config 5 .
+.It
+Changes to user's home directory.
+.It
+If
+.Pa ~/.ssh/rc
+exists and the
+.Xr sshd_config 5
+.Cm PermitUserRC
+option is set, runs it; else if
+.Pa /etc/ssh/sshrc
+exists, runs
+it; otherwise runs
+.Xr xauth 1 .
+The
+.Dq rc
+files are given the X11
+authentication protocol and cookie in standard input.
+See
+.Sx SSHRC ,
+below.
+.It
+Runs user's shell or command.
+All commands are run under the user's login shell as specified in the
+system password database.
+.El
+.Sh SSHRC
+If the file
+.Pa ~/.ssh/rc
+exists,
+.Xr sh 1
+runs it after reading the
+environment files but before starting the user's shell or command.
+It must not produce any output on stdout; stderr must be used
+instead.
+If X11 forwarding is in use, it will receive the "proto cookie" pair in
+its standard input (and
+.Ev DISPLAY
+in its environment).
+The script must call
+.Xr xauth 1
+because
+.Nm
+will not run xauth automatically to add X11 cookies.
+.Pp
+The primary purpose of this file is to run any initialization routines
+which may be needed before the user's home directory becomes
+accessible; AFS is a particular example of such an environment.
+.Pp
+This file will probably contain some initialization code followed by
+something similar to:
+.Bd -literal -offset 3n
+if read proto cookie && [ -n "$DISPLAY" ]; then
+ if [ `echo $DISPLAY | cut -c1-10` = 'localhost:' ]; then
+ # X11UseLocalhost=yes
+ echo add unix:`echo $DISPLAY |
+ cut -c11-` $proto $cookie
+ else
+ # X11UseLocalhost=no
+ echo add $DISPLAY $proto $cookie
+ fi | xauth -q -
+fi
+.Ed
+.Pp
+If this file does not exist,
+.Pa /etc/ssh/sshrc
+is run, and if that
+does not exist either, xauth is used to add the cookie.
+.Sh AUTHORIZED_KEYS FILE FORMAT
+.Cm AuthorizedKeysFile
+specifies the files containing public keys for
+public key authentication;
+if this option is not specified, the default is
+.Pa ~/.ssh/authorized_keys
+and
+.Pa ~/.ssh/authorized_keys2 .
+Each line of the file contains one
+key (empty lines and lines starting with a
+.Ql #
+are ignored as
+comments).
+Public keys consist of the following space-separated fields:
+options, keytype, base64-encoded key, comment.
+The options field is optional.
+The supported key types are:
+.Pp
+.Bl -item -compact -offset indent
+.It
+sk-ecdsa-sha2-nistp256@openssh.com
+.It
+ecdsa-sha2-nistp256
+.It
+ecdsa-sha2-nistp384
+.It
+ecdsa-sha2-nistp521
+.It
+sk-ssh-ed25519@openssh.com
+.It
+ssh-ed25519
+.It
+ssh-dss
+.It
+ssh-rsa
+.El
+.Pp
+The comment field is not used for anything (but may be convenient for the
+user to identify the key).
+.Pp
+Note that lines in this file can be several hundred bytes long
+(because of the size of the public key encoding) up to a limit of
+8 kilobytes, which permits RSA keys up to 16 kilobits.
+You don't want to type them in; instead, copy the
+.Pa id_dsa.pub ,
+.Pa id_ecdsa.pub ,
+.Pa id_ecdsa_sk.pub ,
+.Pa id_ed25519.pub ,
+.Pa id_ed25519_sk.pub ,
+or the
+.Pa id_rsa.pub
+file and edit it.
+.Pp
+.Nm
+enforces a minimum RSA key modulus size of 1024 bits.
+.Pp
+The options (if present) consist of comma-separated option
+specifications.
+No spaces are permitted, except within double quotes.
