diff options
Diffstat (limited to '')
| -rw-r--r-- | doc/plzip.1 | 146 | ||||
| -rw-r--r-- | doc/plzip.info | 823 | ||||
| -rw-r--r-- | doc/plzip.texi | 897 |
3 files changed, 1866 insertions, 0 deletions
diff --git a/doc/plzip.1 b/doc/plzip.1 new file mode 100644 index 0000000..4be148d --- /dev/null +++ b/doc/plzip.1 @@ -0,0 +1,146 @@ +.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.47.16. +.TH PLZIP "1" "January 2022" "plzip 1.10" "User Commands" +.SH NAME +plzip \- reduces the size of files +.SH SYNOPSIS +.B plzip +[\fI\,options\/\fR] [\fI\,files\/\fR] +.SH DESCRIPTION +Plzip is a massively parallel (multi\-threaded) implementation of lzip, fully +compatible with lzip 1.4 or newer. Plzip uses the compression library lzlib. +.PP +Lzip is a lossless data compressor with a user interface similar to the one +of gzip or bzip2. Lzip uses a simplified form of the 'Lempel\-Ziv\-Markov +chain\-Algorithm' (LZMA) stream format and provides a 3 factor integrity +checking to maximize interoperability and optimize safety. Lzip can compress +about as fast as gzip (lzip \fB\-0\fR) or compress most files more than bzip2 +(lzip \fB\-9\fR). Decompression speed is intermediate between gzip and bzip2. +Lzip is better than gzip and bzip2 from a data recovery perspective. Lzip +has been designed, written, and tested with great care to replace gzip and +bzip2 as the standard general\-purpose compressed format for unix\-like +systems. +.PP +Plzip can compress/decompress large files on multiprocessor machines much +faster than lzip, at the cost of a slightly reduced compression ratio (0.4 +to 2 percent larger compressed files). Note that the number of usable +threads is limited by file size; on files larger than a few GB plzip can use +hundreds of processors, but on files of only a few MB plzip is no faster +than lzip. +.SH OPTIONS +.TP +\fB\-h\fR, \fB\-\-help\fR +display this help and exit +.TP +\fB\-V\fR, \fB\-\-version\fR +output version information and exit +.TP +\fB\-a\fR, \fB\-\-trailing\-error\fR +exit with error status if trailing data +.TP +\fB\-B\fR, \fB\-\-data\-size=\fR<bytes> +set size of input data blocks [2x8=16 MiB] +.TP +\fB\-c\fR, \fB\-\-stdout\fR +write to standard output, keep input files +.TP +\fB\-d\fR, \fB\-\-decompress\fR +decompress +.TP +\fB\-f\fR, \fB\-\-force\fR +overwrite existing output files +.TP +\fB\-F\fR, \fB\-\-recompress\fR +force re\-compression of compressed files +.TP +\fB\-k\fR, \fB\-\-keep\fR +keep (don't delete) input files +.TP +\fB\-l\fR, \fB\-\-list\fR +print (un)compressed file sizes +.TP +\fB\-m\fR, \fB\-\-match\-length=\fR<bytes> +set match length limit in bytes [36] +.TP +\fB\-n\fR, \fB\-\-threads=\fR<n> +set number of (de)compression threads [2] +.TP +\fB\-o\fR, \fB\-\-output=\fR<file> +write to <file>, keep input files +.TP +\fB\-q\fR, \fB\-\-quiet\fR +suppress all messages +.TP +\fB\-s\fR, \fB\-\-dictionary\-size=\fR<bytes> +set dictionary size limit in bytes [8 MiB] +.TP +\fB\-t\fR, \fB\-\-test\fR +test compressed file integrity +.TP +\fB\-v\fR, \fB\-\-verbose\fR +be verbose (a 2nd \fB\-v\fR gives more) +.TP +\fB\-0\fR .. \fB\-9\fR +set compression level [default 6] +.TP +\fB\-\-fast\fR +alias for \fB\-0\fR +.TP +\fB\-\-best\fR +alias for \fB\-9\fR +.TP +\fB\-\-loose\-trailing\fR +allow trailing data seeming corrupt header +.TP +\fB\-\-in\-slots=\fR<n> +number of 1 MiB input packets buffered [4] +.TP +\fB\-\-out\-slots=\fR<n> +number of 1 MiB output packets buffered [64] +.TP +\fB\-\-check\-lib\fR +compare version of lzlib.h with liblz.{a,so} +.PP +If no file names are given, or if a file is '\-', plzip compresses or +decompresses from standard input to standard output. +Numbers may be followed by a multiplier: k = kB = 10^3 = 1000, +Ki = KiB = 2^10 = 1024, M = 10^6, Mi = 2^20, G = 10^9, Gi = 2^30, etc... +Dictionary sizes 12 to 29 are interpreted as powers of two, meaning 2^12 +to 2^29 bytes. +.PP +The bidimensional parameter space of LZMA can't be mapped to a linear +scale optimal for all files. If your files are large, very repetitive, +etc, you may need to use the options \fB\-\-dictionary\-size\fR and \fB\-\-match\-length\fR +directly to achieve optimal performance. +.PP +To extract all the files from archive 'foo.tar.lz', use the commands +\&'tar \fB\-xf\fR foo.tar.lz' or 'plzip \fB\-cd\fR foo.tar.lz | tar \fB\-xf\fR \-'. +.PP +Exit status: 0 for a normal exit, 1 for environmental problems (file +not found, invalid flags, I/O errors, etc), 2 to indicate a corrupt or +invalid input file, 3 for an internal consistency error (e.g., bug) which +caused plzip to panic. +.SH "REPORTING BUGS" +Report bugs to lzip\-bug@nongnu.org +.br +Plzip home page: http://www.nongnu.org/lzip/plzip.html +.SH COPYRIGHT +Copyright \(co 2009 Laszlo Ersek. +.br +Copyright \(co 2022 Antonio Diaz Diaz. +Using lzlib 1.13 +License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl.html> +.br +This is free software: you are free to change and redistribute it. +There is NO WARRANTY, to the extent permitted by law. +.SH "SEE ALSO" +The full documentation for +.B plzip +is maintained as a Texinfo manual. If the +.B info +and +.B plzip +programs are properly installed at your site, the command +.IP +.B info plzip +.PP +should give you access to the complete manual. diff --git a/doc/plzip.info b/doc/plzip.info new file mode 100644 index 0000000..c38ea5c --- /dev/null +++ b/doc/plzip.info @@ -0,0 +1,823 @@ +This is plzip.info, produced by makeinfo version 4.13+ from plzip.texi. + +INFO-DIR-SECTION Compression +START-INFO-DIR-ENTRY +* Plzip: (plzip). Massively parallel implementation of lzip +END-INFO-DIR-ENTRY + + +File: plzip.info, Node: Top, Next: Introduction, Up: (dir) + +Plzip Manual +************ + +This manual is for Plzip (version 1.10, 24 January 2022). + +* Menu: + +* Introduction:: Purpose and features of plzip +* Output:: Meaning of plzip's output +* Invoking plzip:: Command line interface +* Program design:: Internal structure of plzip +* Memory requirements:: Memory required to compress and decompress +* Minimum file sizes:: Minimum file sizes required for full speed +* File format:: Detailed format of the compressed file +* Trailing data:: Extra data appended to the file +* Examples:: A small tutorial with examples +* Problems:: Reporting bugs +* Concept index:: Index of concepts + + + Copyright (C) 2009-2022 Antonio Diaz Diaz. + + This manual is free documentation: you have unlimited permission to copy, +distribute, and modify it. + + +File: plzip.info, Node: Introduction, Next: Output, Prev: Top, Up: Top + +1 Introduction +************** + +Plzip is a massively parallel (multi-threaded) implementation of lzip, fully +compatible with lzip 1.4 or newer. Plzip uses the compression library lzlib. + + Lzip is a lossless data compressor with a user interface similar to the +one of gzip or bzip2. Lzip uses a simplified form of the 'Lempel-Ziv-Markov +chain-Algorithm' (LZMA) stream format and provides a 3 factor integrity +checking to maximize interoperability and optimize safety. Lzip can compress +about as fast as gzip (lzip -0) or compress most files more than bzip2 +(lzip -9). Decompression speed is intermediate between gzip and bzip2. Lzip +is better than gzip and bzip2 from a data recovery perspective. Lzip has +been designed, written, and tested with great care to replace gzip and +bzip2 as the standard general-purpose compressed format for unix-like +systems. + + Plzip can compress/decompress large files on multiprocessor machines much +faster than lzip, at the cost of a slightly reduced compression ratio (0.4 +to 2 percent larger compressed files). Note that the number of usable +threads is limited by file size; on files larger than a few GB plzip can use +hundreds of processors, but on files of only a few MB plzip is no faster +than lzip. *Note Minimum file sizes::. + + For creation and manipulation of compressed tar archives tarlz can be +more efficient than using tar and plzip because tarlz is able to keep the +alignment between tar members and lzip members. *Note tarlz manual: +(tarlz)Top. + + The lzip file format is designed for data sharing and long-term +archiving, taking into account both data integrity and decoder availability: + + * The lzip format provides very safe integrity checking and some data + recovery means. The program lziprecover can repair bit flip errors + (one of the most common forms of data corruption) in lzip files, and + provides data recovery capabilities, including error-checked merging + of damaged copies of a file. *Note Data safety: (lziprecover)Data + safety. + + * The lzip format is as simple as possible (but not simpler). The lzip + manual provides the source code of a simple decompressor along with a + detailed explanation of how it works, so that with the only help of the + lzip manual it would be possible for a digital archaeologist to extract + the data from a lzip file long after quantum computers eventually + render LZMA obsolete. + + * Additionally the lzip