diff options
Diffstat (limited to '')
| -rw-r--r-- | src/backend/access/heap/heapam.c | 9955 |
1 files changed, 9955 insertions, 0 deletions
diff --git a/src/backend/access/heap/heapam.c b/src/backend/access/heap/heapam.c new file mode 100644 index 0000000..64b9ec0 --- /dev/null +++ b/src/backend/access/heap/heapam.c @@ -0,0 +1,9955 @@ +/*------------------------------------------------------------------------- + * + * heapam.c + * heap access method code + * + * Portions Copyright (c) 1996-2021, PostgreSQL Global Development Group + * Portions Copyright (c) 1994, Regents of the University of California + * + * + * IDENTIFICATION + * src/backend/access/heap/heapam.c + * + * + * INTERFACE ROUTINES + * heap_beginscan - begin relation scan + * heap_rescan - restart a relation scan + * heap_endscan - end relation scan + * heap_getnext - retrieve next tuple in scan + * heap_fetch - retrieve tuple with given tid + * heap_insert - insert tuple into a relation + * heap_multi_insert - insert multiple tuples into a relation + * heap_delete - delete a tuple from a relation + * heap_update - replace a tuple in a relation with another tuple + * + * NOTES + * This file contains the heap_ routines which implement + * the POSTGRES heap access method used for all POSTGRES + * relations. + * + *------------------------------------------------------------------------- + */ +#include "postgres.h" + +#include "access/bufmask.h" +#include "access/genam.h" +#include "access/heapam.h" +#include "access/heapam_xlog.h" +#include "access/heaptoast.h" +#include "access/hio.h" +#include "access/multixact.h" +#include "access/parallel.h" +#include "access/relscan.h" +#include "access/subtrans.h" +#include "access/syncscan.h" +#include "access/sysattr.h" +#include "access/tableam.h" +#include "access/transam.h" +#include "access/valid.h" +#include "access/visibilitymap.h" +#include "access/xact.h" +#include "access/xlog.h" +#include "access/xloginsert.h" +#include "access/xlogutils.h" +#include "catalog/catalog.h" +#include "miscadmin.h" +#include "pgstat.h" +#include "port/atomics.h" +#include "port/pg_bitutils.h" +#include "storage/bufmgr.h" +#include "storage/freespace.h" +#include "storage/lmgr.h" +#include "storage/predicate.h" +#include "storage/procarray.h" +#include "storage/smgr.h" +#include "storage/spin.h" +#include "storage/standby.h" +#include "utils/datum.h" +#include "utils/inval.h" +#include "utils/lsyscache.h" +#include "utils/relcache.h" +#include "utils/snapmgr.h" +#include "utils/spccache.h" + + +static HeapTuple heap_prepare_insert(Relation relation, HeapTuple tup, + TransactionId xid, CommandId cid, int options); +static XLogRecPtr log_heap_update(Relation reln, Buffer oldbuf, + Buffer newbuf, HeapTuple oldtup, + HeapTuple newtup, HeapTuple old_key_tuple, + bool all_visible_cleared, bool new_all_visible_cleared); +static Bitmapset *HeapDetermineColumnsInfo(Relation relation, + Bitmapset *interesting_cols, + Bitmapset *external_cols, + HeapTuple oldtup, HeapTuple newtup, + bool *has_external); +static bool heap_acquire_tuplock(Relation relation, ItemPointer tid, + LockTupleMode mode, LockWaitPolicy wait_policy, + bool *have_tuple_lock); +static void compute_new_xmax_infomask(TransactionId xmax, uint16 old_infomask, + uint16 old_infomask2, TransactionId add_to_xmax, + LockTupleMode mode, bool is_update, + TransactionId *result_xmax, uint16 *result_infomask, + uint16 *result_infomask2); +static TM_Result heap_lock_updated_tuple(Relation rel, HeapTuple tuple, + ItemPointer ctid, TransactionId xid, + LockTupleMode mode); +static void GetMultiXactIdHintBits(MultiXactId multi, uint16 *new_infomask, + uint16 *new_infomask2); +static TransactionId MultiXactIdGetUpdateXid(TransactionId xmax, + uint16 t_infomask); +static bool DoesMultiXactIdConflict(MultiXactId multi, uint16 infomask, + LockTupleMode lockmode, bool *current_is_member); +static void MultiXactIdWait(MultiXactId multi, MultiXactStatus status, uint16 infomask, + Relation rel, ItemPointer ctid, XLTW_Oper oper, + int *remaining); +static bool ConditionalMultiXactIdWait(MultiXactId multi, MultiXactStatus status, + uint16 infomask, Relation rel, int *remaining); +static void index_delete_sort(TM_IndexDeleteOp *delstate); +static int bottomup_sort_and_shrink(TM_IndexDeleteOp *delstate); +static XLogRecPtr log_heap_new_cid(Relation relation, HeapTuple tup); +static HeapTuple ExtractReplicaIdentity(Relation rel, HeapTuple tup, bool key_required, + bool *copy); + + +/* + * Each tuple lock mode has a corresponding heavyweight lock, and one or two + * corresponding MultiXactStatuses (one to merely lock tuples, another one to + * update them). This table (and the macros below) helps us determine the + * heavyweight lock mode and MultiXactStatus values to use for any particular + * tuple lock strength. + * + * Don't look at lockstatus/updstatus directly! Use get_mxact_status_for_lock + * instead. + */ +static const struct +{ + LOCKMODE hwlock; + int lockstatus; + int updstatus; +} + + tupleLockExtraInfo[MaxLockTupleMode + 1] = +{ + { /* LockTupleKeyShare */ + AccessShareLock, + MultiXactStatusForKeyShare, + -1 /* KeyShare does not allow updating tuples */ + }, + { /* LockTupleShare */ + RowShareLock, + MultiXactStatusForShare, + -1 /* Share does not allow updating tuples */ + }, + { /* LockTupleNoKeyExclusive */ + ExclusiveLock, + MultiXactStatusForNoKeyUpdate, + MultiXactStatusNoKeyUpdate + }, + { /* LockTupleExclusive */ + AccessExclusiveLock, + MultiXactStatusForUpdate, + MultiXactStatusUpdate + } +}; + +/* Get the LOCKMODE for a given MultiXactStatus */ +#define LOCKMODE_from_mxstatus(status) \ + (tupleLockExtraInfo[TUPLOCK_from_mxstatus((status))].hwlock) + +/* + * Acquire heavyweight locks on tuples, using a LockTupleMode strength value. + * This is more readable than having every caller translate it to lock.h's + * LOCKMODE. + */ +#define LockTupleTuplock(rel, tup, mode) \ + LockTuple((rel), (tup), tupleLockExtraInfo[mode].hwlock) +#define UnlockTupleTuplock(rel, tup, mode) \ + UnlockTuple((rel), (tup), tupleLockExtraInfo[mode].hwlock) +#define ConditionalLockTupleTuplock(rel, tup, mode) \ + ConditionalLockTuple((rel), (tup), tupleLockExtraInfo[mode].hwlock) + +#ifdef USE_PREFETCH +/* + * heap_index_delete_tuples and index_delete_prefetch_buffer use this + * structure to coordinate prefetching activity + */ +typedef struct +{ + BlockNumber cur_hblkno; + int next_item; + int ndeltids; + TM_IndexDelete *deltids; +} IndexDeletePrefetchState; +#endif + +/* heap_index_delete_tuples bottom-up index deletion costing constants */ +#define BOTTOMUP_MAX_NBLOCKS 6 +#define BOTTOMUP_TOLERANCE_NBLOCKS 3 + +/* + * heap_index_delete_tuples uses this when determining which heap blocks it + * must visit to help its bottom-up index deletion caller + */ +typedef struct IndexDeleteCounts +{ + int16 npromisingtids; /* Number of "promising" TIDs in group */ + int16 ntids; /* Number of TIDs in group */ + int16 ifirsttid; /* Offset to group's first deltid */ +} IndexDeleteCounts; + +/* + * This table maps tuple lock strength values for each particular + * MultiXactStatus value. + */ +static const int MultiXactStatusLock[MaxMultiXactStatus + 1] = +{ + LockTupleKeyShare, /* ForKeyShare */ + LockTupleShare, /* ForShare */ + LockTupleNoKeyExclusive, /* ForNoKeyUpdate */ + LockTupleExclusive, /* ForUpdate */ + LockTupleNoKeyExclusive, /* NoKeyUpdate */ + LockTupleExclusive /* Update */ +}; + +/* Get the LockTupleMode for a given MultiXactStatus */ +#define TUPLOCK_from_mxstatus(status) \ + (MultiXactStatusLock[(status)]) + +/* ---------------------------------------------------------------- + * heap support routines + * ---------------------------------------------------------------- + */ + +/* ---------------- + * initscan - scan code common to heap_beginscan and heap_rescan + * ---------------- + */ +static void +initscan(HeapScanDesc scan, ScanKey key, bool keep_startblock) +{ + ParallelBlockTableScanDesc bpscan = NULL; + bool allow_strat; + bool allow_sync; + + /* + * Determine the number of blocks we have to scan. + * + * It is sufficient to do this once at scan start, since any tuples added + * while the scan is in progress will be invisible to my snapshot anyway. + * (That is not true when using a non-MVCC snapshot. However, we couldn't + * guarantee to return tuples added after scan start anyway, since they + * might go into pages we already scanned. To guarantee consistent + * results for a non-MVCC snapshot, the caller must hold some higher-level + * lock that ensures the interesting tuple(s) won't change.) + */ + if (scan->rs_base.rs_parallel != NULL) + { + bpscan = (ParallelBlockTableScanDesc) scan->rs_base.rs_parallel; + scan->rs_nblocks = bpscan->phs_nblocks; + } + else + scan->rs_nblocks = RelationGetNumberOfBlocks(scan->rs_base.rs_rd); + + /* + * If the table is large relative to NBuffers, use a bulk-read access + * strategy and enable synchronized scanning (see syncscan.c). Although + * the thresholds for these features could be different, we make them the + * same so that there are only two behaviors to tune rather than four. + * (However, some callers need to be able to disable one or both of these + * behaviors, independently of the size of the table; also there is a GUC + * variable that can disable synchronized scanning.) + * + * Note that table_block_parallelscan_initialize has a very similar test; + * if you change this, consider changing that one, too. + */ + if (!RelationUsesLocalBuffers(scan->rs_base.rs_rd) && + scan->rs_nblocks > NBuffers / 4) + { + allow_strat = (scan->rs_base.rs_flags & SO_ALLOW_STRAT) != 0; + allow_sync = (scan->rs_base.rs_flags & SO_ALLOW_SYNC) != 0; + } + else + allow_strat = allow_sync = false; + + if (allow_strat) + { + /* During a rescan, keep the previous strategy object. */ + if (scan->rs_strategy == NULL) + scan->rs_strategy = GetAccessStrategy(BAS_BULKREAD); + } + else + { + if (scan->rs_strategy != NULL) + FreeAccessStrategy(scan->rs_strategy); + scan->rs_strategy = NULL; + } + + if (scan->rs_base.rs_parallel != NULL) + { + /* For parallel scan, believe whatever ParallelTableScanDesc says. */ + if (scan->rs_base.rs_parallel->phs_syncscan) + scan->rs_base.rs_flags |= SO_ALLOW_SYNC; + else + scan->rs_base.rs_flags &= ~SO_ALLOW_SYNC; + } + else if (keep_startblock) + { + /* + * When rescanning, we want to keep the previous startblock setting, + * so that rewinding a cursor doesn't generate surprising results. + * Reset the active syncscan setting, though. + */ + if (allow_sync && synchronize_seqscans) + scan->rs_base.rs_flags |= SO_ALLOW_SYNC; + else + scan->rs_base.rs_flags &= ~SO_ALLOW_SYNC; + } + else if (allow_sync && synchronize_seqscans) + { + scan->rs_base.rs_flags |= SO_ALLOW_SYNC; + scan->rs_startblock = ss_get_location(scan->rs_base.rs_rd, scan->rs_nblocks); + } + else + { + scan->rs_base.rs_flags &= ~SO_ALLOW_SYNC; + scan->rs_startblock = 0; + } + + scan->rs_numblocks = InvalidBlockNumber; + scan->rs_inited = false; + scan->rs_ctup.t_data = NULL; + ItemPointerSetInvalid(&scan->rs_ctup.t_self); + scan->rs_cbuf = InvalidBuffer; + scan->rs_cblock = InvalidBlockNumber; + + /* page-at-a-time fields are always invalid when not rs_inited */ + + /* + * copy the scan key, if appropriate + */ + if (key != NULL && scan->rs_base.rs_nkeys > 0) + memcpy(scan->rs_base.rs_key, key, scan->rs_base.rs_nkeys * sizeof(ScanKeyData)); + + /* + * Currently, we only have a stats counter for sequential heap scans (but + * e.g for bitmap scans the underlying bitmap index scans will be counted, + * and for sample scans we update stats for tuple fetches). + */ + if (scan->rs_base.rs_flags & SO_TYPE_SEQSCAN) + pgstat_count_heap_scan(scan->rs_base.rs_rd); +} + +/* + * heap_setscanlimits - restrict range of a heapscan + * + * startBlk is the page to start at + * numBlks is number of pages to scan (InvalidBlockNumber means "all") + */ +void +heap_setscanlimits(TableScanDesc sscan, BlockNumber startBlk, BlockNumber numBlks) +{ + HeapScanDesc scan = (HeapScanDesc) sscan; + + Assert(!scan->rs_inited); /* else too late to change */ + /* else rs_startblock is significant */ + Assert(!(scan->rs_base.rs_flags & SO_ALLOW_SYNC)); + + /* Check startBlk is valid (but allow case of zero blocks...) */ + Assert(startBlk == 0 || startBlk < scan->rs_nblocks); + + scan->rs_startblock = startBlk; + scan->rs_numblocks = numBlks; +} + +/* + * heapgetpage - subroutine for heapgettup() + * + * This routine reads and pins the specified page of the relation. + * In page-at-a-time mode it performs additional work, namely determining + * which tuples on the page are visible. + */ +void +heapgetpage(TableScanDesc sscan, BlockNumber page) +{ + HeapScanDesc scan = (HeapScanDesc) sscan; + Buffer buffer; + Snapshot snapshot; + Page dp; + int lines; + int ntup; + OffsetNumber lineoff; + ItemId lpp; + bool all_visible; + + Assert(page < scan->rs_nblocks); + + /* release previous scan buffer, if any */ + if (BufferIsValid(scan->rs_cbuf)) + { + ReleaseBuffer(scan->rs_cbuf); + scan->rs_cbuf = InvalidBuffer; + } + + /* + * Be sure to check for interrupts at least once per page. Checks at + * higher code levels won't be able to stop a seqscan that encounters many + * pages' worth of consecutive dead tuples. + */ + CHECK_FOR_INTERRUPTS(); + + /* read page using selected strategy */ + scan->rs_cbuf = ReadBufferExtended(scan->rs_base.rs_rd, MAIN_FORKNUM, page, + RBM_NORMAL, scan->rs_strategy); + scan->rs_cblock = page; + + if (!(scan->rs_base.rs_flags & SO_ALLOW_PAGEMODE)) + return; + + buffer = scan->rs_cbuf; + snapshot = scan->rs_base.rs_snapshot; + + /* + * Prune and repair fragmentation for the whole page, if possible. + */ + heap_page_prune_opt(scan->rs_base.rs_rd, buffer); + + /* + * We must hold share lock on the buffer content while examining tuple + * visibility. Afterwards, however, the tuples we have found to be + * visible are guaranteed good as long as we hold the buffer pin. + */ + LockBuffer(buffer, BUFFER_LOCK_SHARE); + + dp = BufferGetPage(buffer); + TestForOldSnapshot(snapshot, scan->rs_base.rs_rd, dp); + lines = PageGetMaxOffsetNumber(dp); + ntup = 0; + + /* + * If the all-visible flag indicates that all tuples on the page are + * visible to everyone, we can skip the per-tuple visibility tests. + * + * Note: In hot standby, a tuple that's already visible to all + * transactions on the primary might still be invisible to a read-only + * transaction in the standby. We partly handle this problem by tracking + * the minimum xmin of visible tuples as the cut-off XID while marking a + * page all-visible on the primary and WAL log that along with the + * visibility map SET operation. In hot standby, we wait for (or abort) + * all transactions that can potentially may not see one or more tuples on + * the page. That's how index-only scans work fine in hot standby. A + * crucial difference between index-only scans and heap scans is that the + * index-only scan completely relies on the visibility map where as heap + * scan looks at the page-level PD_ALL_VISIBLE flag. We are not sure if + * the page-level flag can be trusted in the same way, because it might + * get propagated somehow without being explicitly WAL-logged, e.g. via a + * full page write. Until we can prove that beyond doubt, let's check each + * tuple for visibility the hard way. + */ + all_visible = PageIsAllVisible(dp) && !snapshot->takenDuringRecovery; + + for (lineoff = FirstOffsetNumber, lpp = PageGetItemId(dp, lineoff); + lineoff <= lines; + lineoff++, lpp++) + { + if (ItemIdIsNormal(lpp)) + { + HeapTupleData loctup; + bool valid; + + loctup.t_tableOid = RelationGetRelid(scan->rs_base.rs_rd); + loctup.t_data = (HeapTupleHeader) PageGetItem((Page) dp, lpp); + loctup.t_len = ItemIdGetLength(lpp); + ItemPointerSet(&(loctup.t_self), page, lineoff); + + if (all_visible) + valid = true; + else + valid = HeapTupleSatisfiesVisibility(&loctup, snapshot, buffer); + + HeapCheckForSerializableConflictOut(valid, scan->rs_base.rs_rd, + &loctup, buffer, snapshot); + + if (valid) + scan->rs_vistuples[ntup++] = lineoff; + } + } + + LockBuffer(buffer, BUFFER_LOCK_UNLOCK); + + Assert(ntup <= MaxHeapTuplesPerPage); + scan->rs_ntuples = ntup; +} + +/* ---------------- + * heapgettup - fetch next heap tuple + * + * Initialize the scan if not already done; then advance to the next + * tuple as indicated by "dir"; return the next tuple in scan->rs_ctup, + * or set scan->rs_ctup.t_data = NULL if no more tuples. + * + * dir == NoMovementScanDirection means "re-fetch the tuple indicated + * by scan->rs_ctup". + * + * Note: the reason nkeys/key are passed separately, even though they are + * kept in the scan descriptor, is that the caller may not want us to check + * the scankeys. + * + * Note: when we fall off the end of the scan in either direction, we + * reset rs_inited. This means that a further request with the same + * scan direction will restart the scan, which is a bit odd, but a + * request with the opposite scan direction will start a fresh scan + * in the proper direction. The latter is required behavior for cursors, + * while the former case is generally undefined behavior in Postgres + * so we don't care too much. + * ---------------- + */ +static void +heapgettup(HeapScanDesc scan, + ScanDirection dir, + int nkeys, + ScanKey key) +{ + HeapTuple tuple = &(scan->rs_ctup); + Snapshot snapshot = scan->rs_base.rs_snapshot; + bool backward = ScanDirectionIsBackward(dir); + BlockNumber page; + bool finished; + Page dp; + int lines; + OffsetNumber lineoff; + int linesleft; + ItemId lpp; + + /* + * calculate next starting lineoff, given scan direction + */ + if (ScanDirectionIsForward(dir)) + { + if (!scan->rs_inited) + { + /* + * return null immediately if relation is empty + */ + if (scan->rs_nblocks == 0 || scan->rs_numblocks == 0) + { + Assert(!BufferIsValid(scan->rs_cbuf)); + tuple->t_data = NULL; + return; + } + if (scan->rs_base.rs_parallel != NULL) + { + ParallelBlockTableScanDesc pbscan = + (ParallelBlockTableScanDesc) scan->rs_base.rs_parallel; + ParallelBlockTableScanWorker pbscanwork = + scan->rs_parallelworkerdata; + + table_block_parallelscan_startblock_init(scan->rs_base.rs_rd, + pbscanwork, pbscan); + + page = table_block_parallelscan_nextpage(scan->rs_base.rs_rd, + pbscanwork, pbscan); + + /* Other processes might have already finished the scan. */ + if (page == InvalidBlockNumber) + { + Assert(!BufferIsValid(scan->rs_cbuf)); + tuple->t_data = NULL; + return; + } + } + else + page = scan->rs_startblock; /* first page */ + heapgetpage((TableScanDesc) scan, page); + lineoff = FirstOffsetNumber; /* first offnum */ + scan->rs_inited = true; + } + else + { + /* continue from previously returned page/tuple */ + page = scan->rs_cblock; /* current page */ + lineoff = /* next offnum */ + OffsetNumberNext(ItemPointerGetOffsetNumber(&(tuple->t_self))); + } + + LockBuffer(scan->rs_cbuf, BUFFER_LOCK_SHARE); + + dp = BufferGetPage(scan->rs_cbuf); + TestForOldSnapshot(snapshot, scan->rs_base.rs_rd, dp); + lines = PageGetMaxOffsetNumber(dp); + /* page and lineoff now reference the physically next tid */ + + linesleft = lines - lineoff + 1; + } + else if (backward) + { + /* backward parallel scan not supported */ + Assert(scan->rs_base.rs_parallel == NULL); + + if (!scan->rs_inited) + { + /* + * return null immediately if relation is empty + */ + if (scan->rs_nblocks == 0 || scan->rs_numblocks == 0) + { + Assert(!BufferIsValid(scan->rs_cbuf)); + tuple->t_data = NULL; + return; + } + + /* + * Disable reporting to syncscan logic in a backwards scan; it's + * not very likely anyone else is doing the same thing at the same + * time, and much more likely that we'll just bollix things for + * forward scanners. + */ + scan->rs_base.rs_flags &= ~SO_ALLOW_SYNC; + + /* + * Start from last page of the scan. Ensure we take into account + * rs_numblocks if it's been adjusted by heap_setscanlimits(). + */ + if (scan->rs_numblocks != InvalidBlockNumber) + page = (scan->rs_startblock + scan->rs_numblocks - 1) % scan->rs_nblocks; + else if (scan->rs_startblock > 0) + page = scan->rs_startblock - 1; + else + page = scan->rs_nblocks - 1; + heapgetpage((TableScanDesc) scan, page); + } + else + { + /* continue from previously returned page/tuple */ + page = scan->rs_cblock; /* current page */ + } + + LockBuffer(scan->rs_cbuf, BUFFER_LOCK_SHARE); + + dp = BufferGetPage(scan->rs_cbuf); + TestForOldSnapshot(snapshot, scan->rs_base.rs_rd, dp); + lines = PageGetMaxOffsetNumber(dp); + + if (!scan->rs_inited) + { + lineoff = lines; /* final offnum */ + scan->rs_inited = true; + } + else + { + /* + * The previous returned tuple may have been vacuumed since the + * previous scan when we use a non-MVCC snapshot, so we must + * re-establish the lineoff <= PageGetMaxOffsetNumber(dp) + * invariant + */ + lineoff = /* previous offnum */ + Min(lines, + OffsetNumberPrev(ItemPointerGetOffsetNumber(&(tuple->t_self)))); + } + /* page and lineoff now reference the physically previous tid */ + + linesleft = lineoff; + } + else + { + /* + * ``no movement'' scan direction: refetch prior tuple + */ + if (!scan->rs_inited) + { + Assert(!BufferIsValid(scan->rs_cbuf)); + tuple->t_data = NULL; + return; + } + + page = ItemPointerGetBlockNumber(&(tuple->t_self)); + if (page != scan->rs_cblock) + heapgetpage((TableScanDesc) scan, page); + + /* Since the tuple was previously fetched, needn't lock page here */ + dp = BufferGetPage(scan->rs_cbuf); + TestForOldSnapshot(snapshot, scan->rs_base.rs_rd, dp); + lineoff = ItemPointerGetOffsetNumber(&(tuple->t_self)); + lpp = PageGetItemId(dp, lineoff); + Assert(ItemIdIsNormal(lpp)); + + tuple->t_data = (HeapTupleHeader) PageGetItem((Page) dp, lpp); + tuple->t_len = ItemIdGetLength(lpp); + + return; + } + + /* + * advance the scan until we find a qualifying tuple or run out of stuff + * to scan + */ + lpp = PageGetItemId(dp, lineoff); + for (;;) + { + /* + * Only continue scanning the page while we have lines left. + * + * Note that this protects us from accessing line pointers past + * PageGetMaxOffsetNumber(); both for forward scans when we resume the + * table scan, and for when we start scanning a new page. + */ + while (linesleft > 0) + { + if (ItemIdIsNormal(lpp)) + { + bool valid; + + tuple->t_data = (HeapTupleHeader) PageGetItem((Page) dp, lpp); + tuple->t_len = ItemIdGetLength(lpp); + ItemPointerSet(&(tuple->t_self), page, lineoff); + + /* + * if current tuple qualifies, return it. + */ + valid = HeapTupleSatisfiesVisibility(tuple, + snapshot, + scan->rs_cbuf); + + HeapCheckForSerializableConflictOut(valid, scan->rs_base.rs_rd, + tuple, scan->rs_cbuf, + snapshot); + + if (valid && key != NULL) + HeapKeyTest(tuple, RelationGetDescr(scan->rs_base.rs_rd), + nkeys, key, valid); + + if (valid) + { + LockBuffer(scan->rs_cbuf, BUFFER_LOCK_UNLOCK); + return; + } + } + + /* + * otherwise move to the next item on the page + */ + --linesleft; + if (backward) + { + --lpp; /* move back in this page's ItemId array */ + --lineoff; + } + else + { + ++lpp; /* move forward in this page's ItemId array */ + ++lineoff; + } + } + + /* + * if we get here, it means we've exhausted the items on this page and + * it's time to move to the next. + */ + LockBuffer(scan->rs_cbuf, BUFFER_LOCK_UNLOCK); + + /* + * advance to next/prior page and detect end of scan + */ + if (backward) + { + finished = (page == scan->rs_startblock) || + (scan->rs_numblocks != InvalidBlockNumber ? --scan->rs_numblocks == 0 : false); + if (page == 0) + page = scan->rs_nblocks; + page--; + } + else if (scan->rs_base.rs_parallel != NULL) + { + ParallelBlockTableScanDesc pbscan = + (ParallelBlockTableScanDesc) scan->rs_base.rs_parallel; + ParallelBlockTableScanWorker pbscanwork = + scan->rs_parallelworkerdata; + + page = table_block_parallelscan_nextpage(scan->rs_base.rs_rd, + pbscanwork, pbscan); + finished = (page == InvalidBlockNumber); + } + else + { + page++; + if (page >= scan->rs_nblocks) + page = 0; + finished = (page == scan->rs_startblock) || + (scan->rs_numblocks != InvalidBlockNumber ? --scan->rs_numblocks == 0 : false); + + /* + * Report our new scan position for synchronization purposes. We + * don't do that when moving backwards, however. That would just + * mess up any other forward-moving scanners. + * + * Note: we do this before checking for end of scan so that the + * final state of the position hint is back at the start of the + * rel. That's not strictly necessary, but otherwise when you run + * the same query multiple times the starting position would shift + * a little bit backwards on every invocation, which is confusing. + * We don't guarantee any specific ordering in general, though. + */ + if (scan->rs_base.rs_flags & SO_ALLOW_SYNC) + ss_report_location(scan->rs_base.rs_rd, page); + } + + /* + * return NULL if we've exhausted all the pages + */ + if (finished) + { + if (BufferIsValid(scan->rs_cbuf)) + ReleaseBuffer(scan->rs_cbuf); + scan->rs_cbuf = InvalidBuffer; + scan->rs_cblock = InvalidBlockNumber; + tuple->t_data = NULL; + scan->rs_inited = false; + return; + } + + heapgetpage((TableScanDesc) scan, page); + + LockBuffer(scan->rs_cbuf, BUFFER_LOCK_SHARE); + + dp = BufferGetPage(scan->rs_cbuf); + TestForOldSnapshot(snapshot, scan->rs_base.rs_rd, dp); + lines = PageGetMaxOffsetNumber((Page) dp); + linesleft = lines; + if (backward) + { + lineoff = lines; + lpp = PageGetItemId(dp, lines); + } + else + { + lineoff = FirstOffsetNumber; + lpp = PageGetItemId(dp, FirstOffsetNumber); + } + } +} + +/* ---------------- + * heapgettup_pagemode - fetch next heap tuple in page-at-a-time mode + * + * Same API as heapgettup, but used in page-at-a-time mode + * + * The internal logic is much the same as heapgettup's too, but there are some + * differences: we do not take the buffer content lock (that only needs to + * happen inside heapgetpage), and we iterate through just the tuples listed + * in rs_vistuples[] rather than all tuples on the page. Notice that + * lineindex is 0-based, where the corresponding loop variable lineoff in + * heapgettup is 1-based. + * ---------------- + */ +static void +heapgettup_pagemode(HeapScanDesc scan, + ScanDirection dir, + int nkeys, + ScanKey key) +{ + HeapTuple tuple = &(scan->rs_ctup); + bool backward = ScanDirectionIsBackward(dir); + BlockNumber page; + bool finished; + Page dp; + int lines; + int lineindex; + OffsetNumber lineoff; + int linesleft; + ItemId lpp; + + /* + * calculate next starting lineindex, given scan direction + */ + if (ScanDirectionIsForward(dir)) + { + if (!scan->rs_inited) + { + /* + * return null immediately if relation is empty + */ + if (scan->rs_nblocks == 0 || scan->rs_numblocks == 0) + { + Assert(!BufferIsValid(scan->rs_cbuf)); + tuple->t_data = NULL; + return; + } + if (scan->rs_base.rs_parallel != NULL) + { + ParallelBlockTableScanDesc pbscan = + (ParallelBlockTableScanDesc) scan->rs_base.rs_parallel; + ParallelBlockTableScanWorker pbscanwork = + scan->rs_parallelworkerdata; + + table_block_parallelscan_startblock_init(scan->rs_base.rs_rd, + pbscanwork, pbscan); + + page = table_block_parallelscan_nextpage(scan->rs_base.rs_rd, + pbscanwork, pbscan); + + /* Other processes might have already finished the scan. */ + if (page == InvalidBlockNumber) + { + Assert(!BufferIsValid(scan->rs_cbuf)); + tuple->t_data = NULL; + return; + } + } + else + page = scan->rs_startblock; /* first page */ + heapgetpage((TableScanDesc) scan, page); + lineindex = 0; + scan->rs_inited = true; + } + else + { + /* continue from previously returned page/tuple */ + page = scan->rs_cblock; /* current page */ + lineindex = scan->rs_cindex + 1; + } + + dp = BufferGetPage(scan->rs_cbuf); + TestForOldSnapshot(scan->rs_base.rs_snapshot, scan->rs_base.rs_rd, dp); + lines = scan->rs_ntuples; + /* page and lineindex now reference the next visible tid */ + + linesleft = lines - lineindex; + } + else if (backward) + { + /* backward parallel scan not supported */ + Assert(scan->rs_base.rs_parallel == NULL); + + if (!scan->rs_inited) + { + /* + * return null immediately if relation is empty + */ + if (scan->rs_nblocks == 0 || scan->rs_numblocks == 0) + { + Assert(!BufferIsValid(scan->rs_cbuf)); + tuple->t_data = NULL; + return; + } + + /* + * Disable reporting to syncscan logic in a backwards scan; it's + * not very likely anyone else is doing the same thing at the same + * time, and much more likely that we'll just bollix things for + * forward scanners. + */ + scan->rs_base.rs_flags &= ~SO_ALLOW_SYNC; + + /* + * Start from last page of the scan. Ensure we take into account + * rs_numblocks if it's been adjusted by heap_setscanlimits(). + */ + if (scan->rs_numblocks != InvalidBlockNumber) + page = (scan->rs_startblock + scan->rs_numblocks - 1) % scan->rs_nblocks; + else if (scan->rs_startblock > 0) + page = scan->rs_startblock - 1; + else + page = scan->rs_nblocks - 1; + heapgetpage((TableScanDesc) scan, page); + } + else + { + /* continue from previously returned page/tuple */ + page = scan->rs_cblock; /* current page */ + } + + dp = BufferGetPage(scan->rs_cbuf); + TestForOldSnapshot(scan->rs_base.rs_snapshot, scan->rs_base.rs_rd, dp); + lines = scan->rs_ntuples; + + if (!scan->rs_inited) + { + lineindex = lines - 1; + scan->rs_inited = true; + } + else + { + lineindex = scan->rs_cindex - 1; + } + /* page and lineindex now reference the previous visible tid */ + + linesleft = lineindex + 1; + } + else + { + /* + * ``no movement'' scan direction: refetch prior tuple + */ + if (!scan->rs_inited) + { + Assert(!BufferIsValid(scan->rs_cbuf)); + tuple->t_data = NULL; + return; + } + + page = ItemPointerGetBlockNumber(&(tuple->t_self)); + if (page != scan->rs_cblock) + heapgetpage((TableScanDesc) scan, page); + + /* Since the tuple was previously fetched, needn't lock page here */ + dp = BufferGetPage(scan->rs_cbuf); + TestForOldSnapshot(scan->rs_base.rs_snapshot, scan->rs_base.rs_rd, dp); + lineoff = ItemPointerGetOffsetNumber(&(tuple->t_self)); + lpp = PageGetItemId(dp, lineoff); + Assert(ItemIdIsNormal(lpp)); + + tuple->t_data = (HeapTupleHeader) PageGetItem((Page) dp, lpp); + tuple->t_len = ItemIdGetLength(lpp); + + /* check that rs_cindex is in sync */ + Assert(scan->rs_cindex < scan->rs_ntuples); + Assert(lineoff == scan->rs_vistuples[scan->rs_cindex]); + + return; + } + + /* + * advance the scan until we find a qualifying tuple or run out of stuff + * to scan + */ + for (;;) + { + while (linesleft > 0) + { + lineoff = scan->rs_vistuples[lineindex]; + lpp = PageGetItemId(dp, lineoff); + Assert(ItemIdIsNormal(lpp)); + + tuple->t_data = (HeapTupleHeader) PageGetItem((Page) dp, lpp); + tuple->t_len = ItemIdGetLength(lpp); + ItemPointerSet(&(tuple->t_self), page, lineoff); + + /* + * if current tuple qualifies, return it. + */ + if (key != NULL) + { + bool valid; + + HeapKeyTest(tuple, RelationGetDescr(scan->rs_base.rs_rd), + nkeys, key, valid); + if (valid) + { + scan->rs_cindex = lineindex; + return; + } + } + else + { + scan->rs_cindex = lineindex; + return; + } + + /* + * otherwise move to the next item on the page + */ + --linesleft; + if (backward) + --lineindex; + else + ++lineindex; + } + + /* + * if we get here, it means we've exhausted the items on this page and + * it's time to move to the next. + */ + if (backward) + { + finished = (page == scan->rs_startblock) || + (scan->rs_numblocks != InvalidBlockNumber ? --scan->rs_numblocks == 0 : false); + if (page == 0) + page = scan->rs_nblocks; + page--; + } + else if (scan->rs_base.rs_parallel != NULL) + { + ParallelBlockTableScanDesc pbscan = + (ParallelBlockTableScanDesc) scan->rs_base.rs_parallel; + ParallelBlockTableScanWorker pbscanwork = + scan->rs_parallelworkerdata; + + page = table_block_parallelscan_nextpage(scan->rs_base.rs_rd, + pbscanwork, pbscan); + finished = (page == InvalidBlockNumber); + } + else + { + page++; + if (page >= scan->rs_nblocks) + page = 0; + finished = (page == scan->rs_startblock) || + (scan->rs_numblocks != InvalidBlockNumber ? --scan->rs_numblocks == 0 : false); + + /* + * Report our new scan position for synchronization purposes. We + * don't do that when moving backwards, however. That would just + * mess up any other forward-moving scanners. + * + * Note: we do this before checking for end of scan so that the + * final state of the position hint is back at the start of the + * rel. That's not strictly necessary, but otherwise when you run + * the same query multiple times the starting position would shift + * a little bit backwards on every invocation, which is confusing. + * We don't guarantee any specific ordering in general, though. + */ + if (scan->rs_base.rs_flags & SO_ALLOW_SYNC) + ss_report_location(scan->rs_base.rs_rd, page); + } + + /* + * return NULL if we've exhausted all the pages + */ + if (finished) + { + if (BufferIsValid(scan->rs_cbuf)) + ReleaseBuffer(scan->rs_cbuf); + scan->rs_cbuf = InvalidBuffer; + scan->rs_cblock = InvalidBlockNumber; + tuple->t_data = NULL; + scan->rs_inited = false; + return; + } + + heapgetpage((TableScanDesc) scan, page); + + dp = BufferGetPage(scan->rs_cbuf); + TestForOldSnapshot(scan->rs_base.rs_snapshot, scan->rs_base.rs_rd, dp); + lines = scan->rs_ntuples; + linesleft = lines; + if (backward) + lineindex = lines - 1; + else + lineindex = 0; + } +} + + +#if defined(DISABLE_COMPLEX_MACRO) +/* + * This is formatted so oddly so that the correspondence to the macro + * definition in access/htup_details.h is maintained. + */ +Datum +fastgetattr(HeapTuple tup, int attnum, TupleDesc tupleDesc, + bool *isnull) +{ + return ( + (attnum) > 0 ? + ( + (*(isnull) = false), + HeapTupleNoNulls(tup) ? + ( + TupleDescAttr((tupleDesc), (attnum) - 1)->attcacheoff >= 0 ? + ( + fetchatt(TupleDescAttr((tupleDesc), (attnum) - 1), + (char *) (tup)->t_data + (tup)->t_data->t_hoff + + TupleDescAttr((tupleDesc), (attnum) - 1)->attcacheoff) + ) + : + nocachegetattr((tup), (attnum), (tupleDesc)) + ) + : + ( + att_isnull((attnum) - 1, (tup)->t_data->t_bits) ? + ( + (*(isnull) = true), + (Datum) NULL + ) + : + ( + nocachegetattr((tup), (attnum), (tupleDesc)) + ) + ) + ) + : + ( + (Datum) NULL + ) + ); +} +#endif /* defined(DISABLE_COMPLEX_MACRO) */ + + +/* ---------------------------------------------------------------- + * heap access method interface + * ---------------------------------------------------------------- + */ + + +TableScanDesc +heap_beginscan(Relation relation, Snapshot snapshot, + int nkeys, ScanKey key, + ParallelTableScanDesc parallel_scan, + uint32 flags) +{ + HeapScanDesc scan; + + /* + * increment relation ref count while scanning relation + * + * This is just to make really sure the relcache entry won't go away while + * the scan has a pointer to it. Caller should be holding the rel open + * anyway, so this is redundant in all normal scenarios... + */ + RelationIncrementReferenceCount(relation); + + /* + * allocate and initialize scan descriptor + */ + scan = (HeapScanDesc) palloc(sizeof(HeapScanDescData)); + + scan->rs_base.rs_rd = relation; + scan->rs_base.rs_snapshot = snapshot; + scan->rs_base.rs_nkeys = nkeys; + scan->rs_base.rs_flags = flags; + scan->rs_base.rs_parallel = parallel_scan; + scan->rs_strategy = NULL; /* set in initscan */ + + /* + * Disable page-at-a-time mode if it's not a MVCC-safe snapshot. + */ + if (!