diff options
Diffstat (limited to '')
-rw-r--r-- | src/include/common/int128.h | 276 |
1 files changed, 276 insertions, 0 deletions
diff --git a/src/include/common/int128.h b/src/include/common/int128.h new file mode 100644 index 0000000..a83edc7 --- /dev/null +++ b/src/include/common/int128.h @@ -0,0 +1,276 @@ +/*------------------------------------------------------------------------- + * + * int128.h + * Roll-our-own 128-bit integer arithmetic. + * + * We make use of the native int128 type if there is one, otherwise + * implement things the hard way based on two int64 halves. + * + * See src/tools/testint128.c for a simple test harness for this file. + * + * Copyright (c) 2017-2020, PostgreSQL Global Development Group + * + * src/include/common/int128.h + * + *------------------------------------------------------------------------- + */ +#ifndef INT128_H +#define INT128_H + +/* + * For testing purposes, use of native int128 can be switched on/off by + * predefining USE_NATIVE_INT128. + */ +#ifndef USE_NATIVE_INT128 +#ifdef HAVE_INT128 +#define USE_NATIVE_INT128 1 +#else +#define USE_NATIVE_INT128 0 +#endif +#endif + + +#if USE_NATIVE_INT128 + +typedef int128 INT128; + +/* + * Add an unsigned int64 value into an INT128 variable. + */ +static inline void +int128_add_uint64(INT128 *i128, uint64 v) +{ + *i128 += v; +} + +/* + * Add a signed int64 value into an INT128 variable. + */ +static inline void +int128_add_int64(INT128 *i128, int64 v) +{ + *i128 += v; +} + +/* + * Add the 128-bit product of two int64 values into an INT128 variable. + * + * XXX with a stupid compiler, this could actually be less efficient than + * the other implementation; maybe we should do it by hand always? + */ +static inline void +int128_add_int64_mul_int64(INT128 *i128, int64 x, int64 y) +{ + *i128 += (int128) x * (int128) y; +} + +/* + * Compare two INT128 values, return -1, 0, or +1. + */ +static inline int +int128_compare(INT128 x, INT128 y) +{ + if (x < y) + return -1; + if (x > y) + return 1; + return 0; +} + +/* + * Widen int64 to INT128. + */ +static inline INT128 +int64_to_int128(int64 v) +{ + return (INT128) v; +} + +/* + * Convert INT128 to int64 (losing any high-order bits). + * This also works fine for casting down to uint64. + */ +static inline int64 +int128_to_int64(INT128 val) +{ + return (int64) val; +} + +#else /* !USE_NATIVE_INT128 */ + +/* + * We lay out the INT128 structure with the same content and byte ordering + * that a native int128 type would (probably) have. This makes no difference + * for ordinary use of INT128, but allows union'ing INT128 with int128 for + * testing purposes. + */ +typedef struct +{ +#ifdef WORDS_BIGENDIAN + int64 hi; /* most significant 64 bits, including sign */ + uint64 lo; /* least significant 64 bits, without sign */ +#else + uint64 lo; /* least significant 64 bits, without sign */ + int64 hi; /* most significant 64 bits, including sign */ +#endif +} INT128; + +/* + * Add an unsigned int64 value into an INT128 variable. + */ +static inline void +int128_add_uint64(INT128 *i128, uint64 v) +{ + /* + * First add the value to the .lo part, then check to see if a carry needs + * to be propagated into the .hi part. A carry is needed if both inputs + * have high bits set, or if just one input has high bit set while the new + * .lo part doesn't. Remember that .lo part is unsigned; we cast to + * signed here just as a cheap way to check the high bit. + */ + uint64 oldlo = i128->lo; + + i128->lo += v; + if (((int64) v < 0 && (int64) oldlo < 0) || + (((int64) v < 0 || (int64) oldlo < 0) && (int64) i128->lo >= 0)) + i128->hi++; +} + +/* + * Add a signed int64 value into an INT128 variable. + */ +static inline void +int128_add_int64(INT128 *i128, int64 v) +{ + /* + * This is much like the above except that the carry logic differs for + * negative v. Ordinarily we'd need to subtract 1 from the .hi part + * (corresponding to adding the sign-extended bits of v to it); but if + * there is a carry out of the .lo part, that cancels and we do nothing. + */ + uint64 oldlo = i128->lo; + + i128->lo += v; + if (v >= 0) + { + if ((int64) oldlo < 0 && (int64) i128->lo >= 0) + i128->hi++; + } + else + { + if (!((int64) oldlo < 0 || (int64) i128->lo >= 0)) + i128->hi--; + } +} + +/* + * INT64_AU32 extracts the most significant 32 bits of int64 as int64, while + * INT64_AL32 extracts the least significant 32 bits as uint64. + */ +#define INT64_AU32(i64) ((i64) >> 32) +#define INT64_AL32(i64) ((i64) & UINT64CONST(0xFFFFFFFF)) + +/* + * Add the 128-bit product of two int64 values into an INT128 variable. + */ +static inline void +int128_add_int64_mul_int64(INT128 *i128, int64 x, int64 y) +{ + /* INT64_AU32 must use arithmetic right shift */ + StaticAssertStmt(((int64) -1 >> 1) == (int64) -1, + "arithmetic right shift is needed"); + + /*---------- + * Form the 128-bit product x * y using 64-bit arithmetic. + * Considering each 64-bit input as having 32-bit high and low parts, + * we can compute + * + * x * y = ((x.hi << 32) + x.lo) * (((y.hi << 32) + y.lo) + * = (x.hi * y.hi) << 64 + + * (x.hi * y.lo) << 32 + + * (x.lo * y.hi) << 32 + + * x.lo * y.lo + * + * Each individual product is of 32-bit terms so it won't overflow when + * computed in 64-bit arithmetic. Then we just have to shift it to the + * correct position while adding into the 128-bit result. We must also + * keep in mind that the "lo" parts must be treated as unsigned. + *---------- + */ + + /* No need to work hard if product must be zero */ + if (x != 0 && y != 0) + { + int64 x_u32 = INT64_AU32(x); + uint64 x_l32 = INT64_AL32(x); + int64 y_u32 = INT64_AU32(y); + uint64 y_l32 = INT64_AL32(y); + int64 tmp; + + /* the first term */ + i128->hi += x_u32 * y_u32; + + /* the second term: sign-extend it only if x is negative */ + tmp = x_u32 * y_l32; + if (x < 0) + i128->hi += INT64_AU32(tmp); + else + i128->hi += ((uint64) tmp) >> 32; + int128_add_uint64(i128, ((uint64) INT64_AL32(tmp)) << 32); + + /* the third term: sign-extend it only if y is negative */ + tmp = x_l32 * y_u32; + if (y < 0) + i128->hi += INT64_AU32(tmp); + else + i128->hi += ((uint64) tmp) >> 32; + int128_add_uint64(i128, ((uint64) INT64_AL32(tmp)) << 32); + + /* the fourth term: always unsigned */ + int128_add_uint64(i128, x_l32 * y_l32); + } +} + +/* + * Compare two INT128 values, return -1, 0, or +1. + */ +static inline int +int128_compare(INT128 x, INT128 y) +{ + if (x.hi < y.hi) + return -1; + if (x.hi > y.hi) + return 1; + if (x.lo < y.lo) + return -1; + if (x.lo > y.lo) + return 1; + return 0; +} + +/* + * Widen int64 to INT128. + */ +static inline INT128 +int64_to_int128(int64 v) +{ + INT128 val; + + val.lo = (uint64) v; + val.hi = (v < 0) ? -INT64CONST(1) : INT64CONST(0); + return val; +} + +/* + * Convert INT128 to int64 (losing any high-order bits). + * This also works fine for casting down to uint64. + */ +static inline int64 +int128_to_int64(INT128 val) +{ + return (int64) val.lo; +} + +#endif /* USE_NATIVE_INT128 */ + +#endif /* INT128_H */ |