reference implementation is copylefted, which + guarantees that it will remain free forever. + + A nice feature of the lzip format is that a corrupt byte is easier to +repair the nearer it is from the beginning of the file. Therefore, with the +help of lziprecover, losing an entire archive just because of a corrupt +byte near the beginning is a thing of the past. + + Plzip uses the same well-defined exit status values used by lzip, which +makes it safer than compressors returning ambiguous warning values (like +gzip) when it is used as a back end for other programs like tar or zutils. + + Plzip will automatically use for each file the largest dictionary size +that does not exceed neither the file size nor the limit given. Keep in +mind that the decompression memory requirement is affected at compression +time by the choice of dictionary size limit. *Note Memory requirements::. + + When compressing, plzip replaces every file given in the command line +with a compressed version of itself, with the name "original_name.lz". When +decompressing, plzip attempts to guess the name for the decompressed file +from that of the compressed file as follows: + +filename.lz becomes filename +filename.tlz becomes filename.tar +anyothername becomes anyothername.out + + (De)compressing a file is much like copying or moving it. Therefore plzip +preserves the access and modification dates, permissions, and, when +possible, ownership of the file just as 'cp -p' does. (If the user ID or +the group ID can't be duplicated, the file permission bits S_ISUID and +S_ISGID are cleared). + + Plzip is able to read from some types of non-regular files if either the +option '-c' or the option '-o' is specified. + + Plzip will refuse to read compressed data from a terminal or write +compressed data to a terminal, as this would be entirely incomprehensible +and might leave the terminal in an abnormal state. + + Plzip will correctly decompress a file which is the concatenation of two +or more compressed files. The result is the concatenation of the +corresponding decompressed files. Integrity testing of concatenated +compressed files is also supported. + + +File: plzip.info, Node: Output, Next: Invoking plzip, Prev: Introduction, Up: Top + +2 Meaning of plzip's output +*************************** + +The output of plzip looks like this: + + plzip -v foo + foo: 6.676:1, 14.98% ratio, 85.02% saved, 450560 in, 67493 out. + + plzip -tvvv foo.lz + foo.lz: 6.676:1, 14.98% ratio, 85.02% saved. 450560 out, 67493 in. ok + + The meaning of each field is as follows: + +'N:1' + The compression ratio (uncompressed_size / compressed_size), shown as + N to 1. + +'ratio' + The inverse compression ratio (compressed_size / uncompressed_size), + shown as a percentage. A decimal ratio is easily obtained by moving the + decimal point two places to the left; 14.98% = 0.1498. + +'saved' + The space saved by compression (1 - ratio), shown as a percentage. + +'in' + Size of the input data. This is the uncompressed size when + compressing, or the compressed size when decompressing or testing. + Note that plzip always prints the uncompressed size before the + compressed size when compressing, decompressing, testing, or listing. + +'out' + Size of the output data. This is the compressed size when compressing, + or the decompressed size when decompressing or testing. + + + When decompressing or testing at verbosity level 4 (-vvvv), the +dictionary size used to compress the file is also shown. + + LANGUAGE NOTE: Uncompressed = not compressed = plain data; it may never +have been compressed. Decompressed is used to refer to data which have +undergone the process of decompression. + + +File: plzip.info, Node: Invoking plzip, Next: Program design, Prev: Output, Up: Top + +3 Invoking plzip +**************** + +The format for running plzip is: + + plzip [OPTIONS] [FILES] + +If no file names are specified, plzip compresses (or decompresses) from +standard input to standard output. A hyphen '-' used as a FILE argument +means standard input. It can be mixed with other FILES and is read just +once, the first time it appears in the command line. + + plzip supports the following options: *Note Argument syntax: +(arg_parser)Argument syntax. + +'-h' +'--help' + Print an informative help message describing the options and exit. + +'-V' +'--version' + Print the version number of plzip on the standard output and exit. + This version number should be included in all bug reports. + +'-a' +'--trailing-error' + Exit with error status 2 if any remaining input is detected after + decompressing the last member. Such remaining input is usually trailing + garbage that can be safely ignored. *Note concat-example::. + +'-B BYTES' +'--data-size=BYTES' + When compressing, set the size in bytes of the input data blocks. The + input file will be divided in chunks of this size before compression is + performed. Valid values range from 8 KiB to 1 GiB. Default value is + two times the dictionary size, except for option '-0' where it + defaults to 1 MiB. Plzip will reduce the dictionary size if it is + larger than the data size specified. *Note Minimum file sizes::. + +'-c' +'--stdout' + Compress or decompress to standard output; keep input files unchanged. + If compressing several files, each file is compressed independently. + This option (or '-o') is needed when reading from a named pipe (fifo) + or from a device. Use 'lziprecover -cd -i' to recover as much of the + decompressed data as possible when decompressing a corrupt file. '-c' + overrides '-o'. '-c' has no effect when testing or listing. + +'-d' +'--decompress' + Decompress the files specified. If a file does not exist, can't be + opened, or the destination file already exists and '--force' has not + been specified, plzip continues decompressing the rest of the files + and exits with error status 1. If a file fails to decompress, or is a + terminal, plzip exits immediately with error status 2 without + decompressing the rest of the files. A terminal is considered an + uncompressed file, and therefore invalid. + +'-f' +'--force' + Force overwrite of output files. + +'-F' +'--recompress' + When compressing, force re-compression of files whose name already has + the '.lz' or '.tlz' suffix. + +'-k' +'--keep' + Keep (don't delete) input files during compression or decompression. + +'-l' +'--list' + Print the uncompressed size, compressed size, and percentage saved of + the files specified. Trailing data are ignored. The values produced + are correct even for multimember files. If more than one file is + given, a final line containing the cumulative sizes is printed. With + '-v', the dictionary size, the number of members in the file, and the + amount of trailing data (if any) are also printed. With '-vv', the + positions and sizes of each member in multimember files are also + printed. + + If any file is damaged, does not exist, can't be opened, or is not + regular, the final exit status will be > 0. '-lq' can be used to verify + quickly (without decompressing) the structural integrity of the files + specified. (Use '--test' to verify the data integrity). '-alq' + additionally verifies that none of the files specified contain + trailing data. + +'-m BYTES' +'--match-length=BYTES' + When compressing, set the match length limit in bytes. After a match + this long is found, the search is finished. Valid values range from 5 + to 273. Larger values usually give better compression ratios but longer + compression times. + +'-n N' +'--threads=N' + Set the maximum number of worker threads, overriding the system's + default. Valid values range from 1 to "as many as your system can + support". If this option is not used, plzip tries to detect the number + of processors in the system and use it as default value. When + compressing on a 32 bit system, plzip tries to limit the memory use to + under 2.22 GiB (4 worker threads at level -9) by reducing the number + of threads below the system's default. 