(snapshot && IsMVCCSnapshot(snapshot))) + scan->rs_base.rs_flags &= ~SO_ALLOW_PAGEMODE; + + /* + * For seqscan and sample scans in a serializable transaction, acquire a + * predicate lock on the entire relation. This is required not only to + * lock all the matching tuples, but also to conflict with new insertions + * into the table. In an indexscan, we take page locks on the index pages + * covering the range specified in the scan qual, but in a heap scan there + * is nothing more fine-grained to lock. A bitmap scan is a different + * story, there we have already scanned the index and locked the index + * pages covering the predicate. But in that case we still have to lock + * any matching heap tuples. For sample scan we could optimize the locking + * to be at least page-level granularity, but we'd need to add per-tuple + * locking for that. + */ + if (scan->rs_base.rs_flags & (SO_TYPE_SEQSCAN | SO_TYPE_SAMPLESCAN)) + { + /* + * Ensure a missing snapshot is noticed reliably, even if the + * isolation mode means predicate locking isn't performed (and + * therefore the snapshot isn't used here). + */ + Assert(snapshot); + PredicateLockRelation(relation, snapshot); + } + + /* we only need to set this up once */ + scan->rs_ctup.t_tableOid = RelationGetRelid(relation); + + /* + * Allocate memory to keep track of page allocation for parallel workers + * when doing a parallel scan. + */ + if (parallel_scan != NULL) + scan->rs_parallelworkerdata = palloc(sizeof(ParallelBlockTableScanWorkerData)); + else + scan->rs_parallelworkerdata = NULL; + + /* + * we do this here instead of in initscan() because heap_rescan also calls + * initscan() and we don't want to allocate memory again + */ + if (nkeys > 0) + scan->rs_base.rs_key = (ScanKey) palloc(sizeof(ScanKeyData) * nkeys); + else + scan->rs_base.rs_key = NULL; + + initscan(scan, key, false); + + return (TableScanDesc) scan; +} + +void +heap_rescan(TableScanDesc sscan, ScanKey key, bool set_params, + bool allow_strat, bool allow_sync, bool allow_pagemode) +{ + HeapScanDesc scan = (HeapScanDesc) sscan; + + if (set_params) + { + if (allow_strat) + scan->rs_base.rs_flags |= SO_ALLOW_STRAT; + else + scan->rs_base.rs_flags &= ~SO_ALLOW_STRAT; + + if (allow_sync) + scan->rs_base.rs_flags |= SO_ALLOW_SYNC; + else + scan->rs_base.rs_flags &= ~SO_ALLOW_SYNC; + + if (allow_pagemode && scan->rs_base.rs_snapshot && + IsMVCCSnapshot(scan->rs_base.rs_snapshot)) + scan->rs_base.rs_flags |= SO_ALLOW_PAGEMODE; + else + scan->rs_base.rs_flags &= ~SO_ALLOW_PAGEMODE; + } + + /* + * unpin scan buffers + */ + if (BufferIsValid(scan->rs_cbuf)) + ReleaseBuffer(scan->rs_cbuf); + + /* + * reinitialize scan descriptor + */ + initscan(scan, key, true); +} + +void +heap_endscan(TableScanDesc sscan) +{ + HeapScanDesc scan = (HeapScanDesc) sscan; + + /* Note: no locking manipulations needed */ + + /* + * unpin scan buffers + */ + if (BufferIsValid(scan->rs_cbuf)) + ReleaseBuffer(scan->rs_cbuf); + + /* + * decrement relation reference count and free scan descriptor storage + */ + RelationDecrementReferenceCount(scan->rs_base.rs_rd); + + if (scan->rs_base.rs_key) + pfree(scan->rs_base.rs_key); + + if (scan->rs_strategy != NULL) + FreeAccessStrategy(scan->rs_strategy); + + if (scan->rs_parallelworkerdata != NULL) + pfree(scan->rs_parallelworkerdata); + + if (scan->rs_base.rs_flags & SO_TEMP_SNAPSHOT) + UnregisterSnapshot(scan->rs_base.rs_snapshot); + + pfree(scan); +} + +HeapTuple +heap_getnext(TableScanDesc sscan, ScanDirection direction) +{ + HeapScanDesc scan = (HeapScanDesc) sscan; + + /* + * This is still widely used directly, without going through table AM, so + * add a safety check. It's possible we should, at a later point, + * downgrade this to an assert. The reason for checking the AM routine, + * rather than the AM oid, is that this allows to write regression tests + * that create another AM reusing the heap handler. + */ + if (unlikely(sscan->rs_rd->rd_tableam != GetHeapamTableAmRoutine())) + ereport(ERROR, + (errcode(ERRCODE_FEATURE_NOT_SUPPORTED), + errmsg_internal("only heap AM is supported"))); + + /* + * We don't expect direct calls to heap_getnext with valid CheckXidAlive + * for catalog or regular tables. See detailed comments in xact.c where + * these variables are declared. Normally we have such a check at tableam + * level API but this is called from many places so we need to ensure it + * here. + */ + if (unlikely(TransactionIdIsValid(CheckXidAlive) && !bsysscan)) + elog(ERROR, "unexpected heap_getnext call during logical decoding"); + + /* Note: no locking manipulations needed */ + + if (scan->rs_base.rs_flags & SO_ALLOW_PAGEMODE) + heapgettup_pagemode(scan, direction, + scan->rs_base.rs_nkeys, scan->rs_base.rs_key); + else + heapgettup(scan, direction, + scan->rs_base.rs_nkeys, scan->rs_base.rs_key); + + if (scan->rs_ctup.t_data == NULL) + return NULL; + + /* + * if we get here it means we have a new current scan tuple, so point to + * the proper return buffer and return the tuple. + */ + + pgstat_count_heap_getnext(scan->rs_base.rs_rd); + + return &scan->rs_ctup; +} + +bool +heap_getnextslot(TableScanDesc sscan, ScanDirection direction, TupleTableSlot *slot) +{ + HeapScanDesc scan = (HeapScanDesc) sscan; + + /* Note: no locking manipulations needed */ + + if (sscan->rs_flags & SO_ALLOW_PAGEMODE) + heapgettup_pagemode(scan, direction, sscan->rs_nkeys, sscan->rs_key); + else + heapgettup(scan, direction, sscan->rs_nkeys, sscan->rs_key); + + if (scan->rs_ctup.t_data == NULL) + { + ExecClearTuple(slot); + return false; + } + + /* + * if we get here it means we have a new current scan tuple, so point to + * the proper return buffer and return the tuple. + */ + + pgstat_count_heap_getnext(scan->rs_base.rs_rd); + + ExecStoreBufferHeapTuple(&scan->rs_ctup, slot, + scan->rs_cbuf); + return true; +} + +void +heap_set_tidrange(TableScanDesc sscan, ItemPointer mintid, + ItemPointer maxtid) +{ + HeapScanDesc scan = (HeapScanDesc) sscan; + BlockNumber startBlk; + BlockNumber numBlks; + ItemPointerData highestItem; + ItemPointerData lowestItem; + + /* + * For relations without any pages, we can simply leave the TID range + * unset. There will be no tuples to scan, therefore no tuples outside + * the given TID range. + */ + if (scan->rs_nblocks == 0) + return; + + /* + * Set up some ItemPointers which point to the first and last possible + * tuples in the heap. + */ + ItemPointerSet(&highestItem, scan->rs_nblocks - 1, MaxOffsetNumber); + ItemPointerSet(&lowestItem, 0, FirstOffsetNumber); + + /* + * If the given maximum TID is below the highest possible TID in the + * relation, then restrict the range to that, otherwise we scan to the end + * of the relation. + */ + if (ItemPointerCompare(maxtid, &highestItem) < 0) + ItemPointerCopy(maxtid, &highestItem); + + /* + * If the given minimum TID is above the lowest possible TID in the + * relation, then restrict the range to only scan for TIDs above that. + */ + if (ItemPointerCompare(mintid, &lowestItem) > 0) + ItemPointerCopy(mintid, &lowestItem); + + /* + * Check for an empty range and protect from would be negative results + * from the numBlks calculation below. + */ + if (ItemPointerCompare(&highestItem, &lowestItem) < 0) + { + /* Set an empty range of blocks to scan */ + heap_setscanlimits(sscan, 0, 0); + return; + } + + /* + * Calculate the first block and the number of blocks we must scan. We + * could be more aggressive here and perform some more validation to try + * and further narrow the scope of blocks to scan by checking if the + * lowerItem has an offset above MaxOffsetNumber. In this case, we could + * advance startBlk by one. Likewise, if highestItem has an offset of 0 + * we could scan one fewer blocks. However, such an optimization does not + * seem worth troubling over, currently. + */ + startBlk = ItemPointerGetBlockNumberNoCheck(&lowestItem); + + numBlks = ItemPointerGetBlockNumberNoCheck(&highestItem) - + ItemPointerGetBlockNumberNoCheck(&lowestItem) + 1; + + /* Set the start block and number of blocks to scan */ + heap_setscanlimits(sscan, startBlk, numBlks); + + /* Finally, set the TID range in sscan */ + ItemPointerCopy(&lowestItem, &sscan->rs_mintid); + ItemPointerCopy(&highestItem, &sscan->rs_maxtid); +} + +bool +heap_getnextslot_tidrange(TableScanDesc sscan, ScanDirection direction, + TupleTableSlot *slot) +{ + HeapScanDesc scan = (HeapScanDesc) sscan; + ItemPointer mintid = &sscan->rs_mintid; + ItemPointer maxtid = &sscan->rs_maxtid; + + /* Note: no locking manipulations needed */ + for (;;) + { + if (sscan->rs_flags & SO_ALLOW_PAGEMODE) + heapgettup_pagemode(scan, direction, sscan->rs_nkeys, sscan->rs_key); + else + heapgettup(scan, direction, sscan->rs_nkeys, sscan->rs_key); + + if (scan->rs_ctup.t_data == NULL) + { + ExecClearTuple(slot); + return false; + } + + /* + * heap_set_tidrange will have used heap_setscanlimits to limit the + * range of pages we scan to only ones that can contain the TID range + * we're scanning for. Here we must filter out any tuples from these + * pages that are outwith that range. + */ + if (ItemPointerCompare(&scan->rs_ctup.t_self, mintid) < 0) + { + ExecClearTuple(slot); + + /* + * When scanning backwards, the TIDs will be in descending order. + * Future tuples in this direction will be lower still, so we can + * just return false to indicate there will be no more tuples. + */ + if (ScanDirectionIsBackward(direction)) + return false; + + continue; + } + + /* + * Likewise for the final page, we must filter out TIDs greater than + * maxtid. + */ + if (ItemPointerCompare(&scan->rs_ctup.t_self, maxtid) > 0) + { + ExecClearTuple(slot); + + /* + * When scanning forward, the TIDs will be in ascending order. + * Future tuples in this direction will be higher still, so we can + * just return false to indicate there will be no more tuples. + */ + if (ScanDirectionIsForward(direction)) + return false; + continue; + } + + break; + } + + /* + * if we get here it means we have a new current scan tuple, so point to + * the proper return buffer and return the tuple. + */ + pgstat_count_heap_getnext(scan->rs_base.rs_rd); + + ExecStoreBufferHeapTuple(&scan->rs_ctup, slot, scan->rs_cbuf); + return true; +} + +/* + * heap_fetch - retrieve tuple with given tid + * + * On entry, tuple->t_self is the TID to fetch. We pin the buffer holding + * the tuple, fill in the remaining fields of *tuple, and check the tuple + * against the specified snapshot. + * + * If successful (tuple found and passes snapshot time qual), then *userbuf + * is set to the buffer holding the tuple and true is returned. The caller + * must unpin the buffer when done with the tuple. + * + * If the tuple is not found (ie, item number references a deleted slot), + * then tuple->t_data is set to NULL, *userbuf is set to InvalidBuffer, + * and false is returned. + * + * If the tuple is found but fails the time qual check, then false is returned + * and *userbuf is set to InvalidBuffer, but tuple->t_data is left pointing + * to the tuple. (Note that it is unsafe to dereference tuple->t_data in + * this case, but callers might choose to test it for NULL-ness.) + * + * heap_fetch does not follow HOT chains: only the exact TID requested will + * be fetched. + * + * It is somewhat inconsistent that we ereport() on invalid block number but + * return false on invalid item number. There are a couple of reasons though. + * One is that the caller can relatively easily check the block number for + * validity, but cannot check the item number without reading the page + * himself. Another is that when we are following a t_ctid link, we can be + * reasonably confident that the page number is valid (since VACUUM shouldn't + * truncate off the destination page without having killed the referencing + * tuple first), but the item number might well not be good. + */ +bool +heap_fetch(Relation relation, + Snapshot snapshot, + HeapTuple tuple, + Buffer *userbuf) +{ + return heap_fetch_extended(relation, snapshot, tuple, userbuf, false); +} + +/* + * heap_fetch_extended - fetch tuple even if it fails snapshot test + * + * If keep_buf is true, then upon finding a tuple that is valid but fails + * the snapshot check, we return the tuple pointer in tuple->t_data and the + * buffer ID in *userbuf, keeping the buffer pin, just as if it had passed + * the snapshot. (The function result is still "false" though.) + * If keep_buf is false then this behaves identically to heap_fetch(). + */ +bool +heap_fetch_extended(Relation relation, + Snapshot snapshot, + HeapTuple tuple, + Buffer *userbuf, + bool keep_buf) +{ + ItemPointer tid = &(tuple->t_self); + ItemId lp; + Buffer buffer; + Page page; + OffsetNumber offnum; + bool valid; + + /* + * Fetch and pin the appropriate page of the relation. + */ + buffer = ReadBuffer(relation, ItemPointerGetBlockNumber(tid)); + + /* + * Need share lock on buffer to examine tuple commit status. + */ + LockBuffer(buffer, BUFFER_LOCK_SHARE); + page = BufferGetPage(buffer); + TestForOldSnapshot(snapshot, relation, page); + + /* + * We'd better check for out-of-range offnum in case of VACUUM since the + * TID was obtained. + */ + offnum = ItemPointerGetOffsetNumber(tid); + if (offnum < FirstOffsetNumber || offnum > PageGetMaxOffsetNumber(page)) + { + LockBuffer(buffer, BUFFER_LOCK_UNLOCK); + ReleaseBuffer(buffer); + *userbuf = InvalidBuffer; + tuple->t_data = NULL; + return false; + } + + /* + * get the item line pointer corresponding to the requested tid + */ + lp = PageGetItemId(page, offnum); + + /* + * Must check for deleted tuple. + */ + if (!ItemIdIsNormal(lp)) + { + LockBuffer(buffer, BUFFER_LOCK_UNLOCK); + ReleaseBuffer(buffer); + *userbuf = InvalidBuffer; + tuple->t_data = NULL; + return false; + } + + /* + * fill in *tuple fields + */ + tuple->t_data = (HeapTupleHeader) PageGetItem(page, lp); + tuple->t_len = ItemIdGetLength(lp); + tuple->t_tableOid = RelationGetRelid(relation); + + /* + * check tuple visibility, then release lock + */ + valid = HeapTupleSatisfiesVisibility(tuple, snapshot, buffer); + + if (valid) + PredicateLockTID(relation, &(tuple->t_self), snapshot, + HeapTupleHeaderGetXmin(tuple->t_data)); + + HeapCheckForSerializableConflictOut(valid, relation, tuple, buffer, snapshot); + + LockBuffer(buffer, BUFFER_LOCK_UNLOCK); + + if (valid) + { + /* + * All checks passed, so return the tuple as valid. Caller is now + * responsible for releasing the buffer. + */ + *userbuf = buffer; + + return true; + } + + /* Tuple failed time qual, but maybe caller wants to see it anyway. */ + if (keep_buf) + *userbuf = buffer; + else + { + ReleaseBuffer(buffer); + *userbuf = InvalidBuffer; + } + + return false; +} + +/* + * heap_hot_search_buffer - search HOT chain for tuple satisfying snapshot + * + * On entry, *tid is the TID of a tuple (either a simple tuple, or the root + * of a HOT chain), and buffer is the buffer holding this tuple. We search + * for the first chain member satisfying the given snapshot. If one is + * found, we update *tid to reference that tuple's offset number, and + * return true. If no match, return false without modifying *tid. + * + * heapTuple is a caller-supplied buffer. When a match is found, we return + * the tuple here, in addition to updating *tid. If no match is found, the + * contents of this buffer on return are undefined. + * + * If all_dead is not NULL, we check non-visible tuples to see if they are + * globally dead; *all_dead is set true if all members of the HOT chain + * are vacuumable, false if not. + * + * Unlike heap_fetch, the caller must already have pin and (at least) share + * lock on the buffer; it is still pinned/locked at exit. + */ +bool +heap_hot_search_buffer(ItemPointer tid, Relation relation, Buffer buffer, + Snapshot snapshot, HeapTuple heapTuple, + bool *all_dead, bool first_call) +{ + Page dp = (Page) BufferGetPage(buffer); + TransactionId prev_xmax = InvalidTransactionId; + BlockNumber blkno; + OffsetNumber offnum; + bool at_chain_start; + bool valid; + bool skip; + GlobalVisState *vistest = NULL; + + /* If this is not the first call, previous call returned a (live!) tuple */ + if (all_dead) + *all_dead = first_call; + + blkno = ItemPointerGetBlockNumber(tid); + offnum = ItemPointerGetOffsetNumber(tid); + at_chain_start = first_call; + skip = !first_call; + + /* XXX: we should assert that a snapshot is pushed or registered */ + Assert(TransactionIdIsValid(RecentXmin)); + Assert(BufferGetBlockNumber(buffer) == blkno); + + /* Scan through possible multiple members of HOT-chain */ + for (;;) + { + ItemId lp; + + /* check for bogus TID */ + if (offnum < FirstOffsetNumber || offnum > PageGetMaxOffsetNumber(dp)) + break; + + lp = PageGetItemId(dp, offnum); + + /* check for unused, dead, or redirected items */ + if (!ItemIdIsNormal(lp)) + { + /* We should only see a redirect at start of chain */ + if (ItemIdIsRedirected(lp) && at_chain_start) + { + /* Follow the redirect */ + offnum = ItemIdGetRedirect(lp); + at_chain_start = false; + continue; + } + /* else must be end of chain */ + break; + } + + /* + * Update heapTuple to point to the element of the HOT chain we're + * currently investigating. Having t_self set correctly is important + * because the SSI checks and the *Satisfies routine for historical + * MVCC snapshots need the correct tid to decide about the visibility. + */ + heapTuple->t_data = (HeapTupleHeader) PageGetItem(dp, lp); + heapTuple->t_len = ItemIdGetLength(lp); + heapTuple->t_tableOid = RelationGetRelid(relation); + ItemPointerSet(&heapTuple->t_self, blkno, offnum); + + /* + * Shouldn't see a HEAP_ONLY tuple at chain start. + */ + if (at_chain_start && HeapTupleIsHeapOnly(heapTuple)) + break; + + /* + * The xmin should match the previous xmax value, else chain is + * broken. + */ + if (TransactionIdIsValid(prev_xmax) && + !TransactionIdEquals(prev_xmax, + HeapTupleHeaderGetXmin(heapTuple->t_data))) + break; + + /* + * When first_call is true (and thus, skip is initially false) we'll + * return the first tuple we find. But on later passes, heapTuple + * will initially be pointing to the tuple we returned last time. + * Returning it again would be incorrect (and would loop forever), so + * we skip it and return the next match we find. + */ + if (!skip) + { + /* If it's visible per the snapshot, we must return it */ + valid = HeapTupleSatisfiesVisibility(heapTuple, snapshot, buffer); + HeapCheckForSerializableConflictOut(valid, relation, heapTuple, + buffer, snapshot); + + if (valid) + { + ItemPointerSetOffsetNumber(tid, offnum); + PredicateLockTID(relation, &heapTuple->t_self, snapshot, + HeapTupleHeaderGetXmin(heapTuple->t_data)); + if (all_dead) + *all_dead = false; + return true; + } + } + skip = false; + + /* + * If we can't see it, maybe no one else can either. At caller + * request, check whether all chain members are dead to all + * transactions. + * + * Note: if you change the criterion here for what is "dead", fix the + * planner's get_actual_variable_range() function to match. + */ + if (all_dead && *all_dead) + { + if (!vistest) + vistest = GlobalVisTestFor(relation); + + if (!HeapTupleIsSurelyDead(heapTuple, vistest)) + *all_dead = false; + } + + /* + * Check to see if HOT chain continues past this tuple; if so fetch + * the next offnum and loop around. + */ + if (HeapTupleIsHotUpdated(heapTuple)) + { + Assert(ItemPointerGetBlockNumber(&heapTuple->t_data->t_ctid) == + blkno); + offnum = ItemPointerGetOffsetNumber(&heapTuple->t_data->t_ctid); + at_chain_start = false; + prev_xmax = HeapTupleHeaderGetUpdateXid(heapTuple->t_data); + } + else + break; /* end of chain */ + } + + return false; +} + +/* + * heap_get_latest_tid - get the latest tid of a specified tuple + * + * Actually, this gets the latest version that is visible according to the + * scan's snapshot. Create a scan using SnapshotDirty to get the very latest, + * possibly uncommitted version. + * + * *tid is both an input and an output parameter: it is updated to + * show the latest version of the row. Note that it will not be changed + * if no version of the row passes the snapshot test. + */ +void +heap_get_latest_tid(TableScanDesc sscan, + ItemPointer tid) +{ + Relation relation = sscan->rs_rd; + Snapshot snapshot = sscan->rs_snapshot; + ItemPointerData ctid; + TransactionId priorXmax; + + /* + * table_tuple_get_latest_tid() verified that the passed in tid is valid. + * Assume that t_ctid links are valid however - there shouldn't be invalid + * ones in the table. + */ + Assert(ItemPointerIsValid(tid)); + + /* + * Loop to chase down t_ctid links. At top of loop, ctid is the tuple we + * need to examine, and *tid is the TID we will return if ctid turns out + * to be bogus. + * + * Note that we will loop until we reach the end of the t_ctid chain. + * Depending on the snapshot passed, there might be at most one visible + * version of the row, but we don't try to optimize for that. + */ + ctid = *tid; + priorXmax = InvalidTransactionId; /* cannot check first XMIN */ + for (;;) + { + Buffer buffer; + Page page; + OffsetNumber offnum; + ItemId lp; + HeapTupleData tp; + bool valid; + + /* + * Read, pin, and lock the page. + */ + buffer = ReadBuffer(relation, ItemPointerGetBlockNumber(&ctid)); + LockBuffer(buffer, BUFFER_LOCK_SHARE); + page = BufferGetPage(buffer); + TestForOldSnapshot(snapshot, relation, page); + + /* + * Check for bogus item number. This is not treated as an error + * condition because it can happen while following a t_ctid link. We + * just assume that the prior tid is OK and return it unchanged. + */ + offnum = ItemPointerGetOffsetNumber(&ctid); + if (offnum < FirstOffsetNumber || offnum > PageGetMaxOffsetNumber(page)) + { + UnlockReleaseBuffer(buffer); + break; + } + lp = PageGetItemId(page, offnum); + if (!ItemIdIsNormal(lp)) + { + UnlockReleaseBuffer(buffer); + break; + } + + /* OK to access the tuple */ + tp.t_self = ctid; + tp.t_data = (HeapTupleHeader) PageGetItem(page, lp); + tp.t_len = ItemIdGetLength(lp); + tp.t_tableOid = RelationGetRelid(relation); + + /* + * After following a t_ctid link, we might arrive at an unrelated + * tuple. Check for XMIN match. + */ + if (TransactionIdIsValid(priorXmax) && + !TransactionIdEquals(priorXmax, HeapTupleHeaderGetXmin(tp.t_data))) + { + UnlockReleaseBuffer(buffer); + break; + } + + /* + * Check tuple visibility; if visible, set it as the new result + * candidate. + */ + valid = HeapTupleSatisfiesVisibility(&tp, snapshot, buffer); + HeapCheckForSerializableConflictOut(valid, relation, &tp, buffer, snapshot); + if (valid) + *tid = ctid; + + /* + * If there's a valid t_ctid link, follow it, else we're done. + */ + if ((tp.t_data->t_infomask & HEAP_XMAX_INVALID) || + HeapTupleHeaderIsOnlyLocked(tp.t_data) || + HeapTupleHeaderIndicatesMovedPartitions(tp.t_data) || + ItemPointerEquals(&tp.t_self, &tp.t_data->t_ctid)) + { + UnlockReleaseBuffer(buffer); + break; + } + + ctid = tp.t_data->t_ctid; + priorXmax = HeapTupleHeaderGetUpdateXid(tp.t_data); + UnlockReleaseBuffer(buffer); + } /* end of loop */ +} + + +/* + * UpdateXmaxHintBits - update tuple hint bits after xmax transaction ends + * + * This is called after we have waited for the XMAX transaction to terminate. + * If the transaction aborted, we guarantee the XMAX_INVALID hint bit will + * be set on exit. If the transaction committed, we set the XMAX_COMMITTED + * hint bit if possible --- but beware that that may not yet be possible, + * if the transaction committed asynchronously. + * + * Note that if the transaction was a locker only, we set HEAP_XMAX_INVALID + * even if it commits. + * + * Hence callers should look only at XMAX_INVALID. + * + * Note this is not allowed for tuples whose xmax is a multixact. + */ +static void +UpdateXmaxHintBits(HeapTupleHeader tuple, Buffer buffer, TransactionId xid) +{ + Assert(TransactionIdEquals(HeapTupleHeaderGetRawXmax(tuple), xid)); + Assert(!(tuple->t_infomask & HEAP_XMAX_IS_MULTI)); + + if (!(tuple->t_infomask & (HEAP_XMAX_COMMITTED | HEAP_XMAX_INVALID))) + { + if (!HEAP_XMAX_IS_LOCKED_ONLY(tuple->t_infomask) && + TransactionIdDidCommit(xid)) + HeapTupleSetHintBits(tuple, buffer, HEAP_XMAX_COMMITTED, + xid); + else + HeapTupleSetHintBits(tuple, buffer, HEAP_XMAX_INVALID, + InvalidTransactionId); + } +} + + +/* + * GetBulkInsertState - prepare status object for a bulk insert + */ +BulkInsertState +GetBulkInsertState(void) +{ + BulkInsertState bistate; + + bistate = (BulkInsertState) palloc(sizeof(BulkInsertStateData)); + bistate->strategy = GetAccessStrategy(BAS_BULKWRITE); + bistate->current_buf = InvalidBuffer; + return bistate; +} + +/* + * FreeBulkInsertState - clean up after finishing a bulk insert + */ +void +FreeBulkInsertState(BulkInsertState bistate) +{ + if (bistate->current_buf != InvalidBuffer) + ReleaseBuffer(bistate->current_buf); + FreeAccessStrategy(bistate->strategy); + pfree(bistate); +} + +/* + * ReleaseBulkInsertStatePin - release a buffer currently held in bistate + */ +void +ReleaseBulkInsertStatePin(BulkInsertState bistate) +{ + if (bistate->current_buf != InvalidBuffer) + ReleaseBuffer(bistate->current_buf); + bistate->current_buf = InvalidBuffer; +} + + +/* + * heap_insert - insert tuple into a heap + * + * The new tuple is stamped with current transaction ID and the specified + * command ID. + * + * See table_tuple_insert for comments about most of the input flags, except + * that this routine directly takes a tuple rather than a slot. + * + * There's corresponding HEAP_INSERT_ options to all the TABLE_INSERT_ + * options, and there additionally is HEAP_INSERT_SPECULATIVE which is used to + * implement table_tuple_insert_speculative(). + * + * On return the header fields of *tup are updated to match the stored tuple; + * in particular tup->t_self receives the actual TID where the tuple was + * stored. But note that any toasting of fields within the tuple data is NOT + * reflected into *tup. + */ +void +heap_insert(Relation relation, HeapTuple tup, CommandId cid, + int options, BulkInsertState bistate) +{ + TransactionId xid = GetCurrentTransactionId(); + HeapTuple heaptup; + Buffer buffer; + Buffer vmbuffer = InvalidBuffer; + bool all_visible_cleared = false; + + /* Cheap, simplistic check that the tuple matches the rel's rowtype. */ + Assert(HeapTupleHeaderGetNatts(tup->t_data) <= + RelationGetNumberOfAttributes(relation)); + + /* + * Fill in tuple header fields and toast the tuple if necessary. + * + * Note: below this point, heaptup is the data we actually intend to store + * into the relation; tup is the caller's original untoasted data. + */ + heaptup = heap_prepare_insert(relation, tup, xid, cid, options); + + /* + * Find buffer to insert this tuple into. If the page is all visible, + * this will also pin the requisite visibility map page. + */ + buffer = RelationGetBufferForTuple(relation, heaptup->t_len, + InvalidBuffer, options, bistate, + &vmbuffer, NULL); + + /* + * We're about to do the actual insert -- but check for conflict first, to + * avoid possibly having to roll back work we've just done. + * + * This is safe without a recheck as long as there is no possibility of + * another process scanning the page between this check and the insert + * being visible to the scan (i.e., an exclusive buffer content lock is + * continuously held from this point until the tuple insert is visible). + * + * For a heap insert, we only need to check for table-level SSI locks. Our + * new tuple can't possibly conflict with existing tuple locks, and heap + * page locks are only consolidated versions of tuple locks; they do not + * lock "gaps" as index page locks do. So we don't need to specify a + * buffer when making the call, which makes for a faster check. + */ + CheckForSerializableConflictIn(relation, NULL, InvalidBlockNumber); + + /* NO EREPORT(ERROR) from here till changes are logged */ + START_CRIT_SECTION(); + + RelationPutHeapTuple(relation, buffer, heaptup, + (options & HEAP_INSERT_SPECULATIVE) != 0); + + if (PageIsAllVisible(BufferGetPage(buffer))) + { + all_visible_cleared = true; + PageClearAllVisible(BufferGetPage(buffer)); + visibilitymap_clear(relation, + ItemPointerGetBlockNumber(&(heaptup->t_self)), + vmbuffer, VISIBILITYMAP_VALID_BITS); + } + + /* + * XXX Should we set PageSetPrunable on this page ? + * + * The inserting transaction may eventually abort thus making this tuple + * DEAD and hence available for pruning. Though we don't want to optimize + * for aborts, if no other tuple in this page is UPDATEd/DELETEd, the + * aborted tuple will never be pruned until next vacuum is triggered. + * + * If you do add PageSetPrunable here, add it in heap_xlog_insert too. + */ + + MarkBufferDirty(buffer); + + /* XLOG stuff */ + if (RelationNeedsWAL(relation)) + { + xl_heap_insert xlrec; + xl_heap_header xlhdr; + XLogRecPtr recptr; + Page page = BufferGetPage(buffer); + uint8 info = XLOG_HEAP_INSERT; + int bufflags = 0; + + /* + * If this is a catalog, we need to transmit combo CIDs to properly + * decode, so log that as well. + */ + if (RelationIsAccessibleInLogicalDecoding(relation)) + log_heap_new_cid(relation, heaptup); + + /* + * If this is the single and first tuple on page, we can reinit the + * page instead of restoring the whole thing. Set flag, and hide + * buffer references from XLogInsert. + */ + if (ItemPointerGetOffsetNumber(&(heaptup->t_self)) == FirstOffsetNumber && + PageGetMaxOffsetNumber(page) == FirstOffsetNumber) + { + info |= XLOG_HEAP_INIT_PAGE; + bufflags |= REGBUF_WILL_INIT; + } + + xlrec.offnum = ItemPointerGetOffsetNumber(&heaptup->t_self); + xlrec.flags = 0; + if (all_visible_cleared) + xlrec.flags |= XLH_INSERT_ALL_VISIBLE_CLEARED; + if (options & HEAP_INSERT_SPECULATIVE) + xlrec.flags |= XLH_INSERT_IS_SPECULATIVE; + Assert(ItemPointerGetBlockNumber(&heaptup->t_self) == BufferGetBlockNumber(buffer)); + + /* + * For logical decoding, we need the tuple even if we're doing a full + * page write, so make sure it's included even if we take a full-page + * image. (XXX We could alternatively store a pointer into the FPW). + */ + if (RelationIsLogicallyLogged(relation) && + !(options & HEAP_INSERT_NO_LOGICAL)) + { + xlrec.flags |= XLH_INSERT_CONTAINS_NEW_TUPLE; + bufflags |= REGBUF_KEEP_DATA; + + if (IsToastRelation(relation)) + xlrec.flags |= XLH_INSERT_ON_TOAST_RELATION; + } + + XLogBeginInsert(); + XLogRegisterData((char *) &xlrec, SizeOfHeapInsert); + + xlhdr.t_infomask2 = heaptup->t_data->t_infomask2; + xlhdr.t_infomask = heaptup->t_data->t_infomask; + xlhdr.t_hoff = heaptup->t_data->t_hoff; + + /* + * note we mark xlhdr as belonging to buffer; if XLogInsert decides to + * write the whole page to the xlog, we don't need to store + * xl_heap_header in the xlog. + */ + XLogRegisterBuffer(0, buffer, REGBUF_STANDARD | bufflags); + XLogRegisterBufData(0, (char *) &xlhdr, SizeOfHeapHeader); + /* PG73FORMAT: write bitmap [+ padding] [+ oid] + data */ + XLogRegisterBufData(0, + (char *) heaptup->t_data + SizeofHeapTupleHeader, + heaptup->t_len - SizeofHeapTupleHeader); + + /* filtering by origin on a row level is much more efficient */ + XLogSetRecordFlags(XLOG_INCLUDE_ORIGIN); + + recptr = XLogInsert(RM_HEAP_ID, info); + + PageSetLSN(page, recptr); + } + + END_CRIT_SECTION(); + + UnlockReleaseBuffer(buffer); + if (vmbuffer != InvalidBuffer) + ReleaseBuffer(vmbuffer); + + /* + * If tuple is cachable, mark it for invalidation from the caches in case + * we abort. Note it is OK to do this after releasing the buffer, because + * the heaptup data structure is all in local memory, not in the shared + * buffer. + */ + CacheInvalidateHeapTuple(relation, heaptup, NULL); + + /* Note: speculative insertions are counted too, even if aborted later */ + pgstat_count_heap_insert(relation, 1); + + /* + * If heaptup is a private copy, release it. Don't forget to copy t_self + * back to the caller's image, too. + */ + if (heaptup != tup) + { + tup->t_self = heaptup->t_self; + heap_freetuple(heaptup); + } +} + +/* + * Subroutine for heap_insert(). Prepares a tuple for insertion. This sets the + * tuple header fields and toasts the tuple if necessary. Returns a toasted + * version of the tuple if it was toasted, or the original tuple if not. Note + * that in any case, the header fields are also set in the original tuple. + */ +static HeapTuple +heap_prepare_insert(Relation relation, HeapTuple tup, TransactionId xid, + CommandId cid, int options) +{ + /* + * To allow parallel inserts, we need to ensure that they are safe to be + * performed in workers. We have the infrastructure to allow parallel + * inserts in general except for the cases where inserts generate a new + * CommandId (eg. inserts into a table having a foreign key column). + */ + if (IsParallelWorker()) + ereport(ERROR, + (errcode(ERRCODE_INVALID_TRANSACTION_STATE), + errmsg("cannot insert tuples in a parallel worker"))); + + tup->t_data->t_infomask &= ~(HEAP_XACT_MASK); + tup->t_data->t_infomask2 &= ~(HEAP2_XACT_MASK); + tup->t_data->t_infomask |= HEAP_XMAX_INVALID; + HeapTupleHeaderSetXmin(tup->t_data, xid); + if (options & HEAP_INSERT_FROZEN) + HeapTupleHeaderSetXminFrozen(tup->t_data); + + HeapTupleHeaderSetCmin(tup->t_data, cid); + HeapTupleHeaderSetXmax(tup->t_data, 0); /* for cleanliness */ + tup->t_tableOid = RelationGetRelid(relation); + + /* + * If the new tuple is too big for storage or contains already toasted + * out-of-line attributes from some other relation, invoke the toaster. + */ + if (relation->rd_rel->relkind != RELKIND_RELATION && + relation->rd_rel->relkind != RELKIND_MATVIEW) + { + /* toast table entries should never be recursively toasted */ + Assert(!HeapTupleHasExternal(tup)); + return tup; + } + else if (HeapTupleHasExternal(tup) || tup->t_len > TOAST_TUPLE_THRESHOLD) + return heap_toast_insert_or_update(relation, tup, NULL, options); + else + return tup; +} + +/* + * heap_multi_insert - insert multiple tuples into a heap + * + * This is like heap_insert(), but inserts multiple tuples in one operation. + * That's faster than calling heap_insert() in a loop, because when multiple + * tuples can be inserted on a single page, we can write just a single WAL + * record covering all of them, and only need to lock/unlock the page once. + * + * Note: this leaks memory into the current memory context. You can create a + * temporary context before calling this, if that's a problem. + */ +void +heap_multi_insert(Relation relation, TupleTableSlot **slots, int ntuples, + CommandId cid, int options, BulkInsertState bistate) +{ + TransactionId xid = GetCurrentTransactionId(); + HeapTuple *heaptuples; + int i; + int ndone; + PGAlignedBlock scratch; + Page page; + Buffer vmbuffer = InvalidBuffer; + bool needwal; + Size saveFreeSpace; + bool need_tuple_data = RelationIsLogicallyLogged(relation); + bool need_cids = RelationIsAccessibleInLogicalDecoding(relation); + + /* currently not needed (thus unsupported) for heap_multi_insert() */ + AssertArg(!(options & HEAP_INSERT_NO_LOGICAL)); + + needwal = RelationNeedsWAL(relation); + saveFreeSpace = RelationGetTargetPageFreeSpace(relation, + HEAP_DEFAULT_FILLFACTOR); + + /* Toast and set header data in all the slots */ + heaptuples = palloc(ntuples * sizeof(HeapTuple)); + for (i = 0; i < ntuples; i++) + { + HeapTuple tuple; + + tuple = ExecFetchSlotHeapTuple(slots[i], true, NULL); + slots[i]->tts_tableOid = RelationGetRelid(relation); + tuple->t_tableOid = slots[i]->tts_tableOid; + heaptuples[i] = heap_prepare_insert(relation, tuple, xid, cid, + options); + } + + /* + * We're about to do the actual inserts -- but check for conflict first, + * to minimize the possibility of having to roll back work we've just + * done. + * + * A check here does not definitively prevent a serialization anomaly; + * that check MUST be done at least past the point of acquiring an + * exclusive buffer content lock on every buffer that will be affected, + * and MAY be done after all inserts are reflected in the buffers and + * those locks are released; otherwise there is a race condition. Since + * multiple buffers can be locked and unlocked in the loop below, and it + * would not be feasible to identify and lock all of those buffers before + * the loop, we must do a final check at the end. + * + * The check here could be omitted with no loss of correctness; it is + * present strictly as an optimization. + * + * For heap inserts, we only need to check for table-level SSI locks. Our + * new tuples can't possibly conflict with existing tuple locks, and heap + * page locks are only consolidated versions of tuple locks; they do not + * lock "gaps" as index page locks do. So we don't need to specify a + * buffer when making the call, which makes for a faster check. + */ + CheckForSerializableConflictIn(relation, NULL, InvalidBlockNumber); + + ndone = 0; + while (ndone < ntuples) + { + Buffer buffer; + bool starting_with_empty_page; + bool all_visible_cleared = false; + bool all_frozen_set = false; + int nthispage; + + CHECK_FOR_INTERRUPTS(); + + /* + * Find buffer where at least the next tuple will fit. If the page is + * all-visible, this will also pin the requisite visibility map page. + * + * Also pin visibility map page if COPY FREEZE inserts tuples into an + * empty page. See all_frozen_set below. + */ + buffer = RelationGetBufferForTuple(relation, heaptuples[ndone]->t_len, + InvalidBuffer, options, bistate, + &vmbuffer, NULL); + page = BufferGetPage(buffer); + + starting_with_empty_page = PageGetMaxOffsetNumber(page) == 0; + + if (starting_with_empty_page && (options & HEAP_INSERT_FROZEN)) + all_frozen_set = true; + + /* NO EREPORT(ERROR) from here till changes are logged */ + START_CRIT_SECTION(); + + /* + * RelationGetBufferForTuple has ensured that the first tuple fits. + * Put that on the page, and then as many other tuples as fit. + */ + RelationPutHeapTuple(relation, buffer, heaptuples[ndone], false); + + /* + * For logical decoding we need combo CIDs to properly decode the + * catalog. + */ + if (needwal && need_cids) + log_heap_new_cid(relation, heaptuples[ndone]); + + for (nthispage = 1; ndone + nthispage < ntuples; nthispage++) + { + HeapTuple heaptup = heaptuples[ndone + nthispage]; + + if (PageGetHeapFreeSpace(page) < MAXALIGN(heaptup->t_len) + saveFreeSpace) + break; + + RelationPutHeapTuple(relation, buffer, heaptup, false); + + /* + * For logical decoding we need combo CIDs to properly decode the + * catalog. + */ + if (needwal && need_cids) + log_heap_new_cid(relation, heaptup); + } + + /* + * If the page is all visible, need to clear that, unless we're only + * going to add further frozen rows to it. + * + * If we're only adding already frozen rows to a previously empty + * page, mark it as all-visible. + */ + if (PageIsAllVisible(page) && !(options & HEAP_INSERT_FROZEN)) + { + all_visible_cleared = true; + PageClearAllVisible(page); + visibilitymap_clear(relation, + BufferGetBlockNumber(buffer), + vmbuffer, VISIBILITYMAP_VALID_BITS); + } + else if (all_frozen_set) + PageSetAllVisible(page); + + /* + * XXX Should we set PageSetPrunable on this page ? See heap_insert() + */ + + MarkBufferDirty(buffer); + + /* XLOG stuff */ + if (needwal) + { + XLogRecPtr recptr; + xl_heap_multi_insert *xlrec; + uint8 info = XLOG_HEAP2_MULTI_INSERT; + char *tupledata; + int totaldatalen; + char *scratchptr = scratch.data; + bool init; + int bufflags = 0; + + /* + * If the page was previously empty, we can reinit the page + * instead of restoring the whole thing. + */ + init = starting_with_empty_page; + + /* allocate xl_heap_multi_insert struct from the scratch area */ + xlrec = (xl_heap_multi_insert *) scratchptr; + scratchptr += SizeOfHeapMultiInsert; + + /* + * Allocate offsets array. Unless we're reinitializing the page, + * in that case the tuples are stored in order starting at + * FirstOffsetNumber and we don't need to store the offsets + * explicitly. + */ + if (!init) + scratchptr += nthispage * sizeof(OffsetNumber); + + /* the rest of the scratch space is used for tuple data */ + tupledata = scratchptr; + + /* check that the mutually exclusive flags are not both set */ + Assert(!