+The following option specifications are supported (note
+that option keywords are case-insensitive):
+.Bl -tag -width Ds
+.It Cm agent-forwarding
+Enable authentication agent forwarding previously disabled by the
+.Cm restrict
+option.
+.It Cm cert-authority
+Specifies that the listed key is a certification authority (CA) that is
+trusted to validate signed certificates for user authentication.
+.Pp
+Certificates may encode access restrictions similar to these key options.
+If both certificate restrictions and key options are present, the most
+restrictive union of the two is applied.
+.It Cm command="command"
+Specifies that the command is executed whenever this key is used for
+authentication.
+The command supplied by the user (if any) is ignored.
+The command is run on a pty if the client requests a pty;
+otherwise it is run without a tty.
+If an 8-bit clean channel is required,
+one must not request a pty or should specify
+.Cm no-pty .
+A quote may be included in the command by quoting it with a backslash.
+.Pp
+This option might be useful
+to restrict certain public keys to perform just a specific operation.
+An example might be a key that permits remote backups but nothing else.
+Note that the client may specify TCP and/or X11
+forwarding unless they are explicitly prohibited, e.g. using the
+.Cm restrict
+key option.
+.Pp
+The command originally supplied by the client is available in the
+.Ev SSH_ORIGINAL_COMMAND
+environment variable.
+Note that this option applies to shell, command or subsystem execution.
+Also note that this command may be superseded by a
+.Xr sshd_config 5
+.Cm ForceCommand
+directive.
+.Pp
+If a command is specified and a forced-command is embedded in a certificate
+used for authentication, then the certificate will be accepted only if the
+two commands are identical.
+.It Cm environment="NAME=value"
+Specifies that the string is to be added to the environment when
+logging in using this key.
+Environment variables set this way
+override other default environment values.
+Multiple options of this type are permitted.
+Environment processing is disabled by default and is
+controlled via the
+.Cm PermitUserEnvironment
+option.
+.It Cm expiry-time="timespec"
+Specifies a time after which the key will not be accepted.
+The time may be specified as a YYYYMMDD[Z] date or a YYYYMMDDHHMM[SS][Z] time.
+Dates and times will be interpreted in the system time zone unless suffixed
+by a Z character, in which case they will be interpreted in the UTC time zone.
+.It Cm from="pattern-list"
+Specifies that in addition to public key authentication, either the canonical
+name of the remote host or its IP address must be present in the
+comma-separated list of patterns.
+See PATTERNS in
+.Xr ssh_config 5
+for more information on patterns.
+.Pp
+In addition to the wildcard matching that may be applied to hostnames or
+addresses, a
+.Cm from
+stanza may match IP addresses using CIDR address/masklen notation.
+.Pp
+The purpose of this option is to optionally increase security: public key
+authentication by itself does not trust the network or name servers or
+anything (but the key); however, if somebody somehow steals the key, the key
+permits an intruder to log in from anywhere in the world.
+This additional option makes using a stolen key more difficult (name
+servers and/or routers would have to be compromised in addition to
+just the key).
+.It Cm no-agent-forwarding
+Forbids authentication agent forwarding when this key is used for
+authentication.
+.It Cm no-port-forwarding
+Forbids TCP forwarding when this key is used for authentication.
+Any port forward requests by the client will return an error.
+This might be used, e.g. in connection with the
+.Cm command
+option.
+.It Cm no-pty
+Prevents tty allocation (a request to allocate a pty will fail).
+.It Cm no-user-rc
+Disables execution of
+.Pa ~/.ssh/rc .
+.It Cm no-X11-forwarding
+Forbids X11 forwarding when this key is used for authentication.
+Any X11 forward requests by the client will return an error.
+.It Cm permitlisten="[host:]port"
+Limit remote port forwarding with the
+.Xr ssh 1
+.Fl R
+option such that it may only listen on the specified host (optional) and port.
+IPv6 addresses can be specified by enclosing the address in square brackets.