'plzip --help' shows the + system's default value. + + Plzip starts the number of threads required by each file without + exceeding the value specified. Note that the number of usable threads + is limited to ceil( file_size / data_size ) during compression (*note + Minimum file sizes::), and to the number of members in the input + during decompression. You can find the number of members in a lzip + file by running 'plzip -lv file.lz'. + +'-o FILE' +'--output=FILE' + If '-c' has not been also specified, write the (de)compressed output to + FILE; keep input files unchanged. If compressing several files, each + file is compressed independently. This option (or '-c') is needed when + reading from a named pipe (fifo) or from a device. '-o -' is + equivalent to '-c'. '-o' has no effect when testing or listing. + + In order to keep backward compatibility with plzip versions prior to + 1.9, when compressing from standard input and no other file names are + given, the extension '.lz' is appended to FILE unless it already ends + in '.lz' or '.tlz'. This feature will be removed in a future version + of plzip. Meanwhile, redirection may be used instead of '-o' to write + the compressed output to a file without the extension '.lz' in its + name: 'plzip < file > foo'. + +'-q' +'--quiet' + Quiet operation. Suppress all messages. + +'-s BYTES' +'--dictionary-size=BYTES' + When compressing, set the dictionary size limit in bytes. Plzip will + use for each file the largest dictionary size that does not exceed + neither the file size nor this limit. Valid values range from 4 KiB to + 512 MiB. Values 12 to 29 are interpreted as powers of two, meaning + 2^12 to 2^29 bytes. Dictionary sizes are quantized so that they can be + coded in just one byte (*note coded-dict-size::). If the size specified + does not match one of the valid sizes, it will be rounded upwards by + adding up to (BYTES / 8) to it. + + For maximum compression you should use a dictionary size limit as large + as possible, but keep in mind that the decompression memory requirement + is affected at compression time by the choice of dictionary size limit. + +'-t' +'--test' + Check integrity of the files specified, but don't decompress them. This + really performs a trial decompression and throws away the result. Use + it together with '-v' to see information about the files. If a file + fails the test, does not exist, can't be opened, or is a terminal, + plzip continues checking the rest of the files. A final diagnostic is + shown at verbosity level 1 or higher if any file fails the test when + testing multiple files. + +'-v' +'--verbose' + Verbose mode. + When compressing, show the compression ratio and size for each file + processed. + When decompressing or testing, further -v's (up to 4) increase the + verbosity level, showing status, compression ratio, dictionary size, + decompressed size, and compressed size. + Two or more '-v' options show the progress of (de)compression, except + for single-member files. + +'-0 .. -9' + Compression level. Set the compression parameters (dictionary size and + match length limit) as shown in the table below. The default + compression level is '-6', equivalent to '-s8MiB -m36'. Note that '-9' + can be much slower than '-0'. These options have no effect when + decompressing, testing, or listing. + + The bidimensional parameter space of LZMA can't be mapped to a linear + scale optimal for all files. If your files are large, very repetitive, + etc, you may need to use the options '--dictionary-size' and + '--match-length' directly to achieve optimal performance. + + If several compression levels or '-s' or '-m' options are given, the + last setting is used. For example '-9 -s64MiB' is equivalent to + '-s64MiB -m273' + + Level Dictionary size (-s) Match length limit (-m) + -0 64 KiB 16 bytes + -1 1 MiB 5 bytes + -2 1.5 MiB 6 bytes + -3 2 MiB 8 bytes + -4 3 MiB 12 bytes + -5 4 MiB 20 bytes + -6 8 MiB 36 bytes + -7 16 MiB 68 bytes + -8 24 MiB 132 bytes + -9 32 MiB 273 bytes + +'--fast' +'--best' + Aliases for GNU gzip compatibility. + +'--loose-trailing' + When decompressing, testing, or listing, allow trailing data whose + first bytes are so similar to the magic bytes of a lzip header that + they can be confused with a corrupt header. Use this option if a file + triggers a "corrupt header" error and the cause is not indeed a + corrupt header. + +'--in-slots=N' + Number of 1 MiB input packets buffered per worker thread when + decompressing from non-seekable input. Increasing the number of packets + may increase decompression speed, but requires more memory. Valid + values range from 1 to 64. The default value is 4. + +'--out-slots=N' + Number of 1 MiB output packets buffered per worker thread when + decompressing to non-seekable output. Increasing the number of packets + may increase decompression speed, but requires more memory. Valid + values range from 1 to 1024. The default value is 64. + +'--check-lib' + Compare the version of lzlib used to compile plzip with the version + actually being used at run time and exit. Report any differences + found. Exit with error status 1 if differences are found. A mismatch + may indicate that lzlib is not correctly installed or that a different + version of lzlib has been installed after compiling plzip. Exit with + error status 2 if LZ_API_VERSION and LZ_version_string don't match. + 'plzip -v --check-lib' shows the version of lzlib being used and the + value of LZ_API_VERSION (if defined). *Note Library version: + (lzlib)Library version. + + + Numbers given as arguments to options may be followed by a multiplier +and an optional 'B' for "byte". + + Table of SI and binary prefixes (unit multipliers): + +Prefix Value | Prefix Value +k kilobyte (10^3 = 1000) | Ki kibibyte (2^10 = 1024) +M megabyte (10^6) | Mi mebibyte (2^20) +G gigabyte (10^9) | Gi gibibyte (2^30) +T terabyte (10^12) | Ti tebibyte (2^40) +P petabyte (10^15) | Pi pebibyte (2^50) +E exabyte (10^18) | Ei exbibyte (2^60) +Z zettabyte (10^21) | Zi zebibyte (2^70) +Y yottabyte (10^24) | Yi yobibyte (2^80) + + + Exit status: 0 for a normal exit, 1 for environmental problems (file not +found, invalid flags, I/O errors, etc), 2 to indicate a corrupt or invalid +input file, 3 for an internal consistency error (e.g., bug) which caused +plzip to panic. + + +File: plzip.info, Node: Program design, Next: Memory requirements, Prev: Invoking plzip, Up: Top + +4 Internal structure of plzip +***************************** + +When compressing, plzip divides the input file into chunks and compresses as +many chunks simultaneously as worker threads are chosen, creating a +multimember compressed file. Each chunk is compressed in-place (using the +same buffer for input and output), reducing the amount of RAM required. + + When decompressing, plzip decompresses as many members simultaneously as +worker threads are chosen. Files that were compressed with lzip will not be +decompressed faster than using lzip (unless the option '-b' was used) +because lzip usually produces single-member files, which can't be +decompressed in parallel. + + For each input file, a splitter thread and several worker threads are +created, acting the main thread as muxer (multiplexer) thread. A "packet +courier" takes care of data transfers among threads and limits the maximum +number of data blocks (packets) being processed simultaneously. + + The splitter reads data blocks from the input file, and distributes them +to the workers. The workers (de)compress the blocks received from the +splitter. The muxer collects processed packets from the workers, and writes +them to the output file. + + .------------. + ,-->| worker 0 |--, + | `------------' | +.-------. .----------. | .------------. | .-------. .--------. +| input |-->| splitter |-+-->| worker 1 |--+-->| muxer |-->| output | +| file | `----------' | `------------' | `-------' | file | +`-------' | ... | `--------' + | .------------. | + `-->| worker N-1 |--' + `------------' + + When decompressing from a regular file, the splitter is removed and the +workers read directly from the input file. If the output file is also a +regular file, the muxer is also removed and the workers write directly to +the output file. With these optimizations, the use of RAM is greatly +reduced and the decompression speed of large files with many members is +only limited by the number of processors available and by I/O speed. + + +File: plzip.info, Node: Memory requirements, Next: Minimum file sizes, Prev: Program design, Up: Top + +5 Memory required to compress and decompress +******************************************** + +The amount of memory required *per worker thread* for decompression or +testing is approximately the following: + + * For decompression of a regular (seekable) file to another regular file, + or for testing of a regular file; the dictionary size. + + * For testing of a non-seekable file or of standard input; the dictionary + size plus 1 MiB plus up to the number of 1 MiB input packets buffered + (4 by default). + + * For decompression of a regular file to a non-seekable file or to + standard output; the dictionary size plus up to the number of 1 MiB + output packets buffered (64 by default). + + * For decompression of a non-seekable file or of standard input; the + dictionary size plus 1 MiB plus up to the number of 1 MiB input and + output packets buffered (68 by default). + +The amount of memory required *per worker thread* for compression is +approximately the following: + + * For compression at level -0; 1.5 MiB plus 3.375 times the data size + (*note --data-size::). Default is 4.875 MiB. + + * For compression at other levels; 11 times the dictionary size plus + 3.375 times the data size. Default is 142 MiB. + +The following table shows the memory required *per thread* for compression +at a given level, using the default data size for each level: + +Level Memory required +-0 4.875 MiB +-1 17.75 MiB +-2 26.625 MiB +-3 35.5 MiB +-4 