diff options
Diffstat (limited to '')
| -rw-r--r-- | src/backend/access/common/heaptuple.c | 1501 |
1 files changed, 1501 insertions, 0 deletions
diff --git a/src/backend/access/common/heaptuple.c b/src/backend/access/common/heaptuple.c new file mode 100644 index 0000000..0b56b0f --- /dev/null +++ b/src/backend/access/common/heaptuple.c @@ -0,0 +1,1501 @@ +/*------------------------------------------------------------------------- + * + * heaptuple.c + * This file contains heap tuple accessor and mutator routines, as well + * as various tuple utilities. + * + * Some notes about varlenas and this code: + * + * Before Postgres 8.3 varlenas always had a 4-byte length header, and + * therefore always needed 4-byte alignment (at least). This wasted space + * for short varlenas, for example CHAR(1) took 5 bytes and could need up to + * 3 additional padding bytes for alignment. + * + * Now, a short varlena (up to 126 data bytes) is reduced to a 1-byte header + * and we don't align it. To hide this from datatype-specific functions that + * don't want to deal with it, such a datum is considered "toasted" and will + * be expanded back to the normal 4-byte-header format by pg_detoast_datum. + * (In performance-critical code paths we can use pg_detoast_datum_packed + * and the appropriate access macros to avoid that overhead.) Note that this + * conversion is performed directly in heap_form_tuple, without invoking + * heaptoast.c. + * + * This change will break any code that assumes it needn't detoast values + * that have been put into a tuple but never sent to disk. Hopefully there + * are few such places. + * + * Varlenas still have alignment INT (or DOUBLE) in pg_type/pg_attribute, since + * that's the normal requirement for the untoasted format. But we ignore that + * for the 1-byte-header format. This means that the actual start position + * of a varlena datum may vary depending on which format it has. To determine + * what is stored, we have to require that alignment padding bytes be zero. + * (Postgres actually has always zeroed them, but now it's required!) Since + * the first byte of a 1-byte-header varlena can never be zero, we can examine + * the first byte after the previous datum to tell if it's a pad byte or the + * start of a 1-byte-header varlena. + * + * Note that while formerly we could rely on the first varlena column of a + * system catalog to be at the offset suggested by the C struct for the + * catalog, this is now risky: it's only safe if the preceding field is + * word-aligned, so that there will never be any padding. + * + * We don't pack varlenas whose attstorage is PLAIN, since the data type + * isn't expecting to have to detoast values. This is used in particular + * by oidvector and int2vector, which are used in the system catalogs + * and we'd like to still refer to them via C struct offsets. + * + * + * Portions Copyright (c) 1996-2021, PostgreSQL Global Development Group + * Portions Copyright (c) 1994, Regents of the University of California + * + * + * IDENTIFICATION + * src/backend/access/common/heaptuple.c + * + *------------------------------------------------------------------------- + */ + +#include "postgres.h" + +#include "access/heaptoast.h" +#include "access/sysattr.h" +#include "access/tupdesc_details.h" +#include "executor/tuptable.h" +#include "utils/expandeddatum.h" + + +/* Does att's datatype allow packing into the 1-byte-header varlena format? */ +#define ATT_IS_PACKABLE(att) \ + ((att)->attlen == -1 && (att)->attstorage != TYPSTORAGE_PLAIN) +/* Use this if it's already known varlena */ +#define VARLENA_ATT_IS_PACKABLE(att) \ + ((att)->attstorage != TYPSTORAGE_PLAIN) + + +/* ---------------------------------------------------------------- + * misc support routines + * ---------------------------------------------------------------- + */ + +/* + * Return the missing value of an attribute, or NULL if there isn't one. + */ +Datum +getmissingattr(TupleDesc tupleDesc, + int attnum, bool *isnull) +{ + Form_pg_attribute att; + + Assert(attnum <= tupleDesc->natts); + Assert(attnum > 0); + + att = TupleDescAttr(tupleDesc, attnum - 1); + + if (att->atthasmissing) + { + AttrMissing *attrmiss; + + Assert(tupleDesc->constr); + Assert(tupleDesc->constr->missing); + + attrmiss = tupleDesc->constr->missing + (attnum - 1); + + if (attrmiss->am_present) + { + *isnull = false; + return attrmiss->am_value; + } + } + + *isnull = true; + return PointerGetDatum(NULL); +} + +/* + * heap_compute_data_size + * Determine size of the data area of a tuple to be constructed + */ +Size +heap_compute_data_size(TupleDesc tupleDesc, + Datum *values, + bool *isnull) +{ + Size data_length = 0; + int i; + int numberOfAttributes = tupleDesc->natts; + + for (i = 0; i < numberOfAttributes; i++) + { + Datum val; + Form_pg_attribute atti; + + if (isnull[i]) + continue; + + val = values[i]; + atti = TupleDescAttr(tupleDesc, i); + + if (ATT_IS_PACKABLE(atti) && + VARATT_CAN_MAKE_SHORT(DatumGetPointer(val))) + { + /* + * we're anticipating converting to a short varlena header, so + * adjust length and don't count any alignment + */ + data_length += VARATT_CONVERTED_SHORT_SIZE(DatumGetPointer(val)); + } + else if (atti->attlen == -1 && + VARATT_IS_EXTERNAL_EXPANDED(DatumGetPointer(val))) + { + /* + * we want to flatten the expanded value so that the constructed + * tuple doesn't depend on it + */ + data_length = att_align_nominal(data_length, atti->attalign); + data_length += EOH_get_flat_size(DatumGetEOHP(val)); + } + else + { + data_length = att_align_datum(data_length, atti->attalign, + atti->attlen, val); + data_length = att_addlength_datum(data_length, atti->attlen, + val); + } + } + + return data_length; +} + +/* + * Per-attribute helper for heap_fill_tuple and other routines building tuples. + * + * Fill in either a data value or a bit in the null bitmask + */ +static inline void +fill_val(Form_pg_attribute att, + bits8 **bit, + int *bitmask, + char **dataP, + uint16 *infomask, + Datum datum, + bool isnull) +{ + Size data_length; + char *data = *dataP; + + /* + * If we're building a null bitmap, set the appropriate bit for the + * current column value here. + */ + if (bit != NULL) + { + if (*bitmask != HIGHBIT) + *bitmask <<= 1; + else + { + *bit += 1; + **bit = 0x0; + *bitmask = 1; + } + + if (isnull) + { + *infomask |= HEAP_HASNULL; + return; + } + + **bit |= *bitmask; + } + + /* + * XXX we use the att_align macros on the pointer value itself, not on an + * offset. This is a bit of a hack. + */ + if (att->attbyval) + { + /* pass-by-value */ + data = (char *) att_align_nominal(data, att->attalign); + store_att_byval(data, datum, att->attlen); + data_length = att->attlen; + } + else if (att->attlen == -1) + { + /* varlena */ + Pointer val = DatumGetPointer(datum); + + *infomask |= HEAP_HASVARWIDTH; + if (VARATT_IS_EXTERNAL(val)) + { + if (VARATT_IS_EXTERNAL_EXPANDED(val)) + { + /* + * we want to flatten the expanded value so that the + * constructed tuple doesn't depend on it + */ + ExpandedObjectHeader *eoh = DatumGetEOHP(datum); + + data = (char *) att_align_nominal(data, + att->attalign); + data_length = EOH_get_flat_size(eoh); + EOH_flatten_into(eoh, data, data_length); + } + else + { + *infomask |= HEAP_HASEXTERNAL; + /* no alignment, since it's short by definition */ + data_length = VARSIZE_EXTERNAL(val); + memcpy(data, val, data_length); + } + } + else if (VARATT_IS_SHORT(val)) + { + /* no alignment for short varlenas */ + data_length = VARSIZE_SHORT(val); + memcpy(data, val, data_length); + } + else if (VARLENA_ATT_IS_PACKABLE(att) && + VARATT_CAN_MAKE_SHORT(val)) + { + /* convert to short varlena -- no alignment */ + data_length = VARATT_CONVERTED_SHORT_SIZE(val); + SET_VARSIZE_SHORT(data, data_length); + memcpy(data + 1, VARDATA(val), data_length - 1); + } + else + { + /* full 4-byte header varlena */ + data = (char *) att_align_nominal(data, + att->attalign); + data_length = VARSIZE(val); + memcpy(data, val, data_length); + } + } + else if (att->attlen == -2) + { + /* cstring ... never needs alignment */ + *infomask |= HEAP_HASVARWIDTH; + Assert(att->attalign == TYPALIGN_CHAR); + data_length = strlen(DatumGetCString(datum)) + 1; + memcpy(data, DatumGetPointer(datum), data_length); + } + else + { + /* fixed-length pass-by-reference */ + data = (char *) att_align_nominal(data, att->attalign); + Assert(att->attlen > 0); + data_length = att->attlen; + memcpy(data, DatumGetPointer(datum), data_length); + } + + data += data_length; + *dataP = data; +} + +/* + * heap_fill_tuple + * Load data portion of a tuple from values/isnull arrays + * + * We also fill the null bitmap (if any) and set the infomask bits + * that reflect the tuple's data contents. + * + * NOTE: it is now REQUIRED that the caller have pre-zeroed the data area. + */ +void +heap_fill_tuple(TupleDesc tupleDesc, + Datum *values, bool *isnull, + char *data, Size data_size, + uint16 *infomask, bits8 *bit) +{ + bits8 *bitP; + int bitmask; + int i; + int numberOfAttributes = tupleDesc->natts; + +#ifdef USE_ASSERT_CHECKING + char *start = data; +#endif + + if (bit != NULL) + { + bitP = &bit[-1]; + bitmask = HIGHBIT; + } + else + { + /* just to keep compiler quiet */ + bitP = NULL; + bitmask = 0; + } + + *infomask &= ~(HEAP_HASNULL | HEAP_HASVARWIDTH | HEAP_HASEXTERNAL); + + for (i = 0; i < numberOfAttributes; i++) + { + Form_pg_attribute attr = TupleDescAttr(tupleDesc, i); + + fill_val(attr, + bitP ? &bitP : NULL, + &bitmask, + &data, + infomask, + values ? values[i] : PointerGetDatum(NULL), + isnull ? isnull[i] : true); + } + + Assert((data - start) == data_size); +} + + +/* ---------------------------------------------------------------- + * heap tuple interface + * ---------------------------------------------------------------- + */ + +/* ---------------- + * heap_attisnull - returns true iff tuple attribute is not present + * ---------------- + */ +bool +heap_attisnull(HeapTuple