+Multiple
+.Cm permitlisten
+options may be applied separated by commas.
+Hostnames may include wildcards as described in the PATTERNS section in
+.Xr ssh_config 5 .
+A port specification of
+.Cm *
+matches any port.
+Note that the setting of
+.Cm GatewayPorts
+may further restrict listen addresses.
+Note that
+.Xr ssh 1
+will send a hostname of
+.Dq localhost
+if a listen host was not specified when the forwarding was requested, and
+that this name is treated differently to the explicit localhost addresses
+.Dq 127.0.0.1
+and
+.Dq ::1 .
+.It Cm permitopen="host:port"
+Limit local port forwarding with the
+.Xr ssh 1
+.Fl L
+option such that it may only connect to the specified host and port.
+IPv6 addresses can be specified by enclosing the address in square brackets.
+Multiple
+.Cm permitopen
+options may be applied separated by commas.
+No pattern matching or name lookup is performed on the
+specified hostnames, they must be literal host names and/or addresses.
+A port specification of
+.Cm *
+matches any port.
+.It Cm port-forwarding
+Enable port forwarding previously disabled by the
+.Cm restrict
+option.
+.It Cm principals="principals"
+On a
+.Cm cert-authority
+line, specifies allowed principals for certificate authentication as a
+comma-separated list.
+At least one name from the list must appear in the certificate's
+list of principals for the certificate to be accepted.
+This option is ignored for keys that are not marked as trusted certificate
+signers using the
+.Cm cert-authority
+option.
+.It Cm pty
+Permits tty allocation previously disabled by the
+.Cm restrict
+option.
+.It Cm no-touch-required
+Do not require demonstration of user presence
+for signatures made using this key.
+This option only makes sense for the FIDO authenticator algorithms
+.Cm ecdsa-sk
+and
+.Cm ed25519-sk .
+.It Cm verify-required
+Require that signatures made using this key attest that they verified
+the user, e.g. via a PIN.
+This option only makes sense for the FIDO authenticator algorithms
+.Cm ecdsa-sk
+and
+.Cm ed25519-sk .
+.It Cm restrict
+Enable all restrictions, i.e. disable port, agent and X11 forwarding,
+as well as disabling PTY allocation
+and execution of
+.Pa ~/.ssh/rc .
+If any future restriction capabilities are added to authorized_keys files,
+they will be included in this set.
+.It Cm tunnel="n"
+Force a
+.Xr tun 4
+device on the server.
+Without this option, the next available device will be used if
+the client requests a tunnel.
+.It Cm user-rc
+Enables execution of
+.Pa ~/.ssh/rc
+previously disabled by the
+.Cm restrict
+option.
+.It Cm X11-forwarding
+Permits X11 forwarding previously disabled by the
+.Cm restrict
+option.
+.El
+.Pp
+An example authorized_keys file:
+.Bd -literal -offset 3n
+# Comments are allowed at start of line. Blank lines are allowed.
+# Plain key, no restrictions
+ssh-rsa ...
+# Forced command, disable PTY and all forwarding
+restrict,command="dump /home" ssh-rsa ...
+# Restriction of ssh -L forwarding destinations
+permitopen="192.0.2.1:80",permitopen="192.0.2.2:25" ssh-rsa ...
+# Restriction of ssh -R forwarding listeners
+permitlisten="localhost:8080",permitlisten="[::1]:22000" ssh-rsa ...
+# Configuration for tunnel forwarding
+tunnel="0",command="sh /etc/netstart tun0" ssh-rsa ...
+# Override of restriction to allow PTY allocation
+restrict,pty,command="nethack" ssh-rsa ...
+# Allow FIDO key without requiring touch
+no-touch-required sk-ecdsa-sha2-nistp256@openssh.com ...
+# Require user-verification (e.g. PIN or biometric) for FIDO key
+verify-required sk-ecdsa-sha2-nistp256@openssh.com ...