53.25 MiB +-5 71 MiB +-6 142 MiB +-7 284 MiB +-8 426 MiB +-9 568 MiB + + +File: plzip.info, Node: Minimum file sizes, Next: File format, Prev: Memory requirements, Up: Top + +6 Minimum file sizes required for full compression speed +******************************************************** + +When compressing, plzip divides the input file into chunks and compresses +as many chunks simultaneously as worker threads are chosen, creating a +multimember compressed file. + + For this to work as expected (and roughly multiply the compression speed +by the number of available processors), the uncompressed file must be at +least as large as the number of worker threads times the chunk size (*note +--data-size::). Else some processors will not get any data to compress, and +compression will be proportionally slower. The maximum speed increase +achievable on a given file is limited by the ratio (file_size / data_size). +For example, a tarball the size of gcc or linux will scale up to 10 or 14 +processors at level -9. + + The following table shows the minimum uncompressed file size needed for +full use of N processors at a given compression level, using the default +data size for each level: + +Processors 2 4 8 16 64 256 +------------------------------------------------------------------ +Level +-0 2 MiB 4 MiB 8 MiB 16 MiB 64 MiB 256 MiB +-1 4 MiB 8 MiB 16 MiB 32 MiB 128 MiB 512 MiB +-2 6 MiB 12 MiB 24 MiB 48 MiB 192 MiB 768 MiB +-3 8 MiB 16 MiB 32 MiB 64 MiB 256 MiB 1 GiB +-4 12 MiB 24 MiB 48 MiB 96 MiB 384 MiB 1.5 GiB +-5 16 MiB 32 MiB 64 MiB 128 MiB 512 MiB 2 GiB +-6 32 MiB 64 MiB 128 MiB 256 MiB 1 GiB 4 GiB +-7 64 MiB 128 MiB 256 MiB 512 MiB 2 GiB 8 GiB +-8 96 MiB 192 MiB 384 MiB 768 MiB 3 GiB 12 GiB +-9 128 MiB 256 MiB 512 MiB 1 GiB 4 GiB 16 GiB + + +File: plzip.info, Node: File format, Next: Trailing data, Prev: Minimum file sizes, Up: Top + +7 File format +************* + +Perfection is reached, not when there is no longer anything to add, but +when there is no longer anything to take away. +-- Antoine de Saint-Exupery + + + In the diagram below, a box like this: + ++---+ +| | <-- the vertical bars might be missing ++---+ + + represents one byte; a box like this: + ++==============+ +| | ++==============+ + + represents a variable number of bytes. + + + A lzip file consists of a series of independent "members" (compressed +data sets). The members simply appear one after another in the file, with no +additional information before, between, or after them. Each member can +encode in compressed form up to 16 EiB - 1 byte of uncompressed data. The +size of a multimember file is unlimited. + + Each member has the following structure: + ++--+--+--+--+----+----+=============+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ +| ID string | VN | DS | LZMA stream | CRC32 | Data size | Member size | ++--+--+--+--+----+----+=============+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + + All multibyte values are stored in little endian order. + +'ID string (the "magic" bytes)' + A four byte string, identifying the lzip format, with the value "LZIP" + (0x4C, 0x5A, 0x49, 0x50). + +'VN (version number, 1 byte)' + Just in case something needs to be modified in the future. 1 for now. + +'DS (coded dictionary size, 1 byte)' + The dictionary size is calculated by taking a power of 2 (the base + size) and subtracting from it a fraction between 0/16 and 7/16 of the + base size. + Bits 4-0 contain the base 2 logarithm of the base size (12 to 29). + Bits 7-5 contain the numerator of the fraction (0 to 7) to subtract + from the base size to obtain the dictionary size. + Example: 0xD3 = 2^19 - 6 * 2^15 = 512 KiB - 6 * 32 KiB = 320 KiB + Valid values for dictionary size range from 4 KiB to 512 MiB. + +'LZMA stream' + The LZMA stream, finished by an "End Of Stream" marker. Uses default + values for encoder properties. *Note Stream format: (lzip)Stream + format, for a complete description. + +'CRC32 (4 bytes)' + Cyclic Redundancy Check (CRC) of the original uncompressed data. + +'Data size (8 bytes)' + Size of the original uncompressed data. + +'Member size (8 bytes)' + Total size of the member, including header and trailer. This field acts + as a distributed index, allows the verification of stream integrity, + and facilitates the safe recovery of undamaged members from + multimember files. Member size should be limited to 2 PiB to prevent + the data size field from overflowing. + + + +File: plzip.info, Node: Trailing data, Next: Examples, Prev: File format, Up: Top + +8 Extra data appended to the file +********************************* + +Sometimes extra data are found appended to a lzip file after the last +member. Such trailing data may be: + + * Padding added to make the file size a multiple of some block size, for + example when writing to a tape. It is safe to append any amount of + padding zero bytes to a lzip file. + + * Useful data added by the user; a cryptographically secure hash, a + description of file contents, etc. It is safe to append any amount of + text to a lzip file as long as none of the first four bytes of the text + match the corresponding byte in the string "LZIP", and the text does + not contain any zero bytes (null characters). Nonzero bytes and zero + bytes can't be safely mixed in trailing data. + + * Garbage added by some not totally successful copy operation. + + * Malicious data added to the file in order to make its total size and + hash value (for a chosen hash) coincide with those of another file. + + * In rare cases, trailing data could be the corrupt header of another + member. In multimember or concatenated files the probability of + corruption happening in the magic bytes is 5 times smaller than the + probability of getting a false positive caused by the corruption of the + integrity information itself. Therefore it can be considered to be + below the noise level. Additionally, the test used by plzip to + discriminate trailing data from a corrupt header has a Hamming + distance (HD) of 3, and the 3 bit flips must happen in different magic + bytes for the test to fail. In any case, the option '--trailing-error' + guarantees that any corrupt header will be detected. + + Trailing data are in no way part of the lzip file format, but tools +reading lzip files are expected to behave as correctly and usefully as +possible in the presence of trailing data. + + Trailing data can be safely ignored in most cases. In some cases, like +that of user-added data, they are expected to be ignored. In those cases +where a file containing trailing data must be rejected, the option +'--trailing-error' can be used. *Note --trailing-error::. + + +File: plzip.info, Node: Examples, Next: Problems, Prev: Trailing data, Up: Top + +9 A small tutorial with examples +******************************** + +WARNING! Even if plzip is bug-free, other causes may result in a corrupt +compressed file (bugs in the system libraries, memory errors, etc). +Therefore, if the data you are going to compress are important, give the +option '--keep' to plzip and don't remove the original file until you +verify the compressed file with a command like +'plzip -cd file.lz | cmp file -'. Most RAM errors happening during +compression can only be detected by comparing the compressed file with the +original because the corruption happens before plzip compresses the RAM +contents, resulting in a valid compressed file containing wrong data. + + +Example 1: Extract all the files from archive 'foo.tar.lz'. + + tar -xf foo.tar.lz + or + plzip -cd foo.tar.lz | tar -xf - + + +Example 2: Replace a regular file with its compressed version 'file.lz' and +show the compression ratio. + + plzip -v file + + +Example 3: Like example 2 but the created 'file.lz' has a block size of +1 MiB. The compression ratio is not shown. + + plzip -B 1MiB file + + +Example 4: Restore a regular file from its compressed version 'file.lz'. If +the operation is successful, 'file.lz' is removed. + + plzip -d file.lz + + +Example 5: Verify the integrity of the compressed file 'file.lz' and show +status. + + plzip -tv file.lz + + +Example 6: The right way of concatenating the decompressed output of two or +more compressed files. *Note Trailing data::. + + Don't do this + cat file1.lz file2.lz file3.lz | plzip -d - + Do this instead + plzip -cd file1.lz file2.lz file3.lz + + +Example 7: Decompress 'file.lz' partially until 10 KiB of decompressed data +are produced. + + plzip -cd file.lz | dd bs=1024 count=10 + + +Example 8: Decompress 'file.lz' partially from decompressed byte at offset +10000 to decompressed byte at offset 14999 (5000 bytes are produced). + + plzip -cd file.lz | dd bs=1000 skip=10 count=5 + + +Example 9: Compress a whole device in /dev/sdc and send the output to +'file.lz'. + + plzip -c /dev/sdc > file.lz + or + plzip /dev/sdc -o file.lz + + +File: plzip.info, Node: Problems, Next: Concept index, Prev: Examples, Up: Top + +10 Reporting bugs +***************** + +There are probably bugs