tup, int attnum, TupleDesc tupleDesc) +{ + /* + * We allow a NULL tupledesc for relations not expected to have missing + * values, such as catalog relations and indexes. + */ + Assert(!tupleDesc || attnum <= tupleDesc->natts); + if (attnum > (int) HeapTupleHeaderGetNatts(tup->t_data)) + { + if (tupleDesc && TupleDescAttr(tupleDesc, attnum - 1)->atthasmissing) + return false; + else + return true; + } + + if (attnum > 0) + { + if (HeapTupleNoNulls(tup)) + return false; + return att_isnull(attnum - 1, tup->t_data->t_bits); + } + + switch (attnum) + { + case TableOidAttributeNumber: + case SelfItemPointerAttributeNumber: + case MinTransactionIdAttributeNumber: + case MinCommandIdAttributeNumber: + case MaxTransactionIdAttributeNumber: + case MaxCommandIdAttributeNumber: + /* these are never null */ + break; + + default: + elog(ERROR, "invalid attnum: %d", attnum); + } + + return false; +} + +/* ---------------- + * nocachegetattr + * + * This only gets called from fastgetattr() macro, in cases where + * we can't use a cacheoffset and the value is not null. + * + * This caches attribute offsets in the attribute descriptor. + * + * An alternative way to speed things up would be to cache offsets + * with the tuple, but that seems more difficult unless you take + * the storage hit of actually putting those offsets into the + * tuple you send to disk. Yuck. + * + * This scheme will be slightly slower than that, but should + * perform well for queries which hit large #'s of tuples. After + * you cache the offsets once, examining all the other tuples using + * the same attribute descriptor will go much quicker. -cim 5/4/91 + * + * NOTE: if you need to change this code, see also heap_deform_tuple. + * Also see nocache_index_getattr, which is the same code for index + * tuples. + * ---------------- + */ +Datum +nocachegetattr(HeapTuple tuple, + int attnum, + TupleDesc tupleDesc) +{ + HeapTupleHeader tup = tuple->t_data; + char *tp; /* ptr to data part of tuple */ + bits8 *bp = tup->t_bits; /* ptr to null bitmap in tuple */ + bool slow = false; /* do we have to walk attrs? */ + int off; /* current offset within data */ + + /* ---------------- + * Three cases: + * + * 1: No nulls and no variable-width attributes. + * 2: Has a null or a var-width AFTER att. + * 3: Has nulls or var-widths BEFORE att. + * ---------------- + */ + + attnum--; + + if (!HeapTupleNoNulls(tuple)) + { + /* + * there's a null somewhere in the tuple + * + * check to see if any preceding bits are null... + */ + int byte = attnum >> 3; + int finalbit = attnum & 0x07; + + /* check for nulls "before" final bit of last byte */ + if ((~bp[byte]) & ((1 << finalbit) - 1)) + slow = true; + else + { + /* check for nulls in any "earlier" bytes */ + int i; + + for (i = 0; i < byte; i++) + { + if (bp[i] != 0xFF) + { + slow = true; + break; + } + } + } + } + + tp = (char *) tup + tup->t_hoff; + + if (!slow) + { + Form_pg_attribute att; + + /* + * If we get here, there are no nulls up to and including the target + * attribute. If we have a cached offset, we can use it. + */ + att = TupleDescAttr(tupleDesc, attnum); + if (att->attcacheoff >= 0) + return fetchatt(att, tp + att->attcacheoff); + + /* + * Otherwise, check for non-fixed-length attrs up to and including + * target. If there aren't any, it's safe to cheaply initialize the + * cached offsets for these attrs. + */ + if (HeapTupleHasVarWidth(tuple)) + { + int j; + + for (j = 0; j <= attnum; j++) + { + if (TupleDescAttr(tupleDesc, j)->attlen <= 0) + { + slow = true; + break; + } + } + } + } + + if (!slow) + { + int natts = tupleDesc->natts; + int j = 1; + + /* + * If we get here, we have a tuple with no nulls or var-widths up to + * and including the target attribute, so we can use the cached offset + * ... only we don't have it yet, or we'd not have got here. Since + * it's cheap to compute offsets for fixed-width columns, we take the + * opportunity to initialize the cached offsets for *all* the leading + * fixed-width columns, in hope of avoiding future visits to this + * routine. + */ + TupleDescAttr(tupleDesc, 0)->attcacheoff = 0; + + /* we might have set some offsets in the slow path previously */ + while (j < natts && TupleDescAttr(tupleDesc, j)->attcacheoff > 0) + j++; + + off = TupleDescAttr(tupleDesc, j - 1)->attcacheoff + + TupleDescAttr(tupleDesc, j - 1)->attlen; + + for (; j < natts; j++) + { + Form_pg_attribute att = TupleDescAttr(tupleDesc, j); + + if (att->attlen <= 0) + break; + + off = att_align_nominal(off, att->attalign); + + att->attcacheoff = off; + + off += att->attlen; + } + + Assert(j > attnum); + + off = TupleDescAttr(tupleDesc, attnum)->attcacheoff; + } + else + { + bool usecache = true; + int i; + + /* + * Now we know that we have to walk the tuple CAREFULLY. But we still + * might be able to cache some offsets for next time. + * + * Note - This loop is a little tricky. For each non-null attribute, + * we have to first account for alignment