+# Trust CA key, allow touch-less FIDO if requested in certificate
+cert-authority,no-touch-required,principals="user_a" ssh-rsa ...
+.Ed
+.Sh SSH_KNOWN_HOSTS FILE FORMAT
+The
+.Pa /etc/ssh/ssh_known_hosts
+and
+.Pa ~/.ssh/known_hosts
+files contain host public keys for all known hosts.
+The global file should
+be prepared by the administrator (optional), and the per-user file is
+maintained automatically: whenever the user connects to an unknown host,
+its key is added to the per-user file.
+.Pp
+Each line in these files contains the following fields: marker (optional),
+hostnames, keytype, base64-encoded key, comment.
+The fields are separated by spaces.
+.Pp
+The marker is optional, but if it is present then it must be one of
+.Dq @cert-authority ,
+to indicate that the line contains a certification authority (CA) key,
+or
+.Dq @revoked ,
+to indicate that the key contained on the line is revoked and must not ever
+be accepted.
+Only one marker should be used on a key line.
+.Pp
+Hostnames is a comma-separated list of patterns
+.Pf ( Ql *
+and
+.Ql \&?
+act as
+wildcards); each pattern in turn is matched against the host name.
+When
+.Nm sshd
+is authenticating a client, such as when using
+.Cm HostbasedAuthentication ,
+this will be the canonical client host name.
+When
+.Xr ssh 1
+is authenticating a server, this will be the host name
+given by the user, the value of the
+.Xr ssh 1
+.Cm HostkeyAlias
+if it was specified, or the canonical server hostname if the
+.Xr ssh 1
+.Cm CanonicalizeHostname
+option was used.
+.Pp
+A pattern may also be preceded by
+.Ql \&!
+to indicate negation: if the host name matches a negated
+pattern, it is not accepted (by that line) even if it matched another
+pattern on the line.
+A hostname or address may optionally be enclosed within
+.Ql \&[
+and
+.Ql \&]
+brackets then followed by
+.Ql \&:
+and a non-standard port number.
+.Pp
+Alternately, hostnames may be stored in a hashed form which hides host names
+and addresses should the file's contents be disclosed.
+Hashed hostnames start with a
+.Ql |
+character.
+Only one hashed hostname may appear on a single line and none of the above
+negation or wildcard operators may be applied.
+.Pp
+The keytype and base64-encoded key are taken directly from the host key; they
+can be obtained, for example, from
+.Pa /etc/ssh/ssh_host_rsa_key.pub .
+The optional comment field continues to the end of the line, and is not used.
+.Pp
+Lines starting with
+.Ql #
+and empty lines are ignored as comments.
+.Pp
+When performing host authentication, authentication is accepted if any
+matching line has the proper key; either one that matches exactly or,
+if the server has presented a certificate for authentication, the key
+of the certification authority that signed the certificate.
+For a key to be trusted as a certification authority, it must use the
+.Dq @cert-authority
+marker described above.
+.Pp
+The known hosts file also provides a facility to mark keys as revoked,
+for example when it is known that the associated private key has been
+stolen.
+Revoked keys are specified by including the
+.Dq @revoked
+marker at the beginning of the key line, and are never accepted for
+authentication or as certification authorities, but instead will
+produce a warning from
+.Xr ssh 1
+when they are encountered.
+.Pp
+It is permissible (but not
+recommended) to have several lines or different host keys for the same
+names.
+This will inevitably happen when short forms of host names
+from different domains are put in the file.
+It is possible
+that the files contain conflicting information; authentication is
+accepted if valid information can be found from either file.
+.Pp
+Note that the lines in these files are typically hundreds of characters
+long, and you definitely don't want to type in the host keys by hand.
+Rather, generate them by a script,
+.Xr ssh-keyscan 1
+or by taking, for example,
+.Pa /etc/ssh/ssh_host_rsa_key.pub
+and adding the host names at the front.