in plzip. There are certainly errors and omissions +in this manual. If you report them, they will get fixed. If you don't, no +one will ever know about them and they will remain unfixed for all +eternity, if not longer. + + If you find a bug in plzip, please send electronic mail to +<lzip-bug@nongnu.org>. Include the version number, which you can find by +running 'plzip --version' and 'plzip -v --check-lib'. + + +File: plzip.info, Node: Concept index, Prev: Problems, Up: Top + +Concept index +************* + + +* Menu: + +* bugs: Problems. (line 6) +* examples: Examples. (line 6) +* file format: File format. (line 6) +* getting help: Problems. (line 6) +* introduction: Introduction. (line 6) +* invoking: Invoking plzip. (line 6) +* memory requirements: Memory requirements. (line 6) +* minimum file sizes: Minimum file sizes. (line 6) +* options: Invoking plzip. (line 6) +* output: Output. (line 6) +* program design: Program design. (line 6) +* trailing data: Trailing data. (line 6) +* usage: Invoking plzip. (line 6) +* version: Invoking plzip. (line 6) + + + +Tag Table: +Node: Top217 +Node: Introduction1156 +Node: Output5829 +Node: Invoking plzip7392 +Ref: --trailing-error8187 +Ref: --data-size8425 +Node: Program design18819 +Node: Memory requirements21122 +Node: Minimum file sizes22807 +Node: File format24821 +Ref: coded-dict-size26260 +Node: Trailing data27514 +Node: Examples29775 +Ref: concat-example31210 +Node: Problems31967 +Node: Concept index32522 + +End Tag Table + + +Local Variables: +coding: iso-8859-15 +End: diff --git a/doc/plzip.texi b/doc/plzip.texi new file mode 100644 index 0000000..818ecf5 --- /dev/null +++ b/doc/plzip.texi @@ -0,0 +1,897 @@ +\input texinfo @c -*-texinfo-*- +@c %**start of header +@setfilename plzip.info +@documentencoding ISO-8859-15 +@settitle Plzip Manual +@finalout +@c %**end of header + +@set UPDATED 24 January 2022 +@set VERSION 1.10 + +@dircategory Compression +@direntry +* Plzip: (plzip). Massively parallel implementation of lzip +@end direntry + + +@ifnothtml +@titlepage +@title Plzip +@subtitle Massively parallel implementation of lzip +@subtitle for Plzip version @value{VERSION}, @value{UPDATED} +@author by Antonio Diaz Diaz + +@page +@vskip 0pt plus 1filll +@end titlepage + +@contents +@end ifnothtml + +@ifnottex +@node Top +@top + +This manual is for Plzip (version @value{VERSION}, @value{UPDATED}). + +@menu +* Introduction:: Purpose and features of plzip +* Output:: Meaning of plzip's output +* Invoking plzip:: Command line interface +* Program design:: Internal structure of plzip +* Memory requirements:: Memory required to compress and decompress +* Minimum file sizes:: Minimum file sizes required for full speed +* File format:: Detailed format of the compressed file +* Trailing data:: Extra data appended to the file +* Examples:: A small tutorial with examples +* Problems:: Reporting bugs +* Concept index:: Index of concepts +@end menu + +@sp 1 +Copyright @copyright{} 2009-2022 Antonio Diaz Diaz. + +This manual is free documentation: you have unlimited permission to copy, +distribute, and modify it. +@end ifnottex + + +@node Introduction +@chapter Introduction +@cindex introduction + +@uref{http://www.nongnu.org/lzip/plzip.html,,Plzip} +is a massively parallel (multi-threaded) implementation of lzip, fully +compatible with lzip 1.4 or newer. Plzip uses the compression library +@uref{http://www.nongnu.org/lzip/lzlib.html,,lzlib}. + +@uref{http://www.nongnu.org/lzip/lzip.html,,Lzip} +is a lossless data compressor with a user interface similar to the one +of gzip or bzip2. Lzip uses a simplified form of the 'Lempel-Ziv-Markov +chain-Algorithm' (LZMA) stream format and provides a 3 factor integrity +checking to maximize interoperability and optimize safety. Lzip can compress +about as fast as gzip @w{(lzip -0)} or compress most files more than bzip2 +@w{(lzip -9)}. Decompression speed is intermediate between gzip and bzip2. +Lzip is better than gzip and bzip2 from a data recovery perspective. Lzip +has been designed, written, and tested with great care to replace gzip and +bzip2 as the standard general-purpose compressed format for unix-like +systems. + +Plzip can compress/decompress large files on multiprocessor machines much +faster than lzip, at the cost of a slightly reduced compression ratio (0.4 +to 2 percent larger compressed files). Note that the number of usable +threads is limited by file size; on files larger than a few GB plzip can use +hundreds of processors, but on files of only a few MB plzip is no faster +than lzip. @xref{Minimum file sizes}. + +For creation and manipulation of compressed tar archives +@uref{http://www.nongnu.org/lzip/manual/tarlz_manual.html,,tarlz} can be more +efficient than using tar and plzip because tarlz is able to keep the +alignment between tar members and lzip members. +@ifnothtml +@xref{Top,tarlz manual,,tarlz}. +@end ifnothtml + +The lzip file format is designed for data sharing and long-term archiving, +taking into account both data integrity and decoder availability: + +@itemize @bullet +@item +The lzip format provides very safe integrity checking and some data +recovery means. The program +@uref{http://www.nongnu.org/lzip/manual/lziprecover_manual.html#Data-safety,,lziprecover} +can repair bit flip errors (one of the most common forms of data corruption) +in lzip files, and provides data recovery capabilities, including +error-checked merging of damaged copies of a file. +@ifnothtml +@xref{Data safety,,,lziprecover}. +@end ifnothtml + +@item +The lzip format is as simple as possible (but not simpler). The lzip +manual provides the source code of a simple decompressor along with a +detailed explanation of how it works, so that with the only help of the +lzip manual it would be possible for a digital archaeologist to extract +the data from a lzip file long after quantum computers eventually +render LZMA obsolete. + +@item +Additionally the lzip reference implementation is copylefted, which +guarantees that it will remain free forever. +@end itemize + +A nice feature of the lzip format is that a corrupt byte is easier to repair +the nearer it is from the beginning of the file. Therefore, with the help of +lziprecover, losing an entire archive just because of a corrupt byte near +the beginning is a thing of the past. + +Plzip uses the same well-defined exit status values used by lzip, which +makes it safer than compressors returning ambiguous warning values (like +gzip) when it is used as a back end for other programs like tar or zutils. + +Plzip will automatically use for each file the largest dictionary size that +does not exceed neither the file size nor the limit given. Keep in mind that +the decompression memory requirement is affected at compression time by the +choice of dictionary size limit. @xref{Memory requirements}. + +When compressing, plzip replaces every file given in the command line +with a compressed version of itself, with the name "original_name.lz". +When decompressing, plzip attempts to guess the name for the decompressed +file from that of the compressed file as follows: + +@multitable {anyothername} {becomes} {anyothername.out} +@item filename.lz @tab becomes @tab filename +@item filename.tlz @tab becomes @tab filename.tar +@item anyothername @tab becomes @tab anyothername.out +@end multitable + +(De)compressing a file is much like copying or moving it. Therefore plzip +preserves the access and modification dates, permissions, and, when +possible, ownership of the file just as @w{@samp{cp -p}} does. (If the user ID or +the group ID can't be duplicated, the file permission bits S_ISUID and +S_ISGID are cleared). + +Plzip is able to read from some types of non-regular files if either the +option @samp{-c} or the option @samp{-o} is specified. + +Plzip will refuse to read compressed data from a terminal or write compressed +data to a terminal, as this would be entirely incomprehensible and might +leave the terminal in an abnormal state. + +Plzip will correctly decompress a file which is the concatenation of two or +more compressed files. The result is the concatenation of the corresponding +decompressed files. Integrity testing of concatenated compressed files is +also supported. + + +@node Output +@chapter Meaning of plzip's output +@cindex output + +The output of plzip looks like this: + +@example +plzip -v foo + foo: 6.676:1, 14.98% ratio, 85.02% saved, 450560 in, 67493 out. + +plzip -tvvv foo.lz + foo.lz: 6.676:1, 14.98% ratio, 85.02% saved. 