(all_visible_cleared && all_frozen_set)); + + xlrec->flags = 0; + if (all_visible_cleared) + xlrec->flags = XLH_INSERT_ALL_VISIBLE_CLEARED; + if (all_frozen_set) + xlrec->flags = XLH_INSERT_ALL_FROZEN_SET; + + xlrec->ntuples = nthispage; + + /* + * Write out an xl_multi_insert_tuple and the tuple data itself + * for each tuple. + */ + for (i = 0; i < nthispage; i++) + { + HeapTuple heaptup = heaptuples[ndone + i]; + xl_multi_insert_tuple *tuphdr; + int datalen; + + if (!init) + xlrec->offsets[i] = ItemPointerGetOffsetNumber(&heaptup->t_self); + /* xl_multi_insert_tuple needs two-byte alignment. */ + tuphdr = (xl_multi_insert_tuple *) SHORTALIGN(scratchptr); + scratchptr = ((char *) tuphdr) + SizeOfMultiInsertTuple; + + tuphdr->t_infomask2 = heaptup->t_data->t_infomask2; + tuphdr->t_infomask = heaptup->t_data->t_infomask; + tuphdr->t_hoff = heaptup->t_data->t_hoff; + + /* write bitmap [+ padding] [+ oid] + data */ + datalen = heaptup->t_len - SizeofHeapTupleHeader; + memcpy(scratchptr, + (char *) heaptup->t_data + SizeofHeapTupleHeader, + datalen); + tuphdr->datalen = datalen; + scratchptr += datalen; + } + totaldatalen = scratchptr - tupledata; + Assert((scratchptr - scratch.data) < BLCKSZ); + + if (need_tuple_data) + xlrec->flags |= XLH_INSERT_CONTAINS_NEW_TUPLE; + + /* + * Signal that this is the last xl_heap_multi_insert record + * emitted by this call to heap_multi_insert(). Needed for logical + * decoding so it knows when to cleanup temporary data. + */ + if (ndone + nthispage == ntuples) + xlrec->flags |= XLH_INSERT_LAST_IN_MULTI; + + if (init) + { + info |= XLOG_HEAP_INIT_PAGE; + bufflags |= REGBUF_WILL_INIT; + } + + /* + * If we're doing logical decoding, include the new tuple data + * even if we take a full-page image of the page. + */ + if (need_tuple_data) + bufflags |= REGBUF_KEEP_DATA; + + XLogBeginInsert(); + XLogRegisterData((char *) xlrec, tupledata - scratch.data); + XLogRegisterBuffer(0, buffer, REGBUF_STANDARD | bufflags); + + XLogRegisterBufData(0, tupledata, totaldatalen); + + /* filtering by origin on a row level is much more efficient */ + XLogSetRecordFlags(XLOG_INCLUDE_ORIGIN); + + recptr = XLogInsert(RM_HEAP2_ID, info); + + PageSetLSN(page, recptr); + } + + END_CRIT_SECTION(); + + /* + * If we've frozen everything on the page, update the visibilitymap. + * We're already holding pin on the vmbuffer. + */ + if (all_frozen_set) + { + Assert(PageIsAllVisible(page)); + Assert(visibilitymap_pin_ok(BufferGetBlockNumber(buffer), vmbuffer)); + + /* + * It's fine to use InvalidTransactionId here - this is only used + * when HEAP_INSERT_FROZEN is specified, which intentionally + * violates visibility rules. + */ + visibilitymap_set(relation, BufferGetBlockNumber(buffer), buffer, + InvalidXLogRecPtr, vmbuffer, + InvalidTransactionId, + VISIBILITYMAP_ALL_VISIBLE | VISIBILITYMAP_ALL_FROZEN); + } + + UnlockReleaseBuffer(buffer); + ndone += nthispage; + + /* + * NB: Only release vmbuffer after inserting all tuples - it's fairly + * likely that we'll insert into subsequent heap pages that are likely + * to use the same vm page. + */ + } + + /* We're done with inserting all tuples, so release the last vmbuffer. */ + if (vmbuffer != InvalidBuffer) + ReleaseBuffer(vmbuffer); + + /* + * We're done with the actual inserts. Check for conflicts again, to + * ensure that all rw-conflicts in to these inserts are detected. Without + * this final check, a sequential scan of the heap may have locked the + * table after the "before" check, missing one opportunity to detect the + * conflict, and then scanned the table before the new tuples were there, + * missing the other chance to detect the conflict. + * + * For heap inserts, we only need to check for table-level SSI locks. Our + * new tuples can't possibly conflict with existing tuple locks, and heap + * page locks are only consolidated versions of tuple locks; they do not + * lock "gaps" as index page locks do. So we don't need to specify a + * buffer when making the call. + */ + CheckForSerializableConflictIn(relation, NULL, InvalidBlockNumber); + + /* + * If tuples are cachable, mark them for invalidation from the caches in + * case we abort. Note it is OK to do this after releasing the buffer, + * because the heaptuples data structure is all in local memory, not in + * the shared buffer. + */ + if (IsCatalogRelation(relation)) + { + for (i = 0; i < ntuples; i++) + CacheInvalidateHeapTuple(relation, heaptuples[i], NULL); + } + + /* copy t_self fields back to the caller's slots */ + for (i = 0; i < ntuples; i++) + slots[i]->tts_tid = heaptuples[i]->t_self; + + pgstat_count_heap_insert(relation, ntuples); +} + +/* + * simple_heap_insert - insert a tuple + * + * Currently, this routine differs from heap_insert only in supplying + * a default command ID and not allowing access to the speedup options. + * + * This should be used rather than using heap_insert directly in most places + * where we are modifying system catalogs. + */ +void +simple_heap_insert(Relation relation, HeapTuple tup) +{ + heap_insert(relation, tup, GetCurrentCommandId(true), 0, NULL); +} + +/* + * Given infomask/infomask2, compute the bits that must be saved in the + * "infobits" field of xl_heap_delete, xl_heap_update, xl_heap_lock, + * xl_heap_lock_updated WAL records. + * + * See fix_infomask_from_infobits. + */ +static uint8 +compute_infobits(uint16 infomask, uint16 infomask2) +{ + return + ((infomask & HEAP_XMAX_IS_MULTI) != 0 ? XLHL_XMAX_IS_MULTI : 0) | + ((infomask & HEAP_XMAX_LOCK_ONLY) != 0 ? XLHL_XMAX_LOCK_ONLY : 0) | + ((infomask & HEAP_XMAX_EXCL_LOCK) != 0 ? XLHL_XMAX_EXCL_LOCK : 0) | + /* note we ignore HEAP_XMAX_SHR_LOCK here */ + ((infomask & HEAP_XMAX_KEYSHR_LOCK) != 0 ? XLHL_XMAX_KEYSHR_LOCK : 0) | + ((infomask2 & HEAP_KEYS_UPDATED) != 0 ? + XLHL_KEYS_UPDATED : 0); +} + +/* + * Given two versions of the same t_infomask for a tuple, compare them and + * return whether the relevant status for a tuple Xmax has changed. This is + * used after a buffer lock has been released and reacquired: we want to ensure + * that the tuple state continues to be the same it was when we previously + * examined it. + * + * Note the Xmax field itself must be compared separately. + */ +static inline bool +xmax_infomask_changed(uint16 new_infomask, uint16 old_infomask) +{ + const uint16 interesting = + HEAP_XMAX_IS_MULTI | HEAP_XMAX_LOCK_ONLY | HEAP_LOCK_MASK; + + if ((new_infomask & interesting) != (old_infomask & interesting)) + return true; + + return false; +} + +/* + * heap_delete - delete a tuple + * + * See table_tuple_delete() for an explanation of the parameters, except that + * this routine directly takes a tuple rather than a slot. + * + * In the failure cases, the routine fills *tmfd with the tuple's t_ctid, + * t_xmax (resolving a possible MultiXact, if necessary), and t_cmax (the last + * only for TM_SelfModified, since we cannot obtain cmax from a combo CID + * generated by another transaction). + */ +TM_Result +heap_delete(Relation relation, ItemPointer tid, + CommandId cid, Snapshot crosscheck, bool wait, + TM_FailureData *tmfd, bool changingPart) +{ + TM_Result result; + TransactionId xid = GetCurrentTransactionId(); + ItemId lp; + HeapTupleData tp; + Page page; + BlockNumber block; + Buffer buffer; + Buffer vmbuffer = InvalidBuffer; + TransactionId new_xmax; + uint16 new_infomask, + new_infomask2; + bool have_tuple_lock = false; + bool iscombo; + bool all_visible_cleared = false; + HeapTuple old_key_tuple = NULL; /* replica identity of the tuple */ + bool old_key_copied = false; + + Assert(ItemPointerIsValid(tid)); + + /* + * Forbid this during a parallel operation, lest it allocate a combo CID. + * Other workers might need that combo CID for visibility checks, and we + * have no provision for broadcasting it to them. + */ + if (IsInParallelMode()) + ereport(ERROR, + (errcode(ERRCODE_INVALID_TRANSACTION_STATE), + errmsg("cannot delete tuples during a parallel operation"))); + + block = ItemPointerGetBlockNumber(tid); + buffer = ReadBuffer(relation, block); + page = BufferGetPage(buffer); + + /* + * Before locking the buffer, pin the visibility map page if it appears to + * be necessary. Since we haven't got the lock yet, someone else might be + * in the middle of changing this, so we'll need to recheck after we have + * the lock. + */ + if (PageIsAllVisible(page)) + visibilitymap_pin(relation, block, &vmbuffer); + + LockBuffer(buffer, BUFFER_LOCK_EXCLUSIVE); + + /* + * If we didn't pin the visibility map page and the page has become all + * visible while we were busy locking the buffer, we'll have to unlock and + * re-lock, to avoid holding the buffer lock across an I/O. That's a bit + * unfortunate, but hopefully shouldn't happen often. + */ + if (vmbuffer == InvalidBuffer && PageIsAllVisible(page)) + { + LockBuffer(buffer, BUFFER_LOCK_UNLOCK); + visibilitymap_pin(relation, block, &vmbuffer); + LockBuffer(buffer, BUFFER_LOCK_EXCLUSIVE); + } + + lp = PageGetItemId(page, ItemPointerGetOffsetNumber(tid)); + Assert(ItemIdIsNormal(lp)); + + tp.t_tableOid = RelationGetRelid(relation); + tp.t_data = (HeapTupleHeader) PageGetItem(page, lp); + tp.t_len = ItemIdGetLength(lp); + tp.t_self = *tid; + +l1: + result = HeapTupleSatisfiesUpdate(&tp, cid, buffer); + + if (result == TM_Invisible) + { + UnlockReleaseBuffer(buffer); + ereport(ERROR, + (errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE), + errmsg("attempted to delete invisible tuple"))); + } + else if (result == TM_BeingModified && wait) + { + TransactionId xwait; + uint16 infomask; + + /* must copy state data before unlocking buffer */ + xwait = HeapTupleHeaderGetRawXmax(tp.t_data); + infomask = tp.t_data->t_infomask; + + /* + * Sleep until concurrent transaction ends -- except when there's a + * single locker and it's our own transaction. Note we don't care + * which lock mode the locker has, because we need the strongest one. + * + * Before sleeping, we need to acquire tuple lock to establish our + * priority for the tuple (see heap_lock_tuple). LockTuple will + * release us when we are next-in-line for the tuple. + * + * If we are forced to "start over" below, we keep the tuple lock; + * this arranges that we stay at the head of the line while rechecking + * tuple state. + */ + if (infomask & HEAP_XMAX_IS_MULTI) + { + bool current_is_member = false; + + if (DoesMultiXactIdConflict((MultiXactId) xwait, infomask, + LockTupleExclusive, ¤t_is_member)) + { + LockBuffer(buffer, BUFFER_LOCK_UNLOCK); + + /* + * Acquire the lock, if necessary (but skip it when we're + * requesting a lock and already have one; avoids deadlock). + */ + if (!current_is_member) + heap_acquire_tuplock(relation, &(tp.t_self), LockTupleExclusive, + LockWaitBlock, &have_tuple_lock); + + /* wait for multixact */ + MultiXactIdWait((MultiXactId) xwait, MultiXactStatusUpdate, infomask, + relation, &(tp.t_self), XLTW_Delete, + NULL); + LockBuffer(buffer, BUFFER_LOCK_EXCLUSIVE); + + /* + * If xwait had just locked the tuple then some other xact + * could update this tuple before we get to this point. Check + * for xmax change, and start over if so. + */ + if (xmax_infomask_changed(tp.t_data->t_infomask, infomask) || + !TransactionIdEquals(HeapTupleHeaderGetRawXmax(tp.t_data), + xwait)) + goto l1; + } + + /* + * You might think the multixact is necessarily done here, but not + * so: it could have surviving members, namely our own xact or + * other subxacts of this backend. It is legal for us to delete + * the tuple in either case, however (the latter case is + * essentially a situation of upgrading our former shared lock to + * exclusive). We don't bother changing the on-disk hint bits + * since we are about to overwrite the xmax altogether. + */ + } + else if (!TransactionIdIsCurrentTransactionId(xwait)) + { + /* + * Wait for regular transaction to end; but first, acquire tuple + * lock. + */ + LockBuffer(buffer, BUFFER_LOCK_UNLOCK); + heap_acquire_tuplock(relation, &(tp.t_self), LockTupleExclusive, + LockWaitBlock, &have_tuple_lock); + XactLockTableWait(xwait, relation, &(tp.t_self), XLTW_Delete); + LockBuffer(buffer, BUFFER_LOCK_EXCLUSIVE); + + /* + * xwait is done, but if xwait had just locked the tuple then some + * other xact could update this tuple before we get to this point. + * Check for xmax change, and start over if so. + */ + if (xmax_infomask_changed(tp.t_data->t_infomask, infomask) || + !TransactionIdEquals(HeapTupleHeaderGetRawXmax(tp.t_data), + xwait)) + goto l1; + + /* Otherwise check if it committed or aborted */ + UpdateXmaxHintBits(tp.t_data, buffer, xwait); + } + + /* + * We may overwrite if previous xmax aborted, or if it committed but + * only locked the tuple without updating it. + */ + if ((tp.t_data->t_infomask & HEAP_XMAX_INVALID) || + HEAP_XMAX_IS_LOCKED_ONLY(tp.t_data->t_infomask) || + HeapTupleHeaderIsOnlyLocked(tp.t_data)) + result = TM_Ok; + else if (!ItemPointerEquals(&tp.t_self, &tp.t_data->t_ctid)) + result = TM_Updated; + else + result = TM_Deleted; + } + + if (crosscheck != InvalidSnapshot && result == TM_Ok) + { + /* Perform additional check for transaction-snapshot mode RI updates */ + if (!HeapTupleSatisfiesVisibility(&tp, crosscheck, buffer)) + result = TM_Updated; + } + + if (result != TM_Ok) + { + Assert(result == TM_SelfModified || + result == TM_Updated || + result == TM_Deleted || + result == TM_BeingModified); + Assert(!(tp.t_data->t_infomask & HEAP_XMAX_INVALID)); + Assert(result != TM_Updated || + !ItemPointerEquals(&tp.t_self, &tp.t_data->t_ctid)); + tmfd->ctid = tp.t_data->t_ctid; + tmfd->xmax = HeapTupleHeaderGetUpdateXid(tp.t_data); + if (result == TM_SelfModified) + tmfd->cmax = HeapTupleHeaderGetCmax(tp.t_data); + else + tmfd->cmax = InvalidCommandId; + UnlockReleaseBuffer(buffer); + if (have_tuple_lock) + UnlockTupleTuplock(relation, &(tp.t_self), LockTupleExclusive); + if (vmbuffer != InvalidBuffer) + ReleaseBuffer(vmbuffer); + return result; + } + + /* + * We're about to do the actual delete -- check for conflict first, to + * avoid possibly having to roll back work we've just done. + * + * This is safe without a recheck as long as there is no possibility of + * another process scanning the page between this check and the delete + * being visible to the scan (i.e., an exclusive buffer content lock is + * continuously held from this point until the tuple delete is visible). + */ + CheckForSerializableConflictIn(relation, tid, BufferGetBlockNumber(buffer)); + + /* replace cid with a combo CID if necessary */ + HeapTupleHeaderAdjustCmax(tp.t_data, &cid, &iscombo); + + /* + * Compute replica identity tuple before entering the critical section so + * we don't PANIC upon a memory allocation failure. + */ + old_key_tuple = ExtractReplicaIdentity(relation, &tp, true, &old_key_copied); + + /* + * If this is the first possibly-multixact-able operation in the current + * transaction, set my per-backend OldestMemberMXactId setting. We can be + * certain that the transaction will never become a member of any older + * MultiXactIds than that. (We have to do this even if we end up just + * using our own TransactionId below, since some other backend could + * incorporate our XID into a MultiXact immediately afterwards.) + */ + MultiXactIdSetOldestMember(); + + compute_new_xmax_infomask(HeapTupleHeaderGetRawXmax(tp.t_data), + tp.t_data->t_infomask, tp.t_data->t_infomask2, + xid, LockTupleExclusive, true, + &new_xmax, &new_infomask, &new_infomask2); + + START_CRIT_SECTION(); + + /* + * If this transaction commits, the tuple will become DEAD sooner or + * later. Set flag that this page is a candidate for pruning once our xid + * falls below the OldestXmin horizon. If the transaction finally aborts, + * the subsequent page pruning will be a no-op and the hint will be + * cleared. + */ + PageSetPrunable(page, xid); + + if (PageIsAllVisible(page)) + { + all_visible_cleared = true; + PageClearAllVisible(page); + visibilitymap_clear(relation, BufferGetBlockNumber(buffer), + vmbuffer, VISIBILITYMAP_VALID_BITS); + } + + /* store transaction information of xact deleting the tuple */ + tp.t_data->t_infomask &= ~(HEAP_XMAX_BITS | HEAP_MOVED); + tp.t_data->t_infomask2 &= ~HEAP_KEYS_UPDATED; + tp.t_data->t_infomask |= new_infomask; + tp.t_data->t_infomask2 |= new_infomask2; + HeapTupleHeaderClearHotUpdated(tp.t_data); + HeapTupleHeaderSetXmax(tp.t_data, new_xmax); + HeapTupleHeaderSetCmax(tp.t_data, cid, iscombo); + /* Make sure there is no forward chain link in t_ctid */ + tp.t_data->t_ctid = tp.t_self; + + /* Signal that this is actually a move into another partition */ + if (changingPart) + HeapTupleHeaderSetMovedPartitions(tp.t_data); + + MarkBufferDirty(buffer); + + /* + * XLOG stuff + * + * NB: heap_abort_speculative() uses the same xlog record and replay + * routines. + */ + if (RelationNeedsWAL(relation)) + { + xl_heap_delete xlrec; + xl_heap_header xlhdr; + XLogRecPtr recptr; + + /* + * For logical decode we need combo CIDs to properly decode the + * catalog + */ + if (RelationIsAccessibleInLogicalDecoding(relation)) + log_heap_new_cid(relation, &tp); + + xlrec.flags = 0; + if (all_visible_cleared) + xlrec.flags |= XLH_DELETE_ALL_VISIBLE_CLEARED; + if (changingPart) + xlrec.flags |= XLH_DELETE_IS_PARTITION_MOVE; + xlrec.infobits_set = compute_infobits(tp.t_data->t_infomask, + tp.t_data->t_infomask2); + xlrec.offnum = ItemPointerGetOffsetNumber(&tp.t_self); + xlrec.xmax = new_xmax; + + if (old_key_tuple != NULL) + { + if (relation->rd_rel->relreplident == REPLICA_IDENTITY_FULL) + xlrec.flags |= XLH_DELETE_CONTAINS_OLD_TUPLE; + else + xlrec.flags |= XLH_DELETE_CONTAINS_OLD_KEY; + } + + XLogBeginInsert(); + XLogRegisterData((char *) &xlrec, SizeOfHeapDelete); + + XLogRegisterBuffer(0, buffer, REGBUF_STANDARD); + + /* + * Log replica identity of the deleted tuple if there is one + */ + if (old_key_tuple != NULL) + { + xlhdr.t_infomask2 = old_key_tuple->t_data->t_infomask2; + xlhdr.t_infomask = old_key_tuple->t_data->t_infomask; + xlhdr.t_hoff = old_key_tuple->t_data->t_hoff; + + XLogRegisterData((char *) &xlhdr, SizeOfHeapHeader); + XLogRegisterData((char *) old_key_tuple->t_data + + SizeofHeapTupleHeader, + old_key_tuple->t_len + - SizeofHeapTupleHeader); + } + + /* filtering by origin on a row level is much more efficient */ + XLogSetRecordFlags(XLOG_INCLUDE_ORIGIN); + + recptr = XLogInsert(RM_HEAP_ID, XLOG_HEAP_DELETE); + + PageSetLSN(page, recptr); + } + + END_CRIT_SECTION(); + + LockBuffer(buffer, BUFFER_LOCK_UNLOCK); + + if (vmbuffer != InvalidBuffer) + ReleaseBuffer(vmbuffer); + + /* + * If the tuple has toasted out-of-line attributes, we need to delete + * those items too. We have to do this before releasing the buffer + * because we need to look at the contents of the tuple, but it's OK to + * release the content lock on the buffer first. + */ + if (relation->rd_rel->relkind != RELKIND_RELATION && + relation->rd_rel->relkind != RELKIND_MATVIEW) + { + /* toast table entries should never be recursively toasted */ + Assert(!HeapTupleHasExternal(&tp)); + } + else if (HeapTupleHasExternal(&tp)) + heap_toast_delete(relation, &tp, false); + + /* + * Mark tuple for invalidation from system caches at next command + * boundary. We have to do this before releasing the buffer because we + * need to look at the contents of the tuple. + */ + CacheInvalidateHeapTuple(relation, &tp, NULL); + + /* Now we can release the buffer */ + ReleaseBuffer(buffer); + + /* + * Release the lmgr tuple lock, if we had it. + */ + if (have_tuple_lock) + UnlockTupleTuplock(relation, &(tp.t_self), LockTupleExclusive); + + pgstat_count_heap_delete(relation); + + if (old_key_tuple != NULL && old_key_copied) + heap_freetuple(old_key_tuple); + + return TM_Ok; +} + +/* + * simple_heap_delete - delete a tuple + * + * This routine may be used to delete a tuple when concurrent updates of + * the target tuple are not expected (for example, because we have a lock + * on the relation associated with the tuple). Any failure is reported + * via ereport(). + */ +void +simple_heap_delete(Relation relation, ItemPointer tid) +{ + TM_Result result; + TM_FailureData tmfd; + + result = heap_delete(relation, tid, + GetCurrentCommandId(true), InvalidSnapshot, + true /* wait for commit */ , + &tmfd, false /* changingPart */ ); + switch (result) + { + case TM_SelfModified: + /* Tuple was already updated in current command? */ + elog(ERROR, "tuple already updated by self"); + break; + + case TM_Ok: + /* done successfully */ + break; + + case TM_Updated: + elog(ERROR, "tuple concurrently updated"); + break; + + case TM_Deleted: + elog(ERROR, "tuple concurrently deleted"); + break; + + default: + elog(ERROR, "unrecognized heap_delete status: %u", result); + break; + } +} + +/* + * heap_update - replace a tuple + * + * See table_tuple_update() for an explanation of the parameters, except that + * this routine directly takes a tuple rather than a slot. + * + * In the failure cases, the routine fills *tmfd with the tuple's t_ctid, + * t_xmax (resolving a possible MultiXact, if necessary), and t_cmax (the last + * only for TM_SelfModified, since we cannot obtain cmax from a combo CID + * generated by another transaction). + */ +TM_Result +heap_update(Relation relation, ItemPointer otid, HeapTuple newtup, + CommandId cid, Snapshot crosscheck, bool wait, + TM_FailureData *tmfd, LockTupleMode *lockmode) +{ + TM_Result result; + TransactionId xid = GetCurrentTransactionId(); + Bitmapset *hot_attrs; + Bitmapset *key_attrs; + Bitmapset *id_attrs; + Bitmapset *interesting_attrs; + Bitmapset *modified_attrs; + ItemId lp; + HeapTupleData oldtup; + HeapTuple heaptup; + HeapTuple old_key_tuple = NULL; + bool old_key_copied = false; + Page page; + BlockNumber block; + MultiXactStatus mxact_status; + Buffer buffer, + newbuf, + vmbuffer = InvalidBuffer, + vmbuffer_new = InvalidBuffer; + bool need_toast; + Size newtupsize, + pagefree; + bool have_tuple_lock = false; + bool iscombo; + bool use_hot_update = false; + bool hot_attrs_checked = false; + bool key_intact; + bool all_visible_cleared = false; + bool all_visible_cleared_new = false; + bool checked_lockers; + bool locker_remains; + bool id_has_external = false; + TransactionId xmax_new_tuple, + xmax_old_tuple; + uint16 infomask_old_tuple, + infomask2_old_tuple, + infomask_new_tuple, + infomask2_new_tuple; + + Assert(ItemPointerIsValid(otid)); + + /* Cheap, simplistic check that the tuple matches the rel's rowtype. */ + Assert(HeapTupleHeaderGetNatts(newtup->t_data) <= + RelationGetNumberOfAttributes(relation)); + + /* + * Forbid this during a parallel operation, lest it allocate a combo CID. + * Other workers might need that combo CID for visibility checks, and we + * have no provision for broadcasting it to them. + */ + if (IsInParallelMode()) + ereport(ERROR, + (errcode(ERRCODE_INVALID_TRANSACTION_STATE), + errmsg("cannot update tuples during a parallel operation"))); + + /* + * Fetch the list of attributes to be checked for various operations. + * + * For HOT considerations, this is wasted effort if we fail to update or + * have to put the new tuple on a different page. But we must compute the + * list before obtaining buffer lock --- in the worst case, if we are + * doing an update on one of the relevant system catalogs, we could + * deadlock if we try to fetch the list later. In any case, the relcache + * caches the data so this is usually pretty cheap. + * + * We also need columns used by the replica identity and columns that are + * considered the "key" of rows in the table. + * + * Note that we get copies of each bitmap, so we need not worry about + * relcache flush happening midway through. + */ + hot_attrs = RelationGetIndexAttrBitmap(relation, INDEX_ATTR_BITMAP_ALL); + key_attrs = RelationGetIndexAttrBitmap(relation, INDEX_ATTR_BITMAP_KEY); + id_attrs = RelationGetIndexAttrBitmap(relation, + INDEX_ATTR_BITMAP_IDENTITY_KEY); + + + block = ItemPointerGetBlockNumber(otid); + buffer = ReadBuffer(relation, block); + page = BufferGetPage(buffer); + + interesting_attrs = NULL; + + /* + * If the page is already full, there is hardly any chance of doing a HOT + * update on this page. It might be wasteful effort to look for index + * column updates only to later reject HOT updates for lack of space in + * the same page. So we be conservative and only fetch hot_attrs if the + * page is not already full. Since we are already holding a pin on the + * buffer, there is no chance that the buffer can get cleaned up + * concurrently and even if that was possible, in the worst case we lose a + * chance to do a HOT update. + */ + if (!PageIsFull(page)) + { + interesting_attrs = bms_add_members(interesting_attrs, hot_attrs); + hot_attrs_checked = true; + } + interesting_attrs = bms_add_members(interesting_attrs, key_attrs); + interesting_attrs = bms_add_members(interesting_attrs, id_attrs); + + /* + * Before locking the buffer, pin the visibility map page if it appears to + * be necessary. Since we haven't got the lock yet, someone else might be + * in the middle of changing this, so we'll need to recheck after we have + * the lock. + */ + if (PageIsAllVisible(page)) + visibilitymap_pin(relation, block, &vmbuffer); + + LockBuffer(buffer, BUFFER_LOCK_EXCLUSIVE); + + lp = PageGetItemId(page, ItemPointerGetOffsetNumber(otid)); + Assert(ItemIdIsNormal(lp)); + + /* + * Fill in enough data in oldtup for HeapDetermineColumnsInfo to work + * properly. + */ + oldtup.t_tableOid = RelationGetRelid(relation); + oldtup.t_data = (HeapTupleHeader) PageGetItem(page, lp); + oldtup.t_len = ItemIdGetLength(lp); + oldtup.t_self = *otid; + + /* the new tuple is ready, except for this: */ + newtup->t_tableOid = RelationGetRelid(relation); + + /* + * Determine columns modified by the update. Additionally, identify + * whether any of the unmodified replica identity key attributes in the + * old tuple is externally stored or not. This is required because for + * such attributes the flattened value won't be WAL logged as part of the + * new tuple so we must include it as part of the old_key_tuple. See + * ExtractReplicaIdentity. + */ + modified_attrs = HeapDetermineColumnsInfo(relation, interesting_attrs, + id_attrs, &oldtup, + newtup, &id_has_external); + + /* + * If we're not updating any "key" column, we can grab a weaker lock type. + * This allows for more concurrency when we are running simultaneously + * with foreign key checks. + * + * Note that if a column gets detoasted while executing the update, but + * the value ends up being the same, this test will fail and we will use + * the stronger lock. This is acceptable; the important case to optimize + * is updates that don't manipulate key columns, not those that + * serendipitously arrive at the same key values. + */ + if (!bms_overlap(modified_attrs, key_attrs)) + { + *lockmode = LockTupleNoKeyExclusive; + mxact_status = MultiXactStatusNoKeyUpdate; + key_intact = true; + + /* + * If this is the first possibly-multixact-able operation in the + * current transaction, set my per-backend OldestMemberMXactId + * setting. We can be certain that the transaction will never become a + * member of any older MultiXactIds than that. (We have to do this + * even if we end up just using our own TransactionId below, since + * some other backend could incorporate our XID into a MultiXact + * immediately afterwards.) + */ + MultiXactIdSetOldestMember(); + } + else + { + *lockmode = LockTupleExclusive; + mxact_status = MultiXactStatusUpdate; + key_intact = false; + } + + /* + * Note: beyond this point, use oldtup not otid to refer to old tuple. + * otid may very well point at newtup->t_self, which we will overwrite + * with the new tuple's location, so there's great risk of confusion if we + * use otid anymore. + */ + +l2: + checked_lockers = false; + locker_remains = false; + result = HeapTupleSatisfiesUpdate(&oldtup, cid, buffer); + + /* see below about the "no wait" case */ + Assert(result != TM_BeingModified || wait); + + if (result == TM_Invisible) + { + UnlockReleaseBuffer(buffer); + ereport(ERROR, + (errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE), + errmsg("attempted to update invisible tuple"))); + } + else if (result == TM_BeingModified && wait) + { + TransactionId xwait; + uint16 infomask; + bool can_continue = false; + + /* + * XXX note that we don't consider the "no wait" case here. This + * isn't a problem currently because no caller uses that case, but it + * should be fixed if such a caller is introduced. It wasn't a + * problem previously because this code would always wait, but now + * that some tuple locks do not conflict with one of the lock modes we + * use, it is possible that this case is interesting to handle + * specially. + * + * This may cause failures with third-party code that calls + * heap_update directly. + */ + + /* must copy state data before unlocking buffer */ + xwait = HeapTupleHeaderGetRawXmax(oldtup.t_data); + infomask = oldtup.t_data->t_infomask; + + /* + * Now we have to do something about the existing locker. If it's a + * multi, sleep on it; we might be awakened before it is completely + * gone (or even not sleep at all in some cases); we need to preserve + * it as locker, unless it is gone completely. + * + * If it's not a multi, we need to check for sleeping conditions + * before actually going to sleep. If the update doesn't conflict + * with the locks, we just continue without sleeping (but making sure + * it is preserved). + * + * Before sleeping, we need to acquire tuple lock to establish our + * priority for the tuple (see heap_lock_tuple). LockTuple will + * release us when we are next-in-line for the tuple. Note we must + * not acquire the tuple lock until we're sure we're going to sleep; + * otherwise we're open for race conditions with other transactions + * holding the tuple lock which sleep on us. + * + * If we are forced to "start over" below, we keep the tuple lock; + * this arranges that we stay at the head of the line while rechecking + * tuple state. + */ + if (infomask & HEAP_XMAX_IS_MULTI) + { + TransactionId update_xact; + int remain; + bool current_is_member = false; + + if (DoesMultiXactIdConflict((MultiXactId) xwait, infomask, + *lockmode, ¤t_is_member)) + { + LockBuffer(buffer, BUFFER_LOCK_UNLOCK); + + /* + * Acquire the lock, if necessary (but skip it when we're + * requesting a lock and already have one; avoids deadlock). + */ + if (!current_is_member) + heap_acquire_tuplock(relation, &(oldtup.t_self), *lockmode, + LockWaitBlock, &have_tuple_lock); + + /* wait for multixact */ + MultiXactIdWait((MultiXactId) xwait, mxact_status, infomask, + relation, &oldtup.t_self, XLTW_Update, + &remain); + checked_lockers = true; + locker_remains = remain != 0; + LockBuffer(buffer, BUFFER_LOCK_EXCLUSIVE); + + /* + * If xwait had just locked the tuple then some other xact + * could update this tuple before we get to this point. Check + * for xmax change, and start over if so. + */ + if (xmax_infomask_changed(oldtup.t_data->t_infomask, + infomask) || + !TransactionIdEquals(HeapTupleHeaderGetRawXmax(oldtup.t_data), + xwait)) + goto l2; + } + + /* + * Note that the multixact may not be done by now. It could have + * surviving members; our own xact or other subxacts of this + * backend, and also any other concurrent transaction that locked + * the tuple with LockTupleKeyShare if we only got + * LockTupleNoKeyExclusive. If this is the case, we have to be + * careful to mark the updated tuple with the surviving members in + * Xmax. + * + * Note that there could have been another update in the + * MultiXact. In that case, we need to check whether it committed + * or aborted. If it aborted we are safe to update it again; + * otherwise there is an update conflict, and we have to return + * TableTuple{Deleted, Updated} below. + * + * In the LockTupleExclusive case, we still need to preserve the + * surviving members: those would include the tuple locks we had + * before this one, which are important to keep in case this + * subxact aborts. + */ + if (!HEAP_XMAX_IS_LOCKED_ONLY(oldtup.t_data->t_infomask)) + update_xact = HeapTupleGetUpdateXid(oldtup.t_data); + else + update_xact = InvalidTransactionId; + + /* + * There was no UPDATE in the MultiXact; or it aborted. No + * TransactionIdIsInProgress() call needed here, since we called + * MultiXactIdWait() above. + */ + if (!TransactionIdIsValid(update_xact) || + TransactionIdDidAbort(update_xact)) + can_continue = true; + } + else if (TransactionIdIsCurrentTransactionId(xwait)) + { + /* + * The only locker is ourselves; we can avoid grabbing the tuple + * lock here, but must preserve our locking information. + */ + checked_lockers = true; + locker_remains = true; + can_continue = true; + } + else if (HEAP_XMAX_IS_KEYSHR_LOCKED(infomask) && key_intact) + { + /* + * If it's just a key-share locker, and we're not changing the key + * columns, we don't need to wait for it to end; but we need to + * preserve it as locker. + */ + checked_lockers = true; + locker_remains = true; + can_continue = true; + } + else + { + /* + * Wait for regular transaction to end; but first, acquire tuple + * lock. + */ + LockBuffer(buffer, BUFFER_LOCK_UNLOCK); + heap_acquire_tuplock(relation, &(oldtup.t_self), *lockmode, + LockWaitBlock, &have_tuple_lock); + XactLockTableWait(xwait, relation, &oldtup.t_self, + XLTW_Update); + checked_lockers = true; + LockBuffer(buffer, BUFFER_LOCK_EXCLUSIVE); + + /* + * xwait is done, but if xwait had just locked the tuple then some + * other xact could update this tuple before we get to this point. + * Check for xmax change, and start over if so. + */ + if (xmax_infomask_changed(oldtup.t_data->t_infomask, infomask) || + !TransactionIdEquals(xwait, + HeapTupleHeaderGetRawXmax(oldtup.t_data))) + goto l2; + + /* Otherwise check if it committed or aborted */ + UpdateXmaxHintBits(oldtup.t_data, buffer, xwait); + if (oldtup.t_data->t_infomask & HEAP_XMAX_INVALID) + can_continue = true; + } + + if (can_continue) + result = TM_Ok; + else if (!ItemPointerEquals(&oldtup.t_self, &oldtup.t_data->t_ctid)) + result = TM_Updated; + else + result = TM_Deleted; + } + + if (crosscheck != InvalidSnapshot && result == TM_Ok) + { + /* Perform additional check for transaction-snapshot mode RI updates */ + if (!HeapTupleSatisfiesVisibility(&oldtup, crosscheck, buffer)) + { + result = TM_Updated; + Assert(!ItemPointerEquals(&oldtup.t_self, &oldtup.t_data->t_ctid)); + } + } + + if (result != TM_Ok) + { + Assert(result == TM_SelfModified || + result == TM_Updated || + result == TM_Deleted || + result == TM_BeingModified); + Assert(!