+.Xr ssh-keygen 1
+also offers some basic automated editing for
+.Pa ~/.ssh/known_hosts
+including removing hosts matching a host name and converting all host
+names to their hashed representations.
+.Pp
+An example ssh_known_hosts file:
+.Bd -literal -offset 3n
+# Comments allowed at start of line
+cvs.example.net,192.0.2.10 ssh-rsa AAAA1234.....=
+# A hashed hostname
+|1|JfKTdBh7rNbXkVAQCRp4OQoPfmI=|USECr3SWf1JUPsms5AqfD5QfxkM= ssh-rsa
+AAAA1234.....=
+# A revoked key
+@revoked * ssh-rsa AAAAB5W...
+# A CA key, accepted for any host in *.mydomain.com or *.mydomain.org
+@cert-authority *.mydomain.org,*.mydomain.com ssh-rsa AAAAB5W...
+.Ed
+.Sh FILES
+.Bl -tag -width Ds -compact
+.It Pa ~/.hushlogin
+This file is used to suppress printing the last login time and
+.Pa /etc/motd ,
+if
+.Cm PrintLastLog
+and
+.Cm PrintMotd ,
+respectively,
+are enabled.
+It does not suppress printing of the banner specified by
+.Cm Banner .
+.Pp
+.It Pa ~/.rhosts
+This file is used for host-based authentication (see
+.Xr ssh 1
+for more information).
+On some machines this file may need to be
+world-readable if the user's home directory is on an NFS partition,
+because
+.Nm
+reads it as root.
+Additionally, this file must be owned by the user,
+and must not have write permissions for anyone else.
+The recommended
+permission for most machines is read/write for the user, and not
+accessible by others.
+.Pp
+.It Pa ~/.shosts
+This file is used in exactly the same way as
+.Pa .rhosts ,
+but allows host-based authentication without permitting login with
+rlogin/rsh.
+.Pp
+.It Pa ~/.ssh/
+This directory is the default location for all user-specific configuration
+and authentication information.
+There is no general requirement to keep the entire contents of this directory
+secret, but the recommended permissions are read/write/execute for the user,
+and not accessible by others.
+.Pp
+.It Pa ~/.ssh/authorized_keys
+Lists the public keys (DSA, ECDSA, Ed25519, RSA)
+that can be used for logging in as this user.
+The format of this file is described above.
+The content of the file is not highly sensitive, but the recommended
+permissions are read/write for the user, and not accessible by others.
+.Pp
+If this file, the
+.Pa ~/.ssh
+directory, or the user's home directory are writable
+by other users, then the file could be modified or replaced by unauthorized
+users.
+In this case,
+.Nm
+will not allow it to be used unless the
+.Cm StrictModes
+option has been set to
+.Dq no .
+.Pp
+.It Pa ~/.ssh/environment
+This file is read into the environment at login (if it exists).
+It can only contain empty lines, comment lines (that start with
+.Ql # ) ,
+and assignment lines of the form name=value.
+The file should be writable
+only by the user; it need not be readable by anyone else.
+Environment processing is disabled by default and is
+controlled via the
+.Cm PermitUserEnvironment
+option.
+.Pp
+.It Pa ~/.ssh/known_hosts
+Contains a list of host keys for all hosts the user has logged into
+that are not already in the systemwide list of known host keys.
+The format of this file is described above.
+This file should be writable only by root/the owner and
+can, but need not be, world-readable.
+.Pp
+.It Pa ~/.ssh/rc
+Contains initialization routines to be run before
+the user's home directory becomes accessible.
+This file should be writable only by the user, and need not be
+readable by anyone else.
+.Pp
+.It Pa /etc/hosts.equiv
+This file is for host-based authentication (see
+.Xr ssh 1 ) .
+It should only be writable by root.
+.Pp
+.It Pa /etc/moduli
+Contains Diffie-Hellman groups used for the "Diffie-Hellman Group Exchange"
+key exchange method.