450560 out, 67493 in. ok +@end example + +The meaning of each field is as follows: + +@table @code +@item N:1 +The compression ratio @w{(uncompressed_size / compressed_size)}, shown as +@w{N to 1}. + +@item ratio +The inverse compression ratio @w{(compressed_size / uncompressed_size)}, +shown as a percentage. A decimal ratio is easily obtained by moving the +decimal point two places to the left; @w{14.98% = 0.1498}. + +@item saved +The space saved by compression @w{(1 - ratio)}, shown as a percentage. + +@item in +Size of the input data. This is the uncompressed size when compressing, or +the compressed size when decompressing or testing. Note that plzip always +prints the uncompressed size before the compressed size when compressing, +decompressing, testing, or listing. + +@item out +Size of the output data. This is the compressed size when compressing, or +the decompressed size when decompressing or testing. + +@end table + +When decompressing or testing at verbosity level 4 (-vvvv), the dictionary +size used to compress the file is also shown. + +LANGUAGE NOTE: Uncompressed = not compressed = plain data; it may never have +been compressed. Decompressed is used to refer to data which have undergone +the process of decompression. + + +@node Invoking plzip +@chapter Invoking plzip +@cindex invoking +@cindex options +@cindex usage +@cindex version + +The format for running plzip is: + +@example +plzip [@var{options}] [@var{files}] +@end example + +@noindent +If no file names are specified, plzip compresses (or decompresses) from +standard input to standard output. A hyphen @samp{-} used as a @var{file} +argument means standard input. It can be mixed with other @var{files} and is +read just once, the first time it appears in the command line. + +plzip supports the following +@uref{http://www.nongnu.org/arg-parser/manual/arg_parser_manual.html#Argument-syntax,,options}: +@ifnothtml +@xref{Argument syntax,,,arg_parser}. +@end ifnothtml + +@table @code +@item -h +@itemx --help +Print an informative help message describing the options and exit. + +@item -V +@itemx --version +Print the version number of plzip on the standard output and exit. +This version number should be included in all bug reports. + +@anchor{--trailing-error} +@item -a +@itemx --trailing-error +Exit with error status 2 if any remaining input is detected after +decompressing the last member. Such remaining input is usually trailing +garbage that can be safely ignored. @xref{concat-example}. + +@anchor{--data-size} +@item -B @var{bytes} +@itemx --data-size=@var{bytes} +When compressing, set the size in bytes of the input data blocks. The +input file will be divided in chunks of this size before compression is +performed. Valid values range from @w{8 KiB} to @w{1 GiB}. Default value +is two times the dictionary size, except for option @samp{-0} where it +defaults to @w{1 MiB}. Plzip will reduce the dictionary size if it is +larger than the data size specified. @xref{Minimum file sizes}. + +@item -c +@itemx --stdout +Compress or decompress to standard output; keep input files unchanged. If +compressing several files, each file is compressed independently. This +option (or @samp{-o}) is needed when reading from a named pipe (fifo) or +from a device. Use @w{@samp{lziprecover -cd -i}} to recover as much of the +decompressed data as possible when decompressing a corrupt file. @samp{-c} +overrides @samp{-o}. @samp{-c} has no effect when testing or listing. + +@item -d +@itemx --decompress +Decompress the files specified. If a file does not exist, can't be opened, +or the destination file already exists and @samp{--force} has not been +specified, plzip continues decompressing the rest of the files and exits with +error status 1. If a file fails to decompress, or is a terminal, plzip exits +immediately with error status 2 without decompressing the rest of the files. +A terminal is considered an uncompressed file, and therefore invalid. + +@item -f +@itemx --force +Force overwrite of output files. + +@item -F +@itemx --recompress +When compressing, force re-compression of files whose name already has +the @samp{.lz} or @samp{.tlz} suffix. + +@item -k +@itemx --keep +Keep (don't delete) input files during compression or decompression. + +@item -l +@itemx --list +Print the uncompressed size, compressed size, and percentage saved of the +files specified. Trailing data are ignored. The values produced are correct +even for multimember files. If more than one file is given, a final line +containing the cumulative sizes is printed. With @samp{-v}, the dictionary +size, the number of members in the file, and the amount of trailing data (if +any) are also printed. With @samp{-vv}, the positions and sizes of each +member in multimember files are also printed. + +If any file is damaged, does not exist, can't be opened, or is not regular, +the final exit status will be @w{> 0}. @samp{-lq} can be used to verify +quickly (without decompressing) the structural integrity of the files +specified. (Use @samp{--test} to verify the data integrity). @samp{-alq} +additionally verifies that none of the files specified contain trailing data. + +@item -m @var{bytes} +@itemx --match-length=@var{bytes} +When compressing, set the match length limit in bytes. After a match +this long is found, the search is finished. Valid values range from 5 to +273. Larger values usually give better compression ratios but longer +compression times. + +@item -n @var{n} +@itemx --threads=@var{n} +Set the maximum number of worker threads, overriding the system's default. +Valid values range from 1 to "as many as your system can support". If this +option is not used, plzip tries to detect the number of processors in the +system and use it as default value. When compressing on a @w{32 bit} system, +plzip tries to limit the memory use to under @w{2.22 GiB} (4 worker threads +at level -9) by reducing the number of threads below the system's default. +@w{@samp{plzip --help}} shows the system's default value. + +Plzip starts the number of threads required by each file without exceeding +the value specified. Note that the number of usable threads is limited to +@w{ceil( file_size / data_size )} during compression (@pxref{Minimum file +sizes}), and to the number of members in the input during decompression. You +can find the number of members in a lzip file by running +@w{@samp{plzip -lv file.lz}}. + +@item -o @var{file} +@itemx --output=@var{file} +If @samp{-c} has not been also specified, write the (de)compressed output to +@var{file}; keep input files unchanged. If compressing several files, each +file is compressed independently. This option (or @samp{-c}) is needed when +reading from a named pipe (fifo) or from a device. @w{@samp{-o -}} is +equivalent to @samp{-c}. @samp{-o} has no effect when testing or listing. + +In order to keep backward compatibility with plzip versions prior to 1.9, +when compressing from standard input and no other file names are given, the +extension @samp{.lz} is appended to @var{file} unless it already ends in +@samp{.lz} or @samp{.tlz}. This feature will be removed in a future version +of plzip. Meanwhile, redirection may be used instead of @samp{-o} to write +the compressed output to a file without the extension @samp{.lz} in its +name: @w{@samp{plzip < file > foo}}. + +@item -q +@itemx --quiet +Quiet operation. Suppress all messages. + +@item -s @var{bytes} +@itemx --dictionary-size=@var{bytes} +When compressing, set the dictionary size limit in bytes. Plzip will use +for each file the largest dictionary size that does not exceed neither +the file size nor this limit. Valid values range from @w{4 KiB} to +@w{512 MiB}. Values 12 to 29 are interpreted as powers of two, meaning +2^12 to 2^29 bytes. Dictionary sizes are quantized so that they can be +coded in just one byte (@pxref{coded-dict-size}). If the size specified +does not match one of the valid sizes, it will be rounded upwards by +adding up to @w{(@var{bytes} / 8)} to it. + +For maximum compression you should use a dictionary size limit as large +as possible, but keep in mind that the decompression memory requirement +is affected at compression time by the choice of dictionary size limit. + +@item -t +@itemx --test +Check integrity of the files specified, but don't decompress them. This +really performs a trial decompression and throws away the result. Use it +together with @samp{-v} to see information about the files. If a file +fails the test, does not exist, can't be opened, or is a terminal, plzip +continues checking the rest of the files. A final diagnostic is shown at +verbosity level 1 or higher if any file fails the test when testing +multiple files. + +@item -v +@itemx --verbose +Verbose mode.@* +When compressing, show the compression ratio and size for each file +processed.@* +When decompressing or testing, further -v's (up to 4) increase the +verbosity level, showing status, compression ratio, dictionary size, +decompressed size, and compressed size.