(oldtup.t_data->t_infomask & HEAP_XMAX_INVALID)); + Assert(result != TM_Updated || + !ItemPointerEquals(&oldtup.t_self, &oldtup.t_data->t_ctid)); + tmfd->ctid = oldtup.t_data->t_ctid; + tmfd->xmax = HeapTupleHeaderGetUpdateXid(oldtup.t_data); + if (result == TM_SelfModified) + tmfd->cmax = HeapTupleHeaderGetCmax(oldtup.t_data); + else + tmfd->cmax = InvalidCommandId; + UnlockReleaseBuffer(buffer); + if (have_tuple_lock) + UnlockTupleTuplock(relation, &(oldtup.t_self), *lockmode); + if (vmbuffer != InvalidBuffer) + ReleaseBuffer(vmbuffer); + bms_free(hot_attrs); + bms_free(key_attrs); + bms_free(id_attrs); + bms_free(modified_attrs); + bms_free(interesting_attrs); + return result; + } + + /* + * If we didn't pin the visibility map page and the page has become all + * visible while we were busy locking the buffer, or during some + * subsequent window during which we had it unlocked, we'll have to unlock + * and re-lock, to avoid holding the buffer lock across an I/O. That's a + * bit unfortunate, especially since we'll now have to recheck whether the + * tuple has been locked or updated under us, but hopefully it won't + * happen very often. + */ + if (vmbuffer == InvalidBuffer && PageIsAllVisible(page)) + { + LockBuffer(buffer, BUFFER_LOCK_UNLOCK); + visibilitymap_pin(relation, block, &vmbuffer); + LockBuffer(buffer, BUFFER_LOCK_EXCLUSIVE); + goto l2; + } + + /* Fill in transaction status data */ + + /* + * If the tuple we're updating is locked, we need to preserve the locking + * info in the old tuple's Xmax. Prepare a new Xmax value for this. + */ + compute_new_xmax_infomask(HeapTupleHeaderGetRawXmax(oldtup.t_data), + oldtup.t_data->t_infomask, + oldtup.t_data->t_infomask2, + xid, *lockmode, true, + &xmax_old_tuple, &infomask_old_tuple, + &infomask2_old_tuple); + + /* + * And also prepare an Xmax value for the new copy of the tuple. If there + * was no xmax previously, or there was one but all lockers are now gone, + * then use InvalidXid; otherwise, get the xmax from the old tuple. (In + * rare cases that might also be InvalidXid and yet not have the + * HEAP_XMAX_INVALID bit set; that's fine.) + */ + if ((oldtup.t_data->t_infomask & HEAP_XMAX_INVALID) || + HEAP_LOCKED_UPGRADED(oldtup.t_data->t_infomask) || + (checked_lockers && !locker_remains)) + xmax_new_tuple = InvalidTransactionId; + else + xmax_new_tuple = HeapTupleHeaderGetRawXmax(oldtup.t_data); + + if (!TransactionIdIsValid(xmax_new_tuple)) + { + infomask_new_tuple = HEAP_XMAX_INVALID; + infomask2_new_tuple = 0; + } + else + { + /* + * If we found a valid Xmax for the new tuple, then the infomask bits + * to use on the new tuple depend on what was there on the old one. + * Note that since we're doing an update, the only possibility is that + * the lockers had FOR KEY SHARE lock. + */ + if (oldtup.t_data->t_infomask & HEAP_XMAX_IS_MULTI) + { + GetMultiXactIdHintBits(xmax_new_tuple, &infomask_new_tuple, + &infomask2_new_tuple); + } + else + { + infomask_new_tuple = HEAP_XMAX_KEYSHR_LOCK | HEAP_XMAX_LOCK_ONLY; + infomask2_new_tuple = 0; + } + } + + /* + * Prepare the new tuple with the appropriate initial values of Xmin and + * Xmax, as well as initial infomask bits as computed above. + */ + newtup->t_data->t_infomask &= ~(HEAP_XACT_MASK); + newtup->t_data->t_infomask2 &= ~(HEAP2_XACT_MASK); + HeapTupleHeaderSetXmin(newtup->t_data, xid); + HeapTupleHeaderSetCmin(newtup->t_data, cid); + newtup->t_data->t_infomask |= HEAP_UPDATED | infomask_new_tuple; + newtup->t_data->t_infomask2 |= infomask2_new_tuple; + HeapTupleHeaderSetXmax(newtup->t_data, xmax_new_tuple); + + /* + * Replace cid with a combo CID if necessary. Note that we already put + * the plain cid into the new tuple. + */ + HeapTupleHeaderAdjustCmax(oldtup.t_data, &cid, &iscombo); + + /* + * If the toaster needs to be activated, OR if the new tuple will not fit + * on the same page as the old, then we need to release the content lock + * (but not the pin!) on the old tuple's buffer while we are off doing + * TOAST and/or table-file-extension work. We must mark the old tuple to + * show that it's locked, else other processes may try to update it + * themselves. + * + * We need to invoke the toaster if there are already any out-of-line + * toasted values present, or if the new tuple is over-threshold. + */ + if (relation->rd_rel->relkind != RELKIND_RELATION && + relation->rd_rel->relkind != RELKIND_MATVIEW) + { + /* toast table entries should never be recursively toasted */ + Assert(!HeapTupleHasExternal(&oldtup)); + Assert(!HeapTupleHasExternal(newtup)); + need_toast = false; + } + else + need_toast = (HeapTupleHasExternal(&oldtup) || + HeapTupleHasExternal(newtup) || + newtup->t_len > TOAST_TUPLE_THRESHOLD); + + pagefree = PageGetHeapFreeSpace(page); + + newtupsize = MAXALIGN(newtup->t_len); + + if (need_toast || newtupsize > pagefree) + { + TransactionId xmax_lock_old_tuple; + uint16 infomask_lock_old_tuple, + infomask2_lock_old_tuple; + bool cleared_all_frozen = false; + + /* + * To prevent concurrent sessions from updating the tuple, we have to + * temporarily mark it locked, while we release the page-level lock. + * + * To satisfy the rule that any xid potentially appearing in a buffer + * written out to disk, we unfortunately have to WAL log this + * temporary modification. We can reuse xl_heap_lock for this + * purpose. If we crash/error before following through with the + * actual update, xmax will be of an aborted transaction, allowing + * other sessions to proceed. + */ + + /* + * Compute xmax / infomask appropriate for locking the tuple. This has + * to be done separately from the combo that's going to be used for + * updating, because the potentially created multixact would otherwise + * be wrong. + */ + compute_new_xmax_infomask(HeapTupleHeaderGetRawXmax(oldtup.t_data), + oldtup.t_data->t_infomask, + oldtup.t_data->t_infomask2, + xid, *lockmode, false, + &xmax_lock_old_tuple, &infomask_lock_old_tuple, + &infomask2_lock_old_tuple); + + Assert(HEAP_XMAX_IS_LOCKED_ONLY(infomask_lock_old_tuple)); + + START_CRIT_SECTION(); + + /* Clear obsolete visibility flags ... */ + oldtup.t_data->t_infomask &= ~(HEAP_XMAX_BITS | HEAP_MOVED); + oldtup.t_data->t_infomask2 &= ~HEAP_KEYS_UPDATED; + HeapTupleClearHotUpdated(&oldtup); + /* ... and store info about transaction updating this tuple */ + Assert(TransactionIdIsValid(xmax_lock_old_tuple)); + HeapTupleHeaderSetXmax(oldtup.t_data, xmax_lock_old_tuple); + oldtup.t_data->t_infomask |= infomask_lock_old_tuple; + oldtup.t_data->t_infomask2 |= infomask2_lock_old_tuple; + HeapTupleHeaderSetCmax(oldtup.t_data, cid, iscombo); + + /* temporarily make it look not-updated, but locked */ + oldtup.t_data->t_ctid = oldtup.t_self; + + /* + * Clear all-frozen bit on visibility map if needed. We could + * immediately reset ALL_VISIBLE, but given that the WAL logging + * overhead would be unchanged, that doesn't seem necessarily + * worthwhile. + */ + if (PageIsAllVisible(page) && + visibilitymap_clear(relation, block, vmbuffer, + VISIBILITYMAP_ALL_FROZEN)) + cleared_all_frozen = true; + + MarkBufferDirty(buffer); + + if (RelationNeedsWAL(relation)) + { + xl_heap_lock xlrec; + XLogRecPtr recptr; + + XLogBeginInsert(); + XLogRegisterBuffer(0, buffer, REGBUF_STANDARD); + + xlrec.offnum = ItemPointerGetOffsetNumber(&oldtup.t_self); + xlrec.locking_xid = xmax_lock_old_tuple; + xlrec.infobits_set = compute_infobits(oldtup.t_data->t_infomask, + oldtup.t_data->t_infomask2); + xlrec.flags = + cleared_all_frozen ? XLH_LOCK_ALL_FROZEN_CLEARED : 0; + XLogRegisterData((char *) &xlrec, SizeOfHeapLock); + recptr = XLogInsert(RM_HEAP_ID, XLOG_HEAP_LOCK); + PageSetLSN(page, recptr); + } + + END_CRIT_SECTION(); + + LockBuffer(buffer, BUFFER_LOCK_UNLOCK); + + /* + * Let the toaster do its thing, if needed. + * + * Note: below this point, heaptup is the data we actually intend to + * store into the relation; newtup is the caller's original untoasted + * data. + */ + if (need_toast) + { + /* Note we always use WAL and FSM during updates */ + heaptup = heap_toast_insert_or_update(relation, newtup, &oldtup, 0); + newtupsize = MAXALIGN(heaptup->t_len); + } + else + heaptup = newtup; + + /* + * Now, do we need a new page for the tuple, or not? This is a bit + * tricky since someone else could have added tuples to the page while + * we weren't looking. We have to recheck the available space after + * reacquiring the buffer lock. But don't bother to do that if the + * former amount of free space is still not enough; it's unlikely + * there's more free now than before. + * + * What's more, if we need to get a new page, we will need to acquire + * buffer locks on both old and new pages. To avoid deadlock against + * some other backend trying to get the same two locks in the other + * order, we must be consistent about the order we get the locks in. + * We use the rule "lock the lower-numbered page of the relation + * first". To implement this, we must do RelationGetBufferForTuple + * while not holding the lock on the old page, and we must rely on it + * to get the locks on both pages in the correct order. + * + * Another consideration is that we need visibility map page pin(s) if + * we will have to clear the all-visible flag on either page. If we + * call RelationGetBufferForTuple, we rely on it to acquire any such + * pins; but if we don't, we have to handle that here. Hence we need + * a loop. + */ + for (;;) + { + if (newtupsize > pagefree) + { + /* It doesn't fit, must use RelationGetBufferForTuple. */ + newbuf = RelationGetBufferForTuple(relation, heaptup->t_len, + buffer, 0, NULL, + &vmbuffer_new, &vmbuffer); + /* We're all done. */ + break; + } + /* Acquire VM page pin if needed and we don't have it. */ + if (vmbuffer == InvalidBuffer && PageIsAllVisible(page)) + visibilitymap_pin(relation, block, &vmbuffer); + /* Re-acquire the lock on the old tuple's page. */ + LockBuffer(buffer, BUFFER_LOCK_EXCLUSIVE); + /* Re-check using the up-to-date free space */ + pagefree = PageGetHeapFreeSpace(page); + if (newtupsize > pagefree || + (vmbuffer == InvalidBuffer && PageIsAllVisible(page))) + { + /* + * Rats, it doesn't fit anymore, or somebody just now set the + * all-visible flag. We must now unlock and loop to avoid + * deadlock. Fortunately, this path should seldom be taken. + */ + LockBuffer(buffer, BUFFER_LOCK_UNLOCK); + } + else + { + /* We're all done. */ + newbuf = buffer; + break; + } + } + } + else + { + /* No TOAST work needed, and it'll fit on same page */ + newbuf = buffer; + heaptup = newtup; + } + + /* + * We're about to do the actual update -- check for conflict first, to + * avoid possibly having to roll back work we've just done. + * + * This is safe without a recheck as long as there is no possibility of + * another process scanning the pages between this check and the update + * being visible to the scan (i.e., exclusive buffer content lock(s) are + * continuously held from this point until the tuple update is visible). + * + * For the new tuple the only check needed is at the relation level, but + * since both tuples are in the same relation and the check for oldtup + * will include checking the relation level, there is no benefit to a + * separate check for the new tuple. + */ + CheckForSerializableConflictIn(relation, &oldtup.t_self, + BufferGetBlockNumber(buffer)); + + /* + * At this point newbuf and buffer are both pinned and locked, and newbuf + * has enough space for the new tuple. If they are the same buffer, only + * one pin is held. + */ + + if (newbuf == buffer) + { + /* + * Since the new tuple is going into the same page, we might be able + * to do a HOT update. Check if any of the index columns have been + * changed. If the page was already full, we may have skipped checking + * for index columns, and also can't do a HOT update. + */ + if (hot_attrs_checked && !bms_overlap(modified_attrs, hot_attrs)) + use_hot_update = true; + } + else + { + /* Set a hint that the old page could use prune/defrag */ + PageSetFull(page); + } + + /* + * Compute replica identity tuple before entering the critical section so + * we don't PANIC upon a memory allocation failure. + * ExtractReplicaIdentity() will return NULL if nothing needs to be + * logged. Pass old key required as true only if the replica identity key + * columns are modified or it has external data. + */ + old_key_tuple = ExtractReplicaIdentity(relation, &oldtup, + bms_overlap(modified_attrs, id_attrs) || + id_has_external, + &old_key_copied); + + /* NO EREPORT(ERROR) from here till changes are logged */ + START_CRIT_SECTION(); + + /* + * If this transaction commits, the old tuple will become DEAD sooner or + * later. Set flag that this page is a candidate for pruning once our xid + * falls below the OldestXmin horizon. If the transaction finally aborts, + * the subsequent page pruning will be a no-op and the hint will be + * cleared. + * + * XXX Should we set hint on newbuf as well? If the transaction aborts, + * there would be a prunable tuple in the newbuf; but for now we choose + * not to optimize for aborts. Note that heap_xlog_update must be kept in + * sync if this decision changes. + */ + PageSetPrunable(page, xid); + + if (use_hot_update) + { + /* Mark the old tuple as HOT-updated */ + HeapTupleSetHotUpdated(&oldtup); + /* And mark the new tuple as heap-only */ + HeapTupleSetHeapOnly(heaptup); + /* Mark the caller's copy too, in case different from heaptup */ + HeapTupleSetHeapOnly(newtup); + } + else + { + /* Make sure tuples are correctly marked as not-HOT */ + HeapTupleClearHotUpdated(&oldtup); + HeapTupleClearHeapOnly(heaptup); + HeapTupleClearHeapOnly(newtup); + } + + RelationPutHeapTuple(relation, newbuf, heaptup, false); /* insert new tuple */ + + + /* Clear obsolete visibility flags, possibly set by ourselves above... */ + oldtup.t_data->t_infomask &= ~(HEAP_XMAX_BITS | HEAP_MOVED); + oldtup.t_data->t_infomask2 &= ~HEAP_KEYS_UPDATED; + /* ... and store info about transaction updating this tuple */ + Assert(TransactionIdIsValid(xmax_old_tuple)); + HeapTupleHeaderSetXmax(oldtup.t_data, xmax_old_tuple); + oldtup.t_data->t_infomask |= infomask_old_tuple; + oldtup.t_data->t_infomask2 |= infomask2_old_tuple; + HeapTupleHeaderSetCmax(oldtup.t_data, cid, iscombo); + + /* record address of new tuple in t_ctid of old one */ + oldtup.t_data->t_ctid = heaptup->t_self; + + /* clear PD_ALL_VISIBLE flags, reset all visibilitymap bits */ + if (PageIsAllVisible(BufferGetPage(buffer))) + { + all_visible_cleared = true; + PageClearAllVisible(BufferGetPage(buffer)); + visibilitymap_clear(relation, BufferGetBlockNumber(buffer), + vmbuffer, VISIBILITYMAP_VALID_BITS); + } + if (newbuf != buffer && PageIsAllVisible(BufferGetPage(newbuf))) + { + all_visible_cleared_new = true; + PageClearAllVisible(BufferGetPage(newbuf)); + visibilitymap_clear(relation, BufferGetBlockNumber(newbuf), + vmbuffer_new, VISIBILITYMAP_VALID_BITS); + } + + if (newbuf != buffer) + MarkBufferDirty(newbuf); + MarkBufferDirty(buffer); + + /* XLOG stuff */ + if (RelationNeedsWAL(relation)) + { + XLogRecPtr recptr; + + /* + * For logical decoding we need combo CIDs to properly decode the + * catalog. + */ + if (RelationIsAccessibleInLogicalDecoding(relation)) + { + log_heap_new_cid(relation, &oldtup); + log_heap_new_cid(relation, heaptup); + } + + recptr = log_heap_update(relation, buffer, + newbuf, &oldtup, heaptup, + old_key_tuple, + all_visible_cleared, + all_visible_cleared_new); + if (newbuf != buffer) + { + PageSetLSN(BufferGetPage(newbuf), recptr); + } + PageSetLSN(BufferGetPage(buffer), recptr); + } + + END_CRIT_SECTION(); + + if (newbuf != buffer) + LockBuffer(newbuf, BUFFER_LOCK_UNLOCK); + LockBuffer(buffer, BUFFER_LOCK_UNLOCK); + + /* + * Mark old tuple for invalidation from system caches at next command + * boundary, and mark the new tuple for invalidation in case we abort. We + * have to do this before releasing the buffer because oldtup is in the + * buffer. (heaptup is all in local memory, but it's necessary to process + * both tuple versions in one call to inval.c so we can avoid redundant + * sinval messages.) + */ + CacheInvalidateHeapTuple(relation, &oldtup, heaptup); + + /* Now we can release the buffer(s) */ + if (newbuf != buffer) + ReleaseBuffer(newbuf); + ReleaseBuffer(buffer); + if (BufferIsValid(vmbuffer_new)) + ReleaseBuffer(vmbuffer_new); + if (BufferIsValid(vmbuffer)) + ReleaseBuffer(vmbuffer); + + /* + * Release the lmgr tuple lock, if we had it. + */ + if (have_tuple_lock) + UnlockTupleTuplock(relation, &(oldtup.t_self), *lockmode); + + pgstat_count_heap_update(relation, use_hot_update); + + /* + * If heaptup is a private copy, release it. Don't forget to copy t_self + * back to the caller's image, too. + */ + if (heaptup != newtup) + { + newtup->t_self = heaptup->t_self; + heap_freetuple(heaptup); + } + + if (old_key_tuple != NULL && old_key_copied) + heap_freetuple(old_key_tuple); + + bms_free(hot_attrs); + bms_free(key_attrs); + bms_free(id_attrs); + bms_free(modified_attrs); + bms_free(interesting_attrs); + + return TM_Ok; +} + +/* + * Check if the specified attribute's values are the same. Subroutine for + * HeapDetermineColumnsInfo. + */ +static bool +heap_attr_equals(TupleDesc tupdesc, int attrnum, Datum value1, Datum value2, + bool isnull1, bool isnull2) +{ + Form_pg_attribute att; + + /* + * If one value is NULL and other is not, then they are certainly not + * equal + */ + if (isnull1 != isnull2) + return false; + + /* + * If both are NULL, they can be considered equal. + */ + if (isnull1) + return true; + + /* + * We do simple binary comparison of the two datums. This may be overly + * strict because there can be multiple binary representations for the + * same logical value. But we should be OK as long as there are no false + * positives. Using a type-specific equality operator is messy because + * there could be multiple notions of equality in different operator + * classes; furthermore, we cannot safely invoke user-defined functions + * while holding exclusive buffer lock. + */ + if (attrnum <= 0) + { + /* The only allowed system columns are OIDs, so do this */ + return (DatumGetObjectId(value1) == DatumGetObjectId(value2)); + } + else + { + Assert(attrnum <= tupdesc->natts); + att = TupleDescAttr(tupdesc, attrnum - 1); + return datumIsEqual(value1, value2, att->attbyval, att->attlen); + } +} + +/* + * Check which columns are being updated. + * + * Given an updated tuple, determine (and return into the output bitmapset), + * from those listed as interesting, the set of columns that changed. + * + * has_external indicates if any of the unmodified attributes (from those + * listed as interesting) of the old tuple is a member of external_cols and is + * stored externally. + * + * The input interesting_cols bitmapset is destructively modified; that is OK + * since this is invoked at most once in heap_update. + */ +static Bitmapset * +HeapDetermineColumnsInfo(Relation relation, + Bitmapset *interesting_cols, + Bitmapset *external_cols, + HeapTuple oldtup, HeapTuple newtup, + bool *has_external) +{ + int attrnum; + Bitmapset *modified = NULL; + TupleDesc tupdesc = RelationGetDescr(relation); + + while ((attrnum = bms_first_member(interesting_cols)) >= 0) + { + Datum value1, + value2; + bool isnull1, + isnull2; + + attrnum += FirstLowInvalidHeapAttributeNumber; + + /* + * If it's a whole-tuple reference, say "not equal". It's not really + * worth supporting this case, since it could only succeed after a + * no-op update, which is hardly a case worth optimizing for. + */ + if (attrnum == 0) + { + modified = bms_add_member(modified, + attrnum - + FirstLowInvalidHeapAttributeNumber); + continue; + } + + /* + * Likewise, automatically say "not equal" for any system attribute + * other than tableOID; we cannot expect these to be consistent in a + * HOT chain, or even to be set correctly yet in the new tuple. + */ + if (attrnum < 0) + { + if (attrnum != TableOidAttributeNumber) + { + modified = bms_add_member(modified, + attrnum - + FirstLowInvalidHeapAttributeNumber); + continue; + } + } + + /* + * Extract the corresponding values. XXX this is pretty inefficient + * if there are many indexed columns. Should we do a single + * heap_deform_tuple call on each tuple, instead? But that doesn't + * work for system columns ... + */ + value1 = heap_getattr(oldtup, attrnum, tupdesc, &isnull1); + value2 = heap_getattr(newtup, attrnum, tupdesc, &isnull2); + + if (!heap_attr_equals(tupdesc, attrnum, value1, + value2, isnull1, isnull2)) + { + modified = bms_add_member(modified, + attrnum - + FirstLowInvalidHeapAttributeNumber); + continue; + } + + /* + * No need to check attributes that can't be stored externally. Note + * that system attributes can't be stored externally. + */ + if (attrnum < 0 || isnull1 || + TupleDescAttr(tupdesc, attrnum - 1)->attlen != -1) + continue; + + /* + * Check if the old tuple's attribute is stored externally and is a + * member of external_cols. + */ + if (VARATT_IS_EXTERNAL((struct varlena *) DatumGetPointer(value1)) && + bms_is_member(attrnum - FirstLowInvalidHeapAttributeNumber, + external_cols)) + *has_external = true; + } + + return modified; +} + +/* + * simple_heap_update - replace a tuple + * + * This routine may be used to update a tuple when concurrent updates of + * the target tuple are not expected (for example, because we have a lock + * on the relation associated with the tuple). Any failure is reported + * via ereport(). + */ +void +simple_heap_update(Relation relation, ItemPointer otid, HeapTuple tup) +{ + TM_Result result; + TM_FailureData tmfd; + LockTupleMode lockmode; + + result = heap_update(relation, otid, tup, + GetCurrentCommandId(true), InvalidSnapshot, + true /* wait for commit */ , + &tmfd, &lockmode); + switch (result) + { + case TM_SelfModified: + /* Tuple was already updated in current command? */ + elog(ERROR, "tuple already updated by self"); + break; + + case TM_Ok: + /* done successfully */ + break; + + case TM_Updated: + elog(ERROR, "tuple concurrently updated"); + break; + + case TM_Deleted: + elog(ERROR, "tuple concurrently deleted"); + break; + + default: + elog(ERROR, "unrecognized heap_update status: %u", result); + break; + } +} + + +/* + * Return the MultiXactStatus corresponding to the given tuple lock mode. + */ +static MultiXactStatus +get_mxact_status_for_lock(LockTupleMode mode, bool is_update) +{ + int retval; + + if (is_update) + retval = tupleLockExtraInfo[mode].updstatus; + else + retval = tupleLockExtraInfo[mode].lockstatus; + + if (retval == -1) + elog(ERROR, "invalid lock tuple mode %d/%s", mode, + is_update ? "true" : "false"); + + return (MultiXactStatus) retval; +} + +/* + * heap_lock_tuple - lock a tuple in shared or exclusive mode + * + * Note that this acquires a buffer pin, which the caller must release. + * + * Input parameters: + * relation: relation containing tuple (caller must hold suitable lock) + * tid: TID of tuple to lock + * cid: current command ID (used for visibility test, and stored into + * tuple's cmax if lock is successful) + * mode: indicates if shared or exclusive tuple lock is desired + * wait_policy: what to do if tuple lock is not available + * follow_updates: if true, follow the update chain to also lock descendant + * tuples. + * + * Output parameters: + * *tuple: all fields filled in + * *buffer: set to buffer holding tuple (pinned but not locked at exit) + * *tmfd: filled in failure cases (see below) + * + * Function results are the same as the ones for table_tuple_lock(). + * + * In the failure cases other than TM_Invisible, the routine fills + * *tmfd with the tuple's t_ctid, t_xmax (resolving a possible MultiXact, + * if necessary), and t_cmax (the last only for TM_SelfModified, + * since we cannot obtain cmax from a combo CID generated by another + * transaction). + * See comments for struct TM_FailureData for additional info. + * + * See README.tuplock for a thorough explanation of this mechanism. + */ +TM_Result +heap_lock_tuple(Relation relation, HeapTuple tuple, + CommandId cid, LockTupleMode mode, LockWaitPolicy wait_policy, + bool follow_updates, + Buffer *buffer, TM_FailureData *tmfd) +{ + TM_Result result; + ItemPointer tid = &(tuple->t_self); + ItemId lp; + Page page; + Buffer vmbuffer = InvalidBuffer; + BlockNumber block; + TransactionId xid, + xmax; + uint16 old_infomask, + new_infomask, + new_infomask2; + bool first_time = true; + bool skip_tuple_lock = false; + bool have_tuple_lock = false; + bool cleared_all_frozen = false; + + *buffer = ReadBuffer(relation, ItemPointerGetBlockNumber(tid)); + block = ItemPointerGetBlockNumber(tid); + + /* + * Before locking the buffer, pin the visibility map page if it appears to + * be necessary. Since we haven't got the lock yet, someone else might be + * in the middle of changing this, so we'll need to recheck after we have + * the lock. + */ + if (PageIsAllVisible(BufferGetPage(*buffer))) + visibilitymap_pin(relation, block, &vmbuffer); + + LockBuffer(*buffer, BUFFER_LOCK_EXCLUSIVE); + + page = BufferGetPage(*buffer); + lp = PageGetItemId(page, ItemPointerGetOffsetNumber(tid)); + Assert(ItemIdIsNormal(lp)); + + tuple->t_data = (HeapTupleHeader) PageGetItem(page, lp); + tuple->t_len = ItemIdGetLength(lp); + tuple->t_tableOid = RelationGetRelid(relation); + +l3: + result = HeapTupleSatisfiesUpdate(tuple, cid, *buffer); + + if (result == TM_Invisible) + { + /* + * This is possible, but only when locking a tuple for ON CONFLICT + * UPDATE. We return this value here rather than throwing an error in + * order to give that case the opportunity to throw a more specific + * error. + */ + result = TM_Invisible; + goto out_locked; + } + else if (result == TM_BeingModified || + result == TM_Updated || + result == TM_Deleted) + { + TransactionId xwait; + uint16 infomask; + uint16 infomask2; + bool require_sleep; + ItemPointerData t_ctid; + + /* must copy state data before unlocking buffer */ + xwait = HeapTupleHeaderGetRawXmax(tuple->t_data); + infomask = tuple->t_data->t_infomask; + infomask2 = tuple->t_data->t_infomask2; + ItemPointerCopy(&tuple->t_data->t_ctid, &t_ctid); + + LockBuffer(*buffer, BUFFER_LOCK_UNLOCK); + + /* + * If any subtransaction of the current top transaction already holds + * a lock as strong as or stronger than what we're requesting, we + * effectively hold the desired lock already. We *must* succeed + * without trying to take the tuple lock, else we will deadlock + * against anyone wanting to acquire a stronger lock. + * + * Note we only do this the first time we loop on the HTSU result; + * there is no point in testing in subsequent passes, because + * evidently our own transaction cannot have acquired a new lock after + * the first time we checked. + */ + if (first_time) + { + first_time = false; + + if (infomask & HEAP_XMAX_IS_MULTI) + { + int i; + int nmembers; + MultiXactMember *members; + + /* + * We don't need to allow old multixacts here; if that had + * been the case, HeapTupleSatisfiesUpdate would have returned + * MayBeUpdated and we wouldn't be here. + */ + nmembers = + GetMultiXactIdMembers(xwait, &members, false, + HEAP_XMAX_IS_LOCKED_ONLY(infomask)); + + for (i = 0; i < nmembers; i++) + { + /* only consider members of our own transaction */ + if (!TransactionIdIsCurrentTransactionId(members[i].xid)) + continue; + + if (TUPLOCK_from_mxstatus(members[i].status) >= mode) + { + pfree(members); + result = TM_Ok; + goto out_unlocked; + } + else + { + /* + * Disable acquisition of the heavyweight tuple lock. + * Otherwise, when promoting a weaker lock, we might + * deadlock with another locker that has acquired the + * heavyweight tuple lock and is waiting for our + * transaction to finish. + * + * Note that in this case we still need to wait for + * the multixact if required, to avoid acquiring + * conflicting locks. + */ + skip_tuple_lock = true; + } + } + + if (members) + pfree(members); + } + else if (TransactionIdIsCurrentTransactionId(xwait)) + { + switch (mode) + { + case LockTupleKeyShare: + Assert(HEAP_XMAX_IS_KEYSHR_LOCKED(infomask) || + HEAP_XMAX_IS_SHR_LOCKED(infomask) || + HEAP_XMAX_IS_EXCL_LOCKED(infomask)); + result = TM_Ok; + goto out_unlocked; + case LockTupleShare: + if (HEAP_XMAX_IS_SHR_LOCKED(infomask) || + HEAP_XMAX_IS_EXCL_LOCKED(infomask)) + { + result = TM_Ok; + goto out_unlocked; + } + break; + case LockTupleNoKeyExclusive: + if (HEAP_XMAX_IS_EXCL_LOCKED(infomask)) + { + result = TM_Ok; + goto out_unlocked; + } + break; + case LockTupleExclusive: + if (HEAP_XMAX_IS_EXCL_LOCKED(infomask) && + infomask2 & HEAP_KEYS_UPDATED) + { + result = TM_Ok; + goto out_unlocked; + } + break; + } + } + } + + /* + * Initially assume that we will have to wait for the locking + * transaction(s) to finish. We check various cases below in which + * this can be turned off. + */ + require_sleep = true; + if (mode == LockTupleKeyShare) + { + /* + * If we're requesting KeyShare, and there's no update present, we + * don't need to wait. Even if there is an update, we can still + * continue if the key hasn't been modified. + * + * However, if there are updates, we need to walk the update chain + * to mark future versions of the row as locked, too. That way, + * if somebody deletes that future version, we're protected + * against the key going away. This locking of future versions + * could block momentarily, if a concurrent transaction is + * deleting a key; or it could return a value to the effect that + * the transaction deleting the key has already committed. So we + * do this before re-locking the buffer; otherwise this would be + * prone to deadlocks. + * + * Note that the TID we're locking was grabbed before we unlocked + * the buffer. For it to change while we're not looking, the + * other properties we're testing for below after re-locking the + * buffer would also change, in which case we would restart this + * loop above. + */ + if (!(infomask2 & HEAP_KEYS_UPDATED)) + { + bool updated; + + updated = !HEAP_XMAX_IS_LOCKED_ONLY(infomask); + + /* + * If there are updates, follow the update chain; bail out if + * that cannot be done. + */ + if (follow_updates && updated) + { + TM_Result res; + + res = heap_lock_updated_tuple(relation, tuple, &t_ctid, + GetCurrentTransactionId(), + mode); + if (res != TM_Ok) + { + result = res; + /* recovery code expects to have buffer lock held */ + LockBuffer(*buffer, BUFFER_LOCK_EXCLUSIVE); + goto failed; + } + } + + LockBuffer(*buffer, BUFFER_LOCK_EXCLUSIVE); + + /* + * Make sure it's still an appropriate lock, else start over. + * Also, if it wasn't updated before we released the lock, but + * is updated now, we start over too; the reason is that we + * now need to follow the update chain to lock the new + * versions. + */ + if (!HeapTupleHeaderIsOnlyLocked(tuple->t_data) && + ((tuple->t_data->t_infomask2 & HEAP_KEYS_UPDATED) || + !updated)) + goto l3; + + /* Things look okay, so we can skip sleeping */ + require_sleep = false; + + /* + * Note we allow Xmax to change here; other updaters/lockers + * could have modified it before we grabbed the buffer lock. + * However, this is not a problem, because with the recheck we + * just did we ensure that they still don't conflict with the + * lock we want. + */ + } + } + else if (mode == LockTupleShare) + { + /* + * If we're requesting Share, we can similarly avoid sleeping if + * there's no update and no exclusive lock present. + */ + if (HEAP_XMAX_IS_LOCKED_ONLY(infomask) && + !HEAP_XMAX_IS_EXCL_LOCKED(infomask)) + { + LockBuffer(*buffer, BUFFER_LOCK_EXCLUSIVE); + + /* + * Make sure it's still an appropriate lock, else start over. + * See above about allowing xmax to change. + */ + if (!HEAP_XMAX_IS_LOCKED_ONLY(tuple->t_data->t_infomask) || + HEAP_XMAX_IS_EXCL_LOCKED(tuple->t_data->t_infomask)) + goto l3; + require_sleep = false; + } + } + else if (mode == LockTupleNoKeyExclusive) + { + /* + * If we're requesting NoKeyExclusive, we might also be able to + * avoid sleeping; just ensure that there no conflicting lock + * already acquired. + */ + if (infomask & HEAP_XMAX_IS_MULTI) + { + if (!DoesMultiXactIdConflict((MultiXactId) xwait, infomask, + mode, NULL)) + { + /* + * No conflict, but if the xmax changed under us in the + * meantime, start over. + */ + LockBuffer(*buffer, BUFFER_LOCK_EXCLUSIVE); + if (xmax_infomask_changed(tuple->t_data->t_infomask, infomask) || + !TransactionIdEquals(HeapTupleHeaderGetRawXmax(tuple->t_data), + xwait)) + goto l3; + + /* otherwise, we're good */ + require_sleep = false; + } + } + else if (HEAP_XMAX_IS_KEYSHR_LOCKED(infomask)) + { + LockBuffer(*buffer, BUFFER_LOCK_EXCLUSIVE); + + /* if the xmax changed in the meantime, start over */ + if (xmax_infomask_changed(tuple->t_data->t_infomask, infomask) || + !TransactionIdEquals(HeapTupleHeaderGetRawXmax(tuple->t_data), + xwait)) + goto l3; + /* otherwise, we're good */ + require_sleep = false; + } + } + + /* + * As a check independent from those above, we can also avoid sleeping + * if the current transaction is the sole locker of the tuple. Note + * that the strength of the lock already held is irrelevant; this is + * not about recording the lock in Xmax (which will be done regardless + * of this optimization, below). Also, note that the cases where we + * hold a lock stronger than we are requesting are already handled + * above by not doing anything. + * + * Note we only deal with the non-multixact case here; MultiXactIdWait + * is well equipped to deal with this situation on its own. + */ + if (require_sleep && !(infomask & HEAP_XMAX_IS_MULTI) && + TransactionIdIsCurrentTransactionId(xwait)) + { + /* ... but if the xmax changed in the meantime, start over */ + LockBuffer(*buffer, BUFFER_LOCK_EXCLUSIVE); + if (xmax_infomask_changed(tuple->t_data->t_infomask, infomask) || + !TransactionIdEquals(HeapTupleHeaderGetRawXmax(tuple->t_data), + xwait)) + goto l3; + Assert(HEAP_XMAX_IS_LOCKED_ONLY(tuple->t_data->t_infomask)); + require_sleep = false; + } + + /* + * Time to sleep on the other transaction/multixact, if necessary. + * + * If the other transaction is an update/delete that's already + * committed, then sleeping cannot possibly do any good: if we're + * required to sleep, get out to raise an error instead. + * + * By here, we either have already acquired the buffer exclusive lock, + * or we must wait for the locking transaction or multixact; so below + * we ensure that we grab buffer lock after the sleep. + */ + if (require_sleep && (result == TM_Updated || result == TM_Deleted)) + { + LockBuffer(*buffer, BUFFER_LOCK_EXCLUSIVE); + goto failed; + } + else if (require_sleep) + { + /* + * Acquire tuple lock to establish our priority for the tuple, or + * die trying. LockTuple will release us when we are next-in-line + * for the tuple. We must do this even if we are share-locking, + * but not if we already have a weaker lock on the tuple. + * + * If we are forced to "start over" below, we keep the tuple lock; + * this arranges that we stay at the head of the line while + * rechecking tuple state. + */ + if (!skip_tuple_lock && + !heap_acquire_tuplock(relation, tid, mode, wait_policy, + &have_tuple_lock)) + { + /* + * This can only happen if wait_policy is Skip and the lock + * couldn't be obtained. + */ + result = TM_WouldBlock; + /* recovery code expects to have buffer lock held */ + LockBuffer(*buffer, BUFFER_LOCK_EXCLUSIVE); + goto failed; + } + + if (infomask & HEAP_XMAX_IS_MULTI) + { + MultiXactStatus status = get_mxact_status_for_lock(mode, false); + + /* We only ever lock tuples, never update them */ + if (status >= MultiXactStatusNoKeyUpdate) + elog(ERROR, "invalid lock mode in heap_lock_tuple"); + + /* wait for multixact to end, or die trying */ + switch (wait_policy) + { + case LockWaitBlock: + MultiXactIdWait((MultiXactId) xwait, status, infomask, + relation, &tuple->t_self, XLTW_Lock, NULL); + break; + case LockWaitSkip: + if (!ConditionalMultiXactIdWait((MultiXactId) xwait, + status, infomask, relation, + NULL)) + { + result = TM_WouldBlock; + /* recovery code expects to have buffer lock held */ + LockBuffer(*buffer, BUFFER_LOCK_EXCLUSIVE); + goto failed; + } + break; + case LockWaitError: + if (!ConditionalMultiXactIdWait((MultiXactId) xwait, + status, infomask, relation, + NULL)) + ereport(ERROR, + (errcode(ERRCODE_LOCK_NOT_AVAILABLE), + errmsg("could not obtain lock on row in relation \"%s\"", + RelationGetRelationName(relation)))); + + break; + } + + /* + * Of course, the multixact might not be done here: if we're + * requesting a light lock mode, other transactions with light + * locks could still be alive, as well as locks owned by our + * own xact or other subxacts of this backend. We need to + * preserve the surviving MultiXact members. Note that it + * isn't absolutely necessary in the latter case, but doing so + * is simpler. + */ + } + else + { + /* wait for regular transaction to end, or die trying */ + switch (wait_policy) + { + case LockWaitBlock: + XactLockTableWait(xwait, relation, &tuple->t_self, + XLTW_Lock); + break; + case LockWaitSkip: + if (!ConditionalXactLockTableWait(xwait)) + { + result = TM_WouldBlock; + /* recovery code expects to have buffer lock held */ + LockBuffer(*buffer, BUFFER_LOCK_EXCLUSIVE); + goto failed; + } + break; + case LockWaitError: + if (!ConditionalXactLockTableWait(xwait)) + ereport(ERROR, + (errcode(ERRCODE_LOCK_NOT_AVAILABLE), + errmsg("could not obtain lock on row in relation \"%s\"", + RelationGetRelationName(relation)))); + break; + } + } + + /* if there are updates, follow the update chain */ + if (follow_updates && !HEAP_XMAX_IS_LOCKED_ONLY(infomask)) + { + TM_Result res; + + res = heap_lock_updated_tuple(relation, tuple, &t_ctid, + GetCurrentTransactionId(), + mode); + if (res != TM_Ok) + { + result = res; + /* recovery code expects to have buffer lock held */ + LockBuffer(*buffer, BUFFER_LOCK_EXCLUSIVE); + goto failed; + } + } + + LockBuffer(*buffer, BUFFER_LOCK_EXCLUSIVE); + + /* + * xwait is done, but if xwait had just locked the tuple then some + * other xact could update this tuple before we get to this point. + * Check for xmax change, and start over if so. + */ + if (xmax_infomask_changed(tuple->t_data->t_infomask, infomask) || + !TransactionIdEquals(HeapTupleHeaderGetRawXmax(tuple->t_data), + xwait)) + goto l3; + + if (!(infomask & HEAP_XMAX_IS_MULTI)) + { + /* + * Otherwise check if it committed or aborted. Note we cannot + * be here if the tuple was only locked by somebody who didn't + * conflict with us; that would have been handled above. So + * that transaction must necessarily be gone by now. But + * don't check for this in the multixact case, because some + * locker transactions might still be running. + */ + UpdateXmaxHintBits(tuple->t_data, *buffer, xwait); + } + } + + /* By here, we're certain that we hold buffer exclusive lock again */ + + /* + * We may lock if previous xmax aborted, or if it committed but only + * locked the tuple without updating it; or if we didn't have to wait + * at all for whatever reason. + */ + if (!require_sleep || + (tuple->t_data->t_infomask & HEAP_XMAX_INVALID) || + HEAP_XMAX_IS_LOCKED_ONLY(tuple->t_data->t_infomask) || + HeapTupleHeaderIsOnlyLocked(tuple->t_data)) + result = TM_Ok; + else if (!ItemPointerEquals(&tuple->t_self, &tuple->t_data->t_ctid)) + result = TM_Updated; + else + result = TM_Deleted; + } + +failed: + if (result != TM_Ok) + { + Assert(result == TM_SelfModified || result == TM_Updated || + result == TM_Deleted || result == TM_WouldBlock); + + /* + * When locking a tuple under LockWaitSkip semantics and we fail with + * TM_WouldBlock above, it's possible for concurrent transactions to + * release the lock and set HEAP_XMAX_INVALID in the meantime. So + * this assert is slightly different from the equivalent one in + * heap_delete and heap_update. + */ + Assert((result == TM_WouldBlock) || + !