From b7c15c31519dc44c1f691e0466badd556ffe9423 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 18:18:56 +0200 Subject: Adding upstream version 3.7.10. Signed-off-by: Daniel Baumann --- README_FILES/SMTPD_PROXY_README | 244 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 244 insertions(+) create mode 100644 README_FILES/SMTPD_PROXY_README (limited to 'README_FILES/SMTPD_PROXY_README') diff --git a/README_FILES/SMTPD_PROXY_README b/README_FILES/SMTPD_PROXY_README new file mode 100644 index 0000000..a3707ea --- /dev/null +++ b/README_FILES/SMTPD_PROXY_README @@ -0,0 +1,244 @@ +PPoossttffiixx BBeeffoorree--QQuueeuuee CCoonntteenntt FFiilltteerr + +------------------------------------------------------------------------------- + +WWAARRNNIINNGG + +The before-queue content filtering feature described in this document limits +the amount of mail that a site can handle. See the "Pros and Cons" section +below for details. + +TThhee PPoossttffiixx bbeeffoorree--qquueeuuee ccoonntteenntt ffiilltteerr ffeeaattuurree + +As of version 2.1, the Postfix SMTP server can forward all incoming mail to a +content filtering proxy server that inspects all mail BEFORE it is stored in +the Postfix mail queue. It is roughly equivalent in capabilities to the +approach described in MILTER_README, except that the latter uses a dedicated +protocol instead of SMTP. + +The before-queue content filter is meant to be used as follows: + + Postfix BBeeffoorree Postfix Postfix Postfix smtp + Internet -> SMTP -> qquueeuuee -> SMTP -> cleanup -> queue -< local + server ffiilltteerr server server virtual + +The before-queue content filter is not to be confused with the approach +described in the FILTER_README document, where mail is filtered AFTER it is +stored in the Postfix mail queue. + +This document describes the following topics: + + * Principles of operation + * Pros and cons of before-queue content filtering + * Configuring the Postfix SMTP pass-through proxy feature + * Configuration parameters + * How Postfix talks to the before-queue content filter + +PPrriinncciipplleess ooff ooppeerraattiioonn + +As shown in the diagram above, the before-queue filter sits between two Postfix +SMTP server processes. + + * The before-filter Postfix SMTP server accepts connections from the Internet + and does the usual relay access control, SASL authentication, TLS + negotiation, RBL lookups, rejecting non-existent sender or recipient + addresses, etc. + + * The before-queue filter receives unfiltered mail content from Postfix and + does one of the following: + + 1. Re-inject the mail back into Postfix via SMTP, perhaps after changing + its content and/or destination. + + 2. Discard or quarantine the mail. + + 3. Reject the mail by sending a suitable SMTP status code back to Postfix. + Postfix passes the status back to the remote SMTP client. This way, + Postfix does not have to send a bounce message. + + * The after-filter Postfix SMTP server receives mail from the content filter. + From then on Postfix processes the mail as usual. + +The before-queue content filter described here works just like the after-queue +content filter described in the FILTER_README document. In many cases you can +use the same software, within the limitations as discussed in the "Pros and +Cons" section below. + +PPrrooss aanndd ccoonnss ooff bbeeffoorree--qquueeuuee ccoonntteenntt ffiilltteerriinngg + + * Pro: Postfix can reject mail before the incoming SMTP mail transfer + completes, so that Postfix does not have to send rejected mail back to the + sender (which is usually forged anyway). Mail that is not accepted remains + the responsibility of the remote SMTP client. + + * Con: The remote SMTP client expects an SMTP reply within a deadline. As the + system load increases, fewer and fewer CPU cycles remain available to + answer within the deadline, and eventually you either have to stop + accepting mail or you have to stop filtering mail. It is for this reason + that the before-queue content filter limits the amount of mail that a site + can handle. + + * Con: Content filtering software can use lots of memory resources. You have + to reduce the number of simultaneous content filter processes so that a + burst of mail will not drive your system into the ground. + + o With Postfix versions 2.7 and later, SMTP clients will experience an + increase in the delay between the time the client sends "end-of- + message" and the time the Postfix SMTP server replies (here, the number + of before-filter SMTP server processes can be larger than the number of + filter processes). + + o With Postfix versions before 2.7, SMTP clients will experience an + increase in the delay before they can receive service (here, the number + of before-filter SMTP server processes is always equal to the number of + filter processes). + +CCoonnffiigguurriinngg tthhee PPoossttffiixx SSMMTTPP ppaassss--tthhrroouugghh pprrooxxyy ffeeaattuurree + +In the following example, the before-filter Postfix SMTP server gives mail to a +content filter that listens on localhost port 10025. The after-filter Postfix +SMTP server receives mail from the content filter via localhost port 10026. +From then on mail is processed as usual. + +The content filter itself is not described here. You can use any filter that is +SMTP enabled. For non-SMTP capable content filtering software, Bennett Todd's +SMTP proxy implements a nice Perl-based framework. See: https:// +web.archive.org/web/20151022025756/http://bent.latency.net/smtpprox/ or https:/ +/github.com/jnorell/smtpprox/ + + Postfix + Postfix filter on SMTP server Postfix Postfix + Internet -> SMTP server -> localhost -> on -> cleanup -> incoming + on port 25 port 10025 localhost server queue + port 10026 + +This is configured by editing the master.cf file: + + /etc/postfix/master.cf: + # ============================================================= + # service type private unpriv chroot wakeup maxproc command + # (yes) (yes) (yes) (never) (100) + # ============================================================= + # + # Before-filter SMTP server. Receive mail from the network and + # pass it to the content filter on localhost port 10025. + # + smtp inet n - n - 20 smtpd + -o smtpd_proxy_filter=127.0.0.1:10025 + -o smtpd_client_connection_count_limit=10 + # Postfix 2.7 and later performance feature. + # -o smtpd_proxy_options=speed_adjust + # + # After-filter SMTP server. Receive mail from the content filter + # on localhost port 10026. + # + 127.0.0.1:10026 inet n - n - - smtpd + -o smtpd_authorized_xforward_hosts=127.0.0.0/8 + -o smtpd_client_restrictions= + -o smtpd_helo_restrictions= + -o smtpd_sender_restrictions= + # Postfix 2.10 and later: specify empty smtpd_relay_restrictions. + -o smtpd_relay_restrictions= + -o smtpd_recipient_restrictions=permit_mynetworks,reject + -o smtpd_data_restrictions= + -o mynetworks=127.0.0.0/8 + -o receive_override_options=no_unknown_recipient_checks + +Note: do not specify spaces around the "=" or "," characters. + +The before-filter SMTP server entry is a modified version of the default +Postfix SMTP server entry that is normally configured at the top of the +master.cf file: + + * The number of SMTP sessions is reduced from the default 100 to only 20. + This prevents a burst of mail from running your system into the ground with + too many content filter processes. + + * The "-o smtpd_client_connection_count_limit=10" prevents one SMTP client + from using up all 20 SMTP server processes. This limit is not necessary if + you receive all mail from a trusted relay host. + + Note: this setting is available in Postfix version 2.2 and later. Earlier + Postfix versions will ignore it. + + * The "-o smtpd_proxy_filter=127.0.0.1:10025" tells the before-filter SMTP + server that it should give incoming mail to the content filter that listens + on localhost TCP port 10025. + + * The "-o smtpd_proxy_options=speed_adjust" tells the before-filter SMTP + server that it should receive an entire email message before it connects to + a content filter. This reduces the number of simultaneous filter processes. + + NOTE 1: When this option is turned on, a content filter must not + selectively reject recipients of a multi-recipient message. Rejecting all + recipients is OK, as is accepting all recipients. + + NOTE 2: This feature increases the minimum amount of free queue space by + $message_size_limit. The extra space is needed to save the message to a + temporary file. + + * Postfix >= 2.3 supports both TCP and UNIX-domain filters. The above filter + could be specified as "inet:127.0.0.1:10025". To specify a UNIX-domain + filter, specify "unix:pathname". A relative pathname is interpreted + relative to the Postfix queue directory. + +The after-filter SMTP server is a new master.cf entry: + + * The "127.0.0.1:10026" makes the after-filter SMTP server listen on the + localhost address only, without exposing it to the network. NEVER expose + the after-filter SMTP server to the Internet :-) + + * The "-o smtpd_authorized_xforward_hosts=127.0.0.0/8" allows the after- + filter SMTP server to receive remote SMTP client information from the + before-filter SMTP server, so that the after-filter Postfix daemons log the + remote SMTP client information instead of logging localhost[127.0.0.1]. + + * The other after-filter SMTP server settings avoid duplication of work that + is already done in the "before filter" SMTP server. + +By default, the filter has 100 seconds to do its work. If it takes longer then +Postfix gives up and reports an error to the remote SMTP client. You can +increase this time limit (see the "Configuration parameters" section below) but +doing so is pointless because you can't control when the remote SMTP client +times out. + +CCoonnffiigguurraattiioonn ppaarraammeetteerrss + +Parameters that control proxying: + + * smtpd_proxy_filter (syntax: host:port): The host and TCP port of the + before-queue content filter. When no host or host: is specified here, + localhost is assumed. + + * smtpd_proxy_timeout (default: 100s): Timeout for connecting to the before- + queue content filter and for sending and receiving commands and data. All + proxy errors are logged to the maillog file. For privacy reasons, all the + remote SMTP client sees is "451 Error: queue file write error". It would + not be right to disclose internal details to strangers. + + * smtpd_proxy_ehlo (default: $myhostname): The hostname to use when sending + an EHLO command to the before-queue content filter. + +HHooww PPoossttffiixx ttaallkkss ttoo tthhee bbeeffoorree--qquueeuuee ccoonntteenntt ffiilltteerr + +The before-filter Postfix SMTP server connects to the content filter, delivers +one message, and disconnects. While sending mail into the content filter, +Postfix speaks ESMTP but uses no command pipelining. Postfix generates its own +EHLO, XFORWARD (for logging the remote client IP address instead of localhost +[127.0.0.1]), DATA and QUIT commands, and forwards unmodified copies of all the +MAIL FROM and RCPT TO commands that the before-filter Postfix SMTP server +didn't reject itself. Postfix sends no other SMTP commands. + +The content filter should accept the same MAIL FROM and RCPT TO command syntax +as the before-filter Postfix SMTP server, and should forward the commands +without modification to the after-filter SMTP server. If the content filter or +after-filter SMTP server does not support all the ESMTP features that the +before-filter Postfix SMTP server supports, then the missing features must be +turned off in the before-filter Postfix SMTP server with the +smtpd_discard_ehlo_keywords parameter. + +When the filter rejects content, it should send a negative SMTP response back +to the before-filter Postfix SMTP server, and it should abort the connection +with the after-filter Postfix SMTP server without completing the SMTP +conversation with the after-filter Postfix SMTP server. + -- cgit v1.2.3