@* +Two or more @samp{-v} options show the progress of (de)compression, +except for single-member files. + +@item -0 .. -9 +Compression level. Set the compression parameters (dictionary size and +match length limit) as shown in the table below. The default compression +level is @samp{-6}, equivalent to @w{@samp{-s8MiB -m36}}. Note that +@samp{-9} can be much slower than @samp{-0}. These options have no +effect when decompressing, testing, or listing. + +The bidimensional parameter space of LZMA can't be mapped to a linear +scale optimal for all files. If your files are large, very repetitive, +etc, you may need to use the options @samp{--dictionary-size} and +@samp{--match-length} directly to achieve optimal performance. + +If several compression levels or @samp{-s} or @samp{-m} options are +given, the last setting is used. For example @w{@samp{-9 -s64MiB}} is +equivalent to @w{@samp{-s64MiB -m273}} + +@multitable {Level} {Dictionary size (-s)} {Match length limit (-m)} +@item Level @tab Dictionary size (-s) @tab Match length limit (-m) +@item -0 @tab 64 KiB @tab 16 bytes +@item -1 @tab 1 MiB @tab 5 bytes +@item -2 @tab 1.5 MiB @tab 6 bytes +@item -3 @tab 2 MiB @tab 8 bytes +@item -4 @tab 3 MiB @tab 12 bytes +@item -5 @tab 4 MiB @tab 20 bytes +@item -6 @tab 8 MiB @tab 36 bytes +@item -7 @tab 16 MiB @tab 68 bytes +@item -8 @tab 24 MiB @tab 132 bytes +@item -9 @tab 32 MiB @tab 273 bytes +@end multitable + +@item --fast +@itemx --best +Aliases for GNU gzip compatibility. + +@item --loose-trailing +When decompressing, testing, or listing, allow trailing data whose first +bytes are so similar to the magic bytes of a lzip header that they can +be confused with a corrupt header. Use this option if a file triggers a +"corrupt header" error and the cause is not indeed a corrupt header. + +@item --in-slots=@var{n} +Number of @w{1 MiB} input packets buffered per worker thread when +decompressing from non-seekable input. Increasing the number of packets +may increase decompression speed, but requires more memory. Valid values +range from 1 to 64. The default value is 4. + +@item --out-slots=@var{n} +Number of @w{1 MiB} output packets buffered per worker thread when +decompressing to non-seekable output. Increasing the number of packets +may increase decompression speed, but requires more memory. Valid values +range from 1 to 1024. The default value is 64. + +@item --check-lib +Compare the +@uref{http://www.nongnu.org/lzip/manual/lzlib_manual.html#Library-version,,version of lzlib} +used to compile plzip with the version actually being used at run time and +exit. Report any differences found. Exit with error status 1 if differences +are found. A mismatch may indicate that lzlib is not correctly installed or +that a different version of lzlib has been installed after compiling plzip. +Exit with error status 2 if LZ_API_VERSION and LZ_version_string don't +match. @w{@samp{plzip -v --check-lib}} shows the version of lzlib being used +and the value of LZ_API_VERSION (if defined). +@ifnothtml +@xref{Library version,,,lzlib}. +@end ifnothtml + +@end table + +Numbers given as arguments to options may be followed by a multiplier +and an optional @samp{B} for "byte". + +Table of SI and binary prefixes (unit multipliers): + +@multitable {Prefix} {kilobyte (10^3 = 1000)} {|} {Prefix} {kibibyte (2^10 = 1024)} +@item Prefix @tab Value @tab | @tab Prefix @tab Value +@item k @tab kilobyte (10^3 = 1000) @tab | @tab Ki @tab kibibyte (2^10 = 1024) +@item M @tab megabyte (10^6) @tab | @tab Mi @tab mebibyte (2^20) +@item G @tab gigabyte (10^9) @tab | @tab Gi @tab gibibyte (2^30) +@item T @tab terabyte (10^12) @tab | @tab Ti @tab tebibyte (2^40) +@item P @tab petabyte (10^15) @tab | @tab Pi @tab pebibyte (2^50) +@item E @tab exabyte (10^18) @tab | @tab Ei @tab exbibyte (2^60) +@item Z @tab zettabyte (10^21) @tab | @tab Zi @tab zebibyte (2^70) +@item Y @tab yottabyte (10^24) @tab | @tab Yi @tab yobibyte (2^80) +@end multitable + +@sp 1 +Exit status: 0 for a normal exit, 1 for environmental problems (file not +found, invalid flags, I/O errors, etc), 2 to indicate a corrupt or invalid +input file, 3 for an internal consistency error (e.g., bug) which caused +plzip to panic. + + +@node Program design +@chapter Internal structure of plzip +@cindex program design + +When compressing, plzip divides the input file into chunks and compresses as +many chunks simultaneously as worker threads are chosen, creating a +multimember compressed file. Each chunk is compressed in-place (using the +same buffer for input and output), reducing the amount of RAM required. + +When decompressing, plzip decompresses as many members simultaneously as +worker threads are chosen. Files that were compressed with lzip will not +be decompressed faster than using lzip (unless the option @samp{-b} was used) +because lzip usually produces single-member files, which can't be +decompressed in parallel. + +For each input file, a splitter thread and several worker threads are +created, acting the main thread as muxer (multiplexer) thread. A "packet +courier" takes care of data transfers among threads and limits the +maximum number of data blocks (packets) being processed simultaneously. + +The splitter reads data blocks from the input file, and distributes them +to the workers. The workers (de)compress the blocks received from the +splitter. The muxer collects processed packets from the workers, and +writes them to the output file. + +@verbatim + .------------. + ,-->| worker 0 |--, + | `------------' | +.-------. .----------. | .------------. | .-------. .--------. +| input |-->| splitter |-+-->| worker 1 |--+-->| muxer |-->| output | +| file | `----------' | `------------' | `-------' | file | +`-------' | ... | `--------' + | .------------. | + `-->| worker N-1 |--' + `------------' +@end verbatim + +When decompressing from a regular file, the splitter is removed and the +workers read directly from the input file. If the output file is also a +regular file, the muxer is also removed and the workers write directly +to the output file. With these optimizations, the use of RAM is greatly +reduced and the decompression speed of large files with many members is +only limited by the number of processors available and by I/O speed. + + +@node Memory requirements +@chapter Memory required to compress and decompress +@cindex memory requirements + +The amount of memory required @strong{per worker thread} for decompression +or testing is approximately the following: + +@itemize @bullet +@item +For decompression of a regular (seekable) file to another regular file, +or for testing of a regular file; the dictionary size. + +@item +For testing of a non-seekable file or of standard input; the dictionary +size plus @w{1 MiB} plus up to the number of @w{1 MiB} input packets +buffered (4 by default). + +@item +For decompression of a regular file to a non-seekable file or to +standard output; the dictionary size plus up to the number of @w{1 MiB} +output packets buffered (64 by default). + +@item +For decompression of a non-seekable file or of standard input; the +dictionary size plus @w{1 MiB} plus up to the number of @w{1 MiB} input +and output packets buffered (68 by default). +@end itemize + +@noindent +The amount of memory required @strong{per worker thread} for compression +is approximately the following: + +@itemize @bullet +@item +For compression at level -0; @w{1.5 MiB} plus 3.375 times the data size +(@pxref{--data-size}). Default is @w{4.875 MiB}. + +@item +For compression at other levels; 11 times the dictionary size plus 3.375 +times the data size. Default is @w{142 MiB}. +@end itemize + +@noindent +The following table shows the memory required @strong{per thread} for +compression at a given level, using the default data size for each level: + +@multitable {Level} {Memory required} +@item Level @tab Memory required +@item -0 @tab 4.875 MiB +@item -1 @tab 17.75 MiB +@item -2 @tab 26.625 MiB +@item -3 @tab 35.5 MiB +@item -4 @tab 53.25 MiB +@item -5 @tab 71 MiB +@item -6 @tab 142 MiB +@item -7 @tab 284 MiB +@item -8 @tab 426 MiB +@item -9 @tab 568 MiB +@end multitable + + +@node Minimum file sizes +@chapter Minimum file sizes required for full compression speed +@cindex minimum file sizes + +When compressing, plzip divides the input file into chunks and +compresses as many chunks simultaneously as worker threads are chosen, +creating a multimember compressed file. + +For this to work as expected (and roughly multiply the compression speed +by the number of available processors), the uncompressed file must be at +least as large as the number of worker threads times the chunk size +(@pxref{--data-size}). Else some processors will not get any data to +compress, and compression will be proportionally slower. The maximum +speed increase achievable on a given file is limited by the ratio +@w{(file_size / data_size)}. For example, a tarball the size of gcc or +linux will scale up to 10 or 14 processors at level -9. + +The following table shows the minimum uncompressed file size needed for +full use of N processors at a given compression level, using the default +data size for each level: + +@multitable {Processors} {512 MiB} {512 MiB} {512 MiB} {512 MiB} {512 MiB} {512 MiB} +@headitem Processors @tab 2 @tab 4 @tab 8 @tab 16 @tab 64 @tab 256 +@item Level +@item -0 @tab 2 MiB @tab 4 MiB @tab 8 MiB @tab 16 MiB @tab 64 MiB @tab 256 MiB +@item -1 @tab 4 MiB @tab 8 MiB @tab 16 MiB @tab 32 MiB @tab 128 MiB @tab 512 MiB +@item -2 @tab 6 MiB @tab 12 MiB @tab 24 MiB @tab 48 MiB @tab 192 MiB @tab 768 MiB +@item -3 @tab 8 MiB @tab 16 MiB @tab 32 MiB @tab 64 MiB @tab 256 MiB @tab 1 GiB +@item -4 @tab 12 MiB @tab 24 MiB @tab 48 MiB @tab 96 MiB @tab 384 MiB @tab 1.5 GiB +@item -5 @tab 16 MiB @tab 32 MiB @tab 64 MiB @tab 128 MiB @tab 512 MiB @tab 2 GiB +@item -6 @tab 32 MiB @tab 64 MiB @tab 128 MiB @tab 256 MiB @tab 1 GiB @tab 4 GiB +@item -7 @tab 64 MiB @tab 128 MiB @tab 256 MiB @tab 512 MiB @tab 2 GiB @tab 8 GiB +@item -8 @tab 96 MiB @tab 192 MiB @tab 384 MiB @tab 768 MiB @tab 3 GiB @tab 12 GiB +@item -9 @tab 128 MiB @tab 256 MiB @tab 512 MiB @tab 1 GiB @tab 4 GiB @tab 16 GiB +@end multitable + + +@node File format +@chapter File format +@cindex file format + +Perfection is reached, not when there is no longer anything to add, but +when there is no longer anything to take away.