(tuple->t_data->t_infomask & HEAP_XMAX_INVALID)); + Assert(result != TM_Updated || + !ItemPointerEquals(&tuple->t_self, &tuple->t_data->t_ctid)); + tmfd->ctid = tuple->t_data->t_ctid; + tmfd->xmax = HeapTupleHeaderGetUpdateXid(tuple->t_data); + if (result == TM_SelfModified) + tmfd->cmax = HeapTupleHeaderGetCmax(tuple->t_data); + else + tmfd->cmax = InvalidCommandId; + goto out_locked; + } + + /* + * If we didn't pin the visibility map page and the page has become all + * visible while we were busy locking the buffer, or during some + * subsequent window during which we had it unlocked, we'll have to unlock + * and re-lock, to avoid holding the buffer lock across I/O. That's a bit + * unfortunate, especially since we'll now have to recheck whether the + * tuple has been locked or updated under us, but hopefully it won't + * happen very often. + */ + if (vmbuffer == InvalidBuffer && PageIsAllVisible(page)) + { + LockBuffer(*buffer, BUFFER_LOCK_UNLOCK); + visibilitymap_pin(relation, block, &vmbuffer); + LockBuffer(*buffer, BUFFER_LOCK_EXCLUSIVE); + goto l3; + } + + xmax = HeapTupleHeaderGetRawXmax(tuple->t_data); + old_infomask = tuple->t_data->t_infomask; + + /* + * If this is the first possibly-multixact-able operation in the current + * transaction, set my per-backend OldestMemberMXactId setting. We can be + * certain that the transaction will never become a member of any older + * MultiXactIds than that. (We have to do this even if we end up just + * using our own TransactionId below, since some other backend could + * incorporate our XID into a MultiXact immediately afterwards.) + */ + MultiXactIdSetOldestMember(); + + /* + * Compute the new xmax and infomask to store into the tuple. Note we do + * not modify the tuple just yet, because that would leave it in the wrong + * state if multixact.c elogs. + */ + compute_new_xmax_infomask(xmax, old_infomask, tuple->t_data->t_infomask2, + GetCurrentTransactionId(), mode, false, + &xid, &new_infomask, &new_infomask2); + + START_CRIT_SECTION(); + + /* + * Store transaction information of xact locking the tuple. + * + * Note: Cmax is meaningless in this context, so don't set it; this avoids + * possibly generating a useless combo CID. Moreover, if we're locking a + * previously updated tuple, it's important to preserve the Cmax. + * + * Also reset the HOT UPDATE bit, but only if there's no update; otherwise + * we would break the HOT chain. + */ + tuple->t_data->t_infomask &= ~HEAP_XMAX_BITS; + tuple->t_data->t_infomask2 &= ~HEAP_KEYS_UPDATED; + tuple->t_data->t_infomask |= new_infomask; + tuple->t_data->t_infomask2 |= new_infomask2; + if (HEAP_XMAX_IS_LOCKED_ONLY(new_infomask)) + HeapTupleHeaderClearHotUpdated(tuple->t_data); + HeapTupleHeaderSetXmax(tuple->t_data, xid); + + /* + * Make sure there is no forward chain link in t_ctid. Note that in the + * cases where the tuple has been updated, we must not overwrite t_ctid, + * because it was set by the updater. Moreover, if the tuple has been + * updated, we need to follow the update chain to lock the new versions of + * the tuple as well. + */ + if (HEAP_XMAX_IS_LOCKED_ONLY(new_infomask)) + tuple->t_data->t_ctid = *tid; + + /* Clear only the all-frozen bit on visibility map if needed */ + if (PageIsAllVisible(page) && + visibilitymap_clear(relation, block, vmbuffer, + VISIBILITYMAP_ALL_FROZEN)) + cleared_all_frozen = true; + + + MarkBufferDirty(*buffer); + + /* + * XLOG stuff. You might think that we don't need an XLOG record because + * there is no state change worth restoring after a crash. You would be + * wrong however: we have just written either a TransactionId or a + * MultiXactId that may never have been seen on disk before, and we need + * to make sure that there are XLOG entries covering those ID numbers. + * Else the same IDs might be re-used after a crash, which would be + * disastrous if this page made it to disk before the crash. Essentially + * we have to enforce the WAL log-before-data rule even in this case. + * (Also, in a PITR log-shipping or 2PC environment, we have to have XLOG + * entries for everything anyway.) + */ + if (RelationNeedsWAL(relation)) + { + xl_heap_lock xlrec; + XLogRecPtr recptr; + + XLogBeginInsert(); + XLogRegisterBuffer(0, *buffer, REGBUF_STANDARD); + + xlrec.offnum = ItemPointerGetOffsetNumber(&tuple->t_self); + xlrec.locking_xid = xid; + xlrec.infobits_set = compute_infobits(new_infomask, + tuple->t_data->t_infomask2); + xlrec.flags = cleared_all_frozen ? XLH_LOCK_ALL_FROZEN_CLEARED : 0; + XLogRegisterData((char *) &xlrec, SizeOfHeapLock); + + /* we don't decode row locks atm, so no need to log the origin */ + + recptr = XLogInsert(RM_HEAP_ID, XLOG_HEAP_LOCK); + + PageSetLSN(page, recptr); + } + + END_CRIT_SECTION(); + + result = TM_Ok; + +out_locked: + LockBuffer(*buffer, BUFFER_LOCK_UNLOCK); + +out_unlocked: + if (BufferIsValid(vmbuffer)) + ReleaseBuffer(vmbuffer); + + /* + * Don't update the visibility map here. Locking a tuple doesn't change + * visibility info. + */ + + /* + * Now that we have successfully marked the tuple as locked, we can + * release the lmgr tuple lock, if we had it. + */ + if (have_tuple_lock) + UnlockTupleTuplock(relation, tid, mode); + + return result; +} + +/* + * Acquire heavyweight lock on the given tuple, in preparation for acquiring + * its normal, Xmax-based tuple lock. + * + * have_tuple_lock is an input and output parameter: on input, it indicates + * whether the lock has previously been acquired (and this function does + * nothing in that case). If this function returns success, have_tuple_lock + * has been flipped to true. + * + * Returns false if it was unable to obtain the lock; this can only happen if + * wait_policy is Skip. + */ +static bool +heap_acquire_tuplock(Relation relation, ItemPointer tid, LockTupleMode mode, + LockWaitPolicy wait_policy, bool *have_tuple_lock) +{ + if (*have_tuple_lock) + return true; + + switch (wait_policy) + { + case LockWaitBlock: + LockTupleTuplock(relation, tid, mode); + break; + + case LockWaitSkip: + if (!ConditionalLockTupleTuplock(relation, tid, mode)) + return false; + break; + + case LockWaitError: + if (!ConditionalLockTupleTuplock(relation, tid, mode)) + ereport(ERROR, + (errcode(ERRCODE_LOCK_NOT_AVAILABLE), + errmsg("could not obtain lock on row in relation \"%s\"", + RelationGetRelationName(relation)))); + break; + } + *have_tuple_lock = true; + + return true; +} + +/* + * Given an original set of Xmax and infomask, and a transaction (identified by + * add_to_xmax) acquiring a new lock of some mode, compute the new Xmax and + * corresponding infomasks to use on the tuple. + * + * Note that this might have side effects such as creating a new MultiXactId. + * + * Most callers will have called HeapTupleSatisfiesUpdate before this function; + * that will have set the HEAP_XMAX_INVALID bit if the xmax was a MultiXactId + * but it was not running anymore. There is a race condition, which is that the + * MultiXactId may have finished since then, but that uncommon case is handled + * either here, or within MultiXactIdExpand. + * + * There is a similar race condition possible when the old xmax was a regular + * TransactionId. We test TransactionIdIsInProgress again just to narrow the + * window, but it's still possible to end up creating an unnecessary + * MultiXactId. Fortunately this is harmless. + */ +static void +compute_new_xmax_infomask(TransactionId xmax, uint16 old_infomask, + uint16 old_infomask2, TransactionId add_to_xmax, + LockTupleMode mode, bool is_update, + TransactionId *result_xmax, uint16 *result_infomask, + uint16 *result_infomask2) +{ + TransactionId new_xmax; + uint16 new_infomask, + new_infomask2; + + Assert(TransactionIdIsCurrentTransactionId(add_to_xmax)); + +l5: + new_infomask = 0; + new_infomask2 = 0; + if (old_infomask & HEAP_XMAX_INVALID) + { + /* + * No previous locker; we just insert our own TransactionId. + * + * Note that it's critical that this case be the first one checked, + * because there are several blocks below that come back to this one + * to implement certain optimizations; old_infomask might contain + * other dirty bits in those cases, but we don't really care. + */ + if (is_update) + { + new_xmax = add_to_xmax; + if (mode == LockTupleExclusive) + new_infomask2 |= HEAP_KEYS_UPDATED; + } + else + { + new_infomask |= HEAP_XMAX_LOCK_ONLY; + switch (mode) + { + case LockTupleKeyShare: + new_xmax = add_to_xmax; + new_infomask |= HEAP_XMAX_KEYSHR_LOCK; + break; + case LockTupleShare: + new_xmax = add_to_xmax; + new_infomask |= HEAP_XMAX_SHR_LOCK; + break; + case LockTupleNoKeyExclusive: + new_xmax = add_to_xmax; + new_infomask |= HEAP_XMAX_EXCL_LOCK; + break; + case LockTupleExclusive: + new_xmax = add_to_xmax; + new_infomask |= HEAP_XMAX_EXCL_LOCK; + new_infomask2 |= HEAP_KEYS_UPDATED; + break; + default: + new_xmax = InvalidTransactionId; /* silence compiler */ + elog(ERROR, "invalid lock mode"); + } + } + } + else if (old_infomask & HEAP_XMAX_IS_MULTI) + { + MultiXactStatus new_status; + + /* + * Currently we don't allow XMAX_COMMITTED to be set for multis, so + * cross-check. + */ + Assert(!(old_infomask & HEAP_XMAX_COMMITTED)); + + /* + * A multixact together with LOCK_ONLY set but neither lock bit set + * (i.e. a pg_upgraded share locked tuple) cannot possibly be running + * anymore. This check is critical for databases upgraded by + * pg_upgrade; both MultiXactIdIsRunning and MultiXactIdExpand assume + * that such multis are never passed. + */ + if (HEAP_LOCKED_UPGRADED(old_infomask)) + { + old_infomask &= ~HEAP_XMAX_IS_MULTI; + old_infomask |= HEAP_XMAX_INVALID; + goto l5; + } + + /* + * If the XMAX is already a MultiXactId, then we need to expand it to + * include add_to_xmax; but if all the members were lockers and are + * all gone, we can do away with the IS_MULTI bit and just set + * add_to_xmax as the only locker/updater. If all lockers are gone + * and we have an updater that aborted, we can also do without a + * multi. + * + * The cost of doing GetMultiXactIdMembers would be paid by + * MultiXactIdExpand if we weren't to do this, so this check is not + * incurring extra work anyhow. + */ + if (!MultiXactIdIsRunning(xmax, HEAP_XMAX_IS_LOCKED_ONLY(old_infomask))) + { + if (HEAP_XMAX_IS_LOCKED_ONLY(old_infomask) || + !TransactionIdDidCommit(MultiXactIdGetUpdateXid(xmax, + old_infomask))) + { + /* + * Reset these bits and restart; otherwise fall through to + * create a new multi below. + */ + old_infomask &= ~HEAP_XMAX_IS_MULTI; + old_infomask |= HEAP_XMAX_INVALID; + goto l5; + } + } + + new_status = get_mxact_status_for_lock(mode, is_update); + + new_xmax = MultiXactIdExpand((MultiXactId) xmax, add_to_xmax, + new_status); + GetMultiXactIdHintBits(new_xmax, &new_infomask, &new_infomask2); + } + else if (old_infomask & HEAP_XMAX_COMMITTED) + { + /* + * It's a committed update, so we need to preserve him as updater of + * the tuple. + */ + MultiXactStatus status; + MultiXactStatus new_status; + + if (old_infomask2 & HEAP_KEYS_UPDATED) + status = MultiXactStatusUpdate; + else + status = MultiXactStatusNoKeyUpdate; + + new_status = get_mxact_status_for_lock(mode, is_update); + + /* + * since it's not running, it's obviously impossible for the old + * updater to be identical to the current one, so we need not check + * for that case as we do in the block above. + */ + new_xmax = MultiXactIdCreate(xmax, status, add_to_xmax, new_status); + GetMultiXactIdHintBits(new_xmax, &new_infomask, &new_infomask2); + } + else if (TransactionIdIsInProgress(xmax)) + { + /* + * If the XMAX is a valid, in-progress TransactionId, then we need to + * create a new MultiXactId that includes both the old locker or + * updater and our own TransactionId. + */ + MultiXactStatus new_status; + MultiXactStatus old_status; + LockTupleMode old_mode; + + if (HEAP_XMAX_IS_LOCKED_ONLY(old_infomask)) + { + if (HEAP_XMAX_IS_KEYSHR_LOCKED(old_infomask)) + old_status = MultiXactStatusForKeyShare; + else if (HEAP_XMAX_IS_SHR_LOCKED(old_infomask)) + old_status = MultiXactStatusForShare; + else if (HEAP_XMAX_IS_EXCL_LOCKED(old_infomask)) + { + if (old_infomask2 & HEAP_KEYS_UPDATED) + old_status = MultiXactStatusForUpdate; + else + old_status = MultiXactStatusForNoKeyUpdate; + } + else + { + /* + * LOCK_ONLY can be present alone only when a page has been + * upgraded by pg_upgrade. But in that case, + * TransactionIdIsInProgress() should have returned false. We + * assume it's no longer locked in this case. + */ + elog(WARNING, "LOCK_ONLY found for Xid in progress %u", xmax); + old_infomask |= HEAP_XMAX_INVALID; + old_infomask &= ~HEAP_XMAX_LOCK_ONLY; + goto l5; + } + } + else + { + /* it's an update, but which kind? */ + if (old_infomask2 & HEAP_KEYS_UPDATED) + old_status = MultiXactStatusUpdate; + else + old_status = MultiXactStatusNoKeyUpdate; + } + + old_mode = TUPLOCK_from_mxstatus(old_status); + + /* + * If the lock to be acquired is for the same TransactionId as the + * existing lock, there's an optimization possible: consider only the + * strongest of both locks as the only one present, and restart. + */ + if (xmax == add_to_xmax) + { + /* + * Note that it's not possible for the original tuple to be + * updated: we wouldn't be here because the tuple would have been + * invisible and we wouldn't try to update it. As a subtlety, + * this code can also run when traversing an update chain to lock + * future versions of a tuple. But we wouldn't be here either, + * because the add_to_xmax would be different from the original + * updater. + */ + Assert(HEAP_XMAX_IS_LOCKED_ONLY(old_infomask)); + + /* acquire the strongest of both */ + if (mode < old_mode) + mode = old_mode; + /* mustn't touch is_update */ + + old_infomask |= HEAP_XMAX_INVALID; + goto l5; + } + + /* otherwise, just fall back to creating a new multixact */ + new_status = get_mxact_status_for_lock(mode, is_update); + new_xmax = MultiXactIdCreate(xmax, old_status, + add_to_xmax, new_status); + GetMultiXactIdHintBits(new_xmax, &new_infomask, &new_infomask2); + } + else if (!HEAP_XMAX_IS_LOCKED_ONLY(old_infomask) && + TransactionIdDidCommit(xmax)) + { + /* + * It's a committed update, so we gotta preserve him as updater of the + * tuple. + */ + MultiXactStatus status; + MultiXactStatus new_status; + + if (old_infomask2 & HEAP_KEYS_UPDATED) + status = MultiXactStatusUpdate; + else + status = MultiXactStatusNoKeyUpdate; + + new_status = get_mxact_status_for_lock(mode, is_update); + + /* + * since it's not running, it's obviously impossible for the old + * updater to be identical to the current one, so we need not check + * for that case as we do in the block above. + */ + new_xmax = MultiXactIdCreate(xmax, status, add_to_xmax, new_status); + GetMultiXactIdHintBits(new_xmax, &new_infomask, &new_infomask2); + } + else + { + /* + * Can get here iff the locking/updating transaction was running when + * the infomask was extracted from the tuple, but finished before + * TransactionIdIsInProgress got to run. Deal with it as if there was + * no locker at all in the first place. + */ + old_infomask |= HEAP_XMAX_INVALID; + goto l5; + } + + *result_infomask = new_infomask; + *result_infomask2 = new_infomask2; + *result_xmax = new_xmax; +} + +/* + * Subroutine for heap_lock_updated_tuple_rec. + * + * Given a hypothetical multixact status held by the transaction identified + * with the given xid, does the current transaction need to wait, fail, or can + * it continue if it wanted to acquire a lock of the given mode? "needwait" + * is set to true if waiting is necessary; if it can continue, then TM_Ok is + * returned. If the lock is already held by the current transaction, return + * TM_SelfModified. In case of a conflict with another transaction, a + * different HeapTupleSatisfiesUpdate return code is returned. + * + * The held status is said to be hypothetical because it might correspond to a + * lock held by a single Xid, i.e. not a real MultiXactId; we express it this + * way for simplicity of API. + */ +static TM_Result +test_lockmode_for_conflict(MultiXactStatus status, TransactionId xid, + LockTupleMode mode, HeapTuple tup, + bool *needwait) +{ + MultiXactStatus wantedstatus; + + *needwait = false; + wantedstatus = get_mxact_status_for_lock(mode, false); + + /* + * Note: we *must* check TransactionIdIsInProgress before + * TransactionIdDidAbort/Commit; see comment at top of heapam_visibility.c + * for an explanation. + */ + if (TransactionIdIsCurrentTransactionId(xid)) + { + /* + * The tuple has already been locked by our own transaction. This is + * very rare but can happen if multiple transactions are trying to + * lock an ancient version of the same tuple. + */ + return TM_SelfModified; + } + else if (TransactionIdIsInProgress(xid)) + { + /* + * If the locking transaction is running, what we do depends on + * whether the lock modes conflict: if they do, then we must wait for + * it to finish; otherwise we can fall through to lock this tuple + * version without waiting. + */ + if (DoLockModesConflict(LOCKMODE_from_mxstatus(status), + LOCKMODE_from_mxstatus(wantedstatus))) + { + *needwait = true; + } + + /* + * If we set needwait above, then this value doesn't matter; + * otherwise, this value signals to caller that it's okay to proceed. + */ + return TM_Ok; + } + else if (TransactionIdDidAbort(xid)) + return TM_Ok; + else if (TransactionIdDidCommit(xid)) + { + /* + * The other transaction committed. If it was only a locker, then the + * lock is completely gone now and we can return success; but if it + * was an update, then what we do depends on whether the two lock + * modes conflict. If they conflict, then we must report error to + * caller. But if they don't, we can fall through to allow the current + * transaction to lock the tuple. + * + * Note: the reason we worry about ISUPDATE here is because as soon as + * a transaction ends, all its locks are gone and meaningless, and + * thus we can ignore them; whereas its updates persist. In the + * TransactionIdIsInProgress case, above, we don't need to check + * because we know the lock is still "alive" and thus a conflict needs + * always be checked. + */ + if (!ISUPDATE_from_mxstatus(status)) + return TM_Ok; + + if (DoLockModesConflict(LOCKMODE_from_mxstatus(status), + LOCKMODE_from_mxstatus(wantedstatus))) + { + /* bummer */ + if (!ItemPointerEquals(&tup->t_self, &tup->t_data->t_ctid)) + return TM_Updated; + else + return TM_Deleted; + } + + return TM_Ok; + } + + /* Not in progress, not aborted, not committed -- must have crashed */ + return TM_Ok; +} + + +/* + * Recursive part of heap_lock_updated_tuple + * + * Fetch the tuple pointed to by tid in rel, and mark it as locked by the given + * xid with the given mode; if this tuple is updated, recurse to lock the new + * version as well. + */ +static TM_Result +heap_lock_updated_tuple_rec(Relation rel, ItemPointer tid, TransactionId xid, + LockTupleMode mode) +{ + TM_Result result; + ItemPointerData tupid; + HeapTupleData mytup; + Buffer buf; + uint16 new_infomask, + new_infomask2, + old_infomask, + old_infomask2; + TransactionId xmax, + new_xmax; + TransactionId priorXmax = InvalidTransactionId; + bool cleared_all_frozen = false; + bool pinned_desired_page; + Buffer vmbuffer = InvalidBuffer; + BlockNumber block; + + ItemPointerCopy(tid, &tupid); + + for (;;) + { + new_infomask = 0; + new_xmax = InvalidTransactionId; + block = ItemPointerGetBlockNumber(&tupid); + ItemPointerCopy(&tupid, &(mytup.t_self)); + + if (!heap_fetch(rel, SnapshotAny, &mytup, &buf)) + { + /* + * if we fail to find the updated version of the tuple, it's + * because it was vacuumed/pruned away after its creator + * transaction aborted. So behave as if we got to the end of the + * chain, and there's no further tuple to lock: return success to + * caller. + */ + result = TM_Ok; + goto out_unlocked; + } + +l4: + CHECK_FOR_INTERRUPTS(); + + /* + * Before locking the buffer, pin the visibility map page if it + * appears to be necessary. Since we haven't got the lock yet, + * someone else might be in the middle of changing this, so we'll need + * to recheck after we have the lock. + */ + if (PageIsAllVisible(BufferGetPage(buf))) + { + visibilitymap_pin(rel, block, &vmbuffer); + pinned_desired_page = true; + } + else + pinned_desired_page = false; + + LockBuffer(buf, BUFFER_LOCK_EXCLUSIVE); + + /* + * If we didn't pin the visibility map page and the page has become + * all visible while we were busy locking the buffer, we'll have to + * unlock and re-lock, to avoid holding the buffer lock across I/O. + * That's a bit unfortunate, but hopefully shouldn't happen often. + * + * Note: in some paths through this function, we will reach here + * holding a pin on a vm page that may or may not be the one matching + * this page. If this page isn't all-visible, we won't use the vm + * page, but we hold onto such a pin till the end of the function. + */ + if (!pinned_desired_page && PageIsAllVisible(BufferGetPage(buf))) + { + LockBuffer(buf, BUFFER_LOCK_UNLOCK); + visibilitymap_pin(rel, block, &vmbuffer); + LockBuffer(buf, BUFFER_LOCK_EXCLUSIVE); + } + + /* + * Check the tuple XMIN against prior XMAX, if any. If we reached the + * end of the chain, we're done, so return success. + */ + if (TransactionIdIsValid(priorXmax) && + !TransactionIdEquals(HeapTupleHeaderGetXmin(mytup.t_data), + priorXmax)) + { + result = TM_Ok; + goto out_locked; + } + + /* + * Also check Xmin: if this tuple was created by an aborted + * (sub)transaction, then we already locked the last live one in the + * chain, thus we're done, so return success. + */ + if (TransactionIdDidAbort(HeapTupleHeaderGetXmin(mytup.t_data))) + { + result = TM_Ok; + goto out_locked; + } + + old_infomask = mytup.t_data->t_infomask; + old_infomask2 = mytup.t_data->t_infomask2; + xmax = HeapTupleHeaderGetRawXmax(mytup.t_data); + + /* + * If this tuple version has been updated or locked by some concurrent + * transaction(s), what we do depends on whether our lock mode + * conflicts with what those other transactions hold, and also on the + * status of them. + */ + if (!(old_infomask & HEAP_XMAX_INVALID)) + { + TransactionId rawxmax; + bool needwait; + + rawxmax = HeapTupleHeaderGetRawXmax(mytup.t_data); + if (old_infomask & HEAP_XMAX_IS_MULTI) + { + int nmembers; + int i; + MultiXactMember *members; + + /* + * We don't need a test for pg_upgrade'd tuples: this is only + * applied to tuples after the first in an update chain. Said + * first tuple in the chain may well be locked-in-9.2-and- + * pg_upgraded, but that one was already locked by our caller, + * not us; and any subsequent ones cannot be because our + * caller must necessarily have obtained a snapshot later than + * the pg_upgrade itself. + */ + Assert(!HEAP_LOCKED_UPGRADED(mytup.t_data->t_infomask)); + + nmembers = GetMultiXactIdMembers(rawxmax, &members, false, + HEAP_XMAX_IS_LOCKED_ONLY(old_infomask)); + for (i = 0; i < nmembers; i++) + { + result = test_lockmode_for_conflict(members[i].status, + members[i].xid, + mode, + &mytup, + &needwait); + + /* + * If the tuple was already locked by ourselves in a + * previous iteration of this (say heap_lock_tuple was + * forced to restart the locking loop because of a change + * in xmax), then we hold the lock already on this tuple + * version and we don't need to do anything; and this is + * not an error condition either. We just need to skip + * this tuple and continue locking the next version in the + * update chain. + */ + if (result == TM_SelfModified) + { + pfree(members); + goto next; + } + + if (needwait) + { + LockBuffer(buf, BUFFER_LOCK_UNLOCK); + XactLockTableWait(members[i].xid, rel, + &mytup.t_self, + XLTW_LockUpdated); + pfree(members); + goto l4; + } + if (result != TM_Ok) + { + pfree(members); + goto out_locked; + } + } + if (members) + pfree(members); + } + else + { + MultiXactStatus status; + + /* + * For a non-multi Xmax, we first need to compute the + * corresponding MultiXactStatus by using the infomask bits. + */ + if (HEAP_XMAX_IS_LOCKED_ONLY(old_infomask)) + { + if (HEAP_XMAX_IS_KEYSHR_LOCKED(old_infomask)) + status = MultiXactStatusForKeyShare; + else if (HEAP_XMAX_IS_SHR_LOCKED(old_infomask)) + status = MultiXactStatusForShare; + else if (HEAP_XMAX_IS_EXCL_LOCKED(old_infomask)) + { + if (old_infomask2 & HEAP_KEYS_UPDATED) + status = MultiXactStatusForUpdate; + else + status = MultiXactStatusForNoKeyUpdate; + } + else + { + /* + * LOCK_ONLY present alone (a pg_upgraded tuple marked + * as share-locked in the old cluster) shouldn't be + * seen in the middle of an update chain. + */ + elog(ERROR, "invalid lock status in tuple"); + } + } + else + { + /* it's an update, but which kind? */ + if (old_infomask2 & HEAP_KEYS_UPDATED) + status = MultiXactStatusUpdate; + else + status = MultiXactStatusNoKeyUpdate; + } + + result = test_lockmode_for_conflict(status, rawxmax, mode, + &mytup, &needwait); + + /* + * If the tuple was already locked by ourselves in a previous + * iteration of this (say heap_lock_tuple was forced to + * restart the locking loop because of a change in xmax), then + * we hold the lock already on this tuple version and we don't + * need to do anything; and this is not an error condition + * either. We just need to skip this tuple and continue + * locking the next version in the update chain. + */ + if (result == TM_SelfModified) + goto next; + + if (needwait) + { + LockBuffer(buf, BUFFER_LOCK_UNLOCK); + XactLockTableWait(rawxmax, rel, &mytup.t_self, + XLTW_LockUpdated); + goto l4; + } + if (result != TM_Ok) + { + goto out_locked; + } + } + } + + /* compute the new Xmax and infomask values for the tuple ... */ + compute_new_xmax_infomask(xmax, old_infomask, mytup.t_data->t_infomask2, + xid, mode, false, + &new_xmax, &new_infomask, &new_infomask2); + + if (PageIsAllVisible(BufferGetPage(buf)) && + visibilitymap_clear(rel, block, vmbuffer, + VISIBILITYMAP_ALL_FROZEN)) + cleared_all_frozen = true; + + START_CRIT_SECTION(); + + /* ... and set them */ + HeapTupleHeaderSetXmax(mytup.t_data, new_xmax); + mytup.t_data->t_infomask &= ~HEAP_XMAX_BITS; + mytup.t_data->t_infomask2 &= ~HEAP_KEYS_UPDATED; + mytup.t_data->t_infomask |= new_infomask; + mytup.t_data->t_infomask2 |= new_infomask2; + + MarkBufferDirty(buf); + + /* XLOG stuff */ + if (RelationNeedsWAL(rel)) + { + xl_heap_lock_updated xlrec; + XLogRecPtr recptr; + Page page = BufferGetPage(buf); + + XLogBeginInsert(); + XLogRegisterBuffer(0, buf, REGBUF_STANDARD); + + xlrec.offnum = ItemPointerGetOffsetNumber(&mytup.t_self); + xlrec.xmax = new_xmax; + xlrec.infobits_set = compute_infobits(new_infomask, new_infomask2); + xlrec.flags = + cleared_all_frozen ? XLH_LOCK_ALL_FROZEN_CLEARED : 0; + + XLogRegisterData((char *) &xlrec, SizeOfHeapLockUpdated); + + recptr = XLogInsert(RM_HEAP2_ID, XLOG_HEAP2_LOCK_UPDATED); + + PageSetLSN(page, recptr); + } + + END_CRIT_SECTION(); + +next: + /* if we find the end of update chain, we're done. */ + if (mytup.t_data->t_infomask & HEAP_XMAX_INVALID || + HeapTupleHeaderIndicatesMovedPartitions(mytup.t_data) || + ItemPointerEquals(&mytup.t_self, &mytup.t_data->t_ctid) || + HeapTupleHeaderIsOnlyLocked(mytup.t_data)) + { + result = TM_Ok; + goto out_locked; + } + + /* tail recursion */ + priorXmax = HeapTupleHeaderGetUpdateXid(mytup.t_data); + ItemPointerCopy(&(mytup.t_data->t_ctid), &tupid); + UnlockReleaseBuffer(buf); + } + + result = TM_Ok; + +out_locked: + UnlockReleaseBuffer(buf); + +out_unlocked: + if (vmbuffer != InvalidBuffer) + ReleaseBuffer(vmbuffer); + + return result; +} + +/* + * heap_lock_updated_tuple + * Follow update chain when locking an updated tuple, acquiring locks (row + * marks) on the updated versions. + * + * The initial tuple is assumed to be already locked. + * + * This function doesn't check visibility, it just unconditionally marks the + * tuple(s) as locked. If any tuple in the updated chain is being deleted + * concurrently (or updated with the key being modified), sleep until the + * transaction doing it is finished. + * + * Note that we don't acquire heavyweight tuple locks on the tuples we walk + * when we have to wait for other transactions to release them, as opposed to + * what heap_lock_tuple does. The reason is that having more than one + * transaction walking the chain is probably uncommon enough that risk of + * starvation is not likely: one of the preconditions for being here is that + * the snapshot in use predates the update that created this tuple (because we + * started at an earlier version of the tuple), but at the same time such a + * transaction cannot be using repeatable read or serializable isolation + * levels, because that would lead to a serializability failure. + */ +static TM_Result +heap_lock_updated_tuple(Relation rel, HeapTuple tuple, ItemPointer ctid, + TransactionId xid, LockTupleMode mode) +{ + /* + * If the tuple has not been updated, or has moved into another partition + * (effectively a delete) stop here. + */ + if (!HeapTupleHeaderIndicatesMovedPartitions(tuple->t_data) && + !ItemPointerEquals(&tuple->t_self, ctid)) + { + /* + * If this is the first possibly-multixact-able operation in the + * current transaction, set my per-backend OldestMemberMXactId + * setting. We can be certain that the transaction will never become a + * member of any older MultiXactIds than that. (We have to do this + * even if we end up just using our own TransactionId below, since + * some other backend could incorporate our XID into a MultiXact + * immediately afterwards.) + */ + MultiXactIdSetOldestMember(); + + return heap_lock_updated_tuple_rec(rel, ctid, xid, mode); + } + + /* nothing to lock */ + return TM_Ok; +} + +/* + * heap_finish_speculative - mark speculative insertion as successful + * + * To successfully finish a speculative insertion we have to clear speculative + * token from tuple. To do so the t_ctid field, which will contain a + * speculative token value, is modified in place to point to the tuple itself, + * which is characteristic of a newly inserted ordinary tuple. + * + * NB: It is not ok to commit without either finishing or aborting a + * speculative insertion. We could treat speculative tuples of committed + * transactions implicitly as completed, but then we would have to be prepared + * to deal with speculative tokens on committed tuples. That wouldn't be + * difficult - no-one looks at the ctid field of a tuple with invalid xmax - + * but clearing the token at completion isn't very expensive either. + * An explicit confirmation WAL record also makes logical decoding simpler. + */ +void +heap_finish_speculative(Relation relation, ItemPointer tid) +{ + Buffer buffer; + Page page; + OffsetNumber offnum; + ItemId lp = NULL; + HeapTupleHeader htup; + + buffer = ReadBuffer(relation, ItemPointerGetBlockNumber(tid)); + LockBuffer(buffer, BUFFER_LOCK_EXCLUSIVE); + page = (Page) BufferGetPage(buffer); + + offnum = ItemPointerGetOffsetNumber(tid); + if (PageGetMaxOffsetNumber(page) >= offnum) + lp = PageGetItemId(page, offnum); + + if (PageGetMaxOffsetNumber(page) < offnum || !ItemIdIsNormal(lp)) + elog(ERROR, "invalid lp"); + + htup = (HeapTupleHeader) PageGetItem(page, lp); + + /* SpecTokenOffsetNumber should be distinguishable from any real offset */ + StaticAssertStmt(MaxOffsetNumber < SpecTokenOffsetNumber, + "invalid speculative token constant"); + + /* NO EREPORT(ERROR) from here till changes are logged */ + START_CRIT_SECTION(); + + Assert(HeapTupleHeaderIsSpeculative(htup)); + + MarkBufferDirty(buffer); + + /* + * Replace the speculative insertion token with a real t_ctid, pointing to + * itself like it does on regular tuples. + */ + htup->t_ctid = *tid; + + /* XLOG stuff */ + if (RelationNeedsWAL(relation)) + { + xl_heap_confirm xlrec; + XLogRecPtr recptr; + + xlrec.offnum = ItemPointerGetOffsetNumber(tid); + + XLogBeginInsert(); + + /* We want the same filtering on this as on a plain insert */ + XLogSetRecordFlags(XLOG_INCLUDE_ORIGIN); + + XLogRegisterData((char *) &xlrec, SizeOfHeapConfirm); + XLogRegisterBuffer(0, buffer, REGBUF_STANDARD); + + recptr = XLogInsert(RM_HEAP_ID, XLOG_HEAP_CONFIRM); + + PageSetLSN(page, recptr); + } + + END_CRIT_SECTION(); + + UnlockReleaseBuffer(buffer); +} + +/* + * heap_abort_speculative - kill a speculatively inserted tuple + * + * Marks a tuple that was speculatively inserted in the same command as dead, + * by setting its xmin as invalid. That makes it immediately appear as dead + * to all transactions, including our own. In particular, it makes + * HeapTupleSatisfiesDirty() regard the tuple as dead, so that another backend + * inserting a duplicate key value won't unnecessarily wait for our whole + * transaction to finish (it'll just wait for our speculative insertion to + * finish). + * + * Killing the tuple prevents "unprincipled deadlocks", which are deadlocks + * that arise due to a mutual dependency that is not user visible. By + * definition, unprincipled deadlocks cannot be prevented by the user + * reordering lock acquisition in client code, because the implementation level + * lock acquisitions are not under the user's direct control. If speculative + * inserters did not take this precaution, then under high concurrency they + * could deadlock with each other, which would not be acceptable. + * + * This is somewhat redundant with heap_delete, but we prefer to have a + * dedicated routine with stripped down requirements. Note that this is also + * used to delete the TOAST tuples created during speculative insertion. + * + * This routine does not affect logical decoding as it only looks at + * confirmation records. + */ +void +heap_abort_speculative(Relation relation, ItemPointer tid) +{ + TransactionId xid = GetCurrentTransactionId(); + ItemId lp; + HeapTupleData tp; + Page page; + BlockNumber block; + Buffer buffer; + TransactionId prune_xid; + + Assert(ItemPointerIsValid(tid)); + + block = ItemPointerGetBlockNumber(tid); + buffer = ReadBuffer(relation, block); + page = BufferGetPage(buffer); + + LockBuffer(buffer, BUFFER_LOCK_EXCLUSIVE); + + /* + * Page can't be all visible, we just inserted into it, and are still + * running. + */ + Assert(!PageIsAllVisible(page)); + + lp = PageGetItemId(page, ItemPointerGetOffsetNumber(tid)); + Assert(ItemIdIsNormal(lp)); + + tp.t_tableOid = RelationGetRelid(relation); + tp.t_data = (HeapTupleHeader) PageGetItem(page, lp); + tp.t_len = ItemIdGetLength(lp); + tp.t_self = *tid; + + /* + * Sanity check that the tuple really is a speculatively inserted tuple, + * inserted by us. + */ + if (tp.t_data->t_choice.t_heap.t_xmin != xid) + elog(ERROR, "attempted to kill a tuple inserted by another transaction"); + if (!(IsToastRelation(relation) || HeapTupleHeaderIsSpeculative(tp.t_data))) + elog(ERROR, "attempted to kill a non-speculative tuple"); + Assert(!HeapTupleHeaderIsHeapOnly(tp.t_data)); + + /* + * No need to check for serializable conflicts here. There is never a + * need for a combo CID, either. No need to extract replica identity, or + * do anything special with infomask bits. + */ + + START_CRIT_SECTION(); + + /* + * The tuple will become DEAD immediately. Flag that this page is a + * candidate for pruning by setting xmin to TransactionXmin. While not + * immediately prunable, it is the oldest xid we can cheaply determine + * that's safe against wraparound / being older than the table's + * relfrozenxid. To defend against the unlikely case of a new relation + * having a newer relfrozenxid than our TransactionXmin, use relfrozenxid + * if so (vacuum can't subsequently move relfrozenxid to beyond + * TransactionXmin, so there's no race here). + */ + Assert(TransactionIdIsValid(TransactionXmin)); + if (TransactionIdPrecedes(TransactionXmin, relation->rd_rel->relfrozenxid)) + prune_xid = relation->rd_rel->relfrozenxid; + else + prune_xid = TransactionXmin; + PageSetPrunable(page, prune_xid); + + /* store transaction information of xact deleting the tuple */ + tp.t_data->t_infomask &= ~(HEAP_XMAX_BITS | HEAP_MOVED); + tp.t_data->t_infomask2 &= ~HEAP_KEYS_UPDATED; + + /* + * Set the tuple header xmin to InvalidTransactionId. This makes the + * tuple immediately invisible everyone. (In particular, to any + * transactions waiting on the speculative token, woken up later.) + */ + HeapTupleHeaderSetXmin(tp.t_data, InvalidTransactionId); + + /* Clear the speculative insertion token too */ + tp.t_data->t_ctid = tp.t_self; + + MarkBufferDirty(buffer); + + /* + * XLOG stuff + * + * The WAL records generated here match heap_delete(). The same recovery + * routines are used. + */ + if (RelationNeedsWAL(relation)) + { + xl_heap_delete xlrec; + XLogRecPtr recptr; + + xlrec.flags = XLH_DELETE_IS_SUPER; + xlrec.infobits_set = compute_infobits(tp.t_data->t_infomask, + tp.t_data->t_infomask2); + xlrec.offnum = ItemPointerGetOffsetNumber(&tp.t_self); + xlrec.xmax = xid; + + XLogBeginInsert(); + XLogRegisterData((char *) &xlrec, SizeOfHeapDelete); + XLogRegisterBuffer(0, buffer, REGBUF_STANDARD); + + /* No replica identity & replication origin logged */ + + recptr = XLogInsert(RM_HEAP_ID, XLOG_HEAP_DELETE); + + PageSetLSN(page, recptr); + } + + END_CRIT_SECTION(); + + LockBuffer(buffer, BUFFER_LOCK_UNLOCK); + + if (HeapTupleHasExternal(&tp)) + { + Assert(!IsToastRelation(relation)); + heap_toast_delete(relation, &tp, true); + } + + /* + * Never need to mark tuple for invalidation, since catalogs don't support + * speculative insertion + */ + + /* Now we can release the buffer */ + ReleaseBuffer(buffer); + + /* count deletion, as we counted the insertion too */ + pgstat_count_heap_delete(relation); +} + +/* + * heap_inplace_update - update a tuple "in place" (ie, overwrite it) + * + * Overwriting violates both MVCC and transactional safety, so the uses + * of this function in Postgres are extremely limited. Nonetheless we + * find some places to use it. + * + * The tuple cannot change size, and therefore it's reasonable to assume + * that its null bitmap (if any) doesn't change either. So we just + * overwrite the data portion of the tuple without touching the null + * bitmap or any of the header fields. + * + * tuple is an in-memory tuple structure containing the data to be written + * over the target tuple. Also, tuple->t_self identifies the target tuple. + * + * Note that the tuple updated here had better not come directly from the + * syscache if the relation has a toast relation as this tuple could + * include toast values that have been expanded, causing a failure here. + */ +void +heap_inplace_update(Relation relation, HeapTuple tuple) +{ + Buffer buffer; + Page page; + OffsetNumber offnum; + ItemId lp = NULL; + HeapTupleHeader htup; + uint32 oldlen; + uint32 newlen; + + /* + * For now, we don't allow parallel updates. Unlike a regular update, + * this should never create a combo CID, so it might be possible to relax + * this restriction, but not without more thought and testing. It's not + * clear that it would be useful, anyway. + */ + if (IsInParallelMode()) + ereport(ERROR, + (errcode(ERRCODE_INVALID_TRANSACTION_STATE), + errmsg("cannot update tuples during a parallel operation"))); + + buffer = ReadBuffer(relation, ItemPointerGetBlockNumber(&(tuple->t_self))); + LockBuffer(buffer, BUFFER_LOCK_EXCLUSIVE); + page = (Page) BufferGetPage(buffer); + + offnum = ItemPointerGetOffsetNumber(&(tuple->t_self)); + if (PageGetMaxOffsetNumber(page) >= offnum) + lp = PageGetItemId(page, offnum); + + if (PageGetMaxOffsetNumber(page) < offnum || !ItemIdIsNormal(lp)) + elog(ERROR, "invalid lp"); + + htup = (HeapTupleHeader) PageGetItem(page, lp); + + oldlen = ItemIdGetLength(lp) - htup->t_hoff; + newlen = tuple->t_len - tuple->t_data->t_hoff; + if (oldlen != newlen || htup->t_hoff != tuple->t_data->t_hoff) + elog(ERROR, "wrong tuple length"); + + /* NO EREPORT(ERROR) from here till changes are logged */ + START_CRIT_SECTION(); + + memcpy((char *) htup + htup->t_hoff, + (char *) tuple->t_data + tuple->t_data->t_hoff, + newlen); + + MarkBufferDirty(buffer); + + /* XLOG stuff */ + if (RelationNeedsWAL(relation)) + { + xl_heap_inplace xlrec; + XLogRecPtr recptr; + + xlrec.offnum = ItemPointerGetOffsetNumber(&tuple->t_self); + + XLogBeginInsert(); + XLogRegisterData((char *) &xlrec, SizeOfHeapInplace); + + XLogRegisterBuffer(0, buffer, REGBUF_STANDARD); + XLogRegisterBufData(0, (char *) htup + htup->t_hoff, newlen); + + /* inplace updates aren't decoded atm, don't log the origin */ + + recptr = XLogInsert(RM_HEAP_ID, XLOG_HEAP_INPLACE); + + PageSetLSN(page, recptr); + } + + END_CRIT_SECTION(); + + UnlockReleaseBuffer(buffer); + + /* + * Send out shared cache inval if necessary. Note that because we only + * pass the new version of the tuple, this mustn't be used for any + * operations that could change catcache lookup keys. But we aren't + * bothering with index updates either, so that's true a fortiori. + */ + if (!IsBootstrapProcessingMode()) + CacheInvalidateHeapTuple(relation, tuple, NULL); +} + +#define FRM_NOOP 0x0001 +#define FRM_INVALIDATE_XMAX 0x0002 +#define FRM_RETURN_IS_XID 0x0004 +#define FRM_RETURN_IS_MULTI 0x0008 +#define FRM_MARK_COMMITTED 0x0010 + +/* + * FreezeMultiXactId + * Determine what to do during freezing when a tuple is marked by a + * MultiXactId. + * + * NB -- this might have the side-effect of creating a new MultiXactId! + * + * "flags" is an output value; it's used to tell caller what to do on return. + * Possible flags are: + * FRM_NOOP + * don't do anything -- keep existing Xmax + * FRM_INVALIDATE_XMAX + * mark Xmax as InvalidTransactionId and set XMAX_INVALID flag. + * FRM_RETURN_IS_XID + * The Xid return value is a single update Xid to set as xmax. + * FRM_MARK_COMMITTED + * Xmax can be marked as HEAP_XMAX_COMMITTED + * FRM_RETURN_IS_MULTI + * The return value is a new MultiXactId to set as new Xmax. + * (caller must obtain proper infomask bits using GetMultiXactIdHintBits) + */ +static TransactionId +FreezeMultiXactId(MultiXactId multi, uint16 t_infomask, + TransactionId relfrozenxid, TransactionId relminmxid, + TransactionId cutoff_xid, MultiXactId cutoff_multi, + uint16 *flags) +{ + TransactionId xid = InvalidTransactionId; + int i; + MultiXactMember *members; + int nmembers; + bool need_replace; + int nnewmembers; + MultiXactMember *newmembers; + bool has_lockers; + TransactionId update_xid; + bool update_committed; + + *flags = 0; + + /* We should only be called in Multis */ + Assert(t_infomask & HEAP_XMAX_IS_MULTI); + + if (!MultiXactIdIsValid(multi) || + HEAP_LOCKED_UPGRADED(t_infomask)) + { + /* Ensure infomask bits are appropriately set/reset */ + *flags |= FRM_INVALIDATE_XMAX; + return InvalidTransactionId; + } + else if (MultiXactIdPrecedes(multi, relminmxid)) + ereport(ERROR, + (errcode(ERRCODE_DATA_CORRUPTED), + errmsg_internal("found multixact %u from before relminmxid %u", + multi, relminmxid))); + else if (MultiXactIdPrecedes(multi, cutoff_multi)) + { + /* + * This old multi cannot possibly have members still running, but + * verify just in case. If it was a locker only, it can be removed + * without any further consideration; but if it contained an update, + * we might need to preserve it. + */ + if (MultiXactIdIsRunning(multi, + HEAP_XMAX_IS_LOCKED_ONLY(t_infomask))) + ereport(ERROR, + (errcode(ERRCODE_DATA_CORRUPTED), + errmsg_internal("multixact %u from before cutoff %u found to be still running", + multi, cutoff_multi))); + + if (HEAP_XMAX_IS_LOCKED_ONLY(t_infomask)) + { + *flags |= FRM_INVALIDATE_XMAX; + xid = InvalidTransactionId; /* not strictly necessary */ + } + else + { + /* replace multi by update xid */ + xid = MultiXactIdGetUpdateXid(multi, t_infomask); + + /* wasn't only a lock, xid needs to be valid */ + Assert(TransactionIdIsValid(xid)); + + if (TransactionIdPrecedes(xid, relfrozenxid)) + ereport(ERROR, + (errcode(ERRCODE_DATA_CORRUPTED), + errmsg_internal("found update xid %u from before relfrozenxid %u", + xid, relfrozenxid))); + + /* + * If the xid is older than the cutoff, it has to have aborted, + * otherwise the tuple would have gotten pruned away. + */ + if (TransactionIdPrecedes(xid, cutoff_xid)) + { + if (TransactionIdDidCommit(xid)) + ereport(ERROR, + (errcode(ERRCODE_DATA_CORRUPTED), + errmsg_internal("cannot freeze committed update xid %u", xid))); + *flags |= FRM_INVALIDATE_XMAX; + xid = InvalidTransactionId; /* not strictly necessary */ + } + else + { + *flags |= FRM_RETURN_IS_XID; + } + } + + return xid; + } + + /* + * This multixact might have or might not have members still running, but + * we know it's valid and is newer than the cutoff point for multis. + * However, some member(s) of it may be below the cutoff for Xids, so we + * need to walk the whole members array to figure out what to do, if + * anything. + */ + + nmembers = + GetMultiXactIdMembers(multi, &members, false, + HEAP_XMAX_IS_LOCKED_ONLY(t_infomask)); + if (nmembers <= 0) + { + /* Nothing worth keeping */ + *flags |= FRM_INVALIDATE_XMAX; + return InvalidTransactionId; + } + + /* is there anything older than the cutoff? */ + need_replace = false; + for (i = 0; i < nmembers; i++) + { + if (TransactionIdPrecedes(members[i].xid, cutoff_xid)) + { + need_replace = true; + break; + } + } + + /* + * In the simplest case, there is no member older than the cutoff; we can + * keep the existing MultiXactId as is. + */ + if (!need_replace) + { + *flags |= FRM_NOOP; + pfree(members); + return InvalidTransactionId; + } + + /* + * If the multi needs to be updated, figure out which members do we need + * to keep. + */ + nnewmembers = 0; + newmembers = palloc(sizeof(MultiXactMember) * nmembers); + has_lockers = false; + update_xid = InvalidTransactionId; + update_committed = false; + + for (i = 0; i < nmembers; i++) + { + /* + * Determine whether to keep this member or ignore it. + */ + if (ISUPDATE_from_mxstatus(members[i].status)) + { + TransactionId xid = members[i].xid; + + Assert(TransactionIdIsValid(xid)); + if (TransactionIdPrecedes(xid, relfrozenxid)) + ereport(ERROR, + (errcode(ERRCODE_DATA_CORRUPTED), + errmsg_internal("found update xid %u from before relfrozenxid %u", + xid, relfrozenxid))); + + /* + * It's an update; should we keep it? If the transaction is known + * aborted or crashed then it's okay to ignore it, otherwise not. + * Note that an updater older than cutoff_xid cannot possibly be + * committed, because HeapTupleSatisfiesVacuum would have returned + * HEAPTUPLE_DEAD and we would not be trying to freeze the tuple. + * + * As with all tuple visibility routines, it's critical to test + * TransactionIdIsInProgress before TransactionIdDidCommit, + * because of race conditions explained in detail in + * heapam_visibility.c. + */ + if (TransactionIdIsCurrentTransactionId(xid) || + TransactionIdIsInProgress(xid)) + { + Assert(!TransactionIdIsValid(update_xid)); + update_xid = xid; + } + else if (TransactionIdDidCommit(xid)) + { + /* + * The transaction committed, so we can tell caller to set + * HEAP_XMAX_COMMITTED. (We can only do this because we know + * the transaction is not running.) + */ + Assert(!TransactionIdIsValid(update_xid)); + update_committed = true; + update_xid = xid; + } + else + { + /* + * Not in progress, not committed -- must be aborted or + * crashed; we can ignore it. + */ + } + + /* + * Since the tuple wasn't marked HEAPTUPLE_DEAD by vacuum, the + * update Xid cannot possibly be older than the xid cutoff. The + * presence of such a tuple would cause corruption, so be paranoid + * and check. + */ + if (TransactionIdIsValid(update_xid) && + TransactionIdPrecedes(update_xid, cutoff_xid)) + ereport(ERROR, + (errcode(ERRCODE_DATA_CORRUPTED), + errmsg_internal("found update xid %u from before xid cutoff %u", + update_xid, cutoff_xid))); + + /* + * If we determined that it's an Xid corresponding to an update + * that must be retained, additionally add it to the list of + * members of the new Multi, in case we end up using that. (We + * might still decide to use only an update Xid and not a multi, + * but it's easier to maintain the list as we walk the old members + * list.) + */ + if (TransactionIdIsValid(update_xid)) + newmembers[nnewmembers++] = members[i]; + } + else + { + /* We only keep lockers if they are still running */ + if (TransactionIdIsCurrentTransactionId(members[i].xid) || + TransactionIdIsInProgress(members[i].xid)) + { + /* running locker cannot possibly be older than the cutoff */ + Assert(!TransactionIdPrecedes(members[i].xid, cutoff_xid)); + newmembers[nnewmembers++] = members[i]; + has_lockers = true; + } + } + } + + pfree(members); + + if (nnewmembers == 0) + { + /* nothing worth keeping!? Tell caller to remove the whole thing */ + *flags |= FRM_INVALIDATE_XMAX; + xid = InvalidTransactionId; + } + else if (TransactionIdIsValid(update_xid) && !has_lockers) + { + /* + * If there's a single member and it's an update, pass it back alone + * without creating a new Multi. (XXX we could do this when there's a + * single remaining locker, too, but that would complicate the API too + * much; moreover, the case with the single updater is more + * interesting, because those are longer-lived.) + */ + Assert(nnewmembers == 1); + *flags |= FRM_RETURN_IS_XID; + if (update_committed) + *flags |= FRM_MARK_COMMITTED; + xid = update_xid; + } + else + { + /* + * Create a new multixact with the surviving members of the previous + * one, to set as new Xmax in the tuple. + */ + xid = MultiXactIdCreateFromMembers(nnewmembers, newmembers); + *flags |= FRM_RETURN_IS_MULTI; + } + + pfree(newmembers); + + return xid; +} + +/* + * heap_prepare_freeze_tuple + * + * Check to see whether any of the XID fields of a tuple (xmin, xmax, xvac) + * are older than the specified cutoff XID and cutoff MultiXactId. If so, + * setup enough state (in the *frz output argument) to later execute and + * WAL-log what we would need to do, and return true. Return false if nothing + * is to be changed. In addition, set *totally_frozen_p to true if the tuple + * will be totally frozen after these operations are performed and false if + * more freezing will eventually be required. + * + * Caller is responsible for setting the offset field, if appropriate. + * + * It is assumed that the caller has checked the tuple with + * HeapTupleSatisfiesVacuum() and determined that it is not HEAPTUPLE_DEAD + * (else we should be removing the tuple, not freezing it). + * + * NB: cutoff_xid *must* be <= the current global xmin, to ensure that any + * XID older than it could neither be running nor seen as running by any + * open transaction. This ensures that the replacement will not change + * anyone's idea of the tuple state. + * Similarly, cutoff_multi must be less than or equal to the smallest + * MultiXactId used by any transaction currently open. + * + * If the tuple is in a shared buffer, caller must hold an exclusive lock on + * that buffer. + * + * NB: It is not enough to set hint bits to indicate something is + * committed/invalid -- they might not be set on a standby, or after crash + * recovery. We really need to remove old xids. + */ +bool +heap_prepare_freeze_tuple(HeapTupleHeader tuple, + TransactionId relfrozenxid, TransactionId relminmxid, + TransactionId cutoff_xid, TransactionId cutoff_multi, + xl_heap_freeze_tuple *frz, bool *totally_frozen_p) +{ + bool changed = false; + bool xmax_already_frozen = false; + bool xmin_frozen; + bool freeze_xmax; + TransactionId xid; + + frz->frzflags = 0; + frz->t_infomask2 = tuple->t_infomask2; + frz->t_infomask = tuple->t_infomask; + frz->xmax = HeapTupleHeaderGetRawXmax(tuple); + + /* + * Process xmin. xmin_frozen has two slightly different meanings: in the + * !XidIsNormal case, it means "the xmin doesn't need any freezing" (it's + * already a permanent value), while in the block below it is set true to + * mean "xmin won't need freezing after what we do to it here" (false + * otherwise). In both cases we're allowed to set totally_frozen, as far + * as xmin is concerned. + */ + xid = HeapTupleHeaderGetXmin(tuple); + if (!TransactionIdIsNormal(xid)) + xmin_frozen = true; + else + { + if (TransactionIdPrecedes(xid, relfrozenxid)) + ereport(ERROR, + (errcode(ERRCODE_DATA_CORRUPTED), + errmsg_internal("found xmin %u from before relfrozenxid %u", + xid, relfrozenxid))); + + xmin_frozen = TransactionIdPrecedes(xid, cutoff_xid); + if (xmin_frozen) + { + if (!TransactionIdDidCommit(xid)) + ereport(ERROR, + (errcode(ERRCODE_DATA_CORRUPTED), + errmsg_internal("uncommitted xmin %u from before xid cutoff %u needs to be frozen", + xid, cutoff_xid))); + + frz->t_infomask |= HEAP_XMIN_FROZEN; + changed = true; + } + } + + /* + * Process xmax. To thoroughly examine the current Xmax value we need to + * resolve a MultiXactId to its member Xids, in case some of them are + * below the given cutoff for Xids. In that case, those values might need + * freezing, too. Also, if a multi needs freezing, we cannot simply take + * it out --- if there's a live updater Xid, it needs to be kept. + * + * Make sure to keep heap_tuple_needs_freeze in sync with this. + */ + xid = HeapTupleHeaderGetRawXmax(tuple); + + if (tuple->t_infomask & HEAP_XMAX_IS_MULTI) + { + TransactionId newxmax; + uint16 flags; + + newxmax = FreezeMultiXactId(xid, tuple->t_infomask, + relfrozenxid, relminmxid, + cutoff_xid, cutoff_multi, &flags); + + freeze_xmax = (flags & FRM_INVALIDATE_XMAX); + + if (flags & FRM_RETURN_IS_XID) + { + /* + * NB -- some of these transformations are only valid because we + * know the return Xid is a tuple updater (i.e. not merely a + * locker.) Also note that the only reason we don't explicitly + * worry about HEAP_KEYS_UPDATED is because it lives in + * t_infomask2 rather than t_infomask. + */ + frz->t_infomask &= ~HEAP_XMAX_BITS; + frz->xmax = newxmax; + if (flags & FRM_MARK_COMMITTED) + frz->t_infomask |= HEAP_XMAX_COMMITTED; + changed = true; + } + else if (flags & FRM_RETURN_IS_MULTI) + { + uint16 newbits; + uint16 newbits2; + + /* + * We can't use GetMultiXactIdHintBits directly on the new multi + * here; that routine initializes the masks to all zeroes, which + * would lose other bits we need. Doing it this way ensures all + * unrelated bits remain untouched. + */ + frz->t_infomask &= ~HEAP_XMAX_BITS; + frz->t_infomask2 &= ~HEAP_KEYS_UPDATED; + GetMultiXactIdHintBits(newxmax, &newbits, &newbits2); + frz->t_infomask |= newbits; + frz->t_infomask2 |= newbits2; + + frz->xmax = newxmax; + + changed = true; + } + } + else if (TransactionIdIsNormal(xid)) + { + if (TransactionIdPrecedes(xid, relfrozenxid)) + ereport(ERROR, + (errcode(ERRCODE_DATA_CORRUPTED), + errmsg_internal("found xmax %u from before relfrozenxid %u", + xid, relfrozenxid))); + + if (TransactionIdPrecedes(xid, cutoff_xid)) + { + /* + * If we freeze xmax, make absolutely sure that it's not an XID + * that is important. (Note, a lock-only xmax can be removed + * independent of committedness, since a committed lock holder has + * released the lock). + */ + if (!HEAP_XMAX_IS_LOCKED_ONLY(tuple->t_infomask) && + TransactionIdDidCommit(xid)) + ereport(ERROR, + (errcode(ERRCODE_DATA_CORRUPTED), + errmsg_internal("cannot freeze committed xmax %u", + xid))); + freeze_xmax = true; + } + else + freeze_xmax = false; + } + else if ((tuple->t_infomask & HEAP_XMAX_INVALID) || + !TransactionIdIsValid(HeapTupleHeaderGetRawXmax(tuple))) + { + freeze_xmax = false; + xmax_already_frozen = true; + } + else + ereport(ERROR, + (errcode(ERRCODE_DATA_CORRUPTED), + errmsg_internal("found xmax %u (infomask 0x%04x) not frozen, not multi, not normal", + xid, tuple->t_infomask))); + + if (freeze_xmax) + { + Assert(!xmax_already_frozen); + + frz->xmax = InvalidTransactionId; + + /* + * The tuple might be marked either XMAX_INVALID or XMAX_COMMITTED + + * LOCKED. Normalize to INVALID just to be sure no one gets confused. + * Also get rid of the HEAP_KEYS_UPDATED bit. + */ + frz->t_infomask &= ~HEAP_XMAX_BITS; + frz->t_infomask |= HEAP_XMAX_INVALID; + frz->t_infomask2 &= ~HEAP_HOT_UPDATED; + frz->t_infomask2 &= ~HEAP_KEYS_UPDATED; + changed = true; + } + + /* + * Old-style VACUUM FULL is gone, but we have to keep this code as long as + * we support having MOVED_OFF/MOVED_IN tuples in the database. + */ + if (tuple->t_infomask & HEAP_MOVED) + { + xid = HeapTupleHeaderGetXvac(tuple); + + /* + * For Xvac, we ignore the cutoff_xid and just always perform the + * freeze operation. The oldest release in which such a value can + * actually be set is PostgreSQL 8.4, because old-style VACUUM FULL + * was removed in PostgreSQL 9.0. Note that if we were to respect + * cutoff_xid here, we'd need to make surely to clear totally_frozen + * when we skipped freezing on that basis. + */ + if (TransactionIdIsNormal(xid)) + { + /* + * If a MOVED_OFF tuple is not dead, the xvac transaction must + * have failed; whereas a non-dead MOVED_IN tuple must mean the + * xvac transaction succeeded. + */ + if (tuple->t_infomask & HEAP_MOVED_OFF) + frz->frzflags |= XLH_INVALID_XVAC; + else + frz->frzflags |= XLH_FREEZE_XVAC; + + /* + * Might as well fix the hint bits too; usually XMIN_COMMITTED + * will already be set here, but there's a small chance not. + */ + Assert(!(tuple->t_infomask & HEAP_XMIN_INVALID)); + frz->t_infomask |= HEAP_XMIN_COMMITTED; + changed = true; + } + } + + *totally_frozen_p = (xmin_frozen && + (freeze_xmax || xmax_already_frozen)); + return changed; +} + +/* + * heap_execute_freeze_tuple + * Execute the prepared freezing of a tuple. + * + * Caller is responsible for ensuring that no other backend can access the + * storage underlying this tuple, either by holding an exclusive lock on the + * buffer containing it (which is what lazy VACUUM does), or by having it be + * in private storage (which is what CLUSTER and friends do). + * + * Note: it might seem we could make the changes without exclusive lock, since + * TransactionId read/write is assumed atomic anyway. However there is a race + * condition: someone who just fetched an old XID that we overwrite here could + * conceivably not finish checking the XID against pg_xact before we finish + * the VACUUM and perhaps truncate off the part of pg_xact he needs. Getting + * exclusive lock ensures no other backend is in process of checking the + * tuple status. Also, getting exclusive lock makes it safe to adjust the + * infomask bits. + * + * NB: All code in here must be safe to execute during crash recovery! + */ +void +heap_execute_freeze_tuple(HeapTupleHeader tuple, xl_heap_freeze_tuple *frz) +{ + HeapTupleHeaderSetXmax(tuple, frz->xmax); + + if (frz->frzflags & XLH_FREEZE_XVAC) + HeapTupleHeaderSetXvac(tuple, FrozenTransactionId); + + if (frz->frzflags & XLH_INVALID_XVAC) + HeapTupleHeaderSetXvac(tuple, InvalidTransactionId); + + tuple->t_infomask = frz->t_infomask; + tuple->t_infomask2 = frz->t_infomask2; +} + +/* + * heap_freeze_tuple + * Freeze tuple in place, without WAL logging. + * + * Useful for callers like CLUSTER that perform their own WAL logging. + */ +bool +heap_freeze_tuple(HeapTupleHeader tuple, + TransactionId relfrozenxid, TransactionId relminmxid, + TransactionId cutoff_xid, TransactionId cutoff_multi) +{ + xl_heap_freeze_tuple frz; + bool do_freeze; + bool tuple_totally_frozen; + + do_freeze = heap_prepare_freeze_tuple(tuple, + relfrozenxid, relminmxid, + cutoff_xid, cutoff_multi, + &frz, &tuple_totally_frozen); + + /* + * Note that because this is not a WAL-logged operation, we don't need to + * fill in the offset in the freeze record. + */ + + if (do_freeze) + heap_execute_freeze_tuple(tuple, &frz); + return do_freeze; +} + +/* + * For a given MultiXactId, return the hint bits that should be set in the + * tuple's infomask. + * + * Normally this should be called for a multixact that was just created, and + * so is on our local cache, so the GetMembers call is fast. + */ +static void +GetMultiXactIdHintBits(MultiXactId multi, uint16 *new_infomask, + uint16 *new_infomask2) +{ + int nmembers; + MultiXactMember *members; + int i; + uint16 bits = HEAP_XMAX_IS_MULTI; + uint16 bits2 = 0; + bool has_update = false; + LockTupleMode strongest = LockTupleKeyShare; + + /* + * We only use this in multis we just created, so they cannot be values + * pre-pg_upgrade. + */ + nmembers = GetMultiXactIdMembers(multi, &members, false, false); + + for (i = 0; i < nmembers; i++) + { + LockTupleMode mode; + + /* + * Remember the strongest lock mode held by any member of the + * multixact. + */ + mode = TUPLOCK_from_mxstatus(members[i].status); + if (mode > strongest) + strongest = mode; + + /* See what other bits we need */ + switch (members[i].status) + { + case MultiXactStatusForKeyShare: + case MultiXactStatusForShare: + case MultiXactStatusForNoKeyUpdate: + break; + + case MultiXactStatusForUpdate: + bits2 |= HEAP_KEYS_UPDATED; + break; + + case MultiXactStatusNoKeyUpdate: + has_update = true; + break; + + case MultiXactStatusUpdate: + bits2 |= HEAP_KEYS_UPDATED; + has_update = true; + break; + } + } + + if (strongest == LockTupleExclusive || + strongest == LockTupleNoKeyExclusive) + bits |= HEAP_XMAX_EXCL_LOCK; + else if (strongest == LockTupleShare) + bits |= HEAP_XMAX_SHR_LOCK; + else if (strongest == LockTupleKeyShare) + bits |= HEAP_XMAX_KEYSHR_LOCK; + + if (!has_update) + bits |= HEAP_XMAX_LOCK_ONLY; + + if (nmembers > 0) + pfree(members); + + *new_infomask = bits; + *new_infomask2 = bits2; +} + +/* + * MultiXactIdGetUpdateXid + * + * Given a multixact Xmax and corresponding infomask, which does not have the + * HEAP_XMAX_LOCK_ONLY bit set, obtain and return the Xid of the updating + * transaction. + * + * Caller is expected to check the status of the updating transaction, if + * necessary. + */ +static TransactionId +MultiXactIdGetUpdateXid(TransactionId xmax, uint16 t_infomask) +{ + TransactionId update_xact = InvalidTransactionId; + MultiXactMember *members; + int nmembers; + + Assert(!(t_infomask & HEAP_XMAX_LOCK_ONLY)); + Assert(t_infomask & HEAP_XMAX_IS_MULTI); + + /* + * Since we know the LOCK_ONLY bit is not set, this cannot be a multi from + * pre-pg_upgrade. + */ + nmembers = GetMultiXactIdMembers(xmax, &members, false, false); + + if (nmembers > 0) + { + int i; + + for (i = 0; i < nmembers; i++) + { + /* Ignore lockers */ + if (!ISUPDATE_from_mxstatus(members[i].status)) + continue; + + /* there can be at most one updater */ + Assert(update_xact == InvalidTransactionId); + update_xact = members[i].xid; +#ifndef USE_ASSERT_CHECKING + + /* + * in an assert-enabled build, walk the whole array to ensure + * there's no other updater. + */ + break; +#endif + } + + pfree(members); + } + + return update_xact; +} + +/* + * HeapTupleGetUpdateXid + * As above, but use a HeapTupleHeader + * + * See also HeapTupleHeaderGetUpdateXid, which can be used without previously + * checking the hint bits. + */ +TransactionId +HeapTupleGetUpdateXid(HeapTupleHeader tuple) +{ + return MultiXactIdGetUpdateXid(HeapTupleHeaderGetRawXmax(tuple), + tuple->t_infomask); +} + +/* + * Does the given multixact conflict with the current transaction grabbing a + * tuple lock of the given strength? + * + * The passed infomask pairs up with the given multixact in the tuple header. + * + * If current_is_member is not NULL, it is set to 'true' if the current + * transaction is a member of the given multixact. + */ +static bool +DoesMultiXactIdConflict(MultiXactId multi, uint16 infomask, + LockTupleMode lockmode, bool *current_is_member) +{ + int nmembers; + MultiXactMember *members; + bool result = false; + LOCKMODE wanted = tupleLockExtraInfo[lockmode].hwlock; + + if (HEAP_LOCKED_UPGRADED(infomask)) + return false; + + nmembers = GetMultiXactIdMembers(multi, &members, false, + HEAP_XMAX_IS_LOCKED_ONLY(infomask)); + if (nmembers >= 0) + { + int i; + + for (i = 0; i < nmembers; i++) + { + TransactionId memxid; + LOCKMODE memlockmode; + + if (result && (current_is_member == NULL || *current_is_member)) + break; + + memlockmode = LOCKMODE_from_mxstatus(members[i].status); + + /* ignore members from current xact (but track their presence) */ + memxid = members[i].xid; + if (TransactionIdIsCurrentTransactionId(memxid)) + { + if (current_is_member != NULL) + *current_is_member = true; + continue; + } + else if (result) + continue; + + /* ignore members that don't conflict with the lock we want */ + if (!DoLockModesConflict(memlockmode, wanted)) + continue; + + if (ISUPDATE_from_mxstatus(members[i].status)) + { + /* ignore aborted updaters */ + if (TransactionIdDidAbort(memxid)) + continue; + } + else + { + /* ignore lockers-only that are no longer in progress */ + if (!TransactionIdIsInProgress(memxid)) + continue; + } + + /* + * Whatever remains are either live lockers that conflict with our + * wanted lock, and updaters that are not aborted. Those conflict + * with what we want. Set up to return true, but keep going to + * look for the current transaction among the multixact members, + * if needed. + */ + result = true; + } + pfree(members); + } + + return result; +} + +/* + * Do_MultiXactIdWait + * Actual implementation for the two functions below. + * + * 'multi', 'status' and 'infomask' indicate what to sleep on (the status is + * needed to ensure we only sleep on conflicting members, and the infomask is + * used to optimize multixact access in case it's a lock-only multi); 'nowait' + * indicates whether to use conditional lock acquisition, to allow callers to + * fail if lock is unavailable. 'rel', 'ctid' and 'oper' are used to set up + * context information for error messages. 'remaining', if not NULL, receives + * the number of members that are still running, including any (non-aborted) + * subtransactions of our own transaction. + * + * We do this by sleeping on each member using XactLockTableWait. Any + * members that belong to the current backend are *not* waited for, however; + * this would not merely be useless but would lead to Assert failure inside + * XactLockTableWait. By the time this returns, it is certain that all + * transactions *of other backends* that were members of the MultiXactId + * that conflict with the requested status are dead (and no new ones can have + * been added, since it is not legal to add members to an existing + * MultiXactId). + * + * But by the time we finish sleeping, someone else may have changed the Xmax + * of the containing tuple, so the caller needs to iterate on us somehow. + * + * Note that in case we return false, the number of remaining members is + * not to be trusted. + */ +static bool +Do_MultiXactIdWait(MultiXactId multi, MultiXactStatus status, + uint16 infomask, bool nowait, + Relation rel, ItemPointer ctid, XLTW_Oper oper, + int *remaining) +{ + bool result = true; + MultiXactMember *members; + int nmembers; + int remain = 0; + + /* for pre-pg_upgrade tuples, no need to sleep at all */ + nmembers = HEAP_LOCKED_UPGRADED(infomask) ? -1 : + GetMultiXactIdMembers(multi, &members, false, + HEAP_XMAX_IS_LOCKED_ONLY(infomask)); + + if (nmembers >= 0) + { + int i; + + for (i = 0; i < nmembers; i++) + { + TransactionId memxid = members[i].xid; + MultiXactStatus memstatus = members[i].status; + + if (TransactionIdIsCurrentTransactionId(memxid)) + { + remain++; + continue; + } + + if (!DoLockModesConflict(LOCKMODE_from_mxstatus(memstatus), + LOCKMODE_from_mxstatus(status))) + { + if (remaining && TransactionIdIsInProgress(memxid)) + remain++; + continue; + } + + /* + * This member conflicts with our multi, so we have to sleep (or + * return failure, if asked to avoid waiting.) + * + * Note that we don't set up an error context callback ourselves, + * but instead we pass the info down to XactLockTableWait. This + * might seem a bit wasteful because the context is set up and + * tore down for each member of the multixact, but in reality it + * should be barely noticeable, and it avoids duplicate code. + */ + if (nowait) + { + result = ConditionalXactLockTableWait(memxid); + if (!result) + break; + } + else + XactLockTableWait(memxid, rel, ctid, oper); + } + + pfree(members); + } + + if (remaining) + *remaining = remain; + + return result; +} + +/* + * MultiXactIdWait + * Sleep on a MultiXactId. + * + * By the time we finish sleeping, someone else may have changed the Xmax + * of the containing tuple, so the caller needs to iterate on us somehow. + * + * We return (in *remaining, if not NULL) the number of members that are still + * running, including any (non-aborted) subtransactions of our own transaction. + */ +static void +MultiXactIdWait(MultiXactId multi, MultiXactStatus status, uint16 infomask, + Relation rel, ItemPointer ctid, XLTW_Oper oper, + int *remaining) +{ + (void) Do_MultiXactIdWait(multi, status, infomask, false, + rel, ctid, oper, remaining); +} + +/* + * ConditionalMultiXactIdWait + * As above, but only lock if we can get the lock without blocking. + * + * By the time we finish sleeping, someone else may have changed the Xmax + * of the containing tuple, so the caller needs to iterate on us somehow. + * + * If the multixact is now all gone, return true. Returns false if some + * transactions might still be running. + * + * We return (in *remaining, if not NULL) the number of members that are still + * running, including any (non-aborted) subtransactions of our own transaction. + */ +static bool +ConditionalMultiXactIdWait(MultiXactId multi, MultiXactStatus status, + uint16 infomask, Relation rel, int *remaining) +{ + return Do_MultiXactIdWait(multi, status, infomask, true, + rel, NULL, XLTW_None, remaining); +} + +/* + * heap_tuple_needs_eventual_freeze + * + * Check to see whether any of the XID fields of a tuple (xmin, xmax, xvac) + * will eventually require freezing. Similar to heap_tuple_needs_freeze, + * but there's no cutoff, since we're trying to figure out whether freezing + * will ever be needed, not whether it's needed now. + */ +bool +heap_tuple_needs_eventual_freeze(HeapTupleHeader tuple) +{ + TransactionId xid; + + /* + * If xmin is a normal transaction ID, this tuple is definitely not + * frozen. + */ + xid = HeapTupleHeaderGetXmin(tuple); + if (TransactionIdIsNormal(xid)) + return true; + + /* + * If xmax is a valid xact or multixact, this tuple is also not frozen. + */ + if (tuple->t_infomask & HEAP_XMAX_IS_MULTI) + { + MultiXactId multi; + + multi = HeapTupleHeaderGetRawXmax(tuple); + if (MultiXactIdIsValid(multi)) + return true; + } + else + { + xid = HeapTupleHeaderGetRawXmax(tuple); + if (TransactionIdIsNormal(xid)) + return true; + } + + if (tuple->t_infomask & HEAP_MOVED) + { + xid = HeapTupleHeaderGetXvac(tuple); + if (TransactionIdIsNormal(xid)) + return true; + } + + return false; +} + +/* + * heap_tuple_needs_freeze + * + * Check to see whether any of the XID fields of a tuple (xmin, xmax, xvac) + * are older than the specified cutoff XID or MultiXactId. If so, return true. + * + * It doesn't matter whether the tuple is alive or dead, we are checking + * to see if a tuple needs to be removed or frozen to avoid wraparound. + * + * NB: Cannot rely on hint bits here, they might not be set after a crash or + * on a standby. + */ +bool +heap_tuple_needs_freeze(HeapTupleHeader tuple, TransactionId cutoff_xid, + MultiXactId cutoff_multi, Buffer buf) +{ + TransactionId xid; + + xid = HeapTupleHeaderGetXmin(tuple); + if (TransactionIdIsNormal(xid) && + TransactionIdPrecedes(xid, cutoff_xid)) + return true; + + /* + * The considerations for multixacts are complicated; look at + * heap_prepare_freeze_tuple for justifications. This routine had better + * be in sync with that one! + */ + if (tuple->t_infomask & HEAP_XMAX_IS_MULTI) + { + MultiXactId multi; + + multi = HeapTupleHeaderGetRawXmax(tuple); + if (!MultiXactIdIsValid(multi)) + { + /* no xmax set, ignore */ + ; + } + else if (HEAP_LOCKED_UPGRADED(tuple->t_infomask)) + return true; + else if (MultiXactIdPrecedes(multi, cutoff_multi)) + return true; + else + { + MultiXactMember *members; + int nmembers; + int i; + + /* need to check whether any member of the mxact is too old */ + + nmembers = GetMultiXactIdMembers(multi, &members, false, + HEAP_XMAX_IS_LOCKED_ONLY(tuple->t_infomask)); + + for (i = 0; i < nmembers; i++) + { + if (TransactionIdPrecedes(members[i].xid, cutoff_xid)) + { + pfree(members); + return true; + } + } + if (nmembers > 0) + pfree(members); + } + } + else + { + xid = HeapTupleHeaderGetRawXmax(tuple); + if (TransactionIdIsNormal(xid) && + TransactionIdPrecedes(xid, cutoff_xid)) + return true; + } + + if (tuple->t_infomask & HEAP_MOVED) + { + xid = HeapTupleHeaderGetXvac(tuple); + if (TransactionIdIsNormal(xid) && + TransactionIdPrecedes(xid, cutoff_xid)) + return true; + } + + return false; +} + +/* + * If 'tuple' contains any visible XID greater than latestRemovedXid, + * ratchet forwards latestRemovedXid to the greatest one found. + * This is used as the basis for generating Hot Standby conflicts, so + * if a tuple was never visible then removing it should not conflict + * with queries. + */ +void +HeapTupleHeaderAdvanceLatestRemovedXid(HeapTupleHeader tuple, + TransactionId *latestRemovedXid) +{ + TransactionId xmin = HeapTupleHeaderGetXmin(tuple); + TransactionId xmax = HeapTupleHeaderGetUpdateXid(tuple); + TransactionId xvac = HeapTupleHeaderGetXvac(tuple); + + if (tuple->t_infomask & HEAP_MOVED) + { + if (TransactionIdPrecedes(*latestRemovedXid, xvac)) + *latestRemovedXid = xvac; + } + + /* + * Ignore tuples inserted by an aborted transaction or if the tuple was + * updated/deleted by the inserting transaction. + * + * Look for a committed hint bit, or if no xmin bit is set, check clog. + */ + if (HeapTupleHeaderXminCommitted(tuple) || + (!HeapTupleHeaderXminInvalid(tuple) && TransactionIdDidCommit(xmin))) + { + if (xmax != xmin && + TransactionIdFollows(xmax, *latestRemovedXid)) + *latestRemovedXid = xmax; + } + + /* *latestRemovedXid may still be invalid at end */ +} + +#ifdef USE_PREFETCH +/* + * Helper function for heap_index_delete_tuples. Issues prefetch requests for + * prefetch_count buffers. The prefetch_state keeps track of all the buffers + * we can prefetch, and which have already been prefetched; each call to this + * function picks up where the previous call left off. + * + * Note: we expect the deltids array to be sorted in an order that groups TIDs + * by heap block, with all TIDs for each block appearing together in exactly + * one group. + */ +static void +index_delete_prefetch_buffer(Relation rel, + IndexDeletePrefetchState *prefetch_state, + int prefetch_count) +{ + BlockNumber cur_hblkno = prefetch_state->cur_hblkno; + int count = 0; + int i; + int ndeltids = prefetch_state->ndeltids; + TM_IndexDelete *deltids = prefetch_state->deltids; + + for (i = prefetch_state->next_item; + i < ndeltids && count < prefetch_count; + i++) + { + ItemPointer htid = &deltids[i].tid; + + if (cur_hblkno == InvalidBlockNumber || + ItemPointerGetBlockNumber(htid) != cur_hblkno) + { + cur_hblkno = ItemPointerGetBlockNumber(htid); + PrefetchBuffer(rel, MAIN_FORKNUM, cur_hblkno); + count++; + } + } + + /* + * Save the prefetch position so that next time we can continue from that + * position. + */ + prefetch_state->next_item = i; + prefetch_state->cur_hblkno = cur_hblkno; +} +#endif + +/* + * heapam implementation of tableam's index_delete_tuples interface. + * + * This helper function is called by index AMs during index tuple deletion. + * See tableam header comments for an explanation of the interface implemented + * here and a general theory of operation. Note that each call here is either + * a simple index deletion call, or a bottom-up index deletion call. + * + * It's possible for this to generate a fair amount of I/O, since we may be + * deleting hundreds of tuples from a single index block. To amortize that + * cost to some degree, this uses prefetching and combines repeat accesses to + * the same heap block. + */ +TransactionId +heap_index_delete_tuples(Relation rel, TM_IndexDeleteOp *delstate) +{ + /* Initial assumption is that earlier pruning took care of conflict */ + TransactionId latestRemovedXid = InvalidTransactionId; + BlockNumber blkno = InvalidBlockNumber; + Buffer buf = InvalidBuffer; + Page page = NULL; + OffsetNumber maxoff = InvalidOffsetNumber; + TransactionId priorXmax; +#ifdef USE_PREFETCH + IndexDeletePrefetchState prefetch_state; + int prefetch_distance; +#endif + SnapshotData SnapshotNonVacuumable; + int finalndeltids = 0, + nblocksaccessed = 0; + + /* State that's only used in bottom-up index deletion case */ + int nblocksfavorable = 0; + int curtargetfreespace = delstate->bottomupfreespace, + lastfreespace = 0, + actualfreespace = 0; + bool bottomup_final_block = false; + + InitNonVacuumableSnapshot(SnapshotNonVacuumable, GlobalVisTestFor(rel)); + + /* Sort caller's deltids array by TID for further processing */ + index_delete_sort(delstate); + + /* + * Bottom-up case: resort deltids array in an order attuned to where the + * greatest number of promising TIDs are to be found, and determine how + * many blocks from the start of sorted array should be considered + * favorable. This will also shrink the deltids array in order to + * eliminate completely unfavorable blocks up front. + */ + if (delstate->bottomup) + nblocksfavorable = bottomup_sort_and_shrink(delstate); + +#ifdef USE_PREFETCH + /* Initialize prefetch state. */ + prefetch_state.cur_hblkno = InvalidBlockNumber; + prefetch_state.next_item = 0; + prefetch_state.ndeltids = delstate->ndeltids; + prefetch_state.deltids = delstate->deltids; + + /* + * Determine the prefetch distance that we will attempt to maintain. + * + * Since the caller holds a buffer lock somewhere in rel, we'd better make + * sure that isn't a catalog relation before we call code that does + * syscache lookups, to avoid risk of deadlock. + */ + if (IsCatalogRelation(rel)) + prefetch_distance = maintenance_io_concurrency; + else + prefetch_distance = + get_tablespace_maintenance_io_concurrency(rel->rd_rel->reltablespace); + + /* Cap initial prefetch distance for bottom-up deletion caller */ + if (delstate->bottomup) + { + Assert(nblocksfavorable >= 1); + Assert(nblocksfavorable <= BOTTOMUP_MAX_NBLOCKS); + prefetch_distance = Min(prefetch_distance, nblocksfavorable); + } + + /* Start prefetching. */ + index_delete_prefetch_buffer(rel, &prefetch_state, prefetch_distance); +#endif + + /* Iterate over deltids, determine which to delete, check their horizon */ + Assert(delstate->ndeltids > 0); + for (int i = 0; i < delstate->ndeltids; i++) + { + TM_IndexDelete *ideltid = &delstate->deltids[i]; + TM_IndexStatus *istatus = delstate->status + ideltid->id; + ItemPointer htid = &ideltid->tid; + OffsetNumber offnum; + + /* + * Read buffer, and perform required extra steps each time a new block + * is encountered. Avoid refetching if it's the same block as the one + * from the last htid. + */ + if (blkno == InvalidBlockNumber || + ItemPointerGetBlockNumber(htid) != blkno) + { + /* + * Consider giving up early for bottom-up index deletion caller + * first. (Only prefetch next-next block afterwards, when it + * becomes clear that we're at least going to access the next + * block in line.) + * + * Sometimes the first block frees so much space for bottom-up + * caller that the deletion process can end without accessing any + * more blocks. It is usually necessary to access 2 or 3 blocks + * per