padding before the attr, + * then advance over the attr based on its length. Nulls have no + * storage and no alignment padding either. We can use/set + * attcacheoff until we reach either a null or a var-width attribute. + */ + off = 0; + for (i = 0;; i++) /* loop exit is at "break" */ + { + Form_pg_attribute att = TupleDescAttr(tupleDesc, i); + + if (HeapTupleHasNulls(tuple) && att_isnull(i, bp)) + { + usecache = false; + continue; /* this cannot be the target att */ + } + + /* If we know the next offset, we can skip the rest */ + if (usecache && att->attcacheoff >= 0) + off = att->attcacheoff; + else if (att->attlen == -1) + { + /* + * We can only cache the offset for a varlena attribute if the + * offset is already suitably aligned, so that there would be + * no pad bytes in any case: then the offset will be valid for + * either an aligned or unaligned value. + */ + if (usecache && + off == att_align_nominal(off, att->attalign)) + att->attcacheoff = off; + else + { + off = att_align_pointer(off, att->attalign, -1, + tp + off); + usecache = false; + } + } + else + { + /* not varlena, so safe to use att_align_nominal */ + off = att_align_nominal(off, att->attalign); + + if (usecache) + att->attcacheoff = off; + } + + if (i == attnum) + break; + + off = att_addlength_pointer(off, att->attlen, tp + off); + + if (usecache && att->attlen <= 0) + usecache = false; + } + } + + return fetchatt(TupleDescAttr(tupleDesc, attnum), tp + off); +} + +/* ---------------- + * heap_getsysattr + * + * Fetch the value of a system attribute for a tuple. + * + * This is a support routine for the heap_getattr macro. The macro + * has already determined that the attnum refers to a system attribute. + * ---------------- + */ +Datum +heap_getsysattr(HeapTuple tup, int attnum, TupleDesc tupleDesc, bool *isnull) +{ + Datum result; + + Assert(tup); + + /* Currently, no sys attribute ever reads as NULL. */ + *isnull = false; + + switch (attnum) + { + case SelfItemPointerAttributeNumber: + /* pass-by-reference datatype */ + result = PointerGetDatum(&(tup->t_self)); + break; + case MinTransactionIdAttributeNumber: + result = TransactionIdGetDatum(HeapTupleHeaderGetRawXmin(tup->t_data)); + break; + case MaxTransactionIdAttributeNumber: + result = TransactionIdGetDatum(HeapTupleHeaderGetRawXmax(tup->t_data)); + break; + case MinCommandIdAttributeNumber: + case MaxCommandIdAttributeNumber: + + /* + * cmin and cmax are now both aliases for the same field, which + * can in fact also be a combo command id. XXX perhaps we should + * return the "real" cmin or cmax if possible, that is if we are + * inside the originating transaction? + */ + result = CommandIdGetDatum(HeapTupleHeaderGetRawCommandId(tup->t_data)); + break; + case TableOidAttributeNumber: + result = ObjectIdGetDatum(tup->t_tableOid); + break; + default: + elog(ERROR, "invalid attnum: %d", attnum); + result = 0; /* keep compiler quiet */ + break; + } + return result; +} + +/* ---------------- + * heap_copytuple + * + * returns a copy of an entire tuple + * + * The HeapTuple struct, tuple header, and tuple data are all allocated + * as a single palloc() block. + * ---------------- + */ +HeapTuple +heap_copytuple(HeapTuple tuple) +{ + HeapTuple newTuple; + + if (!HeapTupleIsValid(tuple) || tuple->t_data == NULL) + return NULL; + + newTuple = (HeapTuple) palloc(HEAPTUPLESIZE + tuple->t_len); + newTuple->t_len = tuple->t_len; + newTuple->t_self = tuple->t_self; + newTuple->t_tableOid = tuple->t_tableOid; + newTuple->t_data = (HeapTupleHeader) ((char *) newTuple + HEAPTUPLESIZE); + memcpy((char *) newTuple->t_data, (char *) tuple->t_data, tuple->t_len); + return newTuple; +} + +/* ---------------- + * heap_copytuple_with_tuple + * + * copy a tuple into a caller-supplied HeapTuple management struct + * + * Note that after calling this function, the "dest" HeapTuple will not be + * allocated as a single palloc() block (unlike with heap_copytuple()). + * ---------------- + */ +void +heap_copytuple_with_tuple(HeapTuple src, HeapTuple dest) +{ + if (!HeapTupleIsValid(src) || src->t_data == NULL) + { + dest->t_data = NULL; + return; + } + + dest->t_len = src->t_len; + dest->t_self = src->t_self; + dest->t_tableOid = src->t_tableOid; + dest->t_data = (HeapTupleHeader) palloc(src->t_len); + memcpy((char *) dest->t_data, (char *) src->t_data, src->t_len); +} + +/* + * Expand a tuple which has fewer attributes than required. For each attribute + * not present in the sourceTuple, if there is a missing value that will be + * used. Otherwise the attribute will be set to NULL. + * + * The source tuple must have fewer attributes than the required number. + * + * Only one of targetHeapTuple and targetMinimalTuple may be supplied. The + * other argument must be NULL. + */ +static void +expand_tuple(HeapTuple *targetHeapTuple, + MinimalTuple *targetMinimalTuple, + HeapTuple sourceTuple, + TupleDesc tupleDesc) +{ + AttrMissing *attrmiss = NULL; + int attnum; + int