@* +--- Antoine de Saint-Exupery + +@sp 1 +In the diagram below, a box like this: + +@verbatim ++---+ +| | <-- the vertical bars might be missing ++---+ +@end verbatim + +represents one byte; a box like this: + +@verbatim ++==============+ +| | ++==============+ +@end verbatim + +represents a variable number of bytes. + +@sp 1 +A lzip file consists of a series of independent "members" (compressed data +sets). The members simply appear one after another in the file, with no +additional information before, between, or after them. Each member can +encode in compressed form up to @w{16 EiB - 1 byte} of uncompressed data. +The size of a multimember file is unlimited. + +Each member has the following structure: + +@verbatim ++--+--+--+--+----+----+=============+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ +| ID string | VN | DS | LZMA stream | CRC32 | Data size | Member size | ++--+--+--+--+----+----+=============+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ +@end verbatim + +All multibyte values are stored in little endian order. + +@table @samp +@item ID string (the "magic" bytes) +A four byte string, identifying the lzip format, with the value "LZIP" +(0x4C, 0x5A, 0x49, 0x50). + +@item VN (version number, 1 byte) +Just in case something needs to be modified in the future. 1 for now. + +@anchor{coded-dict-size} +@item DS (coded dictionary size, 1 byte) +The dictionary size is calculated by taking a power of 2 (the base size) +and subtracting from it a fraction between 0/16 and 7/16 of the base size.@* +Bits 4-0 contain the base 2 logarithm of the base size (12 to 29).@* +Bits 7-5 contain the numerator of the fraction (0 to 7) to subtract +from the base size to obtain the dictionary size.@* +Example: 0xD3 = 2^19 - 6 * 2^15 = 512 KiB - 6 * 32 KiB = 320 KiB@* +Valid values for dictionary size range from 4 KiB to 512 MiB. + +@item LZMA stream +The LZMA stream, finished by an "End Of Stream" marker. Uses default values +for encoder properties. +@ifnothtml +@xref{Stream format,,,lzip}, +@end ifnothtml +@ifhtml +See +@uref{http://www.nongnu.org/lzip/manual/lzip_manual.html#Stream-format,,Stream format} +@end ifhtml +for a complete description. + +@item CRC32 (4 bytes) +Cyclic Redundancy Check (CRC) of the original uncompressed data. + +@item Data size (8 bytes) +Size of the original uncompressed data. + +@item Member size (8 bytes) +Total size of the member, including header and trailer. This field acts +as a distributed index, allows the verification of stream integrity, and +facilitates the safe recovery of undamaged members from multimember files. +Member size should be limited to @w{2 PiB} to prevent the data size field +from overflowing. + +@end table + + +@node Trailing data +@chapter Extra data appended to the file +@cindex trailing data + +Sometimes extra data are found appended to a lzip file after the last +member. Such trailing data may be: + +@itemize @bullet +@item +Padding added to make the file size a multiple of some block size, for +example when writing to a tape. It is safe to append any amount of +padding zero bytes to a lzip file. + +@item +Useful data added by the user; a cryptographically secure hash, a +description of file contents, etc. It is safe to append any amount of +text to a lzip file as long as none of the first four bytes of the text +match the corresponding byte in the string "LZIP", and the text does not +contain any zero bytes (null characters). Nonzero bytes and zero bytes +can't be safely mixed in trailing data. + +@item +Garbage added by some not totally successful copy operation. + +@item +Malicious data added to the file in order to make its total size and +hash value (for a chosen hash) coincide with those of another file. + +@item +In rare cases, trailing data could be the corrupt header of another +member. In multimember or concatenated files the probability of +corruption happening in the magic bytes is 5 times smaller than the +probability of getting a false positive caused by the corruption of the +integrity information itself. Therefore it can be considered to be below +the noise level. Additionally, the test used by plzip to discriminate +trailing data from a corrupt header has a Hamming distance (HD) of 3, +and the 3 bit flips must happen in different magic bytes for the test to +fail. In any case, the option @samp{--trailing-error} guarantees that +any corrupt header will be detected. +@end itemize + +Trailing data are in no way part of the lzip file format, but tools +reading lzip files are expected to behave as correctly and usefully as +possible in the presence of trailing data. + +Trailing data can be safely ignored in most cases. In some cases, like +that of user-added data, they are expected to be ignored. In those cases +where a file containing trailing data must be rejected, the option +@samp{--trailing-error} can be used. @xref{--trailing-error}. + + +@node Examples +@chapter A small tutorial with examples +@cindex examples + +WARNING! Even if plzip is bug-free, other causes may result in a corrupt +compressed file (bugs in the system libraries, memory errors, etc). +Therefore, if the data you are going to compress are important, give the +option @samp{--keep} to plzip and don't remove the original file until you +verify the compressed file with a command like +@w{@samp{plzip -cd file.lz | cmp file -}}. Most RAM errors happening during +compression can only be detected by comparing the compressed file with the +original because the corruption happens before plzip compresses the RAM +contents, resulting in a valid compressed file containing wrong data. + +@sp 1 +@noindent +Example 1: Extract all the files from archive @samp{foo.tar.lz}. + +@example + tar -xf foo.tar.lz +or + plzip -cd foo.tar.lz | tar -xf - +@end example + +@sp 1 +@noindent +Example 2: Replace a regular file with its compressed version @samp{file.lz} +and show the compression ratio. + +@example +plzip -v file +@end example + +@sp 1 +@noindent +Example 3: Like example 2 but the created @samp{file.lz} has a block size of +@w{1 MiB}. The compression ratio is not shown. + +@example +plzip -B 1MiB file +@end example + +@sp 1 +@noindent +Example 4: Restore a regular file from its compressed version +@samp{file.lz}. If the operation is successful, @samp{file.lz} is removed. + +@example +plzip -d file.lz +@end example + +@sp 1 +@noindent +Example 5: Verify the integrity of the compressed file @samp{file.lz} and +show status. + +@example +plzip -tv file.lz +@end example + +@sp 1 +@anchor{concat-example} +@noindent +Example 6: The right way of concatenating the decompressed output of two or +more compressed files. @xref{Trailing data}. + +@example +Don't do this + cat file1.lz file2.lz file3.lz | plzip -d - +Do this instead + plzip -cd file1.lz file2.lz file3.lz +@end example + +@sp 1 +@noindent +Example 7: Decompress @samp{file.lz} partially until @w{10 KiB} of +decompressed data are produced. + +@example +plzip -cd file.lz | dd bs=1024 count=10 +@end example + +@sp 1 +@noindent +Example 8: Decompress @samp{file.lz} partially from decompressed byte at +offset 10000 to decompressed byte at offset 14999 (5000 bytes are produced). + +@example +plzip -cd file.lz | dd bs=1000 skip=10 count=5 +@end example + +@sp 1 +@noindent +Example 9: Compress a whole device in /dev/sdc and send the output to +@samp{file.lz}. + +@example + plzip -c /dev/sdc > file.lz +or + plzip /dev/sdc -o file.lz +@end example + + +@node Problems +@chapter Reporting bugs +@cindex bugs +@cindex getting help + +There are probably bugs in plzip. There are certainly errors and +omissions in this manual. If you report them, they will get fixed. If +you don't, no one will ever know about them and they will remain unfixed +for all eternity, if not longer. + +If you find a bug in plzip, please send electronic mail to +@email{lzip-bug@@nongnu.org}. Include the version number, which you can +find by running @w{@samp{plzip --version}} and +@w{@samp{plzip -v --check-lib}}. + + +@node Concept index +@unnumbered Concept index + +@printindex cp + +@bye |