bottom-up deletion operation, though. + */ + if (delstate->bottomup) + { + /* + * We often allow caller to delete a few additional items + * whose entries we reached after the point that space target + * from caller was satisfied. The cost of accessing the page + * was already paid at that point, so it made sense to finish + * it off. When that happened, we finalize everything here + * (by finishing off the whole bottom-up deletion operation + * without needlessly paying the cost of accessing any more + * blocks). + */ + if (bottomup_final_block) + break; + + /* + * Give up when we didn't enable our caller to free any + * additional space as a result of processing the page that we + * just finished up with. This rule is the main way in which + * we keep the cost of bottom-up deletion under control. + */ + if (nblocksaccessed >= 1 && actualfreespace == lastfreespace) + break; + lastfreespace = actualfreespace; /* for next time */ + + /* + * Deletion operation (which is bottom-up) will definitely + * access the next block in line. Prepare for that now. + * + * Decay target free space so that we don't hang on for too + * long with a marginal case. (Space target is only truly + * helpful when it allows us to recognize that we don't need + * to access more than 1 or 2 blocks to satisfy caller due to + * agreeable workload characteristics.) + * + * We are a bit more patient when we encounter contiguous + * blocks, though: these are treated as favorable blocks. The + * decay process is only applied when the next block in line + * is not a favorable/contiguous block. This is not an + * exception to the general rule; we still insist on finding + * at least one deletable item per block accessed. See + * bottomup_nblocksfavorable() for full details of the theory + * behind favorable blocks and heap block locality in general. + * + * Note: The first block in line is always treated as a + * favorable block, so the earliest possible point that the + * decay can be applied is just before we access the second + * block in line. The Assert() verifies this for us. + */ + Assert(nblocksaccessed > 0 || nblocksfavorable > 0); + if (nblocksfavorable > 0) + nblocksfavorable--; + else + curtargetfreespace /= 2; + } + + /* release old buffer */ + if (BufferIsValid(buf)) + UnlockReleaseBuffer(buf); + + blkno = ItemPointerGetBlockNumber(htid); + buf = ReadBuffer(rel, blkno); + nblocksaccessed++; + Assert(!delstate->bottomup || + nblocksaccessed <= BOTTOMUP_MAX_NBLOCKS); + +#ifdef USE_PREFETCH + + /* + * To maintain the prefetch distance, prefetch one more page for + * each page we read. + */ + index_delete_prefetch_buffer(rel, &prefetch_state, 1); +#endif + + LockBuffer(buf, BUFFER_LOCK_SHARE); + + page = BufferGetPage(buf); + maxoff = PageGetMaxOffsetNumber(page); + } + + if (istatus->knowndeletable) + Assert(!delstate->bottomup && !istatus->promising); + else + { + ItemPointerData tmp = *htid; + HeapTupleData heapTuple; + + /* Are any tuples from this HOT chain non-vacuumable? */ + if (heap_hot_search_buffer(&tmp, rel, buf, &SnapshotNonVacuumable, + &heapTuple, NULL, true)) + continue; /* can't delete entry */ + + /* Caller will delete, since whole HOT chain is vacuumable */ + istatus->knowndeletable = true; + + /* Maintain index free space info for bottom-up deletion case */ + if (delstate->bottomup) + { + Assert(istatus->freespace > 0); + actualfreespace += istatus->freespace; + if (actualfreespace >= curtargetfreespace) + bottomup_final_block = true; + } + } + + /* + * Maintain latestRemovedXid value for deletion operation as a whole + * by advancing current value using heap tuple headers. This is + * loosely based on the logic for pruning a HOT chain. + */ + offnum = ItemPointerGetOffsetNumber(htid); + priorXmax = InvalidTransactionId; /* cannot check first XMIN */ + for (;;) + { + ItemId lp; + HeapTupleHeader htup; + + /* Some sanity checks */ + if (offnum < FirstOffsetNumber || offnum > maxoff) + break; + + lp = PageGetItemId(page, offnum); + if (ItemIdIsRedirected(lp)) + { + offnum = ItemIdGetRedirect(lp); + continue; + } + + /* + * We'll often encounter LP_DEAD line pointers (especially with an + * entry marked knowndeletable by our caller up front). No heap + * tuple headers get examined for an htid that leads us to an + * LP_DEAD item. This is okay because the earlier pruning + * operation that made the line pointer LP_DEAD in the first place + * must have considered the original tuple header as part of + * generating its own latestRemovedXid value. + * + * Relying on XLOG_HEAP2_PRUNE records like this is the same + * strategy that index vacuuming uses in all cases. Index VACUUM + * WAL records don't even have a latestRemovedXid field of their + * own for this reason. + */ + if (!ItemIdIsNormal(lp)) + break; + + htup = (HeapTupleHeader) PageGetItem(page, lp); + + /* + * Check the tuple XMIN against prior XMAX, if any + */ + if (TransactionIdIsValid(priorXmax) && + !TransactionIdEquals(HeapTupleHeaderGetXmin(htup), priorXmax)) + break; + + HeapTupleHeaderAdvanceLatestRemovedXid(htup, &latestRemovedXid); + + /* + * If the tuple is not HOT-updated, then we are at the end of this + * HOT-chain. No need to visit later tuples from the same update + * chain (they get their own index entries) -- just move on to + * next htid from index AM caller. + */ + if (!HeapTupleHeaderIsHotUpdated(htup)) + break; + + /* Advance to next HOT chain member */ + Assert(ItemPointerGetBlockNumber(&htup->t_ctid) == blkno); + offnum = ItemPointerGetOffsetNumber(&htup->t_ctid); + priorXmax = HeapTupleHeaderGetUpdateXid(htup); + } + + /* Enable further/final shrinking of deltids for caller */ + finalndeltids = i + 1; + } + + UnlockReleaseBuffer(buf); + + /* + * Shrink deltids array to exclude non-deletable entries at the end. This + * is not just a minor optimization. Final deltids array size might be + * zero for a bottom-up caller. Index AM is explicitly allowed to rely on + * ndeltids being zero in all cases with zero total deletable entries. + */ + Assert(finalndeltids > 0 || delstate->bottomup); + delstate->ndeltids = finalndeltids; + + return latestRemovedXid; +} + +/* + * Specialized inlineable comparison function for index_delete_sort() + */ +static inline int +index_delete_sort_cmp(TM_IndexDelete *deltid1, TM_IndexDelete *deltid2) +{ + ItemPointer tid1 = &deltid1->tid; + ItemPointer tid2 = &deltid2->tid; + + { + BlockNumber blk1 = ItemPointerGetBlockNumber(tid1); + BlockNumber blk2 = ItemPointerGetBlockNumber(tid2); + + if (blk1 != blk2) + return (blk1 < blk2) ? -1 : 1; + } + { + OffsetNumber pos1 = ItemPointerGetOffsetNumber(tid1); + OffsetNumber pos2 = ItemPointerGetOffsetNumber(tid2); + + if (pos1 != pos2) + return (pos1 < pos2) ? -1 : 1; + } + + Assert(false); + + return 0; +} + +/* + * Sort deltids array from delstate by TID. This prepares it for further + * processing by heap_index_delete_tuples(). + * + * This operation becomes a noticeable consumer of CPU cycles with some + * workloads, so we go to the trouble of specialization/micro optimization. + * We use shellsort for this because it's easy to specialize, compiles to + * relatively few instructions, and is adaptive to presorted inputs/subsets + * (which are typical here). + */ +static void +index_delete_sort(TM_IndexDeleteOp *delstate) +{ + TM_IndexDelete *deltids = delstate->deltids; + int ndeltids = delstate->ndeltids; + int low = 0; + + /* + * Shellsort gap sequence (taken from Sedgewick-Incerpi paper). + * + * This implementation is fast with array sizes up to ~4500. This covers + * all supported BLCKSZ values. + */ + const int gaps[9] = {1968, 861, 336, 112, 48, 21, 7, 3, 1}; + + /* Think carefully before changing anything here -- keep swaps cheap */ + StaticAssertStmt(sizeof(TM_IndexDelete) <= 8, + "element size exceeds 8 bytes"); + + for (int g = 0; g < lengthof(gaps); g++) + { + for (int hi = gaps[g], i = low + hi; i < ndeltids; i++) + { + TM_IndexDelete d = deltids[i]; + int j = i; + + while (j >= hi && index_delete_sort_cmp(&deltids[j - hi], &d) >= 0) + { + deltids[j] = deltids[j - hi]; + j -= hi; + } + deltids[j] = d; + } + } +} + +/* + * Returns how many blocks should be considered favorable/contiguous for a + * bottom-up index deletion pass. This is a number of heap blocks that starts + * from and includes the first block in line. + * + * There is always at least one favorable block during bottom-up index + * deletion. In the worst case (i.e. with totally random heap blocks) the + * first block in line (the only favorable block) can be thought of as a + * degenerate array of contiguous blocks that consists of a single block. + * heap_index_delete_tuples() will expect this. + * + * Caller passes blockgroups, a description of the final order that deltids + * will be sorted in for heap_index_delete_tuples() bottom-up index deletion + * processing. Note that deltids need not actually be sorted just yet (caller + * only passes deltids to us so that we can interpret blockgroups). + * + * You might guess that the existence of contiguous blocks cannot matter much, + * since in general the main factor that determines which blocks we visit is + * the number of promising TIDs, which is a fixed hint from the index AM. + * We're not really targeting the general case, though -- the actual goal is + * to adapt our behavior to a wide variety of naturally occurring conditions. + * The effects of most of the heuristics we apply are only noticeable in the + * aggregate, over time and across many _related_ bottom-up index deletion + * passes. + * + * Deeming certain blocks favorable allows heapam to recognize and adapt to + * workloads where heap blocks visited during bottom-up index deletion can be + * accessed contiguously, in the sense that each newly visited block is the + * neighbor of the block that bottom-up deletion just finished processing (or + * close enough to it). It will likely be cheaper to access more favorable + * blocks sooner rather than later (e.g. in this pass, not across a series of + * related bottom-up passes). Either way it is probably only a matter of time + * (or a matter of further correlated version churn) before all blocks that + * appear together as a single large batch of favorable blocks get accessed by + * _some_ bottom-up pass. Large batches of favorable blocks tend to either + * appear almost constantly or not even once (it all depends on per-index + * workload characteristics). + * + * Note that the blockgroups sort order applies a power-of-two bucketing + * scheme that creates opportunities for contiguous groups of blocks to get + * batched together, at least with workloads that are naturally amenable to + * being driven by heap block locality. This doesn't just enhance the spatial + * locality of bottom-up heap block processing in the obvious way. It also + * enables temporal locality of access, since sorting by heap block number + * naturally tends to make the bottom-up processing order deterministic. + * + * Consider the following example to get a sense of how temporal locality + * might matter: There is a heap relation with several indexes, each of which + * is low to medium cardinality. It is subject to constant non-HOT updates. + * The updates are skewed (in one part of the primary key, perhaps). None of + * the indexes are logically modified by the UPDATE statements (if they were + * then bottom-up index deletion would not be triggered in the first place). + * Naturally, each new round of index tuples (for each heap tuple that gets a + * heap_update() call) will have the same heap TID in each and every index. + * Since these indexes are low cardinality and never get logically modified, + * heapam processing during bottom-up deletion passes will access heap blocks + * in approximately sequential order. Temporal locality of access occurs due + * to bottom-up deletion passes behaving very similarly across each of the + * indexes at any given moment. This keeps the number of buffer misses needed + * to visit heap blocks to a minimum. + */ +static int +bottomup_nblocksfavorable(IndexDeleteCounts *blockgroups, int nblockgroups, + TM_IndexDelete *deltids) +{ + int64 lastblock = -1; + int nblocksfavorable = 0; + + Assert(nblockgroups >= 1); + Assert(nblockgroups <= BOTTOMUP_MAX_NBLOCKS); + + /* + * We tolerate heap blocks that will be accessed only slightly out of + * physical order. Small blips occur when a pair of almost-contiguous + * blocks happen to fall into different buckets (perhaps due only to a + * small difference in npromisingtids that the bucketing scheme didn't + * quite manage to ignore). We effectively ignore these blips by applying + * a small tolerance. The precise tolerance we use is a little arbitrary, + * but it works well enough in practice. + */ + for (int b = 0; b < nblockgroups; b++) + { + IndexDeleteCounts *group = blockgroups + b; + TM_IndexDelete *firstdtid = deltids + group->ifirsttid; + BlockNumber block = ItemPointerGetBlockNumber(&firstdtid->tid); + + if (lastblock != -1 && + ((int64) block < lastblock - BOTTOMUP_TOLERANCE_NBLOCKS || + (int64) block > lastblock + BOTTOMUP_TOLERANCE_NBLOCKS)) + break; + + nblocksfavorable++; + lastblock = block; + } + + /* Always indicate that there is at least 1 favorable block */ + Assert(nblocksfavorable >= 1); + + return nblocksfavorable; +} + +/* + * qsort comparison function for bottomup_sort_and_shrink() + */ +static int +bottomup_sort_and_shrink_cmp(const void *arg1, const void *arg2) +{ + const IndexDeleteCounts *group1 = (const IndexDeleteCounts *) arg1; + const IndexDeleteCounts *group2 = (const IndexDeleteCounts *) arg2; + + /* + * Most significant field is npromisingtids (which we invert the order of + * so as to sort in desc order). + * + * Caller should have already normalized npromisingtids fields into + * power-of-two values (buckets). + */ + if (group1->npromisingtids > group2->npromisingtids) + return -1; + if (group1->npromisingtids < group2->npromisingtids) + return 1; + + /* + * Tiebreak: desc ntids sort order. + * + * We cannot expect power-of-two values for ntids fields. We should + * behave as if they were already rounded up for us instead. + */ + if (group1->ntids != group2->ntids) + { + uint32 ntids1 = pg_nextpower2_32((uint32) group1->ntids); + uint32 ntids2 = pg_nextpower2_32((uint32) group2->ntids); + + if (ntids1 > ntids2) + return -1; + if (ntids1 < ntids2) + return 1; + } + + /* + * Tiebreak: asc offset-into-deltids-for-block (offset to first TID for + * block in deltids array) order. + * + * This is equivalent to sorting in ascending heap block number order + * (among otherwise equal subsets of the array). This approach allows us + * to avoid accessing the out-of-line TID. (We rely on the assumption + * that the deltids array was sorted in ascending heap TID order when + * these offsets to the first TID from each heap block group were formed.) + */ + if (group1->ifirsttid > group2->ifirsttid) + return 1; + if (group1->ifirsttid < group2->ifirsttid) + return -1; + + pg_unreachable(); + + return 0; +} + +/* + * heap_index_delete_tuples() helper function for bottom-up deletion callers. + * + * Sorts deltids array in the order needed for useful processing by bottom-up + * deletion. The array should already be sorted in TID order when we're + * called. The sort process groups heap TIDs from deltids into heap block + * groupings. Earlier/more-promising groups/blocks are usually those that are + * known to have the most "promising" TIDs. + * + * Sets new size of deltids array (ndeltids) in state. deltids will only have + * TIDs from the BOTTOMUP_MAX_NBLOCKS most promising heap blocks when we + * return. This often means that deltids will be shrunk to a small fraction + * of its original size (we eliminate many heap blocks from consideration for + * caller up front). + * + * Returns the number of "favorable" blocks. See bottomup_nblocksfavorable() + * for a definition and full details. + */ +static int +bottomup_sort_and_shrink(TM_IndexDeleteOp *delstate) +{ + IndexDeleteCounts *blockgroups; + TM_IndexDelete *reordereddeltids; + BlockNumber curblock = InvalidBlockNumber; + int nblockgroups = 0; + int ncopied = 0; + int nblocksfavorable = 0; + + Assert(delstate->bottomup); + Assert(delstate->ndeltids > 0); + + /* Calculate per-heap-block count of TIDs */ + blockgroups = palloc(sizeof(IndexDeleteCounts) * delstate->ndeltids); + for (int i = 0; i < delstate->ndeltids; i++) + { + TM_IndexDelete *ideltid = &delstate->deltids[i]; + TM_IndexStatus *istatus = delstate->status + ideltid->id; + ItemPointer htid = &ideltid->tid; + bool promising = istatus->promising; + + if (curblock != ItemPointerGetBlockNumber(htid)) + { + /* New block group */ + nblockgroups++; + + Assert(curblock < ItemPointerGetBlockNumber(htid) || + !BlockNumberIsValid(curblock)); + + curblock = ItemPointerGetBlockNumber(htid); + blockgroups[nblockgroups - 1].ifirsttid = i; + blockgroups[nblockgroups - 1].ntids = 1; + blockgroups[nblockgroups - 1].npromisingtids = 0; + } + else + { + blockgroups[nblockgroups - 1].ntids++; + } + + if (promising) + blockgroups[nblockgroups - 1].npromisingtids++; + } + + /* + * We're about ready to sort block groups to determine the optimal order + * for visiting heap blocks. But before we do, round the number of + * promising tuples for each block group up to the next power-of-two, + * unless it is very low (less than 4), in which case we round up to 4. + * npromisingtids is far too noisy to trust when choosing between a pair + * of block groups that both have very low values. + * + * This scheme divides heap blocks/block groups into buckets. Each bucket + * contains blocks that have _approximately_ the same number of promising + * TIDs as each other. The goal is to ignore relatively small differences + * in the total number of promising entries, so that the whole process can + * give a little weight to heapam factors (like heap block locality) + * instead. This isn't a trade-off, really -- we have nothing to lose. It + * would be foolish to interpret small differences in npromisingtids + * values as anything more than noise. + * + * We tiebreak on nhtids when sorting block group subsets that have the + * same npromisingtids, but this has the same issues as npromisingtids, + * and so nhtids is subject to the same power-of-two bucketing scheme. The + * only reason that we don't fix nhtids in the same way here too is that + * we'll need accurate nhtids values after the sort. We handle nhtids + * bucketization dynamically instead (in the sort comparator). + * + * See bottomup_nblocksfavorable() for a full explanation of when and how + * heap locality/favorable blocks can significantly influence when and how + * heap blocks are accessed. + */ + for (int b = 0; b < nblockgroups; b++) + { + IndexDeleteCounts *group = blockgroups + b; + + /* Better off falling back on nhtids with low npromisingtids */ + if (group->npromisingtids <= 4) + group->npromisingtids = 4; + else + group->npromisingtids = + pg_nextpower2_32((uint32) group->npromisingtids); + } + + /* Sort groups and rearrange caller's deltids array */ + qsort(blockgroups, nblockgroups, sizeof(IndexDeleteCounts), + bottomup_sort_and_shrink_cmp); + reordereddeltids = palloc(delstate->ndeltids * sizeof(TM_IndexDelete)); + + nblockgroups = Min(BOTTOMUP_MAX_NBLOCKS, nblockgroups); + /* Determine number of favorable blocks at the start of final deltids */ + nblocksfavorable = bottomup_nblocksfavorable(blockgroups, nblockgroups, + delstate->deltids); + + for (int b = 0; b < nblockgroups; b++) + { + IndexDeleteCounts *group = blockgroups + b; + TM_IndexDelete *firstdtid = delstate->deltids + group->ifirsttid; + + memcpy(reordereddeltids + ncopied, firstdtid, + sizeof(TM_IndexDelete) * group->ntids); + ncopied += group->ntids; + } + + /* Copy final grouped and sorted TIDs back into start of caller's array */ + memcpy(delstate->deltids, reordereddeltids, + sizeof(TM_IndexDelete) * ncopied); + delstate->ndeltids = ncopied; + + pfree(reordereddeltids); + pfree(blockgroups); + + return nblocksfavorable; +} + +/* + * Perform XLogInsert for a heap-freeze operation. Caller must have already + * modified the buffer and marked it dirty. + */ +XLogRecPtr +log_heap_freeze(Relation reln, Buffer buffer, TransactionId cutoff_xid, + xl_heap_freeze_tuple *tuples, int ntuples) +{ + xl_heap_freeze_page xlrec; + XLogRecPtr recptr; + + /* Caller should not call me on a non-WAL-logged relation */ + Assert(RelationNeedsWAL(reln)); + /* nor when there are no tuples to freeze */ + Assert(ntuples > 0); + + xlrec.cutoff_xid = cutoff_xid; + xlrec.ntuples = ntuples; + + XLogBeginInsert(); + XLogRegisterData((char *) &xlrec, SizeOfHeapFreezePage); + + /* + * The freeze plan array is not actually in the buffer, but pretend that + * it is. When XLogInsert stores the whole buffer, the freeze plan need + * not be stored too. + */ + XLogRegisterBuffer(0, buffer, REGBUF_STANDARD); + XLogRegisterBufData(0, (char *) tuples, + ntuples * sizeof(xl_heap_freeze_tuple)); + + recptr = XLogInsert(RM_HEAP2_ID, XLOG_HEAP2_FREEZE_PAGE); + + return recptr; +} + +/* + * Perform XLogInsert for a heap-visible operation. 'block' is the block + * being marked all-visible, and vm_buffer is the buffer containing the + * corresponding visibility map block. Both should have already been modified + * and dirtied. + * + * If checksums are enabled, we also generate a full-page image of + * heap_buffer, if necessary. + */ +XLogRecPtr +log_heap_visible(RelFileNode rnode, Buffer heap_buffer, Buffer vm_buffer, + TransactionId cutoff_xid, uint8 vmflags) +{ + xl_heap_visible xlrec; + XLogRecPtr recptr; + uint8 flags; + + Assert(BufferIsValid(heap_buffer)); + Assert(BufferIsValid(vm_buffer)); + + xlrec.cutoff_xid = cutoff_xid; + xlrec.flags = vmflags; + XLogBeginInsert(); + XLogRegisterData((char *) &xlrec, SizeOfHeapVisible); + + XLogRegisterBuffer(0, vm_buffer, 0); + + flags = REGBUF_STANDARD; + if (!XLogHintBitIsNeeded()) + flags |= REGBUF_NO_IMAGE; + XLogRegisterBuffer(1, heap_buffer, flags); + + recptr = XLogInsert(RM_HEAP2_ID, XLOG_HEAP2_VISIBLE); + + return recptr; +} + +/* + * Perform XLogInsert for a heap-update operation. Caller must already + * have modified the buffer(s) and marked them dirty. + */ +static XLogRecPtr +log_heap_update(Relation reln, Buffer oldbuf, + Buffer newbuf, HeapTuple oldtup, HeapTuple newtup, + HeapTuple old_key_tuple, + bool all_visible_cleared, bool new_all_visible_cleared) +{ + xl_heap_update xlrec; + xl_heap_header xlhdr; + xl_heap_header xlhdr_idx; + uint8 info; + uint16 prefix_suffix[2]; + uint16 prefixlen = 0, + suffixlen = 0; + XLogRecPtr recptr; + Page page = BufferGetPage(newbuf); + bool need_tuple_data = RelationIsLogicallyLogged(reln); + bool init; + int bufflags; + + /* Caller should not call me on a non-WAL-logged relation */ + Assert(RelationNeedsWAL(reln)); + + XLogBeginInsert(); + + if (HeapTupleIsHeapOnly(newtup)) + info = XLOG_HEAP_HOT_UPDATE; + else + info = XLOG_HEAP_UPDATE; + + /* + * If the old and new tuple are on the same page, we only need to log the + * parts of the new tuple that were changed. That saves on the amount of + * WAL we need to write. Currently, we just count any unchanged bytes in + * the beginning and end of the tuple. That's quick to check, and + * perfectly covers the common case that only one field is updated. + * + * We could do this even if the old and new tuple are on different pages, + * but only if we don't make a full-page image of the old page, which is + * difficult to know in advance. Also, if the old tuple is corrupt for + * some reason, it would allow the corruption to propagate the new page, + * so it seems best to avoid. Under the general assumption that most + * updates tend to create the new tuple version on the same page, there + * isn't much to be gained by doing this across pages anyway. + * + * Skip this if we're taking a full-page image of the new page, as we + * don't include the new tuple in the WAL record in that case. Also + * disable if wal_level='logical', as logical decoding needs to be able to + * read the new tuple in whole from the WAL record alone. + */ + if (oldbuf == newbuf && !need_tuple_data && + !XLogCheckBufferNeedsBackup(newbuf)) + { + char *oldp = (char *) oldtup->t_data + oldtup->t_data->t_hoff; + char *newp = (char *) newtup->t_data + newtup->t_data->t_hoff; + int oldlen = oldtup->t_len - oldtup->t_data->t_hoff; + int newlen = newtup->t_len - newtup->t_data->t_hoff; + + /* Check for common prefix between old and new tuple */ + for (prefixlen = 0; prefixlen < Min(oldlen, newlen); prefixlen++) + { + if (newp[prefixlen] != oldp[prefixlen]) + break; + } + + /* + * Storing the length of the prefix takes 2 bytes, so we need to save + * at least 3 bytes or there's no point. + */ + if (prefixlen < 3) + prefixlen = 0; + + /* Same for suffix */ + for (suffixlen = 0; suffixlen < Min(oldlen, newlen) - prefixlen; suffixlen++) + { + if (newp[newlen - suffixlen - 1] != oldp[oldlen - suffixlen - 1]) + break; + } + if (suffixlen < 3) + suffixlen = 0; + } + + /* Prepare main WAL data chain */ + xlrec.flags = 0; + if (all_visible_cleared) + xlrec.flags |= XLH_UPDATE_OLD_ALL_VISIBLE_CLEARED; + if (new_all_visible_cleared) + xlrec.flags |= XLH_UPDATE_NEW_ALL_VISIBLE_CLEARED; + if (prefixlen > 0) + xlrec.flags |= XLH_UPDATE_PREFIX_FROM_OLD; + if (suffixlen > 0) + xlrec.flags |= XLH_UPDATE_SUFFIX_FROM_OLD; + if (need_tuple_data) + { + xlrec.flags |= XLH_UPDATE_CONTAINS_NEW_TUPLE; + if (old_key_tuple) + { + if (reln->rd_rel->relreplident == REPLICA_IDENTITY_FULL) + xlrec.flags |= XLH_UPDATE_CONTAINS_OLD_TUPLE; + else + xlrec.flags |= XLH_UPDATE_CONTAINS_OLD_KEY; + } + } + + /* If new tuple is the single and first tuple on page... */ + if (ItemPointerGetOffsetNumber(&(newtup->t_self)) == FirstOffsetNumber && + PageGetMaxOffsetNumber(page) == FirstOffsetNumber) + { + info |= XLOG_HEAP_INIT_PAGE; + init = true; + } + else + init = false; + + /* Prepare WAL data for the old page */ + xlrec.old_offnum = ItemPointerGetOffsetNumber(&oldtup->t_self); + xlrec.old_xmax = HeapTupleHeaderGetRawXmax(oldtup->t_data); + xlrec.old_infobits_set = compute_infobits(oldtup->t_data->t_infomask, + oldtup->t_data->t_infomask2); + + /* Prepare WAL data for the new page */ + xlrec.new_offnum = ItemPointerGetOffsetNumber(&newtup->t_self); + xlrec.new_xmax = HeapTupleHeaderGetRawXmax(newtup->t_data); + + bufflags = REGBUF_STANDARD; + if (init) + bufflags |= REGBUF_WILL_INIT; + if (need_tuple_data) + bufflags |= REGBUF_KEEP_DATA; + + XLogRegisterBuffer(0, newbuf, bufflags); + if (oldbuf != newbuf) + XLogRegisterBuffer(1, oldbuf, REGBUF_STANDARD); + + XLogRegisterData((char *) &xlrec, SizeOfHeapUpdate); + + /* + * Prepare WAL data for the new tuple. + */ + if (prefixlen > 0 || suffixlen > 0) + { + if (prefixlen > 0 && suffixlen > 0) + { + prefix_suffix[0] = prefixlen; + prefix_suffix[1] = suffixlen; + XLogRegisterBufData(0, (char *) &prefix_suffix, sizeof(uint16) * 2); + } + else if (prefixlen > 0) + { + XLogRegisterBufData(0, (char *) &prefixlen, sizeof(uint16)); + } + else + { + XLogRegisterBufData(0, (char *) &suffixlen, sizeof(uint16)); + } + } + + xlhdr.t_infomask2 = newtup->t_data->t_infomask2; + xlhdr.t_infomask = newtup->t_data->t_infomask; + xlhdr.t_hoff = newtup->t_data->t_hoff; + Assert(SizeofHeapTupleHeader + prefixlen + suffixlen <= newtup->t_len); + + /* + * PG73FORMAT: write bitmap [+ padding] [+ oid] + data + * + * The 'data' doesn't include the common prefix or suffix. + */ + XLogRegisterBufData(0, (char *) &xlhdr, SizeOfHeapHeader); + if (prefixlen == 0) + { + XLogRegisterBufData(0, + ((char *) newtup->t_data) + SizeofHeapTupleHeader, + newtup->t_len - SizeofHeapTupleHeader - suffixlen); + } + else + { + /* + * Have to write the null bitmap and data after the common prefix as + * two separate rdata entries. + */ + /* bitmap [+ padding] [+ oid] */ + if (newtup->t_data->t_hoff - SizeofHeapTupleHeader > 0) + { + XLogRegisterBufData(0, + ((char *) newtup->t_data) + SizeofHeapTupleHeader, + newtup->t_data->t_hoff - SizeofHeapTupleHeader); + } + + /* data after common prefix */ + XLogRegisterBufData(0, + ((char *) newtup->t_data) + newtup->t_data->t_hoff + prefixlen, + newtup->t_len - newtup->t_data->t_hoff - prefixlen - suffixlen); + } + + /* We need to log a tuple identity */ + if (need_tuple_data && old_key_tuple) + { + /* don't really need this, but its more comfy to decode */ + xlhdr_idx.t_infomask2 = old_key_tuple->t_data->t_infomask2; + xlhdr_idx.t_infomask = old_key_tuple->t_data->t_infomask; + xlhdr_idx.t_hoff = old_key_tuple->t_data->t_hoff; + + XLogRegisterData((char *) &xlhdr_idx, SizeOfHeapHeader); + + /* PG73FORMAT: write bitmap [+ padding] [+ oid] + data */ + XLogRegisterData((char *) old_key_tuple->t_data + SizeofHeapTupleHeader, + old_key_tuple->t_len - SizeofHeapTupleHeader); + } + + /* filtering by origin on a row level is much more efficient */ + XLogSetRecordFlags(XLOG_INCLUDE_ORIGIN); + + recptr = XLogInsert(RM_HEAP_ID, info); + + return recptr; +} + +/* + * Perform XLogInsert of an XLOG_HEAP2_NEW_CID record + * + * This is only used in wal_level >= WAL_LEVEL_LOGICAL, and only for catalog + * tuples. + */ +static XLogRecPtr +log_heap_new_cid(Relation relation, HeapTuple tup) +{ + xl_heap_new_cid xlrec; + + XLogRecPtr recptr; + HeapTupleHeader hdr = tup->t_data; + + Assert(ItemPointerIsValid(&tup->t_self)); + Assert(tup->t_tableOid != InvalidOid); + + xlrec.top_xid = GetTopTransactionId(); + xlrec.target_node = relation->rd_node; + xlrec.target_tid = tup->t_self; + + /* + * If the tuple got inserted & deleted in the same TX we definitely have a + * combo CID, set cmin and cmax. + */ + if (hdr->t_infomask & HEAP_COMBOCID) + { + Assert(!(hdr->t_infomask & HEAP_XMAX_INVALID)); + Assert(!HeapTupleHeaderXminInvalid(hdr)); + xlrec.cmin = HeapTupleHeaderGetCmin(hdr); + xlrec.cmax = HeapTupleHeaderGetCmax(hdr); + xlrec.combocid = HeapTupleHeaderGetRawCommandId(hdr); + } + /* No combo CID, so only cmin or cmax can be set by this TX */ + else + { + /* + * Tuple inserted. + * + * We need to check for LOCK ONLY because multixacts might be + * transferred to the new tuple in case of FOR KEY SHARE updates in + * which case there will be an xmax, although the tuple just got + * inserted. + */ + if (hdr->t_infomask & HEAP_XMAX_INVALID || + HEAP_XMAX_IS_LOCKED_ONLY(hdr->t_infomask)) + { + xlrec.cmin = HeapTupleHeaderGetRawCommandId(hdr); + xlrec.cmax = InvalidCommandId; + } + /* Tuple from a different tx updated or deleted. */ + else + { + xlrec.cmin = InvalidCommandId; + xlrec.cmax = HeapTupleHeaderGetRawCommandId(hdr); + + } + xlrec.combocid = InvalidCommandId; + } + + /* + * Note that we don't need to register the buffer here, because this + * operation does not modify the page. The insert/update/delete that + * called us certainly did, but that's WAL-logged separately. + */ + XLogBeginInsert(); + XLogRegisterData((char *) &xlrec, SizeOfHeapNewCid); + + /* will be looked at irrespective of origin */ + + recptr = XLogInsert(RM_HEAP2_ID, XLOG_HEAP2_NEW_CID); + + return recptr; +} + +/* + * Build a heap tuple representing the configured REPLICA IDENTITY to represent + * the old tuple in a UPDATE or DELETE. + * + * Returns NULL if there's no need to log an identity or if there's no suitable + * key defined. + * + * Pass key_required true if any replica identity columns changed value, or if + * any of them have any external data. Delete must always pass true. + * + * *copy is set to true if the returned tuple is a modified copy rather than + * the same tuple that was passed in. + */ +static HeapTuple +ExtractReplicaIdentity(Relation relation, HeapTuple tp, bool key_required, + bool *copy) +{ + TupleDesc desc = RelationGetDescr(relation); + char replident = relation->rd_rel->relreplident; + Bitmapset *idattrs; + HeapTuple key_tuple; + bool nulls[MaxHeapAttributeNumber]; + Datum values[MaxHeapAttributeNumber]; + + *copy = false; + + if (!RelationIsLogicallyLogged(relation)) + return NULL; + + if (replident == REPLICA_IDENTITY_NOTHING) + return NULL; + + if (replident == REPLICA_IDENTITY_FULL) + { + /* + * When logging the entire old tuple, it very well could contain + * toasted columns. If so, force them to be inlined. + */ + if (HeapTupleHasExternal(tp)) + { + *copy = true; + tp = toast_flatten_tuple(tp, desc); + } + return tp; + } + + /* if the key isn't required and we're only logging the key, we're done */ + if (!key_required) + return NULL; + + /* find out the replica identity columns */ + idattrs = RelationGetIndexAttrBitmap(relation, + INDEX_ATTR_BITMAP_IDENTITY_KEY); + + /* + * If there's no defined replica identity columns, treat as !key_required. + * (This case should not be reachable from heap_update, since that should + * calculate key_required accurately. But heap_delete just passes + * constant true for key_required, so we can hit this case in deletes.) + */ + if (bms_is_empty(idattrs)) + return NULL; + + /* + * Construct a new tuple containing only the replica identity columns, + * with nulls elsewhere. While we're at it, assert that the replica + * identity columns aren't null. + */ + heap_deform_tuple(tp, desc, values, nulls); + + for (int i = 0; i < desc->natts; i++) + { + if (bms_is_member(i + 1 - FirstLowInvalidHeapAttributeNumber, + idattrs)) + Assert(!nulls[i]); + else + nulls[i] = true; + } + + key_tuple = heap_form_tuple(desc, values, nulls); + *copy = true; + + bms_free(idattrs); + + /* + * If the tuple, which by here only contains indexed columns, still has + * toasted columns, force them to be inlined. This is somewhat unlikely + * since there's limits on the size of indexed columns, so we don't + * duplicate toast_flatten_tuple()s functionality in the above loop over + * the indexed columns, even if it would be more efficient. + */ + if (HeapTupleHasExternal(key_tuple)) + { + HeapTuple oldtup = key_tuple; + + key_tuple = toast_flatten_tuple(oldtup, desc); + heap_freetuple(oldtup); + } + + return key_tuple; +} + +/* + * Handles XLOG_HEAP2_PRUNE record type. + * + * Acquires a super-exclusive lock. + */ +static void +heap_xlog_prune(XLogReaderState *record) +{ + XLogRecPtr lsn = record->EndRecPtr; + xl_heap_prune *xlrec = (xl_heap_prune *) XLogRecGetData(record); + Buffer buffer; + RelFileNode rnode; + BlockNumber blkno; + XLogRedoAction action; + + XLogRecGetBlockTag(record, 0, &rnode, NULL, &blkno); + + /* + * We're about to remove tuples. In Hot Standby mode, ensure that there's + * no queries running for which the removed tuples are still visible. + */ + if (InHotStandby) + ResolveRecoveryConflictWithSnapshot(xlrec->latestRemovedXid, rnode); + + /* + * If we have a full-page image, restore it (using a cleanup lock) and + * we're done. + */ + action = XLogReadBufferForRedoExtended(record, 0, RBM_NORMAL, true, + &buffer); + if (action == BLK_NEEDS_REDO) + { + Page page = (Page) BufferGetPage(buffer); + OffsetNumber *end; + OffsetNumber *redirected; + OffsetNumber *nowdead; + OffsetNumber *nowunused; + int nredirected; + int ndead; + int nunused; + Size datalen; + + redirected = (OffsetNumber *) XLogRecGetBlockData(record, 0, &datalen); + + nredirected = xlrec->nredirected; + ndead = xlrec->ndead; + end = (OffsetNumber *) ((char *) redirected + datalen); + nowdead = redirected + (nredirected * 2); + nowunused = nowdead + ndead; + nunused = (end - nowunused); + Assert(nunused >= 0); + + /* Update all line pointers per the record, and repair fragmentation */ + heap_page_prune_execute(buffer, + redirected, nredirected, + nowdead, ndead, + nowunused, nunused); + + /* + * Note: we don't worry about updating the page's prunability hints. + * At worst this will cause an extra prune cycle to occur soon. + */ + + PageSetLSN(page, lsn); + MarkBufferDirty(buffer); + } + + if (BufferIsValid(buffer)) + { + Size freespace = PageGetHeapFreeSpace(BufferGetPage(buffer)); + + UnlockReleaseBuffer(buffer); + + /* + * After pruning records from a page, it's useful to update the FSM + * about it, as it may cause the page become target for insertions + * later even if vacuum decides not to visit it (which is possible if + * gets marked all-visible.) + * + * Do this regardless of a full-page image being applied, since the + * FSM data is not in the page anyway. + */ + XLogRecordPageWithFreeSpace(rnode, blkno, freespace); + } +} + +/* + * Handles XLOG_HEAP2_VACUUM record type. + * + * Acquires an exclusive lock only. + */ +static void +heap_xlog_vacuum(XLogReaderState *record) +{ + XLogRecPtr lsn = record->EndRecPtr; + xl_heap_vacuum *xlrec = (xl_heap_vacuum *) XLogRecGetData(record); + Buffer buffer; + BlockNumber blkno; + XLogRedoAction action; + + /* + * If we have a full-page image, restore it (without using a cleanup lock) + * and we're done. + */ + action = XLogReadBufferForRedoExtended(record, 0, RBM_NORMAL, false, + &buffer); + if (action == BLK_NEEDS_REDO) + { + Page page = (Page) BufferGetPage(buffer); + OffsetNumber *nowunused; + Size datalen; + OffsetNumber *offnum; + + nowunused = (OffsetNumber *) XLogRecGetBlockData(record, 0, &datalen); + + /* Shouldn't be a record unless there's something to do */ + Assert(xlrec->nunused > 0); + + /* Update all now-unused line pointers */ + offnum = nowunused; + for (int i = 0; i < xlrec->nunused; i++) + { + OffsetNumber off = *offnum++; + ItemId lp = PageGetItemId(page, off); + + Assert(ItemIdIsDead(lp) && !ItemIdHasStorage(lp)); + ItemIdSetUnused(lp); + } + + /* Attempt to truncate line pointer array now */ + PageTruncateLinePointerArray(page); + + PageSetLSN(page, lsn); + MarkBufferDirty(buffer); + } + + if (BufferIsValid(buffer)) + { + Size freespace = PageGetHeapFreeSpace(BufferGetPage(buffer)); + RelFileNode rnode; + + XLogRecGetBlockTag(record, 0, &rnode, NULL, &blkno); + + UnlockReleaseBuffer(buffer); + + /* + * After vacuuming LP_DEAD items from a page, it's useful to update + * the FSM about it, as it may cause the page become target for + * insertions later even if vacuum decides not to visit it (which is + * possible if gets marked all-visible.) + * + * Do this regardless of a full-page image being applied, since the + * FSM data is not in the page