firstmissingnum; + bool hasNulls = HeapTupleHasNulls(sourceTuple); + HeapTupleHeader targetTHeader; + HeapTupleHeader sourceTHeader = sourceTuple->t_data; + int sourceNatts = HeapTupleHeaderGetNatts(sourceTHeader); + int natts = tupleDesc->natts; + int sourceNullLen; + int targetNullLen; + Size sourceDataLen = sourceTuple->t_len - sourceTHeader->t_hoff; + Size targetDataLen; + Size len; + int hoff; + bits8 *nullBits = NULL; + int bitMask = 0; + char *targetData; + uint16 *infoMask; + + Assert((targetHeapTuple && !targetMinimalTuple) + || (!targetHeapTuple && targetMinimalTuple)); + + Assert(sourceNatts < natts); + + sourceNullLen = (hasNulls ? BITMAPLEN(sourceNatts) : 0); + + targetDataLen = sourceDataLen; + + if (tupleDesc->constr && + tupleDesc->constr->missing) + { + /* + * If there are missing values we want to put them into the tuple. + * Before that we have to compute the extra length for the values + * array and the variable length data. + */ + attrmiss = tupleDesc->constr->missing; + + /* + * Find the first item in attrmiss for which we don't have a value in + * the source. We can ignore all the missing entries before that. + */ + for (firstmissingnum = sourceNatts; + firstmissingnum < natts; + firstmissingnum++) + { + if (attrmiss[firstmissingnum].am_present) + break; + else + hasNulls = true; + } + + /* + * Now walk the missing attributes. If there is a missing value make + * space for it. Otherwise, it's going to be NULL. + */ + for (attnum = firstmissingnum; + attnum < natts; + attnum++) + { + if (attrmiss[attnum].am_present) + { + Form_pg_attribute att = TupleDescAttr(tupleDesc, attnum); + + targetDataLen = att_align_datum(targetDataLen, + att->attalign, + att->attlen, + attrmiss[attnum].am_value); + + targetDataLen = att_addlength_pointer(targetDataLen, + att->attlen, + attrmiss[attnum].am_value); + } + else + { + /* no missing value, so it must be null */ + hasNulls = true; + } + } + } /* end if have missing values */ + else + { + /* + * If there are no missing values at all then NULLS must be allowed, + * since some of the attributes are known to be absent. + */ + hasNulls = true; + } + + len = 0; + + if (hasNulls) + { + targetNullLen = BITMAPLEN(natts); + len += targetNullLen; + } + else + targetNullLen = 0; + + /* + * Allocate and zero the space needed. Note that the tuple body and + * HeapTupleData management structure are allocated in one chunk. + */ + if (targetHeapTuple) + { + len += offsetof(HeapTupleHeaderData, t_bits); + hoff = len = MAXALIGN(len); /* align user data safely */ + len += targetDataLen; + + *targetHeapTuple = (HeapTuple) palloc0(HEAPTUPLESIZE + len); + (*targetHeapTuple)->t_data + = targetTHeader + = (HeapTupleHeader) ((char *) *targetHeapTuple + HEAPTUPLESIZE); + (*targetHeapTuple)->t_len = len; + (*targetHeapTuple)->t_tableOid = sourceTuple->t_tableOid; + (*targetHeapTuple)->t_self = sourceTuple->t_self; + + targetTHeader->t_infomask = sourceTHeader->t_infomask; + targetTHeader->t_hoff = hoff; + HeapTupleHeaderSetNatts(targetTHeader, natts); + HeapTupleHeaderSetDatumLength(targetTHeader, len); + HeapTupleHeaderSetTypeId(targetTHeader, tupleDesc->tdtypeid); + HeapTupleHeaderSetTypMod(targetTHeader, tupleDesc->tdtypmod); + /* We also make sure that t_ctid is invalid unless explicitly set */ + ItemPointerSetInvalid(&(targetTHeader->t_ctid)); + if (targetNullLen > 0) + nullBits = (bits8 *) ((char *) (*targetHeapTuple)->t_data + + offsetof(HeapTupleHeaderData, t_bits)); + targetData = (char *) (*targetHeapTuple)->t_data + hoff; + infoMask = &(targetTHeader->t_infomask); + } + else + { + len += SizeofMinimalTupleHeader; + hoff = len = MAXALIGN(len); /* align user data safely */ + len += targetDataLen; + + *targetMinimalTuple = (MinimalTuple) palloc0(len); + (*targetMinimalTuple)->t_len = len; + (*targetMinimalTuple)->t_hoff = hoff + MINIMAL_TUPLE_OFFSET; + (*targetMinimalTuple)->t_infomask = sourceTHeader->t_infomask; + /* Same macro works for MinimalTuples */ + HeapTupleHeaderSetNatts(*targetMinimalTuple, natts); + if (targetNullLen > 0) + nullBits = (bits8 *) ((char *) *targetMinimalTuple + + offsetof(MinimalTupleData, t_bits)); + targetData = (char *) *targetMinimalTuple + hoff; + infoMask = &((*targetMinimalTuple)->t_infomask); + } + + if (targetNullLen > 0) + { + if (sourceNullLen > 0) + { + /* if bitmap pre-existed copy in - all is set */ + memcpy(nullBits, + ((char *) sourceTHeader) + + offsetof(HeapTupleHeaderData, t_bits), + sourceNullLen); + nullBits += sourceNullLen - 1; + } + else + { + sourceNullLen = BITMAPLEN(sourceNatts); + /* Set NOT NULL for all existing attributes */ + memset(nullBits, 0xff, sourceNullLen); + + nullBits += sourceNullLen - 1; + + if (sourceNatts & 0x07) + { + /* build the mask (inverted!) */ + bitMask = 0xff << (sourceNatts & 0x07); + /* Voila */ + *nullBits = ~bitMask; + } + } + + bitMask = (1 << ((sourceNatts - 1) & 0x07)); + } /* End if have null bitmap */ + + memcpy(targetData, + ((char *) sourceTuple->t_data) + sourceTHeader->t_hoff, + sourceDataLen); + + targetData += sourceDataLen; + + /* Now fill in the missing values */ + for (attnum = sourceNatts; attnum < natts; attnum++) + { + + Form_pg_attribute attr = TupleDescAttr(tupleDesc, attnum); + + if (attrmiss && attrmiss[attnum].am_present) + { + fill_val(attr, + nullBits ? &nullBits : NULL, + &bitMask, + &targetData, + infoMask, + attrmiss[attnum].am_value, + false); + } + else + { + fill_val(attr, + &nullBits, + &bitMask, + &targetData, + infoMask, + (Datum) 0, + true); + } + } /* end loop over missing attributes */ +} + +/* + * Fill in the missing values for a minimal HeapTuple + */ +MinimalTuple +minimal_expand_tuple(HeapTuple sourceTuple, TupleDesc tupleDesc) +{ + MinimalTuple minimalTuple; + + expand_tuple(NULL, &minimalTuple, sourceTuple, tupleDesc); + return minimalTuple; +} + +/* + * Fill in the missing values for an ordinary HeapTuple + */ +HeapTuple +heap_expand_tuple(HeapTuple sourceTuple, TupleDesc tupleDesc) +{ + HeapTuple heapTuple; + + expand_tuple(&heapTuple, NULL, sourceTuple, tupleDesc); + return heapTuple; +} + +/* ---------------- + * heap_copy_tuple_as_datum + * + * copy a tuple as a composite-type Datum + * ---------------- + */ +Datum +heap_copy_tuple_as_datum(HeapTuple tuple, TupleDesc tupleDesc) +{ + HeapTupleHeader td; + + /* + * If the tuple contains any external TOAST pointers, we have to inline + * those fields to meet the conventions for composite-type Datums. + */ + if (HeapTupleHasExternal(tuple)) + return toast_flatten_tuple_to_datum(tuple->t_data, + tuple->t_len, + tupleDesc); + + /* + * Fast path for easy case: just make a palloc'd copy and insert the + * correct composite-Datum header fields (since those may not be set if + * the given tuple came from disk, rather than from heap_form_tuple). + */ + td = (HeapTupleHeader) palloc(tuple->t_len); + memcpy((char *) td, (char *) tuple->t_data, tuple->t_len); + + HeapTupleHeaderSetDatumLength(td, tuple->t_len); + HeapTupleHeaderSetTypeId(td, tupleDesc->tdtypeid); + HeapTupleHeaderSetTypMod(td, tupleDesc->tdtypmod); + + return PointerGetDatum(td); +} + +/* + * heap_form_tuple + * construct a tuple from the given values[] and isnull[] arrays, + * which are of the length indicated by tupleDescriptor->natts + * + * The result is allocated in the current memory context. + */ +HeapTuple +heap_form_tuple(TupleDesc tupleDescriptor, + Datum *values, + bool *isnull) +{ + HeapTuple tuple; /* return tuple */ + HeapTupleHeader td; /* tuple data */ + Size len, + data_len; + int hoff; + bool hasnull = false; + int numberOfAttributes = tupleDescriptor->natts; + int i; + + if (numberOfAttributes > MaxTupleAttributeNumber) + ereport(ERROR, + (errcode(ERRCODE_TOO_MANY_COLUMNS), + errmsg("number of columns (%d) exceeds limit (%d)", + numberOfAttributes, MaxTupleAttributeNumber))); + + /* + * Check for nulls + */ + for (i = 0; i < numberOfAttributes; i++) + { + if (isnull[i]) + { + hasnull = true; + break; + } + } + + /* + * Determine total space needed + */ + len = offsetof(HeapTupleHeaderData, t_bits); + + if (hasnull) + len += BITMAPLEN(numberOfAttributes); + + hoff = len = MAXALIGN(len); /* align user data safely */ + + data_len = heap_compute_data_size(tupleDescriptor, values, isnull); + + len += data_len; + + /* + * Allocate and zero the space needed. Note that the tuple body and + * HeapTupleData management structure are allocated in one chunk. + */ + tuple = (HeapTuple) palloc0(HEAPTUPLESIZE + len); + tuple->t_data = td = (HeapTupleHeader) ((char *) tuple + HEAPTUPLESIZE); + + /* + * And fill in the information. Note we fill the Datum fields even though + * this tuple may never become a Datum. This lets HeapTupleHeaderGetDatum + * identify the tuple type if needed. + */ + tuple->t_len = len; + ItemPointerSetInvalid(&(tuple->t_self)); + tuple->t_tableOid = InvalidOid; + + HeapTupleHeaderSetDatumLength(td, len); + HeapTupleHeaderSetTypeId(td, tupleDescriptor->tdtypeid); + HeapTupleHeaderSetTypMod(td, tupleDescriptor->tdtypmod); + /* We also make sure that t_ctid is invalid unless explicitly set */ + ItemPointerSetInvalid(&(td->t_ctid)); + + HeapTupleHeaderSetNatts(td, numberOfAttributes); + td->t_hoff = hoff; + + heap_fill_tuple(tupleDescriptor, + values, + isnull, + (char *) td + hoff, + data_len, + &td->t_infomask, + (hasnull ? td->t_bits : NULL)); + + return tuple; +} + +/* + * heap_modify_tuple + * form a new tuple from an old tuple and a set of replacement values. + * + * The replValues, replIsnull, and doReplace arrays must be of the length + * indicated by tupleDesc->natts. The new tuple is constructed using the data + * from replValues/replIsnull at columns where doReplace is true, and using + * the data from the old tuple at columns where doReplace is false. + * + * The result is allocated in the current memory context. + */ +HeapTuple +heap_modify_tuple(HeapTuple tuple, + TupleDesc tupleDesc, + Datum *replValues, + bool *replIsnull, + bool *doReplace) +{ + int numberOfAttributes = tupleDesc->natts; + int attoff; + Datum *values; + bool *isnull; + HeapTuple newTuple; + + /* + * allocate and fill values and isnull arrays from either the tuple or the + * repl information, as appropriate. + * + * NOTE: it's debatable whether to use heap_deform_tuple() here or just + * heap_getattr() only the non-replaced columns. The latter could win if + * there are many replaced columns and few non-replaced ones. However, + * heap_deform_tuple costs only O(N) while the heap_getattr way would cost + * O(N^2) if there are many non-replaced columns, so it seems better to + * err on the side of linear cost. + */ + values = (Datum *) palloc(numberOfAttributes * sizeof(Datum)); + isnull = (bool *) palloc(numberOfAttributes * sizeof(bool)); + + heap_deform_tuple(tuple, tupleDesc, values, isnull); + + for (attoff = 0; attoff < numberOfAttributes; attoff++) + { + if (doReplace[attoff]) + { + values[attoff] = replValues[attoff]; + isnull[attoff] = replIsnull[attoff]; + } + } + + /* + * create a new tuple from the values and isnull arrays + */ + newTuple = heap_form_tuple(tupleDesc, values, isnull); + + pfree(values); + pfree(isnull); + + /* + * copy the identification info of the old tuple: t_ctid, t_self + */ + newTuple->t_data->t_ctid = tuple->t_data->t_ctid; + newTuple->t_self = tuple->t_self; + newTuple->t_tableOid = tuple->t_tableOid; + + return newTuple; +} + +/* + * heap_modify_tuple_by_cols + * form a new tuple from an old tuple and a set of replacement values. + * + * This is like heap_modify_tuple, except that instead of specifying which + * column(s) to replace by a boolean map, an array of target column numbers + * is used. This is often more convenient when a fixed number of columns + * are to be replaced. The replCols, replValues, and replIsnull arrays must + * be of length nCols. Target column numbers are indexed from 1. + * + * The result is allocated in the current memory context. + */ +HeapTuple +heap_modify_tuple_by_cols(HeapTuple tuple, + TupleDesc tupleDesc, + int nCols, + int *replCols, + Datum *replValues, + bool *replIsnull) +{ + int numberOfAttributes = tupleDesc->natts; + Datum *values; + bool *isnull; + HeapTuple newTuple; + int i; + + /* + * allocate and fill values and isnull arrays from the tuple, then replace + * selected columns from the input arrays. + */ + values = (Datum *) palloc(numberOfAttributes * sizeof(Datum)); + isnull = (bool *) palloc(numberOfAttributes * sizeof(bool)); + + heap_deform_tuple(tuple, tupleDesc, values, isnull); + + for (i = 0; i < nCols; i++) + { + int attnum = replCols[i]; + + if (attnum <= 0 || attnum > numberOfAttributes) + elog(ERROR, "invalid column number %d", attnum); + values[attnum - 1] = replValues[i]; + isnull[attnum - 1] = replIsnull[i]; + } + + /* + * create a new tuple from the values and isnull arrays + */ + newTuple = heap_form_tuple(tupleDesc, values, isnull); + + pfree(values); + pfree(isnull); + + /* + * copy the identification info of the old tuple: t_ctid, t_self + */ + newTuple->t_data->t_ctid = tuple->t_data->t_ctid; + newTuple->t_self = tuple->t_self; + newTuple->t_tableOid = tuple->t_tableOid; + + return newTuple; +} + +/* + * heap_deform_tuple + * Given a tuple, extract data into values/isnull arrays; this is + * the inverse of heap_form_tuple. + * + * Storage for the values/isnull arrays is provided by the caller; + * it should be sized according to tupleDesc->natts not + * HeapTupleHeaderGetNatts(tuple->t_data). + * + * Note that for pass-by-reference datatypes, the pointer placed + * in the Datum will point into the given tuple. + * + * When all or most of a tuple's fields need to be extracted, + * this routine will be significantly quicker than a loop around + * heap_getattr; the loop will become O(N^2) as soon as any + * noncacheable attribute offsets are involved. + */ +void +heap_deform_tuple(HeapTuple tuple, TupleDesc tupleDesc, + Datum *values, bool *isnull) +{ + HeapTupleHeader tup = tuple->t_data; + bool hasnulls = HeapTupleHasNulls(tuple); + int tdesc_natts = tupleDesc->natts; + int natts; /* number of atts to extract */ + int attnum; + char *tp; /* ptr to tuple data */ + uint32 off; /* offset in tuple data */ + bits8 *bp = tup->t_bits; /* ptr to null bitmap in tuple */ + bool slow = false; /* can we use/set attcacheoff? */ + + natts = HeapTupleHeaderGetNatts(tup); + + /* + * In inheritance situations, it is possible that the given tuple actually + * has more fields than the caller is expecting. Don't run off the end of + * the caller's arrays. + */ + natts = Min(natts, tdesc_natts); + + tp = (char *) tup + tup->t_hoff; + + off = 0; + + for (attnum = 0; attnum < natts; attnum++) + { + Form_pg_attribute thisatt = TupleDescAttr(tupleDesc, attnum); + + if (hasnulls && att_isnull(attnum, bp)) + { + values[attnum] = (Datum) 0; + isnull[attnum] = true; + slow = true; /* can't use attcacheoff anymore */ + continue; + } + + isnull[attnum] = false; + + if (!slow && thisatt->attcacheoff >= 0) + off = thisatt->attcacheoff; + else if (thisatt->attlen == -1) + { + /* + * We can only cache the offset for a varlena attribute if the + * offset is already suitably aligned, so that there would be no + * pad bytes in any case: then the offset will be valid for either + * an aligned or unaligned value. + */ + if (!slow && + off == att_align_nominal(off, thisatt->attalign)) + thisatt->attcacheoff = off; + else + { + off = att_align_pointer(off, thisatt->attalign, -1, + tp + off); + slow = true; + } + } + else + { + /* not varlena, so safe to use att_align_nominal */ + off = att_align_nominal(off, thisatt->attalign); + + if (!slow) + thisatt->attcacheoff = off; + } + + values[attnum] = fetchatt(thisatt, tp + off); + + off = att_addlength_pointer(off, thisatt->attlen, tp + off); + + if (thisatt->attlen <= 0) + slow = true; /* can't use attcacheoff anymore */ + } + + /* + * If tuple doesn't have all the atts indicated by tupleDesc, read the + * rest as nulls or missing values as appropriate. + */ + for (; attnum < tdesc_natts; attnum++) + values[attnum] = getmissingattr(tupleDesc, attnum + 1, &isnull[attnum]); +} + +/* + * heap_freetuple + */ +void +heap_freetuple(HeapTuple htup) +{ + pfree(htup); +} + + +/* + * heap_form_minimal_tuple + * construct a MinimalTuple from the given values[] and isnull[] arrays, + * which are of the length indicated by tupleDescriptor->natts + * + * This is exactly like heap_form_tuple() except that the result is a + * "minimal" tuple lacking a HeapTupleData header as well as room for system + * columns. + * + * The result is allocated in the current memory context. + */ +MinimalTuple +heap_form_minimal_tuple(TupleDesc tupleDescriptor, + Datum *values, + bool *isnull) +{ + MinimalTuple tuple; /* return tuple */ + Size len, + data_len; + int hoff; + bool hasnull = false; + int numberOfAttributes = tupleDescriptor->natts; + int i; + + if (numberOfAttributes > MaxTupleAttributeNumber) + ereport(ERROR, + (errcode(ERRCODE_TOO_MANY_COLUMNS), + errmsg("number of columns (%d) exceeds limit (%d)", + numberOfAttributes, MaxTupleAttributeNumber))); + + /* + * Check for nulls + */ + for (i = 0; i < numberOfAttributes; i++) + { + if (isnull[i]) + { + hasnull = true; + break; + } + } + + /* + * Determine total space needed + */ + len = SizeofMinimalTupleHeader; + + if (hasnull) + len += BITMAPLEN(numberOfAttributes); + + hoff = len = MAXALIGN(len); /* align user data safely */ + + data_len = heap_compute_data_size(tupleDescriptor, values, isnull); + + len += data_len; + + /* + * Allocate and zero the space needed. + */ + tuple = (MinimalTuple) palloc0(len); + + /* + * And fill in the information. + */ + tuple->t_len = len; + HeapTupleHeaderSetNatts(tuple, numberOfAttributes); + tuple->t_hoff = hoff + MINIMAL_TUPLE_OFFSET; + + heap_fill_tuple(tupleDescriptor, + values, + isnull, + (char *) tuple + hoff, + data_len, + &tuple->t_infomask, + (hasnull ? tuple->t_bits : NULL)); + + return tuple; +} + +/* + * heap_free_minimal_tuple + */ +void +heap_free_minimal_tuple(MinimalTuple mtup) +{ + pfree(mtup); +} + +/* + * heap_copy_minimal_tuple + * copy a MinimalTuple + * + * The result is allocated in the current memory context. + */ +MinimalTuple +heap_copy_minimal_tuple(MinimalTuple mtup) +{ + MinimalTuple result; + + result = (MinimalTuple) palloc(mtup->t_len); + memcpy(result, mtup, mtup->t_len); + return result; +} + +/* + * heap_tuple_from_minimal_tuple + * create a HeapTuple by copying from a MinimalTuple; + * system columns are filled with zeroes + * + * The result is allocated in the current memory context. + * The HeapTuple struct, tuple header, and tuple data are all allocated + * as a single palloc() block. + */ +HeapTuple +heap_tuple_from_minimal_tuple(MinimalTuple mtup) +{ + HeapTuple result; + uint32 len = mtup->t_len + MINIMAL_TUPLE_OFFSET; + + result = (HeapTuple) palloc(HEAPTUPLESIZE + len); + result->t_len = len; + ItemPointerSetInvalid(&(result->t_self)); + result->t_tableOid = InvalidOid; + result->t_data = (HeapTupleHeader) ((char *) result + HEAPTUPLESIZE); + memcpy((char *) result->t_data + MINIMAL_TUPLE_OFFSET, mtup, mtup->t_len); + memset(result->t_data, 0, offsetof(HeapTupleHeaderData, t_infomask2)); + return result; +} + +/* + * minimal_tuple_from_heap_tuple + * create a MinimalTuple by copying from a HeapTuple + * + * The result is allocated in the current memory context. + */ +MinimalTuple +minimal_tuple_from_heap_tuple(HeapTuple htup) +{ + MinimalTuple result; + uint32 len; + + Assert(htup->t_len > MINIMAL_TUPLE_OFFSET); + len = htup->t_len - MINIMAL_TUPLE_OFFSET; + result = (MinimalTuple) palloc(len); + memcpy(result, (char *) htup->t_data + MINIMAL_TUPLE_OFFSET, len); + result->t_len = len; + return result; +} + +/* + * This mainly exists so JIT can inline the definition, but it's also + * sometimes useful in debugging sessions. + */ +size_t +varsize_any(void *p) +{ + return VARSIZE_ANY(p); +} |