+The file format is described in
+.Xr moduli 5 .
+If no usable groups are found in this file then fixed internal groups will
+be used.
+.Pp
+.It Pa /etc/motd
+See
+.Xr motd 5 .
+.Pp
+.It Pa /etc/nologin
+If this file exists,
+.Nm
+refuses to let anyone except root log in.
+The contents of the file
+are displayed to anyone trying to log in, and non-root connections are
+refused.
+The file should be world-readable.
+.Pp
+.It Pa /etc/shosts.equiv
+This file is used in exactly the same way as
+.Pa hosts.equiv ,
+but allows host-based authentication without permitting login with
+rlogin/rsh.
+.Pp
+.It Pa /etc/ssh/ssh_host_ecdsa_key
+.It Pa /etc/ssh/ssh_host_ed25519_key
+.It Pa /etc/ssh/ssh_host_rsa_key
+These files contain the private parts of the host keys.
+These files should only be owned by root, readable only by root, and not
+accessible to others.
+Note that
+.Nm
+does not start if these files are group/world-accessible.
+.Pp
+.It Pa /etc/ssh/ssh_host_ecdsa_key.pub
+.It Pa /etc/ssh/ssh_host_ed25519_key.pub
+.It Pa /etc/ssh/ssh_host_rsa_key.pub
+These files contain the public parts of the host keys.
+These files should be world-readable but writable only by
+root.
+Their contents should match the respective private parts.
+These files are not
+really used for anything; they are provided for the convenience of
+the user so their contents can be copied to known hosts files.
+These files are created using
+.Xr ssh-keygen 1 .
+.Pp
+.It Pa /etc/ssh/ssh_known_hosts
+Systemwide list of known host keys.
+This file should be prepared by the
+system administrator to contain the public host keys of all machines in the
+organization.
+The format of this file is described above.
+This file should be writable only by root/the owner and
+should be world-readable.
+.Pp
+.It Pa /etc/ssh/sshd_config
+Contains configuration data for
+.Nm sshd .
+The file format and configuration options are described in
+.Xr sshd_config 5 .
+.Pp
+.It Pa /etc/ssh/sshrc
+Similar to
+.Pa ~/.ssh/rc ,
+it can be used to specify
+machine-specific login-time initializations globally.
+This file should be writable only by root, and should be world-readable.
+.Pp
+.It Pa /var/empty
+.Xr chroot 2
+directory used by
+.Nm
+during privilege separation in the pre-authentication phase.
+The directory should not contain any files and must be owned by root
+and not group or world-writable.
+.Pp
+.It Pa /var/run/sshd.pid
+Contains the process ID of the
+.Nm
+listening for connections (if there are several daemons running
+concurrently for different ports, this contains the process ID of the one
+started last).
+The content of this file is not sensitive; it can be world-readable.
+.El
+.Sh SEE ALSO
+.Xr scp 1 ,
+.Xr sftp 1 ,
+.Xr ssh 1 ,
+.Xr ssh-add 1 ,
+.Xr ssh-agent 1 ,
+.Xr ssh-keygen 1 ,
+.Xr ssh-keyscan 1 ,
+.Xr chroot 2 ,
+.Xr login.conf 5 ,
+.Xr moduli 5 ,
+.Xr sshd_config 5 ,
+.Xr inetd 8 ,
+.Xr sftp-server 8
+.Sh AUTHORS
+OpenSSH is a derivative of the original and free
+ssh 1.2.12 release by Tatu Ylonen.
+Aaron Campbell, Bob Beck, Markus Friedl, Niels Provos,
+Theo de Raadt and Dug Song
+removed many bugs, re-added newer features and
+created OpenSSH.
+Markus Friedl contributed the support for SSH
+protocol versions 1.5 and 2.0.
+Niels Provos and Markus Friedl contributed support
+for privilege separation.