anyway. + */ + XLogRecordPageWithFreeSpace(rnode, blkno, freespace); + } +} + +/* + * Replay XLOG_HEAP2_VISIBLE record. + * + * The critical integrity requirement here is that we must never end up with + * a situation where the visibility map bit is set, and the page-level + * PD_ALL_VISIBLE bit is clear. If that were to occur, then a subsequent + * page modification would fail to clear the visibility map bit. + */ +static void +heap_xlog_visible(XLogReaderState *record) +{ + XLogRecPtr lsn = record->EndRecPtr; + xl_heap_visible *xlrec = (xl_heap_visible *) XLogRecGetData(record); + Buffer vmbuffer = InvalidBuffer; + Buffer buffer; + Page page; + RelFileNode rnode; + BlockNumber blkno; + XLogRedoAction action; + + XLogRecGetBlockTag(record, 1, &rnode, NULL, &blkno); + + /* + * If there are any Hot Standby transactions running that have an xmin + * horizon old enough that this page isn't all-visible for them, they + * might incorrectly decide that an index-only scan can skip a heap fetch. + * + * NB: It might be better to throw some kind of "soft" conflict here that + * forces any index-only scan that is in flight to perform heap fetches, + * rather than killing the transaction outright. + */ + if (InHotStandby) + ResolveRecoveryConflictWithSnapshot(xlrec->cutoff_xid, rnode); + + /* + * Read the heap page, if it still exists. If the heap file has dropped or + * truncated later in recovery, we don't need to update the page, but we'd + * better still update the visibility map. + */ + action = XLogReadBufferForRedo(record, 1, &buffer); + if (action == BLK_NEEDS_REDO) + { + /* + * We don't bump the LSN of the heap page when setting the visibility + * map bit (unless checksums or wal_hint_bits is enabled, in which + * case we must), because that would generate an unworkable volume of + * full-page writes. This exposes us to torn page hazards, but since + * we're not inspecting the existing page contents in any way, we + * don't care. + * + * However, all operations that clear the visibility map bit *do* bump + * the LSN, and those operations will only be replayed if the XLOG LSN + * follows the page LSN. Thus, if the page LSN has advanced past our + * XLOG record's LSN, we mustn't mark the page all-visible, because + * the subsequent update won't be replayed to clear the flag. + */ + page = BufferGetPage(buffer); + + PageSetAllVisible(page); + + MarkBufferDirty(buffer); + } + else if (action == BLK_RESTORED) + { + /* + * If heap block was backed up, we already restored it and there's + * nothing more to do. (This can only happen with checksums or + * wal_log_hints enabled.) + */ + } + + if (BufferIsValid(buffer)) + { + Size space = PageGetFreeSpace(BufferGetPage(buffer)); + + UnlockReleaseBuffer(buffer); + + /* + * Since FSM is not WAL-logged and only updated heuristically, it + * easily becomes stale in standbys. If the standby is later promoted + * and runs VACUUM, it will skip updating individual free space + * figures for pages that became all-visible (or all-frozen, depending + * on the vacuum mode,) which is troublesome when FreeSpaceMapVacuum + * propagates too optimistic free space values to upper FSM layers; + * later inserters try to use such pages only to find out that they + * are unusable. This can cause long stalls when there are many such + * pages. + * + * Forestall those problems by updating FSM's idea about a page that + * is becoming all-visible or all-frozen. + * + * Do this regardless of a full-page image being applied, since the + * FSM data is not in the page anyway. + */ + if (xlrec->flags & VISIBILITYMAP_VALID_BITS) + XLogRecordPageWithFreeSpace(rnode, blkno, space); + } + + /* + * Even if we skipped the heap page update due to the LSN interlock, it's + * still safe to update the visibility map. Any WAL record that clears + * the visibility map bit does so before checking the page LSN, so any + * bits that need to be cleared will still be cleared. + */ + if (XLogReadBufferForRedoExtended(record, 0, RBM_ZERO_ON_ERROR, false, + &vmbuffer) == BLK_NEEDS_REDO) + { + Page vmpage = BufferGetPage(vmbuffer); + Relation reln; + + /* initialize the page if it was read as zeros */ + if (PageIsNew(vmpage)) + PageInit(vmpage, BLCKSZ, 0); + + /* + * XLogReadBufferForRedoExtended locked the buffer. But + * visibilitymap_set will handle locking itself. + */ + LockBuffer(vmbuffer, BUFFER_LOCK_UNLOCK); + + reln = CreateFakeRelcacheEntry(rnode); + visibilitymap_pin(reln, blkno, &vmbuffer); + + /* + * Don't set the bit if replay has already passed this point. + * + * It might be safe to do this unconditionally; if replay has passed + * this point, we'll replay at least as far this time as we did + * before, and if this bit needs to be cleared, the record responsible + * for doing so should be again replayed, and clear it. For right + * now, out of an abundance of conservatism, we use the same test here + * we did for the heap page. If this results in a dropped bit, no + * real harm is done; and the next VACUUM will fix it. + */ + if (lsn > PageGetLSN(vmpage)) + visibilitymap_set(reln, blkno, InvalidBuffer, lsn, vmbuffer, + xlrec->cutoff_xid, xlrec->flags); + + ReleaseBuffer(vmbuffer); + FreeFakeRelcacheEntry(reln); + } + else if (BufferIsValid(vmbuffer)) + UnlockReleaseBuffer(vmbuffer); +} + +/* + * Replay XLOG_HEAP2_FREEZE_PAGE records + */ +static void +heap_xlog_freeze_page(XLogReaderState *record) +{ + XLogRecPtr lsn = record->EndRecPtr; + xl_heap_freeze_page *xlrec = (xl_heap_freeze_page *) XLogRecGetData(record); + TransactionId cutoff_xid = xlrec->cutoff_xid; + Buffer buffer; + int ntup; + + /* + * In Hot Standby mode, ensure that there's no queries running which still + * consider the frozen xids as running. + */ + if (InHotStandby) + { + RelFileNode rnode; + TransactionId latestRemovedXid = cutoff_xid; + + TransactionIdRetreat(latestRemovedXid); + + XLogRecGetBlockTag(record, 0, &rnode, NULL, NULL); + ResolveRecoveryConflictWithSnapshot(latestRemovedXid, rnode); + } + + if (XLogReadBufferForRedo(record, 0, &buffer) == BLK_NEEDS_REDO) + { + Page page = BufferGetPage(buffer); + xl_heap_freeze_tuple *tuples; + + tuples = (xl_heap_freeze_tuple *) XLogRecGetBlockData(record, 0, NULL); + + /* now execute freeze plan for each frozen tuple */ + for (ntup = 0; ntup < xlrec->ntuples; ntup++) + { + xl_heap_freeze_tuple *xlrec_tp; + ItemId lp; + HeapTupleHeader tuple; + + xlrec_tp = &tuples[ntup]; + lp = PageGetItemId(page, xlrec_tp->offset); /* offsets are one-based */ + tuple = (HeapTupleHeader) PageGetItem(page, lp); + + heap_execute_freeze_tuple(tuple, xlrec_tp); + } + + PageSetLSN(page, lsn); + MarkBufferDirty(buffer); + } + if (BufferIsValid(buffer)) + UnlockReleaseBuffer(buffer); +} + +/* + * Given an "infobits" field from an XLog record, set the correct bits in the + * given infomask and infomask2 for the tuple touched by the record. + * + * (This is the reverse of compute_infobits). + */ +static void +fix_infomask_from_infobits(uint8 infobits, uint16 *infomask, uint16 *infomask2) +{ + *infomask &= ~(HEAP_XMAX_IS_MULTI | HEAP_XMAX_LOCK_ONLY | + HEAP_XMAX_KEYSHR_LOCK | HEAP_XMAX_EXCL_LOCK); + *infomask2 &= ~HEAP_KEYS_UPDATED; + + if (infobits & XLHL_XMAX_IS_MULTI) + *infomask |= HEAP_XMAX_IS_MULTI; + if (infobits & XLHL_XMAX_LOCK_ONLY) + *infomask |= HEAP_XMAX_LOCK_ONLY; + if (infobits & XLHL_XMAX_EXCL_LOCK) + *infomask |= HEAP_XMAX_EXCL_LOCK; + /* note HEAP_XMAX_SHR_LOCK isn't considered here */ + if (infobits & XLHL_XMAX_KEYSHR_LOCK) + *infomask |= HEAP_XMAX_KEYSHR_LOCK; + + if (infobits & XLHL_KEYS_UPDATED) + *infomask2 |= HEAP_KEYS_UPDATED; +} + +static void +heap_xlog_delete(XLogReaderState *record) +{ + XLogRecPtr lsn = record->EndRecPtr; + xl_heap_delete *xlrec = (xl_heap_delete *) XLogRecGetData(record); + Buffer buffer; + Page page; + ItemId lp = NULL; + HeapTupleHeader htup; + BlockNumber blkno; + RelFileNode target_node; + ItemPointerData target_tid; + + XLogRecGetBlockTag(record, 0, &target_node, NULL, &blkno); + ItemPointerSetBlockNumber(&target_tid, blkno); + ItemPointerSetOffsetNumber(&target_tid, xlrec->offnum); + + /* + * The visibility map may need to be fixed even if the heap page is + * already up-to-date. + */ + if (xlrec->flags & XLH_DELETE_ALL_VISIBLE_CLEARED) + { + Relation reln = CreateFakeRelcacheEntry(target_node); + Buffer vmbuffer = InvalidBuffer; + + visibilitymap_pin(reln, blkno, &vmbuffer); + visibilitymap_clear(reln, blkno, vmbuffer, VISIBILITYMAP_VALID_BITS); + ReleaseBuffer(vmbuffer); + FreeFakeRelcacheEntry(reln); + } + + if (XLogReadBufferForRedo(record, 0, &buffer) == BLK_NEEDS_REDO) + { + page = BufferGetPage(buffer); + + if (PageGetMaxOffsetNumber(page) >= xlrec->offnum) + lp = PageGetItemId(page, xlrec->offnum); + + if (PageGetMaxOffsetNumber(page) < xlrec->offnum || !ItemIdIsNormal(lp)) + elog(PANIC, "invalid lp"); + + htup = (HeapTupleHeader) PageGetItem(page, lp); + + htup->t_infomask &= ~(HEAP_XMAX_BITS | HEAP_MOVED); + htup->t_infomask2 &= ~HEAP_KEYS_UPDATED; + HeapTupleHeaderClearHotUpdated(htup); + fix_infomask_from_infobits(xlrec->infobits_set, + &htup->t_infomask, &htup->t_infomask2); + if (!(xlrec->flags & XLH_DELETE_IS_SUPER)) + HeapTupleHeaderSetXmax(htup, xlrec->xmax); + else + HeapTupleHeaderSetXmin(htup, InvalidTransactionId); + HeapTupleHeaderSetCmax(htup, FirstCommandId, false); + + /* Mark the page as a candidate for pruning */ + PageSetPrunable(page, XLogRecGetXid(record)); + + if (xlrec->flags & XLH_DELETE_ALL_VISIBLE_CLEARED) + PageClearAllVisible(page); + + /* Make sure t_ctid is set correctly */ + if (xlrec->flags & XLH_DELETE_IS_PARTITION_MOVE) + HeapTupleHeaderSetMovedPartitions(htup); + else + htup->t_ctid = target_tid; + PageSetLSN(page, lsn); + MarkBufferDirty(buffer); + } + if (BufferIsValid(buffer)) + UnlockReleaseBuffer(buffer); +} + +static void +heap_xlog_insert(XLogReaderState *record) +{ + XLogRecPtr lsn = record->EndRecPtr; + xl_heap_insert *xlrec = (xl_heap_insert *) XLogRecGetData(record); + Buffer buffer; + Page page; + union + { + HeapTupleHeaderData hdr; + char data[MaxHeapTupleSize]; + } tbuf; + HeapTupleHeader htup; + xl_heap_header xlhdr; + uint32 newlen; + Size freespace = 0; + RelFileNode target_node; + BlockNumber blkno; + ItemPointerData target_tid; + XLogRedoAction action; + + XLogRecGetBlockTag(record, 0, &target_node, NULL, &blkno); + ItemPointerSetBlockNumber(&target_tid, blkno); + ItemPointerSetOffsetNumber(&target_tid, xlrec->offnum); + + /* + * The visibility map may need to be fixed even if the heap page is + * already up-to-date. + */ + if (xlrec->flags & XLH_INSERT_ALL_VISIBLE_CLEARED) + { + Relation reln = CreateFakeRelcacheEntry(target_node); + Buffer vmbuffer = InvalidBuffer; + + visibilitymap_pin(reln, blkno, &vmbuffer); + visibilitymap_clear(reln, blkno, vmbuffer, VISIBILITYMAP_VALID_BITS); + ReleaseBuffer(vmbuffer); + FreeFakeRelcacheEntry(reln); + } + + /* + * If we inserted the first and only tuple on the page, re-initialize the + * page from scratch. + */ + if (XLogRecGetInfo(record) & XLOG_HEAP_INIT_PAGE) + { + buffer = XLogInitBufferForRedo(record, 0); + page = BufferGetPage(buffer); + PageInit(page, BufferGetPageSize(buffer), 0); + action = BLK_NEEDS_REDO; + } + else + action = XLogReadBufferForRedo(record, 0, &buffer); + if (action == BLK_NEEDS_REDO) + { + Size datalen; + char *data; + + page = BufferGetPage(buffer); + + if (PageGetMaxOffsetNumber(page) + 1 < xlrec->offnum) + elog(PANIC, "invalid max offset number"); + + data = XLogRecGetBlockData(record, 0, &datalen); + + newlen = datalen - SizeOfHeapHeader; + Assert(datalen > SizeOfHeapHeader && newlen <= MaxHeapTupleSize); + memcpy((char *) &xlhdr, data, SizeOfHeapHeader); + data += SizeOfHeapHeader; + + htup = &tbuf.hdr; + MemSet((char *) htup, 0, SizeofHeapTupleHeader); + /* PG73FORMAT: get bitmap [+ padding] [+ oid] + data */ + memcpy((char *) htup + SizeofHeapTupleHeader, + data, + newlen); + newlen += SizeofHeapTupleHeader; + htup->t_infomask2 = xlhdr.t_infomask2; + htup->t_infomask = xlhdr.t_infomask; + htup->t_hoff = xlhdr.t_hoff; + HeapTupleHeaderSetXmin(htup, XLogRecGetXid(record)); + HeapTupleHeaderSetCmin(htup, FirstCommandId); + htup->t_ctid = target_tid; + + if (PageAddItem(page, (Item) htup, newlen, xlrec->offnum, + true, true) == InvalidOffsetNumber) + elog(PANIC, "failed to add tuple"); + + freespace = PageGetHeapFreeSpace(page); /* needed to update FSM below */ + + PageSetLSN(page, lsn); + + if (xlrec->flags & XLH_INSERT_ALL_VISIBLE_CLEARED) + PageClearAllVisible(page); + + /* XLH_INSERT_ALL_FROZEN_SET implies that all tuples are visible */ + if (xlrec->flags & XLH_INSERT_ALL_FROZEN_SET) + PageSetAllVisible(page); + + MarkBufferDirty(buffer); + } + if (BufferIsValid(buffer)) + UnlockReleaseBuffer(buffer); + + /* + * If the page is running low on free space, update the FSM as well. + * Arbitrarily, our definition of "low" is less than 20%. We can't do much + * better than that without knowing the fill-factor for the table. + * + * XXX: Don't do this if the page was restored from full page image. We + * don't bother to update the FSM in that case, it doesn't need to be + * totally accurate anyway. + */ + if (action == BLK_NEEDS_REDO && freespace < BLCKSZ / 5) + XLogRecordPageWithFreeSpace(target_node, blkno, freespace); +} + +/* + * Handles MULTI_INSERT record type. + */ +static void +heap_xlog_multi_insert(XLogReaderState *record) +{ + XLogRecPtr lsn = record->EndRecPtr; + xl_heap_multi_insert *xlrec; + RelFileNode rnode; + BlockNumber blkno; + Buffer buffer; + Page page; + union + { + HeapTupleHeaderData hdr; + char data[MaxHeapTupleSize]; + } tbuf; + HeapTupleHeader htup; + uint32 newlen; + Size freespace = 0; + int i; + bool isinit = (XLogRecGetInfo(record) & XLOG_HEAP_INIT_PAGE) != 0; + XLogRedoAction action; + + /* + * Insertion doesn't overwrite MVCC data, so no conflict processing is + * required. + */ + xlrec = (xl_heap_multi_insert *) XLogRecGetData(record); + + XLogRecGetBlockTag(record, 0, &rnode, NULL, &blkno); + + /* check that the mutually exclusive flags are not both set */ + Assert(!((xlrec->flags & XLH_INSERT_ALL_VISIBLE_CLEARED) && + (xlrec->flags & XLH_INSERT_ALL_FROZEN_SET))); + + /* + * The visibility map may need to be fixed even if the heap page is + * already up-to-date. + */ + if (xlrec->flags & XLH_INSERT_ALL_VISIBLE_CLEARED) + { + Relation reln = CreateFakeRelcacheEntry(rnode); + Buffer vmbuffer = InvalidBuffer; + + visibilitymap_pin(reln, blkno, &vmbuffer); + visibilitymap_clear(reln, blkno, vmbuffer, VISIBILITYMAP_VALID_BITS); + ReleaseBuffer(vmbuffer); + FreeFakeRelcacheEntry(reln); + } + + if (isinit) + { + buffer = XLogInitBufferForRedo(record, 0); + page = BufferGetPage(buffer); + PageInit(page, BufferGetPageSize(buffer), 0); + action = BLK_NEEDS_REDO; + } + else + action = XLogReadBufferForRedo(record, 0, &buffer); + if (action == BLK_NEEDS_REDO) + { + char *tupdata; + char *endptr; + Size len; + + /* Tuples are stored as block data */ + tupdata = XLogRecGetBlockData(record, 0, &len); + endptr = tupdata + len; + + page = (Page) BufferGetPage(buffer); + + for (i = 0; i < xlrec->ntuples; i++) + { + OffsetNumber offnum; + xl_multi_insert_tuple *xlhdr; + + /* + * If we're reinitializing the page, the tuples are stored in + * order from FirstOffsetNumber. Otherwise there's an array of + * offsets in the WAL record, and the tuples come after that. + */ + if (isinit) + offnum = FirstOffsetNumber + i; + else + offnum = xlrec->offsets[i]; + if (PageGetMaxOffsetNumber(page) + 1 < offnum) + elog(PANIC, "invalid max offset number"); + + xlhdr = (xl_multi_insert_tuple *) SHORTALIGN(tupdata); + tupdata = ((char *) xlhdr) + SizeOfMultiInsertTuple; + + newlen = xlhdr->datalen; + Assert(newlen <= MaxHeapTupleSize); + htup = &tbuf.hdr; + MemSet((char *) htup, 0, SizeofHeapTupleHeader); + /* PG73FORMAT: get bitmap [+ padding] [+ oid] + data */ + memcpy((char *) htup + SizeofHeapTupleHeader, + (char *) tupdata, + newlen); + tupdata += newlen; + + newlen += SizeofHeapTupleHeader; + htup->t_infomask2 = xlhdr->t_infomask2; + htup->t_infomask = xlhdr->t_infomask; + htup->t_hoff = xlhdr->t_hoff; + HeapTupleHeaderSetXmin(htup, XLogRecGetXid(record)); + HeapTupleHeaderSetCmin(htup, FirstCommandId); + ItemPointerSetBlockNumber(&htup->t_ctid, blkno); + ItemPointerSetOffsetNumber(&htup->t_ctid, offnum); + + offnum = PageAddItem(page, (Item) htup, newlen, offnum, true, true); + if (offnum == InvalidOffsetNumber) + elog(PANIC, "failed to add tuple"); + } + if (tupdata != endptr) + elog(PANIC, "total tuple length mismatch"); + + freespace = PageGetHeapFreeSpace(page); /* needed to update FSM below */ + + PageSetLSN(page, lsn); + + if (xlrec->flags & XLH_INSERT_ALL_VISIBLE_CLEARED) + PageClearAllVisible(page); + + /* XLH_INSERT_ALL_FROZEN_SET implies that all tuples are visible */ + if (xlrec->flags & XLH_INSERT_ALL_FROZEN_SET) + PageSetAllVisible(page); + + MarkBufferDirty(buffer); + } + if (BufferIsValid(buffer)) + UnlockReleaseBuffer(buffer); + + /* + * If the page is running low on free space, update the FSM as well. + * Arbitrarily, our definition of "low" is less than 20%. We can't do much + * better than that without knowing the fill-factor for the table. + * + * XXX: Don't do this if the page was restored from full page image. We + * don't bother to update the FSM in that case, it doesn't need to be + * totally accurate anyway. + */ + if (action == BLK_NEEDS_REDO && freespace < BLCKSZ / 5) + XLogRecordPageWithFreeSpace(rnode, blkno, freespace); +} + +/* + * Handles UPDATE and HOT_UPDATE + */ +static void +heap_xlog_update(XLogReaderState *record, bool hot_update) +{ + XLogRecPtr lsn = record->EndRecPtr; + xl_heap_update *xlrec = (xl_heap_update *) XLogRecGetData(record); + RelFileNode rnode; + BlockNumber oldblk; + BlockNumber newblk; + ItemPointerData newtid; + Buffer obuffer, + nbuffer; + Page page; + OffsetNumber offnum; + ItemId lp = NULL; + HeapTupleData oldtup; + HeapTupleHeader htup; + uint16 prefixlen = 0, + suffixlen = 0; + char *newp; + union + { + HeapTupleHeaderData hdr; + char data[MaxHeapTupleSize]; + } tbuf; + xl_heap_header xlhdr; + uint32 newlen; + Size freespace = 0; + XLogRedoAction oldaction; + XLogRedoAction newaction; + + /* initialize to keep the compiler quiet */ + oldtup.t_data = NULL; + oldtup.t_len = 0; + + XLogRecGetBlockTag(record, 0, &rnode, NULL, &newblk); + if (XLogRecGetBlockTag(record, 1, NULL, NULL, &oldblk)) + { + /* HOT updates are never done across pages */ + Assert(!hot_update); + } + else + oldblk = newblk; + + ItemPointerSet(&newtid, newblk, xlrec->new_offnum); + + /* + * The visibility map may need to be fixed even if the heap page is + * already up-to-date. + */ + if (xlrec->flags & XLH_UPDATE_OLD_ALL_VISIBLE_CLEARED) + { + Relation reln = CreateFakeRelcacheEntry(rnode); + Buffer vmbuffer = InvalidBuffer; + + visibilitymap_pin(reln, oldblk, &vmbuffer); + visibilitymap_clear(reln, oldblk, vmbuffer, VISIBILITYMAP_VALID_BITS); + ReleaseBuffer(vmbuffer); + FreeFakeRelcacheEntry(reln); + } + + /* + * In normal operation, it is important to lock the two pages in + * page-number order, to avoid possible deadlocks against other update + * operations going the other way. However, during WAL replay there can + * be no other update happening, so we don't need to worry about that. But + * we *do* need to worry that we don't expose an inconsistent state to Hot + * Standby queries --- so the original page can't be unlocked before we've + * added the new tuple to the new page. + */ + + /* Deal with old tuple version */ + oldaction = XLogReadBufferForRedo(record, (oldblk == newblk) ? 0 : 1, + &obuffer); + if (oldaction == BLK_NEEDS_REDO) + { + page = BufferGetPage(obuffer); + offnum = xlrec->old_offnum; + if (PageGetMaxOffsetNumber(page) >= offnum) + lp = PageGetItemId(page, offnum); + + if (PageGetMaxOffsetNumber(page) < offnum || !ItemIdIsNormal(lp)) + elog(PANIC, "invalid lp"); + + htup = (HeapTupleHeader) PageGetItem(page, lp); + + oldtup.t_data = htup; + oldtup.t_len = ItemIdGetLength(lp); + + htup->t_infomask &= ~(HEAP_XMAX_BITS | HEAP_MOVED); + htup->t_infomask2 &= ~HEAP_KEYS_UPDATED; + if (hot_update) + HeapTupleHeaderSetHotUpdated(htup); + else + HeapTupleHeaderClearHotUpdated(htup); + fix_infomask_from_infobits(xlrec->old_infobits_set, &htup->t_infomask, + &htup->t_infomask2); + HeapTupleHeaderSetXmax(htup, xlrec->old_xmax); + HeapTupleHeaderSetCmax(htup, FirstCommandId, false); + /* Set forward chain link in t_ctid */ + htup->t_ctid = newtid; + + /* Mark the page as a candidate for pruning */ + PageSetPrunable(page, XLogRecGetXid(record)); + + if (xlrec->flags & XLH_UPDATE_OLD_ALL_VISIBLE_CLEARED) + PageClearAllVisible(page); + + PageSetLSN(page, lsn); + MarkBufferDirty(obuffer); + } + + /* + * Read the page the new tuple goes into, if different from old. + */ + if (oldblk == newblk) + { + nbuffer = obuffer; + newaction = oldaction; + } + else if (XLogRecGetInfo(record) & XLOG_HEAP_INIT_PAGE) + { + nbuffer = XLogInitBufferForRedo(record, 0); + page = (Page) BufferGetPage(nbuffer); + PageInit(page, BufferGetPageSize(nbuffer), 0); + newaction = BLK_NEEDS_REDO; + } + else + newaction = XLogReadBufferForRedo(record, 0, &nbuffer); + + /* + * The visibility map may need to be fixed even if the heap page is + * already up-to-date. + */ + if (xlrec->flags & XLH_UPDATE_NEW_ALL_VISIBLE_CLEARED) + { + Relation reln = CreateFakeRelcacheEntry(rnode); + Buffer vmbuffer = InvalidBuffer; + + visibilitymap_pin(reln, newblk, &vmbuffer); + visibilitymap_clear(reln, newblk, vmbuffer, VISIBILITYMAP_VALID_BITS); + ReleaseBuffer(vmbuffer); + FreeFakeRelcacheEntry(reln); + } + + /* Deal with new tuple */ + if (newaction == BLK_NEEDS_REDO) + { + char *recdata; + char *recdata_end; + Size datalen; + Size tuplen; + + recdata = XLogRecGetBlockData(record, 0, &datalen); + recdata_end = recdata + datalen; + + page = BufferGetPage(nbuffer); + + offnum = xlrec->new_offnum; + if (PageGetMaxOffsetNumber(page) + 1 < offnum) + elog(PANIC, "invalid max offset number"); + + if (xlrec->flags & XLH_UPDATE_PREFIX_FROM_OLD) + { + Assert(newblk == oldblk); + memcpy(&prefixlen, recdata, sizeof(uint16)); + recdata += sizeof(uint16); + } + if (xlrec->flags & XLH_UPDATE_SUFFIX_FROM_OLD) + { + Assert(newblk == oldblk); + memcpy(&suffixlen, recdata, sizeof(uint16)); + recdata += sizeof(uint16); + } + + memcpy((char *) &xlhdr, recdata, SizeOfHeapHeader); + recdata += SizeOfHeapHeader; + + tuplen = recdata_end - recdata; + Assert(tuplen <= MaxHeapTupleSize); + + htup = &tbuf.hdr; + MemSet((char *) htup, 0, SizeofHeapTupleHeader); + + /* + * Reconstruct the new tuple using the prefix and/or suffix from the + * old tuple, and the data stored in the WAL record. + */ + newp = (char *) htup + SizeofHeapTupleHeader; + if (prefixlen > 0) + { + int len; + + /* copy bitmap [+ padding] [+ oid] from WAL record */ + len = xlhdr.t_hoff - SizeofHeapTupleHeader; + memcpy(newp, recdata, len); + recdata += len; + newp += len; + + /* copy prefix from old tuple */ + memcpy(newp, (char *) oldtup.t_data + oldtup.t_data->t_hoff, prefixlen); + newp += prefixlen; + + /* copy new tuple data from WAL record */ + len = tuplen - (xlhdr.t_hoff - SizeofHeapTupleHeader); + memcpy(newp, recdata, len); + recdata += len; + newp += len; + } + else + { + /* + * copy bitmap [+ padding] [+ oid] + data from record, all in one + * go + */ + memcpy(newp, recdata, tuplen); + recdata += tuplen; + newp += tuplen; + } + Assert(recdata == recdata_end); + + /* copy suffix from old tuple */ + if (suffixlen > 0) + memcpy(newp, (char *) oldtup.t_data + oldtup.t_len - suffixlen, suffixlen); + + newlen = SizeofHeapTupleHeader + tuplen + prefixlen + suffixlen; + htup->t_infomask2 = xlhdr.t_infomask2; + htup->t_infomask = xlhdr.t_infomask; + htup->t_hoff = xlhdr.t_hoff; + + HeapTupleHeaderSetXmin(htup, XLogRecGetXid(record)); + HeapTupleHeaderSetCmin(htup, FirstCommandId); + HeapTupleHeaderSetXmax(htup, xlrec->new_xmax); + /* Make sure there is no forward chain link in t_ctid */ + htup->t_ctid = newtid; + + offnum = PageAddItem(page, (Item) htup, newlen, offnum, true, true); + if (offnum == InvalidOffsetNumber) + elog(PANIC, "failed to add tuple"); + + if (xlrec->flags & XLH_UPDATE_NEW_ALL_VISIBLE_CLEARED) + PageClearAllVisible(page); + + freespace = PageGetHeapFreeSpace(page); /* needed to update FSM below */ + + PageSetLSN(page, lsn); + MarkBufferDirty(nbuffer); + } + + if (BufferIsValid(nbuffer) && nbuffer != obuffer) + UnlockReleaseBuffer(nbuffer); + if (BufferIsValid(obuffer)) + UnlockReleaseBuffer(obuffer); + + /* + * If the new page is running low on free space, update the FSM as well. + * Arbitrarily, our definition of "low" is less than 20%. We can't do much + * better than that without knowing the fill-factor for the table. + * + * However, don't update the FSM on HOT updates, because after crash + * recovery, either the old or the new tuple will certainly be dead and + * prunable. After pruning, the page will have roughly as much free space + * as it did before the update, assuming the new tuple is about the same + * size as the old one. + * + * XXX: Don't do this if the page was restored from full page image. We + * don't bother to update the FSM in that case, it doesn't need to be + * totally accurate anyway. + */ + if (newaction == BLK_NEEDS_REDO && !hot_update && freespace < BLCKSZ / 5) + XLogRecordPageWithFreeSpace(rnode, newblk, freespace); +} + +static void +heap_xlog_confirm(XLogReaderState *record) +{ + XLogRecPtr lsn = record->EndRecPtr; + xl_heap_confirm *xlrec = (xl_heap_confirm *) XLogRecGetData(record); + Buffer buffer; + Page page; + OffsetNumber offnum; + ItemId lp = NULL; + HeapTupleHeader htup; + + if (XLogReadBufferForRedo(record, 0, &buffer) == BLK_NEEDS_REDO) + { + page = BufferGetPage(buffer); + + offnum = xlrec->offnum; + if (PageGetMaxOffsetNumber(page) >= offnum) + lp = PageGetItemId(page, offnum); + + if (PageGetMaxOffsetNumber(page) < offnum || !ItemIdIsNormal(lp)) + elog(PANIC, "invalid lp"); + + htup = (HeapTupleHeader) PageGetItem(page, lp); + + /* + * Confirm tuple as actually inserted + */ + ItemPointerSet(&htup->t_ctid, BufferGetBlockNumber(buffer), offnum); + + PageSetLSN(page, lsn); + MarkBufferDirty(buffer); + } + if (BufferIsValid(buffer)) + UnlockReleaseBuffer(buffer); +} + +static void +heap_xlog_lock(XLogReaderState *record) +{ + XLogRecPtr lsn = record->EndRecPtr; + xl_heap_lock *xlrec = (xl_heap_lock *) XLogRecGetData(record); + Buffer buffer; + Page page; + OffsetNumber offnum; + ItemId lp = NULL; + HeapTupleHeader htup; + + /* + * The visibility map may need to be fixed even if the heap page is + * already up-to-date. + */ + if (xlrec->flags & XLH_LOCK_ALL_FROZEN_CLEARED) + { + RelFileNode rnode; + Buffer vmbuffer = InvalidBuffer; + BlockNumber block; + Relation reln; + + XLogRecGetBlockTag(record, 0, &rnode, NULL, &block); + reln = CreateFakeRelcacheEntry(rnode); + + visibilitymap_pin(reln, block, &vmbuffer); + visibilitymap_clear(reln, block, vmbuffer, VISIBILITYMAP_ALL_FROZEN); + + ReleaseBuffer(vmbuffer); + FreeFakeRelcacheEntry(reln); + } + + if (XLogReadBufferForRedo(record, 0, &buffer) == BLK_NEEDS_REDO) + { + page = (Page) BufferGetPage(buffer); + + offnum = xlrec->offnum; + if (PageGetMaxOffsetNumber(page) >= offnum) + lp = PageGetItemId(page, offnum); + + if (PageGetMaxOffsetNumber(page) < offnum || !ItemIdIsNormal(lp)) + elog(PANIC, "invalid lp"); + + htup = (HeapTupleHeader) PageGetItem(page, lp); + + htup->t_infomask &= ~(HEAP_XMAX_BITS | HEAP_MOVED); + htup->t_infomask2 &= ~HEAP_KEYS_UPDATED; + fix_infomask_from_infobits(xlrec->infobits_set, &htup->t_infomask, + &htup->t_infomask2); + + /* + * Clear relevant update flags, but only if the modified infomask says + * there's no update. + */ + if (HEAP_XMAX_IS_LOCKED_ONLY(htup->t_infomask)) + { + HeapTupleHeaderClearHotUpdated(htup); + /* Make sure there is no forward chain link in t_ctid */ + ItemPointerSet(&htup->t_ctid, + BufferGetBlockNumber(buffer), + offnum); + } + HeapTupleHeaderSetXmax(htup, xlrec->locking_xid); + HeapTupleHeaderSetCmax(htup, FirstCommandId, false); + PageSetLSN(page, lsn); + MarkBufferDirty(buffer); + } + if (BufferIsValid(buffer)) + UnlockReleaseBuffer(buffer); +} + +static void +heap_xlog_lock_updated(XLogReaderState *record) +{ + XLogRecPtr lsn = record->EndRecPtr; + xl_heap_lock_updated *xlrec; + Buffer buffer; + Page page; + OffsetNumber offnum; + ItemId lp = NULL; + HeapTupleHeader htup; + + xlrec = (xl_heap_lock_updated *) XLogRecGetData(record); + + /* + * The visibility map may need to be fixed even if the heap page is + * already up-to-date. + */ + if (xlrec->flags & XLH_LOCK_ALL_FROZEN_CLEARED) + { + RelFileNode rnode; + Buffer vmbuffer = InvalidBuffer; + BlockNumber block; + Relation reln; + + XLogRecGetBlockTag(record, 0, &rnode, NULL, &block); + reln = CreateFakeRelcacheEntry(rnode); + + visibilitymap_pin(reln, block, &vmbuffer); + visibilitymap_clear(reln, block, vmbuffer, VISIBILITYMAP_ALL_FROZEN); + + ReleaseBuffer(vmbuffer); + FreeFakeRelcacheEntry(reln); + } + + if (XLogReadBufferForRedo(record, 0, &buffer) == BLK_NEEDS_REDO) + { + page = BufferGetPage(buffer); + + offnum = xlrec->offnum; + if (PageGetMaxOffsetNumber(page) >= offnum) + lp = PageGetItemId(page, offnum); + + if (PageGetMaxOffsetNumber(page) < offnum || !ItemIdIsNormal(lp)) + elog(PANIC, "invalid lp"); + + htup = (HeapTupleHeader) PageGetItem(page, lp); + + htup->t_infomask &= ~(HEAP_XMAX_BITS | HEAP_MOVED); + htup->t_infomask2 &= ~HEAP_KEYS_UPDATED; + fix_infomask_from_infobits(xlrec->infobits_set, &htup->t_infomask, + &htup->t_infomask2); + HeapTupleHeaderSetXmax(htup, xlrec->xmax); + + PageSetLSN(page, lsn); + MarkBufferDirty(buffer); + } + if (BufferIsValid(buffer)) + UnlockReleaseBuffer(buffer); +} + +static void +heap_xlog_inplace(XLogReaderState *record) +{ + XLogRecPtr lsn = record->EndRecPtr; + xl_heap_inplace *xlrec = (xl_heap_inplace *) XLogRecGetData(record); + Buffer buffer; + Page page; + OffsetNumber offnum; + ItemId lp = NULL; + HeapTupleHeader htup; + uint32 oldlen; + Size newlen; + + if (XLogReadBufferForRedo(record, 0, &buffer) == BLK_NEEDS_REDO) + { + char *newtup = XLogRecGetBlockData(record, 0, &newlen); + + page = BufferGetPage(buffer); + + offnum = xlrec->offnum; + if (PageGetMaxOffsetNumber(page) >= offnum) + lp = PageGetItemId(page, offnum); + + if (PageGetMaxOffsetNumber(page) < offnum || !ItemIdIsNormal(lp)) + elog(PANIC, "invalid lp"); + + htup = (HeapTupleHeader) PageGetItem(page, lp); + + oldlen = ItemIdGetLength(lp) - htup->t_hoff; + if (oldlen != newlen) + elog(PANIC, "wrong tuple length"); + + memcpy((char *) htup + htup->t_hoff, newtup, newlen); + + PageSetLSN(page, lsn); + MarkBufferDirty(buffer); + } + if (BufferIsValid(buffer)) + UnlockReleaseBuffer(buffer); +} + +void +heap_redo(XLogReaderState *record) +{ + uint8 info = XLogRecGetInfo(record) & ~XLR_INFO_MASK; + + /* + * These operations don't overwrite MVCC data so no conflict processing is + * required. The ones in heap2 rmgr do. + */ + + switch (info & XLOG_HEAP_OPMASK) + { + case XLOG_HEAP_INSERT: + heap_xlog_insert(record); + break; + case XLOG_HEAP_DELETE: + heap_xlog_delete(record); + break; + case XLOG_HEAP_UPDATE: + heap_xlog_update(record, false); + break; + case XLOG_HEAP_TRUNCATE: + + /* + * TRUNCATE is a no-op because the actions are already logged as + * SMGR WAL records. TRUNCATE WAL record only exists for logical + * decoding. + */ + break; + case XLOG_HEAP_HOT_UPDATE: + heap_xlog_update(record, true); + break; + case XLOG_HEAP_CONFIRM: + heap_xlog_confirm(record); + break; + case XLOG_HEAP_LOCK: + heap_xlog_lock(record); + break; + case XLOG_HEAP_INPLACE: + heap_xlog_inplace(record); + break; + default: + elog(PANIC, "heap_redo: unknown op code %u", info); + } +} + +void +heap2_redo(XLogReaderState *record) +{ + uint8 info = XLogRecGetInfo(record) & ~XLR_INFO_MASK; + + switch (info & XLOG_HEAP_OPMASK) + { + case XLOG_HEAP2_PRUNE: + heap_xlog_prune(record); + break; + case XLOG_HEAP2_VACUUM: + heap_xlog_vacuum(record); + break; + case XLOG_HEAP2_FREEZE_PAGE: + heap_xlog_freeze_page(record); + break; + case XLOG_HEAP2_VISIBLE: + heap_xlog_visible(record); + break; + case XLOG_HEAP2_MULTI_INSERT: + heap_xlog_multi_insert(record); + break; + case XLOG_HEAP2_LOCK_UPDATED: + heap_xlog_lock_updated(record); + break; + case XLOG_HEAP2_NEW_CID: + + /* + * Nothing to do on a real replay, only used during logical + * decoding. + */ + break; + case XLOG_HEAP2_REWRITE: + heap_xlog_logical_rewrite(record); + break; + default: + elog(PANIC, "heap2_redo: unknown op code %u", info); + } +} + +/* + * Mask a heap page before performing consistency checks on it. + */ +void +heap_mask(char *pagedata, BlockNumber blkno) +{ + Page page = (Page) pagedata; + OffsetNumber off; + + mask_page_lsn_and_checksum(page); + + mask_page_hint_bits(page); + mask_unused_space(page); + + for (off = 1; off <= PageGetMaxOffsetNumber(page); off++) + { + ItemId iid = PageGetItemId(page, off); + char *page_item; + + page_item = (char *) (page + ItemIdGetOffset(iid)); + + if (ItemIdIsNormal(iid)) + { + HeapTupleHeader page_htup = (HeapTupleHeader) page_item; + + /* + * If xmin of a tuple is not yet frozen, we should ignore + * differences in hint bits, since they can be set without + * emitting WAL. + */ + if (!HeapTupleHeaderXminFrozen(page_htup)) + page_htup->t_infomask &= ~HEAP_XACT_MASK; + else + { + /* Still we need to mask xmax hint bits. */ + page_htup->t_infomask &= ~HEAP_XMAX_INVALID; + page_htup->t_infomask &= ~HEAP_XMAX_COMMITTED; + } + + /* + * During replay, we set Command Id to FirstCommandId. Hence, mask + * it. See heap_xlog_insert() for details. + */ + page_htup->t_choice.t_heap.t_field3.t_cid = MASK_MARKER; + + /* + * For a speculative tuple, heap_insert() does not set ctid in the + * caller-passed heap tuple itself, leaving the ctid field to + * contain a speculative token value - a per-backend monotonically + * increasing identifier. Besides, it does not WAL-log ctid under + * any circumstances. + * + * During redo, heap_xlog_insert() sets t_ctid to current block + * number and self offset number. It doesn't care about any + * speculative insertions on the primary. Hence, we set t_ctid to + * current block number and self offset number to ignore any + * inconsistency. + */ + if (HeapTupleHeaderIsSpeculative(page_htup)) + ItemPointerSet(&page_htup->t_ctid, blkno, off); + + /* + * NB: Not ignoring ctid changes due to the tuple having moved + * (i.e. HeapTupleHeaderIndicatesMovedPartitions), because that's + * important information that needs to be in-sync between primary + * and standby, and thus is WAL logged. + */ + } + + /* + * Ignore any padding bytes after the tuple, when the length of the + * item is not MAXALIGNed. + */ + if (ItemIdHasStorage(iid)) + { + int len = ItemIdGetLength(iid); + int padlen = MAXALIGN(len) - len; + + if (padlen > 0) + memset(page_item + len, MASK_MARKER, padlen); + } + } +} + +/* + * HeapCheckForSerializableConflictOut + * We are reading a tuple. If it's not visible, there may be a + * rw-conflict out with the inserter. Otherwise, if it is visible to us + * but has been deleted, there may be a rw-conflict out with the deleter. + * + * We will determine the top level xid of the writing transaction with which + * we may be in conflict, and ask CheckForSerializableConflictOut() to check + * for overlap with our own transaction. + * + * This function should be called just about anywhere in heapam.c where a + * tuple has been read. The caller must hold at least a shared lock on the + * buffer, because this function might set hint bits on the tuple. There is + * currently no known reason to call this function from an index AM. + */ +void +HeapCheckForSerializableConflictOut(bool visible, Relation relation, + HeapTuple tuple, Buffer buffer, + Snapshot snapshot) +{ + TransactionId xid; + HTSV_Result htsvResult; + + if (!CheckForSerializableConflictOutNeeded(relation, snapshot)) + return; + + /* + * Check to see whether the tuple has been written to by a concurrent + * transaction, either to create it not visible to us, or to delete it + * while it is visible to us. The "visible" bool indicates whether the + * tuple is visible to us, while HeapTupleSatisfiesVacuum checks what else + * is going on with it. + * + * In the event of a concurrently inserted tuple that also happens to have + * been concurrently updated (by a separate transaction), the xmin of the + * tuple will be used -- not the updater's xid. + */ + htsvResult = HeapTupleSatisfiesVacuum(tuple, TransactionXmin, buffer); + switch (htsvResult) + { + case HEAPTUPLE_LIVE: + if (visible) + return; + xid = HeapTupleHeaderGetXmin(tuple->t_data); + break; + case HEAPTUPLE_RECENTLY_DEAD: + case HEAPTUPLE_DELETE_IN_PROGRESS: + if (visible) + xid = HeapTupleHeaderGetUpdateXid(tuple->t_data); + else + xid = HeapTupleHeaderGetXmin(tuple->t_data); + + if (TransactionIdPrecedes(xid, TransactionXmin)) + { + /* This is like the HEAPTUPLE_DEAD case */ + Assert(!visible); + return; + } + break; + case HEAPTUPLE_INSERT_IN_PROGRESS: + xid = HeapTupleHeaderGetXmin(tuple->t_data); + break; + case HEAPTUPLE_DEAD: + Assert(!visible); + return; + default: + + /* + * The only way to get to this default clause is if a new value is + * added to the enum type without adding it to this switch + * statement. That's a bug, so elog. + */ + elog(ERROR, "unrecognized return value from HeapTupleSatisfiesVacuum: %u", htsvResult); + + /* + * In spite of having all enum values covered and calling elog on + * this default, some compilers think this is a code path which + * allows xid to be used below without initialization. Silence + * that warning. + */ + xid = InvalidTransactionId; + } + + Assert(TransactionIdIsValid(xid)); + Assert(TransactionIdFollowsOrEquals(xid, TransactionXmin)); + + /* + * Find top level xid. Bail out if xid is too early to be a conflict, or + * if it's our own xid. + */ + if (TransactionIdEquals(xid, GetTopTransactionIdIfAny())) + return; + xid = SubTransGetTopmostTransaction(xid); + if (TransactionIdPrecedes(xid, TransactionXmin)) + return; + + CheckForSerializableConflictOut(relation, xid, snapshot); +} |